Troy-Bilt 11A426A011 Push Lawn Mower Fast Start Guide

Troy-Bilt 11A426A011 Push Lawn Mower Fast Start Guide
Read and understand all instruction, warning, and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
1
A
Blade Control Handle
3
A
B
D
B
Starter
Rope
Lift handle to extended position.
Tighten star knobs.
Place ends of lower handle onto handle brackets.
Insert carriage bolts and tighten with wing nuts.
11A-426A011
11A-426C211 © 2006
2
Refer to Operator’s Manual for instructions on attaching the grass catcher.
Need Help?
C
Star Knobs
Call 1-888-TO-HELP-U
Hold blade control handle against upper handle.
Slowly slip starter rope into rope guide.
Tighten rope guide wing knob.
4
Secure cable to lower handle with
cable tie provided.
(1-888-864-3578)
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING.
778-10594D
Read and understand all instruction, warning, and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
5
8
Oil Fill
Depress blade control handle and hold.
Fill tank with gas to within 1/2 inch of top of tank.
Gas Cap
6
Fill engine with entire contents of oil bottle supplied
with your mower.
Primer
Push primer five times.
7
Need Help?
Call 1-888-TO-HELP-U
9
Pull starter rope with quick, full arm stroke.
If engine does not start after five pulls,
repeat steps 7 through 9.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement