MARK-10 Series STW Torque Wrench User's Guide
Add to my manuals4 Pages
MARK-10 Series STW Torque Wrench
The MARK-10 Series STW Torque Wrench is a versatile tool that can be used for a variety of applications. It is accurate to within ±0.6% FS + BGI and has a safe overload capacity of 150% of its capacity. The wrench has a retracted length of 10 inches and a maximum length of 20 inches. It comes with a 3/8-inch square drive and a 1/2-inch square drive.
The wrench is easy to use. Simply plug the 15-pin connector into the external sensor connector on the BGI force/torque indicator. The wrench is then ready to use.
The wrench can be used to measure instantaneous, average, and peak torque. It is ideal for use in applications where precise torque measurements are required.
advertisement
Series
STW
TORQUE WRENCHES
Reference Guide
Series STW
GENERAL
Carefully remove the sensor from its packaging and inspect for any damage.
The sensor is shipped ready to use. No assembly is required.
Series STW torque sensors work in conjunction with the BGI force/torque indicator for instantaneous, average, and peak torque measurements. Simply plug the 15-pin connector into the external sensor connector on the indicator.
Please note that all calibration data and menu selections programmed and saved during setup with the BGI are saved within the sensor. While this allows for interchangeability, each sensor must be programmed separately.
For the most accurate readings, be sure to apply torque gradually. Avoid repetitive shock and impact loading in order to extend the life of your unit.
DIMENSIONS in [mm]
A
10 [254]
RETRACTED LENGTH
C
2
Reference Guide
SPECIFICATIONS
Model
STW100
STW500
Capacity x Resolution
100 x 0.1 lbFin, 1150 x 1 kgFmm, 1150 x 1 Ncm
500 x 0.5 lbFin, 5000 x 5 kgFmm, 5000 x 5 Ncm
STW1000 1000 x 1 lbFin, 11500 x 10 kgFmm, 11000 x 10 Ncm
A
3/8"
SQUARE
1/2"
SQUARE
B C
0.5
[12.7]
0.7
[17.8]
11.0
[280.0]
14.0
[355.0]
20.0
[508.0]
Accuracy:
Temperature:
Operating conditions:
Humidity:
Safe overload % of capacity:
±0.6% FS + BGI
40ºF - 110ºF [5ºC - 45ºC]
96% max. (no condensation)
150
WARRANTY
Mark-10 Corporation expressly warrants to its buyer for three (3) years from the date of delivery that the goods sold are free from defects in workmanship and materials. Mark-10
Corporation will, at its option, repair or replace or refund the purchase price of goods found to be defective. This remedy shall be the buyer’s sole and exclusive remedy. Any modification, abuse, exposure to corrosive environment or use other than intended will void this warranty. This warranty is in lieu of all other warranties, including implied warranties of merchantability and fitness for an intended purpose. In no event shall Mark-10
Corporation be liable for any incidental and consequential damages in connection with goods sold or any part thereof.
3
OTHER MARK-10 PRODUCTS
A full line of force and torque measurement products and related items, including force gauges, torque gauges, force and torque test stands, sensors, grips, software, and more.
We make a measurable difference in force and torque measurement
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: 631-842-9200
Fax: 631-842-9201
Internet: www.mark-10.com
E-mail: [email protected]
32-1077
REV 2 0710
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project