AND HT-CL Instruction Manual

AND HT-CL Instruction Manual
HT-CL Series Supplementary Instructions
The following information was changed/added to the HT-CL series instruction manual.
This addition to the instruction manual supports software version
[ Regarding Negative comparison for take away Cpp 1
p-1.01
and later.
]
Take-away check weighing (negative comparison) is the way to compare the negative weight
while taking away objects from a container. Set the function
Cpp 1 .
Note
To start the take-away check weighing, be sure to use the RE-ZERO
key to tare the weight of
the container filled with objects. The RE-ZERO key may zero the display, and the scale goes
below the zero point by taking out the objects.
Function setting list
Item / Display
Normal / Negative
comparison Cpp
Parameter
◆0
1
Description
Normal comparison
Negative comparison for take-away check weighing
◆ : Initial factory setting
Net 0
(Take-away)
LO
OK
Lower limit
1124040214
Negative weight
HI
Upper limit
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement