Midas DM12 Quick Start Guide

Midas DM12 Quick Start Guide
DM16/DM12
16/12 Input Analogue Live and Studio Mixer with MIDAS
Microphone Preamplifiers
Quick Start Guide
2
DM16/DM12
Important Safety
Instructions
Terminals marked with this symbol carry
electrical current of sufficient magnitude
to constitute risk of electric shock.
Use only high-quality professional speaker cables with
¼" TS or twist-locking plugs pre-installed. All other
installation or modification should be performed only
by qualified personnel.
This symbol, wherever it appears,
alerts you to the presence of uninsulated
dangerous voltage inside the
enclosure - voltage that may be sufficient to constitute a
risk of shock.
This symbol, wherever it appears,
alerts you to important operating and
maintenance instructions in the
accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not
remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
qualified personnel.
Caution
To reduce the risk of fire or electric shock,
do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Caution
These service instructions are for use
by qualified service personnel only.
To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by qualified
service personnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Quick Start Guide
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by
the manufacturer.
12. Use only with the
cart, stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
been dropped.
15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable.
17. Correct disposal of this
product: This symbol indicates that
this product must not be disposed
of with household waste,
according to the WEEE Directive
(2012/19/EU) and your national
law. This product should be taken
to a collection center licensed for the recycling of waste
electrical and electronic equipment (EEE). The
mishandling of this type of waste could have a possible
negative impact on the environment and human health
due to potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation
in the correct disposal of this product will contribute to
the efficient use of natural resources. For more
information about where you can take your waste
equipment for recycling, please contact your local city
office, or your household waste collection service.
18. Do not install in a confined space, such as a book
case or similar unit.
19. Do not place naked flame sources, such as lighted
candles, on the apparatus.
20. Please keep the environmental aspects of battery
disposal in mind. Batteries must be disposed-of at a
battery collection point.
21. Use this apparatus in tropical and/or
moderate climates.
Instrucciones de
seguridad
LEGAL DISCLAIMER
MUSIC Group accepts no liability for any loss which
may be suffered by any person who relies either
wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications,
appearances and other information are subject to
change without notice. All trademarks are the property
of their respective owners. MIDAS, KLARK TEKNIK,
LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA
and DDA are trademarks or registered trademarks
of MUSIC Group IP Ltd. © MUSIC Group IP Ltd.
2016 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions
and additional information regarding MUSIC Group’s
Limited Warranty, please see complete details online at
music-group.com/warranty.
Las terminales marcadas con este símbolo
transportan corriente eléctrica de
magnitud suficiente como para constituir
un riesgo de descarga eléctrica. Utilice solo cables de
altavoz profesionales y de alta calidad con conectores
TS de 6,3 mm o de bayoneta prefijados. Cualquier otra
instalación o modificación debe ser realizada únicamente
por un técnico cualificado.
Este símbolo, siempre que aparece,
le advierte de la presencia de voltaje
peligroso sin aislar dentro de la caja;
este voltaje puede ser suficiente para constituir un riesgo
de descarga.
Este símbolo, siempre que aparece,
le advierte sobre instrucciones operativas
y de mantenimiento que aparecen en la
documentación adjunta. Por favor, lea el manual.
Atención
Para reducir el riesgo de descarga
eléctrica, no quite la tapa (o la parte
posterior). No hay piezas en el interior del equipo que
puedan ser reparadas por el usuario. Si es necesario,
póngase en contacto con personal cualificado.
Atención
Para reducir el riesgo de incendio o
descarga eléctrica, no exponga este
aparato a la lluvia, humedad o alguna otra fuente que
pueda salpicar o derramar algún líquido sobre el aparato.
No coloque ningún tipo de recipiente para líquidos sobre
el aparato.
Atención
Las instrucciones de servicio deben
llevarlas a cabo exclusivamente personal
cualificado. Para evitar el riesgo de una descarga eléctrica,
no realice reparaciones que no se encuentren descritas
en el manual de operaciones. Las reparaciones deben ser
realizadas exclusivamente por personal cualificado.
1. Lea las instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a todas las advertencias.
4. Siga todas las instrucciones.
5. No use este aparato cerca del agua.
6. Limpie este aparato con un paño seco.
7. No bloquee las aberturas de ventilación. Instale el
equipo de acuerdo con las instrucciones del fabricante.
8. No instale este equipo cerca de fuentes de calor
tales como radiadores, acumuladores de calor, estufas u
otros aparatos (incluyendo amplificadores) que puedan
producir calor.
9. No elimine o deshabilite nunca la conexión a tierra
del aparato o del cable de alimentación de corriente.
Un enchufe polarizado tiene dos polos, uno de los cuales
tiene un contacto más ancho que el otro. Una clavija con
puesta a tierra dispone de tres contactos: dos polos y la
puesta a tierra. El contacto ancho y el tercer contacto,
respectivamente, son los que garantizan una mayor
seguridad. Si el enchufe suministrado con el equipo no
concuerda con la toma de corriente, consulte con un
electricista para cambiar la toma de corriente obsoleta.
10. Coloque el cable de suministro de energía de manera
que no pueda ser pisado y que esté protegido de objetos
afilados. Asegúrese de que el cable de suministro de
energía esté protegido, especialmente en la zona de la
clavija y en el punto donde sale del aparato.
11. Use únicamente los dispositivos o accesorios
especificados por el fabricante.
12. Use únicamente la
carretilla, plataforma,
trípode, soporte o mesa
especificados por el
fabricante o suministrados
junto con el equipo.
Al transportar el equipo,
tenga cuidado para evitar
daños y caídas al tropezar con algún obstáculo.
13. Desenchufe el equipo durante tormentas o si no va a
utilizarlo durante un periodo largo.
14. Confíe las reparaciones únicamente a servicios
técnicos cualificados. La unidad requiere mantenimiento
siempre que haya sufrido algún daño, si el cable de
suministro de energía o el enchufe presentaran daños,
se hubiera derramado un líquido o hubieran caído objetos
dentro del equipo, si el aparato hubiera estado expuesto
a la humedad o la lluvia, si ha dejado de funcionar de
manera normal o si ha sufrido algún golpe o caída.
15. Al conectar la unidad a la toma de corriente eléctrica
asegúrese de que la conexión disponga de una unión
a tierra.
16. Si el enchufe o conector de red sirve como único
medio de desconexión, éste debe ser accesible fácilmente.
17. Cómo debe deshacerse de
este aparato: Este símbolo indica
que este aparato no debe ser
tratado como basura orgánica,
según lo indicado en la Directiva
WEEE (2012/19/EU) y a las
normativas aplicables en su país.
En lugar de ello deberá llevarlo al punto limpio más
cercano para el reciclaje de sus elementos eléctricos /
electrónicos (EEE). Al hacer esto estará ayudando a
prevenir las posibles consecuencias negativas para el
medio ambiente y la salud que podrían ser provocadas por
una gestión inadecuada de este tipo de aparatos. Además,
el reciclaje de materiales ayudará a conservar los recursos
naturales. Para más información acerca del reciclaje de
este aparato, póngase en contacto con el Ayuntamiento
de su ciudad o con el punto limpio local.
3
18. No instale esta unidad en un espacio muy reducido,
tal como encastrada en una librería o similar.
19. No coloque objetos con llama, como una vela
encendida, sobre este aparato.
20. Tenga presentes todas las advertencias relativas
al reciclaje y correcta eliminación de las pilas. Las pilas
deben ser siempre eliminadas en un punto limpio y nunca
con el resto de la basura orgánica.
21. Use este aparato en rangos de temperatura
moderados y/o tropicales.
NEGACIÓN LEGAL
MUSIC Group no admite ningún tipo de responsabilidad
por cualquier daño o pérdida que pudiera sufrir
cualquier persona por confiar total o parcialmente en la
descripciones, fotografías o afirmaciones contenidas en
este documento. Las especificaciones técnicas, imágenes
y otras informaciones contenidas en este documento
están sujetas a modificaciones sin previo aviso. Todas las
marcas comerciales que aparecen aquí son propiedad
de sus respectivos dueños. MIDAS, KLARK TEKNIK,
LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA
y DDA son marcas comerciales o marcas registradas
de MUSIC Group IP Ltd. © MUSIC Group IP Ltd.
2016 Reservados todos los derechos.
GARANTÍA LIMITADA
Si quiere conocer los detalles y condiciones aplicables
de la garantía así como información adicional sobre la
Garantía limitada de MUSIC Group, consulte online toda la
información en la web music-group.com/warranty.
4
DM16/DM12
Consignes de sécurité
Les points repérés par ce symbole portent
une tension électrique suffisante pour
constituer un risque d’électrocution.
Utilisez uniquement des câbles d’enceintes professionnels
de haute qualité avec fiches Jack mono 6,35 mm ou fiches
à verrouillages déjà installées. Toute autre installation ou
modification doit être effectuée uniquement par un
personnel qualifié.
Ce symbole avertit de la présence d’une
tension dangereuse et non isolée à
l’intérieur de l’appareil - elle peut
provoquer des chocs électriques.
Attention
Ce symbol signale les consignes
d’utilisation et d’entre ! Tien importantes
dans la documentation fournie. Lisez les consignes de
sécurité du manuel d’utilisation de l’appareil.
Attention
Pour éviter tout risque de choc électrique,
ne pas ouvrir le capot de l’appareil ni
démonter le panneau arrière. L’intérieur de l’appareil
ne possède aucun élément réparable par l’utilisateur.
Laisser toute réparation à un professionnel qualifié.
Attention
Pour réduire les risques de feu et de choc
électrique, n’exposez pas cet appareil à la
pluie, à la moisissure, aux gouttes ou aux éclaboussures.
Ne posez pas de récipient contenant un liquide sur
l’appareil (un vase par exemple).
Attention
Ces consignes de sécurité et d’entretien
sont destinées à un personnel qualifié.
Pour éviter tout risque de choc électrique, n’effectuez
aucune réparation sur l’appareil qui ne soit décrite par le
manuel d’utilisation. Les éventuelles réparations doivent
être effectuées uniquement par un technicien spécialisé.
1. Lisez ces consignes.
2. Conservez ces consignes.
3. Respectez tous les avertissements.
4. Respectez toutes les consignes d’utilisation.
5. N’utilisez jamais l’appareil à proximité d’un liquide.
6. Nettoyez l’appareil avec un chiffon sec.
7. Veillez à ne pas empêcher la bonne ventilation de
l’appareil via ses ouïes de ventilation. Respectez les
consignes du fabricant concernant l’installation
de l’appareil.
8. Ne placez pas l’appareil à proximité d’une source
de chaleur telle qu’un chauffage, une cuisinière ou tout
appareil dégageant de la chaleur (y compris un ampli
de puissance).
Quick Start Guide
9. Ne supprimez jamais la sécurité des prises bipolaires
ou des prises terre. Les prises bipolaires possèdent deux
contacts de largeur différente. Le plus large est le contact
de sécurité. Les prises terre possèdent deux contacts plus
une mise à la terre servant de sécurité. Si la prise du bloc
d’alimentation ou du cordon d’ali-mentation fourni ne
correspond pas à celles de votre installation électrique,
faites appel à un électricien pour effectuer le changement
de prise.
10. Installez le cordon d’alimentation de telle façon
que personne ne puisse marcher dessus et qu’il soit
protégé d’arêtes coupantes. Assurez-vous que le cordon
d’alimentation est suffisamment protégé, notamment au
niveau de sa prise électrique et de l’endroit où il est relié à
l’appareil; cela est également valable pour une éventuelle
rallonge électrique.
11. Utilisez exclusivement des accessoires et des
appareils supplémentaires recommandés par le fabricant.
12. Utilisez
exclusivement des
chariots, des diables,
des présentoirs, des pieds
et des surfaces de
travail recommandés
par le fabricant ou
livrés avec le produit.
Déplacez précautionneusement tout chariot ou diable
chargé pour éviter d’éventuelles blessures en cas de chute.
13. Débranchez l’appareil de la tension secteur en cas
d’orage ou si l’appareil reste inutilisé pendant une longue
période de temps.
14. Les travaux d’entretien de l’appareil doivent
être effectués uniquement par du personnel qualifié.
Aucun entretien n’est nécessaire sauf si l’appareil est
endommagé de quelque façon que ce soit (dommages sur
le cordon d’alimentation ou la prise par exemple), si un
liquide ou un objet a pénétré à l’intérieur du châssis,
si l’appareil a été exposé à la pluie ou à l’humidité, s’il ne
fonctionne pas correctement ou à la suite d’une chute.
15. L’appareil doit être connecté à une prise secteur
dotée d’une protection par mise à la terre.
16. La prise électrique ou la prise IEC de tout appareil
dénué de bouton marche/arrêt doit rester accessible
en permanence.
17. Mise au rebut appropriée de
ce produit: Ce symbole indique
qu’en accord avec la directive DEEE
(2012/19/EU) et les lois en vigueur
dans votre pays, ce produit ne doit
pas être jeté avec les déchets
ménagers. Ce produit doit être
déposé dans un point de collecte agréé pour le recyclage
des déchets d’équipements électriques et électroniques
(EEE). Une mauvaise manipulation de ce type de déchets
pourrait avoir un impact négatif sur l’environnement et la
santé à cause des substances potentiellement
dangereuses généralement associées à ces équipements.
En même temps, votre coopération dans la mise au rebut
de ce produit contribuera à l’utilisation efficace des
ressources naturelles. Pour plus d’informations sur
l’endroit où vous pouvez déposer vos déchets
d’équipements pour le recyclage, veuillez contacter votre
mairie ou votre centre local de collecte des déchets.
18. N’installez pas l’appareil dans un espace confiné tel
qu’une bibliothèque ou meuble similaire.
19. Ne placez jamais d’objets enflammés, tels que des
bougies allumées, sur l’appareil.
20. Gardez à l’esprit l’impact environnemental lorsque
vous mettez des piles au rebus. Les piles usées doivent
être déposées dans un point de collecte adapté.
21. Utilisez l’appareil dans un climat tropical
et/ou modéré.
DÉNI LÉGAL
MUSIC Group ne peut être tenu pour responsable pour
toute perte pouvant être subie par toute personne
se fiant en partie ou en totalité à toute description,
photographie ou affirmation contenue dans ce
document. Les caractéristiques, l’apparence et d’autres
informations peuvent faire l’objet de modifications
sans notification. Toutes les marques appartiennent à
leurs propriétaires respectifs. MIDAS, KLARK TEKNIK,
LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA
et DDA sont des marques ou marques déposées
de MUSIC Group IP Ltd. © MUSIC Group IP Ltd.
2016 Tous droits réservés.
GARANTIE LIMITÉE
Pour connaître les termes et conditions de garantie
applicables, ainsi que les informations supplémentaires
et détaillées sur la Garantie Limitée de MUSIC Group,
consultez le site Internet music-group.com/warranty.
Wichtige
Sicherheitshinweise
Vorsicht
Die mit dem Symbol markierten
Anschlüsse führen so viel Spannung,
dass die Gefahr eines Stromschlags besteht.
Verwenden Sie nur hochwertige, professionelle
Lautsprecherkabel mit vorinstallierten 6,35 mm
MONO-Klinkensteckern oder Lautsprecherstecker
mit Drehverriegelung. Alle anderen Installationen
oder Modifikationen sollten nur von qualifiziertem
Fachpersonal ausgeführt werden.
Achtung
Um eine Gefährdung durch Stromschlag
auszuschließen, darf die Geräteabdeckung
bzw. Geräterückwand nicht abgenommen werden.
Im Innern des Geräts befinden sich keine vom Benutzer
reparierbaren Teile. Reparaturarbeiten dürfen nur von
qualifiziertem Personal ausgeführt werden.
Achtung
Um eine Gefährdung durch Feuer bzw.
Stromschlag auszuschließen, darf dieses
Gerät weder Regen oder Feuchtigkeit ausgesetzt werden
noch sollten Spritzwasser oder tropfende Flüssigkeiten
in das Gerät gelangen können. Stellen Sie keine mit
Flüssigkeit gefüllten Gegenstände, wie z. B. Vasen,
auf das Gerät.
Achtung
Die Service-Hinweise sind nur durch
qualifiziertes Personal zu befolgen.
Um eine Gefährdung durch Stromschlag zu vermeiden,
führen Sie bitte keinerlei Reparaturen an dem Gerät
durch, die nicht in der Bedienungsanleitung beschrieben
sind. Reparaturen sind nur von qualifiziertem
Fachpersonal durchzuführen.
1. Lesen Sie diese Hinweise.
2. Bewahren Sie diese Hinweise auf.
3. Beachten Sie alle Warnhinweise.
4. Befolgen Sie alle Bedienungshinweise.
5. Betreiben Sie das Gerät nicht in der Nähe von Wasser.
6. Reinigen Sie das Gerät mit einem trockenen Tuch.
7. Blockieren Sie nicht die Belüftungsschlitze. Beachten
Sie beim Einbau des Gerätes die Herstellerhinweise.
8. Stellen Sie das Gerät nicht in der Nähe von
Wärmequellen auf. Solche Wärmequellen sind z. B.
Heizkörper, Herde oder andere Wärme erzeugende Geräte
(auch Verstärker).
9. Entfernen Sie in keinem Fall die
Sicherheitsvorrichtung von Zweipol- oder geerdeten
Steckern. Ein Zweipolstecker hat zwei unterschiedlich
breite Steckkontakte. Ein geerdeter Stecker hat zwei
Steckkontakte und einen dritten Erdungskontakt.
Der breitere Steckkontakt oder der zusätzliche
Erdungskontakt dient Ihrer Sicherheit. Falls das
mitgelieferte Steckerformat nicht zu Ihrer Steckdose
passt, wenden Sie sich bitte an einen Elektriker, damit die
Steckdose entsprechend ausgetauscht wird.
10. Verlegen Sie das Netzkabel so, dass es vor
Tritten und scharfen Kanten geschützt ist und nicht
beschädigt werden kann. Achten Sie bitte insbesondere
im Bereich der Stecker, Verlängerungskabel und an
der Stelle, an der das Netzkabel das Gerät verlässt,
auf ausreichenden Schutz.
11. Das Gerät muss jederzeit mit intaktem Schutzleiter
an das Stromnetz angeschlossen sein.
12. Sollte der Hauptnetzstecker oder eine
Gerätesteckdose die Funktionseinheit zum Abschalten
sein, muss diese immer zugänglich sein.
13. Verwenden Sie nur Zusatzgeräte/Zubehörteile,
die laut Hersteller geeignet sind.
14. Verwenden
Sie nur Wagen,
Standvorrichtungen,
Stative, Halter oder Tische,
die vom Hersteller benannt
oder im Lieferumfang
des Geräts enthalten
sind. Falls Sie einen
Wagen benutzen, seien Sie vorsichtig beim Bewegen
der Wagen-Gerätkombination, um Verletzungen durch
Stolpern zu vermeiden.
15. Ziehen Sie den Netzstecker bei Gewitter oder wenn
Sie das Gerät längere Zeit nicht benutzen.
16. Lassen Sie alle Wartungsarbeiten nur von
qualifiziertem Service-Personal ausführen. Eine Wartung
ist notwendig, wenn das Gerät in irgendeiner Weise
beschädigt wurde (z. B. Beschädigung des Netzkabels oder
Steckers), Gegenstände oder Flüssigkeit in das Geräteinnere
gelangt sind, das Gerät Regen oder Feuchtigkeit ausgesetzt
wurde, das Gerät nicht ordnungsgemäß funktioniert oder
auf den Boden gefallen ist.
17. Korrekte Entsorgung dieses
Produkts: Dieses Symbol weist
darauf hin, das Produkt
entsprechend der WEEE Direktive
(2012/19/EU) und der jeweiligen
nationalen Gesetze nicht
zusammen mit Ihren
Haushaltsabfällen zu entsorgen. Dieses Produkt sollte bei
einer autorisierten Sammelstelle für Recycling elektrischer
und elektronischer Geräte (EEE) abgegeben werden.
Wegen bedenklicher Substanzen, die generell mit
elektrischen und elektronischen Geräten in Verbindung
stehen, könnte eine unsachgemäße Behandlung dieser
Abfallart eine negative Auswirkung auf Umwelt und
Gesundheit haben. Gleichzeitig gewährleistet Ihr Beitrag
zur richtigen Entsorgung dieses Produkts die effektive
Nutzung natürlicher Ressourcen. Für weitere
Informationen zur Entsorgung Ihrer Geräte bei einer
Recycling-Stelle nehmen Sie bitte Kontakt zum
zuständigen städtischen Büro, Entsorgungsamt oder zu
Ihrem Haushaltsabfallentsorger auf.
5
18. Installieren Sie das Gerät nicht in einer beengten
Umgebung, zum Beispiel Bücherregal oder ähnliches.
19. Stellen Sie keine Gegenstände mit offenen
Flammen, etwa brennende Kerzen, auf das Gerät.
20. Beachten Sie bei der Entsorgung von Batterien
den Umweltschutz-Aspekt. Batterien müssen bei einer
Batterie-Sammelstelle entsorgt werden.
21. Verwenden Sie das Gerät in tropischen und/oder
gemäßigten Klimazonen.
HAFTUNGSAUSSCHLUSS
MUSIC Group übernimmt keine Haftung für Verluste,
die Personen entstanden sind, die sich ganz oder
teilweise auf hier enthaltene Beschreibungen,
Fotos oder Aussagen verlassen haben. Technische Daten,
Erscheinungsbild und andere Informationen können
ohne vorherige Ankündigung geändert werden.
Alle Warenzeichen sind Eigentum der jeweiligen
Inhaber. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE,
TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON,
BEHRINGER, BUGERA und DDA sind Warenzeichen oder
eingetragene Warenzeichen der MUSIC Group IP Ltd.
© MUSIC Group IP Ltd. 2016 Alle Rechte vorbehalten.
BESCHRÄNKTE GARANTIE
Die geltenden Garantiebedingungen und zusätzliche
Informationen bezüglich der von MUSIC Group
gewährten beschränkten Garantie finden Sie online unter
music-group.com/warranty.
6
DM16/DM12
Instruções de Segurança
Importantes
Aviso!
Terminais marcados com o símbolo
carregam corrente elétrica de magnitude
suficiente para constituir um risco de choque elétrico.
Use apenas cabos de alto-falantes de alta qualidade
com plugues TS de ¼" ou plugues com trava de torção
pré-instalados. Todas as outras instalações e modificações
devem ser efetuadas por pessoas qualificadas.
Este símbolo, onde quer que o encontre,
alerta-o para a leitura das instruções de
manuseamento que acompanham o
equipamento. Por favor leia o manual de instruções.
Atenção
De forma a diminuir o risco de choque
eléctrico, não remover a cobertura
(ou a secção de trás). Não existem peças substituíveis por
parte do utilizador no seu interior. Para esse efeito recorrer
a um técnico qualificado.
Atenção
Para reduzir o risco de incêndios ou
choques eléctricos o aparelho não deve ser
exposto à chuva nem à humidade. Além disso, não deve
ser sujeito a salpicos, nem devem ser colocados em cima
do aparelho objectos contendo líquidos, tais como jarras.
Atenção
Estas instruções de operação devem ser
utilizadas, em exclusivo, por técnicos de
assistência qualificados. Para evitar choques eléctricos
não proceda a reparações ou intervenções, que não as
indicadas nas instruções de operação, salvo se possuir as
qualifi-cações necessárias. Para evitar choques eléctricos
não proceda a reparações ou intervenções, que não as
indicadas nas instruções de operação. Só o deverá fazer se
possuir as qualificações necessárias.
1. Leia estas instruções.
2. Guarde estas instruções.
3. Preste atenção a todos os avisos.
4. Siga todas as instruções.
5. Não utilize este dispositivo perto de água.
6. Limpe apenas com um pano seco.
7. Não obstrua as entradas de ventilação. Instale de
acordo com as instruções do fabricante.
8. Não instale perto de quaisquer fontes de calor
tais como radiadores, bocas de ar quente, fogões de
sala ou outros aparelhos (incluindo amplificadores)
que produzam calor.
9. Não anule o objectivo de segurança das fichas
polarizadas ou do tipo de ligação à terra. Uma ficha
polarizada dispõe de duas palhetas sendo uma mais larga
do que a outra. Uma ficha do tipo ligação à terra dispõe
Quick Start Guide
de duas palhetas e um terceiro dente de ligação à terra.
A palheta larga ou o terceiro dente são fornecidos para
sua segurança. Se a ficha fornecida não encaixar na sua
tomada, consulte um electricista para a substituição da
tomada obsoleta.
10. Proteja o cabo de alimentação de pisadelas ou
apertos, especialmente nas fichas, extensões, e no local
de saída da unidade. Certifique-se de que o cabo eléctrico
está protegido. Verifique particularmente nas fichas, nos
receptáculos e no ponto em que o cabo sai do aparelho.
11. O aparelho tem de estar sempre conectado à rede
eléctrica com o condutor de protecção intacto.
12. Se utilizar uma ficha de rede principal ou uma
tomada de aparelhos para desligar a unidade de
funcionamento, esta deve estar sempre acessível.
13. Utilize apenas ligações/acessórios especificados
pelo fabricante.
14. Utilize apenas com
o carrinho, estrutura,
tripé, suporte, ou mesa
especificados pelo
fabricante ou vendidos
com o dispositivo.
Quando utilizar um
carrinho, tenha cuidado ao
mover o conjunto carrinho/dispositivo para evitar danos
provocados pela terpidação.
15. Desligue este dispositivo durante as trovoadas
ou quando não for utilizado durante longos períodos
de tempo.
16. Qualquer tipo de reparação deve ser sempre
efectuado por pessoal qualificado. É necessária uma
reparação sempre que a unidade tiver sido de alguma
forma danificada, como por exemplo: no caso do cabo
de alimentação ou ficha se encontrarem danificados;
na eventualidade de líquido ter sido derramado ou
objectos terem caído para dentro do dispositivo; no caso
da unidade ter estado exposta à chuva ou à humidade;
se esta não funcionar normalmente, ou se tiver caído.
17. Correcta eliminação deste
produto: este símbolo indica que
o produto não deve ser eliminado
juntamente com os resíduos
domésticos, segundo a Directiva
REEE (2012/19/EU) e a legislação
nacional. Este produto deverá
ser levado para um centro de recolha licenciado para a
reciclagem de resíduos de equipamentos eléctricos e
electrónicos (EEE). O tratamento incorrecto deste tipo
de resíduos pode ter um eventual impacto negativo
no ambiente e na saúde humana devido a substâncias
potencialmente perigosas que estão geralmente
associadas aos EEE. Ao mesmo tempo, a sua colaboração
para a eliminação correcta deste produto irá contribuir
para a utilização eficiente dos recursos naturais. Para mais
informação acerca dos locais onde poderá deixar o seu
equipamento usado para reciclagem, é favor contactar
os serviços municipais locais, a entidade de gestão de
resíduos ou os serviços de recolha de resíduos domésticos.
18. Não instale em lugares confinados, tais como
estantes ou unidades similares.
19. Não coloque fontes de chama, tais como velas
acesas, sobre o aparelho.
20. Favor, obedecer os aspectos ambientais de descarte
de bateria. Baterias devem ser descartadas em um ponto
de coletas de baterias.
21. Use este aparelho em climas tropicais
e/ou moderados.
LEGAL RENUNCIANTE
O MUSIC Group não se responsabiliza por perda alguma
que possa ser sofrida por qualquer pessoa que dependa,
seja de maneira completa ou parcial, de qualquer
descrição, fotografia, ou declaração aqui contidas.
Dados técnicos, aparências e outras informações
estão sujeitas a modificações sem aviso prévio.
Todas as marcas são propriedade de seus respectivos
donos. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE,
TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON,
BEHRINGER, BUGERA e DDA são marcas ou marcas
registradas do MUSIC Group IP Ltd. © MUSIC Group
IP Ltd. 2016 Todos direitos reservados.
GARANTIA LIMITADA
Para obter os termos de garantia aplicáveis e condições e
informações adicionais a respeito da garantia limitada do
MUSIC Group, favor verificar detalhes na íntegra através
do website music-group.com/warranty.
7
8
DM16/DM12
Quick Start Guide
1. Introduction
Welcome!
Thank you for purchasing the DM16/DM12 analogue mixing console.
The DM12 and DM16 are classic analogue consoles with plenty of routing options,
musical EQ and the smooth, professional sound pioneered by MIDAS.
These consoles offer plenty of versatility for both studio and live applications,
and with proper care and maintenance, you can expect your MIDAS console to
perform faithfully for many years to come.
Features
• Live performance and studio recording analogue mixer with
16/12 input channels
• 12/8 mono input channels with award-winning MIDAS
microphone preamplifiers
• 2 electronically balanced stereo line input channels on ¼" TRS connectors
• 3 band EQ on mono channels with swept mid band
• 2 aux sends with pre/post fade switching
• 60 mm precision long-life faders
• Rugged chassis construction for durability in portable applications
• Auto-ranging universal switch-mode power supply
• 3-Year Warranty Program
• Designed and engineered in England
About this manual
This is the operation manual for the DM16 and DM12 analogue mixing consoles.
This manual is intended to help get your unit installed and in operation as quickly
as possible by giving you unpacking, installation, connection, setting up and
operating instructions. To help familiarise you with the DM16 and DM12, there is
a description of the controls, along with easy-to-follow user instructions.
DM16
2. Getting Started
This section shows you how to unpack, install, connect up, switch on and
configure the DM16/DM12 analogue mixing console.
This equipment is supplied by a mains voltage that can
cause electric shock injury.
Before installing, setting up or operating this equipment, make sure
that you have read and fully understand all of this section and the
“Important safety instructions” at the front of this manual. Refer to
additional safety information on the top cover of the unit.
Unpacking
Carefully unpack your DM16/DM12 analogue mixing console. Then, inspect the
console carefully for any signs of damage that may have occurred during transit
and notify the courier immediately if you discover any.
Check the contents of your DM16/DM12 equipment package. If there are any
parts missing, incorrect or faulty, please contact your local distributor or MIDAS.
Please retain the original packing in case you should need to return the
equipment to the manufacturer or supplier, or transport or ship the unit later.
DM12
9
Installation
The position of the console will vary from venue to venue. When installing the
console, take the following into consideration:
• Before installing and operating this Class 1 equipment, make sure it is
correctly connected to the protective earth conductor of the mains voltage
supply socket outlet through the mains lead.
• When positioning the console for FOH (Front Of House) use it is worth
placing the console in a position where the sound system used can be heard
properly from the mix position. Try to avoid placing the console behind
pillars or large objects, or mixing from a level above the speaker position (for
example, from a balcony).
• The console should be located in a convenient space commensurate with the
use to which the console is being put.
• Ideally a cool area is preferred, away from power distribution equipment or
other potential sources of interference.
• Do not install the equipment in places of poor ventilation.
• Do not install this equipment in a location subjected to excessive heat,
dust or mechanical vibration. Allow for adequate ventilation around
the equipment, making sure that its fans and vents are not obstructed.
Whenever possible, keep the equipment out of direct sunlight.
• Do not place the equipment in an unstable condition where it might
accidentally fall over.
• Provision should be made for some flat surface surrounding the console to
prevent people using the console as a table top.
Power
The internal power supply is of the switch mode type that automatically senses
the incoming mains voltage and will work where the nominal voltage is in the
range 100 VAC to 240 VAC.
The correct leads for connection in the area to which the unit was shipped are
supplied with the unit. The equipment should only be plugged into the mains
outlets using the supplied leads.
Make sure the plug fitted on the supplied mains cable is securely fitted to the
mains IEC connector on the unit. When fitting or removing a plug, always hold
the plug itself and never use the cable, as this may damage the cable. Never
insert or remove an electric plug with wet hands.
Handling the equipment
When lifting or moving the equipment, always take its size and weight into
consideration. If necessary, use suitable lifting equipment or transporting gear,
or sufficient additional personnel.
Completely isolate the equipment electrically and disconnect all cables from the
equipment before moving it.
Do not insert your fingers or hands in any gaps or openings on the equipment, for
example, vents.
Electric fields
In accordance with Part 15 of the FCC Rules & Regulations, “… changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.”
Should this product be used in an electromagnetic field that is amplitude
modulated by an audio frequency signal (20 Hz to 20 kHz), the signal to noise
ratio may be degraded. Degradation of up to 60 dB at a frequency corresponding
to the modulation signal may be experienced under extreme conditions (3 V/m,
90% modulation).
10
DM16/DM12
Quick Start Guide
3. Top Panel
(17)
(1)
(18)
(16)
(19)
(2)
(3)
(20)
(15)
(21)
(4)
(22)
(5)
(6)
(23)
(24)
(7)
(25)
(26)
(8)
(27)
(9)
(10)
(11)
(14)
(28)
(29)
(12)
(30)
(1) MIC input connects microphones and other balanced signals using
XLR connectors.
(2) LINE input uses a ¼" TRS plug to connect either balanced or line-level
unbalanced signals.
(3) INSERT jack uses a ¼" TRS plug to bring external effects processing
(typically compression) into the channel’s signal path. This jack requires
specialised insert cables that split into two plugs (either ¼" TS or XLR) to
access the external unit’s in and out connections.
(4) GAIN knob adjusts the sensitivity of the MIC and/or LINE inputs.
(5) TREBLE knob adjusts the high frequencies.
(6) MID and FREQ knobs adjust midrange frequencies. Adjust the FREQ knob to
select the specific frequency adjusted by the MID knob.
(7) BASS knob adjusts the low frequencies.
(8) AUX 1 and AUX 2 knobs controls the amount of signal sent from each
channel to the AUX OUT jacks for monitoring or external effects processing.
Use the AUX MASTERS buttons to control whether the AUX channels send a
pre-fader signal (PRE) or a post-fader signal (POST).
(9) PAN knobs control the left-right stereo placement for each channel.
(10) PFL (Pre Fader Listen) button, when pressed, solos the channel and
sends the input signal to the MASTER METERS section for more precise
gain-setting. In PFL mode, the soloed signal routes to the MONITOR OUT
and PHONES outputs, and the PFL LED in the MASTER METERS section will
light up.
(11) PEAK LED lights when the channel signal overloads.
(12) MUTE button mutes the channel.
(13) CHANNEL FADERS control the final level for each channel within the
overall mix.
(14) BAL knob controls the relative left-right balance for stereo signals coming in
through the STEREO 1 and STEREO 2 inputs.
(15) STEREO 1 and STEREO 2 inputs can be used to route left-right stereo
signals into the mix, such as stereo returns from external effects processors.
For mono signals, use the L (MONO) input of each pair of stereo inputs.
(16) AUX OUT jacks can be used to route AUX mixes out to external effects
processors or to stage monitors. For send-and-return effects processing, use
the STEREO 1 and STEREO 2 inputs to route the effected “wet” signals back
into the overall mix.
(17) MONITOR OUT jacks use ¼" TRS plugs to route a copy of the final mix out
to local or studio monitors. Control the MONITOR OUT level by using the
LOCAL knob in the LOCAL MONITOR section. In PFL (Pre Fader Listen) mode,
the soloed PFL signal will override and replace the main mix signal in the
MONITOR OUT output.
(18) MASTER LEFT and MASTER RIGHT jacks use XLR connectors to send the final
stereo mix out to monitors or the main house mix (live sound).
(19) MAIN OUT INSERT jacks use a ¼" TRS plugs to apply external effects
processing to the final mix before the signal goes out through the MASTER
outputs (e.g., to compress the entire final mix). This jack requires specialised
insert cables that split into two plugs (either ¼" TS or XLR) to access the
external processor’s in and out jacks.
(20) 2 TRACK uses RCA jacks to route an additional line-level stereo signal into
the main mix (MIX button) and/or the MONITOR OUT mix (MONITOR button).
Control the level of the 2 TRACK signal by using the volume control on your
stereo sound source.
(21) RECORD OUT uses RCA jacks to send a line-level copy of the final mix signal
out to external recording devices.
(22) PHONES jack connects headphones using a ¼" TRS plug. Control the output
level by using the PHONES knob in the LOCAL MONITOR section. The PHONES
source signal comes from the main mix, except in PFL mode, when the
soloed PFL signal will override and replace the main mix signal.
(23) +48 V LED lights up to indicate that phantom power has been activated.
(24) PHANTOM POWER button turns phantom power on and off.
(25) LOCAL knob controls the output level for the MONITOR OUT jacks.
(26) PHONES knob controls the output level for the PHONES jack.
(27) AUX MASTERS buttons control the pre-fader (PRE) and post-fader (POST)
settings for the AUX 1 and AUX 2 knobs.
(28) MASTER METERS display levels for the main mix, as well as soloed channels
with the PFL (Pre-Fader Listen) function activated for detailed gain-setting.
The POW LED lights to indicate that the unit has been powered up. The PFL
LED lights up to indicate that the meter is being used for PFL gain setting.
(29) 2 TRACK MONITOR button routes the stereo 2 TRACK signal into the
MONITOR OUT mix.
(30) 2 TRACK MIX button routes the stereo 2 TRACK signal into the main mix.
(31) MIX faders adjust the overall output of the mixer at the MASTER LEFT and
MASTER RIGHT jacks.
4. Rear Panel
(31)
(13)
(32)
(33)
(32) AC IN accepts the included power cable for connection to a mains outlet.
(33) POWER ON switch turns the mixer on and off.
(34) SERIAL NUMBER for Warranty registration.
11
(34)
12
DM16/DM12
Quick Start Guide
5. Connectors
To ensure the correct and reliable operation of the equipment, only high quality
balanced, screened, twisted pair audio cable should be used. XLR connector
shells should be of metal construction so that they provide a screen when
connected to the console/snake and, where appropriate, they should have Pin 1
connected to the cable screen.
1. Line output audio connector. Female XLR plug and male XLR chassis
connector with the following pinouts: 1 = ground; 2 = hot; and 3 = cold.
2. Mic/line input audio connector. Male XLR plug and female XLR chassis
connector with the following pinouts: 1 = ground; 2 = hot; and 3 = cold.
3. RCA connectors (2 track/record out). Male RCA plug and female RCA
chassis connector with the following pinouts: 1 = ground; 2 = signal.
4. ¼" TRS jack plug (inserts). Male ¼" TRS plug and female TRS chassis
connector with the following pinouts: 1 (tip) = send; 2 (ring) = return;
3 (sleeve) = ground.
5. ¼" TRS jack plug (input, output, phones). Male ¼" TRS plug and
female TRS chassis connector with the following pinouts: 1 (tip) = hot;
2 (ring) = cold; 3 (sleeve) = ground.
6. Operation
Basic Operation
1. Make sure the power to all devices is turned off!
2. Connect all appropriate power and audio cables to the mixer.
3. Set the controls with all knobs centered and all faders down/off.
4. Turn the mixer on.
1 3 2
2 3 1
5. Set the GAIN for each channel. (See the Gain Setting section for details.)
6. With the MAIN MIX faders and LOCAL MONITOR knobs all the way down, turn
on your PA system or monitors.
7. Slowly raise the MAIN MIX faders or LOCAL MONITOR knob to the
desired level.
8. Adjust the relative level of each channel by raising each CHANNEL FADER.
1 2
3
3
21
21
9. Adjust the left-right position of a channel in the stereo field if necessary by
turning the channel’s PAN or BAL knob.
10. For live applications, adjust the overall output from the mixer to the power
amp or powered speakers by raising the MIX faders. If the red +10 or +16
LEDs on the MASTER METERS light, lower the MIX faders.
11. Use the AUX 1 and AUX 2 knobs to send the channel signals out to an effects
processor or stage monitor connected to the AUX OUT jacks. If used for
effects, route the signal back from the processor to the STEREO 1 or STEREO
2 inputs.
13
Gain Setting
1. Press the Channel 1 PFL (Pre-Fader Listen) button to solo the channel for
gain setting using the MASTER METERS. The PFL LED in the MASTER METERS
section will light up.
2. Sing, speak or play at a normal level through the microphone or instrument
connected to Channel 1.
3. While singing or playing, turn Channel 1’s GAIN control. The MASTER METERS
will display the signal level. Set the GAIN control so that the loudest peaks
reach 0 on the MASTER METERS.
4. Press the Channel 1 PFL button again to deactivate Pre-Fade Listen mode for
that channel.
5. Repeat Steps 1-4 for any other channels that will be used.
14
DM16/DM12
Quick Start Guide
7. Technical Specifications
DM16
DM12
Mono Inputs
Mic inputs (MIDAS mic preamp)
Type
Mic EIN @ 60 dB gain, 50 Ω source at insert send
Mic EIN @ 60 dB gain, 150 Ω source at insert send
Noise @ 10dB Gain, at insert send
Frequency response (-1 dB) at main output
Frequency response (-3 dB) at main output
Mic Gain range
Max. input level
CMRR @ +60dB gain
Impedance
Distortion (THD+N) at 0 dBu
Phantom power
8
12
XLR, balanced
-131 dBu, unweighted, 20 Hz to 20 kHz
-128 dBu, unweighted, 20 Hz to 20 kHz
-97 dBu, unweighted, 20 Hz to 20 kHz
20 Hz to 20 kHz (-1 dB)
70 kHz (-3 dB)
+10 dB to +60 dB
+11 dBu @ +10 dB gain
Typically -90 dB
2 kΩ, balanced
0.005% @ 1kHz
Switchable, +48 V
Line Input
Type
Impedance
Line Gain range
Max. input level
¼" TRS, balanced
20 kΩ balanced / unbalanced
-10 dB to +40 dB
+30 dBu
Stereo Inputs
Type
Impedance
Gain range
Max. input level
4 x ¼" TRS connector, balanced
20 kΩ balanced / unbalanced
-20 dB to +20 dB
+21 dBu
Equaliser
Low
Mid (mono inputs only)
High
±15 dB @ 80 Hz, shelving
±15 dB @ 150 Hz to 3.5 kHz, variable semi-parametric
±15 dB @ 12 kHz, shelving
Channel Inserts
Type
Max. input / output level
¼" TRS connector, unbalanced
+21 dBu
Aux Sends
Type
Impedance
Max. output level
2 x ¼" TRS connector, balanced
240 Ω balanced, 120 Ω unbalanced
+21 dBu
Monitor Out
Type
Impedance
Max. output level
2 x ¼" TRS connector, balanced
240 Ω balanced, 120 Ω unbalanced
+21 dBu
Main Out
Type
Impedance
Max. output level
2 x XLR, electronically balanced
100 Ω balanced, 50 Ω unbalanced
+21 dBu
Main Out Inserts
Type
Max. input / output level
DM16
DM12
Phones Output
2 x ¼" TRS connector, unbalanced
+21 dBu
Type
Impedance
Max. output level
¼" TRS connector, unbalanced
25 Ω
+21 dBu
2-Track Input
Type
Impedance
Max. input level
2 x RCA, unbalanced
20 kΩ
+21 dBu
Record Out
Type
Impedance
Max. output level
2 x RCA, unbalanced
1 kΩ
+21 dBu
Main Mix System Noise
Main mix @ -∞, channel fader @ -∞
Main mix @ 0 dB, channel fader @ -∞
Main mix @ 0 dB, channel fader @ 0 dB
-104 dBu, unweighted, 20 Hz to 20 kHz
-91 dBu, unweighted, 20 Hz to 20 kHz
-84 dBu, unweighted, 20 Hz to 20 kHz
Power Supply / Voltage (Fuses)
Switch mode power supply
Power consumption
Mains connection
100-240 V~ 50/60 Hz, switchable (T 1.6 A H 250 V)
40 W
Standard IEC receptacle
Dimensions / Weight
Dimensions (H x W x D)
Weight
95 x 438 x 370 mm (3.7 x 17.2 x 14.6")
5 kg (11 lbs)
95 x 328 x 370 mm (3.7 x 12.9 x 14.6")
3.9 kg (8.6 lbs)
15
16
DM16/DM12
Other important information
Quick Start Guide
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
Important information
1. Register online. Please register your new
MUSIC Group equipment right after you purchase it by
visiting midasconsoles.com. Registering your purchase
using our simple online form helps us to process your repair
claims more quickly and efficiently. Also, read the terms and
conditions of our warranty, if applicable.
2. Malfunction. Should your MUSIC Group
Authorized Reseller not be located in your vicinity, you
may contact the MUSIC Group Authorized Fulfiller for your
country listed under “Support” at midasconsoles.com.
Should your country not be listed, please check if your
problem can be dealt with by our “Online Support” which
may also be found under “Support” at midasconsoles.com.
Alternatively, please submit an online warranty claim at
midasconsoles.com BEFORE returning the product.
3. Power Connections. Before plugging the unit
into a power socket, please make sure you are using the
correct mains voltage for your particular model. Faulty fuses
must be replaced with fuses of the same type and rating
without exception.
DM16/DM12
Responsible Party Name:
MUSIC Group Research
UK Limited
Address:
Klark Industrial Park,
Walter Nash Road,
Kidderminster. Worcestershire.
DY11 7HJ. England.
Phone Number:
+44 1562 741515
DM16/DM12
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Group
can void the user’s authority to use the equipment.
17
midasconsoles.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement