Cissell HD30SL Installation & Operation Manual

Cissell HD30SL Installation & Operation Manual
INSTALLATION GUIDE FOR
SURGE SUPPRESSORS
HD20 Thru HD150
A) Plug in (1) Surge Suppressor (TU14825) on the FAN CONTACTOR (TU13516).
B) Plug in one (1) each Surge Suppressor (TU14825) on EACH CONTACTOR of the REVERSING CONTACTOR (EA-00685-0) as shown.
Note: Part # TU14825 has ‘guide pins’ on the connector terminals, and can only be plugged-in, the
correct way.
TU13516
EA-00685-0
TU14825
TU14825
175# & 190# DRYERS
A) Connect one (1) Surge Suppressor (EA-00651-0) on the FAN CONTACTOR (TU14684), across
the COIL TERMINALS – A1 & A2. (Place bare wire of suppressor underneath screw terminals,
and tighten down).
B) Plug-in one (1) Surge Suppressor (TU14825) on EACH CONTACTOR of the REVERSING
CONTACTOR (EA-00685-0) as shown.
Note: Part # Tu14825 has ‘guide pins’ on the connector terminals, and can only be plugged-in, the
correct way. While Part # EA-00651-0 can be connected either way, electrically.
EA-00651-0
A1
A2
TU14684
EA-00685-0
TU14825
MAN3006
1/29/02
CISSELL MANUFACTURING CO.
D0169
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement