Roberts CHRONODAB User Guide

Roberts CHRONODAB User Guide
ROBERTS
DAB / DAB+ / FM RDS Digital Clock Radio with large display
Please read this manual before use
Contents
Controls ........................................................................... 2-3
Setting the clock manually ........................................... 22-23
Using the clock radio for the first time .................................4
To return to auto clock set mode .......................................24
Operating your clock radio...................................................5
Clock display .....................................................................24
Selecting a station - DAB.....................................................6
Display backlight dimmer...................................................25
Secondary services - DAB...................................................7
Software version ................................................................25
Display options - DAB...................................................... 7-8
Language function .............................................................26
Finding new stations - DAB .................................................9
System reset......................................................................27
Manual tuning - DAB .........................................................10
Headphone socket.............................................................28
Signal strength display - DAB ............................................10
USB socket (for software upgrades)..................................28
Dynamic Range Control (DRC) - DAB...............................11
Mains supply......................................................................29
Operating your radio - FM auto-tune .................................12
Cautions ............................................................................30
Manual tuning - FM............................................................13
Specifications ....................................................................30
Display options - FM ..........................................................14
Circuit features ..................................................................30
Presetting stations .............................................................15
Guarantee.............................................................Back page
Recalling a preset station ..................................................16
Setting the alarm times ................................................ 17-19
Cancelling alarms ..............................................................19
To view the alarm settings .................................................19
Snooze function .................................................................20
Sleep function ....................................................................21
1
Controls (Top)
4
5
2
1
6
7
8
11
10
9
3
1. Menu button
5. Sleep button
2. Tuning Down button
6. Select / Snooze button
10. Alarm 2 / Volume Down button
9. On / Standby button
3. Preset button
7. Info button
11. Mode button
4. Tuning Up button
8. Alarm 1 / Volume Up button
2
Controls (rear)
12
13
19
14
18
15
17
3
16
12. Loudspeaker
16. Mains lead
13. Alarm 1 switch
17. DAB / FM wire aerial
14. Alarm 2 switch
18. USB socket (for software upgrades)
15. Dimmer switch
19. Headphone socket
Using the clock radio for the first time
1. Place your clock radio on a flat surface.
2. Fully extend the wire aerial located on the rear of your clock radio.
Place the wire antenna so that it is as straight as possible extending
either above or below the radio.
3. Plug the mains lead into a standard 13 amp mains socket outlet. The
display will show 'ROBERTS' for a few seconds and will then show
'SET CLOCK'. During this time the radio is scanning to find a DAB
radio signal. After a short time the current time and day will appear
on the display.
4. If no signal is found, 'NO CLOCK' will be displayed. It may be necessary
to relocate your clock radio to a position giving better reception. You
should then carry out a scan to find stations as described on page 9.
IMPORTANT: The mains plug is used as the means of connecting the
clock radio to the mains supply. The mains socket used for the clock radio
must remain accessible during normal use. In order to disconnect the clock
radio from the mains completely, the mains plug should be removed from
the mains socket outlet completely.
Characters appearing on the LCD display indicate that the clock radio is
connected to and powered from the mains supply.
4
Operating your clock radio
1. Press the On / Standby button to switch on your clock radio.
When first switched on, the radio will be in DAB mode. After each use
the radio will remember the mode used and then switch on in that
mode the next time that it is used.
Standby
1
2. If the clock radio has been used before, the last used station will be
selected.
3. If this is the first time that the clock radio has been used a quick scan
of the Band III DAB channels may be carried out. (The scan is normally
performed automatically when the clock is first set page 4). If new radio
stations are found, they will be added to the stored list of stations.
4. When the scan is completed the first station (in numeric-alpha order
0...9, A...Z will be selected. The first station in the list of stations found
during scanning will be played. The display will show the station name.
5. If no signals are found then 'OFF AIR' will be displayed and it may
be necessary to relocate your clock radio to a position giving better
reception. You should then carry out a scan to find stations as described
on page 9.
•
Your clock radio has an indicator
on the display to indicate the
strength of the DAB radio signal being received.
Note: When first switched on, the radio will set the volume to a moderately
high level, in case the broadcast is very quiet. After you have set the volume
using the Volume Up or Down buttons, the radio will remember the setting
that you have applied for the next time that it is used.
5
Selecting a station - DAB
1. Press the On / Standby button to switch on your clock radio.
2. Press and release the Mode button until the DAB mode is selected.
The display will show the name of the radio station currently selected.
2
3. Press the Tuning Up or Down buttons to step through the list of
available stations.
4. When the desired station name appears on the display, press and
release the Select button to select the station. The display will show
'TUNING' while your radio finds the new station.
3
5. Adjust the Volume buttons to the required setting.
3
Note: If after selecting a station the display shows 'OFF AIR' it may be
necessary to relocate your radio to a position giving better reception.
4
5
5
6
Secondary services - DAB
1. Certain radio stations have one or more secondary services associated
with them. If a station has a secondary service associated with it then
the secondary service will then appear immediately after the primary
service as you press the Tuning Up button.
1
2. To tune to the secondary service, press and release the Select button.
Most secondary services do not broadcast continually and if the selected
service is not available, the radio will re-tune to the associated primary
service.
2
Display options - DAB
Your radio has a range of display options when in DAB mode:1. Press and release the Info button to cycle through the various options.
All display options except the text display will revert to the clock display
after about 10 seconds.
a. Date
a
1
Displays the current date.
b
b. Frequency and channel Displays frequency and channel number
for the currently tuned DAB station.
c. Bit rate
7
Displays the digital audio bit rate for the
currently tuned DAB station.
c
d. Signal error
Displays the bit error rate for the
currently tuned DAB station.
d
e. Station name
f. Scrolling text
g. Programme type
h. Multiplex Name
i. Time and day
Displays the station name being
listened to.
e
Displays scrolling text messages such
as artist/track name, phone in number,
etc.
f
Displays the type of station being
listened to e.g. Pop, Classic, News, etc.
g
Displays the name of the DAB multiplex
to which the current station belongs.
Displays the current time (24 hour clock)
and day of the week.
h
i
8
Finding new stations - DAB
From time to time, new DAB radio stations may become available. Or you
may have moved to a different part of the country. In this case you may
need to cause your radio to scan for new stations.
1. Press and release the Menu button.
1
2. Press the Tuning Up or Down buttons until the display shows 'SCAN'.
3. Press and release the Select button. Your radio will perform a scan
of the Band III DAB channels. As new stations are found, the station
counter on the right-hand side of the display will increase and stations
will be added to the list.
2
2
3
9
Manual tuning - DAB
Manual tuning allows you to tune your radio to a particular DAB frequency
in Band III. Any new stations found will be added to the station list. This
function can also be used to assist the positioning of the aerial or the clock
radio to optimise reception for a specific channel or frequency. Note that
UK DAB stations are located in the range of channels 11B to 12D.
1,3
1. Press and release the Menu button. The display will show 'MANUAL'.
Press and release the Select button to enter the manual tuning mode.
2. Press the Tuning Up or Down buttons to select the desired DAB
channel. Press and release the Select button to tune to the chosen
frequency.
3. If a signal is present, this will be indicated on a signal strength display.
The minimum signal marker ( ) shows the minimum signal strength
needed for good DAB reception. The signal indicator chevrons go up
or down showing the changing signal strength as you adjust the wire
aerial or your clock radio position. Press and release the Menu button
to return to the normal DAB tuning mode.
1,2
2
2
Signal strength display - DAB
1. Press and release the Select button to show the signal strength display.
The minimum signal marker ( ) shows the minimum signal strength
needed for good DAB reception. The signal indicator chevrons increase
or decrease showing the changing signal strength as you adjust the
wire aerial or your clock radio position.
1,2
2. Press and release the Select button to return to the normal radio
display.
10
Dynamic Range Control (DRC) - DAB
The DRC facility can make quieter sounds easier to hear when your radio
is used in a noisy environment.
There are three levels of compression:
DRC 0
2
No compression applied. (default)
DRC 1/2 Medium compression applied.
DRC 1
Maximum compression applied.
1. Press the On / Standby button to switch on your clock radio.
3
2. Press and release the Mode button until the DAB band is selected.
3. Press and release the Menu button.
4,5
4. Press the Tuning Up or Down buttons until 'DRC' appears on the
display. Press and release the Select button. The display will show
the current DRC value.
4,5
5. Press the Tuning Up or Down buttons to select the required DRC setting
(default is 0).
6. Press and release the Select button to confirm the setting. After several
seconds the display will return to the normal radio display.
4,6
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
11
Operating your radio - FM auto-tune
1. Fully extend the wire aerial located on the rear of your clock radio.
Place the wire antenna so that it is as straight as possible extending
either above or below the clock radio.
2. Press the On / Standby button to switch on your clock radio.
Standby
2,10
3. Press and release the Mode button until the FM band is selected.
4. Press and hold down the Tuning Up button for 2 - 3 seconds to cause
your radio to search from low frequency to high frequency and to stop
automatically when it finds a station of sufficient strength.
5. After a few seconds the display will update. The display will show the
frequency of the signal found. If the signal is strong enough and there
is RDS data present then the radio may display the station name.
3
4,6
6. To find other stations press and hold the Tuning Up button as before.
7. Press and hold down the Tuning Down button for 2 - 3 seconds to
cause your radio to search from high frequency to low frequency and
to stop automatically when it finds a station of sufficient strength.
7
8. When the end of the waveband is reached your radio will recommence
tuning from the opposite end of the waveband.
9
9. Adjust the Volume to the required setting.
9
10. To switch off your clock radio, press the On / Standby button.
12
Manual tuning - FM
1. Fully extend the wire aerial located on the rear of your clock radio.
Place the wire antenna so that it is as straight as possible extending
either above or below the clock radio.
2. Press the On / Standby button to switch on your clock radio.
Standby
2,7
3. Press and release the Mode button until the FM band is selected.
4. Press and release the Tuning Up or Down buttons to tune to a station.
The frequency will change in steps of 50kHz.
If the radio is tuned to a station of sufficient signal strength with RDS
information present, then the display may change to show the station
name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set the Volume to the desired setting.
3
4
4
7. To switch off your clock radio press the On / Standby button.
6
6
13
Display options - FM
Your radio has a range of display options for FM mode:The Radio Data System (RDS) is a system in which inaudible digital
information is transmitted in addition to the normal FM radio programme.
RDS offers several useful features. The following are available on your
clock radio.
a
1
1. Press and release the Info button to cycle through the various modes.
All display options except the text display will revert to the clock display
after about 10 seconds.
a. Date
Displays the current date.
b. Frequency
Displays the frequency of the station being
listened to.
c. Station name
Displays the name of the radio station being
listened to.
b
c
d
d. Scrolling text
Displays scrolling text messages such
as artist/track name, phone in number,
etc.
e. Programme type
Displays type of station being listened to
e.g. Pop, Classic, News, etc.
f. Time and day
Displays the current time and day
(24 hour clock format)
Note: If no RDS information is available, the radio will be unable to display
the station name, scrolling text and programme type information.
e
f
14
Presetting stations
You may store your preferred DAB and FM radio stations to the preset
station memories. There are 20 memory presets in your radio, 10 for
DAB and 10 for FM. Presets are remembered by your radio in the event
of a power failure.
Standby
1
The procedure for setting presets and using them to tune stations is the
same for FM and DAB modes, and is described below.
1. Press the On / Standby button to switch on the clock radio.
2. Press the Mode button to select the desired waveband.
2
3. Tune to the required station as previously described.
4. Press and release the Preset button. The display will show, for example,
'Empty 1' if no station has been stored to that preset.
5. Use the Tuning Up or Down buttons to select the desired preset
station number under which you wish to store the station.
6. Press and hold down the Preset button until the display shows, for
example, 'P1 SAVED'. The station will be stored under the chosen
preset. Repeat this procedure for the remaining presets.
7. Stations which have been stored in preset memories may be overwritten
by following the above procedure.
15
4,6
5
5
Recalling a preset station
1. Press the On / Standby button to switch on the clock radio.
2. Press the Mode button to select the desired waveband.
2
3. Press and release the Preset button. The display will show, for example,
'Empty 1' if no station has been stored to that preset. If a preset has
been stored, then the display will show either the station name (for
DAB stations) or the frequency (for FM stations).
3
4. Press the Tuning Up or Down buttons to select the desired preset
station.
5. Press and release the Select button. Your clock radio will tune to the
chosen preset station stored in the preset memory.
4
4
5
16
Setting alarm times
Your clock radio has two alarms which can be set to wake you to DAB,
FM radio or buzzer alarm. Each alarm can be set to sound once, daily,
on weekdays or at weekends. The alarms can only be set when your
clock radio is in standby.
Note: If no buttons are pressed for 10 seconds, your clock radio will exit
the alarm setup.
1
1. When your clock radio is in standby mode, press and release Alarm
1 or Alarm 2 buttons and the alarm hour digits will flash on the display.
1
2. Press the Tuning Up or Down buttons to choose the desired alarm
hour.
3. Press and release the Select button to enter the hour setting. The
alarm minute digits will flash on the display.
4. Press the Tuning Up or Down buttons to choose the desired alarm
minute.
2-6
2-6
5. Press and release the Select button to enter the minutes setting. The
alarm day option will flash on the display.
6. Press the Tuning Up or Down buttons to choose the desired alarm
day option:
Daily
17
- Will sound everyday
Once
- Will sound at one time only
Weekends
- Will sound only on weekends
Weekdays
- Will sound only on weekdays
3,5
•
If setting the alarm to once only, continue with step 7 below. Otherwise
skip to step 13 below.
7. Press and release the Select button to enter the setting. The alarm
year will flash on the display.
8. Press the Tuning Up or Down buttons to choose the alarm year.
7-13
9. Press and release the Select button to enter the alarm year setting.
The alarm month will flash on the display.
8-12
10. Press the Tuning Up or Down buttons to choose the alarm month.
11. Press and release the Select button to enter the alarm month setting.
The alarm day will flash on the display.
8-12
12. Press the Tuning Up or Down buttons to choose the alarm day.
13. Press and release the Select button to confirm the alarm settings.
'SAVED' will show on the display before exiting the alarm setup.
14. To enable the alarm set the Alarm 1 or Alarm 2 switch to the Buzz or
Radio position. If 'Off' is selected the alarm will be disabled.
14
symbol and the
Radio alarms are indicated in the display by the
corresponding alarm number. Buzzer alarms are indicated by the
symbol and the corresponding alarm number.
14
18
When your clock radio is set to wake by the radio alarm, your clock radio
will switch to the last used DAB or FM radio station. If the radio cannot
connect to the radio station, the buzzer alarm will be used instead.
The alarm volume will start from minimum and increase in level every few
seconds. The alarm will sound for 60 minutes unless cancelled.
Note: If the radio is switched on because of the radio alarm you can control
basic functions such as the volume.
Cancelling alarms
1. While an alarm is sounding it can be cancelled by pressing the
On / Standby button.
Standby
1
To view the alarm settings
1. Ensure your clock radio is in standby mode. Press and release Alarm
1 or 2 buttons to enter the alarm setup.
1
2. Press and release the Select button to cycle through each of the
settings for the chosen alarm.
You may use the Tuning Up and Down buttons to modify any particular
setting if desired, using the Select button to enter the modification.
1
2
19
Snooze function
1. When the radio or buzzer alarm sounds, press and release the Snooze
button. This will silence the alarm for the selected number of minutes.
The Snooze duration can be adjusted between 5 and 20 minutes in
5 minute increments. The default setting is 5 minutes.
When the Snooze button has been pressed during an alarm, the display
. This sequence can be repeated
will show the Snooze symbol
during the 60 minute alarm period.
1
2. To cancel the Snooze function, press the On / Standby button.
To set the snooze time
1. Press the On / Standby button to switch on the clock radio.
2. Press and release the Menu button.
2
3. Press the Tuning Up or Down buttons until 'CLOCK' appears on the
display. Press and release the Select button.
4. Press the Tuning Up or Down buttons until 'SNOOZE' appears on
the display. Press and release the Select button.
5. Press the Tuning Up or Down buttons to choose the desired snooze
setting from between 5, 10, 15 and 20 minutes.
3-5
3-5
6. Press and release the Select button to enter the desired snooze
duration. The clock radio will exit the menu options and return to the
normal radio display.
3-6
20
Sleep function
Your clock radio can be set to turn off after a preset time has elapsed.
The sleep setting can be adjusted between 5 and 90 minutes in 5 minute
increments. Ensure your clock radio is switched on.
1-6
1. When using your clock radio, press the Sleep button.
2. Repeatedly press the Sleep button to select the desired sleep time.
The sleep setting will increase in 5 minute increments from 5 minutes
up to 90 minutes. A further press will cause the sleep timer to be set
to OFF which will cancel the sleep function.
•
You may also use the Tuning Up or Down buttons to set the correct
Sleep setting in step 2.
3. The display will exit the sleep options. The sleep symbol
on the display.
will show
4. Your clock radio will switch off after the preset sleep time has
elapsed.
Standby
5. To cancel the sleep timer and switch off your radio before the chosen
sleep time has elapsed, press the On / Standby button.
To cancel the sleep timer without switching off your clock radio,
repeatedly press the Sleep button until 'OFF' is selected.
6. When the sleep time has been set you may view the remaining sleep
time. Press the Sleep button. The remaining sleep time will show on
the display.
21
5
Setting the clock manually
Normally your clock radio will set its clock automatically using the DAB
radio signal. If no DAB signal is available and you need to set the time
manually, please follow the procedure shown below.
1. Press the On / Standby button to switch on the clock radio.
2
2. To set the clock time, press and release the Menu button to enter the
setup menu.
3. Press the Tuning Up or Down buttons until 'CLOCK' appears on the
display. Press and release the Select button.
3-8
4. Press the Tuning Up or Down buttons until 'MANU CLK' appears on
the display.
3-8
5. Press and release the Select button to enter the manual setting
procedure. The hour digits will then flash on the display.
6. Press the Tuning Up or Down buttons to set the desired hour.
3-7
7. Press and release the Select button to enter the hour setting.
8. The minute digits will then flash on the display. Press the Tuning Up
or Down buttons to set the desired minute.
22
9. Press and release the Select button to enter the minutes setting. The
year will then flash on the display.
10. Press the Tuning Up or Down buttons to change the year as needed.
11. Press and release the Select button to enter the year setting. The
month will then flash on the display.
9-15
12. Press the Tuning Up or Down buttons to select the current month.
13. Press and release the Select button to enter the month setting. The
day in the month will then flash on the display.
10-14
14. Press the Tuning Up or Down buttons to select the current day.
10-14
15. Press and release the Select button to confirm the time setting. 'SAVED'
will show on the display before exiting the clock setup.
23
To return to auto clock set mode
1. Press the On / Standby button to switch on the clock radio.
2. Press and release the Menu button to enter the setup menu.
3. Press the Tuning Up or Down buttons until 'CLOCK' appears on the
display. Press and release the Select button.
4. Press the Tuning Up or Down buttons until 'AUTO CLK' appears on
the display. Press and release the Select button.
2
3,4
5. The radio will set its time according to the information received with
the DAB broadcast when the radio is tuned to a DAB station.
3,4
3,4
Clock display
1. When your clock radio is in standby mode the time and day will be
displayed. The time is always shown using a 24 hour clock format.
24
Display backlight dimmer
The brightness of the display can be adjusted when the radio is in standby
or when the unit is in use.
1. In order to adapt the intensity of the display to suit the ambient room
lighting, switch the Dimmer switch located on the left hand side of
your clock radio to select the dimmer brightness from High, Medium
and an almost off 'night-time' (Low) setting.
1
2. When the clock radio is in standby mode, pressing a button will cause
the radio to switch to the normal brightness level for a few seconds.
This is so that even if the standby brightness level is set to low (almost
off), it is still possible to see the time by quickly pressing a button.
Software version
The software display cannot be altered and is just for your reference.
Ensure your clock radio is switched on.
1,4
1. Press and release the Menu button.
2. Press the Tuning Up or Down buttons until 'SW VER' appears on
the display.
2
3. Press and release the Select button. The display shows the software
information.
2
4. Press and release the Menu button to exit the software display.
25
3
Language function
Your clock radio can be configured to a different language. Ensure your
clock radio is switched on.
1. Press and release the Menu button.
1
2. Press the Tuning Up or Down buttons until 'LANGUAGE' appears
on the display.
3. Press and release the Select button to enter the language adjustment
menu.
4. Press the Tuning Up or Down buttons until your desired language
appears on the display.
2,4
2,4
5. Press and release the Select button to confirm your choice. The display
will change to the chosen language.
3,5
26
System reset
If your clock radio fails to operate correctly, or some digits on the display
are missing or incomplete carry out the following procedure.
Standby
1. Press the On / Standby button to switch on the clock radio.
1
2. Press and release the Menu button.
3. Press the Tuning Up or Down buttons until 'FACTORY' appears on
the display. Press and release the Select button.
2
4. A full reset will be performed. The station list and presets will be erased.
Alarms will be cancelled and snooze and sleep timer settings will be
set to their default values. The display will show 'ROBERTS' and after
a short time the current time and day will appear on the display.
3
5. See "Operating your clock radio" on page 5 for further details.
In case of malfunction due to electrostatic discharge, reset the product
as above to resume normal operation. If you are not able to perform the
reset operation as above, removal and reconnection of the power supply
may be required.
3
3
27
Headphone socket
A 3.5mm Headphone Socket located on the rear of your clock radio is
provided for use with either headphones or an earpiece. Inserting a plug
automatically mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We
therefore recommend setting the volume to a low level before connecting
headphones to the clock radio.
IMPORTANT: Excessive sound pressure from earphones and headphones
can cause hearing loss.
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
USB socket for software upgrade
In the event that any software update is made available for your radio,
information on how to update your radio will be made available via our
website at http://www.robertsradio.com
28
Mains supply
The ChronoDAB will operate from a supply of AC 230 volts,
50Hz
only.
The wire coloured BLUE must be connected to the terminal marked N or
coloured BLACK.
DO NOT cut off the mains plug from this equipment. If the plug fitted is
not suitable for the power points in your home or the cable is too short to
reach a power point, then obtain an appropriate safety approved extension
lead or adaptor. If in doubt consult your dealer.
The wire coloured BROWN must be connected to the terminal marked L
or coloured RED.
If nonetheless the mains plug is cut off, remove the fuse and dispose of
the plug immediately to avoid a possible shock hazard by inadvertent
connection to the mains supply.
If this product is not supplied with a mains plug, or one has to be fitted,
then follow the instructions given below:
IMPORTANT. DO NOT make any connection to the larger terminal which
or coloured
is marked with the letter E or by the safety earth symbol
Green or Green-and-Yellow.
The wires in the mains lead are coloured in accordance with the following
codes :BLUE - NEUTRAL
BROWN - LIVE
Fuse
When replacing the fuse only a 3A ASTA approved to BS1362 type should
be used and be sure to re-fit the fuse cover.
IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN.
29
Cautions
Do not allow this clock radio to be exposed to water, steam or sand. Do not
leave your clock radio where excessive heat could cause damage such as
in a parked car where the heat from the sun can build up even though the
outside temperature may not seem too high. It is recommended that the
DAB band be used wherever possible as better results in terms of quality
and freedom from interference will usually be obtained than on the FM band.
•
•
Your clock radio should not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed on
the clock radio.
•
It is recommended to operate the product such that there is a minimum
distance (10cm recommended) to adjacent objects in order to ensure
good ventilation.
•
The ventilation of the product should not be restricted by covering it or
its ventilation openings with items such as newspapers, tablecloths,
curtains etc.
•
No naked flame sources such as lighted candles should be placed on
the product.
•
It is recommended to avoid using or storing the product at extremes
of temperature. Avoid leaving the unit in cars, on window sills, in direct
sunlight etc.
•
The product must be used in a moderate climate.
The name plate is located underneath the unit.
Specifications
Circuit Features
Power Requirements
Mains
AC 230 volts,
Loudspeaker
76 mm
Output Power
1 Watt
Headphone socket
3.5mm dia
50 Hz
Frequency Coverage
FM
87.5-108MHz
DAB
174.928 - 239.200MHz
Aerial System
FM
Wire aerial
DAB
Wire aerial
The Company reserves the right to amend the specification without notice.
30
Guarantee
This product is guaranteed for twenty four months from the date of purchase by the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced
free of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Product with removed or defaced serial numbers.
Procedure:
Any claim under this guarantee should be made through the dealer from whom the product was purchased. It is likely that your Roberts dealer will be
able to attend to any defect quickly and efficiently, but should it be necessary the dealer will return the product to the company’s service department
for attention. In the event that it is not possible to return the product to the Roberts dealer from whom it was purchased, please contact Roberts Radio
using the contact details on the www.robertsradio.com website.
For product repairs falling outside the guarantee period, please refer to the “customer care” tab on the www.robertsradio.com website.
These statements do not affect the statutory rights of a consumer.
ROBERTS RADIO LIMITED
PO Box 130
Mexborough
South Yorkshire
S64 8YT
Website: http://www.robertsradio.com
Issue 4
© 2016 Roberts Radio Limited
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement