Robe Robin T1 Profile User Manual

Robe Robin T1 Profile User Manual
Version 1.9
1
Robin T1 Profile
Robin T1 Profile FS
Table of contents
1. Safety instructions.......................................................................................................... 3
2. Operating determination................................................................................................. 4
3. Fixture exterior view ...................................................................................................... 5
4. Installation....................................................................................................................... 6
4.1 Connection to the mains............................................................................................. 6
4.2 Replacing the frost ..................................................................................................... 6
4.3 Replacing gobos ........................................................................................................ 7
4.4 Installing the top hat.................................................................................................... 8
4.5 Rigging the fixture....................................................................................................... 9
4.6 DMX-512 connection................................................................................................. 11
4.7 Ethernet connection.................................................................................................. 12
4.8 Wireless DMX operation........................................................................................... 14
5. Remotely controllable functions.................................................................................. 15
5.1 Colour influencing functions...................................................................................... 15
5.2 Effect functions.......................................................................................................... 18
6. Control menu map......................................................................................................... 20
7. Control menu ................................................................................................................ 24
7.1 Tab " Address"........................................................................................................... 25
7.2 Tab "Information"....................................................................................................... 26
7.3 Tab "Personality"....................................................................................................... 28
7.4 Tab "Manual Control"................................................................................................. 30
7.5 Tab "Stand-alone" ..................................................................................................... 30
7.6 Tab "Service"............................................................................................................. 31
8. RDM................................................................................................................................ 34
9. Error and information messages................................................................................. 35
10. Technical Specifications............................................................................................. 38
11. Maintenance and cleaning.......................................................................................... 43
11.1 Disposing of the product.......................................................................................... 44
12. ChangeLog .................................................................................................................. 44
2
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOU INITIAL START - UP!
1. Safety instructions
Every person involved with installation and maintenance of this device have to:
- be qualified
- follow the instructions of this manual
CAUTION!
Be careful with your operations.
With a high voltage you can suffer
a dangerous electric shock when touching the wires!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes
written in this manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this
manual or any unauthorized modification to the device.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
Never let the power-cord come into contact with other cables! Handle the power cord and all connections with
the mains with particular caution!
Make sure that the available voltage is not higher than stated on the rear panel.
WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable
to completely remove power from unit when not in use or before cleaning or servicing the unit.
Make sure that the power cord is never crimped or damaged by sharp edges. Check the device and the power-cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power-cord by the plug. Never pull out the plug by tugging the power cord.
This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth.
The electric connection, repairs and servicing must be carried out by a qualified employee.
Do not connect this device to a dimmer pack.
During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily
mean that the device is defective.
Do not touch the device’s housing bare hands during its operation (housing becomes hot)!
For replacement use fuses of same type and rating only.
LED light emission. Risk of eye injury.
Do not look straight at the fixture´s LED source during operation. The intense light
beam may damage your eyes.
3
Do not view the light output with optical instruments or any device that may
concentrate the beam.
The light source contains blue LEDs.
CAUTION! Risk group 2, RG-2
2. Operating determination
This device is a moving head for creating decorative effects and was designed for indoor use only.
This device is for professional use only. It is not for household use.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the device switched off until
it has reached room temperature.
Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged. Always hold the
fixture at the transport handles.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture
or dust. There should not be any cables lying around. You endanger your own and the safety of others!
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.
Always fix the fixture with an appropriate safety wire. Fix the safety wire at the correct holes only.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
The maximum ambient temperature 45°C must never be exceeded.
CAUTION!
The front lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Do not block the front objective lens with any object when the fixture is under operation.
The fixture housing never must be covered with cloth or other materials.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns, electric shock, burns etc.
CAUTION!
To avoid damage of the internal parts of the fixture head, never let the sunlight lights
directly to the front lens , even when the fixture is not working !
Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to the standard
EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video, audiovisual and entertainment lighting control apparatus for professional use. Part 2: Immunity.
The installation company should check levels of possible interferences above the tested levels E1,E2,E3 given
by this standard (e.g. transmitters in surrounding area) before installing the equipment.
Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility of multimedia
equipment – Emission Requirements according to class B.
4
3. Fixture exterior view
1 - Front lens
2 - Camera*
3 - Arm
4 - Handle
5 - Base
6 - Pan lock
7 - Tilt lock
8 - Head
*T1 Profile FS only
The head has to be locked for transportation- the tilt lock latch (7) and the pan lock latch (6) have to be in the
locked positions. To unlock the head, move these latches to unlock positions before operating the fixture.
Rear panel of the base:
9 - 3-pin DMX output
10 - 5-pin DMX output
11 - Ethernet input (RJ45)
12 - Fuse holder
13 - 3-pin DMX input
14 - 5-pin DMX input
15 - Camera output (RJ 45)*
16 - Power (PowerCon True 1)
* T1 Profile FS only
Front panel of the base:
17 - QVGA touch screen
18 - ESCAPE button
19 - NEXT button
20 - ENTER/DISPLAY ON button
21 - PREV button
22 - USB port
The ENTER/DISPLAY ON button also serves for switching the display on when the fixture is disconnected
from the mains.
5
4. Installation
Fixtures must be installed by a qualified electrician in accordance with all
national and local electrical and construction codes and regulations.
4.1 Connection to the mains
For protection from electric shock, the fixture must be earthed!
The Robin T1 Profile is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz
AC power source from 100-240 Volts.
Power cable is enclosed to the fixture.If you need to install a power plug on the power cable to allow connection
to power outlets, install a grounding-type (earthed) plug, following the plug manufacturer’s instructions. If you
have any doubts about proper installation, consult a qualified electrician.
Core (EU)
Core (US)
Connection
Plug Terminal Marking
Brown
Black
Live
L
Light blue
White
Neutral
N
Yellow/Green
Green
Earth
This device falls under class one and must be earthed (grounded).
To apply power, first check that the head pan and tilt locks are released.
4.2 Replacing the frost
Unplug the fixture from mains before installing the frost module!
To replace the frost module.
1. Disconnect the fixture from mains and allow it to cool for 10 minutes.
2. Remove plastic cover of the head by loosening the 2 quarter-turn fasteners on the cover to get access to
the frost module (1).
3. The holder (2) of the frost foil is fastened to the frost holder (3) by means of the four magnets (4). Grip the
holder (2) and carefully tilt it out to break a force of magnets (4) on the frost holder (3).
4. Place a new frost module into the frost holder (3). Check, that both slots (6) snapped correctly into two
protrusions (5) in the holder (3).
5. Place the plastic cover back on the fixture before applying power.
6
4.3 Replacing gobos
Unplug the fixture from mains before replacing gobos!
Rotating gobos
1. Disconnect the fixture from mains and allow it to cool.
2. Remove the plastic cover of the head by loosening the 2 quarter-turn fasteners on the cover.
3. Gently pull up the gobo holder (3) from the rotation gobo wheel.
4. Remove the spring lock (1) with an appropriate tool (e.g. small-bladed screwdriver) and remove it.
Do not touch the surface of the pattern of the glass gobo with bare fingers.
5. Remove the original gobo (2) and insert the new one (glossy side towards the light source).
The Robe gobo has a small position point (8) at its edge which has to aim at the position point (4) on
the gobo holder (4). Insert the spring lock to secure correct gobo position in the gobo holder.
6. Insert he gobo holder back under the distance slots (6, 7) into rotating gobo wheel in this way, that its
position point (4) has to aim at a small toothlike projection (5) on the edge of the rotating gobo wheel.
Important! When inserting the gobo holder back to the rotating gobo wheel, one of the adjacent gobo holder
has to be oriented according to the same rule, it means that its position point (4) has to aimed at the toothlike
projection (5) on the edge of the rotating gobo wheel. You have keep both marks (4) and (5) side by side when
rotating the gobo wheel to the position allows inserting the gobo holder back.
5. Replace the plastic cover before applying power.
6. Use the menu Service to fine adjust replaced gobo (Service -> Calibration -> Calibrate effects -> R. Gobo
Index 1 ...R. Gobo Index 7).
Note. The magnet (9) of the gobo holder has the same function as the position point (4) on the rest of gobo
holders.
7
4.4 Installing the top hat
Disconnect the fixture from mains before installing the top hat.
1. Disconnect the fixture from mains.
2. Remove the original gel frame adaptor P/N 10980440 (1) from the fixture head (2) by unscrewing six screws
M4x10 (3)
3. Screw the new gel frame adaptor P/N 10980474 (supplied with the top hat) by means of the six screws
M4x10 (3).
4. Insert the top hat to the gel frame adaptor and secure it by a spring lock (4).
Note: the gel frame adaptor P/N 10980474 serves for the top hat only.
If you need to insert the gel frame (P/N 10980443) to the frame adaptor, you should screw the original gel frame
adaptor P/N 10980440.
8
4.5 Rigging the fixture
A structure intended for installation of the fixture(s) must safely hold weight of the fixture(s) placed on it. The
structure has to be certificated to the purpose.
The fixture (fixtures) must be installed in accordance with national and local electrical and construction codes
and regulations.
For overhead installation, the fixture must be always secured with a safety wire
that can bear at least 10 times the weight of the fixture
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety relating and machine technical installations are approved by an expert before taking into operation for the first time and after changes before taking into operation another time.
The operator has to make sure that safety relating and machine technical installations are approved by a skilled
person once a year.
Allow the fixture to cool for ten minutes before handling.
The projector should be installed outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working
load limits, installation material being used, and periodic safety inspection of all installation material and the
projector. If you lack these qualifications, do not attempt the installation yourself, but use a help of professional
companies.
CAUTION: Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety
of a possible installation, do not install the fixture!
The fixture has to be installed out of the reach of public.
The fixture must never be fixed swinging freely in the room.
.
Danger of fire !
When installing the device, make sure there is no highly inflammable
material (decoration articles, etc.) in a distance of min. 0.5 m.
CAUTION!
Use 2 appropriate clamps to rig the fixture on the truss.
Follow the instructions mentioned at the bottom of the base.
Make sure that the device is fixed properly! Ensure that the
structure (truss) to which you are attaching the fixtures is secure.
The fixture can be placed directly on the stage floor or rigged in any orientation on a truss without altering its
operation characte­ristics .
For securing the fixture to the truss, install a safety wire which can hold at least 10 times the weight of the fixture.
Use only the safety wire with a snap hook with screw lock gate.
9
Truss installation
1.Bolt clamps (4) to the brackets Omega CL (1) with M12 bolts and lock nuts through the hole in the bracket
Omega CL.
2.Fasten the brackets Omega CL on the bottom of the base by means of the quick-lock fasteners (2) and tighten
them fully clockwise.
3. Fasten the safety cable in the attachment point (5) and around the truss (6) in a suitable position so that
the maximum fall of the fixture will be 20 cm. .
1-Mounting bracket Omega CL
2-Quick-lock fasteners
3-Safety wire
4-Clamps
5-Attachment point
6-Truss
When installing fixtures side-by-side,
avoid illuminating one fixture with another!
DANGER TO LIFE!
Before taking into operation for the first time,the installation has to be approved by
an expert!
10
4.6 DMX-512 connection
The fixture is equipped with both 3-pin and 5-pin XLR sockets for DMX input and output.The sockets are wired
in parallel.
Only use a shielded twisted-pair cable designed for RS-485 and 3-pin or 5-pin XLR-plugs and connectors in
order to connect the controller with the fixture or one fixture with another.
DMX outputDMX input
XLR mounting sockets (rear view):
1 - Shield
2 - Signal (-)
3 - Signal (+)
4 - Not connected
5 - Not connected
XLR mounting plugs (rear view):
1 - Shield
2 - Signal (-)
3 - Signal (+)
4 - Not connected
5 - Not connected
If you are using the standard DMX controllers, you can connect the DMX output of the controller directly with
the DMX input of the first fixture in the DMX chain. If you wish to connect DMX controllers with other XLR outputs, you need to use adapter cables.
Building a serial DMX-chain:
Connect the DMX-output of the first fixture in the DMX chain with the DMX-input of the next fixture. Always connect
one output with the input of the next fixture until all fixtures are connected. Up to 32 fixtures can be conected.
Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 Ω resistor
between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX output of the last fixture.
11
4.7 Ethernet connection
The fixtures on a data link are connected to the Ethernet with ArtNet communication protocol.The control software running on your PC (or light console) has to support Art-Net protocol.
Art-Net communication protocol is a 10 Base T Ethernet protocol based on the TCP/IP.Its purpose is to allow
transfer of large amounts of DMX 512 data over a wide area using standard network technology.
IP address is the Internet protocol address.The IP uniquely identifies any node (fixture) on a network.
The Universe is a single DMX 512 frame of 512 channels.
The Robin T1 Profile is equipped with 8-pin RJ- 45 socket for Ethernet input.Use a network cable category 5
(with four “twisted” wire pairs) and standard RJ-45 plugs in order to connect the fixture to the network.
RJ-45 socket (front view):
RJ-45 plug (front view):
1- TD+ 5- Not connected
2- TD-6- RX
3- RX+
7- Not connected
4- Not connected
8- Not connected
Patch cables that connect fixtures to the hubs or LAN sockets are wired 1:1,that is,pins with the same numbers
are connected together:
1-1
2-2
3-3
4-4
5-5
6-6
7-7
8-8
If only the fixture and the computer are to be interconnected,no hubs or other active components are needed.A
cross-cable has to be used:
1-3
2-6
3-1
4-8
5-7
6-2
7-5
8-4
If the fixture is connected with active Ethernet socket (e.g. switch) the network icon
will appear at the
bottom right corner of the screen:
Direct Ethernet operation
Connect the Ethernet inputs of all fixtures with the Ethernet network.
Option “ Artnet" (gMaI or gMA2 or sACN) has to be selected from “Ethernet Mode” menu at each fixture.
Set IP address (002.xxx.xxx.xxx / 010.xxx.xxx.xxx) and the Universe at each fixture.
(DMX address=144)
IP addres=002.168.002.004
Universe=1
(DMX address=48)
IP addres=002.168.002.003
Universe=1
(DMX address=1)
IP addres=002.168.002.002
Universe=1
An advised PC setting: IP address: 002.xxx.xxx.xxx / 010.xxx.xxx.xxx (Different from fixture IP addresses)
NET mask: 255.0.0.0
12
Ethernet / DMX operation
Option “ Artnet" (gMaI or gMA2 or sACN) has to be selected from “Ethernet Mode” menu at first fixture.
Option “Ethernet To DMX” has to be selected from the “Ethernet Mode” menu at the first fixture (connected to
the Ethernet) in the fixture chain, next fixtures have standard DMX setting.
Connect the Ethernet input of the first fixture in the data chain with the network. Connect the DMX output of this
fixture with the input of the next fixture until all fixtures are connected to the DMX chain.
Caution: At the last fixture, the DMX chain has to be terminated with a terminator. Solder a 120 Ω resistor
between Signal (–) and Signal (+) into a XLR-plug and connect it in the DMX-output of the last fixture.
Example:
DMX address=1
IP addres=002.168.002.002
Universe=0
DMX address=48
DMX address=1
DMX address=48
IP addres=002.168.002.003
Universe=1
13
DMX address=144
DMX address=144
4.8 Wireless DMX operation
The wireless version of the Robin T1 Profile is equipped with the Lumen Radio CRMX module and antenna
for receiving DMX signal. CRMX module operates on the 2.4 GHz band.
The item " Wireless " from the menu "DMX Input" allows you to activate receiving of wireless DMX (Personality--> DMX Input -->Wireless.). First two options from the "DMX Input" menu are stated in DMX chart as well
(channel Power/Special functions , range of 10-19 DMX). If DMX input option is changed by DMX command,
the change is permanently written into fixture´s memory.
DMX range of 10-19 switching fixture to the wired/wireless operation is active only during first 10 seconds after switching the fixture on.
After switching the fixture on, the fixture checks both modes of receiving DMX in the following order:
1. For the first five seconds, the fixture receives DMX signal from the wired input. If the Power/Special functions
channel is set at some DMX input option, the fixture will receive DMX value according to this option. If DMX input
option is set to the wired input , this option is saved and checking procedure is finished. If DMX input option is
not set, the fixture continues next 5 seconds in scanning wireless DMX signal-see point 2.
2. For the next 5 seconds the fixture receives wireless DMX signal and again detects if the Power/Special
functions channel is set at some DMX input option, if not, the fixture will take option which is set in the fixture
menu "DMX Input".
To link the fixture with DMX transmitter.
The fixture can be only linked with the transmitter by running the link procedure at DMX transmitter .
After linking , the level of DMX signal ( 0-100 %) is displayed in the menu item “Wireless State“ (Information
-->Wireless State).
To unlink the fixture from DMX transmitter.
The fixture can be unlinked from receiver via the menu item “ Unlink Wireless Adapter“ (Information--> Wireless
State --> Unlink Wireless Adapter).
Example of connection:
14
5. Remotely controllable functions
5.1 Colour influencing functions
Factory setting of menu functions (channels) which influence behaviour of colour channels is the following:
Function
Factory setting
Function
Factory setting
DMX mode
1
Uniformity
Off
Colour calibration mode
On
Colour mix control
0 DMX
Colour mixing mode
CMY
CTC
110 DMX (5600K)
Dimmer curve
Square law
CRI Selection
Standard (80)
Tungsten effect simulation Off
Green correction
Uncorrected
Chromatic white
Off
Shutter/Strobe
Open (32 DMX)
Light output stability
Off
Dimmer
Closed (0 DMX)
Colour calibration mode (menu tab "Personality")
The function switches on/off an internal control of colours. For a standard operation of the fixture the option
should be switched on. Option off has to be set during colour calibration of the fixture (in this mode some
functions e.g. Tungsten effect, Virtual colour wheel are disabled).
Colour mixing system (menu tab "Personality", DMX channel "Colour functions")
This item allows selection between RGB and CMY mode. In both 3-colour controlling modes (Mode 1,Mode 2)
all internal 5 colours are always utilized where possible.
Dimmer curve (menu tab "Personality", DMX channel "Colour functions")
The fixture allows you to select a linear dimmer curve or a square law curve.
Tungsten effect simulation (menu tab "Personality", DMX channel "Colour functions")
The function simulates behaviour of a halogen lamp during dimming at calibrated white colours 2700K - 4200K.
You can select from various lamp wattage simulation: 750W, 1000W, 1200W, 2000W, 2500W.
If the function Chromatic white is on, the Tungsten effect will influence also mixed colours.
Saving user colours (DMX channel "Colour functions")
To save user colours:
1.Set the function White Point to off (Channel Colour Mix Control, range 70-79 DMX).
1.Mix desired colour on colour channels.
2.Stay in desired position of user colours (216-235 DMX) on the Virtual colour wheel for 1 sec.
3.Leave the range of user colours (216-235 DMX) on the Virtual colour wheel.
4. Repeat steps 2-4 for next user colour.
5.To permanently save user colours, stay for 3 sec. at DMX range of 110-114 on the channel Colour functions.
After that the colour system will be reset (this action can last about 2 minutes). Previous user colours will be
overwritten.
Chromatic white (menu tab "Personality", DMX channel "Colour functions")
If the function is on, the CTC channel influences calibrated white colours and mixed colours (also colours on
Virtual colour wheel).
If the function is off, the CTC channel influences calibrated whites only.
Light output stability (menu tab "Personality", DMX channel "Colour functions")
If the function is on, the light output from the fixture is immediately reduced to a value corresponding to a thermal
drop of the light intensity from the LED engine (the thermal drop of light intensity - decreasing of the light intensity
on circa 90 % of starting level after first 5 minutes, then is the thermal drop of light intensity inconsiderable).
Output Uniformity (menu tab "Personality", DMX channel "Colour functions")
If the function is on, the light intensity from the fixture is corrected in order to get approximately the same light
intensity as from another fixture which has also the function on. Light outputs from more fixtures will have
approximately the same light intensity. Thanks to the function, light outputs from more fixtures will have approximately the same light intensity.
15
Colour Mix control (DMX channel "Colour Mix control")
The Colour Mix control channel defines relation between colour channels (Cyan, Magenta, Yellow, Red, Green,
Blue, Amber, Light Green and CTC ) and the colours on the virtual colour wheel:
DMX value
Function
0 - 9
Virtual colour wheel has priority over colour channels (default setting)
10-19
Maximum mode (highest values have priority)
20-29
Minimum mode (lowest values have priority)
30-39
Multiply mode (multiply virtual colour wheel and colour channels)
40-49
Addition mode (virtual colour wheel + colour channels)
50-59
Subtraction mode (virtual colour wheel – colour channels)
60-69
Inverted Subtraction mode (virtual colour wheel – colour channels)
70-79
White Point Off (CTC+green correction+virtual col. wheel deactivated)
80-128Reserved
129
Crossfade Virtual colour wheel only
130-254
Crossfade between virtual colour wheel and colour channels
255
Crossfade colour channels only
CTC (DMX channel " Colour temperature correction")
The CTC channel allows you to change a colour temperature of calibrated white colours in range of 8000K-2700K
and also can influence mixed colours including colours on the Virtual colour wheel.
For correct function of the CTC channel on calibrated white colours, the following conditions have to be kept:
1.The Colour calibration mode has to be set on.
If the Chromatic white is set off, the CTC channel influences white colours only.
If the Chromatic white is set on, the CTC channel influences white colours and mixed colours including
colours on the Virtual colour wheel.
2. The following channels have to be set at:
Virtual colour wheel at 0 DMX
Green correction at 128 DMX
Colour mix control channel at 0 DMX
3. Colour channels have to be set depending on the colour mixing mode and the DMX mode.
CMY colour mixing mode.
DMX mode 1:
Channels Cyan/Red, Magenta/Green and Yellow/Blue (both 8-bit and 16-bit channels for each colour) have to
be set at 0 DMX or at the same DMX value (except 255 DMX).
DMX mode 2:
Channels Cyan/Red, Magenta/Green and Yellow/Blue have to be set at 0 DMX or at the same DMX value
(except 255 DMX) .
DMX mode 3:
The mode is not intended for CMY colour mixing mode.
RGB(A,LG) colour mixing mode
DMX mode 1:
Channels Cyan/Red, Magenta/Green and Yellow/Blue (both 8-bit and 16-bit channels for each colour) have to
be set at 255 DMX or at the same DMX value (except 0 DMX).
DMX mode 2:
Channels Cyan/Red, Magenta/Green and Yellow/Blue have to be set at 255 DMX or at the same DMX value
(except 0 DMX).
DMX mode 3:
Channels Red, Green, Blue, Amber, Light Green (both 8-bit and 16-bit channels for each colour) have to be set
at 255 DMX or at the same DMX value (except 0 DMX).
4. Shutter and dimmer have to be open.
CRI correction (DMX channel " CRI Selection")
The channel allows you to set CRI from Standard (80) to High (90+). Default setting is to 0 DMX (Standard CRI).
16
Green correction (DMX channel "Green correction ")
The channel allows you a fine correction of colours (whites, mixed colours, colours on the Virtual colour wheel).
E.g. white colour from red to green tint.
Virtual colour wheel (DMX channel " Virtual colour wheel")
The virtual colour contains 67 preset colours,10 user colours and 70 multicolours. The multicolours are intended
to use with the following effects only:
Effect wheel (DMX range: 20-255)
Effect wheel animation (DMX range: 8-27)
Rotating gobo wheel (DMX range: 4-199; 202-255)
Prism (DMX range: 20-255)
At least one othe effects stated above has to be inserted into the light beam.
There is several examples of using multicolours with prism/gobo combination:
Dimmer/Shutter (DMX channels " Shutter/Strobe" and "Dimmer Intensity")
Smooth 0 - 100 % dimming is provided by the electronic control unit of the light source. The control of the light
source also allows strobe effects with variable speed.
17
5.2 Effect functions
Effect wheel
The wheel rotates in both directions with variable speed which creates wide spectrum of graphic effects.
Gobo wheel
The fixture includes rotating gobo wheel with 7 glass gobos rotating in both directions, indexable, replaceable
"SLOT&LOCK” system.
Prism
The 6-facet prism rotates in both directions at different speeds, 16 prism/gobo macros are available.
Frost
Two frost filters (light 0.5°and medium 10°) provide variable frost for fine frosting. The medium frost is replaceable.
Iris
Motorized adjustable iris, wide range of variable pulse effects.
Zoom
Motorized zoom unit enables zoom between 7 °- 49°.
Focus
Motorized focus allows to focus beam from approx. 2 meters to infinity.
Framing system
Framing system consists of four framing shutters. There is individual control of each shutter blade position
and angle, together with rotation of the complete framing module. As well as providing a sharp precise or soft
frame for the projected image.
Framing system orientation:
18
Pan/Tilt
Fast pan/tilt movement due to built-in electronic motion stabilizer (EMS). The electronic motion stabilizer ensures
precise position of the fixture´s head during its movement and reduces its swinging when the truss shakes.
Pan /Tilt movement range: 0-540°/0-280°.
19
6. Control menu map
Default settings=Bold print
Tab
Level 1
Level 2
Level 3
Addressing
Settings
DMX Address
001-512
DMX Presets
Mode 1
Level 4
Mode 2
Mode 3
View Selected Preset
Ethernet Settings
Ethernet Mode
Disable
ArtNet
gMAI
gMA2
sACN
Ethernet To DMX
Off, On
IP Address/Net Mask
Default IP Address
Custom IP Address
Net Mask
Information
Fixture Times
ArtNet Universe
0-255
MANet settings
MANetI/II Universe
01-256
MANet Session ID
01-32
sACN Settings
sACN Universe
00001-32000
Power On Time
Total Hours
Resetable Hours
LEDs On Time
Total Hours
Resetable Hours
Air Filters
Fixture Temperatures
LEDs Temperatures
LEDs Brd. 1 Temperature
Elapsed Time
Alert Period
10-300
Cur.
RA, GY, B
Max.
RA, GY, B
Max.Res.
RA, GY, B
Current
Maximum NonRes.
Maximum Res.
LEDs Brd. 2 Temperature
Current
Maximum NonRes.
Maximum Res.
Base Temperature
Current
Maximum NonRes.
Maximum Res.
DMX Values
Pan
:
Dimmer Fine
Wireless State
Signal Quality
Unlink
Wireless Adapter
Power Channel state
Colour functions state
Software Versions
Display System
Module M
Module L-A
Module L-B
Module L-C
Module O
20
Level 5
Level 6
Tab
Level 1
Level 2
Level 3
Level 4
Module F-A
Module F-B
Module G
Module FR
Product IDs
Mac Address
RDM UID
RDM Label
View Logs
Fixture Errors
Fixture States
Power On
Power Off
Fixture Position
Fixture Temperatures
LEDs B.1 Temperature
LEDs B.2 Temperature
Base Temperatures
Personality
User Mode
User A Settings
User B Settings
DMX Presets
Mode 1
Mode 2
Mode 3
View Selected Preset
DMX Input
Wired
Wireless
Wireless In/XLR Out
Pan/Tilt Settings
Pan Reverse
Off, On
Tilt Reverse
Off, On
Pan/Tilt Feedback
Off, On
Pan/Tilt mode
Time
Speed
Pan/Tilt EMS
On, Off
Microphone Sensitivity
1-10-20
Blackout Settings
Blackout During M.C.
Off, On
Blackout while:
Pan/Tilt moving
Off, On
Gobo Wheel Moving
Off, On
Quiet Mode
Off
Quiet
Colour Calibration
Mode
On, Off
Colour Mixing Mode
CMY, RGB
Chromatic White
Off, On
Light Output Stability
On, Off
Output Uniformity
On, Off
Frequency Setup
300 Hz
0-100%
600Hz
1200Hz
2400Hz
Frequency Adjust
User Colours
View User Colours
View User Colour 1..
View User Colour 10
Distribute User Colours
Thungsten Eff. Sim.
Off
750W
1000W
1200W
2000W
25000W
Init Effect Positions
Pan
0-255
21
Level 5
Level 6
Tab
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
0-255
:
Screen Settings
Dimmer Fine
0-255
Display Intensity
1-10
Screen Saver Delay
Off-10min.
Touchscreen Lock
Off-10min.
Recalibrate Touchscreen
Display Orientation
Normal
Inverted
Auto
Temperature Unit
°C,°F
Fan Mode
Auto
High
Dimmer Curve
Linear
Square law
Date & Time Settings
Default Settings
Password Protection
Off, On
Reset Web Password
Manual Control
Reset Functions
Total System Reset
Pan/Tilt reset
Gobo/Eff. Wh. Reset
Optics/Prism/Frost Res.
Iris/framing Sh. Reset
Manual Effect Control
Pan
0-255
:
Dimmer Fine
Stand -Alone
Test Sequences
0-255
Dynamic Mode
Static Mode
Pan
0-255
Tilt
0-255
Zoom
0-255
Focus
0-255
Edit Program 1
Start Step
1-80
Edit Program 2
End Step
1-80
Edit Program 3
Edit Program Steps
Step 1
Pan
:
:
:
Dimmer Fine
0-255
:
Step Time
0-25,5 sec.
Step 100
Pan
0-255
MusicTrigger
Off, On
Preset Playback
None
Test
Prog. 1
Prog. 2
Prog. 3
Play Program
Play Program 1
Play Program 2
Play Program 3
Edit Program
:
22
Dimmer Fine
0-255
Step Time
0-25,5 sec.
Tab
Level 1
Level 2
Level 3
Service
Adjust DMX Values
Pan
0-255
Level 4
:
Calibrations
Dimmer Fine
0-255
Calibrate Effects
Pan
0-255
Tilt
0-255
Effect Wheel
0-255
Rot. Gobo Wheel
0-255
R. Gobo Index 1
0-255
:
Calibrate Fr. Hysteresis
Calibrate colours
Green Corrections
R. Gobo Index 7
0-255
Prism 1
0-255
Prism 2
0-255
Zoom
0-255
Focus
0-255
Iris
0-255
Frost 1/1
0-255
Frost 1/2
0-255
Frost 2/1
0-255
Frost 2/2
0-255
Fr. Shutters rot.
0-255
Fr. Shutter 1 Move
0-255
Fr. Shutter 1 Swiv
0-255
Fr. Shutter 2 Move
0-255
Fr. Shutter 2 Swiv
0-255
Fr. Shutter 3 Move
0-255
Fr. Shutter 3 Swiv
0-255
Fr. Shutter 4 Move
0-255
Fr. Shutter 4 Swiv
0-255
Framing Lamella 1
0-8
Framing Lamella 2
0-8
Framing Lamella 3
0-8
Framing Lamella 4
0-8
Red Calibration
0-255
Green Calibration
0-255
Blue Calibration
0-255
Amber Calibration
0-255
Light GreenCalibration
0-255
110-145
Calibrate Pan/Tilt EMS
Load Default Calibrations
LEDs HW Version
Update Software
23
Level 5
Level 6
7. Control menu
The Robin T1 Profile is equipped with the QVGA Robe touch screen with battery backup which
allows you to set the fixture´s behaviour according to your needs, obtain information on its operation, control
all range of effects and program it in stand-alone mode.
The fixture´s menu can be controlled either by the control buttons or directly by touching the icon.
Control buttons on the front panel:
[ESCAPE] button used to leave the menu without saving changes.
[NEXT] , [PREV] buttons for moving between menu items and symbols, adjusting values.
[ENTER/Display On] button used to enter the selected menu (menu item) and to confirm adjusted value.
If the fixture is disconnected from mains, the button switches the touch screen on.
Icons used in the touch screen menu:
- [back arrow] used to move back to the previous screen (menu).
- [up arrow] used to move up on the previous page.
- [down arrow] used to move down on the next page.
- [confirm] used to save adjusted values, to leave menu or to perform desired action.
- [cancel] used to leave menu item without saving changes.
- [confirm+copy] used to save adjusted values and copy them to the next prog. step.
- [warning icon] used to indicate some error which has occurred in the fixture.
- [Ethernet] used to indicate Ethernet connected.
- [menu rotation] used to rotate menu 180 degrees from current orientation.
- [slider control] used to recall slider system for setting desired value.
- [keyboard control] used to recall keyboard system for setting desired value.
- [air filters cleaning] used to signal that cleaning period of the air filters elapsed.
The menu page displays icons for each function that you can perform from the touch screen.
After switching the fixture on, the touch screen shows the screen with the ROBE logo:
24
Touch any part of the screen or press the [ENTER/Display On] button to display the initial screen with the current stored DMX address:
Note: The green icon at the top right corner of the screen indicates the level of the display battery charging. If
the whole icon is green, the battery is fully charged while the red icon indicates exhausted battery. The battery
charges during fixture operation, its charging lasts cca 6 hours.
We recommend that the fixture should be in operation at least 7 hours per week to keep the battery fully charged.
If you switch the fixture on and this screen will not appear till 1 minute, switch the fixture off and on again. If the
screen lights, the battery is exhausted. In case the screen still does not light, the battery is faulty.
This is also indicated by an error message "Faulty battery" and if such an error message appears the battery
should be replaced immediately. The lifetime of the battery is highly dependent on ambient temperature (and
consequently on base temperature). If the maximum ambient temperatures (as recorded and displayed in menu:
Information -> Fixture Temperatures -> Ambient Temperature -> Maximum NonRes.) are kept within the specified limits, the battery should last for at least two years. Shell the ambient temperatures exceed the specified
maximum temperature, the lifetime of the batteries could be considerably shortened even up to just one year
or less and also result in physical damage (battery leakage) or unreliable fixture functions.
Damage caused by batteries failed due to exceeded maximum ambient temperature cannot be claimed under
warranty terms.
Touch the green arrow at the bottom right corner of the screen or press the [ENTER/Display On] button to enter
the " Address" menu.
Each item (such as a Tab, menu item, text box, icon) may be selected from a screen by simply touching the
item in the list or by pressing the [NEXT] or [PREV] buttons to scroll through list items. With each press, the
next item is highlighted. Press [ENTER/Display On] to select the highlighted item.
Before first fixture operation, set current date and time in the menu "Date &Time
Setings" (menu path: Personality--> Date &Time Setings).
7.1 Tab " Address"
DMX Address - Select the menu to set the DMX start address.
DMX Preset - Use the menu to select desired channel mode.
DMX Preset - Use the menu to select desired channel mode.
Mode 1 - 49 control channels
Mode 2 - 33 control channels
Mode 3 - 53 control channels
View Selected Preset - Use the menu to display channels included in the selected mode.
Ethernet Settings - The menu allows all needed settings for the Ethernet operation
Ethernet Mode
Disable - The option disables Ethernet operation.
Artnet - Fixture receives Artnet protocol
gMAI - Fixture receives MANet I protocol
gMA2 - Fixture receives MANet 2 protocol
25
sACN - Fixture receives sACN protocol
Ethernet To DMX - Fixture receives protocol from the Ethernet input and sends DMX
data to its DMX output (fixture works as an "Ethernet/DMX converter", next fixture can
be connected to its DMX output and you can build a standard DMX chain by connecting another fixtures.
Only one fixture has to be connected to the Ethernet.
IP Address/Net Mask - Select this menu to set IP address. IP address is the Internet protocol
address.The IP uniquely identifies any node (fixture) on a network.
There cannot be 2 fixtures with the same IP address on the network!
Default IP Address -Preset IP address, you can set up only first byte of IP address
(2 or 10) e.g. 002.019.052.086.
Custom IP Address - The option enables to set up all bytes of IP address.
Net Mask - The option enables to set up all bytes of Net Mask.
ArtNet Universe - Use this item to set a Universe (0-255). The Universe is a single DMX
512 frame of 512 channels.
MANet Settings - Use this menu to set parameters for MANet operation.
MANet Universe I/II - The value of this item can be set in range 1-256.
MANet Session ID - The value of this item can be set in range 1-32.
sACN Settings - Use this menu to set parameters for sACN operation.
sACN Universe - The value of this item can be set in range 1-32000.
7.2 Tab "Information"
Fixture Times - The menu provides readouts of fixture and LED module operation hours.
Power On Time Hours - Select this menu to read the number of fixture operation hours.
Total Hours - The item shows the total number of the operation hours since the Robin T1 Profile has been fabricated.
Resetable Hours - The item shows the number of the operation hours that the Robin T1 Profile has been powered on since the counter was last reset.
In order to reset this counter to 0, touch the text box next to the item "Resetable Hours:"
LEDs On Time - Select this menu to read the number of LEDs operation hours.
In order to reset some counter to 0, touch the yellow text box next to desired colour.
Air Filters - Regular cleaning of the air filters is very important for the fixture´s life and performance.
Bild-up of dust, dirt and fog fluid residues reduces the fixture´s light output and cooling ability.
The two items of this menu help you to keep cleaning period of the air filters.
Alert period - Cleaning schedule for the fixture depends on the operating environment.
It is therefore impossible to specify accurate cleaning interval. This item allows
you to change the cleaning interval of the air filters. This "alert" value is 300 hours and it
is set as default. Inspect the fixture within its 300 hours of operation to see whether cleaning
is necessary. If cleaning is required, clean all air filters and change the value in this menu
on acceptable level. Min. level of alert period is 10 hours, max. is 300 hours.
Elapsed Time - The item allows you to read the time which remains to cleaning air filters.
The time period is set in the menu mentioned above.
Expired time period is signalled by a negative mark (-) at the time value and a warning icon
on the display.
Clean the filters and reset this menu item (by touching the text box next to the item
"Elapsed Time").
Fixture Temperatures - The menu is used to view temperatures of the fixture´s inside.
LEDs temperatures - The menu shows temperature on the LED PCBs in the light source (RA=red + amber
LEDs, GY=green + light green LEDs, B=blue LEDs).
Cur. - A current temperature of the LED PCBs.
Max. - A maximum temperature of the LED PCBs since the fixture has been fabricated.
26
Max. Res. - A maximum temperature of the LED PCBs since the counter
was last reset.
In order to reset some counter to 0, touch desired text box under item "Max.Res."
LEDs Brd.1 Temperature - The menu shows temperature on the LEDs control PCB (RB 3401-top side with
coils) in the fixture head.
Current - A current temperature on the LEDs control PCB.
Maximum NonRes. - A maximum temperature on the LEDs control PCB since
the fixture has been fabricated.
Maximum Res. - A maximum temperature on the LEDs control PCB since the counter
was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
LEDs Brd.2 Temperature - The menu shows temperature on the LEDs control PCB (RB 3401-bottom side)
in the fixture head.
Current - A current temperature on the LEDs control PCB.
Maximum NonRes. - A maximum temperature on the LEDs control PCB since
the fixture has been fabricated.
Maximum Res. - A maximum temperature on the LEDs control PCB since the counter
was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
Base Temperature - The menu shows temperature on the display PCB in the fixture base.
Current - A current temperature on the display PCB.
Maximum NonRes. - A maximum temperature on the display PCB since the fixture has
been fabricated.
Maximum Res. - A maximum temperature on the display PCB since the counter
was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
DMX Values - The menu items allows you to read DMX values of each channel received by the fixture.
Wireless State - The menu serves for reading of the wireless operation status.
Unlink Wireless Adapter - The item serves for unlinking the fixture from a DMX transmitter.
If the wireless module is not installed in the fixture, message" Wireless Module Not Installed" will appear.
Power Channel State - Select this item to see current setting of the functions, which can be set by menu items
in "Personality" as well as by DMX command at channel "Power/Special functions".
Colour Functions State - Select this item to see current setting of the colour functions, which can be set by
menu items in "Personality" as well as by DMX command at channel "Colour functions".
Software Version - Select this item to read the software version of the fixture processors:
Display System - A display processor on the display board in the fixture base
Module M - Pan/Tilt processor
Module L-A - LEDs control processor
Module L-B - LEDs control processor
Module L-C - LEDs control processor
Module O - Focus/Zoom/Prism/ control processor
Module F-A -Framming shutters control processor
Module F-B - Framming shutters + Iris control processor
Module G - Rot. gobo/Effect wheel control processor
Module P - Prism rotation/Frost control processor
Product IDs - The menu is used to read the MAC Address ,RDM UID and RDM Label.
View Logs - Use this menu to read fixture´s data which have been recorded during fixture operation. This
colected data allows easier troubleshooting.
Fixture Errors - Use this menu to read fixture errors which have occured during fixture operation.
Fixture States - In the menu are recorded fixture states as power on and power off.
27
Fixture Positions - In the menu are recorded installation positions of the fixture:
Fixture Temperatures - In the menu are recorded temperatures which have exceeded defined levels.
Note: The log buffer can contain max. 8000 records. If the buffer is full, old data will be overwritten.
7.3 Tab "Personality"
User mode - The Robin T1 Profile allows you to recall two user settings. After switching the fixture on for the
first time, the User A settings is active. Now all changes made in the “Personality” menu , ”Addressing” menu
and the “Music Trigger“ and “ Preset Playback“ items from the “Stand-alone” menu are saved to the User A
settings. If you now select the User B settings, from this moment the changes made in these menus will be
saved to the User B settings. After switching the fixture off and on, the User B setting is active. In this way you
may use the two fixture operating behaviours.
User A Settings - the function recalls the user A settings.
User B Settings - the function recalls the user B settings.
DMX Preset - Use the menu to select desired channel mode.
Mode 1 - 49 control channels
Mode 2 - 33 control channels
Mode 3 - 53 control channels
View Selected Preset - Use the menu to display channels included in the selected mode.
DMX Input- Use the menu to select mode of DMX signal receiving.
Wired - DMX signal is received by means of the standard DMX cable.
Wireless - DMX signal is received by means of the inbuilt wireless module.
Wireless In/XLR Out- the fixture receives wireless DMX and sends the signal to its wired DMX output.
The fixture behaves as " Wireless/Wired" adapter.
The options "Wired" and "Wireless" are also stated in DMX chart (channel Power/Special functions).
Note. If the wireless module is not installed in the fixture, the following message will appear:
DMX Input Set to Wired
Wireless Module Missing
If the fixture is not connected to mains, the message "Not Available In Off line Mode" will appear after entering
the menu DMX Input. To enter this menu, the fixture has to be connected to mains.
Pan/Tilt Settings - Use the menu set behaviour of both pan and tilt movements.
Pan Reverse - The item allows to invert pan movement.
Tilt Reverse - The item allows to invert tilt movement.
Pan/Tilt Feedback - The item allows to return the mowing head to the required pan/tilt position after
changing the position by an external force if this option is set on.
Note. Be careful, the Pan/Tilt Feedback should be permanent On, the option Off is not suitable for standard
operation and the head of the fixture can be damaged!
Pan/Tilt mode - Use this menu to set the mode of the pan/tilt movement
Time mode – The pan and tilt will move with different speeds and they will come at
the same time to the end point of their tracks (pan and tilt use their optimal speeds).
Time of the pan/tilt movement (25.5 sec. max.) is set by the channel "Pan/Tilt speed, Pan/Tilt
time".
Speed Mode - Both Pan and tilt will move with the same speed as adjusted at the channel
"Pan/Tilt speed, Pan/Tilt time".
Pan/Tilt EMS - Built-in electronic motion stabilizer ensures precise position of the fixture´s head during its
movement and also reducing its swinging when the truss shakes.
28
Microphone Sensitivity - Enter the menu if you want to adjust the microphone sensitivity from 1 (max.) to 20
(min.).
Blackout Settings - Use the menu if you need to close the light output under certain conditions which are
described below
Blackout During MC - Blackout during movement correction. Set this option On if you wish to close light
output during the time when the head goes to its correct position from which has been changed by an
external force.
Active Blackouts - Use this menu if you wish to close the light output during effect changes.
Pan/Tilt Moving - The menu item enables to close light output while the pan/tilt DMX values
are changing.
Gobo Wheel Moving - The menu item enables to close light output while the rot. gobo
carousel is moving.
Quiet Mode - The mode reduces noise of the fixture due to adjustment of the fans speed.
Off - The option is disabled
Quiet - After selecting this item, the option "Fan Noise Level" is accessible where desired level of fans
noise (speed) can be set .
Note: The light output of the fixture may be reduced at low speed of fans.
Colour Calibration Mode - the function switches on/off an internal control of colours. For a standard operation
of the fixture the option should be switched on. Option off has to be set during colour calibration of the fixture.
Colour Mixing Mode - This item allows selection between RGB and CMY mode. In both 3-colour controlling
modes (Mode 1,Mode 2) all internal 5 colours are always utilized where possible
Chromatic White - If this function is on, the CTC channel influences colours and calibrated white colours.
If this function is off, the CTC channel influences calibrated whites only.
Light Output Stability - If the function is on, the light output from the fixture is immediately reduced to a value
corresponding to a thermal drop of the light intensity from the LED engine (the thermal drop - decreasing of the
light intensity on 87 % of a starting level after first 5 minutes, then is the thermal drop inconsiderable).
Output Uniformity - if the function is on, the light intensity from the fixture is corrected in order to get approximately the same light intensity as from another fixture which has also the function on. Thanks to the function,
light outputs from more fixtures will have approximately the same light intensity.
Frequency Setup - The function allows you to set the PWM (Pulse Width Modulation) output frequency of
LEDs to 300Hz, 600Hz, 1200Hz or 2400Hz.
Frequency Adjust - The menu item allows you fine adjustment of the LED frequency around selected frequency.
User Colours - Use this menu to change the touch screen settings.
View User Colours - The item allows you to read DMX values of colour channels for each user colour (1-10).
Distribute User Colour - The item allows you to "send" user colours from this fixture to all
connected Robin T1 Profile fixtures by means of RDM protocol. User colours in the fixtures will be overwritten.
Tungsten effect simulation - This function simulates behaviour of a halogen lamp during dimming at calibrated
whites 2700K-4200K. You can select from various lamp wattage simulation: 750W, 1000W, 1200W, 2000W,
2500W.
Init Effect Positions - Use the menu to set all effects to the desired positions at which they will stay after
switching the fixture on without DMX signal received.
Screen Settings - Use this menu to change the touch screen settings.
Display Intensity - The item allows to control the intensity of the screen (1-min., 10-max.).
Screen saver Delay - The item allows you to keep the screen on or to turn it off automatically after 1-10
minutes after last touch (or pressing any button on the control panel).
Touchscreen Lock - The item allows you to lock the screen after last touch (or pressing any button on the
control panel). The time delay can be set in range of 1-10 minutes.To unlock the screen, press the
[ENTER/Display On] button.
Recalibrate Touchscreen - The item starts calibration of the touch screen. Follow the instructions on
the screen.
Display Orientation - The menu allows to change display orientation.
Normal - Standard display orientation if the fixture is placed horizontally (e.g. on the ground).
Inverted - Inverted orientation (needed if the fixture is hanging on the truss).
29
Auto - The option activates a gravitation sensor for automatic screen orientation.
Note: Auto option is set as default. You change the display orientation by touching the icon
an the option set in the "Display Orientation" menu is temporarily overriden.
on the display,
Temperature unit - Use the menu item to change temperature unit from °C to °F.
Fan Mode - Use the menu to set the fixture fans to max. power mode ("High") or to the auto-control mode
("Auto").
Dimmer Curve - Use the menu to select desired dimmer curve: Linear or Square Law.
Date & Time Settings - Use this menu to set current date and time for the fixture log system (menu "View
Logs"). Set this menu items before first fixture operation.
Default Settings - The menu item allows to set all fixture parameters in this menu to the default (factory) values
except items "DMX Input".
Password Protection - allows to enter password in order to prevent unauthorized person from changing setting
of the fixture.
Reset Web Password - The menu item allows you to reset a password for access on the Web server (default
password: 2479, user: robe).
7.4 Tab "Manual Control"
Reset Functions - The menu allows to reset the fixture either per function modules or all modules together.
Total System Reset - The item resets all function modules.
Pan/Tilt Reset - The item resets a pan and a tilt.
Gobo/Eff. Wh. Reset - The item resets static and rotating gobo wheel and an effect wheel.
Optics/Prism/Frost Res. - The item resets a zoom, focus, prism and a frost module.
Iris/Framing Sh. Reset - The item resets an iris module and framing shutters.
Manual Effect control - Use the menu to control all fixture channels by means of the control panel.
7.5 Tab "Stand-alone"
Test Sequences -Use the menu to run a test/demo sequences without an external controller, which will show
you some possibilities of using Robin T1 Profile.
Dynamic Mode - This mode uses all Robin T1 Profile functions including pan/tilt movement and therefore
is good for a complete introduction of the fixture.
Static Mode - This mode is suitable for projections on the wall, ceiling or ground without any pan/tilt movement.
Adjust the pan, tilt, zoom and focus to desired positions an start test sequences by touching the green icon.
Music Trigger - Use the item to activate the sound control of the running program via the built-in microphone.
Preset Playback - This menu allows you to select the program which will be played in a loop after switching
the fixture on (the option is commonly used in a stand-alone operation without an external controller).
None - The option disables “Presetting playback” function.
Test - The option starts the test sequences.
Prog. 1 - The option starts user program No. 1.
Prog. 2 - The option starts user program No. 2.
Prog. 3 - The option starts user program No. 3.
Play program - Use the menu to run desired program in a loop.
30
Play Program 1 - The option starts user program No.1.
Play Program 2 - The option starts user program No. 2.
Play Program 3 - The option starts user program No. 3.
Edit Program - Use the menu to create or to edit desired program. The Robin T1 Profile offers 3 free programs,
each up to 80 steps.
Edit Program 1 - The option allows to edit user program No.1.
Edit Program 2 - The option allows to edit user program No.2.
Edit Program 3 - The option allows to edit user program No.3
To edit program:
1. Touch the item which you want to edit (“Edit Program 1” - “Edit Program 3”).
2. Touch the item "Edit Program Steps".
3. Touch the item "Step 1".
4 From the list of effects touch desired effect and set its value. Browse throw the list by touching the [up arrow]
and [down arrow] and set all desired effects.
An item "Step Time" (value of 0-25.5 sec.) is the time during which effects last in the current step
5. Save adjusted effects to the current step by touching the [confirm] or save and copy them to the following
step by touching the [confirm+copy]. By touching the text box "Preview" next to the current program step you
can view created scene.
6. Repeat the steps 4 and 5 for next program steps.
7. After editing desired program steps, adjust the length of the program by touching the text boxes "Start Step"
and "End Step".
Meaning of the icons used in the "Edit Program" menu:
- moves down on the next page
- saves adjusted values and leaves menu
- moves up on the previous page
- saves values to the current step and copy them to the
following prog. step
- leaves menu without saving values
7.6 Tab "Service"
Adjust DMX Values - The menu allows you to set all effects to desired positions before fine calibration of the
effects .
Calibrations - This menu enables fine calibration of fixture effects and download default calibration values.
Calibrate Effects - The menu allows the fine adjustment of effects.
Pan- a pan position fine adjustment (value range: 0-255)
Tilt - a tilt position fine adjustment (value range: 0-255)
Effect Wheel - an effect wheel position fine adjustment (value range: 0-255)
Rot. Gobo Wheel - a carousel of rotating gobos fine movement (value range: 0-255)
R. Gobo Index 1 - a fine movement of the rotating gobo 1 (value range: 0-255)
R. Gobo Index 2 - a fine movement of the rotating gobo 2 (value range: 0-255)
R. Gobo Index 3 - a fine movement of the rotating gobo 3 (value range: 0-255)
R. Gobo Index 4 - a fine movement of the rotating gobo 4 (value range: 0-255)
R. Gobo Index 5 - a fine movement of the rotating gobo 5 (value range: 0-255)
R. Gobo Index 6 - a fine movement of the rotating gobo 6 (value range: 0-255)
R. Gobo Index 7 - a fine movement of the rotating gobo 7 (value range: 0-255)
Prism 1 - a prism fine movement (value range: 0-255)
Prism 2 - a prism fine rotation (value range: 0-255)
Zoom - a zoom module fine movement (value range: 0-255)
Focus - a focus module fine movement (value range: 0-255)
Iris - an iris fine movement (value range: 0-255)
Frost 1/1 - a light frost fine position movement 1
Frost 1/2 - a light frost fine position movement 2
Frost 2/1 - a medium frost fine position movement 1
Frost 2/2 - a medium frost fine position movement 2
Fr. Shutters.rot- a framing shutters module fine rotation (value range: 0-255)
Fr. Shutter 1 Move - a Fram. lamella 1 fine moving
Fr. Shutter 1 Swiv. - a Fram. lamella 1 fine swivelling
Fr. Shutter 2 Move - a Fram. lamella 2 fine moving
31
Fr. Shutter 2 Swiv.- a Fram. lamella 2 fine swivelling
Fr. Shutter 3 Move - a Fram. lamella 3 fine moving
Fr. Shutter 3 Swiv. - a Fram. lamella 3 fine swivelling
Fr. Shutter 4 Move - a Fram. lamella 4 fine moving
Fr. Shutter 4 Swiv. - a Fram. lamella 4 fine swivelling
Calibration of the effects via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find "Pan" and touch it to enter the fine effect adjustment screen.
3. Set desired value and save it by touching the [confirm].
4. Repeat steps 2 and 3 for next item
5. After calibrating all effects, touch the [confirm] to save all adjusted values and reset the fixture.
Calibration of the effects via the DMX controller
1. Connect DMX controller to the fixture and enter the "Calibrate Effects" menu.
Calibration protocol:
Effect
Mode 1
Mode 2
Mode 3
Panchannel 50channel 34channel 54
Tilt channel 51
channel 35
channel 55
Ef. wheel
channel 52
channel 36
channel 56
Rot. Gobo Wheel
channel 53
channel 37
channel 57
R. Gobo Index 1
channel 54
channel 38
channel 58
R. Gobo Index 2
channel 55
channel 39
channel 59
R. Gobo Index 3
channel 56
channel 40
channel 60
R. Gobo Index 4
channel 57
channel 41
channel 61
R. Gobo Index 5
channel 58
channel 42
channel 62
R. Gobo Index 6
channel 59
channel 43
channel 63
R. Gobo Index 7
channel 60
channel 44
channel 64
Prism 1
channel 61
channel 45
channel 65
Prism 2
channel 62
channel 46
channel 66
Zoomchannel 63channel 47channel 67
Focus
channel 64
channel 48
channel 68
Irischannel 65channel 49channel 69
Frost 1/1
channel 66
channel 50
channel 70
Frost 1/2
channel 67
channel 51
channel 71
Frost 2/1
channel 68
channel 52
channel 72
Frost 2/2
channel 69
channel 53
channel 73
Fr. Shutters rot.
channel 70
channel 54
channel 74
Fr. Shutter 1 Move
channel 71
channel 55
channel 75
Fr. Shutter 1 swiveling. channel 72
channel 56
channel 76
Fr. Shutter 2 Move
channel 73
channel 57
channel 77
Fr. Shutter 2 swiveling channel 74
channel 58
channel 78
Fr. Shutter 3 Move
channel 75
channel 59
channel 79
Fr. Shutter 3 swiveling channel 76
channel 60
channel 80
Fr. Shutter 4 Move
channel 77
channel 61
channel 81
Fr. Shutter 4 swiveling channel 78
channel 62
channel 82
Calibrate Fr. Hysteresis
Framing Lamella 1 - a framing lamella 1 reverse movement (value range: 0-8)
Framing Lamella 2 - a framing lamella 1 reverse movement (value range: 0-8)
Framing Lamella 3 - a framing lamella 1 reverse movement (value range: 0-8)
Framing Lamella 4 - a framing lamella 1 reverse movement (value range: 0-8)
The value set for every framing lamella gives a value at which the lamella reacts to its reverse
movement promptly (without movement hysteresis).
Calibrate Colours - The menu serves for calibration of white colours in a factory.
Green Corrections - The menu allows you to correct calibrated whites 2700K, 3200K, 4200K, 5600K and
8000K. Both shutter and dimmer have to be open during the correction.
Calibrate Pan/Tilt EMS - This menu item allows calibration of the pan/tilt electronic motion stabilizer.
Important: during this calibration any external force must not influence the fixture and the surface at which
the fixture stands (or truss if the fixture hangs) has to be without movement, shake, strokes etc.
32
Load Default Calibrations - The item loads default (factory) calibration values.
LEDS HW version - The item shows a hardware version of the LED engine.
Update software - The menu item allows you to update software in the fixture.
The following items are required in order to update software:
- PC running Windows or Linux or macOS
- DSU file
- Flash cable RS232/DMX, P/N13050624 (if you want to use a serial port of PC)
- Robe Universal Interface or Robe Universal interface WTX (if you want to use an USB port of PC)
After the software updating the fixture will be set to default values.
To update software in the fixture:
1. DSU file is available from Robe web site at WWW.robe.cz.
File with extension zip is intended for Windows (used and tested from XP to W10 on 32/64bit systems).
File with extension tbz is intended for Linux (used and tested on Debian and Ubuntu 32/64bit).
File with extension dmg is intended for macOS (used and tested on OSX up to Sierra) XQuartz required,
install it from https://www.xquartz.org/
Save the download file to a folder on your computer.
In case that you use windows, extract files in the zip file (e.g. DSU_RobinT1Profile_18100828.zip)
2. Disconnect the fixture from DMX controller.
3. If you use the flash cable RS232/DMX, connect a serial port of your computer with DMX input of the fixture
by means of the cable.
If you use the Robe Universal Interface, connect a USB port of your computer with the Robe Universal Interface
by means of the USB cable and DMX input of the fixture with the DMX output of the Robe Universal Interface
via a DMX cable.
4. Switch the fixture to the update mode (tab "Service" --> Update Software).
Note: If you do not want to continue in the software update, you have to switch off and on the fixture
to escape from the updating mode.
We recommend to cancel all running programs on your computer before starting the software update.
5. Double-click the software uploader file (e.g. DSU_RobinT1Profile_18100828.exe) in
the extracted files. The Software Uploader program will start running.
6. Select correct "COM " number if you use a Flash cable RS232/DMX or select "Robe Universal Interface "
if you use the Robe Universal Interface/Robe Universal Interface WTX and then click on the "Connect" button.
7. If the connection is OK, click the “Start Uploading" button to start software uploading. It will take several
minutes to perform software update.
If the option "Incremental Update" is not checked, all processors will be updated (including processors with
the same software version).
If you wish to update only processors with new version of software, check the “Incremental Update box“.
Avoid interrupting the process. Update status is being displayed in the "Info Box" window.
When the update is finished, the line with the text “Fixture is successfully updated“ will appear in
this window.
In case upload process is interrupted (e.g. power loss), the fixture stays in “Updating mode” and you will have
to repeat the software update again.
33
Another way, how to update software in the fixtures (especially large installation of fixtures) is to use the ROBE
Uploader. It is a software for automatized software update of Robe fixtures. It takes advantage of RDM
support).
For more information please see https://www.robe.cz/robe-uploader/.
8. RDM
This fixture supports RDM operation. RDM (Remote Device Management) is a bi-directional communications
protocol for use in DMX512 control systems, it is the new open standard for DMX512 device configuration and
status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without adversely affecting
existing non-RDM equipment. By using a special „Start Code,“ and by complying with the timing specifications
for DMX512, the RDM protocol allows a console or dedicated RDM controller to send commands to and receive
messages from specific moving lights.
RDM allows explicit commands to be sent to a device and responses to be received from it.
The list of commands for Robin T1 Profile is the following.
Parameter ID
Discovery command SET command
DISC_UNIQUE_BRANCH
*
DISC_MUTE
*
DISC_UN_MUTE
*
GET command
DEVICE_INFO
*
SUPPORTED_PARAMETERS
*
SOFTWARE_VERSION_LABEL
*
DMX_START_ADDRESS
*
*
IDENTIFY_DEVICE
*
*
DEVICE_MODEL_DESCRIPTION
*
MANUFACTURER_LABEL
*
*
DEVICE_LABEL
*
SENSOR_DEFINITION
*
SENSOR_VALUE
*
DISPLAY_INVERT
*
*
DISPLAY_LEVEL
*
*
PAN_INVERT
*
*
TILT_INVERT
*
*
DEVICE_RESET
*
DMX_PERSONALITY
*
*
DMX_PERSONALITY_DESCRIPTION
*
STATUS_MESSAGES
*
STATUS_ID_DESCRIPTION
*
RDM model ID for the Robin T1 Profile is 0x00f9.
34
9. Error and information messages
Information icons
- Air Filters Cleaning
This icon signalizes that cleaning period of the air filters has elapsed
and you have to clear air filters and reset the menu item "Elapsed Time".
Errors
Error in the fixture is signalled by the yellow warning icon at the bottom line of the screen:
Touch the warning icon or press the [ESCAPE] button to display error messages.
List of error and information messages:
Tilt Error 1 (Tilt Error 2)
This message will appear after the reset of the fixture if the head´s magnetic-indexing circuit malfunctions
(sensor failed or magnet is missing) or the stepping motor is defective or its driving IC on the PCB. The head
is not located in the default position after the reset.
Pan Error 1 (Pan Error 2)
This message will appear after the reset of the fixture if the yoke´s magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or the stepping motor is defective or its driving IC on the PCB. The yoke is not
located in the default position after the reset of the fixture.
Prism Error 1 (Prism Error 2 )
The messages will appear after the reset of the prism wheel if this wheel is not located in the default position.
Iris Error 1 (Iris Error 2 )
The messages will appear after the reset of the iris if the iris is not located in the default position.
Frost 1 Error 1 (Frost 1 Error 2 )
The messages will appear after the reset of the light frost module if this module is not located in the default
position.
Frost 2 Error 1 (Frost 2 Error 2 )
The messages will appear after the reset of the medium frost module if this module is not located in the default
position.
Zoom Error 1 (Zoom Error 2 )
The messages will appear after the reset of the zoom module if the zoom lens is not located in the default position.
Focus Error 1 (Focus Error 2 )
The messages will appear after the reset of the focus module if the focus lens is not located in the default.
Gobo Carousel Error 1 (Gobo Carousel Error 2 )
The messages will appear after the reset of the rotating gobo wheel if this wheel is not located in the default
position.
Gobo Rotation Error 1 (Gobo Rotation Error 2 )
The messages will appear after the reset of the rotating gobo wheel if the rotating gobos are not located in the
default positions.
Effect Wheel Error 1 (Effect Wheel Error 2 )
The messages will appear after the reset of the effect wheel if this wheel is not located in the default position
35
Fr. Shutters Rot. Error 1 (Fr. Shutters Rot. Error 2 )
The messages will appear after the reset of the framing shutters module if this module is not located in the
default position.
Fr. Shutter 1 Error 1 (Fr. Shutter 1 Error 2 )
The messages will appear after the reset of the framing shutters module if the frame 1 is not located in the
default position.
Fr. Shutter 2 Error 1 (Fr. Shutter 2 Error 2 )
The messages will appear after the reset of the framing shutters module if the frame 2 is not located in the
default position.
Fr. Shutter 3 Error 1 (Fr. Shutter 3 Error 2 )
The messages will appear after the reset of the framing shutters module if the frame 3 is not located in the
default position.
Fr. Shutter 4 Error 1 (Fr. Shutter 4 Error 2 )
The messages will appear after the reset of the framing shutters module if the frame 4 is not located in the
default position.
EEprom Error
Hardware error of the EEprom.
Recharge The battery
The battery on the display board needs to be charged. Let the fixture on for cca 6 hrs.
Battery Faulty. Replace it.
The battery on the display board is exhausted and should be replaced immediately.
Pan/Tilt EMS Cal. Error
The EMS system is not calibrated.
Pan/Tilt EMS Error
Control electronics cannot communicate with the EMS system.
Internal Error 1
Communication error between PCBs (error or noise was detected on communication wires)
Internal Error 2
Communication error (some PCB has failed or is disconnected (this PCB will show as N/A in menu --> Information --> Software versions) or error/noise was detected on communication wires)
Clean Air Filters
The message informs you that the item "Elapsed Time" in the "Fixture Information" menu is at 0 value. Clean
air filters and reset this counter.
Blue 1 Short Error/ Blue 2 Short Error/ Blue 3 Short Error/ Blue 4 Short Error
Some blue LEDs in the light source have short circuit or are disconnected.
Green 1 Short Error/ Green 2 Short Error
Some green LEDs in the light source have short circuit or are disconnected.
Light Green 1 Short Error/ Light Green 2 Short Error/ Light Green 3 Short Error/ Light Green
4 Short Error
Some light green LEDs in the light source have short circuit or are disconnected.
Amber 1 Short Error/ Amber 2 Short Error/ Amber 3 Short Error/ Amber 4 Short Error
Some amber LEDs in the light source have short circuit or are disconnected.
Red 1 Short Error/ Red 2 Short Error/ Red 3 Short Error/ Red 4 Short Error
Some red LEDs in the light source have short circuit or are disconnected.
36
Base Fan Bad
The fan in the fixture base is disconnected from its control PCB or is faulty and should be replaced. A light
output from the fixture is closed.
Suction LED Fan 1 Bad/ Suction LED Fan 2 Bad
The suction fan 1 (fan 2) at the LED engine is is disconnected from its control PCB or is faulty and should be
replaced.
Exhaust LED Fan 1 Bad/ Exhaust LED Fan 2 Bad
The exhaust fan 1 (fan 2) at the LED engine is is disconnected from its control PCB or is faulty and should be
replaced.
Positions of fans (and their control PCBs):
37
10. Technical Specifications
Electrical
Power supply: electronic auto-ranging
Input voltage range: 100-240V, 50-60Hz
Fuse: T 10 A
Max. power consumption: 750W
Optic
Light source: LED engine (Red,Green,Blue,Amber,Light Green)
CMY/RGB colour mixing
CRI setting range: Standard (80) - High (90+)
Min. LED life expectancy: 30.000 hours
Virtual colour wheel
67 preset colours
70 preset multicolours
10 user colours
Rainbow effect with variable speed
Colour temperature correction
Effect wheel
Continuous selection of whites from 8000K to 2700K
Halogen lamp effect at whites 2700K- 4200K
Aluminium effect wheel rotating in both directions with variable speed
Rotating gobo wheel
7 glass gobos can be indexed and rotated in both directions at different speeds,
gobo wheel continuous rotation
Gobos: outside diameter= 26.8+0,1 mm, image diameter=23.5 mm, thickness=1-3.5 mm, high
temperature borofloat or better glass. Do not use steel gobos 0.15mm
"Slot&lock" system for easy replacement of gobos
Gobos order:
Note. Metal (or aluminium) gobos cannot be used due to thermal stress.
Prism
Rotating 6-facet prism with continuous rotation in both directions
Iris
Motorized iris for different beam diameters
Frost filters
2 separate,variable frost filters ( light (0.5°) and medium (10°))
The medium filter is replaceable
Framing shutters module
4 individually positionable blades plus rotation of the complete frame system +/- 60°
Each framing shutter can move up to 80% of the beam and swivel +/- 30°
38
Zoom
Strobe
Dimmer
Linear motorized zoom
Min. beam angle :7°
Max. beam angle: 49°
Strobe effect with variable speed (0.3 - 20Hz)
Smooth dimmer from 0 - 100 %
Camera (Robin T1 Profile FS only)
Type: SNZ-6320
Max. resolution: 1920 x 1080
16 : 9 Full HD (1080p) resolution support
32x optical zoom, 16x digital zoom
H.264, MJPEG dual codec, Multiple streaming
Day & Night (ICR), WDR (120dB)
Control
Graphic touch screen for fixture setting and addressing
Gravitation sensor for auto screen positioning
Battery backup of the touch screen
Readout fixture and LEDs usage, receiving DMX values, temperatures, etc
Built-in analyzer for easy fault finding, error messages
Built-in demo sequences
Silent fans cooling,
Stand-alone operation
3 user editable programs, each up to 100 steps
Supported protocols: USITT DMX 512, RDM, ArtNet, MANet, MANet2, sACN
Support of RDM (Remote Device Management)
3 DMX modes (49, 33, 53 control channels)
Wireless DMX/RDM module
Compliance with USITT DMX-512 (1986 & 1990) and 512-A
Full DMX fidelity and frame integrity
Auto sensing of DMX frame rate and frame size
<5ms DMX latency
Operational frequency range of 2402-2480 MHz
Producer: LumenRadio
Pan/Tilt
Pan movement range 540°
Tilt movement range 280°
16 bit movement resolution
Pan/Tilt electronic motion stabilizer
Automatic Pan/Tilt position correction
Remotely controllable speed of pan/tilt movement for easy programming
Pan/tilt-lock mechanism
Connection
Rigging
DMX data in/out: Locking 3-pin and 5-pin XLR
AC power input: Chassis connector Neutrik PowerCon TRUE 1, NAC3MPX
Camera output: RJ 45
Ethernet: RJ 45
Mounting points: 2 pairs of 1/4-turn locks
Mounting horizontally or vertically via 2 Omega brackets
39
Temperatures
Maximum/Minimum ambient operating temperature : +45°C/-5°C
Maximum housing temperature : 70° C
Minimum distances
Min. distance from flammable surfaces: 0.5 m
Min. distance to lighted object: 2 m
Total heat dissipation
2560 BTU/hr (calculated)
Weight
24.3 kg (Robin T1)
25.5kg (Robin T1 FS)
Protection factor
IP2X
Dimensions (mm)
40
Accessories
1 x Omega adaptor CL-regular 2 pcs in box (P/N 10980033)
1 x Power cable including powerCON TRUE1
1 x Gel Frame adaptor T1 Profile (P/N 10980440), installed on the fixture head
Optional accessories
Gel Frame T1 Profile (P/N 10980443)
Gel Frame adaptor T1 with Top Hat (P/N 10980474)
Doughty Trigger Clamp (P/N 17030386)
Safety wire 35 kg (P/N 99011963)
Frost filter 5° (P/N 99015907)
Frost filter 20°(P/N 99015908)
Robin T1 LightMaster (10080331)
Upgrade kit CRMX Universal 260 (P/N 99030100)
Photometric diagrams
41
42
11. Maintenance and cleaning
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build
up on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances
should alcohol or solvents be used!
DANGER !
Disconnect from the mains before starting any
maintenance work
The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing
the light-output very quickly. The cooling-fans should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
Gobo wheels and the internal lenses should be cleaned monthly.
Remove dust and dirt from the fans and cooling vents using a soft brush and vacuum-cleaner.
Important! Check the air filters periodically and clean before they become clogged!
Clean the air filters placed in the base. Use a vacuum cleaner, compressed air or you can wash them and put
back dry.
After replacing the air filters, reset the elapsed time counter in the menu "Information"
(Information--->Air Filters---> Elapsed Time).
Replacing the fuse.
Before replacing the fuse, unplug mains lead.
1. Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing
(anti-clockwise).
2. Remove the old fuse from the fuse holder.
3. Install the new fuse in the fuse holder (only the same type and rating).
4. Replace the fuseholder in the housing and fix it.
Checking plastic parts of the fixture.
The plastic parts of the fixture should be checked for damages and beginning cracks at least every two months.
In addition, the plastic part of the front lens has to be checked mechanically (by means of movement by the
plastic part) if it is firmly fastened to the fixture. If hint of a crack is found on some plastic part, do not use the
fixture until the damaged part will be replaced.
Cracks or another damages of the plastic parts can be caused by the fixture transportation or manipulation and
also ageing process may influence plastic materials.
This checking is necessary for both fixed installations and preparing fixtures for renting. Any free moving parts
inside of the fixture head, cracked plastic or any plastic part of front lens not sitting properly in place need to
be immediately replaced.
Example of a crack on the plastic cover (for illustrative purpose).
43
11.1 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local
regulations and codes.
12. ChangeLog
This section summarizes changes in the user manual.
Version of the
manual
Date of issue
Description of changes
1.1
12/01/2019
Error messages for fans added
1.2
12/02/2019
New photometric diagrams, description of colour control functions added
1.3
20/02/2019
DMX chart v. 1.5
1.4
25/03/2019
Gel Frame adaptor T1 installation
1.5
31/07/2019
Check of plastic parts added (chapter Maintenance and cleaning)
1.6
16/09/2019
Warning " CAUTION ! Risk group 2, RG-2" added
1.7
27/09/2019
Technical specifications improvement
1.8
14/10/2019
DMX chart v. 1.6
1.9
31/10/2019
DMX chart v. 1.7
December 3, 2019
Copyright © 2018-2019 Robe Lighting - All rights reserved
All Specifications subject to change without notice
Made in CZECH REPUBLIC by ROBE LIGHTING s.r.o. Palackeho 416/20 CZ 75701 Valasske Mezirici
44
DMX protocol
Robin T1 Profile - DMX protocol
Version: 1.7 Mode 1-CMY/RGB, Mode 2 -Reduced CMY/RGB, Mode 3-Five colours (R,G,B,A,Light Green)
Quick overview of default DMX values for each channel
Mode/channel
1
2
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
*
*
*
*
*
*
*
*
*
*
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
1
2
3
4
5
6
*
*
7
8
*
9
*
10
*
11
*
*
*
*
*
*
*
*
*
*
*
12
*
*
*
*
13
14
*
15
16
*
17
18
19
20
1
2
3
4
5
6
7
8
9
10
11
*
*
*
*
*
*
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Default
DMX Value
128
0
128
0
0
0
10
128
0
0
0
0/255
0/255
0/255
0/255
0/255
0/255
255
255
255
255
255
255
255
255
255
255
110
128
0
0
0
0
128
0
0
128
0
0
128
0
0
Function
Pan
Pan Fine
Tilt
Tilt fine
Pan/Tilt speed , Pan/Tilt time
Power/Special functions
LED frequency selection
LED frequency fine adjusting
Colour functions
CRI selection
Virtual colour wheel
Cyan/Red (8 bit)
Cyan/Red (16 bit)
Magenta/Green (8 bit)
Magenta/Green (16 bit)
Yellow/Blue (8 bit)
Yellow/Blue (16 bit)
Red (8 bit)
Red (16bit)
Green (8 bit)
Green (16bit)
Blue (8 bit)
Blue (16bit)
Amber (8 bit)
Amber (16bit)
Light green (8 bit)
Light green (16bit)
Colour temperature correction (CTC)
Green correction
Colour mix control
Speed of rot. Gobo selection
Rot. Gobo carousel/ Framing shutters/Zoom/Focus/Iris/Frost/Prism time
Effect wheel positioning
Effect wheel rotation
Effect wheel animations
Rotating gobo wheel
Rot. gobo indexing and rotation
Rot. gobo indexing/rotation - fine
Prism
Prism rotation
Frost
Iris
Page 1
DMX protocol
1
Mode/channel
2
3
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
*
21
*
22
*
23
24
25
26
27
28
29
30
31
32
33
*
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
1
Mode/channel
2
3
1
1
1
2
2
2
Default
DMX Value
0
128
0
128
0
128
0
128
0
128
0
128
0
128
32
0
0
3
4
4
5
5
5
Pan movement by 540° (128=default)
0 - 255
Fine control of pan movement (0=default)
0 - 255
Tilt movement by 280° (128=default)
proportional
proportional
Tilt
proportional
Tilt fine
Fine control of tilt movement (0=default)
proportional
Pan/Tilt speed , Pan/Tilt time
0
1
2 - 255
2 - 255
6
Type of
control
Pan Fine
0 - 255
6
Function
Pan
3
4
Iris - fine
Zoom
Zoom - fine
Focus
Focus - fine
Framing shutters module rotation
Framing shutter 1- movement
Framing shutter 1- swivelling
Framing shutter 2- movement
Framing shutter 2- swivelling
Framing shutter 3 movement
Framing shutter 3- swivelling
Framing shutter 4 movement
Framing shutter 4- swivelling
Shutter/ strobe
Dimmer intensity
Dimmer intensity - fine
DMX
Value
0 - 255
3
Function
Standard mode (0=default)
Max. Speed Mode
Pan/Tilt speed mode
Speed from max. to min.
Pan/Tilt time mode
Time from 0.2 sec. to 25.5 sec.
step
step
proportional
proportional
Power/Special functions
6
Factory display menu setting: DMX Input-Wired ,Graphic displayOn, Pan/tilt Mode-Speed,Blackout while pan/tilt moving-Off,
Blackout while gobo wheel moving-Off, Fans mode-Auto
0 -9
10-14
15-19
Reserved (0=default)
To activate following functions, stop in DMX value for at least 3 s and
shutter must be closed at least 3 sec. („Shutter,Strobe” channel 47/32/51
must be at range: 0-31 DMX). Corresponding menu items are temporarily
overriden.
DMX input: Wired DMX *
DMX input: Wireless DMX *
* function is active only 10 seconds after switching the fixture on
Page 2
step
step
DMX protocol
1
Mode/channel
2
3
DMX
Value
20-24
25-29
30-39
40-44
45-49
50-54
55-59
60-64
65-69
70-74
75-79
80-119
120-124
125-129
Function
Type of
control
Graphic display: On
Graphic display: Off
Reserved
step
Pan/Tilt mode: Speed
Pan/Tilt mode: Time
Blackout while pan/tilt moving: On
Blackout while pan/tilt moving: Off
Blackout while gobo wheel moving: On
Blackout while gobo wheel moving: Off
Fans mode: Auto
Fans mode: High
Reserved
step
Parking position On
Parking position Off
step
step
step
step
step
step
step
step
step
step
step
To activate following functions, stop in DMX value for at least 3 seconds.
130 - 139
140 - 149
150 - 159
160 - 169
170 - 179
180 - 189
190 - 199
200 - 209
210-224
Fixture reset (except pan/tilt)
Pan/Tilt reset
Reserved
Gobo wheel/effect wheel reset
Reserved
Zoom/focus/frost/prism reset
Iris /framing shutters reset
Total fixture reset
Reserved
step
step
step
step
step
step
The following RoboSpot related commands are only applicable when the RoboSpot
is connected:
225 - 229
230 - 234
235 - 239
240
241 - 255
7
*
RoboSpot enabled
RoboSpot disabled - except handle faders and pan/tilt
RoboSpot fully disabled
Disabled "Quiet mode"
Quiet mode - fan noise control from min. to max.
step
step
step
step
proportional
LED frequency selection
Factory display menu setting: 600Hz
7
Select PWM output frequency of LEDs. Selected PWM frequency can be
fine adjusted in 127 steps up/down around selected PWM frequency on
the channel below. Corresponding menu item (Frequency Setup) is
temporarily overriden.
0-4
5-9
10-14
15-19
20-24
25-255
PWM frequency from Display menu (fixture utilizes PWM
frequency set in the display menu item Frequency Setup).
step
300 Hz
600 Hz (10=default)
1200 Hz
2400 Hz
Reserved (fixture utilizes PWM frequency set in the display menu item
step
step
step
step
Frequency Setup).
8
*
LED frequency fine adjusting
Factory display menu setting: 600Hz
8
Select desired PWM output frequency of LEDs on the channel above.
0-1
Selected LED Frequency
Page 3
step
DMX protocol
1
Mode/channel
2
3
DMX
Value
2
3
4
:
125
126
127
128
129
130
131
:
252
253
254
255
9
7
9
0
Function
Type of
control
LED Frequency (step -126)
LED Frequency (step -125)
LED Frequency (step -124)
step
LED Frequency (step -3)
LED Frequency (step -2)
LED Frequency (step -1)
step
Selected LED Frequency (128=default)
step
LED Frequency (step +1)
LED Frequency (step +2)
LED Frequency (step +3)
step
LED Frequency (step +124)
LED Frequency (step +125)
LED Frequency (step +126)
Selected LED Frequency
Colour functions
Factory display menu setting: Colour mixing mode-CMY, Dimmer
Curve-Square Law, Tungsten effect simulation-Off, Chromatic whiteOff, Light output stability-Off, Uniformity-Off
step
No function (0=default)
step
step
step
step
step
step
step
step
step
step
To activate following functions, stop in DMX value for at least 3 seconds.
Corresponding menu items are temporarily overriden
1-39
40-44
45-49
50-54
55-59
60-79
Reserved
Colour mixing mode: CMY (DMX Mode 1 and 2 only)
step
Colour mixing mode: RGB (DMX mode 1 and 2), RGBAL (DMX mode 3 only)
step
Dimmer curve: Square law
Dimmer curve: Linear
Raw DMX
Tungsten effect simulation for whites 2700K-4200K only:
80-84 Tungsten effect simulation (750W/80V): On
85-89 Tungsten effect simulation (1000W/240V): On
90-94 Tungsten effect simulation (1200W/240V): On
95-99 Tungsten effect simulation (2000W/230V): On
100-104 Tungsten effect simulation (2500W/230V): On
105-109 Tungsten effect simulation: Off
110-114 Save user colour (see user manual, chapter 5.1 Colour influencing functions)
115-119 Chromatic white: On
120-124 Chromatic white: Off
125-129 Light output stability On
130-134 Light output stability Off
135-139 Uniformity On
140-144 Uniformity Off
145-255 Reserved
10
8
*
step
proportional
step
step
step
step
step
step
step
step
step
step
step
step
step
CRI selection
10
0-255
11
step
CRI selection from Standard (80) to High (90+) (0=default)
proportional
Virtual colour wheel
11
0
1-2
No function (0=default)
Filter 4 (Medium Bastard Amber)
Page 4
step
step
DMX protocol
1
Mode/channel
2
3
DMX
Value
3-4
5-6
7-8
9-10
11-12
13-14
15-16
17-18
19-20
21-22
23-24
25-26
27-28
29-30
31-32
33-34
35-36
37-38
39-40
41-42
43-44
45-46
47-48
49-50
51-52
53-54
55-56
57-58
59-60
61-62
63-64
65-66
67-68
69-70
71-72
73-74
75-76
77-78
79-80
81-82
83-84
85-86
87-88
89-90
91-92
93-94
95-96
97-98
Function
Filter 10 (Medium Yellow)
Filter 19 (Fire)
Filter 26 (Bright Red)
Filter 58 (Lavender)
Filter 68 (Sky Blue)
Filter 71 (Tokyo Blue)
Filter 79 (Just Blue)
Filter 88 (Lime Green)
Filter 90 (Dark Yellow Green)
Filter 100 (Spring Yellow)
Filter 101 (Yellow)
Filter 102 (Light Amber)
Filter 103 (Straw)
Filter 104 (Deep Amber)
Filter 105 (Orange)
Filter 106 (Primary Red)
Filter 111 (Dark Pink)
Filter 115 (Peacock Blue)
Filter 116 (Medium Blue-Green)
Filter 117 (Steel Blue)
Filter 118 (Light Blue)
Filter 119 (Dark Blue)
Filter 120 (Deep Blue)
Filter 121 (Filter Green)
Filter 128 (Bright Pink)
Filter 131 (Marine Blue)
Filter 132 (Medium Blue)
Filter 134 (Golden Amber)
Filter 135 (Deep Golden Amber)
Filter 136 (Pale Lavender)
Filter 137 (Special Lavender)
Filter 138 (Pale Green)
Filter 139 (Primary Green)
Filter 141 (Bright Blue)
Filter 147 (Apricot)
Filter 148 (Bright Rose)
Filter 152 (Pale Gold)
Filter 154 (Pale Rose)
Filter 157 (Pink)
Filter 158 (Deep Orange)
Filter 162 (Bastard Amber)
Filter 164 (Flame Red)
Filter 165 (Daylight Blue)
Filter 169 (Lilac Tint)
Filter 170 (Deep Lavender)
Filter 172 (Lagoon Blue)
Filter 179 (Chrome Orange)
Filter 180 (Dark Lavender)
Page 5
Type of
control
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
DMX protocol
1
Mode/channel
2
3
DMX
Value
99-100
101-102
103-104
105-106
107-108
109-110
111-112
113-114
115-116
117-118
119-120
121-122
123-124
125-126
127-128
129-130
131-132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
Function
Filter 181 (Congo Blue)
Filter 197 (Alice Blue)
Filter 201 (Full C.T. Blue)
Filter 202 (Half C.T. Blue)
Filter 203 (Quarter C.T. Blue)
Filter 204 (Full C.T. Orange)
Filter 205 (Half C.T. Orange)
Filter 206 (Quarter C.T. Orange)
Filter 247 (Filter Minus Green)
Filter 248 (Half Minus Green)
Filter 281 (Three Quarter C.T. Blue)
Filter 285 (Three Quarter C.T. Orange)
Filter 352 (Glacier Blue)
Filter 353 (Lighter Blue)
Filter 715 (Cabana Blue)
Filter 778 (Millennium Gold)
Filter 793 (Vanity Fair)
The following 70 multicolours are intended for using with prisma,
rot. gobo, or effect wheel only. If none of the three effects is used,
the colours wil not create multicolour effect.
Multicolour 1
Multicolour 2
Multicolour 3
Multicolour 4
Multicolour 5
Multicolour 6
Multicolour 7
Multicolour 8
Multicolour 9
Multicolour 10
Multicolour 11
Multicolour 12
Multicolour 13
Multicolour 14
Multicolour 15
Multicolour 16
Multicolour 17
Multicolour 18
Multicolour 19
Multicolour 20
Multicolour 21
Multicolour 22
Multicolour 23
Multicolour 24
Multicolour 25
Multicolour 26
Multicolour 27
Multicolour 28
Page 6
Type of
control
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
DMX protocol
1
Mode/channel
2
3
DMX
Value
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203-215
216-217
218-219
220-221
222-223
224-225
Function
Multicolour 29
Multicolour 30
Multicolour 31
Multicolour 32
Multicolour 33
Multicolour 34
Multicolour 35
Multicolour 36
Multicolour 37
Multicolour 38
Multicolour 39
Multicolour 40
Multicolour 41
Multicolour 42
Multicolour 43
Multicolour 44
Multicolour 45
Multicolour 46
Multicolour 47
Multicolour 48
Multicolour 49
Multicolour 50
Multicolour 51
Multicolour 52
Multicolour 53
Multicolour 54
Multicolour 55
Multicolour 56
Multicolour 57
Multicolour 58
Multicolour 59
Multicolour 60
Multicolour 61
Multicolour 62
Multicolour 63
Multicolour 64
Multicolour 65
Multicolour 66
Multicolour 67
Multicolour 68
Multicolour 69
Multicolour 70
Reserved
User colour 1
User colour 2
User colour 3
User colour 4
User colour 5
Type of
control
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
Page 7
DMX protocol
1
Mode/channel
2
3
DMX
Value
226-227
228-229
230-231
232-233
234-235
236-245
246-255
12
9
*
0 - 255
13
14
15
16
17
*
*
10
*
11
*
*
*
*
0 - 255
Yellow/Blue (8 bit)
Colour saturation control - coarse 0-100% (0=default for CMY
mode, 255=default for RGB mode)
proportional
0 - 255
Yellow/Blue (16 bit)
Colour saturation control - fine (0=default for CMY mode,
255=default for RGB mode)
proportional
15
16
0 - 255
*
*
17
*
*
18
0 - 255
0 - 255
*
*
19
0 - 255
*
*
20
0 - 255
*
*
21
18
12
22
proportional
proportional
0 - 255
*
proportional
Magenta/Green (16 bit)
Colour saturation control - fine (0=default for CMY mode,
255=default for RGB mode)
0 - 255
*
proportional
0 - 255
0 - 255
*
step
proportional
0 - 255
14
step
Magenta/Green (8 bit)
Colour saturation control - coarse 0-100% (0=default for CMY
mode, 255=default for RGB mode)
12
*
step
0 - 255
*
*
step
proportional
*
13
step
Cyan/Red (16 bit)
Colour saturation control - fine (0=default for CMY mode,
255=default for RGB mode)
*
*
User colour 6
User colour 7
User colour 8
User colour 9
User colour 10
Rainbow effect (with fade time) from slow-> fast
Rainbow effect (without fade time) from slow-> fast
Cyan/Red (8 bit)
Colour saturation control - coarse 0-100% (0=default for CMY
mode, 255=default for RGB mode)
Type of
control
0 - 255
*
*
Function
0 - 255
0-1
2-64
65
Red (8 bit)
Colour saturation control - coarse 0-100% (255=default)
Red (16bit)
Colour saturation control - fine (255=default)
Green (8 bit)
Colour saturation control - coarse 0-100% (255=default)
Green (16bit)
Colour saturation control - fine (255=default)
Blue (8 bit)
Colour saturation control - coarse 0-100% (255=default)
Blue (16bit)
Colour saturation control - fine (255=default)
Amber (8 bit)
Colour saturation control - coarse 0-100% (255=default)
Amber (16bit)
Colour saturation control - fine (255=default)
Light green (8 bit)
Colour saturation control - coarse 0-100% (255=default)
Light green (16bit)
colour saturation control - fine (255=default)
Colour temperature correction (CTC)
8000 K
Colour temperature changing 7978 K ->6622 K (22 K /1 DMX)
6600 K
Page 8
proportional
proportional
proportional
proportional
proportional
proportional
proportional
proportional
proportional
proportional
step
proportional
step
DMX protocol
1
Mode/channel
2
3
DMX
Value
Function
66-109
110
111-179
180
181-229
230
231-254
255
19
20
*
*
23
Colour temperature changing 657 8K ->5622 K (22 K/1 DMX)
5600 K (110=default)
Colour temperature changing 5580 K ->4220 K (20 K/1 DMX)
4200 K
Colour temperature changing 4180 K ->3220 K (20 K/1 DMX)
3200 K
Colour temperature changing 3180 K ->2720 K (20K /1 DMX)
2700K
Green correction
0
Uncorrected white
1-127 Minus green --> uncorrected white
128
Uncorrected white (128=default)
129-254 Uncorrected white --> Plus green
255
Uncorrected white
Type of
control
proportional
step
proportional
step
proportional
step
proportional
step
step
proportional
step
proportional
step
Colour mix control
24
Defines relation between Virtual Colour wheel and colour channels
"Virtual" = Virtual Colour Wheel
"Colour mix" = Colour channels (CMY/RGBALight Green/CTC)
0-9
10-19
20-29
30-39
40-49
50-59
60-69
70-79
80-128
"Virtual " has priority over "Colour mix" (0=default)
Maximum mode (highest values have priority)
Minimum mode (lowest values have priority)
Multiply mode (multiply "Virtual" and "Colour mix")
Addition mode ("Virtual" + "Colour mix")
Subtraction mode ("Virtual" – "Colour mix")
Inverted Subtraction mode ("Colour mix"-"Virtual")
White Point Off (CTC+Green Cor.+Virtual Colour Wheel deactivated)
*
*
26
1 - 255
1-50
24
13
14
step
step
step
step
step
proportional
step
Speed of rot. gobo selection from max. to min. (0=default)
proportional
Rot. Gobo carousel/ Framing
shutters/Zoom/Focus/Iris/Frost/Prism time
0
1-255
23
step
Speed of rot. Gobo selection
25
0-255
22
step
Reserved
129
Crossfade "Virtual" only
130-254 Crossfade between "Virtual" and "Colour mix"
255
Crossfade "Colour mix" only
21
step
Function is off (0=default)
step
Time of rot. Gobo carousel movement (0.1 sec-->25.5 sec.)
proportional
Time of framing shutters, zoom, focus, iris and frost movement (0.1
proportional
sec-->25.5 sec.)
Time of prism movement (0.1 sec-->5 sec.)
proportional
Effect wheel positioning
27
0-19
20-127
128-170
171-213
214-255
No function (0=default)
Proportional indexing (73-center)
Ramping from open to full position ( max--->min. speed)
Ramping from open to half position ( max. --->min. speed)
Ramp. from half position to full position ( max. --->min. speed)
0
1 - 127
No rotation
Forwards rotation from fast to slow
step
proportional
proportional
proportional
proportional
Effect wheel rotation
28
Page 9
step
proportional
DMX protocol
1
Mode/channel
2
3
DMX
Value
Function
128
No rotation (128=default)
129 - 255 Backwards rotation from slow to fast
25
*
Type of
control
step
proportional
Effect wheel animations
29
0-7
No animation (0=default)
Note : Set suitable DMX value at Focus channel to get desired
animation. All animations were created at distance of 5 m from screen
with zoom=88 DMX, Focus value is different for each effect (focus value is
stated in parentheses for this distance)
The following channels are blocked: Effect wheel positioning, Effect
wheel rotation, Rotating gobo wheel, Rot. Gobo indexing and rotation.
8-9
10-11
12-13
14-15
16-17
18-19
20-21
22-23
24-25
26-27
28-255
26
15
Macro 1 (Focus=94)
Macro 2 (Focus=84)
Macro 3 (Focus=87)
Macro 4 (Focus=69)
Macro 5 (Focus=82)
Macro 6 (Focus=82)
Macro 7 (Focus=72)
Macro 8 (Focus=86)
Macro 9 (Focus=78)
Macro 10 (Focus=102)
Reserved
step
step
step
step
step
step
step
step
step
step
Rotating gobo wheel
30
0-3
4-7
8-11
12-15
16-19
20-23
24-27
28-31
32-35
36-39
40-43
44-47
48-51
52-55
56-59
Index - set indexing on channel 27/16/31
Open/hole (0=default)
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Rotation - set rotation on channel 27/16/31
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
Shaking gobos from slow to fast
60 - 69
70 - 79
80 - 89
90 - 99
100 - 109
110 - 119
120 - 129
Index - set indexing on channel 27/16/31
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Page 10
proportional
proportional
proportional
proportional
proportional
proportional
proportional
DMX protocol
1
Mode/channel
2
3
DMX
Value
Function
Type of
control
Shaking gobos from slow to fast
130 - 139
140 - 149
150 - 159
160 - 169
170 - 179
180 - 189
190 - 199
200 - 201
202 - 221
222 - 223
224 - 243
244 - 249
250 - 255
27
16
Rotation - set rotation on channel 27/16/31
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Open/hole
Forwards gobo wheel rotation from fast to slow
No rotation
Backwards gobo wheel rotation from slow to fast
Random gobo selection by audio control
(Set microphone sensitivity in menu „Personality”)
Auto random gobo selection from fast to slow
*
17
proportional
proportional
proportional
proportional
proportional
step
proportional
step
proportional
step
proportional
proportional
step
proportional
step
proportional
Rot. gobo indexing/rotation - fine
32
0-255
29
proportional
Rot. gobo indexing and rotation
31
Gobo indexing - set position on channel 26/15/30
0 - 255 Gobo indexing
Gobo rotation - set position on channel 26/15/30
0
No rotation
1 - 127 Forwards gobo rotation from fast to slow
128
No rotation (128=default)
129 - 255 Backwards gobo rotation from slow to fast
28
proportional
Fine indexing/rotation (0=default)
proportional
Prism
33
0 - 19
20-127
Open position - hole (0=default)
Rotating prism inserted
Prism/gobo macros
step
step
The following channels are blocked: Prism, Prism rotation, Rotating gobo
wheel, Rot. Gobo indexing and rotation.
128 - 135
136 - 143
144 - 151
152 - 159
160 - 167
168 - 175
176 - 183
184 - 191
192 - 199
200 - 207
208 - 215
216 - 223
224 - 231
232 - 239
240 - 247
248 - 255
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
step
Page 11
DMX protocol
1
Mode/channel
2
3
30
18
DMX
Value
19
1-50
51-53
54-63
64-73
74-83
84-86
87-136
137-139
140-149
150-159
160-169
170-172
173-222
223-225
226-235
236-245
246-255
20
No rotation
Forwards prism rotation from fast to slow
No rotation (128=default)
Backwards prism rotation from slow to fast
Open (0=default)
Light Frost
Light Frost from 0% to 100%
100% Light Frost
Pulse closing from slow to fast
Pulse opening from fast to slow
Ramping from fast to slow
Open
Medium Frost
Medium Frost from 0% to 100%
100% Medium Frost
Pulse closing from slow to fast
Pulse opening from fast to slow
Ramping from fast to slow
Open
Combined Frost
Medium Frost from 0% to 100% (Light Frost inserted)
100% Medium Frost (Light Frost inserted)
Pulse closing from slow to fast
Pulse opening from fast to slow
Ramping from fast to slow
34
*
21
0 - 255
Fine iris movement (0=default)
0 - 255
Zoom from max. to min.beam angle (128=default)
39
36
22
40
*
step
proportional
step
proportional
proportional
proportional
step
proportional
step
proportional
proportional
proportional
step
proportional
step
proportional
proportional
proportional
step
proportional
step
proportional
proportional
step
step
step
step
proportional
proportional
Zoom - fine
0-255
37
proportional
Zoom
38
*
step
Iris - fine
37
35
proportional
Iris
36
0
Open (0=default)
1 - 179 From max.diameter to min.diameter
180 - 191 Closed
Pulse effects with Iris blackout
192 -219 Pulse opening from slow to fast
220 - 247 Pulse closing from fast to slow
248 - 249 Random pulse opening (fast)
250 - 251 Random pulse opening (slow)
252 - 253 Random pulse closing (fast)
254 - 255 Random pulse closing (slow)
33
step
Frost
35
0
32
Type of
control
Prism rotation
34
0
1 - 127
128
129-255
31
Function
Fine zooming (0=default)
proportional
Focus
0 - 255
Continuous adjustment from far to near (128=default)
0- 255
Fine focusing (0=default)
proportional
Focus - fine
41
Page 12
proportional
DMX protocol
1
Mode/channel
2
3
38
23
42
39
24
43
40
25
44
41
42
43
44
45
46
47
48
49
26
27
28
29
30
31
32
33
*
45
46
47
48
49
50
DMX
Value
Function
Framing shutters module rotation
0-127 Rotation from right (0°) to 60°
128
Center (128=default)
129-255 Rotation from 60° to left (120°)
Framing shutter 1- movement
0-255 Movement from Outward to Inward (0=default)
Framing shutter 1- swivelling
0-127 Swivelling from -30 degrees towards 0 degrees
128
0 degrees (128=default)
129-255 Swivelling from 0 degrees to +30 degrees
Framing shutter 2- movement
0-255 Movement from Outward to Inward (0=default)
Framing shutter 2- swivelling
0-127 Swivelling from -30 degrees towards 0 degrees
128
0 degrees (128=default)
129-255 Swivelling from 0 degrees to +30 degrees
Framing shutter 3 movement
0-255 Movement from Outward to Inward (0=default)
Framing shutter 3- swivelling
0-127 Swivelling from -30 degrees towards 0 degrees
128
0 degrees (128=default)
129-255 Swivelling from 0 degrees to +30 degrees
Framing shutter 4 movement
0-255 Movement from Outward to Inward (0=default)
Framing shutter 4- swivelling
0-127 Swivelling from -30 degrees towards 0 degrees
128
0 degrees (128=default)
129-255 Swivelling from 0 degrees to +30 degrees
Type of
control
proportional
step
proportional
proportional
proportional
step
proportional
proportional
proportional
step
proportional
proportional
proportional
step
proportional
proportional
proportional
step
proportional
Shutter/ strobe
51
0 - 31
32 - 63
64 - 95
96 - 127
128 - 143
144 - 159
160 - 191
192 - 223
224 - 255
Shutter closed
Shutter open (32=default)
Strobe-effect from slow to fast
Shutter open
Opening pulse in sequences from slow to fast
Closing pulse in sequences from fast to slow
Shutter open
Random strobe-effect from slow to fast
Shutter open
0 - 255
Dimmer intensity from 0% to 100% (0=default)
0 - 255
Fine dimming (0=default)
step
step
proportional
step
proportional
proportional
step
proportional
step
Dimmer intensity
52
proportional
Dimmer intensity - fine
53
Copyright © 2018-2019 Robe Lighting s.r.o. - All rights reserved
All Specifications subject to change without notice
Page 13
proportional
Colour macros on Virtual Colour Wheel
Colour name
Filter 4 (Medium Bastard Amber)
Filter 10 (Medium Yellow)
Filter 19 (Fire)
Filter 26 (Bright Red)
Filter 58 (Lavender)
Filter 68 (Sky Blue)
Filter 71 (Tokyo Blue)
Filter 79 (Just Blue)
Filter 88 (Lime Green)
Filter 90 (Dark Yellow Green)
Filter 100 (Spring Yellow)
Filter 101 (Yellow)
Filter 102 (Light Amber)
Filter 103 (Straw)
Filter 104 (Deep Amber)
Filter 105 (Orange)
Filter 106 (Primary Red)
Filter 111 (Dark Pink)
Filter 115 (Peacock Blue)
Filter 116 (Medium Blue-Green)
Filter 117 (Steel Blue)
Filter 118 (Light Blue)
Filter 119 (Dark Blue)
Filter 120 (Deep Blue)
Filter 121 (Filter Green)
Filter 128 (Bright Pink)
Filter 131 (Marine Blue)
Filter 132 (Medium Blue)
Filter 134 (Golden Amber)
Filter 135 (Deep Golden Amber)
Filter 136 (Pale Lavender)
Filter 137 (Special Lavender)
Filter 138 (Pale Green)
Filter 139 (Primary Green)
Filter 141 (Bright Blue)
Filter 147 (Apricot)
Filter 148 (Bright Rose)
Filter 152 (Pale Gold)
Filter 154 (Pale Rose)
Filter 157 (Pink)
Filter 158 (Deep Orange)
Filter 162 (Bastard Amber)
Filter 164 (Flame Red)
Filter 165 (Daylight Blue)
Filter 169 (Lilac Tint)
Filter 170 (Deep Lavender)
Red DMX
Green
DMX
Blue DMX
Amber
DMX
255
255
255
255
255
132
0
123
255
0
255
255
255
255
255
255
255
255
0
0
45
4
0
3
84
255
0
0
255
255
184
231
255
0
0
255
255
255
255
255
255
255
255
12
255
255
47
65
0
0
0
190
0
147
237
255
0
0
142
138
0
0
0
0
255
255
255
255
165
165
255
0
255
255
51
35
7
63
224
255
255
0
0
0
0
0
0
175
0
255
12
0
7
0
0
0
68
159
255
171
2
2
0
0
4
4
0
0
0
11
31
20
42
37
118
111
0
10
75
102
0
0
51
43
6
0
77
4
7
11
16
7
0
7
0
158
27
65
255
255
186
25
255
0
0
0
198
0
255
255
255
255
255
255
104
255
0
0
158
0
0
0
235
127
51
0
255
255
255
255
255
0
0
255
255
255
255
255
255
255
142
3
255
255
1
Light
Green
DMX
87
132
1
0
44
36
0
56
185
169
223
157
90
97
124
60
0
59
72
63
225
77
0
0
24
0
116
42
42
0
60
99
200
84
82
115
13
112
119
27
30
50
0
156
61
90
Colour name
Filter 172 (Lagoon Blue)
Filter 179 (Chrome Orange)
Filter 180 (Dark Lavender)
Filter 181 (Congo Blue)
Filter 197 (Alice Blue)
Filter 201 (Full C.T. Blue)
Filter 202 (Half C.T. Blue)
Filter 203 (Quarter C.T. Blue)
Filter 204 (Full C.T. Orange)
Filter 205 (Half C.T. Orange)
Filter 206 (Quarter C.T. Orange)
Filter 247 (Filter Minus Green)
Filter 248 (Half Minus Green)
Filter 281 (Three Quarter C.T. Blue)
Filter 285 (Three Quarter C.T. Orange)
Filter 352 (Glacier Blue)
Filter 353 (Lighter Blue)
Filter 715 (Cabana Blue)
Filter 778 (Millennium Gold)
Filter 793 (Vanity Fair)
Red DMX
Green
DMX
Blue DMX
Amber
DMX
0
255
92
185
0
38
164
255
255
255
255
255
255
38
255
16
14
0
255
255
238
0
15
0
249
150
13
203
125
139
60
28
20
255
0
255
255
222
0
0
113
0
188
214
163
97
123
54
0
5
17
36
45
102
0
119
66
182
0
26
0
255
76
0
39
36
34
104
255
255
255
255
255
136
255
5
0
0
255
171
2
Light
Green
DMX
255
112
46
0
0
246
255
255
14
67
105
56
200
227
121
149
157
0
37
0
45
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement