Troy-Bilt 23AAHAAX711 FLEX™ Water Pump Fast Start Guide

Troy-Bilt 23AAHAAX711 FLEX™ Water Pump Fast Start Guide
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
1
Roll the discharge hose flat and store it using
the discharge hose storage.
Unpacking Water Pump
3
WARNING! This
attachment weighs 61 lb.
and requires two people
to lift it.
1.
Open carton completely by
cutting each corner from top to
bottom.
2.
Remove the FLEX™ Water Pump
Attachment, its accessories and
literature, and any cardboard
inserts included with the water
pump.
3.
Discharge Hose
Suction Hose Tie
Down Strap
Discharge Hose
Storage
Suction Hose
Storage
Ensure you have all included
items prior to assembly.
Discharge Hose
Discharge Hose
Storage
2
Wrap the suction hose with strainer
around the suction hose storage and
secure it using the suction hose tie
down strap.
Suction Hose
Tie Down Strap
Suction Hose
Storage
Suction Hose with
Strainer
Suction Hose
with Strainer
CAUTION! When the FLEX™ Water Pump attachment is
attached to the FLEX™ Power Base, the engine should be started
after the water pump has been primed. We do not recommend
running the pump dry.
© 2015 23AAHAAX
778-13480
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement