ClosetMaid 25" Organizer Doors 4 Drawer Installation Instructions

ClosetMaid 25" Organizer   Doors   4 Drawer Installation Instructions
SuiteSymphony Combo Kits
Installation Tips
Kit E
1935940
04/18
Tools you will need for assembly:
.25 in.
.50 in.
© 2018 ClosetMaid LLC | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com | www.closetmaid.ca
Getting Started
•
Please refer to the instruction sheet provided in the product package for the specifics on required
& recommended tools for the assembly of the products.
•
Take an inventory of the parts for the products purchased to insure you have everything you need
for the installation.
•
Pre-plan the placement of the towers.
General Tips
•
Assemble and build your towers.
•
Place your towers, making sure to affix them to the wall as directed.
•
Measure the length that the rods will need to be for each side. Make sure the span between units
or unit and wall is not greater than 48 in. The top shelves and closet rods fit a maximum space of
48 in.
•
The expandable closet rods are 30 in. to 48 in. long. If the length is shorter than 30 in. the rod will
need to be cut.
•
Install the closet rods and top shelves.
•
Assemble and install any drawers into the tower unit (sold separately).
Parts List
3 - Top Shelf Support Kit
2 - 5 In. W x 10 In.
2 - 25
1 - 25 In. Starter Kit
3 - 48 In. Top Shelf
1 - 25 in. Door Pair
© 2018 ClosetMaid LLC | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com | www.closetmaid.ca
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement