MARK-10 Series SSM Force Sensor User's Guide

MARK-10 Series SSM Force Sensor User's Guide
Series SSM
INLINE TENSION/COMPRESSION
FORCE SENSORS
Reference Guide
Series SSM
GENERAL
Carefully remove the sensor from its packaging and inspect for any damage.
The sensor is shipped ready to use. No assembly is required.
Series SSM force sensors work in conjunction with the BGI force/torque
indicator for instantaneous, average, and peak torque measurements. Simply
plug the 9-pin connector into the external sensor connector on the indicator.
Please note that all calibration data and menu selections programmed and
saved during setup with the BGI are saved within the sensor. While this allows
for interchangeability, each sensor must be programmed separately.
In order to extend the life of your unit, avoid repetitive shock and impact
loading.
DIMENSIONS
in [mm]
2.5 [63.5]
2.06 [52.3]
Ø 0.44 [11.2]
1.83 [46.5]
0.16 [4.1]
0.31 [7.9]
#10-32 X2
0.396 [10.06]
10.0 [254] RETRACTED LENGTH
2
Reference Guide
SPECIFICATIONS
Model
Capacity x Resolution
SSM025
0.25 x 0.0001 lb, 100 x 0.05 gF, 1 x 0.0005 N
SSM05
0.5 x 0.0002 lb, 250 x 0.1 gF, 2.5 x 0.001 N
SSM2
2 x 0.001 lb, 1 x 0.0005 kgF, 10 x 0.005 N
SSM10
10 x 0.005 lb, 5 x 0.002 kgF, 50 x 0.02 N
SSM20
20 x 0.01 lb, 10 x 0.005 kgF, 100 x 0.05 N
SSM50
50 x 0.02 lb, 25 x 0.01 kgF, 250 x 0.1 N
SSM100
100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N
Accuracy:
Operating conditions:
Temperature:
Humidity:
Safe Overload
% of Capacity
200
150
±0.15% FS + BGI
40ºF - 110ºF [5ºC - 45ºC]
96% max. (no condensation)
WARRANTY
Mark-10 Corporation expressly warrants to its buyer for three (3) years from the date of
delivery that the goods sold are free from defects in workmanship and materials. Mark-10
Corporation will, at its option, repair or replace or refund the purchase price of goods
found to be defective. This remedy shall be the buyer’s sole and exclusive remedy. Any
modification, abuse, exposure to corrosive environment or use other than intended will
void this warranty. This warranty is in lieu of all other warranties, including implied warranties of merchantability and fitness for an intended purpose. In no event shall Mark-10
Corporation be liable for any incidental and consequential damages in connection with
goods sold or any part thereof.
3
OTHER MARK-10 PRODUCTS
A full line of force and torque measurement products and related items, including force gauges, torque gauges, force and torque test stands, sensors, grips,
software, and more.
We make a measurable difference in force and torque measurement
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: 631-842-9200
Fax: 631-842-9201
Internet: www.mark-10.com
E-mail: info@mark-10.com
32-1027
REV 3 0710
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement