Troy-Bilt 13YX79KT211 Horse XP Riding Lawn Mower Fast Start Guide

Troy-Bilt 13YX79KT211 Horse XP  Riding Lawn Mower  Fast Start Guide
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
1
1. With the wheels of the tractor pointing straight
forward, place the steering wheel
3
over the steering shaft.
2. Secure the steering wheel
with the washer (cupped side
down) and hex bolt.
Attach the red cable to the positive (+) battery
terminal and attach the black cable to the
negative (–) battery terminal with the bolts and
hex nuts.
Position the red rubber boot over the
positive battery terminal.
3. Push the steering wheel cap
down until it “clicks” into place.
Throttle
Control
2
Remove the shipping brace from the
discharge opening by grasping it
between your thumb and index finger
and rotating it clockwise.
Ignition
Switch
1. Remove the knob from the base
of the seat.
Brake
Pedal
4
2. Position the seat over the seat pan,
with the two forward seat mount tabs
fitting into the provided grooves.
3. Slide the seat rearward and align the center
mounting hole in the seat with the slot in the
seat pan and secure the seat with the knob.
Speed
Control
Lever
Tools Required:
• 3/8-inch wrench (or adjustable wrench)
• 7⁄16-inch wrench (or adjustable wrench)
• 1/2-inch socket wrench
PTO (Blade
Engage) Lever
© 2013 13WX79K
778-12000B
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
5
Fill fuel tank with clean, fresh gasoline.
Do not fill above the base of fuel tank neck.
Move the throttle control
into the Choke
position
8
Place PTO (Blade Engage) Lever in Off position.
FAST
Throttle
Control
6
Ignition
Switch
SLOW
Place Speed Control Lever
in N (neutral) position.
9
Brake
Pedal
Insert the ignition key and turn it to the Start
position.
Release the key into the Normal Mowing position
after the engine starts.
7
Fully depress the Brake Pedal.
Speed
Control
Lever
10
FAST
Note: Steering Wheel not shown for clarity.
PTO (Blade
Engage) Lever
© 2013 13WX79K
SLOW
Move Throttle to Fast
position.
778-12000B
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement