Robe Robin ColorStLite User Manual

Robe Robin ColorStLite User Manual
Version 1.3
1
Robin ColorStrobe Lite
Table of contents
1. Safety instructions.......................................................................................................... 3
2. Fixture exterior view ...................................................................................................... 5
3. Installation....................................................................................................................... 6
3.1 Connection to the mains............................................................................................. 6
3.2 Installing the gel frame and barndoors........................................................................ 7
3.3 Rigging the fixture and floor installation of the fixture................................................. 8
3.4 DMX-512 connection................................................................................................. 13
3.5 Ethernet connection.................................................................................................. 14
4. Control menu map......................................................................................................... 16
5. DMX chart....................................................................................................................... 18
6. Strobe and Special effects running ............................................................................ 20
6.1 Strobe ....................................................................................................................... 20
6.2 Special effects .......................................................................................................... 20
7. Control menu ................................................................................................................ 22
7.1 Tab " Address"........................................................................................................... 23
7.2 Tab "Information"....................................................................................................... 24
7.3 Tab "Personality"....................................................................................................... 25
7.4 Tab "Manual Control"................................................................................................. 26
7.5 Tab "Stand-alone" ..................................................................................................... 26
7.6 Tab "Service"............................................................................................................. 27
8. RDM................................................................................................................................ 28
9. Wireless DMX operation............................................................................................... 28
10. Error and information messages............................................................................... 29
11. Technical Specifications............................................................................................. 30
12. Maintenance and cleaning.......................................................................................... 32
12.1 Replacing fuse........................................................................................................ 33
12.2 Disposing of the product......................................................................................... 33
13. Appendix...................................................................................................................... 33
13.1 Strobe and Special effects timing ........................................................................... 33
2
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE POWERING OR INSTALLING YOUR ROBIN ColorStrobe Lite !
Save it for future reference.
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes
written in this manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
The Robin ColorStrobe Lite was designed for indoor use and it is intended for
professional applications only. It is not for household use.
1. Safety instructions
DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT!
Make sure that the available voltage is not higher than stated on the rear panel of the fixture.
This fixture should be operated only from the type of power source indicated on the marking label. If you are
not sure of the type of power supplied, consult your authorized distributor or local power company.
WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to completely
remove power from unit when not in use or before cleaning or servicing the fixture.
The power plug has to be accessible after installing the fixture. Do not overload wall outlets and extension cords
as this can result in fire or electric shock.
Do not allow anything to rest on the power cord. Do not locate this fixture where the cord may be damaged by
persons walking on it.
Make sure that the power cord is never crimped or damaged by sharp edges. Check the fixture and the power
cord from time to time.
Refer servicing to qualified service personnel.
This fixture falls under protection class I. Therefore this fixture has to be connected to
a mains socket outlet with a protective earthing connection.
Do not connect this fixture to a dimmer pack.
Warning!
LED light emission. Risk of eye injury. Do not look into the beam at short distance of
the of the product. Do not view the light output with optical instruments or any device
that may conncentrate the beam
To guard against epileptic seizure:
Do not operate the fixture near stairways. Provide advance notice that
ColorStrobe lighting is in use. Avoid extended periods of continuous flashing, particularly at frequencies of 10 to 20 flashes per second
If the fixture has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
3
immediately. The arising condensation water might damage your device. Leave the device switched off until
it has reached room temperature.
Do not shake the fixture. Avoid brute force when installing or operating the fixture.
When choosing the installation spot, please make sure that the fixture is not exposed to extreme heat, moisture
or dust.
Air vents and slots in the fixture are provided for ventilation, to ensure reliable operation of the device and to
protect it from overheating.The openings should never be covered with cloth or other materials, and never
must be blocked.
This fixture should not be placed in a built-in installation unless proper ventilation is provided.
Never place filters or other materials over the front glass cover.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
To avoid damage of the internal optical system of the fixture, never let the sunlight
lights directly to the lens array, even when the fixture is not working !
Keep flammable materials well away from the fixture.
Do not illuminate surfaces within 1 meter of the fixture.
Provide a minimum clearance of 0.3 meters around air vents
Always use a secondary safety cable when rigging this fixture.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.
The fixture becomes very hot during operation. Allow the fixture to cool approximately 20 minutes prior to manipulate with it.
Operate the fixture only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the fixture. Most damages are the result of unprofessional operation!
Please use the original packaging if the fixture is to be transported.
Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
4
2. Fixture exterior view
1 - Glass cover and lens array
2 - U-holder
3 - Tilt lock
4 - Antenna
5 - DMX IN
6 - DMX OUT
7 - Control buttons
8 - QVGA touch screen
9 - Fuse holder
10 - RJ 45 Input
11 - Power
The ENTER/DISPLAY ON button also serves for switching the display on when the fixture is disconnected
from mains.
5
3. Installation
Fixtures must be installed by a Qualified electrician in accordance with all
national and local electrical and construction codes and regulations.
3.1 Connection to the mains
For protection from electric shock, the fixture must be earthed!
The Robin ColorStrobe Lite is equipped with auto-switching power supply that automatically adjusts to any 5060Hz AC power source from 100-240 Volts.
Connect the fixture to the mains by means of the enclosed power cord
If you need to install other plug on the power cord, note that the cores in the power cord are coloured according
to the following table. The earth has to be connected!
If you have any doubts about proper installation, consult a qualified electrician.
Core (EU)
Core (US)
Connection
Plug Terminal Marking
Brown
Black
Live
L
Light blue
White
Neutral
N
Yellow/Green
Green
Earth
Do not overload the supply line and the connecting leads.
Wiring and connection work must be carried out by a qualified staff!
6
3.2 Installing the gel frame and barndoors
Disconnect the fixture from mains before the accessory installation.
Never operate the fixture with barndoors closed.
1. Put the frame adaptor (1) on the fixture and
secure it with four screws (2).
2. Insert the gel frame (4) into slots (3) of
the frame adaptor (1). Use the slots closer to
the glass cover of the fixture.
3. Insert the barndoors (5) into second slots (3) of
the frame adaptor (1).
4. Secure inserted barndoors and (or) the gel
frame by means of the two locks (6).
Lift up a little the lock (6) to release it from
the projection (7) and move it to the position
as shown on the picture B until the projection (8)
snaps into lock (6).
Do not operate the fixture with unsecured gel
frame or barndoors!
7
3.3 Rigging the fixture and floor installation of the fixture
A structure intended for installation of the fixture (s) must safely hold weight of the fixture(s) placed on it. The
structure has to be certificated to the purpose.
The fixture (fixtures) must be installed in accordance with national and local electrical and construction codes
and regulation..
For overhead installation, the fixture must be always secured with a safety wire
that can bear at least 10 times the weight of the fixture.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another time.
The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled
person once a year.
Allow the fixture to cool for ten minutes before handling.
The fixture should be installed outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working
load limits, installation material being used, and periodic safety inspection of all installation material and the
projector. If you lack these qualifications, do not attempt the installation yourself, but use a help of professional
companies.
CAUTION: Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety
of a possible installation, do not install the fixture!
The fixture has to be installed out of the reach of public.
The fixture must never be fixed swinging freely in the room.
. When installing the device, make sure there is no highly inflammable
material (decoration articles, etc.) in a distance of min. 0.5 m.
CAUTION!
Use an appropriate clamp to rig the fixture on the truss.
Follow the instructions mentioned at the bottom of the fixture base.
Make sure that the device is fixed properly! Ensure that the
structure (truss) to which you are attaching the fixture is secure.
The fixture can be rigged to the truss via the Omega holder and one clamp (two holes with 140mm spacing
serves for the Omega holder) or stand directly on the floor.
8
Floor installation via the floor stand
1. Fasten the floor stand (1) to the U-holder (2) of the fixture by means of two 1/4 turn locks (3).
2. The tilt lock (7) allows to adjust the fixture to desired position.
Rigging the fixture via the omega holder
1. Bolt the clamp (1) to the omega holder (2) with M12 bolt and lock nut through the hole in the holder.
2. Fasten the omega holder to the U-holder (4) of the fixture by inserting both quick-lock fasteners (3) into
holes in the U-holder and tighten fully clockwise.
3. Clamp the fixture on a truss (12) and tighten the rigging clamp (1).
4. For securing the fixture to the truss, install a safety wire that can hold at least 10 times the weight
of the fixture. Use only a safety wire with a snap hook with screw lock gate. Pull the safety
wire (11) through the U-holder (4) and around the truss (12) as shown on the picture below.
5. The tilt lock (7) allows to adjust the fixture to desired position. In case, that the tilt lock cannot
be loosened (tightened) due to the housing of the fixture, pull this tilt lock in a direction from the fixture,
turn it to desired position, release it and continue in loosening (tightening) this tilt lock (principle of
a "ratcheting socket wrench").
9
3.4 DMX-512 connection
The fixture is equipped with 5-pin XLR sockets for DMX input and output.The sockets are wired in parallel.
Only use a shielded twisted-pair cable designed for RS-485 and 5-pin XLR-plugs and connectors in order to
connect the controller with the fixture or one fixture with another.
DMX - output DMX-input
1 - Shield
2 - Signal (-)
3 - Signal (+)
4 - Used for wireless DMX
5 - Used for wireless DMX
1 - Shield
2 - Signal (-)
3 - Signal (+)
4 - Used for wireless DMX
5 - Used for wireless DMX
If you are using the standard DMX controllers, you can connect the DMX output of the controller directly with
the DMX input of the first fixture in the DMX-chain. If you wish to connect DMX controllers with other
XLR-outputs, you need to use adapter cables.
Building a serial DMX-chain:
Connect the DMX output of the first fixture in the DMX-chain with the DMX input of the next fixture. Always connect
one output with the input of the next fixture until all fixtures are connected. Up to 32 fixtures can be connected.
Caution: At the last fixture, the DMX cable should be terminated with a terminator. Solder a 120 Ω resistor
between Signal (–) and Signal (+) into a 5-pin XLR-plug and plug it in the DMX output of the last fixture.
10
3.5 Ethernet connection
The fixtures on a data link are connected to the Ethernet with ArtNet communication protocol.The control software running on your PC (or light console) has to support Art-Net protocol.
Art-Net communication protocol is a 10 Base T Ethernet protocol based on the TCP/IP.Its purpose is to allow
transfer of large amounts of DMX 512 data over a wide area using standard network technology.
IP address is the Internet protocol address.The IP uniquely identifies any node (fixture) on a network.
The Universe is a single DMX 512 frame of 512 channels.
The fixture is equipped with 8-pin RJ- 45 socket for Ethernet input.Use a network cable category 5 (with four
“twisted” wire pairs) and standard RJ-45 plugs in order to connect the fixture to the network.
RJ-45 socket (front view):
RJ-45 plug (front view):
1- TD+ 5- Not connected
2- TD-6- RX
3- RX+
7- Not connected
4- Not connected
8- Not connected
Patch cables that connect fixtures to the hubs or LAN sockets are wired 1:1,that is,pins with the same numbers
are connected together:
1-1
2-2
3-3
4-4
5-5
6-6
7-7
8-8
If only the fixture and the computer are to be interconnected,no hubs or other active components are needed.A
cross-cable has to be used:
1-3
2-6
3-1
4-8
5-7
6-2
7-5
8-4
If the fixture is connected with active Ethernet socket (e.g. switch) the network icon
will appear at the
bottom right corner of the screen:
Direct Ethernet operation
Connect the Ethernet inputs of all fixtures with the Ethernet network.
Option “ Artnet (gMaI or gMA2)" has to be selected from “Ethernet Mode” menu on the fixture.
Set IP address (002.xxx.xxx.xxx / 010.xxx.xxx.xxx) and the Universe.
(DMX address=186)
IP addres=002.168.002.004
Universe=1
(DMX address=38)
IP addres=002.168.002.003
Universe=1
(DMX address=1)
IP addres=002.168.002.002
Universe=1
An advised PC setting: IP address: 002.xxx.xxx.xxx / 010.xxx.xxx.xxx (Different from fixture IP addresses)
NET mask: 255.0.0.0
11
Ethernet / DMX operation
Option “ Artnet" (gMaI or gMA2 or sACN) has to be selected from “Ethernet Mode” menu at first fixture.
Option “Ethernet To DMX” has to be selected from the “Ethernet Mode” menu at the first fixture (connected to
the Ethernet) in the fixture chain, next fixtures have standard DMX setting.
Connect the Ethernet-input of the first fixture in the data chain with the network. Connect the DMX output of
this fixture with the input of the next fixture until all fixtures are connected to the DMX chain.
Caution: At the last fixture, the DMX chain has to be terminated with a terminator. Solder a 120 Ω resistor
between Signal (–) and Signal (+) into a XLR-plug and connect it in the DMX-output of the last fixture.
DMX address=41
DMX address=9
DMX address=41
DMX address=9
12
DMX address=1
IP address=002.168.002.002
Universe=0
DMX address=1
IP address=002.168.002.003
Universe=1
4. Control menu map
Default settings=Bold print
Tab
Level 1
Level 2
Level 3
Addressing
Settings
DMX Address
001-512
DMX Presets
Mode 1
Level 4
Level 5
:
Mode 5
Ethernet Settings
Ethernet Mode
Disable
ArtNet
gMAI
gMA2
sACN
Ethernet To DMX
On
Off
IP Address/NetMask
Default IP Address
Custom IP Address
Net Mask
ArtNet Universe
0-255
MANet settings
MANet I/IIUniverse
1-256
MANet Session ID
1-32
sACN Settings
sACN Universe
sACN Priority
Information
Fixture Times
Power On Time
Fixture Temperatures
LEDs Temperature
Total Hours
Resetable Hours
Current
Maximum NonRes.
Maximum Res.
Board temperature
Current
Maximum NonRes.
Maximum Res.
Base Temperature
Current
Maximum NonRes.
Maximum Res.
DMX Values
Red Foreground
:
Zone Effects Speed
Wireless State
Signal Quality
Unlink Wireless Adapter
Power Channel
State
Software Versions
Display System
Module L1
Module L2
Module L3
Module L4
Product IDs
Mac Address
RDM UID
RDM Label
View Logs
Fixture Errors
Fixture Status
Power On
Power Off
Fixture Position
Fixture Temperatures
LEDs Temperature
Board Temperature
Base Temperature
13
Level 6
Tab
Level 1
Level 2
Personality
DMX Presets
Mode 1
Level 3
Level 4
:
Mode 5
View Selected Preset
DMX Input
Wired Input
Wireless Input
Wireless In/XLR Out
DMX Hold
Off,On
Microphone Sensitivity
1-10-20
Colour Calibration
Mode
On, Off
Colour mixing Mode
RGBW,CMY
White Counting
On, Off
Dimmer Curve
Linear
Square Law
Foreground/Background
F.And B..
F+B
F overwrites B.
Init Effect Positions
Red Foreground
0-255
:
Screen Settings
Zone Effects Speed
0-255
Display Intensity
1-10
Screen Saver Delay
Off-10min.
Touchscreen Lock
Off-10min.
Recalibrate Touchscreen
Display Orientation
Normal
Inverted
Auto
Temperature Unit
°C,°F
Fan Mode
Auto
High
Date & Time Settings
Default Settings
Date & Time Settings
Default Settings
Manual Control
Manual Effect Control
Red Foreground
0-255
:
Zone Effects Speed
Stand -Alone
0-255
Test Sequences
MusicTrigger
Off, On
Preset Playback
None
Test
:
Prog. 3
Play Program
Play Program 1
Play Program 2
Play Program 3
Edit Program
Edit Program 1
Start Step
1-88
End Step
1-88
14
Level 5
Level 6
Tab
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Edit Program Steps
Step 1
Red Foreground
0-255
:
:
:
Step Time
0-25.5s
:
Fade Time
0-25,5s
Step 88
Int. All Zones
0-255
:
Service
Adjust DMX values
Red Foreground
:
Zone Effects speed
Calibrations
Calibrate Colours
Red
0-255
Green
0-255
Blue
0-255
White
0-255
Load Default Calibrations
Update Software
15
Step Time
0-25.5s
Fade Time
0-25,5s
6. Strobe and Special effects running
6.1 Strobe
Mode 3 and 4
Mode 1 and 2
6.2 Special effects
Rumping
Rump Up
Rump Down
16
Rump Up/Down
Lightning
Mode 1, 2, 4
Spikes
For Duration and Rate timing serves the same values as for strobe
17
7. Control menu
The Robin ColorStrobe Lite is equipped with the QVGA Robe touch screen with battery backup which
allows to set the fixture´s behaviour according to your needs, obtain information on its operation, test its
various parts and lastly program it, if it has to be used in a stand-alone mode.
The fixture´s menu can be controlled either by the control buttons or directly by touching the icon.
Control buttons on the front panel:
[ESCAPE] button used to leave the menu without saving changes.
[NEXT] , [PREV] buttons for moving between menu items and symbols, adjusting values.
[ENTER/Display On] button used to enter the selected menu (menu item) and to confirm adjusted value.
If the fixture is disconnected from mains, the button switches the touch screen on.
Icons used in the touch screen menu
- [back arrow] used to move back to the previous screen (menu).
- [up arrow] used to move up on the previous page.
- [down arrow] used to move down on the next page.
- [confirm] used to save adjusted values, to leave menu or to perform desired action.
- [cancel] used to leave menu item without saving changes.
- [confirm+copy] used to save adjusted values and copy them to the next prog. step.
- [warning icon] used to indicate some error which has occurred in the fixture.
- [Ethernet] used to indicate Ethernet connected.
- [display turn] used to turn the display by 180°.
- [slider control] used to recall slider system for setting desired value.
- [keyboard control] used to recall keyboard system for setting desired value.
The green icon at the top right corner of the screen indicates the level
of the display battery charging. If the whole icon is green, the battery is
fully charged while the red icon indicates exhausted battery. The battery
charges during fixture operation, its charging lasts cca 6 hours.
We recommend that the fixture should be in operation at least 7 hours
per week to keep the battery fully charged.
If you switch the fixture on and this screen will not appear till 1 minute,
switch the fixture off and on again. If the screen lights, the battery is
exhausted. In case the screen still does not light, the battery is faulty.
18
The menu page displays icons for each function that you can perform from the touch screen.
After switching the fixture on, the touch screen shows the screen with the ROBE logo:
Touch any part of the screen or press the [ENTER/Display On] button to display the initial screen with the current stored DMX address:
Touch the green arrow at the bottom right corner of the screen or press the [ENTER/Display On] button to enter
the " Address" menu.
An item (such as a Tab, menu item, text box, icon) may be selected from a screen by simply touching the item
in the list or by pressing the [NEXT] or [PREV] buttons to scroll through list items. With each press, the next
item is highlighted. Press [ENTER/Display On] to select the highlighted item.
Before first fixture operation, set current date and time in the menu "Date &Time
Setings" (menu path: Personality--> Date &Time Setings).
7.1 Tab " Address"
Settings - Select the menu to set desired fixture address setting.
DMX Address - Select the menu to set the DMX start address.
DMX Preset - Use the menu to select desired DMX mode.
Mode 1 - 9 control channels (default)
Mode 2 - 14 control channels
Mode 3 - 18 control channels
Mode 4 - 28 control channels
Mode 5 - 84 control channels
View Selected Preset - Use the menu to display channels included in the selected mode.
Ethernet Settings - The menu allows all needed settings for the Ethernet operation
Ethernet Mode
Disable - The option disables Ethernet operation.
Artnet - Fixture receives Artnet protocol
gMAI - Fixture receives MANet I protocol
gMA2 - Fixture receives MANet 2 protocol
sACN - Fixture receives sACN protocol
Ethernet To DMX - Fixture receives protocol from the Ethernet input and sends DMX
data to its DMX output (fixture works as an "Ethernet/DMX converter", next fixture can be connected
to its DMX output and you can build a standard DMX chain by connecting another fixtures.
Only one fixture has to be connected to the Ethernet.
IP Address/Net Mask - Select this menu to set IP address. IP address is the Internet protocol
address.The IP uniquely identifies any node (fixture) on a network.
There cannot be 2 fixtures with the same IP address on the network!
Default IP Address -Preset IP address, you can set up only first byte of IP address
(2 or 10) e.g. 002.019.052.086.
19
Custom IP Address - The option enables to set up all bytes of IP address.
Net Mask - The option enables to set up all bytes of Net Mask.
ArtNet Universe - Use this item to set a Universe (0-255). The Universe is a single DMX
512 frame of 512 channels.
MANet Settings - Use this menu to set parameters for MANet operation.
MANet Universe I/II - The value of this item can be set in range 1-256.
MANet Session ID - The value of this item can be set in range 1-32.
sACN Settings - Use this menu to set parameters for sACN operation.
sACN Universe - The value of this item can be set in range 1-32000.
sACN Priority - The value of this item can be set in range 0-255.
7.2 Tab "Information"
Fixture Times - The menu provides readouts of fixture operation hours.
Power On Time Hours - Select this menu to read the number of fixture operation hours.
Total Hours - The item shows the total number of the operation hours since the Robin ColorStrobe Lite has been fabricated.
Resetable Hours - The item shows the number of the operation hours that the Robin ColorStrobe Lite has been powered on since the counter was last reset.
In order to reset this counter to 0, touch the text box next to the item "Resetable Hours:"
Fixture Temperatures - The menu is used to view temperatures of the fixture´s inside.
LEDs Temperature - The menu shows temperatures in the LED module.
Current - A current temperature of the LED module.
Maximum NonRes. - A maximum temperature of the LED module since the fixture has
been fabricated.
Maximum Res. - A maximum temperature of the LED module since the counter
was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
Leds Board Temperature - The menu shows temperatures on the LED control PCB.
Current - A current temperature of the LED control PCB.
Maximum NonRes. - A maximum temperature of the LED control PCB since the fixture has
been fabricated.
Maximum Res. - A maximum temperature of the LED control PCB since the counter
was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
Base Temperature - The menu shows temperature at the touch screen control module.
Current - A current temperature at the touch screen control module.
Maximum NonRes. - A maximum temperature at the touch screen control module
base since the fixture has been fabricated.
Maximum Res. - A maximum temperature at the touch screen control module since
the counter was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
DMX Values - The menu is used to read DMX values of each channel received by the fixture.
Wireless State - The menu serves for reading of the wireless operation status (only for Wireless DMX version
of the fixture).
Unlink Wireless Adapter - The item serves for unlinking the fixture from the transmitter.
Power Channel State - The menu item shows state of the Special functions channel switches.
Product IDs - The menu is used to read the MAC Address ,RDM UID and RDM Label.
Software Version - Select this item to read the software version of the fixture modules:
Display System - a display processor.
Module L - a LED module processor.
20
View Logs - Use this menu to read fixture´s data which have been recorded during fixture operation. This
colected data allows easier troubleshooting.
Fixture Errors - Use this menu to read fixture errors which have occured during fixture operation.
Fixture Status - Recorded following actions: Power On, Power Off.
Fixture Position - Recorded installation positions of the fixture:
Fixture Temperatures - Recorded temperatures which have exceeded defined levels.
7.3 Tab "Personality"
User mode - The Robin ColorStrobe Lite allows you to recall up to 3 user settings. After switching the fixture on
for the first time, the User A settings is active. Now all changes made in the “Personality” menu , ”Addressing”
menu and the “Music Trigger“ and “ Preset Playback“ items from the “Stand-alone” menu are saved to the
User A settings. If you now select the User B settings, from this moment the changes made in these menus will
be saved to the User B settings. After switching the fixture off and on, the User B setting is active. In this way
you may use the 3 fixture operating behaviours.
User A Settings - the function recalls the user A settings.
User B Settings - the function recalls the user B settings.
User C Settings - the function recalls the user C settings.
DMX Preset - Use the menu to select desired DMX mode.
Mode 1 - 9 control channels (default)
Mode 2 - 14 control channels
Mode 3 - 18 control channels
Mode 4 - 28 control channels
Mode 5 - 84 control channels
View Selected Preset - Use the menu to display channels included in the selected mode.
DMX Input- Use the menu to select mode of receiving DMX signal.
Wired Input - DMX signal is received by means of the standard DMX cable.
Wireless - DMX signal is received by means of the inbuilt wireless module.
Wireless In/XLR Out- the fixture receives wireless DMX and sends the signal to its wired DMX output.
The fixture behaves as " Wireless/Wired" adapter.
DMX Hold - If the function is on, the last received DMX values are held in case, that DMX data receiving was
interrupted (e.g. disconnected DMX controller).
Microphone Sensitivity - Enter the menu if you want to adjust the microphone sensitivity from 1 (max.) to 20
(min.).
Colour Calibration Mode - If the function is on, the white output from the fixture (and also mixed colours)
is more uniform. Each colour is corrected according to the values set in the menu "Calibrations" (Service->
Calibrations-> Calibrate Colours).
Colour Mixing Mode - This item allows switching into RGBW or CMY mode. In the CMY mode, the white(8bit)/
white (16) bit channels are not active.
White Counting - If this function is On, the white LEDs light when a white colour is mixed. The light intensity of
the white LEDs is in a proportion to the intensity of the rest of LEDs (red, Green, blue) and improves the white
output of the fixture. If you want lit with white LEDs only, this function has to be set off.
21
Dimmer Curve - Use this menu item to select linear or square law dimmer curve.
Foreground/Background - The function allows to set desired relation between colours of foreground and
background.
Init Effect Positions - Use the menu to set all effects to the desired positions at which they will stay after
switching the fixture on without DMX signal connected.
Screen Settings - Use this menu to change the touch screen settings.
Display Intensity - The item allows to control the intensity of the screen (1-min., 10-max.).
Screen saver Delay - The item allows you to keep the screen on or to turn it off automatically after 1-10
minutes after last touch (or pressing any button on the control panel).
Touchscreen Lock - The item allows you to lock the screen after last touch (or pressing any button on the
control panel). The time delay can be set in range of 1-10 minutes.To unlock the screen, press the
[ENTER/Display On] button.
Recalibrate Touchscreen - The item starts calibration of the touchscreen. Follow the instructions on
the screen.
Display Orientation - The menu allows to change display orientation.
Normal - Standard display orientation if the fixture is placed horizontally (e.g. on the ground).
Inverted - Inverted orientation (needed if the fixture is hanging on the truss).
Auto - The option activates a gravitation sensor for automatic screen orientation.
Note: Auto option is set as default. You change the display orientation by touching the icon
on the display,
an the option set in the "Display Orientation" menu is temporarily overriden.
Temperature unit - Use the menu item to change temperature unit from °C to °F.
Fan Mode - Use the menu to set the fixture fans to max. fan power mode ("High") or to auto- control mode
("Auto").
Date & Time Settings - Use this menu to set current date and time for the fixture log system (menu "View
Logs"). Set this menu item before first fixture operation.
Default Settings - The menu item allows to set all fixture parameters to the default (factory) values. 7.4 Tab "Manual Control"
Manual Effect control - Use the menu to control all fixture channels by means of the control panel.
7.5 Tab "Stand-alone"
Test Sequences -Use the menu item to run a test/demo sequences without an external controller, which will
show you some possibilities of using Robin ColorStrobe Lite.
Music Trigger - Use the item to activate the sound control of the running program via the built-in microphone.
Preset Playback - This menu allows you to select the program which will be played in a loop after switching
the fixture on (the option is commonly used in a stand-alone operation without an external controller).
None - The option disables “Presetting playback” function.
Test - The option starts the test sequences.
Prog. 1 - The option starts user program No. 1.
Prog. 2 - The option starts user program No. 2.
Prog. 3 - The option starts user program No. 3.
Play program - Use the menu to run desired program in a loop.
Play Program 1 - The option starts user program No.1.
22
Play Program 2 - The option starts user program No. 2.
Play Program 3 - The option starts user program No. 3.
Edit Program - Use the menu to create or to edit desired program. The Robin ColorStrobe Lite offers 3 free
programs, each up to 88 steps.
Edit Program 1 - The option allows to edit user program No.1.
Edit Program 2 - The option allows to edit user program No.2.
Edit Program 3 - The option allows to edit user program No.3
To edit program:
1. Touch the item which you want to edit (“Edit Program 1” - “Edit Program 3”).
2. Touch the item "Edit Program Steps".
3. Touch the item "Step 1".
4 From the list of effects touch desired effect and set its value. Browse throw the list by touching the [up arrow]
and [down arrow] and set all desired effects.
An item "Step Time" (value of 0-25.5 sec.) is the time during which effects last in the current step
5. Save adjusted effects to the current step by touching the [confirm] or save and copy them to the following
step by touching the [confirm+copy]. By touching the text box "Preview" next to the current program step you
can view created scene.
6. Repeat the steps 4 and 5 for next program steps.
7. After editing desired program steps, adjust the length of the program by touching the text boxes "Start Step"
and "End Step".
Meaning of the icons used in the "Edit Program" menu:
- moves down on the next page
- saves adjusted values and leaves menu
- moves up on the previous page
- saves values to the current step and copy them to the
following prog. step
- leaves menu without saving values
7.6 Tab "Service"
Adjust DMX Values - The menu allows you to set all effects to desired positions before colour calibration of
the fixture.
Calibrations
Calibrate Colours - The menu serves for adjusting of LED saturations to achieve colour temperature of
5600K for white output.
Red - a red LEDs saturation adjustment
Green - a green LEDs saturation adjusment
Blue - a blue LEDs saturation adjustment
White - a white LEDs saturation adjustment
Calibration of the white 5600K via the control board
1. Disconnect DMX controller from the fixture. Set the menu item "Colour Calibration Mode" to On
(tab Personality-> Colour Calibration Mode-> On) and go to the "Adjust DMX Values" menu
(tab Service-> Adjust DMX Values).
2. Set "Intensity foreground", "Duration" and "Rate" at 255 DMX and "Virtual colour wheel" at 10 DMX (white
5600K).
3. Point the centre of the light beam on the lux meter (e.g. Minolta CL-200A Chroma meter) which is placed
at min. distance of 2.5m from the fixture
4. Enter the menu "Calibrate Colours".
5. By means of the Red, green, Blue and White items adjust the 5600K colour temperature as exactly as
possible (∆u´v´= 0).
7. After adjusting 5600K colour temperature, touch the [confirm] to save all adjusted values.
23
Note: you can also use DMX controler for this calibration, calibration protocol is the following:
Effect
Red - red saturation
Green- green saturation
Blue - blue saturation
White - white saturation
Mode 1
channel 10
channel 11
channel 12
channel 13
Load Default Calibrations - The item loads default (factory) calibration values.
Updating software - The menu item allows you to update software in the fixture.
The following items are required in order to update software:
- PC running Windows or Linux or macOS
- DSU file
- Flash cable RS232/DMX, P/N13050624 (if you want to use a serial port of PC)
- Robe Universal Interface or Robe Universal interface WTX (if you want to use an USB port of PC)
After the software updating the fixture will be set to default values.
To update software in the fixture:
1. DSU file is available from Robe web site at WWW.robe.cz.
File with extension zip is intended for Windows (used and tested from XP to W10 on 32/64bit systems).
File with extension tbz is intended for Linux (used and tested on Debian and Ubuntu 32/64bit).
File with extension dmg is intended for macOS (used and tested on OSX up to Sierra) XQuartz required,
install it from https://www.xquartz.org/
Save the download file to a folder on your computer.
In case that you use windows, extract files in the zip file (e.g. DSU_RobinColorStrobe_19030136.zip)
2. Disconnect the fixture from DMX controller.
3. If you use the flash cable RS232/DMX, connect a serial port of your computer with DMX input of the fixture
by means of the cable.
If you use the Robe Universal Interface, connect a USB port of your computer with the Robe Universal Interface
by means of the USB cable and DMX input of the fixture with the DMX output of the Robe Universal Interface
via a DMX cable.
4. Switch the fixture to the update mode (tab "Service" --> Update Software).
Note: If you do not want to continue in the software update, you have to switch off and on the fixture
to escape from the updating mode.
We recommend to cancel all running programs on your computer before starting the software update.
5. Double-click the software uploader file (e.g. DSU_RobinColorStrobe_19030136.exe) in
the extracted files. The Software Uploader program will start running.
6. Select correct "COM " number if you use a Flash cable RS232/DMX or select "Robe Universal Interface "
if you use the Robe Universal Interface/Robe Universal Interface WTX and then click on the "Connect" button.
7. If the connection is OK, click the “Start Uploading" button to start software uploading. It will take several
minutes to perform software update.
If the option "Incremental Update" is not checked, all processors will be updated (including processors with
the same software version).
If you wish to update only processors with new version of software, check the “Incremental Update box“.
Avoid interrupting the process. Update status is being displayed in the "Info Box" window.
When the update is finished, the line with the text “Fixture is successfully updated“ will appear in
this window.
In case upload process is interrupted (e.g. power loss), the fixture stays in “Updating mode” and you will have
to repeat the software update again.
Another way, how to update software in the fixtures (especially large installation of fixtures) is to use the ROBE
Uploader. It is a software for automatized software update of Robe fixtures. It takes advantage of RDM
support).
For more information please see https://www.robe.cz/robe-uploader/.
8. RDM
This fixture supports RDM operation. RDM (Remote Device Management) is a bi-directional communications
protocol for use in DMX512 control systems, it is the new open standard for DMX512 device configuration and
status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without adversely affecting
24
existing non-RDM equipment. By using a special „Start Code,“ and by complying with the timing specifications
for DMX512, the RDM protocol allows a console or dedicated RDM controller to send commands to and receive
messages from specific moving lights.
RDM allows explicit commands to be sent to a device and responses to be received from it.
The list of commands for the Robin ColorStrobe Lite is the following.
Parameter ID
Discovery command SET command
DISC_UNIQUE_BRANCH
*
DISC_MUTE
*
DISC_UN_MUTE
*
GET command
DEVICE_INFO
*
SUPPORTED_PARAMETERS
*
*
SOFTWARE_VERSION_LABEL
DMX_START_ADDRESS
*
*
IDENTIFY_DEVICE
*
*
DEVICE_MODEL_DESCRIPTION
*
MANUFACTURER_LABEL
*
*
DEVICE_LABEL
*
SENSOR_DEFINITION
*
SENSOR_VALUE
*
DISPLAY_INVERT
*
*
DISPLAY_LEVEL
*
*
PAN_INVERT
*
*
TILT_INVERT
*
*
DEVICE_RESET
*
DMX_PERSONALITY
*
*
DMX_PERSONALITY_DESCRIPTION
*
STATUS_MESSAGES
*
STATUS_ID_DESCRIPTION
*
DEVICE_HOURS
*
PARAMETER_DESCRIPTION
*
ROBE_DMX_INPUT
*
ROBE_WIRELESS_UNLINK
*
*
9. Wireless DMX operation
The wireless DMX version of the Robin ColorStrobe Lite is equipped with the Lumen Radio CRMX module
and antenna for receiving DMX signal. CRMX module operates on the 2.4 GHz band.
The item " Wireless " from the menu "DMX Input" allows you to activate receiving of wireless DMX (Personality--> DMX Input -->Wireless.).
To link the fixture with DMX transmitter.
The fixture can be only linked with the transmitter by running the link procedure at DMX transmitter .
After linking , the level of DMX signal ( 0-100 %) is displayed in the menu item “Wireless State“ (Information
-->Wireless State).
To unlink the fixture from DMX transmitter.
The fixture can be unlinked from receiver via the menu item “ Unlink Wireless Adapter“ (Information--> Wireless
State --> Unlink Wireless Adapter.).
25
10. Error and information messages
Occurred errors during fixture operation are signalled by the yellow warning icon at the bottom line of the screen:
Touch the warning icon or press the [ESCAPE] button to display error messages.
List of error and information messages:
Temp. Sensor Error
The message informs you that the communication between the head temperature sensor and the main processor failed.
LED Zone 1 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 1.
LED Zone 2 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 2.
LED Zone 3 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 3.
LED Zone 4 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 4.
LED Zone 5 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 5.
LED Zone 6 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 6.
LED Zone 7 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 7.
LED Zone 8 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 8.
LED Zone 9 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 9.
LED Zone 10 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 10.
LED Zone 11 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 11.
LED Zone 12 Short Error
The message informs you that short circuit has occured on the PCB of LED zone 12.
Internal Error 1
Communication error between PCBs (error or noise was detected on communication wires)
Internal Error 2
Ballast communication error (some PCB has failed or is disconnected (this PCB will show as N/A in menu -->
Information --> Software versions) or error/noise was detected on communication wires)
26
11. Technical Specifications
Electrical
Power supply:.........................electronic auto-ranging
Input voltage range:............... 100-240V, 50/60Hz
Fuse:.......................................T15 A
Max. power consumption:.......1300 W @230V (power factor=0,99, I=5.7A)
Optic
Light source: 120 x 15W RGBW multichips
4 or 12 LED zones with individual control of each
Typical Lumen Maintenance: 70% @ 40,000 hours
LED life expectancy: 40.000 hours
Virtual colour wheel
Zone effectsl
237 colours including whites (2700K, 3200K, 4200K, 5600K and 8000K)
Halogen lamp effect at whites 2700K and 3200K
Rainbow effect with in both directions with variable speed
Zone effects in both directions with variable speed
Strobe
Strobe effect with variable speed
Pulses adjustment: frequency, duration, intensity
Special effects: rump up, rump down, rump up/down, random, lighting, spikes
Control
Graphic touch screen for fixture setting and addressing
Gravitation sensor for auto screen positioning
Battery backup of the touch screen
Readout fixture usage, receiving DMX values, temperatures, etc
Built-in analyzer for easy fault finding, error messages
Built-in demo sequences
Stand-alone operation
3 user editable programs, each up to 88 steps
Supported protocols: USITT DMX 512, RDM, ArtNet, MANet, MANet2, sACN
Support of RDM (Remote Device Management)
5 DMX modes (9, 14, 18, 28,84 control channels)
Optional Wireless DMX/RDM module
Compliance with USITT DMX-512 (1986 & 1990) and 512-A
Full DMX fidelity and frame integrity
Auto sensing of DMX frame rate and frame size
<5ms DMX latency
Operational frequency range of 2402-2480 MHz
Producer: LumenRadio
Connection
DMX data in/out: Locking 5-pin XLR
Ethernet: RJ45
Power: Neutrik NAC3MPX
Rigging
via U-bracket
27
Temperatures
Maximum ambient temperature: 45°C
Maximum housing temperature : 90° C
Minimum distances
Min. distance from flammable surfaces: 0.5 m
Min. distance to lighted object: 1m
Total heat dissipation
4260 BTU/h (calculated)
Weight (net):
13.4 kg
Dimensions (mm)
Protection factor
IP 2X
Accessories
1 x Mounting bracket Omega CL assembled (P/N 99010420)
Optional accessories
(P/N 10 980 276) Floor stands for Robin Strobe Lite/Colour Strobe Lite
(P/N 10 980 262) Bandoor for Robin Strobe/ColourStrobe/Strobe Lite/ColorStrobe Lite
(P/N 10 980 263) Frame Adaptor for Robin Strobe/ColourStrobe/Strobe Lite/ColorStrobe Lite
(P/N 10 980 264) Gel Frame for Robin Strobe/ColourStrobe/Strobe Lite/ColorStrobe Lite
(P/N 10 980 033) Omega Adaptor CL-regular 2 pcs
(P/N 17 030 386) Doughty Trigger Clamp
(P/N 99 011 963) Safety wire 35 kg
(P/N 13 052 276) Mains Cable PowerCon TRUE1 In/open ended, EU 2m, outdoor
(P/N 13 052 277) Mains Cable PowerCon TRUE1 In/open ended, US 2m, outdoor
(P/N 13 052 405) Mains Cable powerCON TRUE1 In/Schuko, 2m, Indoor
(P/N 13 052 406) Mains Cable powerCON TRUE1 In/US, 2m, Indoor
(P/N 13 052 445) Mains Cable powerCON TRUE1 In/CEE 16A, 2m, Indoor
(P/N 13 052 407) Mains Cable powerCON TRUE1 In/open ended, 2m, Indoor
28
Photometric chart
12. Maintenance and cleaning
DANGER !
Disconnect from the mains and allow to cool completely before starting any
cleaning or maintenance work
The front transparent cover will require monthly cleaning as smoke fluid tends to build up residues, reducing
the light output very quickly. For cleaning use a wet clout and a vacuum-cleaner or air-jet. Do not use solvents
or any other aggressive cleaning fluid.
The interior of the fixture including fans should be cleaned annually (or more often according operating conditions) using a vacuum-cleaner and a soft brush. A qualified electrician should service and clean the interior of
the fixture as disconnecting and connectinng electrical cables is required.
Should you need any spare parts, please use genuine parts.
More complicated maintenance and service operations are only to be carried out by authorized distributors.
29
To get access to the fixture´s inside
1. Unscrew three screws (1) along both sides of the rear cover (2).
2. Disconnect cables between rear cover and inside of the fixture (power, display, DMX).
3. Unscrew two screws (3) at each side of the chassis with power supply (4) and pull the chassis out
with care.
4. Now you can clear inside of the fixture including fans (5).
12.1 Replacing fuse
Only replace the fuse by a fuse of the same type and rating.
Before replacing the fuse, unplug mains lead!
1) Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing
(anti-clockwise).
2) Remove the old fuse from the fuse holder.
3) Install the new fuse in the fuse holder (only the same type and rating).
4) Replace the fuse holder in the housing and fix it.
12.2 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local
regulations and codes.
October 17, 2018
Copyright © 2016-2019 Robe Lighting - All rights reserved
Specifications are subject to change without notice.
Made in ROBE Lighting s.r.o., Palackého 416, 757 01 Valašské Meziříčí, Czech Republic
30
DMX protocol
Robin ColorStrobe/Robin ColorStrobe Light - DMX protocol
Version: 1.0
1
Mode/channel
2
3
4
5
1
1
1
*
*
*
2
*
*
*
DMX
value
*
3
4
2
*
*
*
0 - 255
Red or Cyan colour saturation control - fine
0 - 255
Green or Magenta colour saturation control - coarse (0-100%)
3
*
*
*
6
*
*
*
0 - 255
Green or Magenta colour saturation control - fine
*
5
7
8
9
4
*
5
*
*
*
10
6
*
11
7
*
Blue or Yellow colour saturation control - coarse (0-100%)
0 - 255
Blue or Yellow colour saturation control - fine
0-255
White colour saturation control - coarse (0-100%) -RGBW mode only
proportional
0 - 255
White colour saturation control - fine (RGBW mode only)
proportional
White foreground (8 bit) - all zones
*
proportional
White foreground (16 bit) - all zones
*
proportional
CTC
*
No function
Col. temperature correction
step
proportional
Virtual colour wheel
*
*
proportional
Blue/Yellow foreground (16bit) -all zones
0
1-2
3
4-5
6
7-9
10-12
13-15
16
17-55
56
57 - 95
96
97 – 134
135
136 - 174
175
176 -214
215
216 - 246
247
248-251
252-255
7
proportional
Blue/Yellow foreground (8 bit) - all zones
0
1-255
6
proportional
Green/Magenta foreground (16bit) - all zones
0 - 255
4
proportional
Green/Magenta foreground (8-bit) - all zones
*
5
Red orCyan colour saturation control - coarse (0-100%)
Red/Cyan foreground (16bit)- all zones
*
3
Type of
control
Red/Cyan foreground (8 bit)- all zones
0 - 255
2
Function
No function
White 2700 K
White 2700 K (Halogen lamp mode)*
White 3200 K
White 3200 K (Halogen lamp mode)*
White 4200 K
White 5600 K
White 8000 K
Blue (Blue=full, Red+Green+White=0)
Red=0, Green->up,Blue =full, White=0
Light Blue (Red=0, Green=full, Blue =full, White=0)
Red=0, Green=full, Blue->down, White=0
Green (Red=0, Green=full, Blue =0, White=0)
Red->up, Green=full, Blue=0, White=0
Yellow (Red=full, Green=full, Blue=0, White=0)
Red=full, Green->down, Blue=0, White=0
Red(Red=full, Green=0, Blue=0, White=0)
Red=full, Green=0, Blue->up, White=0
Magenta (Red=full, Green=0, Blue=full, White=0)
Red -> down, Green=0, Blue=full, White=0
Blue (Red=0, Green=0, Blue=full, White=0)
Rainbow effect (with fade time)from slow-> fast
Rainbow effect(without fade time) from slow-> fast
Intensity foreground (8bit)-all zones
Page 1
step
step
step
step
step
step
step
step
step
proportional
step
proportional
step
proportional
step
proportional
step
proportional
step
proportional
step
proportional
proportional
DMX protocol
1
Mode/channel
2
3
4
5
*
12
*
*
*
8
13
8
*
*
DMX
value
0-255
*
14
*
9
10
*
*
Coarse intensity from min. to max.
Fine intensity from min. to max.
*
11
*
proportional
proportional
Duration
0-255
Light time duration from min. —>max.
0-5
6-255
No flash
Flash frequency from min. —>max
Note: Duration time<Rate: flashing
Duration time>= Rate: Light continuously On
0-1
2-5
6-42
No function
Permanent lightening
Ramp up (use channels Duration and Rate for control)
step
Rate
*
step
step
Special effects
*
43-85 Ramp down (use channels Duration and Rate for control)
86-128 Ramp up/down (use channels Duration and Rate for control)
129-171 Random strobe (use channel Rate for control)
172-214 Lightning (use channel Rate for control)
215-255 Spikes (use channels Duration and Rate for control)
*
Type of
control
Intensity foreground (16bit)-all zones
0-255
9
Function
step
step
step
step
step
step
step
step
Special Functions
*
0 -19
Reserved
To activate following functions , stop in DMX value for at least 3
sec. Corresponding menu items are temporarily overrided.
20-24
25-29
30-34
35-39
40-44
45-49
50-54
55-59
60-64
65-69
70-74
75-79
80-84
85-89
90-94
95-255
*
*
12
*
*
*
*
13
*
*
*
*
*
14
15
*
*
step
White counting On
White counting Off
Dimmer curve: linear
Dimmer curve: square law
Reserved
step
step
step
step
step
step
step
step
step
step
step
step
step
step
Red/Cyan Background (8 bit)- all zones
0 - 255
*
Graphic display On
Graphic display Off
RGBW colour mixing mode
CMY colour mixing mode
Colour calibration On
Colour calibration Off
Foreground overwrites Background
Foreground + Background
Foreground and Background - standard (default) behaviour
Fans mode: Auto
Fans mode: high
Red or Cyan colour saturation control - coarse (0-100%)
proportional
Green/Magenta Background (8 bit) - all zones
0 - 255
Green or Magenta colour saturation control - coarse (0-100%)
0 - 255
Blue or Yellow colour saturation control - coarse (0-100%)
proportional
Blue/Yellow Background (8 bit) - all zones
*
proportional
White Background (8 bit) - all zones
*
0-255
White colour saturation control - coarse (0-100%)-only RGBW mode
Page 2
proportional
DMX protocol
1
Mode/channel
2
3
4
5
*
*
*
*
*
*
*
*
*
16
17
18
*
*
*
*
1
*
1
*
*
2
2
*
*
*
3
3
*
*
*
4
4
*
*
5
5
*
*
*
6
6
*
*
*
7
7
Function
Type of
control
Intensity Background (8bit)-all zones
0-255
Coarse intensity from min. to max.
0-2
3-4
5-6
7-8
9-10
11-12
13-14
15-16
17-18
19-20
21-22
23-24
25-26
27-28
29-30
31-32
33-34
35-36
37-38
39-40
41-42
43-44
45-46
47-48
49-50
51-52
53-255
No function
proportional
Zone Effects
*
*
*
DMX
value
step
Effect 1
Effect 2
Effect 3
Effect 4
Effect 5
Effect 6
Effect 7
Effect 8
Effect 9
Effect 10
Effect 11
Effect 12
Effect 13
Effect 14
Effect 15
Effect 16
Effect 17
Effect 18
Effect 19
Effect 20
Effect 21
Effect 22
Effect 23
Effect 24
Effect 25
Reserved
Zone Effects Speed
0-63
Speed from min. —>max. without fade time
64-127 Speed from max. —>min. without fade time (op. direction)
128-191 Speed from min. —>max. with fade time
192-255 Speed from max. —>min. with fade time (op. direction)
Red intensity (8bit)-zone 1
0-255 Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 1
0-255 Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 1
0-255 Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 1
0-255 Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 1
0-255 Coarse intensity from 0% to 100%
Duration - zone 1
0-255 Light time duration from min. —>max.
Rate - zone 1
Page 3
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
proportional
proportional
proportional
proportional
proportional
proportional
proportional
proportional
proportional
step
DMX protocol
1
Mode/channel
2
3
4
5
DMX
value
0-5
6-255
*
*
*
8
8
0-255
*
*
*
9
9
*
*
*
10
10
0-255
0-255
*
*
*
11
11
0-255
*
*
*
12
12
0-255
*
*
*
13
13
*
*
*
14
14
0-255
0-5
6-255
*
*
*
15
15
0-255
*
*
*
16
16
0-255
*
*
*
17
17
0-255
*
*
*
18
18
*
*
*
19
19
0-255
0-255
*
*
*
20
20
0-255
*
*
*
21
21
0-5
6-255
*
*
*
22
22
0-255
*
*
*
23
23
*
*
*
24
24
0-255
0-255
*
*
*
25
25
0-255
*
*
*
26
26
0-255
*
*
*
27
27
*
*
*
28
28
0-255
0-5
6-255
*
*
*
*
29
Function
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 2
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 2
Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 2
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 2
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 2
Coarse intensity from 0% to 100%
Duration - zone 2
Light time duration from min. —>max.
Rate - zone 2
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 3
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 3
Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 3
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 3
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 3
Coarse intensity from 0% to 100%
Duration - zone 3
Light time duration from min. —>max.
Rate - zone 3
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 4
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 4
Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 4
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 4
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 4
Coarse intensity from 0% to 100%
Duration - zone 4
Light time duration from min. —>max.
Rate - zone 4
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 5
Page 4
Type of
control
step
step
proportional
proportional
proportional
proportional
proportional
step
step
step
proportional
proportional
proportional
proportional
proportional
step
step
step
proportional
proportional
proportional
proportional
proportional
step
step
step
DMX protocol
1
Mode/channel
2
3
4
5
*
*
*
*
30
*
*
*
*
31
DMX
value
0-255
0-255
0-255
*
*
*
*
32
0-255
*
*
*
*
33
*
*
*
*
34
*
*
*
*
35
0-255
0-255
0-5
6-255
*
*
*
*
36
0-255
*
*
*
*
37
0-255
*
*
*
*
38
*
*
*
*
39
*
*
*
*
40
0-255
0-255
0-255
*
*
*
*
41
0-255
*
*
*
*
42
0-5
6-255
*
*
*
*
43
0-255
*
*
*
*
44
*
*
*
*
45
0-255
0-255
*
*
*
*
46
0-255
*
*
*
*
47
*
*
*
*
48
*
*
*
*
49
0-255
0-255
0-5
6-255
*
*
*
*
50
0-255
*
*
*
*
51
0-255
Function
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 5
Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 5
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 5
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 5
Coarse intensity from 0% to 100%
Duration - zone 5
Light time duration from min. —>max.
Rate - zone 5
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 6
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 6
Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 6
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 6
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 6
Coarse intensity from 0% to 100%
Duration - zone 6
Light time duration from min. —>max.
Rate - zone 6
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 7
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 7
Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 7
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 7
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 7
Coarse intensity from 0% to 100%
Duration - zone 7
Light time duration from min. —>max.
Rate - zone 7
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 8
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 8
Coarse green intensity from 0% to 100%
Page 5
Type of
control
proportional
proportional
proportional
proportional
proportional
step
step
step
proportional
proportional
proportional
proportional
proportional
step
step
step
proportional
proportional
proportional
proportional
proportional
step
step
step
proportional
proportional
DMX protocol
1
Mode/channel
2
3
4
5
*
*
52
*
*
DMX
value
0-255
*
*
*
*
53
0-255
*
*
*
*
54
*
*
*
*
55
0-255
0-255
*
*
*
*
56
0-5
6-255
*
*
*
*
57
0-255
*
*
*
*
58
0-255
*
*
*
*
59
*
*
*
*
60
0-255
0-255
*
*
*
*
61
0-255
*
*
*
*
62
0-255
*
*
*
*
63
0-5
6-255
*
*
*
*
64
*
*
*
*
65
*
*
*
*
66
0-255
0-255
0-255
*
*
*
*
67
0-255
*
*
*
*
68
*
*
*
*
69
0-255
0-255
*
*
*
*
70
0-5
6-255
*
*
*
*
71
0-255
*
*
*
*
72
0-255
*
*
*
*
73
*
*
*
*
74
0-255
Function
Blue intensity (8bit)-zone 8
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 8
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 8
Coarse intensity from 0% to 100%
Duration - zone 8
Light time duration from min. —>max.
Rate - zone 8
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 9
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 9
Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 9
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 9
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 9
Coarse intensity from 0% to 100%
Duration - zone 9
Light time duration from min. —>max.
Rate - zone 9
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 10
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 10
Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 10
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 10
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 10
Coarse intensity from 0% to 100%
Duration - zone 10
Light time duration from min. —>max.
Rate - zone 10
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 11
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 11
Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 11
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 11
Page 6
Type of
control
proportional
proportional
proportional
step
step
step
proportional
proportional
proportional
proportional
proportional
step
step
step
proportional
proportional
proportional
proportional
proportional
step
step
step
proportional
proportional
proportional
DMX protocol
1
Mode/channel
2
3
4
5
*
*
*
*
75
*
*
*
*
76
DMX
value
0-255
0-255
0-255
*
*
*
*
77
0-5
6-255
*
*
*
*
78
0-255
*
*
*
*
79
0-255
*
*
*
*
80
*
*
*
*
81
0-255
0-255
*
*
*
*
82
0-255
*
*
*
*
83
*
*
*
*
84
0-255
0-5
6-255
Function
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 11
Coarse intensity from 0% to 100%
Duration - zone 11
Light time duration from min. —>max.
Rate - zone 11
No flash
Flash frequency from min. —>max
Red intensity (8bit)-zone 12
Coarse red intensity from 0% to 100%
Green intensity (8bit)-zone 12
Coarse green intensity from 0% to 100%
Blue intensity (8bit)-zone 12
Coarse blue intensity from 0% to 100%
White intensity (8bit)-zone 12
Coarse white intensity from 0% to 100%
Intensity (8bit)-zone 12
Coarse intensity from 0% to 100%
Duration - zone 12
Light time duration from min. —>max.
Rate - zone 12
No flash
Flash frequency from min. —>max
* In the Halogen lamp mode the Dimmer channel imitates behaviour of the halogen lamp during dimming
Order of zones (front view) :
Mode 1,2,3
Mode 4
Mode 5
Page 7
Type of
control
proportional
proportional
step
step
step
proportional
proportional
proportional
proportional
proportional
step
step
step
DMX
Strobe Duration
50 and 60 Hz
[ms]
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
13,31
16,64
19,97
23,30
26,62
29,95
33,28
36,61
39,94
43,26
46,59
49,92
53,25
56,58
59,90
63,23
66,56
69,89
73,22
76,54
79,87
83,20
86,53
89,86
93,18
96,51
99,84
103,17
106,50
109,82
113,15
116,48
119,81
123,14
126,46
129,79
133,12
136,45
139,78
143,10
146,43
149,76
153,09
156,42
159,74
163,07
Strobe Rate
50Hz
60Hz
[ms]
[ms]
x
x
x
x
x
x
3460,00
2880,00
2320,00
2020,00
1740,00
1560,00
1400,00
1280,00
1160,00
1080,00
1000,00
940,00
880,00
820,00
780,00
740,00
700,00
660,00
640,00
600,00
580,00
560,00
540,00
520,00
500,00
480,00
480,00
460,00
440,00
420,00
420,00
400,00
400,00
380,00
380,00
360,00
360,00
340,00
340,00
320,00
x
x
x
x
x
x
2883,34
2400,00
1933,34
1683,34
1450,00
1300,00
1166,67
1066,67
966,67
900,00
833,34
783,33
733,33
683,33
650,00
616,67
583,33
550,00
533,33
500,00
483,33
466,67
450,00
433,33
416,67
400,00
400,00
383,33
366,67
350,00
350,00
333,33
333,33
316,67
316,67
300,00
300,00
283,33
283,33
266,67
Strobe Rate
50Hz
60Hz
[Hz]
[Hz]
x
x
x
x
x
x
0,289
0,347
0,431
0,495
0,575
0,641
0,714
0,781
0,862
0,926
1,000
1,064
1,136
1,220
1,282
1,351
1,429
1,515
1,563
1,667
1,724
1,786
1,852
1,923
2,000
2,083
2,083
2,174
2,273
2,381
2,381
2,500
2,500
2,632
2,632
2,778
2,778
2,941
2,941
3,125
x
x
x
x
x
x
0,347
0,417
0,517
0,594
0,690
0,769
0,857
0,937
1,034
1,111
1,200
1,277
1,364
1,463
1,538
1,622
1,714
1,818
1,875
2,000
2,069
2,143
2,222
2,308
2,400
2,500
2,500
2,609
2,727
2,857
2,857
3,000
3,000
3,158
3,158
3,333
3,333
3,529
3,529
3,750
Lightning Rate
50Hz
60Hz
[ms]
[ms]
2600,00
2600,00
2580,00
2580,00
2560,00
2560,00
2540,00
2540,00
2520,00
2520,00
2500,00
2500,00
2480,00
2480,00
2460,00
2460,00
2440,00
2440,00
2420,00
2420,00
2400,00
2400,00
2380,00
2380,00
2360,00
2360,00
2340,00
2340,00
2320,00
2320,00
2300,00
2300,00
2280,00
2280,00
2260,00
2260,00
2240,00
2240,00
2220,00
2220,00
2200,00
2200,00
2180,00
2180,00
2160,00
2160,00
2166,67
2166,67
2150,00
2150,00
2133,34
2133,34
2116,67
2116,67
2100,00
2100,00
2083,34
2083,34
2066,67
2066,67
2050,00
2050,00
2033,34
2033,34
2016,67
2016,67
2000,00
2000,00
1983,34
1983,34
1966,67
1966,67
1950,00
1950,00
1933,34
1933,34
1916,67
1916,67
1900,00
1900,00
1883,34
1883,34
1866,67
1866,67
1850,00
1850,00
1833,34
1833,34
1816,67
1816,67
1800,00
1800,00
DMX
Strobe Duration
50 and 60 Hz
[ms]
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
166,40
169,73
173,06
176,38
179,71
183,04
186,37
189,70
193,02
196,35
199,68
203,01
206,34
209,66
212,99
216,32
219,65
222,98
226,30
229,63
232,96
236,29
239,62
242,94
246,27
249,60
252,93
256,26
259,58
262,91
266,24
269,57
272,90
276,22
279,55
282,88
286,21
289,54
292,86
296,19
299,52
302,85
306,18
309,50
312,83
316,16
319,49
Strobe Rate
50Hz
60Hz
[ms]
[ms]
320,00
320,00
320,00
300,00
300,00
280,00
280,00
260,00
260,00
260,00
260,00
240,00
240,00
240,00
240,00
220,00
220,00
220,00
220,00
220,00
220,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
160,00
160,00
160,00
160,00
160,00
160,00
160,00
160,00
140,00
140,00
266,67
266,67
266,67
250,00
250,00
233,33
233,33
216,67
216,67
216,67
216,67
200,00
200,00
200,00
200,00
183,33
183,33
183,33
183,33
183,33
183,33
166,67
166,67
166,67
166,67
166,67
166,67
166,67
166,67
150,00
150,00
150,00
150,00
150,00
150,00
150,00
150,00
133,33
133,33
133,33
133,33
133,33
133,33
133,33
133,33
116,67
116,67
Strobe Rate
50Hz
60Hz
[Hz]
[Hz]
3,125
3,125
3,125
3,333
3,333
3,571
3,571
3,846
3,846
3,846
3,846
4,167
4,167
4,167
4,167
4,545
4,545
4,545
4,545
4,545
4,545
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,556
5,556
5,556
5,556
5,556
5,556
5,556
5,556
6,250
6,250
6,250
6,250
6,250
6,250
6,250
6,250
7,143
7,143
3,750
3,750
3,750
4,000
4,000
4,286
4,286
4,615
4,615
4,615
4,615
5,000
5,000
5,000
5,000
5,455
5,455
5,455
5,455
5,455
5,455
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,000
6,667
6,667
6,667
6,667
6,667
6,667
6,667
6,667
7,500
7,500
7,500
7,500
7,500
7,500
7,500
7,500
8,571
8,571
Lightning Rate
50Hz
60Hz
[ms]
[ms]
2140,00
2140,00
2120,00
2120,00
2100,00
2100,00
2080,00
2080,00
2060,00
2060,00
2040,00
2040,00
2020,00
2020,00
2000,00
2000,00
1980,00
1980,00
1960,00
1960,00
1940,00
1940,00
1920,00
1920,00
1900,00
1900,00
1880,00
1880,00
1860,00
1860,00
1840,00
1840,00
1820,00
1820,00
1800,00
1800,00
1780,00
1780,00
1760,00
1760,00
1740,00
1740,00
1720,00
1720,00
1700,00
1700,00
1680,00
1783,34
1783,34
1766,67
1766,67
1750,00
1750,00
1733,34
1733,34
1716,67
1716,67
1700,00
1700,00
1683,34
1683,34
1666,67
1666,67
1650,00
1650,00
1633,34
1633,34
1616,67
1616,67
1600,00
1600,00
1583,34
1583,34
1566,67
1566,67
1550,00
1550,00
1533,34
1533,34
1516,67
1516,67
1500,00
1500,00
1483,34
1483,34
1466,67
1466,67
1450,00
1450,00
1433,34
1433,34
1416,67
1416,67
1400,00
DMX
Strobe Duration
50 and 60 Hz
[ms]
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
322,82
326,14
329,47
332,80
336,13
339,46
342,78
346,11
349,44
352,77
356,10
359,42
362,75
366,08
369,41
372,74
376,06
379,39
382,72
386,05
389,38
392,70
396,03
399,36
402,69
406,02
409,34
412,67
416,00
419,33
422,66
425,98
429,31
432,64
435,97
439,30
442,62
445,95
449,28
452,61
455,94
459,26
462,59
465,92
469,25
472,58
475,90
Strobe Rate
50Hz
60Hz
[ms]
[ms]
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
83,33
Strobe Rate
50Hz
60Hz
[Hz]
[Hz]
7,143
7,143
7,143
7,143
7,143
7,143
7,143
7,143
7,143
7,143
8,333
8,333
8,333
8,333
8,333
8,333
8,333
8,333
8,333
8,333
8,333
8,333
8,333
8,333
8,333
8,333
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
8,571
8,571
8,571
8,571
8,571
8,571
8,571
8,571
8,571
8,571
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
12,000
Lightning Rate
50Hz
60Hz
[ms]
[ms]
1680,00
1660,00
1660,00
1640,00
1640,00
1620,00
1620,00
1600,00
1600,00
1580,00
1580,00
1560,00
1560,00
1540,00
1540,00
1520,00
1520,00
1500,00
1500,00
1480,00
1480,00
1460,00
1460,00
1440,00
1440,00
1420,00
1420,00
1400,00
1400,00
1380,00
1380,00
1360,00
1360,00
1340,00
1340,00
1320,00
1320,00
1300,00
1300,00
1280,00
1280,00
1260,00
1260,00
1240,00
1240,00
1220,00
1220,00
1400,00
1383,34
1383,34
1366,67
1366,67
1350,00
1350,00
1333,34
1333,34
1316,67
1316,67
1300,00
1300,00
1283,34
1283,34
1266,67
1266,67
1250,00
1250,00
1233,34
1233,34
1216,67
1216,67
1200,00
1200,00
1183,34
1183,34
1166,67
1166,67
1150,00
1150,00
1133,34
1133,34
1116,67
1116,67
1100,00
1100,00
1083,34
1083,34
1066,67
1066,67
1050,00
1050,00
1033,34
1033,34
1016,67
1016,67
DMX
Strobe Duration
50 and 60 Hz
[ms]
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
479,23
482,56
485,89
489,22
492,54
495,87
499,20
502,53
505,86
509,18
512,51
515,84
519,17
522,50
525,82
529,15
532,48
535,81
539,14
542,46
545,79
549,12
552,45
555,78
559,10
562,43
565,76
569,09
572,42
575,74
579,07
582,40
585,73
589,06
592,38
595,71
599,04
602,37
605,70
609,02
612,35
615,68
619,01
622,34
625,66
628,99
632,32
Strobe Rate
50Hz
60Hz
[ms]
[ms]
100,00
100,00
100,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
80,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
83,33
83,33
83,33
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
66,67
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
Strobe Rate
50Hz
60Hz
[Hz]
[Hz]
10,000
10,000
10,000
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
12,500
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
12,000
12,000
12,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
Lightning Rate
50Hz
60Hz
[ms]
[ms]
1200,00
1200,00
1180,00
1180,00
1160,00
1160,00
1140,00
1140,00
1120,00
1120,00
1100,00
1100,00
1080,00
1080,00
1060,00
1060,00
1040,00
1040,00
1020,00
1020,00
1000,00
1000,00
980,00
980,00
960,00
960,00
940,00
940,00
920,00
920,00
900,00
900,00
880,00
880,00
860,00
860,00
840,00
840,00
820,00
820,00
800,00
800,00
780,00
780,00
760,00
760,00
740,00
1000,00
1000,00
983,34
983,34
966,67
966,67
950,00
950,00
933,34
933,34
916,67
916,67
900,00
900,00
883,34
883,34
866,67
866,67
850,00
850,00
833,34
833,34
816,67
816,67
800,00
800,00
783,33
783,33
766,67
766,67
750,00
750,00
733,33
733,33
716,67
716,67
700,00
700,00
683,33
683,33
666,67
666,67
650,00
650,00
633,33
633,33
616,67
DMX
Strobe Duration
50 and 60 Hz
[ms]
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
635,65
638,98
642,30
645,63
648,96
652,29
655,62
658,94
662,27
665,60
668,93
672,26
675,58
678,91
682,24
685,57
688,90
692,22
695,55
698,88
702,21
705,54
708,86
712,19
715,52
718,85
722,18
725,50
728,83
732,16
735,49
738,82
742,14
745,47
748,80
752,13
755,46
758,78
762,11
765,44
768,77
772,10
775,42
778,75
782,08
785,41
788,74
Strobe Rate
50Hz
60Hz
[ms]
[ms]
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
60,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
50,00
Strobe Rate
50Hz
60Hz
[Hz]
[Hz]
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
16,667
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
20,000
Lightning Rate
50Hz
60Hz
[ms]
[ms]
740,00
720,00
720,00
700,00
700,00
680,00
680,00
660,00
660,00
640,00
640,00
620,00
620,00
600,00
600,00
580,00
580,00
560,00
560,00
540,00
540,00
520,00
520,00
500,00
500,00
480,00
480,00
460,00
460,00
440,00
440,00
420,00
420,00
400,00
400,00
380,00
380,00
360,00
360,00
340,00
340,00
320,00
320,00
300,00
300,00
280,00
280,00
616,67
600,00
600,00
583,33
583,33
566,67
566,67
550,00
550,00
533,33
533,33
516,67
516,67
500,00
500,00
483,33
483,33
466,67
466,67
450,00
450,00
433,33
433,33
416,67
416,67
400,00
400,00
383,33
383,33
366,67
366,67
350,00
350,00
333,33
333,33
316,67
316,67
300,00
300,00
283,33
283,33
266,67
266,67
250,00
250,00
233,33
233,33
DMX
Strobe Duration
50 and 60 Hz
[ms]
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
792,06
795,39
798,72
802,05
805,38
808,70
812,03
815,36
818,69
822,02
825,34
828,67
832,00
835,33
838,66
841,98
845,31
848,64
851,97
855,30
858,62
861,95
Strobe Rate
50Hz
60Hz
[ms]
[ms]
60,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
50,00
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
33,33
Strobe Rate
50Hz
60Hz
[Hz]
[Hz]
16,667
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
25,000
20,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
30,000
Lightning Rate
50Hz
60Hz
[ms]
[ms]
260,00
260,00
240,00
240,00
220,00
220,00
200,00
200,00
180,00
180,00
160,00
160,00
140,00
140,00
120,00
120,00
100,00
100,00
80,00
80,00
60,00
60,00
216,67
216,67
200,00
200,00
183,33
183,33
166,67
166,67
150,00
150,00
133,33
133,33
116,67
116,67
100,00
100,00
83,33
83,33
66,67
66,67
50,00
50,00
DMX
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
Ramping Duration
50Hz
60Hz
[ms]
[ms]
2480,00
2380,00
2280,00
2180,00
2080,00
1980,00
1880,00
1780,00
1680,00
1620,00
1560,00
1500,00
1440,00
1380,00
1320,00
1260,00
1220,00
1180,00
1160,00
1120,00
1100,00
1080,00
1040,00
1020,00
1000,00
960,00
940,00
920,00
900,00
880,00
860,00
840,00
820,00
800,00
780,00
760,00
760,00
740,00
720,00
700,00
700,00
680,00
660,00
660,00
640,00
620,00
2066,67
1983,34
1900,00
1816,67
1733,34
1650,00
1566,67
1483,34
1400,00
1350,00
1300,00
1250,00
1200,00
1150,00
1100,00
1050,00
1016,67
983,34
966,67
933,34
916,67
900,00
866,67
850,00
833,34
800,00
783,33
766,67
750,00
733,33
716,67
700,00
683,33
666,67
650,00
633,33
633,33
616,67
600,00
583,33
583,33
566,67
550,00
550,00
533,33
516,67
Ramping Rate
50Hz
60Hz
[Hz]
[Hz]
2600,00
2600,00
2580,00
2580,00
2560,00
2560,00
2540,00
2540,00
2520,00
2520,00
2500,00
2500,00
2480,00
2480,00
2460,00
2460,00
2440,00
2440,00
2420,00
2420,00
2400,00
2400,00
2380,00
2380,00
2360,00
2360,00
2340,00
2340,00
2320,00
2320,00
2300,00
2300,00
2280,00
2280,00
2260,00
2260,00
2240,00
2240,00
2220,00
2220,00
2200,00
2200,00
2180,00
2180,00
2160,00
2160,00
2166,67
2166,67
2150,00
2150,00
2133,34
2133,34
2116,67
2116,67
2100,00
2100,00
2083,34
2083,34
2066,67
2066,67
2050,00
2050,00
2033,34
2033,34
2016,67
2016,67
2000,00
2000,00
1983,34
1983,34
1966,67
1966,67
1950,00
1950,00
1933,34
1933,34
1916,67
1916,67
1900,00
1900,00
1883,34
1883,34
1866,67
1866,67
1850,00
1850,00
1833,34
1833,34
1816,67
1816,67
1800,00
1800,00
DMX
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
Ramping Duration
50Hz
60Hz
[ms]
[ms]
620,00
600,00
600,00
580,00
580,00
580,00
560,00
560,00
560,00
540,00
540,00
540,00
520,00
520,00
500,00
500,00
480,00
480,00
480,00
460,00
460,00
460,00
460,00
440,00
440,00
440,00
440,00
420,00
420,00
420,00
420,00
400,00
400,00
400,00
400,00
380,00
380,00
380,00
380,00
360,00
360,00
360,00
360,00
340,00
340,00
340,00
340,00
516,67
500,00
500,00
483,33
483,33
483,33
466,67
466,67
466,67
450,00
450,00
450,00
433,33
433,33
416,67
416,67
400,00
400,00
400,00
383,33
383,33
383,33
383,33
366,67
366,67
366,67
366,67
350,00
350,00
350,00
350,00
333,33
333,33
333,33
333,33
316,67
316,67
316,67
316,67
300,00
300,00
300,00
300,00
283,33
283,33
283,33
283,33
Ramping Rate
50Hz
60Hz
[Hz]
[Hz]
2140,00
2140,00
2120,00
2120,00
2100,00
2100,00
2080,00
2080,00
2060,00
2060,00
2040,00
2040,00
2020,00
2020,00
2000,00
2000,00
1980,00
1980,00
1960,00
1960,00
1940,00
1940,00
1920,00
1920,00
1900,00
1900,00
1880,00
1880,00
1860,00
1860,00
1840,00
1840,00
1820,00
1820,00
1800,00
1800,00
1780,00
1780,00
1760,00
1760,00
1740,00
1740,00
1720,00
1720,00
1700,00
1700,00
1680,00
1783,34
1783,34
1766,67
1766,67
1750,00
1750,00
1733,34
1733,34
1716,67
1716,67
1700,00
1700,00
1683,34
1683,34
1666,67
1666,67
1650,00
1650,00
1633,34
1633,34
1616,67
1616,67
1600,00
1600,00
1583,34
1583,34
1566,67
1566,67
1550,00
1550,00
1533,34
1533,34
1516,67
1516,67
1500,00
1500,00
1483,34
1483,34
1466,67
1466,67
1450,00
1450,00
1433,34
1433,34
1416,67
1416,67
1400,00
DMX
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
Ramping Duration
50Hz
60Hz
[ms]
[ms]
340,00
340,00
340,00
340,00
320,00
320,00
320,00
320,00
320,00
320,00
320,00
320,00
300,00
300,00
300,00
300,00
280,00
280,00
280,00
280,00
260,00
260,00
260,00
260,00
260,00
260,00
260,00
260,00
260,00
260,00
260,00
260,00
260,00
260,00
260,00
260,00
240,00
240,00
240,00
240,00
240,00
240,00
240,00
240,00
220,00
220,00
220,00
283,33
283,33
283,33
283,33
266,67
266,67
266,67
266,67
266,67
266,67
266,67
266,67
250,00
250,00
250,00
250,00
233,33
233,33
233,33
233,33
216,67
216,67
216,67
216,67
216,67
216,67
216,67
216,67
216,67
216,67
216,67
216,67
216,67
216,67
216,67
216,67
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
183,33
183,33
183,33
Ramping Rate
50Hz
60Hz
[Hz]
[Hz]
1680,00
1660,00
1660,00
1640,00
1640,00
1620,00
1620,00
1600,00
1600,00
1580,00
1580,00
1560,00
1560,00
1540,00
1540,00
1520,00
1520,00
1500,00
1500,00
1480,00
1480,00
1460,00
1460,00
1440,00
1440,00
1420,00
1420,00
1400,00
1400,00
1380,00
1380,00
1360,00
1360,00
1340,00
1340,00
1320,00
1320,00
1300,00
1300,00
1280,00
1280,00
1260,00
1260,00
1240,00
1240,00
1220,00
1220,00
1400,00
1383,34
1383,34
1366,67
1366,67
1350,00
1350,00
1333,34
1333,34
1316,67
1316,67
1300,00
1300,00
1283,34
1283,34
1266,67
1266,67
1250,00
1250,00
1233,34
1233,34
1216,67
1216,67
1200,00
1200,00
1183,34
1183,34
1166,67
1166,67
1150,00
1150,00
1133,34
1133,34
1116,67
1116,67
1100,00
1100,00
1083,34
1083,34
1066,67
1066,67
1050,00
1050,00
1033,34
1033,34
1016,67
1016,67
DMX
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
Ramping Duration
50Hz
60Hz
[ms]
[ms]
220,00
220,00
220,00
220,00
220,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
200,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
180,00
160,00
160,00
160,00
160,00
160,00
160,00
160,00
160,00
160,00
160,00
183,33
183,33
183,33
183,33
183,33
166,67
166,67
166,67
166,67
166,67
166,67
166,67
166,67
166,67
166,67
166,67
166,67
166,67
166,67
166,67
166,67
150,00
150,00
150,00
150,00
150,00
150,00
150,00
150,00
150,00
150,00
150,00
150,00
150,00
150,00
150,00
150,00
133,33
133,33
133,33
133,33
133,33
133,33
133,33
133,33
133,33
133,33
Ramping Rate
50Hz
60Hz
[Hz]
[Hz]
1200,00
1200,00
1180,00
1180,00
1160,00
1160,00
1140,00
1140,00
1120,00
1120,00
1100,00
1100,00
1080,00
1080,00
1060,00
1060,00
1040,00
1040,00
1020,00
1020,00
1000,00
1000,00
980,00
980,00
960,00
960,00
940,00
940,00
920,00
920,00
900,00
900,00
880,00
880,00
860,00
860,00
840,00
840,00
820,00
820,00
800,00
800,00
780,00
780,00
760,00
760,00
740,00
1000,00
1000,00
983,34
983,34
966,67
966,67
950,00
950,00
933,34
933,34
916,67
916,67
900,00
900,00
883,34
883,34
866,67
866,67
850,00
850,00
833,34
833,34
816,67
816,67
800,00
800,00
783,33
783,33
766,67
766,67
750,00
750,00
733,33
733,33
716,67
716,67
700,00
700,00
683,33
683,33
666,67
666,67
650,00
650,00
633,33
633,33
616,67
DMX
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
Ramping Duration
50Hz
60Hz
[ms]
[ms]
160,00
160,00
160,00
160,00
160,00
160,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
140,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
133,33
133,33
133,33
133,33
133,33
133,33
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
116,67
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
Ramping Rate
50Hz
60Hz
[Hz]
[Hz]
740,00
720,00
720,00
700,00
700,00
680,00
680,00
660,00
660,00
640,00
640,00
620,00
620,00
600,00
600,00
580,00
580,00
560,00
560,00
540,00
540,00
520,00
520,00
500,00
500,00
480,00
480,00
460,00
460,00
440,00
440,00
420,00
420,00
400,00
400,00
380,00
380,00
360,00
360,00
340,00
340,00
320,00
320,00
300,00
300,00
280,00
280,00
616,67
600,00
600,00
583,33
583,33
566,67
566,67
550,00
550,00
533,33
533,33
516,67
516,67
500,00
500,00
483,33
483,33
466,67
466,67
450,00
450,00
433,33
433,33
416,67
416,67
400,00
400,00
383,33
383,33
366,67
366,67
350,00
350,00
333,33
333,33
316,67
316,67
300,00
300,00
283,33
283,33
266,67
266,67
250,00
250,00
233,33
233,33
DMX
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
Ramping Duration
50Hz
60Hz
[ms]
[ms]
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
120,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
100,00
Ramping Rate
50Hz
60Hz
[Hz]
[Hz]
260,00
260,00
240,00
240,00
220,00
220,00
200,00
200,00
180,00
180,00
160,00
160,00
140,00
140,00
120,00
120,00
100,00
100,00
80,00
80,00
60,00
60,00
216,67
216,67
200,00
200,00
183,33
183,33
166,67
166,67
150,00
150,00
133,33
133,33
116,67
116,67
100,00
100,00
83,33
83,33
66,67
66,67
50,00
50,00
31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement