Fujitsu ASHG14LUCA Operation Manual

Fujitsu ASHG14LUCA Operation Manual
English
Deutsch
Français
OPERATING MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE FUNCIONAMIENTO
MANUALE DI ISTRUZIONI
ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ
MANUAL DE FUNCIONAMENTO
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
KULLANIM KILAVUZU
Türkçe
Русский
Português
Ελληνικά
Italiano
Español
AIR CONDITIONER
Wall Mounted Type
KEEP THIS MANUAL FOR FUTURE REFERENCE
BEWAHREN SIE DIESES HANDBUCH ZUM SPÄTEREN NACHSCHLAGEN AUF
CONSERVEZ CE MANUEL POUR RÉFÉRENCE ULTÉRIEURE
CONSERVE ESTE MANUAL PARA FUTURA REFERENCIA
CONSERVARE IL PRESENTE MANUALE PER FUTURE CONSULTAZIONI
ΦΥΛΑΞΤΕ ΤΟ ΕΓΧΕΙΡΙΔΙΟ ΓΙΑ ΜΕΛΛΟΝΤΙΚΗ ΑΝΑΦΟΡΑ
GUARDE ESTE MANUAL PARA REFERÊNCIA FUTURA
ХРАНИТЕ РУКОВОДСТВО ДЛЯ СПРАВОК В БУДУЩЕМ
BU KILAVUZU İLERİDE BAŞVURMAK ÜZERE SAKLAYIN
[Original instructions]
PART No. 9319356112-02
9319356112-02_OM.indb 1
U
2016/2/25 21:09:54
PART No. 9319356112-02
OPERATING MANUAL
WALL MOUNTED TYPE
CONTENTS
OUTDOOR UNIT LOW NOISE OPERATION .....En-10
MANUAL AUTO OPERATION .............................En-10
ON/OFF TIMER OPERATION ............................. En-11
PROGRAM TIMER OPERATION ........................En-12
SLEEP TIMER OPERATION ...............................En-13
WEEKLY TIMER OPERATION ............................En-14
CLEANING AND CARE .......................................En-18
TROUBLESHOOTING ........................................En-20
OPERATING TIPS...............................................En-21
SAFETY PRECAUTIONS......................................En-1
FEATURES AND FUNCTIONS .............................En-2
NAME OF PARTS .................................................En-3
PREPARATION .....................................................En-5
OPERATION..........................................................En-6
ADJUSTING THE DIRECTION OF
AIR CIRCULATION ...............................................En-8
SWING OPERATION ............................................En-8
POWERFUL OPERATION ....................................En-9
ECONOMY OPERATION ......................................En-9
10 °C HEAT OPERATION ...................................En-10
SAFETY PRECAUTIONS
● To prevent personal injury, or property damage, read this section carefully before you use this product, and be sure to
comply with the following safety precautions.
● Incorrect operation due to failure to follow the instructions may cause harm or damage, the seriousness of which is classified as follows:
WARNING
This mark indicates procedures which, if improperly performed, might lead to the
death or serious injury of the user or service personnel.
CAUTION
This mark indicates procedures which, if improperly performed, might possibly result in personal harm to the user, or damage to property.
WARNING
● This product contains no user-serviceable parts. Always
consult authorized service personnel for repairing, installation, and relocation of this product.
Improper installation or handling will cause leakage, electric shock, or fire.
● In the event of a malfunction such as burning smell,
immediately stop operation of the air conditioner, and
disconnect all the power supply by turning off the electrical breaker or disconnecting the power plug. Then consult
authorized service personnel.
● Take care not to damage the power supply cable.
If it is damaged, it should only be replaced by authorized
service personnel.
● In the event of refrigerant leakage, be sure to keep away
from fire or any flammables, and consult authorized service personnel.
● In the event of a thunder storm or any prior sign of a
lightning strike, turn off the air conditioner via the remote
controller, and refrain from touching the product or the
power source to prevent any electrical hazards.
● This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
● Do not start or stop the operation of this product by inserting or pulling out the power plug, or by turning on or off the
circuit breaker.
● Do not use flammable gases near this product.
● Do not expose yourself directly to the cooling airflow for
many hours.
● Do not insert your fingers or any other objects into outlet
port, open panel, or intake grille.
● Do not operate with wet hands.
CAUTION
● Provide occasional ventilation during use.
● Always operate this product with air filters installed.
● Ensure that any electronic equipment is at least 1 m (40
in) away from either the indoor unit or outdoor unit.
● Disconnect all the power supply when you are not using
this product for extended periods.
● After a long period of use, ensure to get the mounting of
the indoor unit checked to prevent this product from falling
down.
● The airflow direction and the room temperature should be
carefully considered when you use this product in a room
with infants, children, elderly or sick persons.
● Do not direct the airflow at fireplaces or heating apparatus.
● Do not block or cover the intake grille and the outlet port.
● Do not apply any heavy pressure to radiator fins.
● Do not climb on, place objects on, or hang objects from
this product.
● Do not place any other electrical products or household
belongings under this product.
Dripping condensation from this product might get them
wet, and may cause damage or malfunction of your property.
● Do not expose this product directly to water.
● Do not use this product for preservation of food, plants,
animals, precision equipment, art work, or other objects.
This may cause quality deterioration of those items.
● Do not expose animals or plants to the direct airflow.
● Do not drink the drainage from the air conditioner.
● Do not pull the power supply cable.
● Do not touch the aluminum fins of heat exchanger builtin this product to avoid personal injury when you maintain
the unit.
En-1
9319356112-02_OM.indb 1
2016/2/25 21:09:54
FEATURES AND FUNCTIONS
■ Energy saving and Comfortable function
INVERTER
At the start of operation, large amount of power is used to
bring the room quickly to the desired temperature. Afterward,
the air conditioner automatically switches to a low power setting for economic and comfortable operation.
ECONOMY OPERATION
When ECONOMY operation mode is operated, the room temperature will be little higher than the set-temp under cooling
mode and lower than set-temp under heating mode. Therefore,
the ECONOMY mode is able to save more energy than other
normal mode.
SWING OPERATION
The Airflow Direction Louvers swings automatically up and
down so that the air speeds to every nook and corner of your
room.
AUTO CHANGEOVER
The operation mode (cooling, dry, heating) is switched automatically to maintain the set temperature, and the temperature
is kept constant at all times.
SUPER QUIET OPERATION
The indoor unit’s airflow is reduced to produce quieter operation.
10 °C HEAT OPERATION
The room temperature can be maintained at 10 °C so as to
prevent the room temperature from falling too far.
OUTDOOR UNIT LOW NOISE OPERATION
OUTDOOR UNIT LOW NOISE operation mode reduces the
noise level of the outdoor unit by suppressing the fan speed
and the rotation number of the compressor. It is effective when
the surrounding area is quiet, such as in the night.
*This function cannot be used for the Multi-type air conditioner.
■ Convenient function
WEEKLY TIMER
The combination of the temperature setting and the timer function, which you can choose any day between Monday and
Sunday, can be set freely.
You can set up to four ON Timers or OFF Timers in one day.
POWERFUL OPERATION
The product will operate at maximum power, which is convenient when you want to quickly cool down or warm up the
room.
■ Clean function
APPLE-CATECHIN FILTER
The APPLE-CATECHIN FILTER uses static electricity to clean
fine particles and dust in the air such as tobacco smoke and
plant pollen that are too small to see.
Note that when the Air Cleaning Filter is installed, the amount
of air produced decreases, causing a slight decrease in the
indoor unit’s performance.
ION DEODORIZATION FILTER
The filter deodorizes by powerfully decomposing absorbed
odors using the oxidizing and reducing effects of ions generated by the ultra-fine-particle ceramic.
■ Remote controller
WIRELESS REMOTE CONTROLLER
The Wireless Remote Controller allows convenient control of
indoor unit operation.
WIRED REMOTE CONTROLLER (OPTION)
The optional wired remote controller can be used. When you
use remote controller, there are following different points as
compared with using wireless remote controller.
And you can use both wired and wireless remote controller simultaneously. (But function is limited)
When the restricted functions on the remote controller are
used, beeping sound will be heard, OPERATION, TIMER and
the 3rd lamp of the indoor unit will flash.
[The restricted functions for wireless ones]
• 10°C HEAT OPERATION
• OUTDOOR UNIT LOW NOISE OPERATION
• WEEKLY TIMER
• ON/OFF TIMER
• PROGRAM TIMER
• SLEEP TIMER
• POWERFUL OPERATION
PROGRAM TIMER
The program timer allows you to integrate OFF timer and ON
timer operations in a single sequence. The sequence can
involve 1 transition from OFF timer to ON timer, or from ON
timer to OFF timer, within a 24 hour period.
SLEEP TIMER
When the SLEEP button is pressed during Heating mode, the
indoor unit’s temperature setting is gradually lowered during
the period of operation; during cooling mode, the temperature
setting is gradually raised during the period of operation. When
the set time is reached, the indoor unit automatically turns off.
En-2
9319356112-02_OM.indb 2
2016/2/25 21:09:55
NAME OF PARTS
INDOOR UNIT
Open Panel
Intake Grille
● Before starting operation, make sure that
the intake grille has
been shut completely.
(See page 18.)
Incomplete closing of
the intake grille might
have an effect on the
proper working or
performance of the air
conditioner.
It opens at the same time of operation, and shuts when operation stops.
● Please do not touch by hand or put
your finger into it during the open
panel opening/shutting operation. Or
your finger might be injured.
● Please do not move the open panel
by hand. It may cause breakdown,
vapor may condense near the outlet louvers and drops of water may
drip from it if you move it forcibly.
● Please do not hang objects on
open panel, or put objects into the
panel while it is open. It causes
breakdown.
Right-Left Louver
(behind Airflow Direction Louver)
Indicator
Remote Control Signal Receiver & MANUAL AUTO button
● When the battery in remote control is dead or the remote control is lost, press the
MANUAL AUTO button can resume emergency operation.
● When the MANUAL AUTO button is pressed in for more than 10 seconds, the forced
cooling operation will start.
● The forced cooling operation is used at the time of installation.
Only for authorized service personnel’s use.
● When the forced cooling operation starts by any chance, press the START/STOP butto stop the operation.
ton
OPERATION Indicator Lamp (green)
Lights during the normal operation, and flashes slowly during the Automatic Defrosting operation.
TIMER Indicator Lamp (orange)
If the TIMER indicator lamp flashes when the timer is operating, it indicates that a fault has occurred
with the timer setting. (See page 21).
ECONOMY Indicator Lamp (green)
ECONOMY indicator lamp lights when ECONOMY OPERATION and 10 °C HEAT OPERATION is
operating.
Open the Intake Grille (See page 18)
Accessories of the indoor unit
Air Cleaning Filter
Remote
controller
Remote
controller
holder
Tapping screws
(M3 × 12 mm)
Air Filter
Drain Hose
Batteries
Air cleaning filters
Airflow Direction Louver
En-3
9319356112-02_OM.indb 3
2016/2/25 21:09:55
Signal Transmitter
FAN button
►6
MODE button
►6
SWING button
►8
ECONOMY button
►9
10 °C HEAT button
► 10
TEMP. button
►6
START/STOP button
► 6 • 7 • 10
POWERFUL button
►9
: See page
►
REMOTE CONTROLLER
OUTDOOR UNIT
LOW NOISE button
► 10
SET button
►8
TIMER
SETTING
button
WEEKLY
button
SEND
button
ON/OFF
button
SLEEP
button
SELECT
button
► 11~17
NEXT
button
RESET button
►5
BACK
button
► 5 • 11~17
CLOCK ADJUST button
►5
REMOTE CONTROLLER DISPLAY
Transmit Indicator Display
TEMPERATURE Display
►6
MODE Display
►6
FAN Speed Display
►6
SWING Display
LOW NOISE MODE Display
► 10
►8
CLOCK & TIMER Display
► 5 • 11~17
SEND Display
To facilitate explanation, the accompanying illustration has been drawn to show all possible indicators; in actual operation, however, the display will only show those indicators appropriate to the current operation.
■ About the button operation and display of remote control
After the button is pressed on remote
control, only the operated part is displayed until the transmission of the signal
is completed. It is a convenient function to
confirm the content of the operation easily.
Ex.) When you change the preset temperature from 24 °C to 25 °C during the
cooling operation.
Before the button
is pressed
Transmit Indicator Display
When the button
is pressed
Transmission
completed
En-4
9319356112-02_OM.indb 4
2016/2/25 21:09:55
PREPARATION
WARNING
Turn on the Power
● Take care to prevent infants and young
children from accidentally swallowing the
batteries.
Turn on the circuit breaker
Load Batteries (R03/LR03  2)
CAUTION
1
Slide in the direction of the arrow.
2
Be sure to align the battery polarities (+ / -) correctly.
3
Slide the front cover to take it off.
Insert batteries.
Close the front cover.
Set the day of the week and the current time
1
2
Press the CLOCK ADJUST button
Press the SELECT buttons
the week
MO
TU
WE
TH
FR
SA
.
to select the day of
SU
Press the NEXT button
3
Press the SELECT buttons
the current time.
to adjust the clock to
button : Press to advance the time.
button : Press to reverse the time.
4
(Each time the buttons are pressed, the time will be advanced/reversed in
1-minute increments; hold the buttons depressed to change the time quickly
in 10-minute increments.)
Press the SEND button
.
This completes the time setting and starts the clock.
● Press the SEND button, when you are close to the main unit. If you do so
when far from the main unit, the signal may not get properly sent, and the
settings may not get properly configured.
● To prevent malfunction or damage of the
remote controller:
- Place remote controller at where will not
be exposed to direct sunlight or excessive
heat.
- Remove batteries if the product is not
going to be used for an extended period.
- Exhausted batteries must be removed
immediately, and be disposed according
to the local laws and regulations of your
region.
● If leaking battery fluid comes in contact with
your skin, eyes, or mouth, immediately rinse
with plenty of clean water, and consult your
physician.
● Obstacles such as a curtain or wall between
the remote controller and the indoor unit
may affect the appropriate signal transmission.
● Do not apply strong shocks to the remote
controller.
● Do not pour water on the remote controller.
● Do not attempt to recharge dry batteries.
● Do not use dry batteries that has been
recharged.
Use specified type of batteries only.
Do not mix different types or new and
used batteries together.
Batteries can be used about 1 year in
ordinary use. If the remote control range
noticeably shortens, replace the batteries,
and press “RESET” button with the tip of
a ball point pen or other small object.
RESET
No good
To Use the Remote Controller
●
●
●
●
The Remote Controller must be pointed at signal receiver to operate correctly.
Operating Range: About 6 m.
When a signal is properly received by the indoor unit, a beeping sound will be heard.
If no beep is heard, press the Remote Controller button again.
Remote Controller Holder
CAUTION
Insert
Slide up
Screws
Press in
En-5
1
9319356112-02_OM.indb 5
Mount the Holder.
2
Set the Remote
Controller.
Pull out
3
● Keep the signal-receiving part away from
lights and flat panel television screens.
The signal may not be received in rooms
with instantaneous fluorescent lights (such
as inverter type ones). In such cases,
please consult at the store where you purchased the product.
To remove the Remote Controller (when use at hand).
2016/2/25 21:09:55
OPERATION
To Start Operation
Press the START/STOP button
.
The indoor unit’s OPERATION Indicator Lamp (green) will light.
The air conditioner will start operating.
To Select Mode Operation
Press the MODE button
to select the desired mode.
▲
▲
▲
Each time the button is pressed, the mode will change in the following order.
AUTO
COOL
DRY
▼
▼
HEAT
FAN
About 3 seconds later, the entire display will reappear.
Example: When set to COOL.
To Set the Temperature
Press the TEMP. button
.
button: Press to raise the Temperature setting.
button: Press to lower the Temperature setting.
● Temperature setting range:
AUTO ....................................18-30 °C
COOL/DRY ...........................18-30 °C
HEAT .....................................16-30 °C
The temperature cannot be used to set room temperature during the FAN mode (the
temperature will not appear on the Remote Controller's Display).
About 3 seconds later, the entire display will reappear.
The temperature setting should be considered a standard value, and may differ
somewhat from the actual room temperature.
Example: When set to 26 °C.
To Set the Fan Speed
Press the FAN button
.
Each time the button is pressed, the fan speed changes in the following order:
(AUTO)
(HIGH)
(MED)
(LOW)
(QUIET)
About 3 seconds later, the entire display will reappear.
When set to AUTO:
Heating : Fan operates so as to optimally circulate warmed air.
However, the fan will operate at very low speed when the temperature of
the air issued from the indoor unit is low.
Cooling : As the room temperature approaches that of the temperature setting, the
fan speed becomes slower.
When the room temperature is close to the set temperature, the inner
room fan may occasionally stop, in order to save energy.
Fan : The fan runs at the MED fan speed.
Example: When set to AUTO.
SUPER QUIET Operation
SUPER QUIET operation begins. The indoor unit’s airflow will be reduced for quieter
operation.
● SUPER QUIET operation cannot be used during DRY mode. (The same is true when
dry mode is selected during AUTO mode operation.)
● During SUPER QUIET operation, Heating and Cooling performance will be reduced
somewhat. If the room does not warm up/cool down when using SUPER QUIET Operation, please adjust the indoor unit’s Fan Speed.
9319356112-02_OM.indb 6
En-6
2016/2/25 21:09:56
OPERATION
About AUTO CHANGEOVER Operation
AUTO:
● When AUTO CHANGEOVER operation first selected, the fan will operate
at very low speed for about a few minutes, during which time the indoor
unit detects the room conditions and selects the proper mode.
Room temperature is higher than the defined temperature in temperature
setting  Cooling mode or dry mode
Defined
Room temperature is close to the defined temperature in temperature
setting  Determined by outdoor temperature
Room temperature is lower than the defined temperature in temperature
setting  Heating mode
Cooling or Dry
temperature in
Determined by
temperature
outdoor temperature
setting
Heating
● When the indoor unit has adjusted your room’s temperature to near the
temperature setting, it will begin monitor operation. In the monitor operation mode, the fan will operate at low speed. If the room temperature subsequently changes, the indoor unit will once again select the appropriate
operation (Heating, Cooling) to adjust the temperature to the value set in
the temperature.
● If the mode automatically selected by the indoor unit is not what you wish,
select one of the mode operation (HEAT, COOL, DRY, FAN).
About Mode Operation
Heating: ● Use to warm your room.
● When Heating mode is selected, the indoor unit will operate at very low
fan speed for about 3 to 5 minutes, after which it will switch to the selected
fan setting. This period of time is provided to allow the indoor unit to warm
up before begin full operation.
● When the outdoor temperature is very low, frost may form on the outdoor
unit, and its performance may be reduced. In order to remove such frost,
the air conditioner will automatically enter the defrost cycle from time to
time. During Automatic Defrosting operation, the OPERATION Indicator
Lamp will flash, and the Heat operation will be interrupted.
● After the start of Heating operation, it takes some time before the room
gets warmer.
Cooling: ● Use to cool your room.
Dry:
● Use for gently cooling while dehumidifying your room.
● You cannot heat the room during Dry mode.
● During Dry mode, the indoor unit will operate at low speed; in order to adjust room humidity, the indoor unit’s fan may stop from time to time. Also,
the fan may operate at very low speed when adjusting room humidity.
● The fan speed cannot be changed manually when Dry mode has been
selected.
Fan:
● Use to circulate the air throughout your room.
During Heating:
Set the temperature to a temperature setting that is higher than the present room
temperature. The Heating mode will not
operate if the temperature is set lower than
the actual room temperature.
During Cooling/Dry:
Set the temperature to a temperature setting that is lower than the present room
temperature. The Cooling and Dry modes
will not operate if the temperature is set
higher than the actual room temperature (in
Cooling mode, the fan alone will operate).
During Fan:
You can not use the indoor unit to heat and
cool your room.
To Stop Operation
Press the START/STOP button
.
The OPERATION Indicator Lamp (green) will go out.
En-7
9319356112-02_OM.indb 7
2016/2/25 21:09:56
ADJUSTING THE DIRECTION OF AIR CIRCULATION
Vertical (up-down) direction of airflow is adjusted by pressing the Remote Controller's SET button. Horizontal (right-left) airflow direction is adjusted manually, by moving the Airflow Direction Louvers.
Whenever making horizontal airflow adjustments, start air conditioner operation and be sure that the vertical air direction louvers are
stopped.
Vertical Air Direction Adjustment
Press the SET button
WARNING
.
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
5
6
7
Types of Airflow Direction Setting:
1, 2, 3 : During Cooling/Dry
4, 5, 6, 7 : During Heating
1
The Remote Controller's display does not change.
2
3
4
5
6
7
● Use the air direction adjustments within the ranges shown above.
● The vertical airflow direction is set automatically as shown, in accordance with the
type of operation selected.
During Cooling/Dry : Horizontal flow 1
During Heating
: Downward flow 6
● During AUTO mode operation, for the first a few minutes after beginning operation,
airflow will be horizontal 1; the air direction cannot be adjusted during this period.
The airflow direction setting will temporarily become 1 when the temperature of the
airflow is low at the start of the Heating mode.
Right-Left Adjustment
Adjust the Right-Left louvers.
● Move the Right-Left louvers to adjust airflow in the direction you prefer.
Right-Left Louvers
Knob
Knob (2 places)
● Never place fingers or foreign objects inside the outlet ports, since the internal fan
operates at high speed, and personal injury
could be caused.
● Always use the Remote Controller's
SET button to adjust the vertical airflow
louvers. Attempting to move them manually could result in improper operation;
in this case, stop operation and restart.
The louvers should begin to operate
properly again.
● During use of the Cooling and Dry
modes, do not set the Airflow Direction Louvers in the Heating range
(4 - 7) for many hours, since water
vapor may condense near the outlet
louvers and drops of water may drip
from the indoor unit. During the Cooling
and Dry modes, if the Airflow Direction
Louvers are left in the heating range for
more than 30 minutes, they will automatically return to position 3.
● When used in a room with infants, children, elderly or sick persons, the airflow
direction and room temperature should
be considered carefully when making
settings.
CAUTION
● When adjusting the Right-Left Louvers, it
is necessary to stop the Vertical (up-down)
louvers first and make sure that it stops
completely before adjusting the direction.
SWING OPERATION
The product moves the airflow vents up and down to move cool or warm air around all parts of the room.
To select SWING Operation
Press the SWING button
.
The SWING Display “
” will light.
In this mode, the Airflow Direction Louvers will swing automatically to direct the airflow
both up and down.
To stop SWING Operation
Press the SWING button
once again.
The SWING Display “
” will go out.
Airflow direction will return to the setting before swing was begun.
About Swing Operation
During Cooling/Dry : Swings between 1 and 4.
During Heating
: Swings between 4 and 7.
● The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.
En-8
9319356112-02_OM.indb 8
2016/2/25 21:09:57
POWERFUL OPERATION
The product will operate at maximum power, which is convenient when you want to quickly cool down or warm up the room.
Begin Air Conditioner operation before performing this procedure.
To use POWERFUL Operation
Press the POWERFUL button
.
Only as for this button operation, the beep sound is different from the others.
Powerful operation start: Beep 3 times (Pi Pi Pi !) / Others: Beep 2 times (Pi Pi !)
To stop POWERFUL Operation
Press the POWERFUL button
again.
Normal operation begins.
About POWERFUL Operation
Cooling/Dry ● Powerful Operation mode is automatically turned off when the room temperature has fallen to the set temperature or
when 20 minutes have passed after setting the POWERFUL Operation mode. However, it does not turn off automatically within a certain time of setting the POWERFUL Operation mode.
Heating
● Powerful Operation mode is automatically turned off when the room temperature has risen to the set temperature or
when 20 minutes have passed after setting the POWERFUL Operation mode. However, it does not turn off automatically within a certain time of setting the POWERFUL Operation mode.
● Wind direction and airflow rate are automatically set in POWERFUL Operation mode. Wind direction can be changed
through the wind direction adjustment button.
● POWERFUL Operation and ECONOMY Operation modes can’t be set simultaneously.
The function whose button on the remote controller is last pressed will be given priority.
● If the POWERFUL Operation is set while setting the “
”, “
” will be executed after the POWERFUL Operation ends.
ECONOMY OPERATION
Begin Air Conditioner operation before performing this procedure.
Indicator Lamp
To Use the ECONOMY Operation
Press the ECONOMY button
.
OPERATION TIMER
ECONOMY
The ECONOMY indicator Lamp (green) will light.
ECONOMY operation begins.
To Stop the ECONOMY Operation
Press the ECONOMY button
: Lighting
: OFF
again.
The ECONOMY Indicator Lamp (green) will go out.
Normal operation begins.
About ECONOMY Operation
● When ECONOMY operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode
and lower than set-temp under heating mode. Therefore, the ECONOMY mode is able to save more energy than other normal
mode.
● In case of single-type air conditioner, at the maximum output, ECONOMY operation is approximately 70% of normal air conditioner operation for cooling and heating.
● In case of multi-type air conditioner, the ECONOMY operation mode is only available for the set indoor unit.
● If the room is not cooled (or heated) well during ECONOMY operation, select normal operation.
● During the monitor period in the AUTO mode, the air conditioner operation will not change to ECONOMY operation even if
ECONOMY operation is selected by pressing the ECONOMY operation button.
En-9
9319356112-02_OM.indb 9
2016/2/25 21:09:57
10 °C HEAT OPERATION
To use 10 °C HEAT Operation
Press the 10 °C. HEAT button
.
The ECONOMY indicator lamp (green) will light.
To stop 10 °C HEAT Operation
Press the START/STOP button
While 10 °C HEAT OPERATION is in
progress, only the following operation
can be used.
• SET
.
The ECONOMY indicator lamp (green) will go out.
Then the operation stops.
Indicator Lamp
About the 10 °C HEAT Operation
• The Heating mode will not operate if the room temperature is high enough.
• The room temperature can be maintained at 10 °C by pressing the 10 °C. HEAT butso as to prevent the room temperature from falling too far.
ton
• In case of multi-type air conditioner, if other indoor unit is used for heating, the temperature of the room where the “10°C HEAT” function is applied will rise. When using the
“10°C HEAT” function, we recommend all indoor units should be run under the“10°C
HEAT” mode.
OPERATION
: Lighting
TIMER
ECONOMY
: OFF
OUTDOOR UNIT LOW NOISE OPERATION
OUTDOOR UNIT LOW NOISE Operation mode reduces the noise level of the outdoor unit by suppressing the fan speed and the rotation number of the compressor.
It is effective when the surrounding area is quiet, such as in the night.
To use the OUTDOOR UNIT LOW NOISE Operation
Press the OUTDOOR UNIT LOW NOISE button
“LOW NOISE” appears on the Remote Controller display “
.
”.
To stop the OUTDOOR UNIT LOW NOISE Operation
Press the OUTDOOR UNIT LOW NOISE button
“LOW NOISE” disappears from the Remote Controller display “
Normal operation begins.
.
”.
About OUTDOOR UNIT LOW NOISE Operation
• OUTDOOR UNIT LOW NOISE Operation mode can be used during cooling, heating and automatic operation. It can not be used in
FAN and DRY mode.
• OUTDOOR UNIT LOW NOISE Operation setting is saved even if the air-conditioned is stopped. Display on the remote control is
also retained.
• When the fan speed and the rotation number of the compressor of the outdoor unit have sufficiently reduced, OUTDOOR UNIT
LOW NOISE Operation mode does not further reduce the fan speed and the rotation number of the compressor.
• Moreover, if the POWERFUL Operation is set while setting the “
”, “
” will be executed after the POWERFUL Operation ends.
• When outdoor air temperature is high, it may not be operated even if it has been set.
• When compressor rotational speed and fan speed are low enough, it may not be operated even if it has been set.
• This function cannot be used for the Multi-type air conditioner. Please release it when it is set. Otherwise the signal of wireless
remote controller cannot be received.
MANUAL AUTO OPERATION
Use the MANUAL AUTO operation in the event the Remote Controller is lost or otherwise unavailable.
How To Use the Main Unit Controls
Press the MANUAL AUTO button
more than 3 seconds
and less than 10 seconds on indicator.
To stop operation, press the MANUAL AUTO button
About the MANUAL AUTO button
for 3 seconds.
, please see page 3.
● When the air conditioner is operated
by the controls on the MANUAL AUTO
button, it will operate under the same
mode as the AUTO mode selected on
the Remote Controller (see page 7).
● The fan speed selected will be “AUTO”
and the temperature setting will be standard (24 °C).
En-10
9319356112-02_OM.indb 10
2016/2/25 21:09:57
ON/OFF TIMER OPERATION
● ON TIMER
: The air conditioner will start at the time you set.
● OFF TIMER
: The air conditioner will stop at the time you set.
● Before using the timer function, be sure that the Remote Controller is set to the correct current time.
To use the ON timer or OFF timer
1
Press the TIMER SETTING button
At the beginning, “
.
” will be flashing, so press
the SELECT button
”.
within “
to select either “
Press the NEXT button
2
SELECT button
OFF time.
3
Press the SEND button
” or “
.
to set the desired ON time or
.
“
In the case of the ON timer, the air conditioner will stop running.
instead of pressing the SEND button
”●“
” or “
” will be flashing
To Stop Air Conditioner Operation
while the Timer is Operating
If you want to cancel the setting midway, please press the TIMER SETTING button
”
Press the START/STOP button
.
.
To cancel the ON timer or OFF timer
1
2
Press the ON/OFF button
displayed.
“
”
while “
”
is
will disappear from the display.
● Press the ON/OFF button
while “
” is not displayed to set the ON (OFF) TIMER again for the time you set last time.
● You cannot combine WEEKLY TIMER, ON/OFF TIMER (PROGRAM TIMER), and SLEEP TIMER.
En-11
9319356112-02_OM.indb 11
2016/2/25 21:09:58
PROGRAM TIMER OPERATION
● The program timer allows you to integrate OFF timer and ON timer operations in a
single sequence. The sequence can involve 1 transition from OFF timer to ON timer,
or from ON timer to OFF timer, within a 24 hour period.
● Before using the timer function, be sure that the Remote Controller is set to the correct current time.
To use the PROGRAM timer
1
Press the TIMER SETTING button
At the beginning, “
” will be flashing, so press
the SELECT button
”.
“
to select “
Press the NEXT button
2
” within
.
Press the SELECT button
time.
Press the NEXT button
3
.
to set the desired ON
.
Flashing the “
Press the SELECT button
time.
to set the desired OFF
”●“
”.
To Stop Air Conditioner Operation
while the Timer is Operating
.
Press the START/STOP button
4
Press the SEND button
.
In the case of the ON timer, the air conditioner will stop running.
If you want to cancel the setting midway, please press the TIMER SETTING
instead of pressing the SEND button
button
.
To cancel the PROGRAM timer
1
2
Press the ON/OFF button
displayed.
“
while “
” is
” will disappear from the display.
● Press the ON/OFF button
while “
” is not displayed to set the ON (OFF) TIMER again for the time you set
last time.
● Only run operation once with the OFF TIMER and ON TIMER combined.
(Either OFF → ON or ON → OFF once)
● Out of OFF TIMER and ON TIMER, the timer which has the nearest set time to the present will run first. You can display the
sequence of operation by using the arrows on the display part of the remote control (“
” or “
”).
● You cannot combine WEEKLY TIMER, ON/OFF TIMER (PROGRAM TIMER), and SLEEP TIMER.
● The PROGRAM TIMER cannot be set for times more than 24 hours in advance.
En-12
9319356112-02_OM.indb 12
2016/2/25 21:09:59
SLEEP TIMER OPERATION
You can set the OFF TIMER to any time you want when you go to sleep.
The product adjusts the temperature to make it suitable for sleeping, which helps you sleep comfortably.
Once you set the time you want, you can easy set the timer to run from the next time, simply by pressing the SLEEP button
once.
To use the SLEEP Timer
1
Press the TIMER SETTING button
” will be firstly displayed flashing.
“
Press the SELECT button
to select “
Press the NEXT button
2
7H
Press the SEND button
9H
0.5H
(30 min)
▲
1H
▲
2H
▲
3H
▲
▲
5H
▲
5H
▲
3H
▲
2H
▲
1H
7H
▲
9H
▲
button:
▲
(30 min)
0.5H
to set the OFF time.
▲
button:
”.
.
Press the SELECT button
▲
3
.
.
Flashing the “
If you want to cancel the setting midway, please press the TIMER SETTING butinstead of pressing the SEND button
ton
”●“
”
To Stop Air Conditioner Operation
while the Timer is Operating
.
Press the START/STOP button
.
To cancel the SLEEP Timer
1
2
Press the SLEEP button
played.
“
while “
● When you press the SLEEP button
” is dis-
while
is no longer
displayed, the SLEEP TIMER you set
last time will be set again.
● The WEEKLY TIMER, ON/OFF
TIMER (program timer) and SLEEP
TIMER cannot be combined.
” will disappear from the display.
About the SLEEP timer
To prevent excessive warming or cooling during sleep, the SLEEP timer function automatically modifies the temperature setting in
accordance with the set time setting. When the set time has elapsed, the air conditioner completely stops.
During Heating operation:
When the SLEEP timer is set, the temperature setting is
automatically lowered 1 °C every 30 minutes. When the temperature setting is lowered a total of 4 °C, the temperature setting at that time is maintained until the set time elapses, at which
time the air conditioner automatically turns off.
SLEEP timer setting
During Cooling/Dry operation:
When the SLEEP timer is set, the temperature setting is automatically raised 1 °C every 1 hour. When the temperature setting is raised a total of 2 °C, the temperature setting at that time
is maintained until the set time elapses, at which time the air
conditioner automatically turns off.
SLEEP timer setting
Set temp.
1 °C 2 °C
Set time
3 °C
4 °C
1 hour
30
minutes
Set temp.
1 hour
1 °C
2 °C
1 hour
30 minutes
Set time
En-13
9319356112-02_OM.indb 13
2016/2/25 21:10:00
WEEKLY TIMER OPERATION
Using in these cases of WEEKLY timer
The “OFF Timer” at which the operation will be stopped and the “ON Timer” at which the operation will be started can be combined,
) can be applied for one day, and 28 reservations for a week.
and up to 4 reservations (program
Before creating the program, please adjust the week and time first, and than send it to the air conditioner.
If the week and time are not adjusted, the program will not be operated at the set time.
Please refer to [Set the day of the week and current time] (page 5).
Once you set this, the set operation will run on every day and every week.
Example of how to set the timer 1
Monday to Friday
Program
Set the ON Timer with a temperature of 24°C for 7 am. Program
Set the OFF timer for 9 am.
Program
Set the ON Timer with a temperature of 26°C for 5 pm. Program
Set the OFF timer for 11 pm.
Saturday
Program
~
No timer settings.
Sunday
at 9:00, Program
If you set the OFF Timer for Program
Program
7:00 ON 24°C
Monday to
Friday
Program
9:00 OFF
Leave for work
at 17:00, and Program
Program
17:00 ON 26°C
at 23:00.
Program
23:00 OFF
Go to sleep
Come back
home
Wake up
Saturday
Sunday
at 11:00, Program
No timer settings
ON
Program
9:00 OFF
ON
Program
11:00 OFF
ON
Program
17:00 OFF
ON
Program
23:00 OFF
Example of how to set the timer 2
You can specify a given temperature in the ON setting in WEEKLY TIMER.
* You can set the temperature for Auto, Cool, and Dry within the range 18-30°C, for Heat the range is 10 or 16-30°C.
Even if you set 10, 16, or 17°C, if you run the product on Auto, Cool, or Dry it will run at 18°C.
During the heating season, even if you configure detailed settings with the temperature low when there is no one in the room and
high when there is someone there, the air conditioning will automatically switch over.
Program
7:00 ON 22°C
Notes:
Program
9:00 ON 24°C
Program
17:00 ON 26°C
Program
23:00 ON 22°C
● Operations other than the temperature setting will be the same at the last time operation was stopped,
so Cooling → Heating → Cooling → Heating type of operations cannot be automatically set.
● If the ON and OFF programs are set at the same time, the air-conditioning will run the ON program.
If two ON programs are set at the same time, the air-conditioning will run the program that was set earlier.
● If there is a power interrupting, such as due to a power outage during the WEEKLY timer setting or a
circuit breaker cutting out, the internal timer of the air-conditioning will be incorrect. (See page 21 Auto
Restart) In such a case, the main timer lamp will notify you of this by flashing, so carry out matching of
the time and date. (See page 5 Set the day of the week and current time)
● You cannot use the ON/OFF together with the SLEEP timer.
If you want to run the product on WEEKLY TIMER after the time is up after using the ON/OFF Timer,
Program Timer, or SLEEP Timer within the WEEKLY TIMER, you need to set the WEEKLY TIMER again.
(see page 17)
En-14
9319356112-02_OM.indb 14
2016/2/25 21:10:01
WEEKLY TIMER OPERATION
To use WEEKLY timer operation
1
Press the TIMER SETTING button
” will be flashing.
Firstly, since “
Press the NEXT button
2
.
.
Select the program and the day using the SELECT button
Program
1Week
Program
Monday Program
Program
1Week
Program
Monday
Tuesday
Program
.
Program
Sunday
Saturday Program
Sunday
Flashing the “
”.
Press the NEXT button
, when the program
and day you want to set are flashing.
The program and day of the
week /“
” will be flashing
3
Using the SELECT button
select operation with
the ON Timer, OFF Timer, or without a timer.
To operate without a timer
1. Press the NEXT button
to go back to step 2 and config-
ure the next setting.
2. Press the SEND button
to finish
Press the NEXT button
.
Flashing the “
” or “
”•“
”.
En-15
9319356112-02_OM.indb 15
2016/2/25 21:10:01
WEEKLY TIMER OPERATION
4
Press the SELECT button
time or OFF time.
to set the desired ON
If you selected OFF in step 3
1. Press the NEXT button
to go back to step
2 and configure the
next setting.
.
2. Press the SEND button
Press the NEXT button
.
The time display /“
5
Press the SELECT button
” will be flashing
to set the temperature.
If you want to move on to the next setting, press the
NEXT button
, return to step 2 and configure
the next setting.
To complete the setting, Press the SEND button
.
If you want to cancel the setting midway, please press the TIMER SETTING
button
instead of pressing the SEND button
.
The temperature display /“
” will be
flashing
Notes:
● When canceling the WEEKLY TIMER, select No Timer Operation in Step 3 in To use WEEKLY TIMER Operation.
● If you want to go back to the previous step will configuring settings, press the BACK button
to return to the
previous step.
● Press the SEND button
, when you are close to the main unit. If you do so when far from the main unit, the
signal may not get properly sent, and the settings may not get properly configured.
En-16
9319356112-02_OM.indb 16
2016/2/25 21:10:02
WEEKLY TIMER OPERATION
Check the schedule
1
Press the TIMER SETTING button
Firstly, since “
” will be flashing.
Press the NEXT button
2
.
Check the program, the day, and the time with the
SELECT button
3
.
.
Press the TIMER SETTING button
the regular screen.
to return to
To cancel the WEEKLY timer
1
2
Press the WEEKLY button
displayed.
“
●“
when “
” is
” will disappear from the display.
” is not shown, press the WEEKLY button
to set the WEEK-
LY TIMER again.
● You cannot combine WEEKLY TIMER, ON/OFF TIMER (PROGRAM TIMER), and
SLEEP TIMER.
En-17
9319356112-02_OM.indb 17
2016/2/25 21:10:03
CLEANING AND CARE
3. Replace the air filters.
CAUTION
● Before cleaning this product, be sure to turn it off and disconnect all the power supply.
● Before starting operation, make sure that the intake grille has
been shut completely.
● Do not touch the aluminum fins of heat exchanger built-in the
indoor unit to avoid personal injury when you maintain the unit.
● Do not expose the indoor unit to liquid insecticides or hair
sprays.
● Do not stand on slippery, uneven or unstable surfaces when
you maintain the unit.
Align the sides of the air filter with the panel, and push in
fully, making sure the 2 lower tabs are returned properly to
their holes in the panel.
Air filter tabs (2 places)
Open the Intake Grille
Close the Intake Grille
1. The tab on both sides of the intake grille
is pulled forward.
1. Release the grille stay.
Grille stay
Click
Tab
Tab
Do not open the Open Panel only.
GOOD
Open Panel
PROHIBITED
2. Close the intake grille.
Press point A and point C lightly until they click, then press
lightly at point B.
Click
Intake grille tab
A
B
C
Click
Intake grille tab
2. Fix the intake grille with the grille stay.
Grille stay
Click
For point C, please
slightly press inner side.
If the intake grille is not complete closed, the air-conditioner
will not operate and the lamp will flash as shown below.
Indicator Lamp
OPERATION TIMER
ECONOMY
Cleaning the Air Filters
1. Remove the air filters.
Lift up the air filter handle, disconnect the 2 lower tabs, and
pull out.
Air filter handles
Air filter tabs (2 places)
2. Remove dust with a vacuum cleaner or by
washing.
● Dust can be cleaned from the air filter either with a vacuum
cleaner, or by washing the filter in a solution of neutral detergent and warm water. If you wash the filter, be sure to allow it
to dry thoroughly in a shaded place before reinstalling.
● If dust is allowed to accumulate on the air filter, airflow will be
reduced, lowering operating efficiency and increasing noise.
● During periods of normal use, the Air Filters should be
cleaned every 2 weeks.
: Flashing
● Firstly, the Operation Lamp will flash 5 times, and then the
Timer Lamp will flash 8 times, and this will be repeated.
● The Economy Lamp will continue to flash.
● Close the intake grille firmly.
When the grille is closed firmly, flashing of the lamps stop
and the indoor unit starts the operation.
● When closing the intake grille, the open panel perhaps is
opened. On this occasion, please turn off power supply
firstly then turn on it, the open panel will return to a normal
close state.
● When used for extended periods, the indoor unit may
accumulate dust inside, reducing its performance. We
recommend that the indoor unit be inspected regularly,
in addition to your own cleaning and care. For more
information, consult authorized service personnel.
● When cleaning the indoor unit’s body, do not use water
hotter than 40 °C, harsh abrasive cleansers, or volatile
agents like benzene or thinner.
● When shutting down the indoor unit for 1 month or more,
first allow the fan mode to operate continuously for half a
day to allow internal parts to dry thoroughly.
En-18
9319356112-02_OM.indb 18
2016/2/25 21:10:04
CLEANING AND CARE
Install or Replace the Air Cleaning Filter
1. Open the intake grille and remove the air
filters.
Please refer to the page 18.
2. Remove the dirty air cleaning filters
attached to the frames of the front panel.
(When replacing)
Air cleaning filter frame
About the Air Cleaning Filters
● When Air Cleaning Filters are used, the effect will increased
by setting the fan speed to “High”.
[APPLE-CATECHIN FILTER]
(1 sheet)
● The Air Cleaning Filters are disposable filters. (They can not
be washed and reused.)
● For storage of the Air Cleaning Filters, use the filters as soon
as possible after opening the package.
(The air cleaning effect decreases when the filters are left in
the opened package)
● Generally, the filters should be exchanged about every 3
months.
Please buy dedicated air cleaning filters (UTR-FA16) (Sold
separately) to exchange the used dirty air cleaning filter.
Air cleaning filters
3. Attach the new (or maintained) air cleaning filters to the frame of the front panel.
[ION DEODORIZATION FILTER (light blue)]
(1 sheet)
Air cleaning filter frame
● The filter should be exchanged about every 3 years so as to
maintain the deodorizing effect.
● Filter frame is not a one-off product.
Please buy dedicated deodorizing filter (UTR-FA16-2) (Sold
separately) when exchanging the filter.
Tabs (7 places)
Tabs (7 places)
Air cleaning filter
The new air cleaning filters can be attached to any of the
right frame or the left frame.
Replace filters with the following components (purchased
separately).
● APPLE-CATECHIN FILTER: UTR-FA16
● ION DEODORIZATION FILTER: UTR-FA16-2
4. Install the air filters and close the intake
grille.
Please refer to page 18.
Maintenance of Deodorizing Filters
In order to maintain the deodorizing effect, please clean the
filter in the follow way once 3 months.
(1) Remove the deodorizing filter.
(2) Clean with water and dry in the air.
1) Flush the filter with high-pressure hot water until the
surface of the filter is covered with water. Please flush
with diluent neutral detergent.
Never wash by reaming or rubbing, otherwise it will
damage the deodorizing effect.
2) Rinse with water flow.
3) Dry in shade.
(3) Reinstall the deodorizing filter.
Filter Indicator Reset (The special setting)
Can be used if set correctly during installation.
Please consult authorized serviceman when using this
function.
● ECONOMY lamp will flashing on when it is time to clean the
air filters.
Indicator Lamp
OPERATION TIMER
ECONOMY
: Flashing
● Clean the air filters referring to page 18.
● After cleaning, press the MANUAL AUTO button
2 seconds or less on the indoor unit. (See page 3)
for
En-19
9319356112-02_OM.indb 19
2016/2/25 21:10:04
TROUBLESHOOTING
In following events, immediately stop operation of the air conditioner, and disconnect all the power
supply by turning off the electrical breaker or disconnecting the power plug. Then consult your dealer
or authorized service personnel.
As long as the unit is connected to the power supply, it is not insulated from the power supply even if
the unit is turned off.
● Unit smells of something burning or emits smoke
● Water leaks from the unit
WARNING
Before requesting service, perform the following checks:
NORMAL
FUNCTION
Symptom
Cause
See Page
Does not operate immediately:
● If the indoor unit is stopped and then immediately started again, the
compressor will not operate for about 3 minutes, in order to prevent
fuse blowouts.
● Whenever the electrical breaker is turned off then on again the protection circuit will operate for about 3 minutes, preventing unit operation during that period.
—
● During operation or immediately after stopping the unit, the sound
of water flowing in the air conditioner’s piping may be heard. Also,
noise may be particularly noticeable for about 2 to 3 minutes after
starting operation (sound of refrigerant flowing).
● During operation, a slight squeaking sound may be heard. This is
the result of minute expansion and contraction of the front panel
due to temperature changes.
—
● During Heating operation, a sizzling sound may be heard occasional.
This sound is produced by the Automatic Defrosting operation.
21
● Some smell may be emitted from the indoor unit. This smell is the
result of room smells (furniture, tobacco, etc.) which have been
taken into the indoor unit.
—
● During Cooling or Dry operation, a thin mist may be seen emitted
from the indoor unit. This results from the sudden Cooling of room
air by the cool air emitted from the indoor unit, resulting in condensation and misting.
—
● During Heating operation, the outdoor unit’s fan may stop, and
steam may be seen rising from the unit. This is due to Automatic
Defrosting operation.
21
● When Heating operation is started, fan speed is temporarily very
low, to allow internal parts to warm up.
● During Heating operation, if the room temperature rises above the
temperature setting, the outdoor unit will stop, and the indoor unit
will operate at very low fan speed. If you wish to warm the room
further, set the temperature for a higher setting.
—
● During Heating operation, the indoor unit will temporarily stop operation (Max. 15 minutes) as the Automatic Defrosting mode operates. During Automatic Defrosting operation, the OPERATION Indicator Lamp will flash.
22
● During Dry mode, the indoor unit will operate at low speed; in order
to adjust room humidity, the indoor unit’s fan may stop from time to
time. Also, the fan may operate at very low speed when adjusting
room humidity.
7
● During SUPER QUIET operation, the fan will operate at very low
speed.
6
● In the monitor of AUTO operation, the fan will operate at very low
speed.
7
● In case of Multi-type unit, if multiple units are operated in different operation modes as shown below, the units operated afterward will stop
and the OPERATION indicator lamp (green) will flash.
Heating mode and cooling mode (or Dry mode)
Heating mode and fan mode
22
● During Heating operation, water may be produced from the outdoor
unit due to Automatic Defrosting operation.
21
Noise is heard:
Smells:
Mist or steam is emitted:
Airflow is weak or stops:
Water is produced from
the outdoor unit:
En-20
9319356112-02_OM.indb 20
2016/2/25 21:10:04
TROUBLESHOOTING
Symptom
Does not operate at all:
CHECK ONCE
MORE
Items to check
See Page
● Has the circuit breaker been turn off?
● Has there been a power failure?
● Has a fuse blown out, or a circuit breaker been tripped?
—
● Is the intake grille completely closed?
18
● Is the timer operating?
● Is Multi-type air conditioner set to “
controller?
Poor Cooling (or Heating)
performance:
The unit operates
differently from the Remote
Controller’s setting:
11 - 17
” with the wireless remote
●
●
●
●
●
10
Is the Air Filter dirty?
Are the air conditioner’s intake grille or outlet port blocked?
Did you adjust the room temperature settings (temperature) correctly?
Is there a window or door open?
In the case of Cooling operation, is a window allowing bright sunlight
to enter? (Close the curtains.)
● In the case of Cooling operation, are there heating apparatus and
computers inside the room, or are there too many people in the room?
—
● Has OUTDOOR UNIT LOW NOISE not been set?
10
● Is the unit set for SUPER QUIET operation?
6
● Are the Remote Controller’s batteries dead?
● Are the Remote Controller’s batteries loaded properly?
5
If the problem persists after performing these checks, or if you notice burning smells, or the OPERATION Indicator Lamp and the
TIMER Indicator Lamp flashes, and ECONOMY Indicator Lamp flashes fast. Immediately stop operation, turn off the electrical breaker and consult authorized service personnel.
OPERATING TIPS
Operation and Performance
Heating Performance
● This air conditioner operates on the heat-pump principle,
absorbing heat from outdoor air and transferring that heat
to indoor unit. As a result, the operating performance is
reduced as outdoor air temperature drops. If you feel that
insufficient heating performance is being produced, we
recommend you use this air conditioner in conjunction with
another kind of heating appliance.
● Heat-pump air conditioners heat your entire room by recirculating air throughout the room, with the result that some
time may be required after first starting the air conditioner
until the room is heated.
Microcomputer-controlled Automatic Defrosting
● When using the Heating mode under conditions of low outdoor temperature and high humidity, frost may form on the
outdoor unit, resulting in reduced operating performance.
In order to prevent this kind of reduced performance, this
air conditioner is equipped with a Microcomputer-controlled
Automatic Defrosting function. If frost forms, the air conditioner will temporarily stop, and the defrosting circuit will
operate briefly (Max.15 minutes).
During Automatic Defrosting operation, the OPERATION
Indicator Lamp (green) will flash.
● After heating operation stops, if frost forms on the outdoor
unit, the unit will start Automatic Defrosting operation. At
this time, the outdoor unit will automatically stop after operating for a few minutes.
AUTO Restart
In Event of Power Interruption
● The power supply to the air conditioner is stopped by a
power interruption. The air conditioner will then restart automatically in its previous mode when the power is restored.
En-21
9319356112-02_OM.indb 21
● If a power interruption occurs during TIMER operation, the timer will be reset and the indoor unit will begin (or stop) operation
at the new time setting. In the event that this kind of timer fault
occurs, the TIMER Indicator Lamp will flash (see Page. 3).
● Use of other electrical appliances (electric shaver, etc.) or
nearby use of a wireless radio transmitter may cause the air
conditioner to malfunction. In this event, temporarily turn off
the circuit breaker, turn it on and then use the Remote Controller to resume operation.
2016/2/25 21:10:04
OPERATING TIPS
Multi-type Air conditioner
This indoor unit can be connected to a multi-type outdoor unit depending on model. The multi-type air conditioner allows multiple indoor units to be operated in multiple locations. The indoor units may be operated simultaneously, in accordance with their respective
output.
Simultaneous Use of Multiple Units
● When using a multi-type air conditioner, the multiple indoor
units can be operated simultaneously, but when two or
more indoor units of the same group are operated simultaneously, the heating and cooling efficiency will be less
than when a single indoor unit is used alone. Accordingly,
when you wish to use more than 1 indoor unit for cooling
at the same time, the use should be concentrated at night
and other times when less output is required. In the same
way, when multiple units are used simultaneously for heating, it is recommended that they be used in conjunction
with other auxiliary space heaters, as required.
● Operation can be done in the following different operating
modes.
● Seasonal and outdoor temperature conditions, the structure of the rooms and the number of persons present may
also result in differences of operating efficiency. We recommend that you try various operating patterns in order to
confirm the level of heating and cooling output provided by
your units, and use the units in the way that best matches
your family’s lifestyle.
For example, if indoor unit (A) was started in fan mode
and then indoor unit (B) was then operated in heating
mode, indoor unit (A) would temporarily start operation
in fan mode but when indoor unit (B) started operating in
heating mode, the OPERATION indicator lamp (green) for
indoor unit (A) would begin to flash (1 second on, 1 second off) and it would go into standby mode. Indoor unit (B)
would continue to operate in heating mode.
● If you discover that one or more units delivers a low level
of cooling or heating during simultaneous operation, we
recommend that you stop simultaneous operation of the
multiple units.
Cooling mode and Dry mode
Cooling mode and Fan mode
Dry mode and fan mode
● The operating mode (heating mode or cooling (dry) mode)
of the outdoor unit will be determined by the operating
mode of the indoor unit that was operated first. If the indoor unit was started in fan mode, the operating mode of
the outdoor unit will not be determined.
● Operation cannot be done in the following different operating modes.
If the indoor unit is instructed to do an operating mode that
it cannot perform, the OPERATION indicator lamp (green)
on the indoor unit will flash (1 second on, 1 second off)
and the unit will go into the standby mode.
Heating mode and cooling mode (or dry mode)
Heating mode and fan mode
Notice
● During use of the heating mode, the outdoor unit will occasionally commence the defrost operation for brief periods.
During the defrosting operation, if the user sets the indoor
unit for heating again, the defrosting mode will continue,
and the heating operation will begin after completion of
defrosting, with the result that some time may be required
before warm air is emitted.
● During use of the heating mode, the top of the indoor unit
may become warm, but this is due to the fact that coolant is circulated through the indoor unit even when it is
stopped; it is not a malfunction.
En-22
9319356112-02_OM.indb 22
2016/2/25 21:10:04
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement