Fagor DRO 40i Quick Reference

DRO Innova 40i / 40i-B (Manual code: 14460086 version: 1501)
Quick Reference
This quick reference shows how to access the main functions shown by the color TFT screen of the DRO. Once
these functions are accessed, the DRO will guide the operator through its operations easily and intuitively with
interactive assistance messages.
For further detail on all the features, refer to the CD that comes with the DRO and contains the full installation
and operation manuals which are also available on our corporate website: www.fagorautomation.com.
Turning the DRO on and off
The DRO turns on automatically when applying voltage or after pressing the on/off key.
Front plate
Keys for entering numeric values
Keys for axes
TFT screen
Validate
Abort
Keys to open droplist buttons of the
FUNCTION BAR
Cursor keys
Power-off button
Power indicator LED
Axis zero and preset
Pressing Set/Clear toggles between axis zeroing (Clear) and presetting (Set). The status bar shows the current
status of this function at the top left with the letters C or S.
Degrees < - > Degrees Minutes Seconds
Searching the center of a part
DRO Innova 40i / 40i-B (Manual code: 14460086 version: 1501)
Main screen:
Display units mm/inch
Here are the functions the machine
operator can access from a main menu or
main screen.
Active reference Nr.
Set/Clear
Probe ON
STATUS
BAR
Once the functions are accessed, the
DRO guides the operator through screen
messages and a direct access to help
texts for each operation using the function
key ?.
Home search
FUNCTION
BAR
CHANGE
Setup
Chronometer
Active tool Nr.
DISPLAY
AREA
Accessing functions in MILL
mode:
Setup
Display mode:
INC/ABS
DISPLAY
Tool
Reference
Part datum
Inc/Abs
Bolt-hole drilling
mm/inch
Linear drilling
Set/Clear
Grid pattern drilling
Deg/DMS
Go to
Rad/Diam
Calculator
Tool setting
Part center
FUNCTION
Tool table
Accessing functions in LATHE mode:
Setup
Home search
TOOL
Set tool Nr.
Teach-in
Setup
DISPLAY
Tool table
FUNCTION
2/3 axes
Angle measurement
Inc/Abs
Turning
mm/inch
Threading
Rad/Diam
Calculator
Set/Clear
Accessing installation parameters:
Setup
Home search
FAGOR AUTOMATION S. COOP.
Bº San Andrés Nº 19
Apdo de correos 144
20500 Mondragón - España
Web: www.fagorautomation.com
Email: [email protected]
Tel: +34 943 719200
Fax: +34 943 791712
Setup
User
Language
Test
Color
Installer
Password
231202
DRO
Feedback
Compensation
(type, axes, alarms)
(encoders)
(linear, multi-point)