Lanier PJ WX4152N Read This First

Add to My manuals
24 Pages

advertisement

Lanier PJ WX4152N Read This First | Manualzz

Read This First

Safety Information for This Machine

Information for This Machine

Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in this manual before using the machine.

TABLE OF CONTENTS

How to Read This Manual ................................................................................................................................ 2

Introduction.....................................................................................................................................................2

Disclaimer........................................................................................................................................................2

Notes...............................................................................................................................................................2

1. Safety Information for This Machine

Safety Symbols for This Machine...................................................................................................................... 3

Safety Information...............................................................................................................................................4

Safety During Operation............................................................................................................................... 4

Safety Precautions to Be Followed................................................................................................................4

Safety Labels of This Machine.........................................................................................................................14

Positions of WARNING and CAUTION Labels........................................................................................14

Power Switch Symbols.................................................................................................................................15

2. Information for This Machine

Laws and Regulations...................................................................................................................................... 17

CE Marking Traceability Information (For EU Countries Only)............................................................... 17

Notice to Users in EEA Countries................................................................................................................17

Overseas Affiliates and Noise Emission Information................................................................................ 17

User Information on Electrical and Electronic Equipment.........................................................................18

Note for the Battery and/or Accumulator Symbol (For EU countries only)............................................18

Notes to Users in Australia and New Zealand (for RICOH PJ WX4152NI)......................................... 19

1

2

How to Read This Manual

Introduction

This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.

Disclaimer

In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.

Notes

Contents of this manual are subject to change without prior notice.

Some illustrations in this manual might be slightly different from the machine.

The manufacturer shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the manufacturer with your office products.

1. Safety Information for This Machine

This chapter describes safety information for this machine.

Safety Symbols for This Machine

The meanings of the safety symbols for this machine are as follows:

Caution

Do not touch

Caution, hot surface

3

4

1. Safety Information for This Machine

Safety Information

Safety During Operation

In this manual, the following important symbols are used:

Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.

Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.

Safety Precautions to Be Followed

This section explains safety precautions that should always be followed when using this machine.

Environments where the machine can be used

This section explains safety precautions about environments where the machine can be used.

• Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding water or any other liquids, on or close to this machine. Fire or electric shock could result from spillage or if such objects or substances fall inside this machine.

• Do not use flammable sprays or solvents in the vicinity of this machine. Also, avoid placing these items in the vicinity of this machine. Doing so could result in fire or electric shock.

• Keep the machine and attachments out of the reach of children. If the machine is near children, it may cause injury.

• Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.

• Do not place any objects on the machine. Doing so may cause the machine to topple over, possibly resulting in injury.

Safety Information

• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.

• Do not place the machine or use it in an environment where it might get wet such as from snow, rain, or being near water. Doing so could result in fire or electric shock.

• Do not put your face or hand near the exhaust vents. Doing so could result in burns or an accident due to hot air coming from the exhaust vents.

• Do not use the machine on soft material such as paper or cloth that might get sucked into the intake vents. Doing so may cause heat buildup inside the machine, resulting in malfunction, burns, or fire.

• Do not place the machine in a location where air flow is poor. Doing so may cause fire due to internal components becoming overheated.

• Do not place or store the machine in a location where direct sunlight or heat generation might occur. The heat may deform or wear out the exterior parts or negatively affect internal parts.

Doing so could result in fire.

• Do not place low heat resistant material near the exhaust vents. Hot air may come from the exhaust vents, resulting in damage to the machine or an accident.

• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.

Handling power cords and power cord plugs

This section explains safety precautions about handling power cords and power cord plugs.

• Do not use any power sources other than those that match the specifications shown in this manual. Doing so could result in fire or electric shock.

• Do not damage, break, or modify the power cord. Also, do not place heavy objects on the power cord, or pull the cord or bend it severely. Doing so could result in fire or electric shock.

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and electric shock hazard.

5

6

1. Safety Information for This Machine

• The supplied power cord is for use with this machine only. Do not use it with other appliances.

Doing so could result in fire or electric shock.

• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric shock.

• Be sure to disconnect the plug from the wall outlet at least once a year and check for the following:

• There are burn marks on the plug.

• The prongs on the plug are deformed.

• If any of the above conditions exist, do not use the plug and consult your dealer or service representative. Use of the plug could result in fire or electric shock.

• Be sure to disconnect the power cord from the wall outlet at least once a year and check for the following:

• The power cord's inner wires are exposed, broken, etc.

• The power cord's coating has a crack or dent.

• When bending the power cord, the power turns off and on.

• Part of the power cord becomes hot.

• The power cord is damaged.

• If any of the above conditions exist, do not use the power cord and consult your dealer or service representative. Use of the power cord could result in fire or electric shock.

• Do not use the connection cable if it is deformed, cracked, or damaged. Doing so could result in fire or electric shock. If the connection cable is deformed, cracked, or damaged, contact your service representative to request a replacement cable.

• When using an extension cord or power strip, only connect equipment whose total power consumption is within the power rating for the extension cord or power strip. If the power rating is exceeded, it may cause heat buildup and result in fire.

• Push the power plug all the way into the power outlet. Do not use a power outlet with a loose connection. Doing so may result in heat buildup. Plug the power cord in the correct direction into the base. If they are not plugged in correctly, it could result in smoke, fire, or electric shock.

• If this machine is not going to be used for several days or longer at a time, disconnect its power cord from the wall outlet.

Safety Information

• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.

Pulling the cord can damage the power cord. Use of damaged power cords could result in fire or electric shock.

• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

• When performing maintenance on the machine, always disconnect the power cord from the wall outlet.

• Do not place the power cord and connection cable in a way that might cause someone to trip and fall. The machine might fall over and cause an injury.

• Power Source

220–240 V, 1.7A or more, 50/60Hz

120 V, 3.7A or more, 60Hz

Please be sure to connect the power cord to a power source as above.

For users in Norway, this product is also designed for an IT power distribution system with phase-tophase voltage of 230V.

Handling the main machine

This section explains safety precautions about handling the main machine.

• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy disconnection of the power cord in the event of an emergency.

• If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem. Do not use the machine. Doing so could result in fire or electric shock.

• If metal objects, or water or other fluids fall inside this machine, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem. Do not use the machine. Doing so could result in fire or electric shock.

• Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could result in electric shock.

7

8

1. Safety Information for This Machine

• The following explains the warning messages on the plastic bag used in this product's packaging.

• Keep the polythene materials (bags, etc.) supplied with this machine away from babies and small children at all times. Suffocation can result if polythene materials are brought into contact with the mouth or nose.

• If the machine topples, or if a cover or other part gets broken, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem. Do not use the machine. Doing so could result in fire or electric shock.

• The machine may be very hot after it is turned off, especially the vents and the lower part of the unit where the lamp is located. Avoid touching these areas. Doing so may result in burns.

• Do not place the machine on other equipment or vice versa. Doing so may cause heat buildup inside the machine or cause the other equipment to malfunction.

• Do not increase the volume unless you are listening while increasing the volume. Also, lower the volume before turning off the power, because a loud sound may be emitted when the power is turned on and cause hearing damage.

Handling the machine's interior

This section explains safety precautions about handling the machine's interior.

• Do not remove any covers or screws that are not mentioned in this manual. There are high voltage components inside the machine that may cause electric shock. Contact your service representative if any of the machine's internal components require maintenance, adjustment, or repair.

• Do not disassemble or modify the machine. Doing so may cause injury or malfunction.

• If the machine's interior is not cleaned regularly, dust will accumulate. Fire and breakdown can result from heavy accumulation of dust inside this machine. Contact your sales or service representative for details about and charges for cleaning the machine's interior.

Safety Information

Installing and fixing the projector on a wall or ceiling

• For safe operation, follow the warnings below when installing and fixing the projector a wall or ceiling.

• Do not attempt to clean or replace parts for a machine. Doing so may cause it to fall down, resulting in an injury.

• Do not open the lamp cover of a machine. Doing so may cause the lamp cover to fall down. If the lamp is broken, pieces of glass may fall and cause an injury.

• Contact your sales or service representative to clean or replace parts for a machine.

• If a machine is incorrectly installed on a wall or ceiling, it may fall down and cause an injury.

Contact your sales or service representative if you want to install a machine on a wall or ceiling.

• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.

For users

• Do not install the projector by yourself. Contact your sales or service representative if you want to install the projector on a wall or ceiling.

For sales or service representatives

• Use brackets that are strong enough to support the projector. The projector weighs about 3.0

kg (6.7 lb.).

• The projector must be installed in a location that is sturdy enough to support the full weight of the projector and brackets.

• Use only the screws (three M4×16 screws) provided with the projector to attach the brackets to the projector.

• Use all three of the projector's screw holes to attach the brackets. The locations of the screw holes are shown in the illustration below. Make sure that the screws are tightened firmly.

9

1. Safety Information for This Machine

10

CZE130

About the batteries

Explains things that you should follow in regard to the batteries.

• For safe operation, follow the warnings below regarding the batteries. If you use the batteries incorrectly, it may result in fire or injury due to batteries leaking or exploding.

• Do not use batteries other than the ones specified.

• Do not mix and use batteries that are different types or that are new and old.

• Correctly insert batteries according to the polarity ( / ).

• Do not charge non-rechargeable batteries.

• Do not heat or throw the batteries into fire or water.

• Do not connect the positive and negative terminals on a battery with a wire.

• Remove the batteries that are past their suggested use period or that are depleted.

• Remove the batteries when they will not be used for extended periods.

• Keep the batteries out of the reach of children. Children may swallow or choke on the batteries. If this happens, contact a doctor immediately.

• Risk of explosion if battery is replaced by an incorrect type. Please dispose of used rechargeable batteries correctly at your local community waste collection/recycling center.

What to do if a battery has leaked

• If leakage from a battery adheres to your skin, rinse it with water immediately, and then contact a doctor.

• Wipe off the leakage with tissue paper while being careful not to touch it.

• Soak the tissue paper that you used in water, and then throw it away as burnable trash.

Safety Information

About the lamp

Explains things that you should follow in regard to the lamp.

• Do not look into the projection window or vent when the machine is on. The bright light may damage your eyes. Be especially careful in an environment with children.

• Do not stare at operating lamp. May be harmful to the eyes.

• Before replacing the lamp, turn off the power and wait at least one hour to allow the machine to cool completely. If it is not completely cool, you may burn or injure yourself due to the inside of the machine and lamp unit being hot. If you replace the lamp without unplugging the power cord from the power outlet, electric shock or explosion may occur.

• Be careful when handling the used lamp so that it does not break. If it breaks, it may cause injury.

• The machine's light uses a mercury vapor lamp that becomes high pressure when it is turned on.

The lamp has the following characteristics, so be sure to handle it with care after understanding the contents. If the lamp explodes and you are either injured from broken pieces of glass, think you have gotten glass particles or mercury vapour in your eyes, or have inhaled glass particles or mercury vapour, contact a doctor immediately.

• Deterioration or shock can cause the lamp's life span to end or the lamp to explode. If the lamp explodes, it may make a big noise.

• The time that it takes for the lamp to reach its life span or explode depends on each individual lamp and its operating conditions. It is possible that it might explode the first time it is used.

• If you use the lamp past its replacement period, the possibility of explosion increases.

• If the lamp explodes, broken glass pieces may be scattered around the inside of the machine and ejected from the vent or other opening.

• If the lamp explodes, a very small amount of mercury vapor in the lamp tube and broken glass pieces may be ejected from the vents or other opening.

• Do not block the projection light when it is on. If you do so, the part that is blocking the projection light may get quite hot and deform, deteriorate or cause a burn or fire. The reflected light may make the projection window hot and cause a machine failure. To temporarily suspend projection, select the AV mute function. To suspend longer, turn off the machine.

• Be sure to always use a dedicated replacement lamp that is new when replacing the lamp. If you use a lamp that is not dedicated, it may result in an explosion and injury.

11

12

1. Safety Information for This Machine

What to do if a lamp has exploded

• If the lamp explodes, remove the power cord from the projector, leave the room while making sure it is thoroughly ventilated.

• If the lamp explodes and you think that you have gotten glass particles or mercury vapor in your eyes or have inhaled either, contact a doctor immediately.

• Clean up the area around the projector completely while being careful not to get injured from any broken glass pieces.

• Throw away any food that was near the projector.

• Ask your service representative to replace the lamp and inspect the projector.

Handling a Wireless LAN

This section explains safety precautions about handling a wireless LAN.

• Before using a wireless LAN, make sure there is nobody with a pacemaker nearby. This machine may cause pacemakers to malfunction due to electromagnetic interference.

• Before using a wireless LAN, make sure there is no medical equipment nearby. This machine may cause medical equipment to malfunction due to electromagnetic interference.

• Before using a wireless LAN, make sure there are no limitations or restrictions in the place you will be using it. There may be restricted use in places such as medical facilities due to electromagnetic interference.

• Do not use a wireless LAN if there is electromagnetic interference from other equipment. Doing so may cause an accident due to the other equipment malfunctioning from the electromagnetic interference.

Handling the Computer USB Adapter (RICOH PJ WX4152NI only)

This section explains safety precautions about handling the computer USB adapter.

• Keep computer USB adapter out of reach of children. If a child accidentally swallows a computer USB adapter, consult a doctor immediately.

Moving

This section explains safety precautions about moving the machine.

Safety Information

• Unplug the power cord from the wall outlet before you move the machine. While moving the machine, take care that the power cord is not damaged under the machine. Failing to take these precautions could result in fire or electric shock.

13

1. Safety Information for This Machine

Safety Labels of This Machine

Positions of WARNING and CAUTION Labels

This machine has labels for WARNING and CAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated.

14

1

DPE129

1

DPE130

Do not look into the projection window when the projector is on. The bright light may damage your eyes.

Do not place anything on the projection window. The object may become very hot and cause a fire or burn. To blank the image temporarily, turn on the AV mute function.

Safety Labels of This Machine

2

3

CZE107

2

CZE155

Do not touch ! Surface may be very hot.

3

CZE124

To replace the lamp, first unplug the power cord then wait for more than 1 hour. The lamp might be broken. Be careful of pieces of broken glass.

Power Switch Symbols

The meanings of the symbols for the switches on this machine are as follows:

• : STANDBY

15

16

1. Safety Information for This Machine

2. Information for This Machine

This chapter describes laws and regulations related to this machine.

Laws and Regulations

CE Marking Traceability Information (For EU Countries Only)

Manufacturer:

Ricoh Co., Ltd.

3-6 Nakamagome 1-chome, Ohta-ku, Tokyo. 143-8555, Japan

Importer:

Ricoh Europe PLC

20 Triton Street, London. NW1 3BF, United Kingdom

Notice to Users in EEA Countries

Declaration of Conformity

Notice to Users in EEA Countries

This product complies with the essential requirements and provisions of Directive 1999/5/EC of the

European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity.

The CE Declaration of Conformity is available on the Internet at

URL: http://www.ricoh.co.jp/fax/ce_doc/

Overseas Affiliates and Noise Emission Information

In accordance with “UL-EU Symbol” requirements, details of the EU office or representative company are given below.

Overseas Affiliates

Ricoh Europe PLC

20 Triton Street, London. NW1 3BF, United Kingdom

17

2. Information for This Machine

Noise Emission

Maschinenlärminformations-Verordnung 3. GPSGV:

Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779

User Information on Electrical and Electronic Equipment

Users in the countries where this symbol shown in this section has been specified in national law on collection and treatment of E-waste

Our Products contain high quality components and are designed to facilitate recycling.

Our products or product packaging are marked with the symbol below.

The symbol indicates that the product must not be treated as municipal waste. It must be disposed of separately via the appropriate return and collection systems available. By following these instructions you ensure that this product is treated correctly and help to reduce potential impacts on the environment and human health, which could otherwise result from inappropriate handling. Recycling of products helps to conserve natural resources and protect the environment.

For more detailed information on collection and recycling systems for this product, please contact the shop where you purchased it, your local dealer or sales/service representatives.

All Other Users

If you wish to discard this product, please contact your local authorities, the shop where you bought this product, your local dealer or sales/service representatives.

Note for the Battery and/or Accumulator Symbol (For EU countries only)

18

In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex II, the above symbol is printed on batteries and accumulators.

Laws and Regulations

This symbol means that in the European Union, used batteries and accumulators should be disposed of separately from your household waste.

In the EU, there are separate collection systems for not only used electrical and electronic products but also batteries and accumulators.

Please dispose of them correctly at your local community waste collection/recycling centre.

Notes to Users in Australia and New Zealand (for RICOH PJ WX4152NI)

Model Number:

RICOH PJ WX4152NI

This device complies with Radiocommunications requirements.

19

MEMO

20 Y0A1-7512

© 2015 Ricoh Co., Ltd.

EN GB EN AU Y0A1-7512

advertisement

Related manuals