Microscan Visionscape GigE Integrated Vision Solution Configuration Guide

Microscan Visionscape GigE Integrated Vision Solution Configuration Guide
Visionscape® GigE Camera
Configuration Guide
Hardware Required
Item
1
2
3
Description
Visionscape GigE Camera
Basic Visionscape GigE Camera License*
Part Number
98-000XXX-01
VGL0-0DD0
VGL0-1DD0
Basic Visionscape GigE Camera with IntelliFind® License*
Power Supply or
98-000138-01
4
Camera Power M8-3 to Pigtail 5M
98-000129-01
5
Camera Strobe/Trigger M8-4 to Flying Lead 5M
98-000126-01
CAT6 Ethernet with Jackscrews to RJ45 High Flex 2M or
98-000133-01
6
CAT6 Ethernet with Jackscrews to RJ45 High Flex 5M
98-000134-01
7
PCIe DIO Card 16 In 16 Out Isolated with Cable and Terminal
98-000130-01
PCIe DIO Card 16 In 16 Out Isolated with Cable and Terminal (PNP) Current Sourcing
98-000142-01
8
9
GigE 4 Port Switch – POE Injection
98-000124
10
GigE Power Injector – 2 Inputs and 2 Outputs
98-000125
11
GigE 5 Port Switch
98-000131
12
Single Port GigE Network PCIe Interface Card
98-000140
13
Dual Port GigE Network PCIe Interface Card
98-000132
14
C-Mount Lens
98-9280057X
*Important: Visionscape licenses are implemented by means of a USB hardware key. The key must be present in the host PC
before Visionscape software will recognize Omron Microscan GigE Cameras.
Power and Signal Connections
Visionscape GigE Camera (Back View)
RJ45 Ethernet
Connection
4
1
M8-3 Power
3
2
M8-4 Trigger and Strobe
1
LED 1 and 2
4
3
Typical System Configurations
Power Connector
Pin Signal Description
BROWN WIRE; 24 volts @ 350ma typical (~3.5W)
1
Vcc
8VDC @ 370ma thru 30VDC @ 120ma
3
Ground BLUE WIRE; Vcc Return
4
N/C
BLACK WIRE
Strobe/Trigger Connector
Pin Signal Description
1
TrigIN+ BROWN WIRE; External Trigger Input +
2
TrigIN– WHITE WIRE; External Trigger Input –
3
Strobe BLUE WIRE; Strobe Output
BLACK WIRE; User-supplied voltage for Flash output:
U(ext)
4
5-30VDC (24VDC @ 16ma recommended)
Single Camera Option – Single Port NIC
14
1
5
6
4
12
Host PC with
Single Port NIC
Dual Camera Option 1 – Dual Port NIC (Maximum Bandwidth)
14
14
1
5
6
4
1
5
6
4
13
Host PC with
Dual Port NIC
Dual Camera Option 2 – GigE Switch (Shared Bandwidth)
14
14
1
5
6
4
1
5
6
4
Copyright ©2018 Omron Microscan Systems, Inc.
Notes: For the highest throughput and optimal
use of GigE bandwidth, each camera should be
connected to its own NIC port (as shown in Dual
Camera Option 1). In applications where bandwidth
is not an issue, cameras can be connected to the
host PC via a GigE switch (as shown in Dual
Camera Option 2).
Refer to the Visionscape GigE Camera Guide for
information about wiring Visionscape PCIe Digital
I/O Boards.
Consult with the Omron Microscan Solutions Group
concerning applications that use more than 4
(up to 8) cameras, or concerning applications using
color cameras.
Omron Microscan GigE Cameras must be
connected to the host PC using a private network –
not one shared with other applications, such as a
factory floor or office data network. It is strongly
recommended that the host PC NIC be set to a
private static Class C IP address, such as
192.168.0.100/255.255.255.0.
Visionscape GigE Cameras must be connected to a
network interface card (NIC) (commonly referred to
as an Ethernet card). All components must be
capable of GigE operation (1000BASE-T). Ethernet
cables should be CAT5E or CAT6 (recommended).
11
GigE
Switch
CAT6
Cable
12
Host PC with
Single Port NIC
84-217013-02 Rev K
Visionscape GigE Camera Configuration
Visionscape GigE Camera Accessories
Accessory
Starter/Evaluation Kit
GigE Camera Starter/Evaluation Kit
Power Supply
Power Supply
Cables
Camera Strobe/Trigger
Camera Power
CAT6 Ethernet
CAT6 Ethernet
I/O Boards
PCIe DIO Card
PCIe DIO Card
GigE Port Adapters
4 Port Switch
Power Injector
5 Port Switch
Single Port Interface Card
Dual Port Interface Card
Lenses
C-Mount Lens
C-Mount Lens
C-Mount Lens
C-Mount Lens
C-Mount Lens
C-Mount Lens
C-Mount Lens
Mounting Option
Demo Stand
Licenses
Basic Visionscape GigE Camera License*
Basic Visionscape GigE Camera with
IntelliFind® License*
Documentation
Omron Microscan Tools Drive
Part Number
Description
98-000139-01
Visionscape GigE Camera Starter/Evaluation Kit
98-000138-01
GigE Camera Power Supply Kit, Universal AC
98-000126-01
98-000129-01
98-000133-01
98-000134-01
M8-4 to Pigtail 5M
M8-3 to Pigtail 5M
CAT6 Ethernet Cable with Jackscrews to RJ45 High Flex 2M
CAT6 Ethernet Cable with Jackscrews to RJ45 High Flex 5M
98-000130-01
16 In 16 Out Isolated with Cable and Terminal
16 In 16 Out Isolated with Cable and Terminal (PNP)
Current Sourcing
98-000142-01
98-000124
98-000125
98-000131
98-000140
98-000132
GigE 4 Port Switch – POE Injection
GigE Power Injector – 2 Inputs and 2 Outputs
GigE 5 Port Switch
Single Port GigE Network PCIe Interface Card
Dual Port GigE Network PCIe Interface Card
92-92800571
92-92800572
92-92800573
92-92800574
92-92800575
92-92800576
92-92800577
8.5 mm Lens
12 mm Lens
16 mm Lens
25 mm Lens
35 mm Lens
50 mm Lens
75 mm Lens
98-HEDSL
Visionscape GigE Camera Demo Stand
VGL0-0DD0
Visionscape GigE Camera License USB Hardware Key
VGL0-1DD0
Visionscape GigE Camera with IntelliFind® License USB
Hardware Key
37-000010-01
Software, Documentation, links to website
*Important: Visionscape licenses are implemented by means of a USB hardware key. The key must be present in the host PC
before Visionscape software will recognize Omron Microscan GigE Cameras.
Note: Additional accessories are available in the Omron Microscan Product Pricing Catalog.
Copyright ©2018 Omron Microscan Systems, Inc.
www.microscan.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement