Copystar TASKalfa 552ci Operation Guide

Copystar TASKalfa 552ci Operation Guide
250ci/300ci/400ci/500ci/552ci
OPERATION GUIDE
Please read this Operation Guide before using this machine. Keep it close to the machine for easy reference.
Introduction
Thank you for your purchase of 250ci/300ci/400ci/500ci/552ci.
This Operation Guide is intended to help you operate the machine correctly, perform routine maintenance and
take a simple troubleshooting action as necessary, so that you can always use the machine in good condition.
Please read this Operation Guide before you start using the machine, and keep it close to the machine for easy
reference.
We recommend the use of our own brand supplies. We will not be liable for any damage caused by the use of
third party supplies in this machine.
A label shown in the illustration assures that the supplies are our own brand.
In this Operation Guide, 250ci/300ci/400ci/500ci/552ci are referred to as 25/25 ppm model, 30/30 ppm model,
40/40 ppm model, 50/40 ppm model, and 55/50 ppm model respectively.
Included Guides
The following guides are supplied with the machine. Refer to them as necessary.
Operation Guide (This Guide)
Describes how to load paper, basic copy, print and scan operations, and troubleshooting.
Quick Guide to Adjusting Image Quality
Adjustments to color image quality are explained using sample images.
Safety Conventions in This Guide
The sections of this guide and parts of the machine marked with symbols are safety warnings meant to protect
the user, other individuals and surrounding objects, and ensure correct and safe usage of the machine. The
symbols and their meanings are indicated below.
WARNING: Indicates that serious injury or even death may result
from insufficient attention to or incorrect compliance with the
related points.
CAUTION: Indicates that personal injury or mechanical damage
may result from insufficient attention to or incorrect compliance
with the related points.
Symbols
The  symbol indicates that the related section includes safety warnings. Specific points of attention are
indicated inside the symbol.
.... [General warning]
.... [Warning of danger of electrical shock]
.... [Warning of high temperature]
The
symbol indicates that the related section includes information on prohibited actions. Specifics of the
prohibited action are indicated inside the symbol.
.... [Warning of prohibited action]
.... [Disassembly prohibited]
The  symbol indicates that the related section includes information on actions which must be performed.
Specifics of the required action are indicated inside the symbol.
.... [Alert of required action]
.... [Remove the power plug from the outlet]
....
[Always connect the machine to an outlet with a ground
connection]
Please contact your service representative to order a replacement if the safety warnings in this Operation Guide
are illegible or if the guide itself is missing (fee required).
NOTE: An original which resembles a bank note closely may not be copied properly in some rare cases
because this machine is equipped with a counterfeiting prevention function.
i
Contents
Contents
Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Caution / Warning Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Precautions for Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
SAFETY OF LASER BEAM (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Safety Instructions Regarding the Disconnection of Power (the United States) . . . . . . . . . . . . . xvii
Legal Restriction on Copying/Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix
Legal and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi
1
Part Names
Operation Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
2
Preparation before Use
Check the Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Determining the Connection Method and Preparing Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Connecting Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Low Power Mode and Auto Low Power Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
Sleep and Auto Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Adjusting the Operation Panel Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Switching the Language for Display [Language]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Setting Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Network Setup (LAN Cable Connection). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
Installing Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
COMMAND CENTER (Settings for E-mail). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Loading Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20
Loading Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32
3
Basic Operation
Login/Logout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Enter key and Quick No. Search key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Touch Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Original Preview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Selecting Color Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Printing - Printing from Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
Confirmation Screen of Destinations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Specifying Destination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30
Using Document Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33
Basic Operation for Document Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35
Canceling Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-42
Quick Setup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-43
Program (Copying and Sending). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-46
Registering Shortcuts (Copy, Send, and Document Box Settings) . . . . . . . . . . . . . . . . . . . . . . 3-48
Using the Internet Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-49
4
Copying Functions
Original Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
ii
OPERATION GUIDE
Contents
Paper Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Mixed Size Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Original Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Output Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Combine Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Margin/Centering Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Border Erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
Booklet from Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18
Cover Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21
Form Overlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22
Page Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23
Memo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24
Poster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26
Image Repeat/Double Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27
EcoPrint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29
Single Color Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29
Color Balance Adjust. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30
Hue Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
One-touch Image Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33
Sharpness Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34
Background Density Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35
Continuous Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36
Auto Image Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37
Negative Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37
Mirror Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38
Job Finish Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39
File Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41
Priority Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41
Repeat Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-42
OHP Backing Sheet Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-44
5
Sending Functions
Original Size Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Sending Size Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Centering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Mixed Size Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
1-sided/2-sided Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
Original Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11
File Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
File Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13
PDF Encryption Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
Adjusting Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
Scan Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18
Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19
Background Density Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20
Color / Grayscale / Black and White Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21
Continuous Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22
Border Erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23
Enter Document Name/File Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25
Enter E-mail Subject and Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26
WSD Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27
Job Finish Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29
Send and Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
OPERATION GUIDE
iii
Contents
Send and Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
FTP Encrypted TX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31
Color Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31
About Color Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32
6
Document Box
Using a Custom Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Using a Job Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
Printing Documents Stored in Removable USB Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-20
Saving Documents to USB Memory (Scan to USB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22
7
Status / Job Cancel
Checking Job Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Checking Job History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Sending the Log History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Pause and Resumption of Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Canceling of Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Priority Override for Waiting Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14
Reordering Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14
Checking the Remaining Amount of Toner and Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
Device/Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-16
8
Default Setting (System Menu)
Common Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Copy Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-27
Sending Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-30
Document Box Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-33
Printer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-35
Printing Reports/Sending Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-41
Adjustment/Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-44
Date/Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-55
Editing Destination (Address Book/Adding One Touch Keys). . . . . . . . . . . . . . . . . . . . . . . . . . 8-60
Internet Browser Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-67
Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-69
System Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-72
Restarting the System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-72
Network Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-73
Interface Block Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-80
Security Level (Security Level setting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-81
Document Guard Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-81
Optional Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-83
Accessibility Display (Enlarged Touch Panel Display) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-84
9
Maintenance
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
Toner Container and Waste Toner Box Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8
10
Troubleshooting
Solving Malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
Responding to Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6
Clearing Paper Jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-15
11
Management
User Login Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2
iv
OPERATION GUIDE
Contents
Job Accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14
Data Security Kit Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-27
Appendix
Optional Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-2
Character Entry Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-7
Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-18
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-28
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Index-1
OPERATION GUIDE
v
Quick Guide
Be sure to read Precautions for Use before using
this machine.
Administrator tasks
To make copies
It copies.
To print
Simply press the Start key to make
copies. You can also fine-tune the
copy settings by changing the
paper size, adjusting the density,
etc.
What
you want
to do
Copying with
specific
settings
It prints.
You can print via a network or print
a PDF file directly from USB
memory.
Printing Documents
Stored in Removable
USB Memory
Print
via a
network
Connecting Cables
Network Setup
(LAN Cable Connection)
Install the printer
driver on your
computer *1
Setup
Loading Paper...2-20
Placing Originals on
the Platen...2-32
Operation
Copying Functions
...4-1
Printing
Documents Stored
in Removable USB
Memory... 6-20
*1: For more information, refer to the Printer Driver User Guide.
vi
Printing Printing from
Applications
...3-22
Administrator tasks
To send documents
It sends.
You can send scanned images via a network. Or, you can also store scanned images in
USB memory.
What
you want
to do
Send to
Folder
(SMB)
Send
as
E-mail
Saving
Documents to
USB Memory
Connecting Cables
Network Setup (LAN Cable Connection)
Plug the USB
memory
Create a shared folder on the destination computer.
Setup
Editing Destination (Address Book/Adding
One Touch Keys)...8-60
Place the originals on the platen
Operation
Sending...3-24 *1
Sending Functions...5-1
Saving Documents
to USB Memory
(Scan to USB)...6-22
*1: If the destination is not stored in the address book, you can send by entering the address
directly.
vii
Administrator tasks
To send a FAX
As well as sending a FAX via the telephone lines, you can also send a FAX via a network.
It faxes.
NOTE: For more information on setting up and sending a FAX, refer to the FAX System
(S) Operation Guide.
What
you want
to do
FAX directly
from a
computer
Send a FAX
FAX without using the
telephone line
(Internet FAX (i-FAX))
Connect the modular cord for the
telephone line to this machine.
Selection of Telephone Line
(Inch version only)
Network Setup
(LAN Cable Connection)
Install the Network FAX
Driver on your computer *1
Setup
Using the Address Book...3-17
on the FAX System (S) Operation Guide
*2
Loading Paper...2-20
Operation
FAX Operation
(Basic)...3-1
on the FAX System (S)
Operation Guide
About Network
FAX...9-1
on the FAX System (S)
Operation Guide
Internet Fax (i-FAX)
(Optional)...8-1
on the FAX System (S)
Operation Guide
*1:For more information, refer to the Network FAX Driver Operation Guide.
*2: If the destination is not stored in the address book, you can send the FAX by entering the
address directly.
viii
Caution / Warning Labels
Caution / Warning labels have been attached to the machine at the following locations for safety purposes. Be
sufficiently careful to avoid fire or electric shock when removing a paper jam or when replacing toner.
High temperature inside. Do not
touch parts in this area, because
there is a danger of getting burned.
Do not touch the support area for the
document processor as there is a
danger that your fingers or other
objects may become caught or
pinched, and this can result in injury.
High temperature inside.
Do not touch parts in this
area, because there is a
danger of getting burned.
Label inside the machine
(Laser radiation warning)
Do not incinerate toner and toner
container. Dangerous sparks may
cause burn.
High temperature inside. Do not touch parts in this area,
because there is a danger of getting burned.
ix
NOTE: Do not remove these labels.
Installation Precautions
Environment
CAUTION
Avoid placing the machine on or in locations which are unstable or not level. Such locations may cause
the machine fall down or fall over. This type of situation presents a danger of personal injury or damage
to the machine.
Avoid locations with humidity or dust and dirt. If dust or dirt become attached to the power plug, clean
the plug to avoid the danger of fire or electrical shock.
Avoid locations near radiators, heaters or other heat sources, or locations near flammable items to
avoid the danger of fire.
To keep the machine cool and facilitate changing of parts and maintenance, allow access space as
shown below. Leave adequate space, especially around the rear cover, to allow air to be properly
ventilated out of the machine.
3 15/16"
10 cm
11 13/16"
30 cm
11 13/16"
30 cm
39 3/8"
100 cm
Other precautions
The service environmental conditions are as follows:
•
Temperature: 50 to 90.5 °F (10 to 32.5 °C), but humidity should be 70% or less when temperature is 90.5
°F (32.5 °C)
•
Humidity: 15 to 80%, but temperature should be 86 °F or less (30 °C or less) when humidity is 80%
However, adverse environmental conditions may affect the image quality. It is recommended to use the machine
at a temperature: around 60.8 to 80.6 °F or less (16 to 27 °C), humidity: around 36 to 65%. In addition, Avoid
the following locations when selecting a site for the machine.
The machine automatically detects and displays the following message when the environmental temperature is
too high or too low.
Message: "Warning for high temperature. Adjust the room temperature." or "Warning for low temperature.
Adjust the room temperature."
x
To use the machine under optimum conditions, adjust the temperature and the humidity of your room if the
message is displayed.
•
Avoid locations near a window or with exposure to direct sunlight.
•
Avoid locations with vibrations.
•
Avoid locations with drastic temperature fluctuations.
•
Avoid locations with direct exposure to hot or cold air.
•
Avoid poorly ventilated locations.
If the floor is delicate against casters, when this machine is moved after installation, the floor material may be
damaged.
During copying, some ozone is released, but the amount does not cause any ill effect to one’s health. If,
however, the machine is used over a long period of time in a poorly ventilated room or when making an
extremely large number of copies, the smell may become unpleasant. To maintain the appropriate environment
for copy work, it is suggested that the room be properly ventilated.
Power supply/Grounding the machine
WARNING
Do not use a power supply with a voltage other than that specified. Avoid multiple connections in the
same outlet. These types of situations present a danger of fire or electrical shock.
Plug the power cord securely into the mains power outlet and the power socket on the machine. A
buildup of dust around the prongs on the plug or contact between the prongs and metallic objects may
cause a fire or electric shock. Incomplete electrical contact could cause overheating and ignition.
Always connect the machine to an outlet with a ground connection to avoid the danger of fire or
electrical shock in case of an electric short. If an earth connection is not possible, contact your service
representative.
Other precautions
Connect the power plug to the closest outlet possible to the machine.
Handling of plastic bags
WARNING
Keep the plastic bags that are used with the machine away from children. The plastic may cling to their
nose and mouth causing suffocation.
xi
Precautions for Use
Cautions when using the machine
WARNING
Do not place metallic objects or containers with water (flower vases, flower pots, cups, etc.) on or near
the machine. This type of situation presents a danger of fire or electrical shock should they fall inside.
Do not remove any of the covers from the machine as there is a danger of electrical shock from high
voltage parts inside the machine.
Do not damage, break or attempt to repair the power cord. Do not place heavy objects on the cord,
pull it unnecessarily or cause any other type of damage. These types of situations present a danger
of fire or electrical shock.
Never attempt to repair or disassemble the machine or its parts as there is a danger of personal injury,
fire, electrical shock or exposure to the laser. If the laser beam escapes, there is a danger of it causing
blindness.
If the machine becomes excessively hot, smoke appears from the machine, there is an odd smell, or
any other abnormal situation occurs, there is a danger of fire or electrical shock. Turn the main power
switch off immediately, be absolutely certain to remove the power plug from the outlet and then contact
your service representative.
If anything harmful (paper clips, water, other fluids, etc.) falls into the machine, turn the main power
switch off immediately. Next, remove the power plug from the outlet to avoid the danger of fire or
electrical shock. Then contact your service representative.
Do not remove or connect the power plug with wet hands, as there is a danger of electrical shock.
Always contact your service representative for maintenance or repair of internal parts.
xii
CAUTION
Do not pull the power cord when removing it from the outlet. If the power cord is pulled, the wires may
become broken and there is a danger of fire or electrical shock. (Always grasp the power plug when
removing the power cord from the outlet.)
Always remove the power plug from the outlet when moving the machine. If the power cord is
damaged, there is a danger of fire or electrical shock.
Always hold the designated parts only when lifting or moving the machine.
If this machine will be left unused for an extended period (e.g. overnight), turn it off at the main power
switch. If the machine will not be used for an even longer period of time (e.g. vacation), remove the
power plug from the outlet as a safety precaution. If the optional Fax kit is installed, note that turning
the machine off at the main power switch disables fax transmission and reception.
For safety purposes, always remove the power plug from the outlet when performing cleaning
operations.
If dust accumulates within the machine, there is a danger of fire or other trouble. It is therefore
recommended that you consult with your service representative in regard to cleaning of internal parts.
This is particularly effective if accomplished prior to seasons of high humidity. Consult with your
service representative in regard to the cost of cleaning the internal parts of the machine.
Other precautions
Do not place heavy objects on the machine or cause other damage to the machine.
Do not open the front cover, turn off the main power switch, or pull out the power plug during copying.
When lifting or moving the machine, contact your service representative.
When moving the machine, please turn the four adjusters of the paper feeding unit until they reach the floor in
order to stabilize the machine.
Do not touch electrical parts, such as connectors or printed circuit boards. They could be damaged by static
electricity.
Do not attempt to perform any operations not explained in this guide.
Caution: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Do not look directly at the light from the scanning lamp as it may cause your eyes to feel tired or painful.
This machine comes equipped with an HDD (hard disk drive). Do not attempt to move the machine while the
power is still on. Since any resulting shock or vibration may cause damage to the hard disk, be sure to turn off
the power before attempting to move the machine.
In the event there is a problem with the machine’s HDD (hard disk drive), stored data may be erased. It is
recommended that important data be backed up on a PC or other media. Be also sure to store originals of
important documents separately.
xiii
Cautions when handling consumables
CAUTION
Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks may cause
burns.
Keep the toner container and the waste toner box out of the reach of children.
If toner happens to spill from the toner container or the waste toner box, avoid inhalation and ingestion,
as well as contact with your eyes and skin.
•
If you do happen to inhale toner, move to a place with fresh air and gargle thoroughly with a large amount of
water. If coughing develops, contact a physician.
•
If you do happen to ingest toner, rinse your mouth with water and drink 1 or 2 cups of water to dilute the
contents of your stomach. If necessary, contact a physician.
•
If you do happen to get toner in your eyes, flush them thoroughly with water. If there is any remaining
tenderness, contact a physician.
•
If toner does happen to get on your skin, wash with soap and water.
Do not attempt to force open or destroy the toner container or the waste toner box.
If the optional Fax kit is installed and the main power switch is off, transmitting/receiving Fax is disabled. Do not
turn off the main power switch, but press the Power key on the operation panel to enter Sleep.
Other precautions
Return the exhausted toner container and waste toner box to your dealer or service representative. The
collected toner container and waste toner box will be recycled or disposed in accordance with the relevant
regulations.
Store the machine while avoiding exposure to direct sunlight.
Store the machine in a place where the temperature stays below 40ºC while avoiding sharp changes of
temperature and humidity.
If the machine will not be used for an extended period of time, remove the paper from the cassette and the Multi
Purpose (MP) Tray, return it to its original package and reseal it.
xiv
SAFETY OF LASER BEAM (USA)
1. Safety of laser beam
This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards
established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the
product is safe to use during normal operation and maintenance. The laser optical system, enclosed in a
protective housing and sealed within the external covers, never permits the laser beam to escape.
2. The CDRH Act
A laser-product-related act was implemented on Aug. 2, 1976, by the Center for Devices and Radiological
Health (CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits the sale of laser products in
the U.S. without certification, and applies to laser products manufactured after Aug. 1, 1976. The label shown
below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the
United States. On this machine, the label is on the right.
xv
3. Optical unit
When checking the optical unit, avoid direct exposure to the laser beam, which is invisible. Shown at below is
the label located on the cover of the optical unit.
4. Maintenance
For safety of the service personnel, follow the maintenance instructions in the other section of this manual.
5. Safety switch
The power to the laser unit is cut off when the front cover is opened.
xvi
Safety Instructions Regarding the Disconnection of Power (the United
States)
Caution: The power plug is the main isolation device! Other switches on the equipment are only functional
switches and are not suitable for isolating the equipment from the power source.
Attention: Le débranchement de la fiche secteur est le seul moyen de mettre l’appareil hors tension. Les
interrupteurs sur l’appareil ne sont que des interrupteurs de fonctionnement: ils ne mettent pas l’appareil hors
tension.
WARNING (the United States)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
•
The use of a non-shielded interface cable with the referenced device is prohibited.
CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
* The above warning is valid only in the United States of America.
Radio Tag Technology (the United States)
In some countries the radio tag technology used in this equipment to identify the toner container may be subject to
authorization and the use of this equipment may consequently be restricted.
MERCURY WARNING (the United States)
THE LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF
ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
Other precautions (for users in California, the United States)
This product contains a CR Coin Lithium Battery which contains Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
xvii
Warranty (the United States)
250ci/300ci/400ci/500ci/552ci
COLOR MULTIFUNCTIONAL PRODUCT LIMITED WARRANTY
Kyocera Mita America, Inc. and Kyocera Mita Canada, Ltd. (both referred to as “Kyocera”) warrant
the Customer’s new color Multifunctional Product (referred to as “MFP”), and the new accessories
installed with the initial installation of the MFP, against any defects in material and workmanship for
a period of one (1) year, or 300,000 copies/prints from date of installation, whichever first occurs. In
the event the MFP or an accessory is found to be defective within the warranty period, Kyocera’s
only obligation and the Customer’s exclusive remedy shall be replacement of any defective parts.
Kyocera shall have no obligation to furnish labor.
This warranty covers Maintenance Kits and the components of Maintenance Kits included with the
original MFP for a period of one year or 300,000 copies/prints, whichever first occurs. Maintenance
Kits consist of the developing unit, the drum unit, the transfer belt, and the fixing unit. Replacement
Maintenance Kits have a 90 day Limited Warranty.
This warranty is valid only for the original retail purchaser (referred to as the “Customer”) of a new
Kyocera MFP in the United States of America or Canada, based upon the country of purchase.
In order to obtain performance of this warranty, the Customer must immediately notify the Authorized
Kyocera Dealer from whom the product was purchased. If the Kyocera Dealer is not able to provide
service, write to Kyocera at the address below for the name and address of the Authorized Kyocera
Dealer in your area, or check Kyocera’s website at http://www.kyoceramita.com.
This warranty does not cover MFPs or accessories which: (a) have become damaged due to
operator negligence, misuse, accidents, improper storage or unusual physical or electrical stress, (b)
have used parts or supplies which are not genuine Kyocera brand parts or supplies, (c) have been
installed or serviced by a technician not employed by Kyocera or an Authorized Kyocera Dealer, or
(d) have had the serial number modified, altered, or removed.
This warranty gives the Customer specific legal rights. The Customer may also have other rights,
which vary from state to state, or province to province. Neither the seller, nor any other person, is
authorized to extend the time period or expand this warranty on behalf of Kyocera.
THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS,
EXPRESS OR IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY
OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY SHALL NOT EXTEND TO, AND KYOCERA SHALL NOT BE LIABLE FOR, ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY ARISE OUT OF THE USE OF, OR
INABILITY TO USE, THE MFP.
xviii
Legal Restriction on Copying/Scanning
•
It may be prohibited to copy/scan copyrighted material without permission of the copyright owner.
•
Copying/Scanning the following items is prohibited and may be penalized by law.
It may not be limited to these items. Do not knowingly copy/scan the items that are not to be copied/
scanned.
Paper money
Bank note
Securities
Stamp
Passport
Certificate
•
Local laws and regulations may prohibit or restrict copying/scanning of other items not mentioned above.
xix
xx
Legal and Safety Information
Please read this information before using your machine. This chapter provides information on
the following topics.
•
•
•
•
•
•
•
Legal Information ................................................................................xxii
Regarding Trade Names....................................................................xxiii
Energy Saving Control Function .......................................................xxvii
Automatic 2-Sided Copy Function ....................................................xxvii
Paper Recycling................................................................................xxvii
Energy Star (ENERGY STAR®) Program.........................................xxvii
About this Operation Guide.............................................................. xxviii
xxi
Legal Information
Copying or other reproduction of all or part of this guide without the prior written consent of Kyocera Mita
Corporation is prohibited.
xxii
Regarding Trade Names
•
PRESCRIBE and KPDL are trademarks of Kyocera Corporation.
•
Microsoft, MS-DOS, Windows, Windows NT and Internet Explorer are registered trademarks of Microsoft
Corporation in the U.S.A. and/or other countries.
•
Windows Me, Windows XP and Windows Vista are trademarks of Microsoft Corporation.
•
PCL is a trademark of Hewlett-Packard Company.
•
Adobe Acrobat, Adobe Reader and PostScript are trademarks of Adobe Systems, Incorporated.
•
Ethernet is a registered trademark of Xerox Corporation.
•
Novell and NetWare are registered trademarks of Novell, Inc.
•
IBM and IBM PC/AT are trademarks of International Business Machines Corporation.
•
Power PC is a trademark of IBM in the U.S.A. and/or other countries.
•
AppleTalk is a registered trademark of Apple Computer, Inc.
•
This machine has been developed using embedded real-time operating system Tornado™ by Wind River
Systems, Inc.
•
TrueType is a registered trademark of Apple Computer, Inc.
•
TypeBankG-B, TypeBankM-M and Typebank-OCR are trademarks of TypeBank®.
•
All European language fonts installed in this machine are used under licensing agreement with Monotype
Imaging Inc.
•
Helvetica, Palatino and Times are registered trademarks of Linotype-Hell AG.
•
ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC ZapfDingbats are registered
trademarks of International Type-face Corporation.
•
UFST™ MicroType® fonts by Monotype Imaging Inc. are installed in this machine.
•
This machine contains the NF module developed by ACCESS Co., Ltd.
•
This machine contains the software having modules developed by Independent JPEG Group.
•
This product contains NetFront Browser of ACCESS CO., LTD.
•
ACCESS, ACCESS logo and NetFront are trademarks or registered trademarks of ACCESS CO., LTD.in
the United States, Japan and other countries.
•
© 2009 ACCESS CO., LTD. All rights reserved.
•
This software is based in part on the work of the Independent JPEG Group.
All other brands and product names are registered trademarks or trademarks of their respective companies. The
designations ™ and ® will not be used in this Operation Guide.
xxiii
GPL
Firmware of this machine is using in part the GPL applied codes (www.fsf.org/copyleft/gpl.html). Please access
“http://www.kyoceramita.com/gpl” for more information on how to make GPL applied codes available.
Open SSL License
Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1
Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3
All advertising materials mentioning features or use of this software must display the following
acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http:/
/www.openssl.org/)”
4
The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products
derived from this software without prior written permission.
For written permission, please contact openssl-core@openssl.org.
5
Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their
names without prior written permission of the OpenSSL Project.
6
Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes
software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
xxiv
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was
written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to.
The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code;
not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright
terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed.
If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library
used.
This can be in the form of a textual message at program startup or in documentation (online or textual) provided
with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the
following conditions are met:
1
Redistributions of source code must retain the copyright notice, this list of conditions and the following
disclaimer.
2
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3
All advertising materials mentioning features or use of this software must display the following
acknowledgment:
“This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)”
The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic
related :-).
4
If you include any Windows specific code (or a derivative thereof) from the apps directory (application
code) you must include an acknowledgment:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU
Public Licence.]
xxv
Monotype Imaging License Agreement
1
Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a
special format as well as the UFST Software.
2
You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles
and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary
business or personal purposes at the address stated on the registration card you return to Monotype
Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three
printers. If you need to have access to the fonts on more than three printers, you need to acquire a multiuser license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all
rights, title and interest to the Software and Typefaces and no rights are granted to you other than a
License to use the Software on the terms expressly set forth in this Agreement.
3
To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other
proprietary information concerning the Typefaces in strict confidence and to establish reasonable
procedures regulating access to and use of the Software and Typefaces.
4
You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup
copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the
original.
5
This License shall continue until the last use of the Software and Typefaces, unless sooner terminated.
This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License
and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this
License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the
Software and Typefaces and documentation as requested.
6
You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the
Software.
7
Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in
accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in
material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs,
errors and omissions.
The parties agree that all other warranties, expressed or implied, including warranties of fitness for a
particular purpose and merchantability, are excluded.
8
Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and
Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or
consequential damages, or any damages caused by abuse or misapplication of the Software and
Typefaces.
9
Massachusetts U.S.A. law governs this Agreement.
10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior
written consent of Monotype Imaging.
11 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in
Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or
subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions
applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms
and conditions. Neither party shall be bound by any statement or representation not contained in this
Agreement. No change in this Agreement is effective unless written and signed by properly authorized
representatives of each party. By opening this diskette package, you agree to accept the terms and
conditions of this Agreement.
xxvi
Energy Saving Control Function
The device comes equipped with a Low Power Mode where energy consumption is reduced after a certain
amount of time elapses since the device was last used, as well as a Sleep where printer and fax functions
remain in a waiting state but power consumption is still reduced to a minimum when there is no activity with the
device within a set amount of time.
Low Power Mode
The device automatically enters Low Power Mode when 3 minutes for 25/25 ppm, 30/30 ppm, 40/40 ppm and
50/40 ppm models, or 5 minutes for 55/50 ppm model have passed since the device was last used. The amount
of time of no activity that must pass before Low Power Mode is activated may be lengthened. For more
information refer to Low Power Mode and Auto Low Power Mode on page 2-9.
Sleep
The device automatically enters Sleep when 30 minutes for 25/25 ppm and 30/30 ppm models, 45 minutes for
40/40 ppm model, or 60 minutes for 50/40 ppm and 55/50 ppm models have passed since the device was last
used. The amount of time of no activity that must pass before Sleep is activated may be lengthened. For more
information see Sleep and Auto Sleep on page 2-10.
Automatic 2-Sided Copy Function
This device includes 2-sided copying as a standard function. For example, by copying two 1-sided originals onto
a single sheet of paper as a 2-sided copy, it is possible to lower the amount of paper used. For more information
see Duplex Copying on page 3-12.
Paper Recycling
This device supports the recycled paper which reduces the load on the environment. Your sales or service
representative can provide information about recommended paper types.
Energy Star (ENERGY STAR®) Program
We have determined as a participating company in the International Energy Star Program that
this product is compliant with the standards laid out in the International Energy Star Program.
xxvii
About this Operation Guide
This Operation Guide contains the following chapters.
Chapter 1 - Part Names
Identifies machine parts and operation panel keys.
Chapter 2 - Preparation before Use
Explains adding paper, placing originals, connecting the machine, and necessary configurations before first use.
Chapter 3 - Basic Operation
Describes the procedures for basic copying, printing and scanning.
Chapter 4 - Copying Functions
Describes the functions you can use when copying.
Chapter 5 - Sending Functions
Describes the functions you can use when sending originals.
Chapter 6 - Document Box
Provides a basic guide to using document boxes.
Chapter 7 - Status / Job Cancel
Explains how to check the job status and job history and how to cancel jobs being printed or waiting to print.
Also explains how to check the remaining paper and device status and how to cancel fax transmission
Chapter 8 - Default Setting (System Menu)
Describes the System Menu options for general machine operation.
Chapter 9 - Maintenance
Describes cleaning and toner replacement.
Chapter 10 - Troubleshooting
Explains how to handle error messages, paper jams and other problems.
Chapter 11 - Management
Explains user login administration and job accounting.
Appendix
Explains how to enter characters, and lists the machine specifications.
Introduces the convenient optional equipment available for this machine.
Provides information on media types and paper sizes. Also includes a glossary of terms.
xxviii
Conventions in This Guide
The following conventions are used depending on the nature of the description.
Convention
Description
Example
Bold
Indicates the operation panel
keys or a computer screen.
Press the Start key.
[Regular]
Indicates the touch panel keys.
Press [OK].
Italic
Indicates a message displayed
on the touch panel.
Ready to copy is displayed.
Used to emphasize a key word,
phrase or references to
additional information.
For more information refer to Sleep and
Auto Sleep on page 2-9.
Note
Important
Caution
Indicates supplemental
information or operations for
reference.
NOTE:
Indicates items that are required
or prohibited so as to avoid
problems.
IMPORTANT:
Indicates what must be
observed to prevent injury or
machine breakdown and how to
deal with it.
CAUTION:
Description of Operation Procedure
In this Operation Guide, continuous operation of the keys on the touch panel is as follows:
Description in this
Operation Guide
Actual procedure
Press [Copy].

Press [Next] of Quick Setup.

Press [ ] twice.

Press [Change] of Original Image.
Press [Copy], [Next] of Quick
Setup, [ ] twice, and then
[Change] of Original Image.
xxix
Originals and Paper Sizes
This section explains the notation used in this guide when referring to sizes of originals or paper sizes.
As with A4, B5 and Letter, which may be used either in the horizontal or vertical direction, horizontal direction is
indicated by an additional letter R in order to indicate the orientation of the original/paper.
Placement direction
Vertical direction
B
A
Indicated size *
A4, B5, A5, B6,
A6, 16K, Letter,
Statement
B
A
Original
Paper
For the originals/paper, dimension A is longer
than B.
Horizontal direction
B
A
A4-R, B5-R, A5-R,
B6-R, A6-R, 16KR, Letter-R,
Statement-R
B
A
Original
Paper
For the originals/paper, dimension A is shorter
than B.
*
The size of the original/paper that can be used depends on the
function and source tray. For further details, refer to the page
detailing that function or source tray.
Icons on the Touch Panel
The following icons are used to indicate originals and paper placement directions on the touch panel.
Placement direction
Originals
Vertical direction
Horizontal direction
xxx
Paper
1 Part Names
This chapter identifies the machine parts and operation panel keys.
•
•
Operation Panel ..................................................................................1-2
Machine ..............................................................................................1-4
1-1
Part Names
Operation Panel
Displays the Status/Job Cancel screen.
Displays the System Menu.
Displays number of sheets printed and number of pages scanned.
Displays help guidance.
Blinks during printing operation.
Blinks while data is transmitted.
Selects auto color mode.
Selects full color mode.
Selects black and white mode.
Displays the Copy screen.
Displays the screen for sending.
You can also change this to show the address book screen.
Switches the touch panel display to enlarged display in the
Copy screen or Send screen.
Displays the Document Box screen.
Displays the Application screen.
Displays the Program screen.
1-2
Part Names
Blinks while data is received.
Blinks while the machine is accessing the hard disk, fax memory or USB memory
(general-purpose item).
Lights or blinks when an error occurs and a job is stopped.
Displays the Interrupt Copy screen.
Ends operation (logs out) on the Administration screen.
Puts the machine into Low Power Mode.
Puts the machine into Sleep Mode.
Recovers from Sleep if in Sleep Mode.
Lit when the machine's
main power is on.
Returns settings to
their default states.
Numeric keys.
Enter numbers and symbols.
Clears entered numbers and characters.
Recalls already registered destinations and
programs for sending.
Finalizes numeric key entry, and finalizes screen during
setting of functions. Operates linked with the on-screen
[OK].
1-3
Cancels or pauses the
printing job in progress.
Starts copying and scanning
operations and processing for setting
operations.
1
Part Names
Machine
1
12
2
4
3
13
14
15
5
6
7
16
8
9
17
10
18
11
1
Original Cover (Option)
2
Platen
3
Original Size Indicator Plates
4
Slit Glass
5
Left Cover 1
6
Left Cover 1 Indicator
7
Left Cover 1 Lever
8
Left Cover 2 Indicator
9
Left Cover 2
10 Left Cover 3
11 Handles
12 Clip Holder
13 Operation Panel
14 Attention Indicator ... Lights or blinks when an error occurs and a job is stopped
15 Receive Indicator ... Blinks while data is received
16 Front Cover
17 Cassette 1
18 Cassette 2
1-4
Part Names
1
19
20
21
22
23
24
25
26
27
28
29
30
19 Toner Container Release Lever (Magenta)
20 Toner Container (Magenta)
21 Toner Container Release Lever (Cyan)
22 Toner Container (Cyan)
23 Toner Container Release Lever (Yellow)
24 Toner Container (Yellow)
25 Toner Container Release Lever (Black)
26 Toner Container (Black)
27 Cleaning Brush
28 Waste Toner Box
29 Waste Toner Tray
30 Release button
1-5
Part Names
32
34
31
33
41
42
43
44
45
35
40
36
37
31 Top Tray
32 USB Memory Slot (A1)
33 Paper Feed Unit Cover
34 Paper Feed Unit
35 Green Knob
36 Paper Width Adjusting Tab
37 Paper Length Guide
38 Handles
39 Multi Purpose Tray
40 Paper Width Guide
41 Option Interface Slot (OPT2)
42 USB Port (A2)
43 Network Interface Connector
44 USB Interface Connector (B1)
45 Option Interface Slot (OPT1)
46 Main Power Switch
1-6
38
39
46
2 Preparation before Use
This chapter explains the preparations before using this equipment for the first time as well
as the procedures for loading paper and originals.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Check the Accessories .......................................................................2-2
Determining the Connection Method and Preparing Cables...............2-3
Connecting Cables..............................................................................2-5
Power On/Off ......................................................................................2-7
Low Power Mode and Auto Low Power Mode ....................................2-9
Sleep and Auto Sleep .......................................................................2-10
Adjusting the Operation Panel Angle ................................................2-11
Switching the Language for Display [Language]...............................2-11
Setting Date and Time ......................................................................2-12
Network Setup (LAN Cable Connection) ..........................................2-13
Installing Software.............................................................................2-16
COMMAND CENTER (Settings for E-mail) ......................................2-17
Loading Paper...................................................................................2-20
Loading Originals ..............................................................................2-32
2-1
Preparation before Use
Check the Accessories
Check that the following accessories are included.
•
Operation Guide (This Guide)
•
Quick Guide to Adjusting Image Quality
•
CD-ROM (Product Library)
•
CD-ROM(TWAIN compatible application)
Documents Contained in the Included CD-ROM
The following documents are contained in the included CD-ROM (Product Library). Refer to them as necessary.
Documents
KYOCERA COMMAND CENTER Operation Guide
Printer Driver User Guide
Network FAX Driver Operation Guide
TWAIN/WIA Driver Operation Guide
KM-NET for Direct Printing Operation Guide
KMnet Viewer User Guide
Scan to SMB (PC) Setup Guide
PRESCRIBE Commands Technical Reference
PRESCRIBE Commands Command Reference
Data Security Kit (E) Operation Guide
FAX System (S) Operation Guide
2-2
Preparation before Use
Determining the Connection Method and Preparing Cables
Check the method to connect the equipment to a PC or network, and prepare the necessary cables.
2
Connection Example
Determine the method to connect the equipment to a PC or network by referring to the illustration below.
Connecting a scanner to your PC network with a network
cable (100BASE-TX or 10BASE-T)
Administrator’s
PC
KYOCERA COMMAND
CENTER
Network
Send E-mail
Sends the image data
of scanned originals to
the desired recipient
as a file attached to an
E-mail message.
Network settings, Scanner
default settings, User and
destination registration
MFP
Printing
Network
USB
Saves the scanned
image as a data file on
your PC.
Network
Network FAX
(Option)
Send SMB
Network
Network
Send FTP
Sends the scanned
image as a data file on
the FTP.
FAX (Option)
TWAIN Scanning
FAX
Network
WIA Scanning
Network
2-3
TWAIN and WIA are
standardized interface
for communication
between software
applications and image
acquisition devices.
Preparation before Use
Preparing Necessary Cables
The following interfaces are available to connect the equipment to a PC. Prepare the necessary cables
according to the interface you use.
Available Standard Interfaces
Function
Interface
Necessary Cable
Printer/Scanner
/Network FAX*
Network interface
LAN (10Base-T or
100Base-TX, Shielded)
Printer
USB interface
USB2.0 compatible cable
(Hi-Speed USB compliant,
Max. 5.0 m, Shielded)
*
Function available when using optional fax kit. For details on
Network FAX, refer to the Fax Kit Operation Guide.
2-4
Preparation before Use
Connecting Cables
Connecting LAN Cable (Optional)
Follow the steps below to connect a LAN cable to the machine.
1
When the machine is powered up, first press the
Power key on the operation panel. Check that the
Power indicator and the memory indicator are off.
After this, turn off the main power switch.
2
Connect the LAN cable to the network interface
located on right side of the body.
3
Connect the other end of the cable to the hub.
4
Configure the network. For details, refer to Network
Setup (LAN Cable Connection) on page 2-13.
Check that
the indicators
are off.
2-5
2
Preparation before Use
Connecting USB Cable
Follow the steps below to connect a USB cable to the machine.
1
When the machine is powered up, first press the
Power key on the operation panel. Check that the
Power indicator and the memory indicator are off.
After this, turn off the main power switch.
2
Connect the USB cable to the appropriate interface
located on the right side of the body.
3
Connect the other end of the cable to the PC.
Check that
the indicators
are off.
Connecting the Power Cable
Connect one end of the supplied power cable to the machine and the other end to a power outlet.
IMPORTANT: Only use the power cable that comes with the machine.
2-6
Preparation before Use
Power On/Off
Power On
2
When the main power indicator is lit...
Press the Power key.
When the main power indicator is off...
Open the main power switch cover and turn the main
power switch on.
NOTE: If the optional Data Security Kit is installed, a message might display indicating the security function is
being activated and time may be taken to start up when the power is turned on.
IMPORTANT: When turning off the main power switch, do not turn on the main power switch again immediately.
Wait more than 5 seconds, and then turn on the main power switch.
2-7
Preparation before Use
Power Off
Before turning off the main power switch, press the Power key on the operation panel to off. Make sure that the
Power key and the memory indicator are off before turning off the main power switch.
CAUTION: The hard disk may be operating when the Power key or Memory indicator is lit or blinking. Turning
off the main power switch while the hard disk is operating may cause damage.
Make sure
that the
indicators
are off.
In case of not using the machine for an extended period of time
CAUTION: If this machine will be left unused for an extended period (e.g. overnight), turn it off at the
main power switch. If the machine will not be used for an even longer period of time (e.g. vacation),
remove the power plug from the outlet as a safety precaution. If the optional Fax kit is installed, note that
turning the machine off at the main power switch disables fax transmission and reception.
CAUTION: Remove paper from the cassettes and seal it in the paper storage bag to protect it from humidity.
2-8
Preparation before Use
Low Power Mode and Auto Low Power Mode
Low Power Mode
To activate Low Power Mode, press the Energy Saver key. Touch panel and all indicators on the operation
panel will go out to save power except the Energy Saver, Power, and main power indicators. This status is
referred to as Low Power Mode.
If print data is received during Low Power Mode, the machine automatically wakes up and starts printing.
Also when fax data arrives while the machine is in Low Power Mode when using the optional fax, the machine
automatically wakes up and starts printing.
To resume, perform one of the following actions. The machine will be ready to operate within 30 seconds.
•
Press any key on the operation panel.
•
Open the original cover or the optional document
processor.
•
Place originals in the optional document processor.
Note that ambient environmental conditions, such as
ventilation, may cause the machine to respond more
slowly.
Auto Low Power Mode
Auto Low Power Mode automatically switches the machine into Low Power Mode if left idle for a preset time.
The default preset time is 3 minutes for 25/25 ppm model, 30/30 ppm model, 40/40 ppm model, and 50/40 ppm
model or 5 minutes for 55/50 ppm model.
2-9
2
Preparation before Use
Sleep and Auto Sleep
Sleep
To enter Sleep, press the Power key. Touch panel and
all indicators on the operation panel will go out to save
a maximum amount of power except the Main Power
indicator. This status is referred to as Sleep.
If print data is received during Sleep, the print job is
performed while the touch panel remains unlit.
When using the optional fax, received fax data is printed
out while the operation panel also remains unlit.
To resume, press the Power key. The 25/25 ppm or 30/
30 ppm model will be ready to use within 30 seconds,
the 40/40 ppm or 50/40 ppm model will be ready within
45 seconds, or the 55/50 ppm model will be ready within
57.5 seconds.
Note that ambient environmental conditions, such as
ventilation, may cause the machine to respond more
slowly.
Auto Sleep
Auto Sleep automatically switches the machine into Sleep if left idle for a preset time in the Low Power Mode.
The default preset time is 30 minutes for 25/25 ppm and 30/30 ppm models, 45 minutes for 40/40 ppm model,
or 60 minutes for 50/40 ppm model and 55/50 ppm models.
2-10
Preparation before Use
Adjusting the Operation Panel Angle
Adjust the angle of the operation panel in two as shown
by releasing the operation panel lock lever.
2
Switching the Language for Display [Language]
Select the language displayed on the touch panel.
Use the procedure below to select the language.
Common Settings - Language
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of
Language.
3
Press the key for the language you want to use.
4
Press [OK].
Set the language to use for the touch panel display.
English
Deutsch
Français
Nederlands
ǸțșșȒȐȑ
Português
Español
Italiano
Cancel
Status
OK
10/10/2008
10:10
The touch panel language will be changed.
2-11
Preparation before Use
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine
is used.
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter
a login user name and password, and press [Login]. Refer to Adding a User on page 11-5 for the default login
user name and password.
Be sure to set the time difference before setting the date and time.
If you change Date/Time setting, trial functions will be unavailable. For details, refer to Optional Functions on
page 8-83.
Date/Timer - Time Zone
1
Press the System Menu key.
2
Press [ ], [Date/Timer] and then [Change] of
Time Zone.
3
Select the region.
Set time zone.
Select the location nearest you.
NOTE: Press [
Time Zone
] or [
] to view the next region.
-12:00 International Date Line West
-11:00 Midway Island, Samoa
4
-10:00 Hawaii
Press [Off] or [On] of Summer Time and press [OK].
Summer Time
1/13
Off
-09:00 Alaska
-08:00 Pacific Time (US & Canada)
NOTE: If you select a region that does not utilize
summer time, the summer time setting screen will not
appear.
On
-07:00 Arizona
Cancel
OK
Status
10/10/2008
10:10
Date/Timer - Date/Time
5
Press [Change] of Date/Time.
6
Set the date and time. Press [+] or [–] in each
setting.
7
Press [OK].
Set the date and time.
2008
Year
10
Month
10
Day
Off
10
Hour
10
Minute
31
Second
Cancel
Status
OK
10/10/2008
10:10
2-12
Preparation before Use
Network Setup (LAN Cable Connection)
The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP
(IPv4), TCP/IP (IPv6), IPX/SPX, NetBEUI, IPSec, and AppleTalk. It enables network printing on the Windows,
Macintosh, UNIX, NetWare and other platforms.
This section explains the TCP/IP (IPv4) Setup and AppleTalk Setup procedures. For other network settings,
refer to the Network Setup on 8-73.
•
TCP/IP (IPv4) Setup...2-13
•
AppleTalk Setup...2-15
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter
a login user name and password, and press [Login]. Refer to Adding a User on page 11-5 for the default login
user name and password.
TCP/IP (IPv4) Setup (by Entering IP Addresses)
Set up TCP/IP to connect to the Windows network. Set the IP addresses, subnet masks, and gateway
addresses. The default settings are "TCP/IP Protocol: On, DHCP: On, Bonjour: Off, Auto-IP: On".
NOTE: Prior to the IP address entries, obtain permission from the network administrator.
Auto-IP is available with 55/50 ppm model.
Use the procedure below.
System - IPv4
Set TCP/IP (IPv4).
On
DHCP
IP Address
0.0.0.0
Subnet Mask
On
0.0.0.0
Default
Gateway
0.0.0.0
2
Press [System], [Next] of Network and then [Next]
of TCP/IP Setting.
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [DHCP].
7
Press [Off] of DHCP and then press [OK].
8
Press [Bonjour].
9
Press [Off] of Bonjour and then press [OK].
numeric keys.
Auto-IP
Bonjour
Cancel
Status
Press the System Menu key.
10 Press [IP Address] and enter the address using the
On
Off
1
11 Press [Subnet Mask] and enter the address using
OK
08/08/2009
10:10
the numeric keys.
12 Press [Default Gateway] and enter the address
using the numeric keys.
2-13
2
Preparation before Use
13 Check if all the address entries are correct and
press [OK].
14 After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-72.
DHCP Settings
Select whether or not to use the DHCP server. The default setting is On.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next]
of TCP/IP Setting.
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [DHCP].
7
Press [On] or [Off] of DHCP and then press [OK].
8
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-72.
Bonjour Settings
Select whether or not to use Bonjour. The default setting is Off.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next]
of TCP/IP Setting.
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [Bonjour].
7
Press [On] or [Off] of Bonjour and then press [OK].
2-14
Preparation before Use
8
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-72.
Auto-IP Settings
Select whether or not to use Auto-IP. The default setting is On.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next]
of TCP/IP Setting.
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [Auto-IP].
7
Press [On] or [Off] of Auto-IP and then press [OK].
8
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-72.
AppleTalk Setup
Select the Apple Talk network connection. The default setting is On.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then
[Change] of AppleTalk.
3
Press [On] or [Off].
4
Press [OK].
5
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-72.
2-15
2
Preparation before Use
Installing Software
Install appropriate software on your PC from the included Product Library CD-ROM (Product Library) if you want
to use the printer function of this machine or perform TWAIN / WIA transmission or FAX transmission from your
PC.
NOTE: Installation on Windows must be done by a user logged on with administrator privileges.
Plug and Play is disabled on this device when in Sleep. Wake the device from Low Power Mode or Sleep before
continuing. See Low Power Mode and Auto Low Power Mode on page 2-9 and Sleep and Auto Sleep on page
2-10.
2-16
Preparation before Use
COMMAND CENTER (Settings for E-mail)
COMMAND CENTER is a tool used for tasks such as verifying the operating status of the machine and changing
the settings for security, network printing, E-mail transmission and advanced networking.
2
NOTE: Here, information on the FAX settings has been omitted. For more information on using the FAX, refer
to the Fax Kit Operation Guide.
The procedure for accessing COMMAND CENTER is explained below.
1
Launch your Web browser.
2
In the Address or Location bar, enter the machine’s IP address.
E.g.) http://192.168.48.21/
The web page displays basic information about the machine and COMMAND CENTER as well as their
current status.
3
Select a category from the navigation bar on the left of the screen. The values for each category must be
set separately.
If restrictions have been set for COMMAND CENTER, enter the correct user name and password to access
pages other than the startup page.
For details, refer to the KYOCERA COMMAND CENTER Operation Guide.
2-17
Preparation before Use
Sending E-mail
Specifying the SMTP settings allows you to send images loaded onto this machine as E-mail attachments.
To use this function, this machine must be connected to a mail server using the SMTP protocol.
Before sending images loaded onto this machine as E-mail attachments, check the following:
•
•
•
The network environment used to connect this machine to the mail server
A full-time connection via a LAN is recommended.
SMTP Settings
Use COMMAND CENTER to register the IP address or host name of the SMTP server.
If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.
The procedure for specifying the SMTP settings is explained below.
1
Click Advanced -> SMTP -> General.
2-18
Preparation before Use
2
Enter the correct settings in each field.
The settings to be specified in the SMTP settings screen are shown below.
Item
SMTP Protocol
Enables or disables SMTP protocol. To use E-mail, this protocol must be
enabled.
SMTP Port Number
Set the SMTP Port Number or use the SMTP default port 25.
SMTP Server Name
Enter the SMTP server IP address or its name. The maximum length of the
SMTP server name and IP address is 64 characters. If entering the name, a DNS
server address must also be configured. The DNS server address may be
entered on the TCP/IP General tab.
SMTP Server Timeout
Set the amount of time to wait before time-out in seconds.
Authentication
Protocol
Enables or disables the SMTP authentication protocol or sets POP before SMTP
as the protocol. The SMTP authentication supports Microsoft Exchange 2000.
Authenticate as
Authentication can be set from three POP3 accounts or you can choose a
different account.
Login User Name
When Other is selected for Authenticate, the login user name set here will be
used for SMTP authentication. The maximum length of the login user name is
64 characters.
Login Password
When Other is selected for Authenticate, the password set here will be used for
authentication. The maximum length of the login password is 64 characters.
POP before SMTP
Timeout
Test
3
Description
Set the amount of time to wait before time-out in seconds when you have
selected POP before SMTP as the Authentication Protocol.
This will test if the SMTP connection can be successfully established.
E-mail Size Limit
Enter the maximum size of E-mail that can be sent in kilobytes. When the value is
0, the limitation for E-mail size is disabled.
Sender Address
Enter the E-mail address of the person responsible for the machine, such as the
machine administrator, so that a reply or non-delivery report will go to a person
rather than to the machine. The sender address must be entered correctly for
SMTP authentication. The maximum length of the sender address is
128 characters.
Signature
Enter the signature. The signature is free form text that will appear at the end of
the E-mail body. It is often used for further identification of the machine. The
maximum length of the signature is 512 characters.
Domain Restriction
Enter the domain names that can be permitted or rejected. The maximum length
of the domain name is 32 characters. You can also specify E-mail addresses.
Click Submit.
2-19
2
Preparation before Use
Loading Paper
Paper can be loaded standardly in the two cassettes and the multi purpose tray. A paper feeder is also available
as an option (refer to Optional Equipment on Appendix-2).
Before Loading Paper
When you open a new package of paper, fan the sheets
to separate them slightly prior to loading in the following
steps.
1
Bend the whole set of sheets to swell them in the
middle.
2
Hold the stack at both ends and stretch it while
keeping the entire stack risen.
3
Raise the right and left hands alternately to create
a gap and feed air between the paper.
4
Finally, align the paper on a level, flat table.
If the paper is curled or folded, straighten it before
loading. Paper that is curled or folded may cause a
jam.
CAUTION: If you copy onto used paper (paper already
used for copying), do not use paper that is stapled or
clipped together. This may damage the machine or
cause poor image quality.
NOTE: If printouts are curled or not neatly stapled,
turn the stack in the cassette upside down.
Avoid exposing opened paper to high temperatures
and high humidity as dampness can be a cause of
problems. Seal any remaining paper after loading
in the multi purpose tray or cassettes back in the
paper storage bag.
If the machine will not be used for a prolonged
period, protect all paper from humidity by removing
it from the cassettes and sealing it in the paper
storage bag.
NOTE: If you use special paper such as letterhead,
paper with holes or paper with pre-prints like logo or
company name, refer to the Paper on Appendix-10.
2-20
Preparation before Use
Loading Paper in the Cassettes
The 2 standard cassettes will each hold plain paper, recycled paper or color paper.
Cassette 1 holds up to 500 sheets of A4 or smaller plain paper (80 g/m2) or up to 250 sheets of B4 or larger
plain paper (80 g/m2). Cassette 2 holds up to 500 sheets of plain paper (80 g/m2) (or up to 550 sheets of 64 g/
m2 plain paper).
The following paper sizes are supported: Ledger, Legal, Oficio II, 8.5×13.5", Letter, Letter-R, Statement, A3,
B4, A4, A4-R, B5, B5-R, A5, Folio, 8K, 16K, and 16K-R.
IMPORTANT:
•
For clearer and brighter color copies, use the special color paper.
You should not use inkjet printer paper or any paper with a special surface coating. (Such paper may cause
paper jams or other faults.)
•
When using media types other than plain paper (such as recycled or colored paper), always specify the
media type setting. (Refer to Specifying Paper Size and Media Type for the Cassettes on page 2-28)
The cassettes can hold paper with weights up to 163 g/m2. If you are using a paper weight between 106
and 163 g/m2, set the media type to Thick.
•
Do not load thick paper that is heavier than 163 g/m2 in the cassettes. Use the multi purpose tray for paper
that is heavier than 163 g/m2.
1
Pull the cassette out toward you until it stops.
NOTE: Do not pull out more than one cassette at a
time.
2
Using the paper length guide, move the plate to fit
the paper.
When loading A4 or smaller paper into cassette 1,
lift up the paper length guide. For B4 or larger
paper, lower the paper length guide.
NOTE: Paper sizes are marked on the cassette.
2-21
2
Preparation before Use
3
Holding the paper width adjusting tab, move the
paper width guides to fit the paper.
NOTE: Paper sizes are indicated on the cassettes.
To change between inch size and metric size (A, B
sizes), follow the steps below to adjust the size switch.
A
B
1. Holding the paper width adjusting tab, move the
paper width guide to a position other than that of the
paper.
2. Turn the size switch A 90°.
>
3. Move the size lever B up (C) or down (I).
C:metric size (centimeters) (A, B sizes)
I:inch size
4. Turn the size switch 90°to lock it.
>
4
2-22
Align the paper flush against the left side of the
cassette.
Preparation before Use
IMPORTANT:
•
Before loading the paper, be sure that it is not
curled or folded. Paper that is curled or folded may
cause paper jams.
•
Ensure that the loaded paper does not exceed the
level indicator (see illustration below).
•
When loading the paper, keep the side that was
closest the package seal facing up.
•
The paper length and width guides must be
adjusted to the paper size. Loading the paper
without adjusting these guides may cause skewed
feeding and paper jams.
•
Be sure that the paper length and width guides rest
securely against the paper. If there is a gap,
readjust the guides to fit the paper.
5
Insert the appropriate paper size card in the slot to
indicate the size of the paper inside.
6
Gently push the cassette back in.
NOTE: If the machine will not be used for a prolonged
period, protect all paper from humidity by removing it
from the cassettes and sealing it in the paper storage
bag.
7
2-23
Select the media type (plain, recycled, etc.) loaded
in the cassette. (Refer to Specifying Paper Size
and Media Type for the Cassettes on page 2-28.)
2
Preparation before Use
Loading Paper in the Multi Purpose Tray
The multi purpose tray will hold up to 100 sheets of A4 or smaller plain paper (80 g/m2) or up to 50 sheets of
plain paper (80 g/m2) lager than A4.
The multi purpose tray accepts paper sizes from A3 to A6 and Hagaki and from Ledger to Statement-R, 8K, 16K
and 16K-R. Be sure to use the multi purpose tray when you print on any special paper.
IMPORTANT: When using media types other than plain paper (such as recycled or colored paper), always
specify the media type setting. (Refer to Specifying Paper Size and Media Type for the Multi Purpose Tray on
page 2-30.) If you are using a paper weight of 106 g/m2 or more, set the media type to Thick.
The capacity of the multi purpose tray is as follows.
•
A4 or smaller plain paper (80 g/m2), recycled paper or color paper: 100 sheets
•
B4 or larger plain paper (80 g/m2), recycled paper or color paper: 50 sheets
•
Hagaki: 30 sheets
•
OHP film: 10 sheets
•
Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Monarch, Youkei 4, Youkei 2: 10 sheets
NOTE: When you load custom size paper, enter the paper size by referring to Specifying Paper Size and
Media Type for the Multi Purpose Tray on page 2-30.
When you use special paper such as transparencies or thick paper, select the media type by referring to
Specifying Paper Size and Media Type for the Multi Purpose Tray on page 2-30.
1
Open the multi purpose tray.
2
When loading paper sizes from A3 to B4 and
Ledger to Legal, extend the support tray section of
the multi purpose tray.
2-24
Preparation before Use
3
Adjust the paper width guides to the width of the
paper.
2
4
Insert the paper along the paper width guides into
the tray until it stops.
IMPORTANT: Keep the side that was closest the
package seal facing up.
Curled paper must be uncurled before use.
Straighten the top edge if it is curled.
When loading paper into the multi purpose tray, check
that there is no paper left over in the tray from a previous
job before loading the paper. If there is just a small
amount of paper left over in the multi purpose tray and
you want to add more, first remove the left-over paper
from the tray and include it with the new paper before
loading the paper back into the tray.
2-25
Preparation before Use
Loading Envelopes
Up to 10 envelopes may be loaded in the multi purpose tray.
Acceptable envelope sizes are as follows.
Acceptable Envelope
Size
Monarch
3 7/8"×7 1/2"
Envelope #10 (Commercial #10)
4 1/8"×9 1/2"
Envelope DL
110×220 (mm)
Envelope C5
162×229 (mm)
Youkei 2
162×114 (mm)
Youkei 4
235×105 (mm)
1
Open the multi purpose tray.
2
Adjust the paper width guides to the width of the
envelope.
3
For landscape form envelopes, close the flap.
Insert the envelope all the way along the width
guides, keeping the printing side face-up and the
edge with the flap facing towards you.
For portrait form envelopes, close the flap. Insert
the envelope all the way along the width guides,
keeping the printing side face-up and the edge with
the flap facing the insertion slot.
2-26
Preparation before Use
When you load envelopes or cardstock in the multi purpose tray
Load envelope with the print side facing up.
2
Landscape form
envelopes
Close the flap.
Portrait form envelopes
Close the flap.
Cardstock (Hagaki)
Return postcard (Oufuku Hagaki)
IMPORTANT: Use unfolded return postcard (Oufuku Hagaki).
Close the lap of envelopes.
IMPORTANT: How to load envelopes (orientation and
facing) will differ depending on the type of envelope. Be
sure to load it in correctly, otherwise printing may be
done in the wrong direction or on the wrong face.
NOTE: When you load envelopes in the multi purpose
tray, select the envelope type by referring to Specifying
Paper Size and Media Type for the Multi Purpose
Tray on page 2-30.
2-27
Preparation before Use
Specifying Paper Size and Media
The default paper size setting for cassettes 1 and 2, for multi purpose tray and for the optional paper feeder
(cassettes 3 and 4) is [Auto], and the default media type setting is [Plain].
To fix the type of paper to be used in cassettes, specify the paper size and media type setting. (Refer to
Specifying Paper Size and Media Type for the Cassettes on page 2-28.)
To fix the type of paper to be used in multi purpose tray, specify the paper size setting. (Refer to Specifying
Paper Size and Media Type for the Multi Purpose Tray on page 2-30.)
Specifying Paper Size and Media Type for the Cassettes
To fix the type of paper to be used in cassettes 1 or 2 or the optional paper feeder (cassettes 3 and 4), specify
the paper size. Also, you use a media type other than plain paper, specify the media type setting.
Selection Item
Paper
Size
Auto
Paper size is automatically detected and
selected. Select whether the paper is in Metric
size or in Inch size.
Standard
Sizes 1
Select from the standard sizes. Selectable paper
sizes are as follows.
Inch size: Ledger, Letter-R, Letter, Legal,
Statement-R, 8.5×13.5" and Oficio II
Metric size: A3, B4, A4, A4-R, B5, B5-R, A5-R,
and Folio
Standard
Sizes 2
Select from the standard sizes not included in
Standard Sizes 1. Selectable paper sizes are as
follows.
Inch size: A3, B4, A4, A4-R, B5, B5-R, A5-R,
Folio, 8K, 16K-R and 16K
Metric size: Ledger, Letter-R, Letter, Legal,
Statement-R, 8.5×13.5", Oficio II, 8K, 16K-R and
16K
Media Type
*
**
Selectable Size/Type
Plain (105 g/m2 or less), Rough, Vellum (64 g/m2
or less), Recycled, Preprinted**, Bond*, Color,
Prepunched**, Letterhead**, Thick (106 g/m2 and
more)*, High Quality and Custom 1~8*
To change to a media type other than Plain, refer to Paper Weight on
page 8-7. When the paper weight settings shown below are
selected, the media indicated for each setting cannot be selected.
• Bond: Heavy 3
• Thick: Heavy 3 or Extra Heavy
• Custom 1 to 8: Heavy 3 or Extra Heavy
To print on preprinted or prepunched paper or on letterhead, refer to
Special Paper Action on page 8-10.
NOTE: If the optional FAX kit is installed, the available media types for printing received faxes are as shown
below.
Plain, Recycled, Bond, Color, High Quality, Rough and Custom 1 to 8
2-28
Preparation before Use
1
Press the System Menu key.
2
2
Press [Common Settings], [Next] of Original /
Paper Settings, [Next] of Cassette Setting.
3
Cassette Setting, select one of [Cassette 1] to
[Cassette 4] and press [Next].
Then press [Change] of Paper Size.
NOTE: [Cassette 3] and [Cassette 4] are shown when
the optional paper feeder is installed.
4
For automatic detection of the paper size, press
[Auto] and select [Metric] or [Inch] as the unit.
To select the paper size, press [Standard Sizes 1]
or [Standard Sizes 2] and select the paper size.
Common Settings - Paper Size
Set cassette paper size.
Auto
Ledger
Letter
Letter
Standard
Sizes 1
Statement
8.5x13.5"
OficioII
5
Press [OK]. The previous screen reappears.
6
Press [Change] of Media Type and select the
media type. Then press [OK].
Legal
Standard
Sizes 2
Cancel
OK
Status
10/10/2008
10:10
Common Settings - Media Type
Select type of paper in Cassette 1.
Plain
Rough
Recycled
Preprinted
Prepunched
Letterhead
Custom 1
Custom 2
Custom 3
Custom 6
Custom 7
Custom 8
Vellum
Bond
Color
Thick
High Quality
Custom 4
Custom 5
Cancel
Status
OK
10/10/2008
10:10
2-29
Preparation before Use
Specifying Paper Size and Media Type for the Multi Purpose Tray
To fix the type of paper to be used in the multi purpose tray, specify the paper size.When using other than a
plain paper, specify the media type.
Item
Paper
Size
Auto
Paper size is automatically detected and selected.
Select whether the paper is in Metric size or in Inch size.
Standard
Sizes 1
Select from the standard sizes. Selectable paper sizes
are as follows.
Inch size: Ledger, Letter-R, Letter, Legal, Statement-R,
Executive, 8.5×13.5" and Oficio II
Metric size: A3, A4-R, A4, A5-R, A6-R, B4-R, B5-R, B5,
B6-R and Folio
Standard
Sizes 2
Select from the standard sizes not included in Standard
Sizes 1. Selectable paper sizes are as follows.
Inch size: A3, A4-R, A4, A5-R, A6-R B4-R, B5-R, B5,
B6-R, Folio, 8K, 16K-R and 16K
Metric size: Ledger, Letter-R, Letter, Legal, Statement-R,
Executive, 8.5×13.5", Oficio II, 8K, 16K-R and 16K
Others
Select from special standard sizes and custom sizes.
Selectable paper sizes are as follows.
ISO B5, Envelope #10 (Commercial #10), Envelope #9
(Commercial #9), Envelope #6 (Commercial #6 3/4),
Envelope Monarch, Envelope DL, Envelope C5,
Envelope C4, Hagaki, Oufuku Hagaki, Youkei 4,
Youkei 2
Size
Entry
Enter the size not included in the standard size.
Selectable paper sizes are as follows.
Inch size
X (Horizontal): 5.83~17" (in 0.01" increments),
Y (Vertical): 3.86~11.69" (in 0.01" increments)
Metric size
X (Horizontal): 148~432 mm (in 1mm increments),
Y (Vertical): 98~297 mm (in 1mm increments)
Media Type
*
**
Description
Selectable media types are as follows.
Plain (105g /m2 or less), Rough, Transparency,
Vellum (64 g/m2 or less), Labels, Recycled, Preprinted**,
Bond, Cardstock, Color, Prepunched**, Letterhead**,
Envelope, Thick (106 g/m2 and more), Coated,
High Quality and Custom 1~8
To change to a media type other than Plain, refer to Paper Weight on page
8-7.
To print on preprinted or prepunched paper or on letterhead, refer to Special
Paper Action on page 8-10.
NOTE: If the optional FAX kit is installed and the multi purpose tray is used to print a received FAX, the
available media types are as shown below.
Plain, Recycled, Bond, Color, High Quality, Rough and Custom 1 to 8
2-30
Preparation before Use
1
Press the System Menu key.
2
Common Settings - Multi Purpose Tray Setting
2
Press [Common Settings], [Next] of Original /
Paper Settings, [Next] of MP Tray Setting, and then
[Change] of Paper Size.
3
For automatic detection of the paper size, press
[Auto] and select [Metric] or [Inch] as the unit.
Set the multi-purpose tray paper size.
Auto
Ledger
Letter
Letter
Legal
Standard
Sizes 1
Statement
Executive
8.5x13.5"
OficioII
To select the paper size, press any of [Standard
Sizes 1], [Standard Sizes 2], [Others] or [Size
Entry] and select the paper size.
Standard
Sizes 2
Others
Size Entry
Cancel
OK
Status
10/10/2008
10:10
If you have chosen [Size Entry], press [+] or [–] to
enter X (horizontal) and Y (vertical) sizes. You may
enter the size directly using the numeric keys by
pressing [# Keys].
Common Settings - Paper Size
Set the multi-purpose tray paper size.
Auto
X(5.83 - 17.00)
Standard
Sizes 1
17
Y(3.86 - 11.69)
"
11
"
4
Press [OK]. The previous screen reappears.
5
Press [Change] of Media Type and select the
media type. Then press [OK].
Standard
Sizes 2
Others
# Keys
# Keys
Size Entry
Cancel
OK
Status
10/10/2008
10:10
Common Settings - Media Type
Select type of paper in Multi-Purpose Tray.
Plain
Transparency
Rough
Vellum
Labels
Recycled
Preprinted
Bond
Cardstock
Color
Prepunched
Letterhead
Envelope
Thick
Coated
Custom 4
High Quality
Custom 1
Custom 2
Custom 3
Custom 5
Custom 6
Custom 7
Custom 8
Cancel
Status
OK
10/10/2008
10:10
2-31
Preparation before Use
Loading Originals
Follow the steps below to load originals for copying, sending or storing.
Placing Originals on the Platen
You may place books or magazines on the platen in addition to ordinary sheet originals.
1
Open the original cover.
NOTE: If the optional document processor is installed,
open the document processor. Before opening the
document processor, be sure that there are no originals
left on the original table or on the original eject table.
Originals left on the original table or on the original
eject table may fall off when the document processor is
opened.
Keep the document processor open if the original is
40 mm (1 5/8") or thicker.
2
2-32
Place the original. Put the scanning side facedown
and align it flush against the original size indicator
plates with the back left corner as the reference
point.
Preparation before Use
 Original size indicator plates
(Inch models)
2
(Metric models)
3
Close the original cover.
IMPORTANT: Do not push the original cover forcefully
when you close it. Excessive pressure may crack the
platen glass.
NOTE: Shadows may be produced around the edges
and in the middle of open-faced originals.
CAUTION: Do not leave the document processor open
as there is a danger of personal injury.
2-33
Preparation before Use
Loading Originals in the Document Processor
The optional document processor automatically scans each sheet of multiple originals. Both sides of two-sided
originals are scanned.
Part Names of the Document Processor
(1)
(2)
(3)
(4)
(1) Original placement indicator
(5)
(6)
(4) Original table
(2) Top cover
(3) Original width guides
(5) Original eject table
(6)
(7)
Original stopper
(7) Opening handle
Originals Supported by the Document Processor
The document processor supports the following types of originals.
Weight
45 to 160 g/m2 (duplex: 50 to 120 g/m2)
Size
Maximum A3 to Minimum A5
Maximum Ledger to Minimum Statement-R
Capacity
Plain paper (80 g/m2), Colored paper, Recycled paper:
100 sheets (Mixed size originals: 30 sheets)
Thick paper (120 g/m2): 66 sheets
Thick paper (160 g/m2): 50 sheets
Art paper: 1 sheet
High quality paper (110 g/m2): 72 sheets
Originals Not Supported by the Document Processor
Do not use the document processor for the following types of originals.
•
Soft originals such as vinyl sheets
•
Transparencies such as OHP film
•
Carbon paper
•
Originals with very slippery surfaces
•
Originals with adhesive tape or glue
•
Wet originals
•
Originals with correction fluid which is not dried
•
Irregularly shaped (non-rectangular) originals
•
Originals with cut-out sections
•
Crumpled paper
•
Originals with folds (Straighten the folds before loading. Failure to do so may cause the originals to jam).
•
Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases
before loading. Failure to do so may cause the originals to jam).
2-34
Preparation before Use
How to Load Originals
IMPORTANT: Before loading originals, be sure that there are no originals left on the original eject table.
Originals left on the original eject table may cause the new originals to jam.
1
Adjust the original width guides to fit the originals.
2
Place the originals. Put the side to be scanned (or
the first side of two-sided originals) face-up. Slide
the leading edge into the document processor as
far as it will go. The original placement indicator will
be lit.
IMPORTANT: Confirm that the original width guides
exactly fit the originals. If there is a gap, readjust the
original width guides. The gap may cause the originals
to jam.
Ensure that loaded originals do not exceed the
level indicator. Exceeding the maximum level may
cause the originals to jam (see the figure).
Originals with punched holes or perforated lines
should be placed in such a way that the holes or
perforations will be scanned last (not first).
Original placement indicator
The original placement indicator is lit or unlit depending
on how originals are placed.
Indications and their status are as follows.
•
•
•
2-35
Green (left indicator) lit: Original is placed
properly.
Green (left indicator) blinking: Original is not
placed properly. Remove and place again.
Red (right indicator) blinking: Original is jammed.
Remove the jammed original and place it properly.
2
Preparation before Use
2-36
3 Basic Operation
This chapter explains the following operations.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Login/Logout .......................................................................................3-2
Enter key and Quick No. Search key ..................................................3-3
Touch Panel Display ...........................................................................3-4
Original Preview..................................................................................3-5
Selecting Color Mode..........................................................................3-6
Copying...............................................................................................3-7
Printing - Printing from Applications..................................................3-22
Sending.............................................................................................3-24
Specifying Destination ......................................................................3-30
Using Document Box ........................................................................3-33
Basic Operation for Document Box...................................................3-35
Canceling Jobs .................................................................................3-42
Quick Setup Screen ..........................................................................3-43
Program (Copying and Sending) ......................................................3-46
Registering Shortcuts (Copy, Send, and Document Box Settings) ...3-48
Using the Internet Browser ...............................................................3-49
3-1
Basic Operation
Login/Logout
If user login administration is enabled, it is necessary to enter the login user name and password to use the
machine.
NOTE: You will be unable to login if you forget your login user name or login password. In this event, login with
administrator privileges and change your login user name or login password.
Login
1
Enter login user name and password.
Login to:
Local
Login
User Name
abcdef
Login
Password
********
If the screen shown appears during operations,
press [Login User Name].
Press [# Keys] to enter the login data using the
numeric keys.
# Keys
# Keys
IC Card
Login
Check Counter
Status
Cancel
Login
10/10/2008
10:10
2
Enter the login user name and press [OK].
NOTE: Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
3
Press [Login Password].
Press [# Keys] to enter the login data using the
numeric keys.
4
Enter the password and press [OK].
5
Check the login user name and password are
correct, and press [Login].
NOTE: If Network Authentication is selected as the
user authentication method, either Local or Network
can be selected as the authentication destination.
Logout
To logout from the machine, press the Logout key to
return to the login user name/password entry screen.
3-2
Basic Operation
Enter key and Quick No. Search key
This section explains how to use the Enter key and Quick No. Search key on the operation panel.
Using the Enter (
) key
The Enter key works in the same way as keys displayed on the touch panel, such as [OK] and [Close].
The Enter symbol ( ) is displayed next to the keys whose operations are carried out by the Enter key (e.g.
[ OK], [ Close]).
The operation of the Enter key is explained below using copy paper selection as an example. For details of the
procedure, refer to Paper Selection on page 4-3.
1
Copies
Ready to copy.
In the paper selection screen, press the key for the
cassette containing the required paper size.
Paper Selection
Place original.
Original
Zoom
Paper
The Enter ( ) symbol appears on the [OK] on the
touch panel, indicating that the Enter key performs
the same action as [OK].
Auto
: --: 100%
: ---
Letter
Plain
Letter
Plain
Ledger
Plain
MP Tray
Setting
2
Letter
Plain
To copy using the selected paper, press the Enter
key (or [OK]).
Letter
Plain
Preview
Cancel
Add Shortcut
OK
Status
10/10/2008
Using the Quick No. Search (
10:10
) key
Use the Quick No. Search keys to perform an action by simply entering a number directly using the numeric
keys. For example, you can specify the speed dial for a transmission destination or recall a stored program by
its program number.
The Quick No. Search key performs the same action as the [No.] displayed on the touch panel.
The use of the Quick No. Search key is explained below using an example in which a speed dial number is
specified and used to select a destination. For more information on speed dialing, refer to Specifying
Destination on page 3-30.
Ready to send.
Destination
1
Press the Quick No. Search key (or [No.]) in the
basic send screen.
2
In the number entry screen, use the numeric keys
to enter the speed dial number.
3
If you entered speed dial number between 1 and 3
digits long, press the Enter key (or [OK]).
Place original.
Destination
Detail
Address
Book
1234567890
A OFFICE
1/10
B OFFICE
Enter One Touch key number
using # keys.
C OFFICE
Folder Path
Entry
(0001 - 1000)
On Hook
Direct
0011
BBB
Cancel
0006
FFF
0007
GGG
Destination
Status
The specified destination appears in the
destination list.
FAX No.
Entry
00
0001
AAA
E-mail
Addr Entry
HHH
Quick Setup
i-FAX
Addr Entry
OK
0008
0009
III
Original/Sending
Data Format
0010
1/100
JJJ
Color/
Image Quality
WSD Scan
Advanced
Setup
08/08/2009
10:10
NOTE: If you enter a 4-digit speed dial number, the
operation in step 3 can be omitted. The basic send
screen appears and the specified destination appears
in the destinations list.
3-3
3
Basic Operation
Touch Panel Display
Display for Originals and Paper
The touch panel displays the selected paper source and output tray.
Press Start key to start printing.
Copies
1
Press [Cancel] to change settings.
Original position
Copy Image
Output
tray
Paper
source
Size/orientation of
original and paper
Auto
Original
Zoom
Paper
: Letter
: 100%
: Letter
Cancel
Quick Setup
Paper
Selection
2-sided
>>2-sided
Duplex
Org./Paper/
Finishing
100%
Normal 0
Zoom
Shortcut 1
Shortcut 2
Shortcut 3
Shortcut 4
Density
Shortcut 5
2 in 1
Combine
Color/
Image Quality
Off
Staple/Punch
Layout/Edit
Shortcut 6
Advanced
Setup
10/10/2008
Status
3-4
10:10
Basic Operation
Original Preview
You can display a preview image of the scanned document on the panel.
NOTE: To view a preview of an image stored in a Custom Box, refer to Previewing Documents/Checking
Document Details on page 3-39.
The procedure for previewing scanned originals is explained below.
The procedure described here is for copying a single-page original.
Ready to copy.
Copies
Copy Image
1
Press the Copy key and place the original on the
platen.
2
Press [Preview].
3
The machine starts scanning the original. When
scanning is completed, the preview image appears
on the panel.
4
To change the quality or the layout, press [Cancel]
or the Stop key. Change the settings and press
[Preview] again to see a preview image with the
new settings.
Shortcut 1
Shortcut 2
Place original.
Shortcut 3
Auto
Original
Zoom
Paper
: --: 100%
: --Preview
Quick Setup
Paper
Selection
2-sided
>>2-sided
Duplex
Org./Paper/
Finishing
100%
Normal 0
Shortcut 4
Density
Zoom
Shortcut 5
2 in 1
Off
Combine
Color/
Image Quality
Staple/Punch
Layout/Edit
Shortcut 6
Advanced
Setup
10/10/2008
Status
Press Start key to start printing.
10:10
Copies
1
Press [Cancel] to change settings.
Copy Image
Shortcut 1
Shortcut 2
Shortcut 3
Auto
Original
Zoom
Paper
: Letter
: 100%
: Letter
Cancel
Quick Setup
Status
Paper
Selection
2-sided
>>2-sided
Duplex
Org./Paper/
Finishing
100%
Normal 0
Zoom
NOTE: If you scan a multi-page original, only the first
Shortcut 4
Density
page is previewed.
Shortcut 5
2 in 1
Combine
Color/
Image Quality
Off
Staple/Punch
Layout/Edit
Shortcut 6
Advanced
Setup
10/10/2008
10:10
5
3-5
If there is no problem with the preview image, press
the Start key. Copying begins.
3
Basic Operation
Selecting Color Mode
When you scan and then copy, send or store documents, you can select the color mode used for scanning from
the operation panel.
Automatically recognizes whether scanned
documents are color or black & white.
Scans all documents in full color.
Scans all documents in black & white.
The basic procedure for selecting the color mode is explained below, using an example in which the scanned
document is copied.
1
Press the Copy key.
2
Place the originals in the document processor or on
the platen.
3
Press the Auto Color key, Full Color key or Black
& White key to select the color mode.
4
Specify the required settings for copying.
5
Press the Start key.
NOTE: You can fine-tune the color mode from the
touch panel.
•
Copying:
You can use Single Color copying
in Cyan, Green, etc. (page 4-29).
•
Sending/Storing: You can select Auto Color (Color/
Gray), Auto Color (Color/B & W)
or Grayscale (page 5-21).
You can also change the default color mode for copying
and sending/storing. For details, refer to Color Selection
(Copy) on page 8-17 or Color Selection (Send/
Store) on page 8-18.
3-6
Basic Operation
Copying
Follow the steps as below for basic copying.
1
Press the Copy key when the Copy key/indicator
is off.
NOTE: If the touch panel is turned off, press the
Energy Saver key or the Power key and wait for the
machine to warm up.
2
Place the originals on the platen or in the optional
document processor.
NOTE: For loading instructions, refer to Loading
Originals on page 2-32.
Ready to copy.
3
Copies
Shortcut 1
Copy Image
Check that [Auto] is selected of Paper Selection on
the touch panel. Paper that matches the size of the
original will be selected automatically.
Shortcut 2
To change the paper size, press, [Org./Paper/
Finishing], [Paper Selection] and select the desired
paper source.
Place original.
Shortcut 3
Auto
Original
Zoom
Paper
: --: 100%
: --Preview
Quick Setup
Status
Paper
Selection
2-sided
>>2-sided
Duplex
Org./Paper/
Finishing
100%
Normal 0
Zoom
Shortcut 4
Density
Shortcut 5
2 in 1
Combine
Color/
Image Quality
Off
Staple/Punch
Layout/Edit
NOTE: Select paper size manually, if necessary,
Shortcut 6
instead of using automatic paper selection.
Advanced
Setup
10/10/2008
10:10
4
Use the numeric keys to enter the copy quantity.
Specify the desired number up to 999.
5
Press the Start key to start copying.
6
Remove the finished copies from the top tray.
3-7
3
Basic Operation
Adjusting Density
Use this procedure to adjust the density when copying.
Density Adjustment Option
Description
Manual
Adjust density using 7 or 13 levels.
Auto
Optimum density is selected according
to the density of the original.
NOTE: You may choose Auto mode as the default setting (refer to Density on page 8-19).
The procedure for adjusting the density of copies is explained below.
Copies
Ready to copy.
1
Press the Copy key.
2
Place the originals on the platen.
3
Set the original on the platen and press [Color/
Image Quality] -> [Density].
4
Adjust density manually pressing [-3] (Lighter) to
[+3] (Darker). You can change the density level [-3]
(Lighter) to [+3] (Darker) in half-steps.
Density
Auto
To change density adjustment from Manual to Auto,
press [Auto].
Place original.
Lighter
-3
Original
Zoom
Paper
: --: 100%
: ---
Darker
Normal
-2
-2.5
-1
-1.5
0
-0.5
+2
+1
+0.5
+1.5
+3
5
Press [OK].
6
Press the Start key. Copying begins.
+2.5
Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
3-8
Basic Operation
Selecting Image Quality
Select image quality suited to the type of original.
The table below shows the quality options.
Image Quality Option
Description
Text+Photo
For originals with both text and
photographs.
Text
For originals primarily consisting of text.
Photo
For photos taken with a camera.
Printed Photo
For photos printed in magazines, etc.
Map
For maps, etc.
Printed Document
For documents printed from this machine.
The procedure for selecting the quality of copies is explained below.
Ready to copy.
Copies
1
Original Image
1
Press the Copy key.
2
Place the originals on the platen.
3
Set the original on the platen and press [Color/
Image Quality] -> [Original Image].
4
Select the image quality.
5
Press [OK].
6
Press the Start key. Copying begins.
Select original image type for best results.
[Printed Document]: Suitable for documents printed from
this machine.
Place original.
Original
Zoom
Paper
Text+Photo
Photo
Printed Photo
Text
Map
Printed
Document
: --: 100%
: --Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
3-9
3
Basic Operation
Zoom Copying
Adjust the magnification to reduce or enlarge the original image. The following zoom options are available.
Auto Zoom
Ledger: 129 %
Automatically reduces or enlarges the original image
suitably to the selected paper size.
Letter-R
A4
A3: 141 %
Statement-R: 64 %
A5: 70 %
Manual Zoom
Manually reduces or enlarges the original image in 1%
increments between 25% and 400%.
25 %
400 %
Preset Zoom
Reduces or enlarges at preset magnifications.
The following magnifications are available.
Model
Zoom Level (Original Copy)
Inch Models
100%, Auto, 400% (Max.), 200% (STMT >>
Ledger), 154%(STMT >> Legal), 129% (Letter >>
Ledger), 121% (Legal >> Ledger), 78% (Legal >>
Letter), 77% (Ledger >> Legal), 64% (Ledger >>
Letter), 50% (Ledger >> STMT), 25% (Min.)
Metric Models
100%, Auto, 400% (Max.), 200% (A5 >> A3),
141% (A4 >> A3, A5 >> A4), 127% (Folio >>
A3), 106% (11×15" >> A3), 90% (Folio >> A4),
75% (11×15" >> A4),
70% (A3 >> A4, A4 >> A5), 50%, 25% (Min.)
Metric Models (Asia
Pacific)
100%, Auto, 400% (Max.), 200% (A5 >> A3),
141% (A4 >> A3, B5 >> B4), 122% (A4 >> B4,
A5 >> B5), 115% (B4 >> A3, B5 >> A4), 86%
(A3 >> B4, A4 >> B5), 81%(B4 >> A4, B5 >>
A5), 70% (A3 >> A4, B4 >> B5), 50%, 25%
(Min.)
3-10
Basic Operation
XY Zoom
Select vertical and horizontal magnifications
individually. Reduce or enlarge original images in 1%
increments between 25% and 400%.
Y
3
X
The procedure for using zoom copying is explained below.
Copies
Ready to copy.
1
Press the Copy key.
2
Place the originals on the platen.
3
Set the original on the platen and press [Layout/
Edit] -> [Zoom].
4
Press [Standard Zoom] to use Auto Zoom.
Press [+] or [–] to change the displayed
magnification as desired. You can also enter the
magnification directly using the numeric keys by
pressing [# Keys].
Zoom
(25 - 400)
Standard
Zoom
Place original.
Original
Zoom
Paper
XY Zoom
: --: 400%
: --Preview
400
400%
Max.
%
78%
200%
STMT
>>Ledger
154%
Legal
>>Letter
# Keys
77% Ledger
STMT
>>Legal
100%
64% Ledger
129%
Letter
>>Ledger
Auto
50%
121%
Legal
>>Ledger
Add Shortcut
>>Legal
When using Preset Zoom, select the key of desired
magnification.
>>Letter
Ledger
>>STMT
25% Min.
Cancel
When using XY Zoom, press [XY Zoom].
OK
Status
10/10/2008
10:10
Press [+] or [–] to change the displayed
magnifications of X (horizontal) and Y (vertical).
You can also enter the magnification directly using
the numeric keys by pressing [# Keys].
Press [Original Orientation] to select orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
Copies
Ready to copy.
Zoom
Standard
Zoom
Place original.
X
(25 - 400)
100
%
XY Zoom
# Keys
Y
Original
Zoom
Paper
: --: 100%
: --Preview
Add Shortcut
Status
(25 - 400)
100
# Keys
Cancel
%
Top Edge Top
Original
Orientation
OK
10/10/2008
10:10
5
Press [OK].
6
Press the Start key. Copying begins.
3-11
Basic Operation
Duplex Copying
Produce two-sided copies. The following duplex options are available.
You can also create single-sided copies from two-sided originals or originals with facing pages such as books.
The following modes are available.
One-sided to Two-sided
Produces two-sided copies from one-sided originals. In
case of an odd number of originals, the back side of the
last copy will be blank.
5
4
5
3
3
4
1
2
2
1
Original
Copy
A
ghi
def
ghi
abc
A Original Left/Right to Binding Left/Right: Images on
the second sides are not rotated.
abc
def
abc
The following binding options are available.
B
ghi
def
Original
B Original Left/Right to Binding Top: Images on the
second sides are rotated 180°. Copies can be bound
on the top edge, facing the same orientation when
turning the pages.
Copy
Two-sided to One-sided
1
Copies each side of a two-sided original onto two
individual sheets. The optional document processor is
required.
2
1
2
Original
Copy
The following binding options are available.
•
•
Binding Left/Right: Images on the second sides
are not rotated.
Binding Top: Images on the second sides are
rotated 180°.
Two-sided to Two-sided
5
5
3
3
Produces two-sided copies from two-sided originals.
The optional document processor is required.
4
4
1
1
2
2
Original
Copy
NOTE: The paper sizes supported in Two-sided to
Two-sided are Ledger, Legal, Letter, Letter-R,
Executive, Statement-R, Oficio II, 8.5×13.5", A3, B4,
A4, A4-R, B5, B5-R, A5-R and Folio.
3-12
Basic Operation
Book to One-sided
1
2
Produces a 1-sided copy of a 2-sided or open book
original.
2
1
The following binding options are available.
Original
•
Copy
•
Binding Left: Originals with facing pages are
copied from left to right.
Binding Right: Originals with facing pages are
copied from right to left.
NOTE: The following sizes of originals and paper are
supported in Two-sided to One-sided and Book to Onesided. Original: Ledger, Letter-R, A3, B4, A4-R, B5-R,
A5-R and 8K. Paper: Letter, A4, B5 and 16K. You may
change paper size and reduce or enlarge copy to
match that size.
Book to Two-sided
Facing pages
-> Facing pages
Facing pages
-> Two-sided
2
3
3
4
1
4
1
2
0
1
3
NOTE: The following sizes of originals and paper are
supported in Book to Two-sided mode. Original:
Ledger, Letter-R, A3, B4, A4-R, B5-R, A5-R and 8K.
Paper: Letter, A4 and B5.
2
1
4
3
3
2
4
2
1
3
1
0
2
Original
Produces two-sided copies from an open book original
with facing pages.
Copy
The procedure for using two-sided/duplex copying is explained below.
Copies
Ready to copy.
Duplex
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Duplex].
4
Select the desired Duplex option.
5
If you choose [1-sided>>2-sided] or
[2-sided>>2-sided], select the binding edge of the
finished copies of Finishing.
1-sided
>>1-sided
Place original.
1-sided
>>2-sided
2-sided
>>1-sided
2-sided
>>2-sided
Original
Zoom
Paper
: --: 100%
: --Preview
Add Shortcut
Status
Book
>>1-sided
Book
>>2-sided
If you choose [Book>>2-sided], press [Book>>2sided] or [Book>> Book] of Finishing to select the
setting for duplex.
Finishing
Top Edge Top
Binding
Left/Right
Binding
Top
Cancel
Original
Orientation
OK
10/10/2008
10:10
3-13
3
Basic Operation
Copies
Ready to copy.
6
If you choose [2-sided>>1-sided],
[2-sided>>2-sided], [Book>>1-sided] or
[Book>>2-sided], select the binding edge of the
originals of Original.
7
Press [Original Orientation] to select orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
8
Press [OK].
9
Press the Start key.
Duplex
Original
1-sided
>>1-sided
Place original.
1-sided
>>2-sided
Binding
Left/Right
2-sided
>>1-sided
Binding
Top
2-sided
>>2-sided
Original
Zoom
Paper
: --: 100%
: --Preview
Top Edge Top
Book
>>1-sided
Original
Orientation
Book
>>2-sided
Add Shortcut
Cancel
OK
10/10/2008
Status
10:10
Once an original placed on the platen is scanned,
replace it with the next one. Then, press the Start
key.
After scanning all originals, press [Finish Scan] to
start copying.
Collate/Offset Copying
The machine can collate and offset at the same time as it copies.
You can use the Collate/Offset copy function for tasks such as those shown below.
Collate
Scan multiple originals and deliver complete sets of
copies as required according to page number.
3
2
1
3
3
2
2
1
1
3
2
1
Original
Copy
Offset
Without Document Finisher
If the optional document finisher is not installed, when
you use offsetting, printed copies are produced after
rotating each set (or page) by 90º.
3
2
1
3
1
1
2
3
2
3
2
1
Original
NOTE: You need to load the same sized paper with
different orientation in the paper source other than the
selected paper source. The paper sizes supported in
Offset are A4, B5, Letter and 16K.
Copy (each set)
3-14
Basic Operation
With Document Finisher
3
2
1
3
2
1
3
2
1
When you use offsetting, printed copies are segregated
after each set of copies (or after each page).
3
2
1
NOTE: The optional document finisher or 3,000 sheet
document finisher is required.
3
Original
Copy (each set)
The procedure for using collate/offset copying is
explained below.
Ready to copy.
Copies
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Collate/
Offset].
4
To use collate copying, press [On] of Collate.
To use offset copying, press [Each Set] of Offset.
Collate/Offset
Collate
Place original.
Original
Zoom
Paper
: --: 100%
: ---
Off
On
Off
Each Set
Press [OK].
Offset
Preview
Add Shortcut
Cancel
OK
Status
10/10/2008
Ready to copy.
10:10
If [Off] is selected for Collate, press [Off] or [Each
Page] of Offset.
Copies
Collate/Offset
Collate
Place original.
Original
Zoom
Paper
: --: 100%
: ---
Off
On
Off
Each Page
5
Press [OK].
6
Press the Start key. Copying begins.
Offset
Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
3-15
Basic Operation
Reserve Next
This function allows you to reserve the next job during printing. Using this function, the original will be scanned
while the machine is printing. When the current print job ends, the reserved copy job is printed. The procedure
differs depending on the Reserve Next Priority (refer to page 8-28).
If Reserve Next Priority is set to [On]
The Copy function default screen appears on the touch panel during printing.
Ready to copy.
Copies
1
Place the originals onto the machine for reserving
copy, and configure the copy settings.
2
Press the Start key.
Shortcut 1
Copy Image
Shortcut 2
Place original.
Shortcut 3
Auto
Original
Zoom
Paper
100%
Paper
Selection
: --: 100%
: ---
2-sided
>>2-sided
Preview
Duplex
Quick Setup
Org./Paper/
Finishing
Normal 0
Zoom
Shortcut 4
Density
Shortcut 5
2 in 1
Combine
Color/
Image Quality
Off
Shortcut 6
Staple/Punch
Layout/Edit
Advanced
Setup
10/10/2008
Status
10:10
The machine starts scanning the originals.
When the current print job ends, the reserved copy
job is printed.
If Reserve Next Priority is set to [Off]
The Copying screen appears on the touch panel during printing.
Job No.:
000021
Job Name:
Scanner Setting
1
Copies
Copying...
Doc10102008101031
Press [Reserve Next].
The default screen for copying appears.
User Name: ----Printer Setting
Scanned Pages
Copies
2
2/ 24
Letter
Letter
100%
2-sided
2-sided
Collate
Plain
Top Edge Top
Top Tray
Cancel
Status
Reserve Next
10/10/2008
10:10
2
Place the originals onto the machine for reserving
copy, and configure the copy settings.
3
Press the Start key.
The machine starts scanning the originals.
When the current print job ends, the reserved copy
job is printed.
3-16
Basic Operation
Interrupt Copy
This function allows you to pause the current jobs in progress when you need to make copies immediately.
When interruption copy ends, the machine resumes the paused print jobs.
NOTE: If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically
cancelled and printing resumes. You can change the delay until interrupt copying is cancelled. Change the
delay as required. For more information, refer to Interrupt Clear Timer on page 8-59.
Ready for interrupt copy.
Copies
1
1
Ready for interrupt copy. is displayed.
Shortcut 1
Copy Image
Press the Interrupt key.
Shortcut 2
The current print job is temporarily interrupted.
Place original.
Shortcut 3
Auto
Original
Zoom
Paper
: --: 100%
: --Preview
Quick Setup
Status
Paper
Selection
2-sided
>>2-sided
Duplex
Org./Paper/
Finishing
100%
Normal 0
Zoom
Shortcut 4
Density
Shortcut 5
2 in 1
Combine
Color/
Image Quality
Off
Staple/Punch
Layout/Edit
Shortcut 6
Advanced
Setup
10/10/2008
10:10
2
Place the originals onto the machine for interrupt
copy, and configure the copy settings.
3
Press the Start key to start interrupt copying.
4
When interrupt copying ends, press the Interrupt
key.
The machine resumes the paused print jobs.
3-17
3
Basic Operation
Staple
Use this feature to staple your finished copies.
NOTE: Stapling requires the optional document finisher or 3,000 sheet document finisher. Note also that
saddle stitching (center stapling) requires the folding unit.
The following stapling options and orientations are available.
Original Orientation:
Top Edge (Back Edge)
Original Orientation:
Top Edge (Back Edge)
3,000 Sheet Document
Finisher
Cassette Paper Load
Direction
3,000 Sheet Document
Finisher
Cassette Paper Load
Direction
Document Finisher
Cassette Paper Load
Direction
Document Finisher
Cassette Paper Load
Direction
3-18
Original Orientation:
Original Orientation:
Left Top Edge (Left top Left Top Edge (Left top
corner)
corner)
Basic Operation
Use the procedure below to produce stapled copies.
Copies
Ready to copy.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Staple/
Punch].
4
Select the staple position.
Staple/Punch
Top
Left
2 staples
Top
Top
Right
2 staples
Right
2 staples
Left
Bind
and Fold
Punch
2 holes
Left
3 holes
Left
Off
2 holes
Top
3 holes
Top
2 holes
Right
3 holes
Right
Staple
Off
Place original.
Original
Zoom
Paper
: --: 100%
: --Preview
Add Shortcut
Status
Cancel
NOTE: To use saddle stitching, press [Bind and Fold].
When placing originals, be sure to place the cover
page at the bottom. For more information on saddle
stitching, refer to Booklet from Sheets on page 4-18.
Top Edge Top
Original
Orientation
5
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
6
Press [OK].
7
Press the Start key. Copying begins.
OK
10/10/2008
10:10
3-19
3
Basic Operation
Punch
Punch holes in sets of finished copies in preparation for binding.
NOTE: Requires the optional 3,000 sheet document finisher and punching unit.
The orientations of the original and corresponding punch positions are as follows.
Original
Copy
Orientation of Original
Platen
Document
processor
NOTE: The inch model provides two-hole and three-hole punching. The metric model provides two-hole and
four-hole punching.
Follow the steps as below for punching.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing]and then press
[Staple/Punch].
3-20
Basic Operation
Copies
Ready to copy.
Staple/Punch
Staple
: --: 100%
: --Preview
Add Shortcut
Status
Select the type of hole punching.
5
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
6
Press [OK].
2 staples
Top
Top
Right
2 staples
Right
2 staples
Left
Bind
and Fold
Punch
2 holes
Left
3 holes
Left
Off
2 holes
Top
3 holes
Top
2 holes
Right
3 holes
Right
Off
Place original.
Original
Zoom
Paper
Top
Left
4
Cancel
3
Top Edge Top
Original
Orientation
OK
10/10/2008
10:10
7
Press the Start key.
If the original is placed on the platen. Place the next
original and press the Start key. Copying begins.
If all original pages have been scanned, press
[Finish Scan]. Copying begins.
3-21
Basic Operation
Printing - Printing from Applications
Follow the steps below to print documents from applications.
NOTE: To print the document from applications, install the printer driver on your computer from the supplied
CD-ROM (Product Library).
1
Create a document using an application.
2
Click File and select Print in the application. The
Print dialog box appears.
3
Click the  button next to the Name field and select
this machine from the list.
4
Enter the desired print quantity in the Number of
copies box. Enter any number up to 999.
When there is more than one document, select
Collate to print out one by one in the sequence of
the page numbers.
5
3-22
Click Properties button. The Properties dialog
box appears.
Basic Operation
6
Select the Basic tab and click Page Size button to
select the paper size.
To print on the special paper such as thick paper or
transparency, click the Media Type menu and
select the media type.
3
7
Click Source and select the paper source.
NOTE: If you choose Auto Select, paper is supplied
automatically from the paper source loaded with paper
of optimum size and type. To print on special paper
such as envelope or thick paper, place it on the multi
purpose tray and select MP Tray.
8
Select paper orientation, either Portrait or
Landscape, to match the orientation of the
document.
Selecting Rotate 180° will print the document
rotated 180°.
9
Click OK button to return to the Print dialog box.
10 Click OK button to start printing.
3-23
Basic Operation
Sending
This machine can send a scanned image as an attachment to an E-mail message or to a PC linked to the
network. In order to do this, it is necessary to register the sender and destination (recipient) address on the
network.
A network environment which enables the machine to connect to a mail server is required. It is recommended
that a Local Area Network (LAN) be used to assist with transmission speed and security issues.
At the same time as you send a scanned image, you can also print the image or send it to the Document Box.
To use the Scanning Function perform the following steps:
•
Program the settings, including the E-mail setting on the machine.
•
Use COMMAND CENTER (the internal HTML web page) to register the IP address, the host name of the
SMTP server, and the recipient.
•
Register the destination in the Address Book or One Touch keys.
•
When the PC Folder (SMB/FTP) is selected, it is necessary to share the destination folder. For setting-up
the PC Folder, contact your administrator.
•
Creating/Registering a Document Box (when a Document Box is selected as the destination)
•
Detailed transmission settings (to select a Document Box as the destination or to print and send the image
at the same time)
Follow the steps below for basic sending. The following four options are available.
•
Send as E-mail: Sends a scanned original image as an E-mail attachment...page 3-25
•
Send to Folder (SMB): Stores a scanned original image in a shared folder of any PC...page 3-26
•
Send to Folder (FTP): Stores a scanned original image in a folder of an FTP server...page 3-26
•
Send to Document Box: Sends a document stored in a document box on this machine...page 6-6
•
Image Data Scanning with TWAIN / WIA: Loads the document data stored in a Custom Box to a PC...Refer
to the TWAIN/WIA Driver Operation Guide
NOTE: Different sending options can be specified in combination. Refer to Sending to Different Types of
Destinations (Multi Sending) on page 3-32.
3-24
Basic Operation
Send as E-mail
Sends a scanned original image as an E-mail attachment.
NOTE:
•
•
You must have a network environment in which this machine can connect to a mail server. It is
recommended that the machine be used in an environment in which it can connect to the mail server at any
time over a LAN.
Access the COMMAND CENTER beforehand and specify the settings required for sending e-mail. For
details, see COMMAND CENTER (Settings for E-mail) on page 2-17.
1
Press the Send key.
Displays the screen for sending.
NOTE: Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
Ready to send.
2
Destination
Place original.
Press [E-mail Addr Entry] and then [E-mail
Address].
E-mail Address Entry
E-mail
Address
NOTE: Destination can be specified using the
Address Book or the One Touch Keys. Refer to
Specifying Destination on page 3-30.
Add a new e-mail destination.
Press [E-mail Address], then enter
the address using the keyboard screen.
Add to Addr Book
Status
Next Dest.
Cancel
OK
08/08/2009
10:10
3
Enter destination E-mail address and press [OK].
4
Press [Next Dest.] and repeat steps 3 to specify the
destination. Up to 100 E-mail addresses can be
specified.
NOTE: When [Add to Addr Book] is displayed, the
destinations are registered in the Address Book.
5
3-25
Press [OK]. The destinations are registered in the
destination list.
3
Basic Operation
Ready to send.
6
Destination
Check the destination list.
Place original.
Destination
Detail
ABCD
TUVW
10.200.188.120
Group1
Group1
On Hook
Direct
1/1
E-mail
Addr Entry
Select a destination and press [Delete] to remove
the destination from the list.
Folder Path
Entry
Detail/Edit
Chain
Auto
Select a destination and press [Detail/Edit] to check
and edit it.
Address
Book
To:
abcd@efg.com
Delete
Recall
FAX No.
Entry
0001
AAA
0002
BBB
0006
FFF
0007
GGG
Destination
Status
0003
CCC
0004
0008
HHH
Quick Setup
0005
No.
i-FAX
Addr Entry
EEE
DDD
0009
III
Original/Sending
Data Format
0010
1/100
JJJ
Color/
Image Quality
NOTE: When selecting [On] for Entry Check for New
Destination (page 8-31), the confirmation screen
appears. Enter the same destination again and press
[OK].
WSD Scan
Advanced
Setup
08/08/2009
10:10
When selecting [On] for Destination Check before Send
(page 8-30), the confirmation screen appears after
pressing the Start key. For details, refer to Confirmation
Screen of Destinations on page 3-29.
Send to Folder (SMB)/Send to Folder (FTP)
Stores a scanned original image file in the specified shared folder of any PC.
Stores a scanned original image in a folder of an FTP server.
NOTE:
•
Refer to Help of your operating system for details on how to share a folder.
•
Be sure that SMB Protocol or FTP in the COMMAND CENTER is On. For details, refer to the KYOCERA
COMMAND CENTER Operation Guide.
1
Press the Send key.
Displays the screen for sending.
NOTE: Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
2
Press [Folder Path Entry] and then [SMB] or [FTP].
NOTE: Destination can be specified using the
Address Book or the One Touch Keys. For details, refer
to Specifying Destination on page 3-30.
3-26
Basic Operation
Ready to send.
3
Destination
Place original.
Folder Path Entry
SMB
Enter host name, path, login user name and login
password. Press the key of each item to first
display the entry screen.
Host Name
Path
FTP
Login
User Name
Login
Password
Specify the folder on the destination
computer.
Add to Addr Book
3
Connection
Test
Next Dest.
Cancel
OK
08/08/2009
Status
10:10
4
Enter the destination data and press [OK].
Use the keyboard to enter.
Limit: 128 characters
Input: 0 characters
Backspace
!
@
Q
#
W
A
E
S
Z
Upper-case
$
%
R
D
X
T
F
C
Lower-case
Lower-case
^
Y
G
V
&
U
H
B
*
(
I
J
N
O
K
M
No./Symbol
)
_
P
L
<
{
:
>
+
˜
}
|
"
?
Space
Cancel
OK
10/10/2008
Status
10:10
Data to be entered are as follows.
NOTE: You will be unable to send the data if you forget your login user name or login password. Contact your
administrator and check your login user name or login password.
For send to folder (SMB)
Item
Data to be entered
Max.
characters
Host Name*
Host name or IP address of the PC to receive the data.
Up to 70
characters
Path
Path to the receiving folder such as follows.
For example, \User\ScanData.
Up to 128
characters
Login User Name
User name to access the PC
For example, abcdnet\james.smith
Up to 64
characters
Login Password
Password to access the PC
Up to 64
characters
*
To specify a port number different from the default (139), enter using the format “host name:
port number” (e.g., SMBhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
3-27
Basic Operation
For send to folder (FTP)
Item
Data to be entered
Max.
characters
Host Name*
Host name or IP address of FTP server
Up to 70
characters
Path
Path to the receiving folder.
For example, \User\ScanData.
Otherwise the data will be saved in the home directory.
Up to 128
characters
Login User Name
FTP server login user name
Up to 64
characters
Login Password
FTP server login password
Up to 64
characters
*
To specify a port number different from the default (21), enter using the format “host name:
port number” (e.g., FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
Ready to send.
5
Destination
Place original.
Upon completion of all entries, press [Connection
Test] to check the connection.
Folder Path Entry
SMB
FTP
Host Name
NOTE: Connected. appears when connection to the
destination is correctly established. If Cannot connect.
appears, review the entry.
Path
Login
User Name
Login
Password
Specify the folder on the destination
computer.
Add to Addr Book
Status
Next Dest.
To specify another destination, go to the step 6. To
specify only one destination, go to step 7.
Connection
Test
Cancel
OK
08/08/2009
10:10
6
Press [Next Dest.] and repeat steps 3 to 5 to
specify the destination. You can specify a
combined total of up to 10 FTP and SMB
destination folders.
NOTE: When [Add to Addr Book] is displayed, the
entry is registered in the Address Book.
7
3-28
Press [OK] to register the entry in the destination
list.
Basic Operation
Ready to send.
8
Destination
Check the destination list.
Place original.
Destination
Detail
ABCD
TUVW
10.200.188.120
Group1
Group1
On Hook
Direct
Auto
1/1
E-mail
Addr Entry
Folder Path
Entry
Detail/Edit
Chain
Select a destination and press [Detail/Edit] to check
and edit it. Edit it, if necessary, referring to steps 3
to 5.
Address
Book
To:
abcd@efg.com
Delete
Recall
Select a destination and press [Delete] to remove
the destination from the list.
FAX No.
Entry
0001
AAA
0002
BBB
0006
FFF
0003
CCC
0007
GGG
Destination
0004
0008
Quick Setup
No.
i-FAX
Addr Entry
EEE
DDD
HHH
0005
0009
III
0010
1/100
JJJ
Original/Sending
Data Format
Color/
Image Quality
WSD Scan
08/08/2009
Status
NOTE: When On is selected in FTP Encrypted TX
(page 5-31), keys appear for selecting the encryption
method for the FTP transmission destination. Select
Auto, DES, 3DES or AES as the encryption method.
Advanced
Setup
10:10
When selecting [On] for Entry Check for New
Destination (page 8-31), the confirmation screen
appears. Enter the same host name and path again,
and press [OK].
When selecting [On] for Destination Check before Send
(page 8-30), the confirmation screen appears after
pressing the Start key. For details, refer to Confirmation
Screen of Destinations on page 3-29.
Confirmation Screen of Destinations
When selecting [On] for Destination Check before Send (page 8-30), the confirmation screen of destinations
appears after pressing the Start key.
Follow the steps below to confirm the destinations.
Ready to send.
1
Destination
Press [
] or [
] to confirm every destination.
Place original.
Destination
A OFFICE
Press [Detail] to display the detailed information on
the selected destination.
Detail
1234567890
To delete the destination, select the destination you
want to delete and press [Delete]. Press [Yes] in the
confirmation screen. The destination is deleted.
Detail
Delete
To add the destination, press [Cancel] and then
return to the destination screen.
Check
Cancel
Status
08/08/2009
10:10
2
Press [Check].
NOTE: Be sure to confirm every destination by
displaying them on the touch panel. You cannot press
[Check] unless you have confirmed every destination.
3
3-29
Press the Start key to start sending.
3
Basic Operation
Specifying Destination
When specifying destination, choose from the Address Book or use the One Touch Keys.
NOTE: You can set the machine up so that the address book screen appears when you press the Send key.
For details, refer to Setting the Default Send Screen on page 8-32.
Choosing from the Address Book
Select a destination registered in the Address Book.
Ready to send.
1
In the basic screen for sending, press [Address
Book].
2
Detail
Press the checkbox to select the desired
destination from the list. You may choose multiple
destinations. The selected destinations are
indicated by a checkmark in the check box. To use
an address book on the LDAP server, select [Ext
Address Book] from the Addr Book pull-down
menu.
OK
You can change the order in which the destinations
are listed by selecting [Name] or [No.] from the Sort
pull-down menu.
Destination
Place original.
Destination
Detail
ABCD
abcd@efg.com
To:
TUVW
10.200.188.120
Auto
Address
Book
1/1
Group1
Group1
On Hook
Direct
Folder Path
Entry
Detail/Edit
Chain
E-mail
Addr Entry
Delete
Recall
FAX No.
Entry
0001
0002
AAA
BBB
0006
0003
CCC
0007
FFF
0004
GGG
0008
0009
i-FAX
Addr Entry
0010
III
Quick Setup
No.
EEE
DDD
HHH
Destination
0005
1/100
JJJ
Original/Sending
Data Format
Color/
Image Quality
WSD Scan
Advanced
Setup
08/08/2009
Status
10:10
Address Book
Addr Book
Dest.
No.
Sort
Address Book
Type
Name
Name
Detail
0001
ABCD
abcd@efg.com
0002
TUVW
tuvw@xyz.com
0003
Group1
0004
Group2
Search(Name)
Search(No.)
0005
ABC
DEF
E-mail
1/2
Register/Edit
Address Book
Group3
GHI
JKL
MNO
Folder
PQRS
TUV
FAX
WXYZ
0-9
Group
i-FAX
Cancel
Status
08/08/2009
10:10
NOTE: To cancel the selection, press the check box
and remove the checkmark. For details on the external
address book, refer to KYOCERA COMMAND
CENTER Operation Guide.
3
Press [OK] to register the selected destination in
the destination list.
NOTE: To delete a destination in the list, select the
destination and press [Delete].
3-30
Basic Operation
Destination Search
Destinations registered in the Address Book can be searched.
Advanced search by type or by initial letter is also available.
Address Book
Addr Book
Dest.
(1)
(2)
No.
Name
Name
Detail
0001
ABCD
abcd@efg.com
0002
TUVW
tuvw@xyz.com
0003
Group1
0004
Group2
Search(Name)
Search(No.)
0005
(3)
Sort
Address Book
Type
ABC
(4)
DEF
1/2
Register/Edit
Address Book
Detail
Group3
GHI
E-mail
JKL
MNO
Folder
PQRS
TUV
WXYZ
FAX
0-9
Group
i-FAX
Cancel
Keys
used
OK
08/08/2009
Status
Search type
10:10
Subjects searched
1
Search by name
Search by registered name.
2
Search by address
number
Search by registered address number.
3
Advanced search
by initial letter
Advanced search by initial letter of registered name.
4
Advanced search
by destination
Advanced search by type of registered destination
(E-mail, Folder (SMB/FTP), FAX, i-FAX or Group).
(FAX: Only when the optional fax kit is installed.i-FAX:
Only when the optional internet fax kit is installed).
You can set this function up so that destination types
are selected when the address book is displayed.
For more information, refer to Narrow Down
Settings on page 8-66.
The procedures for using the different search modes are explained below.
Search by name
Press [Search(Name)] and enter the required name.
Search by address number
Press [Search(No.)] and enter the address number you wish to search.
Advanced search by initial letter
Press the key for the required initial letter.
Advanced search by destination
Press any of [E-mail], [Folder], [FAX], [i-FAX] or [Group]. The destinations registered by that type are displayed.
3-31
3
Basic Operation
Choosing by One Touch Key
Ready to send.
Select the destination using the One Touch Keys.
Destination
Place original.
Destination
Detail
ABCD
abcd@efg.com
To:
TUVW
10.200.188.120
Auto
Group1
Group1
On Hook
Direct
1/1
E-mail
Addr Entry
Folder Path
Entry
Detail/Edit
Chain
Address
Book
Delete
Recall
FAX No.
Entry
0001
0002
AAA
BBB
0006
0003
CCC
0007
FFF
GGG
0009
III
Quick Setup
0005
No.
0010
1/100
i-FAX
Addr Entry
EEE
DDD
0008
HHH
Destination
0004
JJJ
Original/Sending
Data Format
Color/
Image Quality
WSD Scan
Advanced
Setup
08/08/2009
Status
10:10
In the basic screen for sending, press the One Touch
Keys where the destination is registered.
NOTE: If the One Touch Keys for the desired
destination is hidden on the touch panel, press [ ] or
[ ] to scroll and view next or previous One Touch
Keys.
This procedure assumes that One Touch Keys have
already been registered.
Refer to Adding a Destination on One Touch Key on
page 8-64 for more information on adding One Touch
keys.
Choosing by Speed Dial
Ready to send.
Access the destination by specifying the 4-digit (0001 to
1000) One Touch Key number (speed dial).
Destination
Place original.
Destination
Detail
ABCD
TUVW
Auto
10.200.188.120
1/1
Group1
Group1
On Hook
Address
Book
To:
abcd@efg.com
Direct
Folder Path
Entry
Detail/Edit
Chain
E-mail
Addr Entry
Delete
Recall
FAX No.
Entry
0001
AAA
0002
BBB
0006
FFF
Destination
Status
0003
CCC
0007
GGG
0004
HHH
Quick Setup
No.
0010
1/100
i-FAX
Addr Entry
EEE
DDD
0008
0005
0009
III
Original/Sending
Data Format
In the basic screen for sending, press the Quick No.
Search key or [No.] and use the numeric keys to enter
the One Touch key number in the numeric entry
screen.
JJJ
Color/
Image Quality
NOTE: if you entered the speed dial in 1 to 3-digit,
WSD Scan
press [OK].
Advanced
Setup
08/08/2009
10:10
Sending to Different Types of Destinations (Multi Sending)
You can specify destinations that combine e-mail addresses, folders (SMB or FTP) and fax numbers (optional).
This is referred to as Multi Sending. This is useful for sending to different types of destination (e-mail addresses,
folders, etc.) in a single operation.
No. of broadcast items E-mail
Folders (SMP, FTP)
FAX
i-FAX
: Up to 100
: Total of 10 SMB and FTP
: Up to 500
: Up to 100
Also, depending on the settings, you can send and print at the same time.
Procedures are the same as used in specifying the destinations of respective types. Continue to enter E-mail
address or folder path so that they appear in the destination list. Press the Start key to launch transmission to
all destinations at one time.
3-32
Basic Operation
Using Document Box
What is Document Box?
Document Box is an area in the hard disk in which you can save documents for later retrieval or sharing among
multiple users.
Document Box contains four types of component boxes which provide the following functions.
Custom Box...page 6-2
Custom Box is a component box which you can create within the Document Box and store data for later retrieval.
You can create or delete a Custom Box, and manipulate data in various ways as described below:
•
Creating a box...page 6-2
•
Storing Documents in a Custom Box...page 6-4
•
Printing a Document in a Custom Box...page 6-5
•
Sending a Document from a Custom Box...page 6-6
•
Moving/ Copying /Joining Documents in a Custom Box...page 6-8
•
Deleting Documents in a Custom Box...page 6-11
Job Box
Job Box holds temporary or permanent print data for use with job options including Private Print, Stored Job,
Quick Copy, Proof and Hold, Repeat copy and Form Overlay which will be discussed later.
Four individual Job Boxes corresponding to these job options are already provided in the Document Box.
These Job Boxes cannot be created or deleted by a user.
NOTE: You can set up the machine so that temporary documents in job boxes are automatically deleted. For
details, refer to Automatic Delete Setting for Temporary Documents on page 6-17.
Private Print/Stored Job Box...page 6-12
In Private Printing, you can specify that a job is not printed until you release the job at the operation panel. When
sending the job from the application software, specify a 4-digit access code in the printer driver.
The job is released for printing by entering the access code on the operation panel, ensuring confidentiality of
the print job.
The data will be deleted upon completion of print job or after the main power switch is turned off.
In Hold Job, access codes are not mandatory, but can be set on the printer driver if printing with PIN security is
required. In this event, you need to enter the access code to print the stored jobs. Print data will be stored in the
hard disk after printing. This will allow printing of the same print data repeatedly.
Quick Copy/Proof and Hold Box...page 6-13
Quick Copy feature facilitates additional prints of a document already printed.
Activating Quick Copy and printing a document using the printer driver allow the print data to be stored in the
Quick Copy Job Box.
3-33
3
Basic Operation
When additional copies are required, you can reprint the required number of copies from the operation panel.
By default, up to 32 documents can be stored.
When power is turned off, all stored jobs will be deleted.
NOTE: When you attempt to store documents in excess of the above maximum, the oldest document data will
be overwritten by the latest document data.
The Proof and Hold feature produces only a single proof print of multiple-print job and holds printing of the
remaining copies.
Printing a multiple-print job in Proof and Hold using the printer driver allows only a single copy to be printed while
maintaining the document data in the Job Box.
To continue to print the remaining copies, use the operation panel.
You can change the number of copies to print.
Repeat Copy Box...page 6-15
Repeat Copy feature stores the copied original document data in the Job Box and allows you to print additional
copies later.
By default, up to 32 documents can be stored.
When power is turned off, the original data will be deleted.
NOTE: Repeat Copy function is not available when the optional Data Security Kit is installed.
Form for Form Overlay Box...page 6-17
Image Overlay feature copies the original document overlaid with a form or image.
This Job Box is used to store the forms or images for overlaying.
Removable Memory Box
A USB memory inserted into the USB memory slot (A1) of the machine is also recognizable as a Job Box. This
allows printing of the PDF data stored in the USB memory.
You can print PDF data directly from the USB memory without a PC.
Image files scanned using this machine can also be saved to USB memory in the PDF, TIFF, JPEG, XPS or
high compression PDF format (Scan to USB).
Fax Box
Fax Box stores the fax data received. For details, refer to the Operation Guide supplied with the fax kit.
3-34
Basic Operation
Basic Operation for Document Box
This section explains basic operations for document boxes, using examples where tasks are carried out with
custom boxes.
NOTE: In the following explanation, it is assumed that user login administration is enabled. For details on User
Logon privileges, refer to User Privileges on page 3-40.
3
The basic procedure for using document boxes is explained below.
1
Press the Document Box key.
The default document box screen appears.
2
Custom Box.
No.
0001
Name
Owner
SALES
Used Area
Anonymous
----
Search(Name)
In this example, press [Custom Box].
Search(No.)
1/1
Store File
Custom Box
Job Box
Detail
Removable Memory
Press [Custom Box], [Job Box] or [Removable
Memory] to select the type of document box you
want to work with.
Register/Edit
Box
The box list screen appears.
You can use this screen for tasks such as
registering and editing boxes. For more information
on using the box list, refer to Custom Box List on
page 3-36.
Open
FAX Box
Status
08/08/2009
10:10
NOTE: For more information on registering boxes,
refer to Creating a New Custom Box on page 6-2.
You cannot access boxes if you forget your password.
In this event, access the machine using administrator
privileges and overwrite your box password.
3
Custom Box.
No.
Name
Owner
Used Area
0001
0001 Box
1 User
10%
Search(Name)
0002
0002 Box
2 User
20%
Search(No.)
0003
0003 Box
3 User
30%
1/1
Store File
Custom Box
Status
Job Box
Select the box containing the document you want
to work with and press [Open].
Detail
Removable Memory
The document list screen appears.
You can use this screen for tasks such as printing
and sending documents. For more information on
using the document list, refer to Document List on
page 3-37.
Register/Edit
Box
Open
FAX Box
08/08/2009
10:10
NOTE: If a custom box is protected by a password,
enter the correct password.
3-35
Basic Operation
Custom Box List
The box list shows the registered custom boxes. The custom boxes can be listed by box number or by box name.
You can manipulate the list in a range of ways, as shown below.
Listing the boxes by number in ascending/
descending order.
Listing the boxes by name in
alphabetical order.
Custom Box.
No.
Name
Owner
Used Area
0001
0001 Box
1 User
10%
0002
0002 Box
2 User
20%
0003
0003 Box
3 User
30%
Search(Name)
Search(No.)
1/1
Store File
Custom Box
Job Box
Detail
Removable Memory
Status
Opens the selected box.
Open
FAX Box
08/08/2009
Saves the document in the
selected box.
3-36
Registers new boxes and
checks, modifies or
deletes box information.
Register/Edit
Box
10:10
Displays the details for
the selected box.
Basic Operation
Document List
The document list is a list of the documents stored in the custom box. Documents can be listed either by name
or as thumbnails. The list can be used as shown below.
List
Listing the documents by name
in alphabetical order.
Selecting more than one
document at a time.
Listing the documents by time of update in
ascending/descending order.
Box:
File Name
Selecting documents by
checking checkboxes.
Listing the documents by size in
ascending/descending order.
Date and Time
Size
0001
0404200710574501
10/10/2008 09:40
21 MB
0002
0404200710574511
10/10/2008 09:50
21 MB
0003
0404200710574521
10/10/2008 10:00
21 MB
Search(Name)
Highlighting a document to
display its details with [Detail].
1/1
Detail
Previews the selected
document.
Preview
Print
Send
Join
Move/Copy
Delete
Store File
Close
08/08/2009
Status
10:10
Thumbnail
Selecting more than one
document at a time.
Switches between list display
and thumbnail display.
Box:
SALES
Search(Name)
Highlighting a document
to display its details with
[Detail].
040420075501
Prints, sends, joins, moves,
copies or deletes the
selected documents.
040420075502
1/1
Detail
Preview
Selecting documents by
checking checkboxes.
Print
Send
Join
Move/Copy
Delete
Store File
Saves the document in the
open box.
Close
Status
08/08/2009
10:10
NOTE: You can select multiple documents by pressing the respective document checkboxes. However, note
that you cannot select multiple documents when you are sending documents.
3-37
3
Basic Operation
Viewing/Editing Box Details
You can check and modify box information.
Use the procedure below.
Document Box/Removable Memory - Register/Edit Box
No.
Name
0001
SALES
Owner
1
Press [Register/Edit Box] in the box list screen.
2
Highlight the box whose details you wish to check
or edit and press [Detail/Edit].
Used Area
Anonymous
----
NOTE: If a custom box is protected by a password,
1/1
Detail/Edit
enter the correct password.
Add
Delete
Close
10/10/2008
Status
10:10
3
Box:
Box No.:
Change
To edit details, press [Change] of the detail you
wish to edit. Edit the detail as desired and press
[OK].
0001
Box Name:
Change
SALES
Box Password:
Usage Restriction:
21
Check the box details.
Change
MB
Change
********
Auto File Deletion:
30
day(s)
Free Space:
30
GB
Change
Overwrite Setting:
Delete after Printed:
Change
Off
Cancel
Status
Change
Permit
Register
08/08/2009
10:10
4
If you have changed the details, press [Register]
and then press [Yes] in the confirmation screen.
If you did not change the details, press [No].
5
3-38
Press [Close]. The display returns to the default
Document Box screen.
Basic Operation
Previewing Documents/Checking Document Details
You can use this function to preview the documents stored in a document box or display the document details
for checking.
Use the procedure below.
1
Select (highlight) a document to preview and then
press [Preview] or [Detail].
2
Preview the document or check the document
details.
The operations available in the preview screen are
shown below.
When you have zoomed in, you can use these keys to move
the displayed area.
Preview:
2007040410574501
No.
Size
:
Resol.
:
Color
:
1/6
In multiple-page documents,
you can change pages by
entering the desired page
number.
In multiple-page documents,
you can use these buttons to
change pages.
Close
08/08/2009
Status
Zoom out.
3
3-39
10:10
Zoom in.
When you have finished previewing documents or
checking document details, press [Close].
3
Basic Operation
User Privileges
When user login administration is enabled, accessibility to the Document Box components will vary depending
on the given user privilege.
Accessibilities vary depending on user privilege as follows:
Access level
Administrator
User
Creating a box
Yes
No
Changing box owner
Yes
No
Others
Yes
No
Owner
Yes
Yes
Changing box
number
Others
Yes
No
Owner
Yes
No
Renaming a box
Others
Yes
No
Owner
Yes
Yes
Changing the
password to a box
Others
No
No
Owner
Yes
Yes
Overwriting the
password to a box
Others
Yes
No
Owner
Yes
No
Adjusting the box
capacity
Others
Yes
No
Owner
Yes
No
Changing the owner
Others
Yes
No
Owner
Yes
No
Changing the
permission
Others
Yes
No
Owner
Yes
Yes
Changing the
period of using a
box
Others
Yes
No
Owner
Yes
Yes
Accessibility
Operation
Deleting a box
Box information
Restricting the Accessibility to a Box
The accessibility to a Custom Box differs depending on the level of privileges as follows:
Administrator: An administrator can gain access and manipulate all boxes.
User:
A user can gain access and manipulate his/her own boxes and the shared boxes.
3-40
Basic Operation
Password Entry Requirement
When user login administration is enabled, requirement of a password differs depending on the level of
privileges as follows:
Administrator:
The administrator is not required to enter a password to gain access
to any box.
The user is required to enter a password to gain access to a box
which is protected by a password. The user is not required to enter a
password to gain access to his/her own boxes.
User:
Creating new Custom Boxes when user login administration is enabled
If you create a new Custom Box when user login
administration is enabled, the screen appears and you
can change the owner and permission settings. Only
administrators and machine administrators can create
new Custom Boxes.
Box: **
Box No.:
Change
0001
Change
Box Password:
Change
**********
Auto File Deletion:
Usage Restriction:
21
SALES
Change
GB
Permission:
Change
Private
Change
day(s)
Overwrite Setting:
Changing the owner:
Change
Permit
Free Space:
30
Change
DCBA9876
Box Name:
30
Owner:
Delete after Printed:
Change
Off
GB
Cancel
Status
Register
08/08/2009
10:10
Press [Change] of Owner and
select the new owner for the
box from the displayed list.
Then press [OK].
Changing the permission:Press [Change] of
Permission and select either
[Private] or [Shared]. Then
press [OK].
NOTE: For information on specifying other settings,
refer to Creating a New Custom Box on page 6-2.
Working With User Privileges When User Login Administration is Enabled
When user login administration is enabled, the owner of
a box with user privileges set can change the following
box information: the box name, the box password, the
permission, the auto file deletion and the overwrite
setting.
Box:
Box No.:
Owner:
0001
DCBA9876
Box Name:
Change
Usage Restriction:
Change
Permission:
21 MB
SALES
Box Password:
Auto File Deletion:
30 day(s)
Free Space:
30
GB
Change
Private
********
Change
Overwrite Setting:
Delete after Printed:
Change
Off
Cancel
Status
Change
Permit
Register
08/08/2009
10:10
3-41
3
Basic Operation
Canceling Jobs
Follow the steps below to cancel any print or send job being executed.
Canceling Jobs
You can also cancel jobs by pressing the Stop key.
Printing jobs
1
Press the Stop key.
Cancelling job screen appears.
The current print job is temporarily interrupted.
2
Select the job you wish to cancel and press
[Cancel]. And then press [Yes] in the confirmation
screen.
1
Press the Stop key.
Sending jobs
Job Cancel appears.
NOTE: Pressing the Stop key will not temporarily stop
a job that you have already started sending.
2
Job No.:
000021
Job Name:
Scanner Setting
NOTE:
Copies
Copying...
Doc10102008101031
If Reserve Next Priority (refer to page 8-28) is set to
[Off]
User Name: ----Printer Setting
Scanned Pages
Copies
2
To cancel printing, select [Cancel], and then press
[Yes] in the confirmation screen.
2/ 24
Letter
Letter
100%
2-sided
2-sided
Collate
The Copying screen appears in the touch panel during
printing.
Plain
1
Top Edge Top
Press the Stop key or [Cancel].
Top Tray
Cancel
Status
The current print job is cancelled.
Reserve Next
10/10/2008
10:10
3-42
Basic Operation
Quick Setup Screen
In the initial screen for copying and sending (the screen which appears immediately after the Copy or Send key
is first pressed after power-on), important and generally often used functions are registered from among the
versatile functions of this machine. This initial screen is called Quick Setup Screen. Registration of functions in
the Quick Setup Screen can be adjusted to suit your work environment for better efficiency.
Functions Available for Registration in the Quick Setup Screen
Default registrations and the functions available for registration are as follows.
Function
Functions Available for
Registration
Default Registration
Copying
1:
2:
3:
4:
5:
6:
Paper Selection
Zoom
Density
Duplex
Combine
Staple/Punch
•
•
•
•
•
•
•
•
•
•
•
•
Paper Selection
Zoom
Density
Duplex
Combine
Staple/Punch
Original Orientation
Collate/Offset
Color Selection
Original Image
Original Size
Continuous Scan
Sending
1:
2:
3:
4:
5:
6:
Zoom
Scan Resolution
FAX TX Resolution
Density
2-sided/Book Original
File Format
•
•
•
•
•
•
•
•
•
•
•
•
Zoom
Scan Resolution
FAX TX Resolution
Density
2-sided/Book Original
File Format
Original Size
Sending Size
Original Orientation
Original Image
Color Selection
Continuous Scan
3-43
3
Basic Operation
Function
Document
Box
Functions Available for
Registration
Default Registration
Document
Storage
1: Color Selection
2: Resolution
3: Density
4: 2-sided/Book Original
5: Original Orientation
6: Original Image
•
•
•
•
•
•
•
•
•
•
Color Selection
Resolution
Density
2-sided/Book Original
Original Orientation
Original Image
Original Size
Zoom
Continuous Scan
Storing Size
Sending
From Box
1: File Format
2: Delete after Transmitted
3: FAX TX Resolution
4: Sending Size
•
•
•
•
File Format
Delete after Transmitted
FAX TX Resolution
Sending Size
Printing
From Box
1: Paper Selection
2: Delete after Printed
3: Collate/Offset
4: Duplex
5: Staple/Punch
6: Combine
•
•
•
•
•
•
Paper Selection
Delete after Printed
Collate/Offset
Duplex
Staple/Punch
Combine
Changing Registration
Ready to copy.
The following procedure is one example for replacing
the registration of Density with Original Image in the
Quick Setup Screen for copying.
Copies
Shortcut 1
Copy Image
Shortcut 2
Place original.
Shortcut 3
Auto
Original
Zoom
Paper
: --: 100%
: --Preview
Quick Setup
Status
Paper
Selection
2-sided
>>2-sided
Duplex
Org./Paper/
Finishing
100%
Normal 0
Zoom
Shortcut 4
Density
Shortcut 5
2 in 1
Combine
Color/
Image Quality
Off
Staple/Punch
Layout/Edit
Shortcut 6
Advanced
Setup
10/10/2008
10:10
1
Press the System Menu key.
2
Press [Copy], [Next] of Quick Setup Registration,
and then [Change] of Original Image.
3-44
Basic Operation
Copy - Original Image
3
Press [Key 3] here as the key to set replacement
location.
4
Press [OK]. A confirmation screen appears. Press
[Yes]. The Original Image Quality function will be
newly registered.
Register Original Image function on the Quick Setup screen.
Off
Key 1
Key 2
Key 3
Key 4
Key 5
Key 6
3
Cancel
Status
OK
10/10/2008
10:10
3-45
Basic Operation
Program (Copying and Sending)
By registering sets of frequently used functions as a single program, you can simply press the program number
as needed to recall those functions. You can also name the programs for easy identification when recalling.
NOTE: Sending operation can be registered in the program as well. Up to 50 functions combining copying and
sending can be registered in the program.
If user login administration is enabled, you can only register functions by logging in with administrator privileges.
Registering Programs
Use the procedure below to register a program.
The following procedure is an example of registering the copying function.
1
Press the Program key while the copy mode is
accessed.
2
Press [Register] and press a number (01 to 50) for
the program number.
If entering Program screen from the Copy screen or
Send screen, go to step 4.
NOTE: If you select a program number already
registered, the currently registered functions can be
replaced with a new set of functions.
3
Check that [Copy] is selected, and press [Next].
4
Enter the new program name and press [Register]
to register the program.
Recalling Programs
Use the procedure below to recall a registered program.
Program recalling.
01 FAX 1
06
02 FAX 2
07
03
08
04
09
05
10
Recall
Status
Register
1
Press the Program key.
2
Press [Recall] and press the key corresponding to
the program number (01 to 50) to recall. Press the
Quick No. Search key or [No.] to enter the
program number directly for recalling.
No.
NOTE: If the program cannot be recalled, the
Document Box or the form overlay specified in the
program might have been deleted. Check the
Document Box.
Edit
10/10/2008
10:10
3
3-46
Place the originals and press the Start key.
Copying is performed according to the registered
program.
Basic Operation
Editing and Deleting Programs
You can change program number and program name, or delete program.
Use the procedure below to edit or delete a program.
1
Press the Program key.
2
Press [Edit] and press the key(s) corresponding to
the program number (01 to 50) to change or delete.
3
To edit a program, use the procedure for registering
a program and press [Change]. Then change the
program number and program name and press
[Register]. Choose [Yes] in the confirmation screen
to change the program.
To delete the program, press [Delete this Program].
Choose [Yes] in the confirmation screen to finally
delete the program.
3-47
3
Basic Operation
Registering Shortcuts (Copy, Send, and Document Box Settings)
Add shortcuts in the Quick Setup screen for easy access to the frequently used functions. A function name linked
to a registered shortcut can be changed as necessary. You can register up to 6 shortcuts for copying functions,
sending functions, and functions set for document box.
Adding Shortcuts
Shortcut registration is performed in the setup screen of each function. Shortcuts can be registered for all
functions in which [Add Shortcut] appears on the screen.
Use the procedure below to register a shortcut.
Copies
Ready to copy.
1
After making the desired settings in the setup
screen of each function, press [Add Shortcut].
2
Press the keys corresponding to the shortcut
number (01 to 06) to register.
Memo Page
Layout
Off
Place original.
Layout A
Top
L to R
Top
R to L
None
Layout B
Border Line
Original
Zoom
Paper
: --: 100%
: ---
Top Edge Top
Top
L to B
Top
R to B
Preview
Add Shortcut
Cancel
Status
Original
Orientation
OK
10/10/2008
10:10
NOTE: If you select a shortcut number already
registered, the currently registered shortcut can be
replaced with a new one.
3
Enter the shortcut name and press [Register] to
add the shortcut.
Editing and Deleting Shortcuts
Follow the steps as below to change shortcut number/name or delete shortcut.
1
In the setup screen of each function, press [Add
Shortcut] in the bottom of the screen.
2
Press [Edit] and press the keys corresponding to
the shortcut number (01 to 06) to change or delete.
3
To edit a shortcut, press [Change] to change the
shortcut button number and name and press [OK]
and then [Register]. Choose [Yes] in the
confirmation screen to change the shortcut.
To delete the shortcut, press [Delete this Shortcut].
Choose [Yes] in the confirmation screen to delete
the shortcut.
3-48
Basic Operation
Using the Internet Browser
This section explains how to use the Internet browser.
NOTE: To use the internet browser, internet browser must be set to [On] in Internet Browser Setting on page
8-67.
3
Launching and Exiting the Browser
Use the procedure below to launch and exit the Internet browser.
1
Press the Application key.
The application list screen appears.
2
Application
Press [Internet Browser].
The Internet browser starts up.
Internet Browser
Status
10/10/2008
10:10
3
Use the browser screen to browse web pages.
For information on how to use the browser screen,
refer to Using the Browser Screen on page 3-50.
4
To exit the browser, press [X] (Close) and then
press [Yes] in the exit confirmation screen.
The application list screen reappears.
NOTE: You can specify preferences such as the way
the Internet browser screen is displayed. For details,
refer to Internet Browser Setup (page 8-67).
3-49
Basic Operation
Using the Browser Screen
The operations available in the Internet browser screen are shown below.
Search box
Pressing the text box displays a keyboard.
You can then perform a search by entering
a keyword and pressing the [Search].
Title bar
Displays the page title.
Close
Closes the Internet browser and returns
you to the application list screen.
KYOCERA MITA
Scroll bars
These allow you to scroll the
displayed page up, down, left
and right by pressing [
], [
],
[
] or [
] or by moving one of
the slide bars with your finger.
Security lock icon
Displayed when you are viewing
a protected page.
Enter URL
Search
Menu
Status
10/10/2008
10:10
Loader/Progress bar
Shows the status of page
loading. When the browser is
loading a web page, the loader
changes to an animated display.
Menu
Displays the browser setup menu. You can use
this menu to specify the browser's display
magnification, set the text encoding scheme
and check the server certificate.
Enter URL
Use this display a desired web
page by entering the URL for
that page.
Home page
Displays your specified home page.
You can set your home page in the
Browser Preferences on page 8-67.
Search (Search Internet/Retrieval in page)
Displays a search menu in which you can select [Retrieval
in page] or an Internet search site.
Search Internet:
Use the selected search site to search
with the entered keyword.
Retrieval in page: Search from the entered keyword in
the currently displayed page. You can
continue your search by pressing
[SearchUp] or [SearchDown].
Reload
Updates the page.
Back/Forward
Displays the previous
page or the next page.
NOTE: Pressing the Reset key while the Internet browser is displayed will exit the browser and return you to
the application list screen without displaying the browser exit
3-50
4 Copying Functions
This chapter explains the functions available for copying.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Original Size........................................................................................4-2
Paper Selection...................................................................................4-3
Mixed Size Originals ...........................................................................4-6
Original Orientation .............................................................................4-9
Output Destination ............................................................................4-11
Combine Mode..................................................................................4-12
Margin/Centering Mode ....................................................................4-14
Border Erase.....................................................................................4-16
Booklet from Sheets..........................................................................4-18
Cover Mode ......................................................................................4-21
Form Overlay ....................................................................................4-22
Page Numbering ...............................................................................4-23
Memo Mode ......................................................................................4-24
Poster................................................................................................4-26
Image Repeat/Double Copy..............................................................4-27
EcoPrint ............................................................................................4-29
Single Color Copy .............................................................................4-29
Color Balance Adjust ........................................................................4-30
Hue Adjustment ................................................................................4-31
One-touch Image Adjust ...................................................................4-33
Sharpness Adjust..............................................................................4-34
Background Density Adjust...............................................................4-35
Continuous Scan...............................................................................4-36
Auto Image Rotation .........................................................................4-37
Negative Image.................................................................................4-37
Mirror Image......................................................................................4-38
Job Finish Notice ..............................................................................4-39
File Name..........................................................................................4-41
Priority Override ................................................................................4-41
Repeat Copy .....................................................................................4-42
OHP Backing Sheet Mode ................................................................4-44
4-1
Copying Functions
Original Size
Specify the size of originals being scanned. Be sure to specify the original size when copying non-standard
sizes.
The following options are available.
Item
How to Select
Sizes
Have the size of original
detected automatically, or
select from the standard
sizes.
Inch models: Auto, Ledger, Legal, Letter, Letter-R,
Statement, Statement-R, 8.5×13.5", Oficio II and
11×15"
Select from the standard
sizes not included in the
Standard Sizes 1.
Inch models: A3, B4, A4, A4-R, B5, B5-R, A5, A5-R,
B6, B6-R, A6-R, Folio, 8K, 16K and 16K-R
Others
Select from envelope,
postcard or the custom sized
originals*.
Hagaki, Oufuku Hagaki, Custom 1 to 4
Size Entry
Enter the size not included in
the standard sizes 1 and 2**.
Inch models
Horizontal: 2 to 17" (in 0.01" increments), Vertical: 2 to
11.69" (in 0.01" increments)
Standard
Sizes 1
Standard
Sizes 2
Metric models: Auto, A3, B4, A4,
A4-R, B5, B5-R, A5, A5-R, B6, B6-R, A6-R and Folio
Metric models: Ledger, Legal, Letter, Letter-R,
Statement, Statement-R, 8.5×13.5", Oficio II, 11×15",
8K, 16K and 16K-R
Metric models
Horizontal: 50 to 432 mm (in 1 mm increments),
Vertical: 50 to 297 mm (in 1 mm increments)
*
**
For instructions on how to specify the custom original sizes (Custom 1 to 4), refer to
Custom Original Size Setup on page 8-4.
The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 8-11.
Use the procedure below to select the original size.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Original
Size].
4-2
Copying Functions
4
Copies
Ready to copy.
Press [Standard Sizes 1 ], [Standard Sizes 2 ],
[Others] or [Size Entry] to select the original size.
Original Size
Standard
Sizes 1
Place original.
Standard
Sizes 2
Auto
Ledger
Letter
Letter
Legal
Statement
Statement
11x15"
8.5x13.5"
Others
OficioII
Original
Zoom
Paper
: --: 100%
: ---
Size Entry
Preview
Cancel
Add Shortcut
4
OK
Status
10/10/2008
10:10
If [Size Entry] is selected, press [+] or [-] to specify
the horizontal size (X) and the vertical size (Y).
Press [# Keys] to enter the size directly using the
numeric keys.
Copies
Ready to copy.
Original Size
Standard
Sizes 1
Place original.
X
17
Standard
Sizes 2
# Keys
Others
Y
Original
Zoom
Paper
: --: 100%
: ---
(2.00 - 17.00)
"
(2.00 - 11.69)
"
11
Size Entry
Preview
5
Press [OK].
6
Press the Start key to start copying.
# Keys
Add Shortcut
Cancel
OK
Status
10/10/2008
10:10
Paper Selection
Select the paper source that contains the required paper size.
NOTE: Specify in advance the size and type of the paper loaded in the cassette (refer to Original/Paper
Settings on page 8-4).
Selecting the Cassette
Use the procedure below to select the paper supply cassette.
Copies
Ready to copy.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Paper
Selection].
4
Press the key of the paper source corresponding to
the required paper size. The cassette in which the
paper is loaded is selected.
Paper Selection
Place original.
Original
Zoom
Paper
: --: 100%
: --Preview
Add Shortcut
Status
If [Auto] is selected, the paper matching the size of
the original is selected automatically.
Auto
Letter
Plain
Letter
Plain
Ledger
Plain
MP Tray
Setting
5
Press [OK].
6
Press the Start key to start copying.
Letter
Plain
Letter
Plain
Cancel
OK
10/10/2008
10:10
4-3
Copying Functions
Selecting the Multi Purpose Tray
Change the paper size and media type.
The available paper sizes and media types are shown in the table below.
Category
Paper
Size
Item
Standard
Sizes 1
*
**
***
Sizes
Choose from
the standard
size.
Inch models: Ledger, Legal, Letter, Letter-R,
Statement, 8.5×13.5", Oficio II and Executive
Choose from
the standard
sizes not
included in
the Standard
Sizes 1.
Inch models: A3, B4, A4, A4-R, B5, B5-R, A5-R,
B6-R, A6-R, Folio, 8K, 16K and 16K-R
Others
Choose from
non-standard
sizes and
custom
sizes.
ISO B5, Envelope #10 (Commercial #10),
Envelope #9 (Commercial #9), Envelope #6
(Commercial #6 3/4), Envelope Monarch,
Envelope DL, Envelope C5, Envelope C4,
Hagaki, Oufuku Hagaki, Youkei 4, Youkei 2 and
Custom 1 to 4*
Size
Entry
Enter the
size not
included in
the standard
sizes 1 and
2**.
Inch models
Horizontal: 5.83 to 17" (in 0.01" increments),
Vertical: 3.86 to 11.69" (in 0.01" increments)
Standard
Sizes 2
Media
Type
How to
Select
Metric models: A3, B4, A4, A4-R, B5, B5-R,
A5-R, B6, B6-R, A6-R and Folio
Metric models: Ledger, Legal, Letter, Letter-R,
Statement, 8.5×13.5", Oficio II, Executive, 8K,
16K and 16K-R
Metric models
Vertical: 98 to 297 mm (in 1 mm increments),
Horizontal: 148 to 432 mm (in 1 mm increments)
Plain (105 g/m2 or less), Transparency, Rough,
Vellum (64 g/m2 or less), Labels, Recycled, Preprinted***, Bond, Cardstock,
Color, Prepunched***, Letterhead***,
Thick (106 g/m2 or more), Envelope, Coated, High Quality, Custom 1 to 8***
For instructions on how to specify the custom paper sizes (Custom 1 to 4), refer to Adding
a Custom Size and Media Type for Paper to Print on page 8-4.
The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 8-11.
For instructions on how to specify the custom paper types 1 to 8, refer to Paper Weight on
page 8-7.
To print on preprinted or prepunched paper or on letterhead, refer to Special Paper
Action on page 8-10.
NOTE: You can conveniently select in advance the size and type of paper that will be used often and set them
as default (refer to Paper Size and Media Type Setup for Multi Purpose Tray on page 8-6).
4-4
Copying Functions
Use the procedure below to select the paper size and media type.
Copies
Ready to copy.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing], [Paper Selection]
and then [MP Tray Setting].
4
Press [Standard Sizes 1 ], [Standard Sizes 2 ],
[Others] or [Size Entry] to select the paper size.
4
Paper Selection - MP Tray Setting
Standard
Sizes 1
Standard
Sizes 2
Ledger
Letter
Letter
Legal
Statement
Executive
8.5x13.5"
OficioII
Others
Size Entry
Plain
Media Type
Cancel
Status
OK
10/10/2008
10:10
If you select [Size Entry], press [+] or [–] to specify
X (horizontal) and Y (vertical) sizes. You can enter
the size directly using the numeric keys after
pressing [# Keys].
Copies
Ready to copy.
Original Size
Standard
Sizes 1
X
(5.83 - 17.00)
"
17
Standard
Sizes 2
# Keys
Others
Y
5
Press [Media Type].
6
Select paper type, and press [OK].
7
Press [OK].
8
Press [OK].
9
Press the Start key to start scanning the originals.
(3.86 - 11.69)
"
11
Size Entry
Plain
Media Type
# Keys
Cancel
Status
OK
10/10/2008
10:10
10 When the machine is ready, the confirmation
screen for the specified paper appears. Load the
required paper in the multi purpose tray and press
[Continue] to start copying.
4-5
Copying Functions
Mixed Size Originals
Using the optional document processor, the originals of different sizes can be loaded in a batch and copied. In
this operation, up to 30 originals of different sizes can be placed in the document processor at the same time.
Supported Combinations of Originals
Originals of the Same Width
The supported combinations of originals are as follows.
Ledger and Letter (A3 and A4)
Ledger
Letter
Letter
Ledger
Ledger and Letter-R (Folio and A4-R)
Legal
Letter-R
B4 and B5
4-6
Letter-R
Legal
Copying Functions
Originals of Different Widths (Available for metric models only)
Place all originals of different widths. The supported combinations of originals are as follows.
NOTE: When mixing the original sizes as using the following combination: Folio, A4-R, and B5-R, make sure
to set the System Menu key -> Common Settings -> Original / Paper Settings -> Original Auto Detect to [On]
for [Folio].
For more information, refer to Automatic Detection of Originals (Available for metric models only) on page 8-9.
4
A3, B4, A4 and B5
B4, A4-R and B5
Folio, A4-R and B5-R
4-7
Copying Functions
Selecting How to Copy Originals
Select whether you wish to create individual copies on different size paper matching the original sizes or to
produce all copies on the same size paper.
NOTE: This function is available regardless of whether originals have the same width or not.
The table below shows the finished document sizes for the different original size options.
Option
Description
Mixed Size Copies
Originals are detected individually for size and
copied to the same size paper as originals.
Same Size Copies
Originals are all copied to the same size paper.
Use the procedure below to copy mixed size originals.
1
Press the Copy key.
2
Place originals on the document processor.
IMPORTANT: When placing originals of different
widths, be sure to flush them against the document
width guide toward the back of the machine.
Ready to copy.
Copies
3
Press [Org./Paper/Finishing] and then [Mixed Size
Originals].
4
Select [Mixed Size Copies] or [Same Size Copies]
as finish size.
5
Select the combination of originals from [Same
Width] and [Different Width].
When [Same Size Copies] is selected, select [Long
Edge Left] or [Short Edge Left] as the first original
orientation.
6
Press [OK].
7
Press the Start key to start copying.
Mixed Size Originals
Original Width
Off
Place original.
Mixed Size
Copies
Same Size
Copies
Original
Zoom
Paper
: --: 100%
: ---
Same Width
Different
Width
Top Page Direction
Long Edge
Left
Short Edge
Left
Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
4-8
Copying Functions
Original Orientation
Select the original orientation to use the following functions.
•
Zoom (XY Zoom)
•
Duplex
•
Margin/Centering originals
•
Border erase
•
Combine mode
•
Memo mode
•
Page numbering
•
Booklets
•
Stapling/Punch (optional feature)
*
If [On] is selected as the Orientation Confirmation on page 8-15 setting in the System Menu, the selection
screen for original orientation appears when you select any of the above functions.
4
When placing originals on the platen
Original
[Top Edge Top]
[Top Edge Left]
When placing originals on the optional document processor
Original
[Top Edge Top]
[Top Edge Left]
NOTE: To change the default setting for the original orientation, refer to Original Orientation on page 8-16.
4-9
Copying Functions
Use the procedure below to select the orientation when placing the originals on the platen.
Ready to copy.
Copies
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Original
Orientation].
4
Select [Top Edge Top] or [Top Edge Left] as the way
the original is oriented.
5
Press [OK].
6
Press the Start key to start copying.
Original Orientation
Select the orientation of the
original document's top edge.
Place original.
Original
Zoom
Paper
: --: 100%
: ---
Top Edge Top
Top Edge Left
Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
4-10
Copying Functions
Output Destination
You can use the procedure below to select an output destination such as the optional document finisher for your
copies.
NOTE: Optional output destinations include the job separator, document finisher, 3,000 sheet document
finisher, and mailbox.
The table below shows the available output destinations.
4
Destination
Description
Top tray
Top tray of the machine (where copies are stored)
Finisher Tray*
Tray of the optional document finisher
Tray A, Tray B*, Tray C*
Trays A to C in the optional 3,000 sheet document finisher
Job Separator Tray
Optional job separator
Tray 1 to 7*
Trays 1 to 7 in the optional mailbox (tray 1 is the top tray)
*
Copy output orientation can be selected either as face-up (print facing up) or facedown (print facing down).
NOTE: To change default destination for copies, refer to Paper Output on page 8-14 for details.
Use the procedure below to select the output destination.
Ready to copy.
Copies
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Paper
Output].
4
Select the output destination for finished copies.
When you select [Finisher Tray], [Tray B], [Tray C]
or [Tray 1] to [Tray 7], select the orientation of
output copy, Face Up (print facing up) or Face
Down (print facing down).
Paper Output
Face Up
Place original.
Original
Zoom
Paper
: --: 100%
: ---
Face Down
Top Tray
Tray A
Tray B
Tray C
Job Separator
Tray
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
Tray 6
Tray 7
Preview
Add Shortcut
Status
Cancel
5
Press [OK].
6
Press the Start key to start copying.
OK
10/10/2008
10:10
4-11
Copying Functions
Combine Mode
This mode allows you to copy 2 or 4 originals combined onto a single page. 2-in-1 mode or 4-in-1 mode. The
page boundary of each original can be indicated.
NOTE: Combine mode is available for the copy paper sizes of A3, B4, Folio, A4, A4-R, B5, B5-R, A5-R,
Ledger, Legal, Oficio II, 8.5×13.5", Letter, Letter-R, Statement-R, 8K, 16K and 16K-R.
2-in-1 Mode
For copying two originals onto a single sheet. This mode can be used with Duplex mode to copy four originals
onto one sheet.
The following 2-in-1 options and output orientations are available.
Original
Copy
Orientation of Original
Platen
Document processor
NOTE: When placing the original on the platen, be sure to copy the originals in page order.
4-in-1 Mode
For copying four originals onto a single sheet. This mode can be used with Duplex mode to copy eight originals
onto one sheet.
The following 4-in-1 options and output orientations are available.
Original
Copy
Orientation of Original
Platen
4-12
Document processor
Copying Functions
NOTE: When placing the original on the platen, be sure to copy the originals in page order.
Types of Page Boundary Lines
The following types of the boundary lines are available.
4
None
Solid
Dotted
Borders
(Cropmark)
The procedure for using Combine mode copying is explained below.
Copies
Ready to copy.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Combine].
4
Press [2 in 1] or [4 in 1], and choose the page layout
of Layout.
5
Press [Border Line] to choose the type of the lines
to indicate page boundaries. Press [OK].
6
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
7
Press [OK].
8
Press the Start key. Copying begins.
Combine
Layout
Off
Place original.
2 in 1
Right then
Down
Left then
Down
None
4 in 1
Border Line
Original
Zoom
Paper
: --: 100%
: ---
Top Edge Top
Down then
Right
Down then
Left
Preview
Add Shortcut
Status
Cancel
Original
Orientation
OK
10/10/2008
10:10
If the original is placed on the platen, replace the
original and press the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
4-13
Copying Functions
Margin/Centering Mode
Shift the original image to make space on the copy for binding on the left (right) or top (bottom) side.
When you copy onto paper different from the original size, you can center the original image on the paper.
The following margin widths are available.
Input units
Margin Width
Inch Models
-0.75 to 0.75" (in 0.01" increments)
Metric Models
-18 mm to 18 mm (in 1-mm increments)
Margin on the Back Side
When duplex copying, you can also specify the margin on the back side.
Auto
When [Auto] is selected, an appropriate margin is applied automatically on the rear page depending on a margin
specified for the front page and a binding orientation.
Separate Front/Back Margins
Enables you to specify the front and back settings separately.
NOTE: You can set the default margin width. Refer to Margin Default on page 8-22 for details.
Use the procedure below to make copies with margins.
Copies
Ready to copy.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Margin/Centering].
4
Press [Margin] to select the copy with margin.
Use [+] or [–] to enter the margins for Left/Right and
Top/Bottom. Press [# Keys] to use the numeric
keys for entry.
Margin/Centering
Left/Right
Off
(-18 - +18)
0
Place original.
Margin
Top/Bottom
Add Shortcut
Status
(-0.75 - +0.75)
"
For duplex copying, press [Back Page] and select
[Auto] or [Manual].
Back Page
0
: --: 100%
: --Preview
Auto
# Keys
Centering
Original
Zoom
Paper
"
Top Edge Top
# Keys
Cancel
Original
Orientation
OK
10/10/2008
10:10
4-14
Copying Functions
If you selected [Auto], press [OK]. If you pressed
[Manual], enter the margins in the displayed screen
and then press [OK].
Copies
Ready to copy.
Margin/Centering - Back Page
Auto
Place original.
Left/Right
(-0.75 - +0.75)
"
0.25
Manual
# Keys
Top/Bottom
Original
Zoom
Paper
(-0.75 - +0.75)
"
0.25
: --: 100%
: --Preview
# Keys
Add Shortcut
Cancel
Status
4
OK
10/10/2008
10:10
Press [Centering] to center the original image on
the paper.
Copies
Ready to copy.
Margin/Centering
Off
Place original.
5
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
6
Press [OK].
7
Press the Start key to start copying.
Margin
Centering
Original
: ---
Zoom
Paper
: 100%
: ---
Top Edge Top
Original
Orientation
Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
4-15
Copying Functions
Border Erase
Use Border Erase to remove black shadows that appear around the outside of the original when making copies.
The following options can be selected.
Border Erase Sheet
Erases black borders around the single sheet original.
Original
Copy
Border Erase Book
Erases black borders around the edges and in the
middle of the original such as a thick book. You can
specify the widths individually to erase the borders
around the edges and in the center of the book.
Original
Copy
Individual Border Erase
Specify border erase widths individually for all edges.
Original
Copy
In each option, the available ranges are as below.
Input units
Border Erase Range
Inch Models
0 to 2"(in 0.01" increments)
Metric Models
0 mm to 50 mm (in 1-mm increments)
NOTE: To specify the default width value of Border Erase, refer to Border Erase Default on page 8-21 for
details.
4-16
Copying Functions
Border Erase to Back Page
When scanning a 2-sided original, this allows you to erase the borders on the back of the original. The table
below shows the available settings.
Item
Detail
Same as Front
Page
Border Erase performed using the same setting
as the front page
Do Not Erase
No Border Erase performed on the back page
NOTE: You can change the default setting for Border Erase to Back Page. For details, refer to Paper
Selection on page 8-27.
Use the procedure below to erase borders when copying.
Copies
Ready to copy.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Border Erase].
4
Select [Border Erase Sheet] to erase borders for an
individual sheet or [Border Erase Book] to erase
borders for a book.
Border Erase
Border
Off
(-0.75 - +0.75)
"
0.25
Border Erase
Book
Original
: ---
Zoom
Paper
: 100%
: ---
Use [+] or [–] to enter the width in Border or Gutter.
Press [# Keys] to use the numeric keys for entry.
Border Erase
Sheet
Place original.
Same as
Front Page
# Keys
(-0.75 - +0.75)
"
Gutter
Back Page
0.25
Individual
Border Erase
Preview
# Keys
Add Shortcut
Cancel
OK
Status
10/10/2008
10:10
Press [Individual Border Erase] to select the
individual border erase.
Copies
Ready to copy.
Border Erase
(0.00 - 2.00)
Off
Place original.
Original
Zoom
Paper
:
--: 100%
:
--Preview
Add Shortcut
Status
Top
0.25
"
Border Erase
Sheet
Bottom
0.25
"
Border Erase
Book
Left
0.25
"
Individual
Border Erase
Right
0.25
"
Use [+] or [–] to enter the width in Top, Bottom, Left
or Right. Press [# Keys] to use the numeric keys for
entry.
Same as
Front Page
Back Page
Press [Original Orientation] to select the original
orientation from either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
Top Edge Top
# Keys
Cancel
Original
Orientation
OK
10/10/2008
For 2-sided originals, press [Back Page] and then
press [Same as Front Page] or [Do Not Erase].
10:10
5
Press [OK].
6
Press the Start key to start copying.
4-17
4
Copying Functions
Booklet from Sheets
The Booklet copying option allows you to copy sheet originals and produce booklets such as small brochures
or pamphlets. A booklet, such as a magazine, is made by folding at the center.
You can copy the cover page onto colored paper or thick paper. Paper for the cover is supplied from the multi
purpose tray. To feed the cover paper from the cassette, refer to Paper Source for Cover Paper on page 8-10.
NOTE: Using the optional 3,000 sheet document finisher and the folding unit enables you to saddle stitch your
copies (fold them in two with staples in the center). This is limited to the A3, B4, A4-R, Ledger, Legal, Letter-R.
The supported original and paper sizes are as follows.
Type of Original
One-sided original,
Two-sided original
Book original
*
Original Size
Paper Size
All*
A3, B4, A4, A4-R, B5, B5-R, A5, A5-R,
Ledger, Legal, Letter and Letter-R
All*
A3, B4, A4-R, Ledger, Legal and Letter-R
A3, B4, A4-R, B5-R, A5-R,
Ledger, Letter-R and 8K
A4, A4-R, B5, B5-R, Letter and Letter-R
A3, B4, A4-R, B5-R, A5-R,
Ledger and Letter-R
A4-R and Letter-R
Except for custom sized originals.
For binding on the left side
The folded copies can be read from left to right.
Original
Copy
For binding on the right side
The folded copies can be read from right to left.
Original
Copy
4-18
Copying Functions
For top binding
The folded copies can be read from top to bottom.
Original
Copy
The procedure for using Booklet copying is explained below.
Ready to copy.
Copies
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Booklet].
4
Press [1-sided>>Booklet] to produce a booklet
from single-sided originals.
Booklet
Off
Original
Place original.
1-sided
>>Booklet
Press [2-sided>>Booklet] to produce a booklet
from two-sided originals.
Off
Binding
Left/Right
Cover
Binding
Top
Off
2-sided
>>Booklet
Original
Zoom
Paper
: --: 100%
: --Preview
Add Shortcut
Status
Book
>>Booklet
Press [Book>>Booklet] to produce a booklet from
an open book original.
Finishing
Binding
Left
Binding
Right
Binding
Top
Cancel
Saddle
Stitch
Top Edge Top
Original
Orientation
OK
10/10/2008
10:10
5
If you selected [2-sided>>Booklet] or
[Book>>Booklet], choose the binding orientation in
Finishing.
If you selected [1-sided>>Booklet], choose the
binding orientation in Finishing.
6
If you choose [1-sided>>Booklet],
[2-sided>>Booklet], or [Book>>Booklet] you can
add the cover. Press [Cover], select [Cover] and
press [OK].
7
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
8
If the optional 3,000 sheet document finisher and
folding unit are installed, the [Saddle Stitch] option
is displayed.
To use saddle stitching, press [Saddle Stitch] and
then press [Bind and Fold]. You can saddle stitch
up to 16 sheets (64 pages).
9
Press [OK].
10 Platen and press the Start key. Copying begins.
4-19
4
Copying Functions
NOTE: When using the platen, be sure to place the
originals in page order.
If the originals are placed on the platen,
consecutively replace each original after pressing
the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
4-20
Copying Functions
Cover Mode
Add a cover to the finished copies. You can copy the first page and/or the last page onto colored paper or thick
paper fed from the different paper source than the regular one. The following two options are available. Paper
for the cover is supplied from the multi purpose tray.
To feed the cover paper from the cassette, refer to Paper Source for Cover Paper on page 8-10.
Type of Cover
Description
Front Cover
First page of the originals is copied on a different
paper.
Front and Back
Covers
First page and last page of the originals are
copied on different paper.
The procedure for using Cover mode copying is explained below.
Ready to copy.
Copies
1
Cover
Place original.
Original
Zoom
Paper
: --: 100%
: ---
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Cover].
4
Press [Front Cover] or [Front and Back Covers].
5
Press [OK].
6
Press the Start key. Copying begins.
Print cover pages on the different type of
paper, using a different paper source.
Select either [Front Cover] or
[Front and Back Covers].
*Set paper source for cover in System Menu.
Off
Front Cover
Front and Back
Covers
Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
If the originals are placed on the platen,
consecutively replace each original after pressing
the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
4-21
4
Copying Functions
Form Overlay
Copy the original images onto the form. Once you scan
and register the form, the form is overlaid onto the
original. You can also use a form that is already
registered in the machine's memory.
Density
:30%
Forms
Original
Copy
NOTE: To register a form in advance, refer to Form for
Form Overlay Box on page 6-17 for details.
Density
:100%
Follow the steps as below for form overlay.
Ready to copy.
Copies
1
1
Press the Copy key.
2
Press [Layout/Edit] and then [Form Overlay].
3
Press [Scan New Form] to use the first page of
originals as a form.
Form Overlay
Off
Place original.
Density
(10 㵨 30, 100)
10
%
NOTE: You can select the form density setting through
4 levels from 10%, 20%, 30% or 100%. Press the [+] or
[-] buttons in Density.
Select
Stored Form
Scan
New Form
Original
: ---
Zoom
Paper
: 100%
: ---
None
Select
Form
Preview
Add Shortcut
Cancel
OK
10/10/2008
Status
10:10
To use the forms already registered, press [Select
Stored Form]. Press [Select Form] to display the
document boxes that store documents which can
be used as a form. Select the desired form from the
list and press [OK].
Copies
Ready to copy.
1
Form Overlay - Select Form
Document Box
Box Name
Up
Form for Form Overlay
Custom Box
Detail
NOTE: To return to a higher level folder, press [Up].
1/1
Preview
Open
Cancel
Status
OK
10/10/2008
10:10
4
Press [OK].
5
Place the originals.
Place the original for the form on top of the other
originals. When using the optional document
processor, the first page of the originals should be
placed on the top.
6
4-22
Press the Start key to start copying.
Copying Functions
Page Numbering
Number multiple pages of originals in sequential order. The formats for numbering are [-1-], [P.1] or [1/n]. The
format [1/n] prints the total number of pages in the place of n.
Select Top Left, Top Middle, Top Right, Bottom Left, Bottom Middle or Bottom Right as the page numbering
position.
4
Original
[ – 1 –]
[P.1]
[1/n]
Use the procedure below to insert page numbers on your copies.
Ready to copy.
Copies
1
1
Press the Copy key.
2
Place the originals in the document processor or on
the platen.
3
Press [Layout/Edit] and then [Page #].
4
Select the numbering format from [-1-], [P.1] or
[1/n].
5
Select the page numbering position.
6
To start page numbering from a page other than the
first page, press [+] or [–] of 1st Page and select the
starting page. You can also enter the number with
the numeric keys after pressing [# Keys].
7
To start the numbering with a number other than 1,
press [+] or [–] of Start Number and enter the
starting number. You can also enter the number
with the numeric keys after pressing [# Keys].
8
If you do not want page numbering through to the
last page, press [Last Page]. Select Manual and
use [+] or [-] to enter the final page to be numbered
(a negative number of pages counting backwards
from the last page). Then press [OK]. You can set a
value up to -10. You can also enter the number with
the numeric keys after pressing [# Keys].
Page #
Auto
Position
Off
-1-
Top
Left
Top
Middle
Top
Right
Bottom
Left
Bottom
Middle
Bottom
Right
Last Page
Auto
P.1
1st Page
Start #
(1 - 10)
(1 - 999)
1
1/n
Denominator
#
1
Top Edge Top
# Keys
# Keys
Cancel
Status
Original
Orientation
OK
10/10/2008
10:10
4-23
Copying Functions
9
The total number of pages n in the format [1/n] can
be changed manually. Press [Denominator #] and
select [Manual]. Press [+] or [–] to enter the total
number of pages and press [OK]. You can also
enter the number with the numeric keys after
pressing [# Keys].
10 Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Press [OK].
11 Press [OK].
12 Press the Start key to start copying.
Memo Mode
Delivers copies with a space for adding notes. You can also copy two originals onto the same sheet with a space
or add lines to indicate page boundaries.
NOTE: Memo mode is available for the copy paper sizes of Ledger, Legal, Oficio II, 8.5×13.5", Letter, Letter-R,
Statement-R, A3, B4, Folio, A4, A4-R, B5, B5-R, A5-R, 8K, 16K and 16K-R.
Layout A
Reduces images of each original page for printing onto
half of a page, leaving the other half blank for notes.
Original
Copy
Layout B
Reduces images of two original pages for copying onto
half of a single page, leaving the other half blank for
notes.
Original
Copy
4-24
Copying Functions
Types of Page Boundary Lines
The following boundary lines are available.
4
None
Solid
Dotted
Borders
(Cropmark)
Use the procedure below to insert page boundary lines on your copies.
Copies
Ready to copy.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Memo Page].
4
Press [Layout A] or [Layout B]. Select the page
layout from Layout.
5
Press [Border Line] to select the page boundary
line. Press [OK].
6
Press [Original Orientation] to select orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Press [OK].
7
Press [OK].
8
Press the Start key to start copying.
Memo Page
Layout
Off
Place original.
Layout A
Top
L to R
Top
R to L
None
Layout B
Border Line
Original
Zoom
Paper
: --: 100%
: ---
Top Edge Top
Top
L to B
Top
R to B
Preview
Add Shortcut
Status
Cancel
Original
Orientation
OK
10/10/2008
10:10
4-25
Copying Functions
Poster
For using this device to make copies larger than the
maximum paper size, use Poster mode to separate and
copy an enlarged image onto multiple pages.
The completed copies have overlapping areas. A single
large page can be created by pasting those areas
together.
Original
Choose one of the following 3 enlargement settings:
Copy
•
Copy size – The output paper size is chosen from
the following sizes. Copy is enlarged according to
the selected paper size.
Model Type
Paper size
Inch models
34 × 44", 22 × 34", 17 × 22"
Metric models
A0, A1, A2
•
Zoom prioirty – Specify the output zoom size from
100 to 400%. Image will be output on the necessary
number of copies for the specified zoom size.
•
Number of sheets – Select number of sheets to
split the image from 2, 4, or 8 sheets. Copy is
enlarged according to the selected number.
NOTE: The available original sizes are 11 × 17",
8 1/2 × 11", A3 and A4R. The available paper sizes
are 11 × 17" and A3 only.
Follow the steps as below to use poster enlargement.
Copies
Ready to copy.
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then press [Poster].
4
Select enlargement method.
If [Copy Size] is selected, set the output paper size.
Poster
Off
Place original.
Separate and copy an image suitable for
the selected copy size.
If [Zoom Priority] is selected, set the output zoom
size.
Copy Size
Zoom
Priority
Original
Zoom
Paper
: --: 100%
: ---
If [Number of Sheets] is selected, set the number of
split pages.
Number of
Sheets
34x44"
22x34"
17x22"
Preview
Add Shortcut
Status
Cancel
5
Press [OK].
6
Press the Start key. Copying begins.
OK
10/10/2008
10:10
4-26
Copying Functions
Image Repeat/Double Copy
Tiles the 1 copied sheet with an original image. You can
also specify the area of the original to repeat.
Image Repeat
Copies the original image multiple times onto 1 sheet at
a specified magnification.
You can also specify how much of the original is
repeatedly copied.
Original
Copy
Double Copy
Makes 2 copies of the same original on a single sheet.
For example, you can double-copy an A4 original onto
an A3 sheet which you then cut in half to make 2 copies
that are identical to the original.
Original
Copy
Follow the steps as below to use Image Repeat/Double Copy.
Ready to copy.
Copies
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then press [Image Repeat].
4
Press [Zoom Priority].
1
To make double copies, press [Double Copy] and
proceed to step 8.
Image Repeat
(25 - 400)
Off
100
Place original.
%
Zoom
Priority
Double
Copy
5
# Keys
Press [+] or [–] to set the zoom size.
Press [# Keys] to enter with numeric keys.
Original
: ---
Zoom
Paper
: 100%
: ---
Off
Add Shortcut
Status
6
Specify
Repeat Area
Preview
Cancel
OK
10/10/2008
10:10
4-27
To set the area of the original to be repeated, press
[On] for Specify Repeat Area.
4
Copying Functions
7
Press [+] or [–] to input the area of the original to be
repeated.
With metric models, you can enter the border width
directly using the numeric keys after pressing [#Keys].
Y1: Length from top left of platen to top edge of
repeat area
X1: Length from Height from top left of platen to left
edge of repeat area
Y2: Height of repeat area
X2: Width of repeat area
8
Press [OK].
9
Press the Start key. Copying begins.
4-28
Copying Functions
EcoPrint
Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion where high
quality print is unnecessary.
The procedure for making copies using EcoPrint is explained below.
Ready to copy.
Copies
EcoPrint
Place original.
Original
Zoom
Paper
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [EcoPrint].
4
Press [On].
5
Press [OK].
6
Press the Start key to start copying.
Conserve toner when printing.
Use EcoPrint for test copies
and other situations where high-quality
copies are not necessary.
: --: 100%
: ---
On
Off
Preview
Add Shortcut
Cancel
OK
10/10/2008
Status
10:10
Single Color Copy
Specify one of Cyan, Magenta, Yellow, Red, Green, or Blue, and produce copies with that color regardless of
original type.
Follow the steps as below for Single Color Copy.
Ready to copy.
Copies
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality], [Color Selection] and
then press [Single Color].
4
Select color for copying from [Cyan], [Magenta],
[Yellow], [Red], [Green] or [Blue].
5
Press [OK].
6
Press the Start key. Copying begins.
1
Color Selection
Auto Color
Place original.
Single Color
Full Color
Cyan
Magenta
Yellow
Red
Green
Blue
Black &
White
Original
Zoom
Paper
: --: 100%
: ---
Single Color
Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
4-29
4
Copying Functions
Color Balance Adjust
Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see page 3-8).
This feature can not be used together with One touch Image Adjust (see page 4-33).
Refer to the sample image in Quick Guide to Adjusting Image Quality.
Follow the steps below to adjust color balance.
Ready to copy.
Copies
Color Balance
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then press [Color
Balance].
4
Press [On].
5
Press [ ] or [ ] on each side of the color to be
adjusted (Cyan, Magenta, Yellow, Black) to adjust
each color.
6
Press [OK].
7
Press the Start key. Copying begins.
Off
-5 -4 -3 -2 -1 0
1
2
3
4
5
Magenta -5 -4 -3 -2 -1 0
1
2
3
4
5
Yellow
-5 -4 -3 -2 -1 0
1
2
3
4
5
Black
-5 -4 -3 -2 -1 0
1
2
3
4
5
Cyan
Place original.
Original
Zoom
Paper
: --: 100%
: ---
On
Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
4-30
Copying Functions
Hue Adjustment
Adjust the color (hue) of images. Make adjustments such as adjusting red to a strong yellow-red or yellow to a
strong green-yellow to make more creative copies.
The items that may be configured are as follows.
Yellow
Red
Green
Magenta
•
All: Adjust hue for all colors.
•
Yellow - Green & Blue - Magenta: Adjust color
balance for yellow and green, and blue and magenta.
Green - Cyan & Magenta - Red: Adjust color balance
for green and cyan, and magenta and red.
Cyan - Blue & Red - Yellow: Adjust color balance
for cyan and blue, and red and yellow.
•
•
Cyan
Blue
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting
Density (see page 3-8).
This feature can not be used together with One touch
Image Adjust mode (see page 4-33).
These adjustments are especially useful on rich color
images.
Follow the steps below to use image hue adjustment.
Ready to copy.
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then press [Hue
Adjustment].
4
Select the item for which the hue is to be adjusted
and then press [ ] or [ ] to make the adjustment.
Copies
Hue Adjustment
Off
Place original.
Yellow - Green
& Blue - Magenta
Original
: ---
Zoom
Paper
: 100%
: --Preview
Add Shortcut
Status
Adjust hue for all colors.
All
Green - Cyan
& Magenta - Red
Yellow
Red
Green
Magenta
Cyan
Blue
Cyan - Blue
& Red - Yellow
Cancel
OK
10/10/2008
10:10
4-31
4
Copying Functions
Example 1
Yellow
Red
Select [Yellow - Green & Blue - Magenta], and
press [ ] to adjust yellow closer to green, and blue
closer to magenta.
Green
Magenta
Cyan
Blue
Example 2
Yellow
Red
Select [Cyan - Blue & Red - Yellow], and press [ ]
to adjust yellow closer to red , and blue closer to
cyan.
Green
Magenta
Cyan
Blue
5
Press [OK].
6
Press the Start key. Copying begins.
4-32
Copying Functions
One-touch Image Adjust
Adjust images as desired to more vivid or more dull images.
The items that may be configured are as follows: Vivid, Dull, Sharp, Smooth, Light, Dark
Refer to the sample image in Quick Guide to Adjusting Image Quality for examples of the effect of each setting.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see page 3-8).
This feature can not be used together with Color Balance Adjust (see page 4-30).
Select from one of the 6 available One Touch Image Adjust types. Multiple selections are not possible.
Follow the steps below to use One-touch Image Adjust.
Ready to copy.
Copies
One-touch Image Adjust
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then press [Onetouch Image Adjust].
4
Select the image.
5
Press [OK].
6
Press the Start key. Copying begins.
Adjust images as desired.
Place original.
Off
Original
Zoom
Paper
: --: 100%
: ---
Vivid
Dull
Sharp
Smooth
Light
Dark
Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
4-33
4
Copying Functions
Sharpness Adjust
Adjust the sharpness of image outlines. When copying penciled originals with rough or broken lines, clear copies
can be taken by adjusting sharpness toward [Sharpen]. When copying images made up of patterned dots such
as magazine photos, in which moire* patterns appear, edge softening and weakening of the moire effect can be
obtained by setting the sharpness toward [Unsharpen].
*
Patterns that are created by irregular distribution of halftone dots.
Refer to the sample image in Quick Guide to Adjusting Image Quality.
Follow the steps below to adjust sharpness.
Ready to copy.
Copies
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then Press
[Sharpness].
4
Press [-3] to [3] (Unsharpen - Sharpen) to adjust
the sharpness.
5
Press [OK].
6
Press the Start key. Copying begins.
Sharpness
Place original.
Unsharpen
-3
Original
: ---
Zoom
Paper
: 100%
: ---
Sharpen
-2
-1
0
+1
+2
+3
Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
4-34
Copying Functions
Background Density Adjust
Lightens the background of color originals with dark
backgrounds.
Original
NOTE: This feature is used with full color and auto
color copying. Background Density Adjust is disabled
during auto color copying when the a black & white
original has been detected.
Copy
4
Follow the steps below to use background density adjust.
Ready to copy.
Copies
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then press
[Background Density Adj.].
4
Press [On].
5
Press [1] to [5] (Lighter - Darker) to adjust the
background color intensity.
6
Press [OK].
7
Press the Start key. Copying begins.
Background Density Adj.
Off
Background
Lighter
Place original.
1
Original
Zoom
Paper
Darker
On
2
3
4
5
: --: 100%
: --Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
4-35
Copying Functions
Continuous Scan
When a large number of originals cannot be placed in the document processor at one time, the originals can be
scanned in separate batches and then copied as one job. With this function, originals are scanned until you
press [Scan Finish].
Any of the following settings can be changed during scanning.
•
Original size selection
•
Zoom
•
Original orientation
•
Border erase
•
Image quality selection
•
Density
•
Type of original (2-sided/book original)
•
Color Selection
If you use Job Build, you can insert a blank paper during scanning or a blank page during duplex copying.
The procedure for making copies using Continuous Scan is explained below.
Ready to copy.
Copies
1
Press the Copy key.
2
Press [Advanced Setup] and then [Continuous
Scan].
3
If Continuous Scan is selected, press [On].
If Job Build is selected, press [Job Build] and select
desired binding orientation.
Continuous Scan
Off
Place original.
Select desired binding orientation.
On
4
Press [OK].
5
Place the originals in the document processor or on
the platen and press the Start key.
Job Build
Original
Zoom
Paper
: --: 100%
: ---
Binding
Left
Preview
Add Shortcut
Binding
Right
Binding
Top
Cancel
OK
10/10/2008
Status
Scan next original(s).
Place the originals and press Start key.
Press [Finish Scan] to start copying.
Job No.: 000021
Job Name: doc20080505113414
Copies
1
User Name: -----
Scanner Setting
Finishing
㪈㪉
Original
Size
2-sided/Book
Original
Density
Original
Orientation
Zoom
Original
Image
If [Job Build] is selected, the next page can be
changed. Press [Sheet Insertion] to insert a blank
paper. Press [Next Copy: On Back] in duplex
copying to print the next page on back page.
pages
Next Copy: On Front
Border Erase
Next Copy:
On Back
Sheet
Insertion
1/2
Cancel
Status
10:10
Finish Scan
10/10/2008
10:10
6
Place the next original and press the Start key.
Repeat these steps to scan the remaining originals.
After scanning all originals, press [Finish Scan] to
start copying.
4-36
Copying Functions
Auto Image Rotation
Automatically rotates the image when the sizes of the original and the loaded paper matches but the orientations
are different. The images will be rotated 90° counter-clockwise prior to copying.
NOTE: To set Auto Image Rotation as the default mode, refer to Auto Image Rotation on page 8-22.
The procedure for making copies using Auto Image Rotation is explained below.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Auto Image
Rotation].
4
Press [On] to select Auto Image Rotation.
5
Press [OK].
6
Press the Start key to start copying.
Negative Image
Inverts black and white portions of the image for printing.
NOTE: This function is only available for black and white copy mode.
Use the procedure below to make negative image copies.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Negative
Image].
4
Press [On] to select Negative Image.
5
Press [OK].
6
Press the Start key to start copying.
4-37
4
Copying Functions
Mirror Image
Copies the mirrored image of the original.
NOTE: This function is only available for black and white copy mode.
Use the procedure below to make mirror image copies.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Mirror Image].
4
Press [On] to select Mirror Image.
5
Press [OK].
6
Press the Start key to start copying.
4-38
Copying Functions
Job Finish Notice
Sends a notice by e-mail when a job is completed. User can be notified of the completion of a copy job while
working at a remote desk, saving the time spent waiting beside the machine for copying to finish.
NOTE: PC should be configured in advance so that E-mail can be used.
Example of Job Finish Notice
To:
h_pttr@owl-net.net
Subject:
1234 Job end report mail
Job No.:
000002
Result:
OK
End Time:
Wed 27 Apr 2005 14:56:08
File Name:
doc27042005145608
Job Type:
Copy
-----------------------------------------------1234
Use the procedure below to enable job finish notification when making copies.
1 Press the Copy key.
Ready to copy.
Copies
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Job Finish Notice].
4
To select the destination from the address book,
press [Address Book] on the left of the screen and
then press [Address Book] in the next screen. Select
the destination to be notified, then press [OK].
You can view information on the notification
destination by pressing [Detail].
Job Finish Notice
Off
Destination
Address Book
User A
Detail
abc@def.com
Address
Entry
Detail
Add Shortcut
Status
Address Book
Cancel
OK
10/10/2008
10:10
4-39
4
Copying Functions
Ready to copy.
To directly enter the E-mail address, press
[Address Entry]. Press [E-mail Address], enter the
address and press [OK].
Copies
Job Finish Notice
Off
Address Book
E-mail
Address
Address
Entry
Add Shortcut
Status
Cancel
5
Press [OK].
6
Press the Start key to start copying. Upon
completion of the job, an E-mail notice is sent to the
selected destination.
OK
10/10/2008
10:10
4-40
Copying Functions
File Name
Names a copy job. Add other information such as date and time or job number as necessary. You can check a
job history or job status using the job name, date and time, or job number specified here.
Use the procedure below to assign a name to your copy job.
Ready to copy.
Copies
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [File Name Entry].
4
Press [File Name], enter the name for a copy job,
and press [OK].
File Name Entry
To add date and time, press [Date and Time]. To
add job number, [Job No.]. Added information is
displayed in Additional Info.
Add a file name.
Additional information such as Job No.
and Date and Time can also be set.
File Name
doc
Additional Info
Job No.
Job No.
5
Press [OK].
6
Press the Start key to start copying.
Date and Time
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
Priority Override
Suspends a current job and gives the selected job priority for copying. The suspended job resumes after Priority
Override copying is finished.
NOTE: The current job that is selected as Priority Override cannot be suspended.
The procedure for using Priority Override is explained below.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Priority
Override].
4
Press [On] to select Priority Override.
5
Press [OK].
6
Press the Start key. The current copy job is
suspended and the copy job selected in Priority
Override starts. The suspended job resumes after
Priority Override copying is finished.
4-41
4
Copying Functions
Repeat Copy
Enable additional copies in the desired quantity as necessary after a copy job is completed. For confidential
documents, you can set up a pass code for the use of Repeat Copy. In such a case, the correct pass code must
be entered when using Repeat Copy or copies will not be delivered.
IMPORTANT: A Repeat Copy job is cleared when the main power switch is turned off.
Repeat Copy is not available when the machine is equipped with the optional Data Security Kit.
Repeat Copy cannot be used when the maximum number of Repeat Copy jobs to retain in the document box is
set to zero (refer to Maximum Number of Repeat Copy Jobs Retained on page 4-43).
You can select Repeat Copy as default setting. Refer to Repeat Copying on page 8-24.
Giving a file name to a copy job will facilitate identification of the data when copying (refer to File Name on page
4-41).
Selecting Repeat Copy
Use the procedure below to select repeat copying.
Ready to copy.
Copies
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Repeat Copy].
4
Press [On].
To register a password, press [# Keys] and enter a
4-digit password.
Repeat Copy
Off
Password(4digits)
Place original.
On
# Keys
Original
Zoom
Paper
IMPORTANT: If you forget the pass code, Repeat Copy
will be unavailable. Make a note of the pass code
beforehand if necessary.
: --: 100%
: --Preview
Add Shortcut
Cancel
Status
OK
10/10/2008
10:10
5
Press [OK].
6
Press the Start key to start copying and register
this job as a Repeat Copy job.
Outputting Repeat Copy Jobs
The Repeat Copy jobs are stored in the Document Box. Refer to Job Box on page 3-33 to print out the Repeat
Copy jobs.
4-42
Copying Functions
Maximum Number of Repeat Copy Jobs Retained
You can use the procedure below to change the maximum number of copy jobs that can be retained in the
document box.
Use the procedure below to change the maximum number of copy jobs retained.
Document Box/Removable Memory - Repeat Copy Job Retention
1
Press the System Menu key.
2
Press [Document Box/Removable Memory] and
then [Next] of Job Box.
3
Press [Change] of Repeat Copy Job Retention.
4
Use the [+] or [-] key to enter the maximum
retention number.
Set the maximum number of repeat copy jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any jobs.
You can also enter the number from the numeric
keys.
(0 - 50)
32
job(s)
A number between 0 and 50 can be entered as the
number of retained jobs.
NOTE: If you enter a value of 0 (zero), you cannot use
Cancel
Status
OK
10/10/2008
10:10
the Repeat Copy function.
5
4-43
Press [OK].
4
Copying Functions
OHP Backing Sheet Mode
When two or three OHP transparencies are stacked on top of each other, static electricity may make them
difficult to handle. When using OHP Backing mode, a paper sheet is automatically inserted between each
transparency, making them easier to handle. Also, the same original page can be copied to the backing sheet
for multiple page copying.
NOTE: Never load OHP transparencies into trays or cassettes other than the multi purpose tray.
When OHP Backing mode is set, the multi purpose tray paper type is automatically set to Transparency.
If the optional document finisher or 3,000 sheet document finisher is installed, you may need to specify the
output destination for finished copies. For further details, refer to Output Destination on page 4-11.
Blank Sheet
Outputs a blank backing sheet after copying to a
transparency. (* denotes OHP film.)
1*
1
2
2
*
3
Original
3*
Copy
Copied Sheet
1*
1
1
2
2
3
Original
After copying to a transparency, copies the same
original image to the backing sheet paper. (* denotes
OHP film.)
*2
3
*3
Copy
Follow the steps below for OHP Backing Sheet mode.
1
Press Copy key.
2
Place the original.
3
Load the transparencies into the multi purpose tray.
IMPORTANT: Fan through the transparencies before
loading.
Up to 10 transparencies can be loaded at one time.
Be sure that paper of the same size and orientation as
the transparencies is loaded in the cassette.
4-44
Copying Functions
Copies
Ready to copy.
OHP Backing Sheet
Off
Place original.
Letter
Plain
Ledger
Plain
: --: 100%
: ---
Press [Blank Sheet] or [Copied Sheet].
6
Select the media to be fed. If you press [Auto], the
machine automatically selects media that matches
the size of the original.
7
Press [OK].
4
Letter
Plain
Letter
Plain
Preview
Add Shortcut
5
Blank Sheet
Auto
Status
Press [Advanced Setup] and then Press [OHP
Backing Sheet].
Select the paper source to feed paper.
Copied Sheet
Original
Zoom
Paper
4
Cancel
OK
10/10/2008
10:10
8
4-45
Press the Start key. Copying begins.
Copying Functions
4-46
5 Sending Functions
This chapter explains the functions available for sending originals.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Original Size Selection........................................................................5-2
Sending Size Selection .......................................................................5-3
Zoom...................................................................................................5-5
Centering ............................................................................................5-6
Mixed Size Originals ...........................................................................5-7
1-sided/2-sided Selection..................................................................5-10
Original Orientation ...........................................................................5-11
File Format........................................................................................5-12
File Separation..................................................................................5-13
PDF Encryption Functions ................................................................5-14
Image Quality....................................................................................5-16
Adjusting Density ..............................................................................5-17
Scan Resolution................................................................................5-18
Sharpness.........................................................................................5-19
Background Density Adjustment.......................................................5-20
Color / Grayscale / Black and White Selection .................................5-21
Continuous Scan...............................................................................5-22
Border Erase.....................................................................................5-23
Enter Document Name/File Name ....................................................5-25
Enter E-mail Subject and Body .........................................................5-26
WSD Scan ........................................................................................5-27
Job Finish Notice ..............................................................................5-29
Send and Print ..................................................................................5-30
Send and Store .................................................................................5-30
FTP Encrypted TX ............................................................................5-31
Color Type.........................................................................................5-31
About Color Profiles ..........................................................................5-32
5-1
Sending Functions
Original Size Selection
Select the size of originals that will serve as the basis for scanning. Be sure to select the original size when using
originals of nonstandard sizes.
Choose the original size from the following groups of original size.
Item
Detail
Standard
Sizes 1
Select from automatic
detection and standard
sizes.
Size
Inch models: Auto, Ledger, Legal, Letter, LetterR, Statement, Statement-R, 8.5×13.5", Oficio IIR, 11×15"
Metric models: Auto, A3, B4, A4, A4-R, B5, B5R, A5, A5-R, B6, B6-R, A6-R, Folio
Standard
Sizes 2
Select from standard
sizes except Standard
Sizes 1 .
Inch models: A3, B4, A4, A4-R, B5, B5-R, A5,
A5-R, B6, B6-R, A6-R, Folio, 8K, 16 K, 16K-R
Others
Select from Hagaki and
Custom Original Size *.
Hagaki, Oufuku Hagaki, Custom 1 to 4
Size Entry
Enter the size that is not
indicated in Standard
Sizes 1 and 2**.
Inch models
Horizontal: 2 to 17" (in 0.01" increments),
Vertical: 2 to 11.69" (in 0.01" increments)
Metric models: Ledger, Legal, Letter, Letter-R,
Statement, Statement-R, 8.5×13.5", Oficio II-R,
11×15", 8K, 16K, 16K-R
Metric models
Horizontal: 50 to 432 mm (in 1 mm increments),
Vertical: 50 to 297 mm (in 1 mm increments)
*
**
Regarding the setting method of Custom Original Size (Custom 1 to 4), refer to Custom
Original Size Setup on page 8-4.
The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 8-11.
Use the procedure below to select the original size when sending scanned images.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[Original Size].
5-2
Sending Functions
Ready to send.
4
Destination
1
Place original.
Press [Standard Sizes 1], [Standard Sizes 2],
[Others], or [Size Entry] to select original size.
Original Size
Standard
Sizes 1
Place original.
Standard
Sizes 2
Auto
Ledger
Letter
Letter
Legal
Statement
Statement
11x15"
8.5x13.5"
Others
OficioII
Original
Zoom
Paper
: --: 100%
: ---
Size Entry
Preview
Add Shortcut
Cancel
OK
Status
10/10/2008
Ready to send.
10:10
When you have selected [Size Entry], press [+] or
[-] to set the sizes of X (horizontal) and Y (vertical).
By pressing [# Keys], you can use the numeric
keys.
Destination
Place original.
Original Size
Standard
Sizes 1
Place original.
X
(2.00 - 17.00)
"
17
Standard
Sizes 2
# Keys
Others
Original
Zoom
Paper
: --: 100%
: ---
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
(2.00 - 11.69)
"
Y
11
Size Entry
Preview
# Keys
Add Shortcut
Cancel
Status
OK
10/10/2008
10:10
Sending Size Selection
Select the sending size (the size of image to be sent).
The table below lists the sizes.
Item
Detail
Standard
Sizes 1
Select from Same
as Original Size or
Standard Size.
Size
Inch models: Same as Original Size, Ledger,
Legal, Letter, Statement, 8.5×13.5", Oficio II,
11×15"
Metric models: Same as Original Size, A3, B4, A4,
B5, A5, B6, A6, Folio
Standard
Sizes 2
Others
Select from
standard size
except Standard
Sizes 1.
Inch models: A3, B4, A4, B5, A5, B6, A6, Folio,
8K, 16K
Select from
Hagaki.
Hagaki, Oufuku Hagaki
Metric models: Ledger, Legal, Letter, Statement,
8.5×13.5",
Oficio II, 11×15", 8K, 16K
5-3
5
Sending Functions
Relationship between Original Size, Sending Size, and Zoom
Original Size (page 5-2), Sending Size, and Zoom (page 5-5) are related to each other. Refer to the following
table.
Original Size and the size you
wish to send as are
the same
different
Original Size
Specify as
necessary
Specify as
necessary
Sending Size
Select [Same as
Original]
Select the
required size
Zoom
Select [100%]
(or [Auto])
Select [Auto]
NOTE: When you select Sending Size that is different from Original Size, and select the Zoom [100%], you
can send the image as the actual size (No Zoom).
Use the procedure below to select the size for transmission when sending scanned images.
Ready to send.
Destination
1
Press the Send Key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[Sending Size].
4
Press [Standard Sizes 1], [Standard Sizes 2], or
[Others] to select the sending size.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Place original.
Sending Size
Standard
Sizes 1
Place original.
Standard
Sizes 2
Same as
Original Size
Ledger
Letter
Legal
Statement
11x15"
8.5x13.5"
OficioII
Others
Original
Zoom
Paper
: --: 100%
: --Preview
Add Shortcut
Status
Cancel
OK
10/10/2008
10:10
5-4
Sending Functions
Zoom
Scans the original by automatically zooming it depending on the sending size.
The table below lists the available options.
Item
Detail
100%
No Zoom (to be scanned at actual size)
Auto
Zoomed automatically according to the specified sending size.
NOTE: When zooming in or out, see Sending Size Selection on page 5-3 when selecting the sending size.
Depending on the combination of original size and sending size, the image is placed at the edge of the paper.
To center the image vertically and horizontally on the page, use the centering setting described in Centering on
page 5-6.
Use the procedure below to enlarge or reduce the original to match the transmission size.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Select the transmission size.
4
Press [Advanced Setup] and then [Zoom].
5
Press [100%] or [Auto].
6
Press [OK].
7
Specify the destination, and press the Start key to
start sending.
Place original.
Zoom
Place original.
Original
Zoom
Send
: --: 100%
: ---
Enlarge or reduce original when scanning.
[100%]: Scan at actual size.
[Auto]: Enlarge or reduce to match
sending size/storing size.
100%
Auto
Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
5-5
5
Sending Functions
Centering
When you have scanned the original after specifying the original size and sending size, depending on these
sizes, a margin is created at the bottom, left, or right side of paper. By using the centering, the image is placed
with a margin equally created at each of the page Top/Bottom and Left/Right.
Use the procedure below to center then image when sending a scanned image.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Centering].
4
Press [On]. Centering is performed.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
5-6
Sending Functions
Mixed Size Originals
Using the optional document processor, the originals of different sizes can be placed in a batch and sent. In this
operation, up to 30 originals of different sizes can be placed in the document processor at the same time.
Originals of the Same Width
When the original widths are the same, the combinations of originals that can be placed are as follows.
•
Ledger and Letter (A3 and A4)
5
Ledger
•
Letter
Ledger
Legal and Letter-R (Folio and A4-R)
Legal
•
Letter
Letter-R
B4 and B5
5-7
Letter-R
Legal
Sending Functions
Originals of Different Widths (Available for metric models only)
The combinations of originals of different sizes that can be placed together are as follows.
NOTE: When mixing the original sizes as using the following combination: Folio, A4-R, and B5-R, make sure
to set the System Menu key -> Common Settings -> Original / Paper Settings -> Original Auto Detect to [On]
for [Folio]. For more information, refer to Automatic Detection of Originals (Available for metric models only) on
page 8-9.
•
A3, B4, A4, B5
•
B4, A4-R, B5
•
Folio, A4-R, B5-R
5-8
Sending Functions
Use the procedure below to send mixed size originals as a batch.
1
Press the Send key.
2
Place the original into the document processor.
IMPORTANT: When you place originals of different
width, place the top edge of originals to align with the
width guide at the backside. If the originals are placed
unevenly, they may not be scanned correctly.
Ready to send.
Destination
3
Press [Original/Sending Data Format] and then
[Mixed Size Originals].
4
Select the combination of originals from
[Same Width] and [Different Width].
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Place original.
Mixed Size Originals
Place original.
Original
Zoom
Send
: --: 100%
: ---
Scan all sheets in the document processor,
even if differently sized, then send.
*Up to 30 sheets can be placed in
the document processor for mixed
size originals.
Off
Same Width
Different
Width
Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
5-9
5
Sending Functions
1-sided/2-sided Selection
Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Original
Type
Binding
1-sided Sheet Original
1-sided
—
2-sided Sheet Original
2-sided*
Binding Left/Right,
Binding Top
Open Book Original such
as magazine and book
Book
Binding Left,
Binding Right
*
Only when the optional document processor is used.
Use the procedure below to select the original type and binding direction when sending scanned originals.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then [2sided/Book Original].
4
Press [1-sided], [2-sided], or [Book].
5
When selecting [2-sided], select the binding
direction and press [Original Orientation] to select
the direction in which the original is set on the
platen.
When selecting [Book], select the binding direction.
6
Press [OK].
7
Specify the destination, and press the Start key to
start sending.
Place original.
2-sided/Book Original
1-sided
Place original.
2-sided
Left
Right
Book
Original
: ---
Zoom
Send
: 100%
: ---
Top Edge Top
Original
Orientation
Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
5-10
Sending Functions
Original Orientation
To send the document in the orientation that can be read properly, specify the upper orientation of original. To
use the functions below, select the orientation in which the original is set on the platen.
•
2-sided/Book Original
•
Border Erase
*
If [On] is selected as the Orientation Confirmation (page 8-15) setting in the System Menu, the selection
screen for original orientation appears when you select any of the above functions.
When placing the original on the platen
5
Original
[Top Edge Top]
[Top Edge Left]
When placing the original on the optional document processor
Original
[Top Edge Top]
[Top Edge Left]
Use the procedure below to select the orientation when placing the originals on the platen for sending.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[Original Orientation].
5-11
Sending Functions
Ready to send.
Destination
4
Select original orientation from [Top Edge Top] and
[Top Edge Left].
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Place original.
Original Orientation
Select the orientation of the
original document's top edge.
Place original.
Original
: ---
Zoom
Send
: 100%
: ---
Top Edge Top
Top Edge Left
Preview
Add Shortcut
Cancel
OK
08/08/2009
Status
10:10
File Format
Select the file format of the image to send.
The table below lists the file formats and their details.
File Format
Adjustable range of image
quality
Color mode
PDF
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Auto Color (Color/Grayscale), Auto
Color (Color/Black and White), Full
Color, Grayscale, Black and White
TIFF
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Auto Color (Color/Grayscale), Auto
Color (Color/Black and White), Full
Color, Grayscale, Black and White
JPEG
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Auto Color (Color/Grayscale), Full
Color, Grayscale
XPS
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Auto Color (Color/Grayscale), Full
Color, Grayscale
High Comp.
PDF
1 Compression Ratio Priority
to 3 Quality Priority
Auto Color (Color/Grayscale), Auto
Color (Color/Black and White), Full
Color, Grayscale
NOTE: In the color mode, when auto color (color/black and white) is selected, [JPEG] and [XPS] cannot be
specified, and when black and white is selected, [JPEG], [High Comp. PDF], and [XPS] cannot be specified.
When [High Comp. PDF] is specified, you cannot adjust the image quality. In addition, when previewing the color
of the image by selecting [High Comp. PDF], it may differ from the actual color.
You can use PDF encryption functions. For details, refer to the following PDF Encryption Functions.
5-12
Sending Functions
Use the procedure below to select the file format for transmission.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[File Format].
4
Select the file format from [PDF], [TIFF], [JPEG],
[XPS], and [High Comp. PDF].
Place original.
File Format
Image Quality
PDF
Place original.
TIFF
Compression
Ratio Priority
Standard
When the color mode in scanning has been
selected for Grayscale or Full Color, set the image
quality.
Quality
Priority
JPEG
Original
: ---
Zoom
Send
: 100%
: --Preview
If you selected [PDF] or [High Comp. PDF], press
[Encryption] and specify the encryption settings.
XPS
Off
Encryption
High Comp.
PDF
Add Shortcut
Cancel
OK
08/08/2009
Status
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
10:10
File Separation
Create several files by dividing scanned original data page by page, and send the files.
Use the procedure below to split scanned original data into separate files when sending scanned originals.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then
[File Separation].
4
Press [Each Page] to set File Separation.
5
Press [OK].
6
Specify the destination, and press the Start key.
The scanned original is sent after being divided into
files of one page each.
Place original.
File Separation
Create and send a file for each page
of the original that was read.
Place original.
Original
Zoom
Send
: --: 100%
: ---
Off
Each Page
Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
NOTE: Three-digit serial number such as
abc_001.pdf, abc_002.pdf... is attached to the end of
the file name.
5-13
5
Sending Functions
PDF Encryption Functions
If you have selected PDF or High Comp. PDF for file format, you can restrict the access level for displaying,
printing, and editing PDF's by assigning a secure password.
The items you can restrict the access level with are as follows.
Item
Value
Detail
Compatibility
Acrobat 4.0 or later,
Acrobat 5.0 or later
Select the version that is compatible with the PDF file.
Password to
Open
Document
Off, On
Enter the password to open the PDF file
Password to
Edit/Print
Document
Off, On
Enter the password to edit the PDF file
When you have entered the password to edit/print
document, you can specifically limit the operation.
When you send a PDF file, use the procedure below to encrypt the PDF file for transmission.
File Format - Encryption
Compatibility
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format], [File
Format], [PDF] or [High Comp. PDF], and
[Encryption].
4
Press [ ] of Compatibility, select Acrobat 4.0 and
later or Acrobat 5.0 and later.
5
When you enter the password to open the PDF file,
select [On] of Password to Open Document.
6
Press [Password], enter a password (up to 256
characters) and then press [OK].
Acrobat 4.0 and later
Encryption Level: Middle(40-bit)
Password to Open
Document
Password
to Edit/Print
Document
Off
Password
On
Confirmation
Off
Password
On
Confirmation
Detail
Cancel
Status
NOTE: Refer to the Character Entry Method on page
OK
08/08/2009
10:10
Appendix-7 for details on entering characters.
7
Press [Confirmation] and enter the password again
for confirmation. Then press [OK].
8
When you enter the password to edit the PDF file,
select [On] of Password to Edit/Print Document.
9
In the same way as the entry of Password to Open
Document, enter the password to change the PDF
file.
10 Press [Detail].
5-14
Sending Functions
11 Restrict the access level of the PDF file. Press [
]
of Printing Allowed to select the item (the scope of
limit). The item to be displayed differs according to
the version of Acrobat selected in Compatibility in
step 4.
File Format - Detail
Printing Allowed
Not Allowed
Changes Allowed
Not Allowed
Copying of Text/Images/Others
Disable
Enable
Cancel
OK
08/08/2009
Status
10:10
The table below shows the available settings.
5
Item
Detail
Not Allowed
Make the printing of PDF file impossible
Allowed (Low Resolution
only)*
Can print the PDF file only in low resolution
Allowed
Can print the PDF file in original resolution
*
Only displayed when [Acrobat 5.0 and later] is selected in Compatibility.
12 Press [
] of Changes Allowed, and select the
item (the scope of limit). The item to be displayed
differs according to the version of Acrobat selected
in Compatibility in step 4.
The table below shows the available settings.
Item
Detail
Not Allowed
Cannot change the PDF file
Commenting
Can only add commenting
Inserting/Deleting/
Rotating Pages*
Can only insert, delete, and rotate the pages of the
PDF file
Page Layout except
extracting Pages**
Can change the page layout except extracting the
pages of the PDF file
Any except extracting
Pages
Can conduct all operations except extracting the pages
of the PDF file
*
**
Only displayed when [Acrobat 5.0 and later] is selected in Compatibility.
Only displayed when [Acrobat 4.0 and later] is selected in Compatibility.
13 From Copying of Text/Images/Others, select
[Disable] or [Enable].
5-15
Sending Functions
The table below shows the available settings.
Item
Detail
Disable
Prohibit the copying of text and objects on the PDF file.
Enable
Can copy text and objects on the PDF file.
14 Press [OK] three times to return to Original/
Sending Data Format.
15 Specify the destination, and press the Start key to
start sending.
Image Quality
Select image quality suitable to the type of original.
The table below shows the quality options.
Item
Detail
Text+Photo
Text and photos together.
Photo
For photos taken with a camera.
Text
Only text, no photos.
for OCR
For documents to be read by OCR.*
*
This function is only available for black and white mode.
Use the procedure below to select the quality when sending scanned originals.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Original
Image].
4
Select the original image.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Place original.
Original Image
Select original image
type for best results.
[for OCR]: For documents to be read by OCR.
Place original.
Text+Photo
Original
: ---
Zoom
Send
: 100%
: ---
Photo
Text
for OCR
Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
5-16
Sending Functions
Adjusting Density
Use the procedure below to adjust the density when scanning the originals.
The table below shows the available settings.
Item
Detail
Manual
Adjust density using 7 or 13 levels.
Auto
Optimum density is selected according to the density of the original.
The procedure for adjusting the density is explained below.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Density].
4
When selecting manual density adjustment, press
[-3] to [+3] (Lighter - Darker) to adjust density.
Place original.
Density
When selecting auto density adjustment, press
[Auto].
Auto
Place original.
Lighter
Normal
-3
Original
: ---
Zoom
Send
: 100%
: ---
-1
-2
-2.5
-1.5
Darker
0
-0.5
+1
+0.5
+2
+1.5
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
+3
+2.5
Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
5-17
5
Sending Functions
Scan Resolution
Select the fineness of scanning resolution. The finer the scanning becomes (the larger the number becomes),
the better the image quality becomes. However, better resolution also results in larger file size (file capacity) and
longer scanning and sending times. The selectable resolution is 200x100dpi Normal, 200x200dpi Fine,
200x400dpi Super Fine, 300x300dpi, 400x400dpi Ultra Fine, or 600x600dpi.
The procedure for adjusting the scanning resolution when sending a scanned image is explained below.
Ready to send.
Destination
1
Place original.
Scan Resolution
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Scan
Resolution].
4
Select the resolution.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Select fineness of scanning resolution.
The larger the number, the better the
image resolution.
Place original.
Original
Zoom
Send
Preview
Add Shortcut
Status
600x600dpi
400x400dpi
Ultra Fine
300x300dpi
200x400dpi
Super Fine
200x200dpi
Fine
200x100dpi
Normal
: --: 100%
: ---
Cancel
OK
08/08/2009
10:10
5-18
Sending Functions
Sharpness
Select the sharpness of the image outline.
The table below shows the available settings.
Item
Detail
Sharpen
Emphasize the image outline. Make letters and
lines appear sharper.
Unsharpen
Blur the image outline. Can weaken a Moire
effect (grids appearing as wavelike patterns
when scanning printed photos).
Use the procedure below to set the sharpness when sending scanned images.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Sharpness].
4
Press [-3] to [+3] (Unsharpen - Sharpen) to adjust
the sharpness.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Place original.
Sharpness
Place original.
Unsharpen
-3
Original
Zoom
Send
Sharpen
-2
-1
0
+1
+2
+3
: --: 100%
: --Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
5-19
5
Sending Functions
Background Density Adjustment
Lightens the background of the colored original when it is too dark.
NOTE: You cannot adjust the background density if you selected [Black & White] in Color / Grayscale / Black
and White Selection (see page 5-21).
Use the procedure below to set the background density when sending scanned images.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Background
Density Adj.].
4
Press [On], and press [1] to [5] (Lighter - Darker) to
adjust the background density.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Place original.
Background Density Adj.
Off
Background
Lighter
Place original.
1
Original
Zoom
Send
Darker
On
2
3
4
5
: --: 100%
: --Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
5-20
Sending Functions
Color / Grayscale / Black and White Selection
This feature allows you to select the color mode used for scanning when sending images. You can select from
Auto (Color/Gray), Auto (Color/B & W), Full Color, Grayscale or Black & White.
Use the procedure below to select the color mode when sending scanned images.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then [Color
Selection].
4
Select the color mode to be used for scanning.
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
Place original.
Color Selection
Select scanning color.
Select [Auto Color] to automatically send color originals
in full color and black & white originals in black & white.
Place original.
Original
Zoom
Send
Auto Color
(Color/Gray)
Auto Color
(Color/B & W)
Full Color
Grayscale
: --: 100%
: --Black & White
Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
5-21
5
Sending Functions
Continuous Scan
When the multi-page originals cannot be placed in the document processor at one time, the originals can be
scanned in separate batches and then sent as one job. With this function, originals can be scanned one after
another until you press [Scan Finish].
Any of the following settings can be changed during scanning.
•
Original Size selection
•
Original Orientation
•
1-sided / 2-sided selection
•
Scan density
•
Image quality
•
Scan resolution
•
Color selection
•
Sending Size selection
•
Zoom
•
Border Erase
The procedure for using continuous scanning when sending scanned images is explained below.
Ready to send.
Destination
1
Press the Send key.
2
Press [Advanced Setup] and then [Continuous
Scan].
3
Press [On]. Continuous Scan is selected.
4
Press [OK].
5
Specify the destination.
6
Place the original, and press the Start key.
Place original.
Continuous Scan
Place original.
Original
Zoom
Send
: --: 100%
: ---
Scan a large number of originals
in separate batches and then produce
as one job.
*Settings can be changed during scanning.
Off
On
Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
When the scanning is completed, change the
settings as necessary.
7
Place the next original, and press the Start key.
Scan the remaining originals by the same
procedure.
When you have scanned all the originals, press
[Finish Scan] to start sending.
5-22
Sending Functions
Border Erase
Use Border Erase to remove black shadows that appear around the outside of the original when scanning and
sending originals. The following options can be selected.
Border Erase Sheet
Erases black borders around the single sheet original.
Original
5
Copy
Border Erase Book
Erases black borders around the edges and in the
middle of the original such as a thick book. You can
specify the widths individually to erase the borders
around the edges and in the center of the book.
Original
Copy
Individual Border Erase
Specify border erase widths individually for all edges.
Original
Copy
In each option, the available ranges are as below.
Input units
Border Erase Range
Inch models
0 to 2" (in 0.01" increments)
Metric models
0 mm to 50 mm (in 1-mm increments)
5-23
Sending Functions
Border Erase to Back Page
When scanning a 2-sided original, this allows you to erase the borders on the back of the original. The table
below shows the available settings.
Item
Detail
Same as Front
Page
Border Erase performed using the same setting as the
front page
Do Not Erase
No Border Erase performed on the back page
Use the procedure below to erase borders when sending scanned originals.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Border Erase].
4
Press [Border Erase Sheet] to erase borders for an
individual sheet or [Border Erase Book] to erase
borders for a book.
Place original.
Border Erase
Border
Off
(0.00 - 2.00)
0.25
Place original.
Border Erase
Book
Original
Zoom
Paper
"
Use [+] or [-] to enter the width in Border or Gutter.
Press [# Keys] to use the number keys for entry.
Border Erase
Sheet
# Keys
Back Page
(0.00 - 2.00)
Gutter
0.25
Individual
Border Erase
: --: 100%
: ---
Same as
Front Page
"
# Keys
Preview
Add Shortcut
Cancel
OK
Status
10/10/2008
Ready to send.
10:10
Press [Individual Border Erase] to select the
individual border erase.
Destination
Place original.
Border Erase
(0.00 - 2.00)
Off
Top
Place original.
Original
Zoom
Paper
: --: 100%
: --Preview
Add Shortcut
Status
0.25
Use [+] or [-] to enter the border width or press [#
Keys] and enter the width using the numeric keys.
"
Border Erase
Sheet
Bottom
0.25
"
Border Erase
Book
Left
0.25
"
Individual
Border Erase
Right
0.25
Same as
Front Page
Press [Original Orientation] to select the original
orientation from either [Top Edge Top] or [Top Edge
Left], and press [OK].
Back Page
"
Top Edge Top
# Keys
Cancel
Original
Orientation
For 2-sided originals, press [Back Page] and then
press [Same as Front Page] or [Do Not Erase].
OK
10/10/2008
10:10
5
Press [OK].
6
Specify the destination, and press the Start key to
start sending.
5-24
Sending Functions
Enter Document Name/File Name
This setting allows you to assign a document name to scanned images. You can specify a default for the
document name.
Use the procedure below to assign names to scanned documents that you are sending.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [File Name
Entry].
4
Press [File Name].
5
Enter the document name, and press [OK].
Place original.
File Name Entry
Add a file name.
Additional information such as Job No.
and Date and Time can also be set.
File Name
Additional Info
doc
& [ Date and Time
Job No.
Add Shortcut
Status
]
Date and Time
Cancel
OK
08/08/2009
10:10
NOTE: Up to 32 characters can be entered for the
document name.
6
Press [Job No.] to enter the job No., and [Date and
Time] to enter the date and time.
7
Press [OK].
8
Specify the destination, and press the Start key to
start sending.
5-25
5
Sending Functions
Enter E-mail Subject and Body
When sending E-mail, enter the subject and body of the
E-mail.
Use the procedure below to enter the subject and body
for an E-mail message and then send the E-mail.
Ready to send.
Destination
1
Press the Send key.
2
Press [Advanced Setup] and then [E-mail Subject/
Body].
3
Press [Subject].
4
Enter the subject, and press [OK].
1
Place original.
E-mail Subject/Body
Subject
Place original.
Original
Zoom
Send
Body
: --: 100%
: --Preview
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
NOTE: Up to 60 characters can be entered for the
subject.
5
Press [Body].
6
Enter the body and press [OK].
NOTE: Up to 500 characters can be entered for the
body.
7
Press [OK].
8
Specify the destination, and press the Start key to
start sending.
5-26
Sending Functions
WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE: To use WSD Scan, confirm that the computer used for WSD scanning and the machine is networkconnected, and WSD Scan Setup (page 8-76) is set to On in the network settings. For information on operating
the computer, refer to the computer’s help or the operation guide of your software.
Installing Driver Software (for Windows Vista)
1
Click Start and then Network in the computer.
2
Right-click the machine’s icon(Kyocera:Taskalfa
XXX:XXX) and then click Install.
NOTE: If the User Account Control window appears,
click Continue.
If the Found New Hardware window appears, click
Cancel.
3
During the installation, double-click the icon shown
on the task bar to display the Driver Software
Installation screen. When Your devices are
ready to use is displayed on the Driver Software
Installation screen, the installation is completed.
1
Press the Send Key.
Procedure Using this machine
Displays the screen for sending.
NOTE: Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
2
Place the originals in the document processor or on
the platen.
3
Press [WSD Scan].
4
Press [From Operation Panel] and press [Next].
5-27
5
Sending Functions
5
WSD Scan - Selecting Computer
Select the destination computer and press [OK].
Select the destination computer and press [OK].
Press [Reload] to reload the computer list.
Computer Name
Reload
You can view information on the selected computer
by pressing [Detail].
pc00010
pc000102
pc000103
1/1
Detail
pc000104
pc000105
Cancel
Status
Back
OK
08/08/2009
10:10
6
Select the type of originals, file format, etc., as
necessary.
7
Press the Start key. Sending begins and the
software installed on the computer is activated.
1
Press the Send Key.
Procedure Using WSD Scan from Your Computer
The send screen appears.
NOTE: Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
2
Place the originals in the document processor or on
the platen.
3
Press [WSD Scan].
4
Press [From Computer] and press [Execute].
5
Use the software installed on the computer to send
the images.
5-28
Sending Functions
Job Finish Notice
Sends a notice by e-mail when a job is completed.
Use the procedure below to specify the Job Finish Notice settings.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Job Finish
Notice].
4
To select the destination from the address book,
press [Address Book] on the left of the screen and
then press [Address Book] in the next screen.
Place original.
Job Finish Notice
Off
Destination
Address Book
Select the destination to be notified, then press
[OK].
Detail
Address
Entry
Detail
Add Shortcut
You can view information on the notification
destination by pressing [Detail].
Address Book
Cancel
OK
08/08/2009
Status
10:10
5
Specify the destination to send the finish notice,
and press [OK].
NOTE: For the procedure to select the destination
from the Address Book, refer Specifying Destination on
page 3-30.
Ready to send.
Destination
6
To directly enter the address, press [Address Entry]
and then [E-mail Address].
7
Enter the E-mail address, and press [OK].
8
Press [OK].
9
Specify the destination, and press the Start key to
start sending.
Place original.
Job Finish Notice
Off
Address Book
E-mail
Address
Address
Entry
Add Shortcut
Status
Cancel
OK
08/08/2009
10:10
When the sending is completed, the finish notice is
sent to the specified E-mail address.
5-29
5
Sending Functions
Send and Print
When you send originals, this feature allows you to print a copy of the document being sent.
The procedure for using Send and Print is explained below.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Send and Print].
4
Press [On].
5
Press [OK].
6
Specify the destination and press the Start key.
Transmission begins and a copy of the transmitted
document is printed.
Send and Store
When you send originals, this feature allows you to store a copy of the document being sent in a Custom Box.
The procedure for using Send and Store is explained below.
Ready to send.
Destination
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Advanced Setup], [
Store].
4
Press [On].
5
Select the Custom Box in which the copy is to be
stored.
], and then [Send and
Place original.
Send and Store
Custom Box
Off
No.
Name
Used Area
On
Add Shortcut
Status
0006
06 BOX001
6%
0007
07 BOX002
4%
0008
08 BOX003
8%
0009
09 BOX004
4%
0010
10 BOX005
2%
Cancel
If a password entry screen for the Custom Box
appears, enter the password.
2/2
You can view information on the selected Custom
Box by pressing [Detail].
Detail
OK
08/08/2009
10:10
6
Press [OK].
7
Specify the destination and press the Start key.
Transmission begins and a copy of the transmitted
document is stored in the specified Custom Box.
5-30
Sending Functions
FTP Encrypted TX
This allows you to encrypt documents when you send them. If you select [On] in this option, you can then select
the encryption method in the basic send screen.
Use the procedure below to scan and send originals as encrypted files.
1
Press the Send Key.
2
Place the originals in the document processor or on
the platen.
3
Press [Advanced Setup], [
Encrypted TX].
4
Press [On].
5
Press [OK].
], and then [FTP
NOTE: Click Advanced -> Secure Protocols in the
COMMAND CENTER. Be sure that SSL of Secure
Protocol Settings is On and one or more effective
encryption are selected in Clientside Settings. For
details, refer to the KYOCERA COMMAND CENTER
Operation Guide.
Color Type
This sets the color type when you send color documents. The table below shows the available settings.
Item
Detail
RGB
–
sRGB
Match the color reproduction space between sRGB compatible systems.
Selecting RGB displays the color profile values set on the machine.
Send - Color Type
1
Press System Menu key.
2
Press [Send] and [Change] of Color Type.
3
Select [RGB] or [sRGB].
4
Press [OK].
Specify the color type to send color images.
RGB
Profile:
RGB FINE 1
sRGB
Cancel
Status
OK
10/10/2008
10:10
5-31
5
Sending Functions
About Color Profiles
The color scanner provides color profiles to adjust color.
NOTE: The color profile data import method varies for every TWAIN/WIA-compliant software. Use the color
profile after carefully reading the manual included with your TWAIN/WIA-complaint software.
Selecting a color profile compatible with this device
1 Select the color profile found in the CD included
with this scanner CD (Product Library) under the
Color Profile folder.
NOTE: Use the indicated color profiles when you
chose RGB in color type.
5-32
6 Document Box
This chapter explains the typical procedure for utilizing Document Box.
•
•
•
•
Using a Custom Box ...........................................................................6-2
Using a Job Box................................................................................6-12
Printing Documents Stored in Removable USB Memory..................6-20
Saving Documents to USB Memory (Scan to USB) .........................6-22
6-1
Document Box
Using a Custom Box
NOTE: In the following explanation, it is assumed that user login administration is enabled. For details on User
Logon privileges, refer to User Privileges on page 3-40.
Creating a New Custom Box
Use the procedure below to create a new box in the user box.
Custom Box.
No.
0001
Name
Owner
SALES
1
Press the Document Box key.
2
Press [Custom Box] and then [Register/Edit Box].
3
Press [Add].
4
Press [Change] for each item, enter the information
and then press [OK].
Used Area
Anonymous
----
Search(Name)
Search(No.)
1/1
Store File
Custom Box
Job Box
Detail
Removable Memory
Status
Register/Edit
Box
Open
FAX Box
08/08/2009
10:10
The table below lists the items to be set.
Item
Detail
Box No
Enter the box number by pressing [-, +] or number keys.
The box number can be from 0001 to 1000. A Custom Box should
have a unique number.
If you enter 0000, the smallest number available will be
automatically assigned.
Box Name
Enter a box name consisting of up to 32 characters.
Refer to the Character Entry Method on Appendix-7 for details on
entering characters.
Box Password
User access to the box can be restricted by specifying a password
to protect the box. Entering a password is not mandatory.
Enter the same password of up to 16 characters in both [Password]
and [Confirm Password].
6-2
Document Box
Item
Detail
Usage Restriction
To preserve the hard disk capacity, the storage capacity for a box
can be restricted.
To enable a capacity restriction enter a value for the storage
capacity of the Custom Box in megabytes by pressing [-, +] or
number keys.
You can enter a limit between 1 and 30,000. (Changes according to
the number of created custom boxes.)
Auto File Deletion
Automatically deletes stored documents after a set period of time.
Press [On] to enable automatic deletion and then use [+] and [-] or
the numeric keys to enter the number of days for which documents
are stored.
You can enter any number between 1 and 31 day(s). To disable
automatic file deletion, press [Off].
Overwrite Setting
Specifies whether or not old stored documents are overwritten when
new documents are stored.
To overwrite old documents, press [Permit].
To retain old documents, press [Prohibit].
Delete after Printed
Automatically delete document from the box once printing is
complete. To delete the document, press [On]. To retain the
document, press [Off].
NOTE: If user login administration is enabled, "Owner"
and "Permission" are also displayed. Refer to Creating
new Custom Boxes when user login administration is
enabled on page 3-41.
5
Check the details you have entered and then press
[Register]. The Custom Box is created.
Setting the document deletion time
Sets the time when documents stored in a custom box are deleted.
The procedure for using Auto File Deletion Time is explained below.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory], [Next]
of Custom Box, [Next] of Default Setting and then
[Change] of Auto File Deletion Time.
6-3
6
Document Box
Document Box/Removable Memory - Auto File Deletion Time
3
Set the time at which the document is deleted by
pressing [+], [-]. Press [# Keys] to enter the time
directly using the numeric keys.
4
Press [OK]. The time for document deletion is set.
Set the time to automatically delete stored documents.
Hour
Minute
21
30
# Keys
# Keys
Cancel
OK
Status
10/10/2008
10:10
Storing Documents
The procedure for storing documents in a custom box is explained below.
Custom Box.
No.
0001
Name
Owner
SALES
1
Press the Document Box key.
2
Place the originals in the document processor or on
the platen.
3
Press [Custom Box], select the box where the
document will be stored and then press [Store File].
4
Select the type of originals, scanning density, etc.,
as necessary.
5
Press the Start key. The original is scanned and the
data is stored in the specified Custom Box.
Used Area
Anonymous
----
Search(Name)
Search(No.)
1/1
Store File
Custom Box
Status
Job Box
Detail
Removable Memory
Register/Edit
Box
Open
FAX Box
08/08/2009
10:10
NOTE: Enter up to 64 characters as the file name.
6-4
Document Box
Printing Documents
The procedure for printing documents in a custom box is explained below.
1
Press the Document Box key.
2
Press [Custom Box], select the box containing the
document you want to print and press [Open].
NOTE: If a custom box is protected by a password,
enter the correct password.
3
Box:
Date and Time
Size
0001
File Name
0404200710574501
10/10/2008 09:40
21 MB
0002
0404200710574511
10/10/2008 09:50
21 MB
0003
0404200710574521
10/10/2008 10:00
21 MB
The document is marked with a checkmark.
Search(Name)
1/1
Select the document you wish to print by checking
the checkbox.
NOTE: To deselect, press the checkbox again and
Detail
remove the checkmark.
Preview
Print
Send
Join
Move/Copy
Delete
Store File
4
Press [Print].
5
Set the paper selection, duplex printing, etc., as
desired.
6
Press the Start key. Printing of the selected
document begins.
Close
Status
08/08/2009
10:10
6-5
6
Document Box
Sending Documents
The procedure for sending documents in a custom box is explained below.
1
Press the Document Box key.
2
Press [Custom Box], select the box containing the
document you want to send and press [Open].
NOTE: If a custom box is protected by a password,
enter the correct password.
3
Box:
Date and Time
Size
0001
File Name
0404200710574501
10/10/2008 09:40
21 MB
0002
0404200710574511
10/10/2008 09:50
21 MB
0003
0404200710574521
10/10/2008 10:00
21 MB
NOTE: You cannot select and send multiple documents.
To deselect, press the checkbox again and remove the
checkmark.
Detail
Preview
Print
Send
Join
Move/Copy
Delete
Store File
4
Close
Status
The document is marked with a checkmark.
Search(Name)
1/1
Select the document you wish to send by checking
the checkbox.
08/08/2009
Press [Send].
10:10
The screen for sending appears.
NOTE: Depending on the settings, the address book
screen may appear.
5
Set the destination.
NOTE: For more information on selecting destinations,
refer to Specifying Destination on page 3-30.
6
6-6
Press the Start key. Sending of the selected
document begins.
Document Box
Form Overlay from Custom Boxes
This function allows you to retrieve images (image files), overlay them into documents stored in custom boxes
and then print the results.
Use the procedure below.
1
Press the Document Box key.
2
Press [Custom Box], select the box containing the
document you want to overlay the image into and
print, and then press [Open].
NOTE: If a custom box is protected by a password,
enter the correct password.
3
Box:
Date and Time
Size
0001
File Name
0404200710574501
10/10/2008 09:40
21 MB
0002
0404200710574511
10/10/2008 09:50
21 MB
0003
0404200710574521
10/10/2008 10:00
21 MB
Select the document you wish to print by checking
the checkbox.
The document is marked with a checkmark.
Search(Name)
1/1
NOTE: To deselect, press the checkbox again and
Detail
remove the checkmark.
Preview
Print
Send
Join
Move/Copy
Delete
Store File
4
Press [Print].
5
Press [Functions], [Form Overlay], [Select Stored
Form], and then [Select Form].
Close
08/08/2009
Status
10:10
Copies
Ready to store in Box.
1
File Name:
Form Overlay
Off
Density
(10 㵨 30, 100)
100
Place original.
Original
: ---
Zoom
Paper
: 100%
: ---
Add Shortcut
NOTE: You can select the form density setting through
4 levels from 10%, 20%, 30% or 100%. Press the [+] or
[-] buttons in Density.
Off
Select
Form
Preview
Status
%
Select
Stored Form
Cancel
OK
10/10/2008
10:10
6
In Form Overlay - Select Form, select the image file
to be overlaid onto the document from the
displayed document boxes.
You can only select one image file.
7
Press [OK].
8
Press [OK] again to return to the Functions screen.
9
Press the Start key. Printing begins.
6-7
6
Document Box
Editing Documents
This function allows you to move or copy documents stored in custom boxes into other boxes or to join multiple
documents together. You can also copy documents to USB memory connected to this machine.
Moving a Document / Copying a Document
The procedure for moving or copying documents is explained below.
1
Press the Document Box key.
2
Press [Custom Box], select the box containing the
document you want to move or copy and press
[Open].
NOTE: If a custom box is protected by a password,
enter the correct password.
3
Box:
Date and Time
Size
0001
File Name
0404200710574501
10/10/2008 09:40
21 MB
0002
0404200710574511
10/10/2008 09:50
21 MB
0003
0404200710574521
10/10/2008 10:00
21 MB
The document is marked with a checkmark.
Search(Name)
1/1
Select the document in the list that you want to
move or copy by pressing the checkbox.
NOTE: To deselect, press the checkbox again and
Detail
remove the checkmark.
Preview
Print
Send
Join
Move/Copy
Delete
Store File
4
Press [Move/Copy].
5
To move the document, press [Move to Custom
Box].
Close
08/08/2009
Status
10:10
Custom Box.
Move/Copy
To copy the document, press [Copy to Custom Box]
or [Copy to Removable Mem.].
Select the required operation and press [Next].
6
Copy to
Custom Box
Move to
Custom Box
Cancel
Status
Copy to
Removable Mem.
Back
Next
08/08/2009
10:10
6-8
Press [Next].
Document Box
7
Job Box.
To copy or move the document to a custom box,
select the destination box.
Move to Custom Box
To copy the document to USB memory, select the
destination folder and press [Next]. If necessary,
set the saved file size and the file format, etc.
Select the destination box and press [Move].
Document
No.
Name
Owner
Used Area
0001
Document1
Administrator
2 MB
0002
Document2
Administrator
3 MB
0003
Document3
Administrator
3 MB
0004
Document4
Administrator
5 MB
Cancel
Back
Up
8
Open
Press [Move] or [Copy] and then press [Yes] in the
confirmation screen. The selected document is
moved or copied.
Move
Status
08/08/2009
10:10
NOTE: If the box to which the document is to be
moved or copied is protected by a password, enter the
correct password.
Joining Documents
6
The procedure for joining documents in a custom box is explained below.
NOTE: You can only join a document to other documents in the same custom box. If necessary, move the
documents to be joined beforehand.
1
Press the Document Box key.
2
Press [Custom Box], select the box containing the
documents you want to join and press [Open].
NOTE: If a custom box is protected by a password,
enter the correct password.
3
Box:
Date and Time
Size
0001
File Name
0404200710574501
10/10/2008 09:40
21 MB
0002
0404200710574511
10/10/2008 09:50
21 MB
0003
0404200710574521
10/10/2008 10:00
21 MB
Select the documents in the list that you wish to join
by pressing the checkbox.
The document is marked with a checkmark.
Search(Name)
You can join up to 10 documents.
1/1
Detail
Print
Send
Join
Move/Copy
Delete
Preview
NOTE: To deselect, press the checkbox again and
Store File
remove the checkmark.
Close
Status
08/08/2009
10:10
4
6-9
Press [Join].
Document Box
5
Join
Confirm the order of documents to combine.
File Name
Date and Time
Highlight the document you want to rearrange and
press [Up] or [Down] to move it to the correct place
in the sequence.
Size
2008101010574501
10/10/2008 09:40
21 MB
2008101010574511
10/10/2008 09:50
21 MB
2008101010574521
10/10/2008 10:10
21 MB
Arrange the documents into the order in which they
are to be joined.
1/1
Up
6
Press [Next].
7
Press [File Name], enter the file name for the joined
document and press [OK].
Down
Cancel
Status
Next
08/08/2009
10:10
NOTE: Enter up to 32 characters as the file name.
8
Press [Join] and then press [Yes] in the
confirmation screen. The documents are joined.
NOTE: After joining, the original documents are left
unchanged. Delete the documents if they are no longer
needed.
6-10
Document Box
Deleting Documents
The procedure for deleting documents in a custom box is explained below.
1
Press the Document Box key.
2
Press [Custom Box], select the box containing the
document you want to delete and press [Open].
NOTE: If a custom box is protected by a password,
enter the correct password.
3
Box:
Date and Time
Size
0001
File Name
0404200710574501
10/10/2008 09:40
21 MB
0002
0404200710574511
10/10/2008 09:50
21 MB
0003
0404200710574521
10/10/2008 10:00
21 MB
NOTE: [Delete] is disabled until a document is
selected.
To deselect, press the checkbox again and remove the
checkmark.
Detail
Preview
Print
Send
Join
Move/Copy
Delete
The document is marked with a checkmark.
Search(Name)
1/1
Select the document you wish to delete by
checking the checkbox.
Store File
Close
Status
08/08/2009
10:10
4
Press [Delete]. The delete confirmation screen
appears.
5
Press [Yes]. The document is deleted.
6-11
6
Document Box
Using a Job Box
Private Print/Stored Job Box
Private Print/Stored Job Box stores the print data which is printed by using the printer driver as a Private Print/
Stored Job.
Refer to the Printer Driver User Guide on how to print a job as Private Print or Stored Job using the printer driver.
Printing a Document in Private Print/Stored Job Box
You can print documents stored in a Private Print/Stored Job box.
Use the procedure below to print a document.
Job Box.
1
Press the Document Box key.
2
Press [Job Box].
3
Select [Private Print/Stored Job] and press [Open].
4
Select the creator of the document to print and
press [Open].
5
Select the document and press [Print].
6
If the document is protected by a password, enter
the password using the numeric keys.
7
Specify the number of copies to print as desired.
8
Press [Start Print] to start printing.
Private Print/Stored Job
User Name
Files
1 User
5
2 User
2
3 User
1
4 User
1
5 User
1
1/2
Open
Close
Status
08/08/2009
10:10
Job Box.
User:
Date and Time
Size
1File
10/10/2008 09:40
21 MB
2File
10/10/2008 09:45
30 MB
3File
10/10/2008 09:50
36 MB
4File
10/10/2008 09:55
21 MB
5File
10/10/2008 10:00
30 MB
File Name
Print
1/1
Detail
Delete
Close
Status
08/08/2009
10:10
Upon completion of printing, the Private Print job is
automatically deleted.
6-12
Document Box
Deleting a Document
You can delete documents stored in a Private Print/Stored Job box.
Use the procedure below to delete a document.
Job Box.
1
Press the Document Box key.
2
Press [Job Box].
3
Select [Private Print/Stored Job] and press [Open].
4
Select the creator of the document and press
[Open].
Private Print/Stored Job
User Name
Files
1 User
5
2 User
2
3 User
1
4 User
1
5 User
1
6
1/2
Open
Close
Status
08/08/2009
10:10
5
Job Box.
To delete the document, select the document and
press [Delete].
User:
Date and Time
Size
1File
10/10/2008 09:40
21 MB
2File
10/10/2008 09:45
30 MB
3File
10/10/2008 09:50
36 MB
4File
10/10/2008 09:55
21 MB
5File
10/10/2008 10:00
30 MB
File Name
Print
When the delete confirmation screen appears,
press [Yes].
If the document is protected by a password, enter
the password using the numeric keys and the
document is deleted.
1/1
Detail
Delete
Close
Status
08/08/2009
10:10
Quick Copy/Proof and Hold Print Box
Quick Copy/Proof and Hold box stores the print data which is printed by using the printer driver as a Quick Copy
or Proof and Hold Print job.
Refer to the Printer Driver User Guide on how to print a job as Quick Copy or Proof and Hold Print job using the
printer driver.
Setting the Number of Stored Jobs
To maintain free space on the hard disk, you can set the maximum number of stored jobs.
Use the procedure below to set the number of stored jobs.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory], [Next]
of Job Box, then [Change] of Quick Copy Job
Retention.
6-13
Document Box
3
Document Box/Removable Memory - Quick Copy Job Retention
Set the maximum number of quick copy/proof print jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any jobs.
You can also enter the number using the numeric
keys.
(0 - 50)
32
Press [+] or [–] to enter the maximum number of
stored jobs. You can enter any number between 0
and 50.
job(s)
NOTE: If you enter a value of 0 (zero), you cannot use
the Repeat Copy function.
Cancel
OK
10/10/2008
Status
10:10
4
Press [OK]. The maximum number of stored jobs is
set.
Printing a Document
You can print documents stored in the Quick Copy/Proof and Hold box.
Use the procedure below to print a document.
Job Box.
1
Press the Document Box key.
2
Press [Job Box].
3
Select [Quick Copy/Proof and Hold] and press
[Open].
4
Select the creator of the document and press
[Open].
5
Select the document to print, and press [Print].
6
Specify the number of prints as desired.
7
Press [Start Print] to start printing.
Quick Copy/Proof and Hold
User Name
Files
1 User
5
2 User
2
3 User
1
4 User
1
5 User
1
1/2
Open
Close
08/08/2009
Status
10:10
Job Box.
User:
Date and Time
Size
1File
10/10/2008 09:40
21 MB
2File
10/10/2008 09:45
30 MB
3File
10/10/2008 09:50
36 MB
4File
10/10/2008 09:55
21 MB
5File
10/10/2008 10:00
30 MB
File Name
Print
1/1
Detail
Delete
Close
Status
08/08/2009
10:10
6-14
Document Box
Deleting a Document
You can delete documents stored in the Quick Copy/Proof and Hold box.
Use the procedure below to delete a document.
Job Box.
1
Press the Document Box key.
2
Press [Job Box], [Quick Copy/Proof and Hold], then
[Open].
3
Select the creator of the document and press
[Open].
Quick Copy/Proof and Hold
User Name
Files
1 User
5
2 User
2
3 User
1
4 User
1
5 User
1
1/2
6
Open
Close
08/08/2009
Status
10:10
4
Job Box.
Select the document to delete and press [Delete].
The delete confirmation screen appears.
User:
Date and Time
Size
1File
10/10/2008 09:40
21 MB
2File
10/10/2008 09:45
30 MB
3File
10/10/2008 09:50
36 MB
4File
10/10/2008 09:55
21 MB
5File
10/10/2008 10:00
30 MB
File Name
Print
1/1
Detail
Delete
Close
Status
08/08/2009
10:10
5
Press [Yes]. The document is deleted.
Repeat Copy Box
Setting the Number of Stored Jobs
To maintain free space on the hard disk, you can set the maximum number of stored jobs.
Use the procedure below to specify the maximum number of stored jobs.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory], [Next]
of Job Box, [Change] of Repeat Copy Job
Retention.
6-15
Document Box
3
Document Box/Removable Memory - Repeat Copy Job Retention
Set the maximum number of repeat copy jobs to retain.
Use [-]/[+] or the numeric keys to enter a number.
*Set this number to 0 to not retain any jobs.
Use the [+] and [–] keys or the numeric keys to
enter the maximum number of stored jobs.
You can enter any number between 0 and 50.
(0 - 50)
32
NOTE: If you enter a value of 0 (zero), no jobs are
job(s)
stored.
4
Cancel
OK
10/10/2008
Status
Press [OK]. The maximum number of stored jobs is
set.
10:10
Printing a Document
You can print the documents stored in the Repeat Copy box.
Use the procedure below to print a document.
Job Box.
1
Press the Document Box key.
2
Press [Job Box].
3
Select [Repeat Copy] box, and press [Open].
4
Select the document to print and press [Print].
5
If the document is protected by a password, enter
the password using the numeric keys.
6
Press [Start Print] to start printing.
Repeat Copy
Name
1010200800101002
Date and Time
10/10/2008 10:00
Size
21 MB
1/1
Detail
Print
Delete
Close
Status
08/08/2009
10:10
The Repeat Copy box job will be deleted when the
main power switch is turned off.
6-16
Document Box
Automatic Delete Setting for Temporary Documents
This setting specifies that documents, such as Private Printing, Quick Copying, or Proof and Hold Printing, saved
temporarily in the job box are automatically deleted after they have been saved for a set time.
The table below shows the available settings.
Item
Detail
Off
Temporary documents are not automatically
deleted. However, the temporary documents will
be deleted when the power is turned off.
1 hour
Documents are deleted after 1 hour.
4 hours
Documents are deleted after 4 hours.
1 day
Documents are deleted after 1 day.
1 week
Documents are deleted after 1 week.
Use the procedure below to set automatic deletion for temporary documents.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory], [Next] of Job Box, then [Change] of Deletion of Job Retention.
3
Select the time for automatic deletion.
To deactivate automatic deletion, press [Off].
4
Press [OK].
NOTE: This function is valid for documents saved after the function is set. Regardless of this function setting,
temporary documents are deleted when the main power switch is turned off.
Form for Form Overlay Box
Storing a Form
You can store forms to be used for the form overlay in the Form for Form Overlay box. You can store a 1-page
form.
Use the procedure below to store a form.
1
Press the Document Box key.
2
Place the original in the document processor or on
the platen.
3
Press [Job Box].
6-17
6
Document Box
Job Box.
4
Select [Form for Form Overlay] and press [Open].
5
Press [Store File].
6
If necessary, select the image quality of original,
scanning density, etc. before the original is
scanned.
7
Press the Start key. The original is scanned and
stored in the Form for Form Overlay box.
Files
Name
Private Print/Stored Job
21
Quick Copy/Proof and Hold
21
Repeat Copy
21
Form for Form Overlay
21
Open
Custom Box
Job Box
Removable Memory
FAX Box
Status
08/08/2009
10:10
Form for Form Overlay
Name
1010200809530900
Date and Time
10/10/2008 09:00
Size
21 MB
1010200800530910
10/10/2008 09:10
30 MB
1010200800530920
10/10/2008 09:20
30 MB
1/1
Detail
Print
Delete
Store File
Close
Status
08/08/2009
10:10
NOTE: For information on using image overlays with a
stored form, see Form Overlay on page 4-22 and Form
Overlay from Custom Boxes on page 6-7.
Deleting a Form Stored
You can delete the form stored in the Form for Form Overlay box.
Use the procedure below to delete a form.
1
Press the Document Box key.
2
Press [Job Box].
3
Select [Form for Form Overlay] and press [Open].
6-18
Document Box
4
Form for Form Overlay
Name
1010200809530900
Date and Time
10/10/2008 09:00
Select the form to delete and press [Delete].
The delete confirmation screen appears.
Size
21 MB
1010200800530910
10/10/2008 09:10
30 MB
1010200800530920
10/10/2008 09:20
30 MB
1/1
Detail
Print
Delete
Store File
Close
Status
08/08/2009
10:10
5
Press [Yes]. The form is deleted.
6
6-19
Document Box
Printing Documents Stored in Removable USB Memory
Plugging USB memory directly into the machine enables you to quickly and easily print the files stored in the
USB memory without having to use a computer.
Limitations
•
The following file types can be printed:
• PDF file (Version 1.5)
• TIFF file (TIFF V6/TTN2 format)
• JPEG file
• XPS file
• Encrypted PDF file
•
PDF files you wish to print should have an extension (.pdf).
•
Files to be printed should be saved no further down than the top 3 folder levels.
•
Use USB memory properly formatted by this machine.
•
Plug the USB memory directly into the USB memory slot (A1). We do not guarantee that USB memory
printing is error free if a USB hub is used.
Printing
Print documents stored in the removable USB memory.
1
Plug the USB memory into the USB memory slot
(A1).
IMPORTANT: Use USB memory formatted by this
machine. If a USB memory formatted by any other
device is used, The removable memory is not
formatted. may appear. To format a USB memory,
press [Format] and follow the instructions on the screen.
2
When the machine reads the USB memory,
Removable Memory is recognized. Displaying files.
may appear. Press [Yes] to display the removable
memory screen.
NOTE: If the message does not appear, press the
Document Box key and then [Removable Memory].
3
Select the folder containing the file to be printed
and press [Open].
The machine will display documents in the top 3
folder levels, including the root folder.
NOTE: To return to a higher level folder, press [Up].
6-20
Document Box
Removable Memory.
4
Select the file to be printed and press [Print].
5
Change the number of copies, duplex printing, etc.
as desired.
6
Press the Start key. Printing of the selected file
begins.
Removable Memory
Name
Date and Time
Size
1 Document
10/10/2008 09:30
1 MB
2 Document
10/10/2008 09:40
3 MB
3 Document
10/10/2008 09:50
4 MB
4 Document
10/10/2008 10:00
1 MB
Memory
Information
2 MB
Remove
Memory
Up
5 Document
10/10/2008 10:05
Delete
Print
Custom Box
Job Box
Detail
Removable Memory
001/999
Open
Store File
FAX Box
08/08/2009
Status
10:10
Removing USB Memory
Remove the USB memory.
IMPORTANT: Be sure to follow the proper procedure to avoid damaging the data or USB memory.
Removable Memory.
1
Press the Document Box key.
2
Press [Removable Memory].
3
Press [Remove Memory].
4
Remove the USB memory after Removable
Memory can be safely removed. is displayed.
Removable Memory
Name
Date and Time
Size
1 Document
10/10/2008 09:30
1 MB
2 Document
10/10/2008 09:40
3 MB
3 Document
10/10/2008 09:50
4 MB
4 Document
10/10/2008 10:00
1 MB
Memory
Information
10/10/2008 10:05
2 MB
Remove
Memory
Up
5 Document
Delete
Print
Custom Box
Status
Job Box
Detail
Removable Memory
Open
001/999
Store File
FAX Box
08/08/2009
10:10
6-21
6
Document Box
Saving Documents to USB Memory (Scan to USB)
This function allows you to store scanned image files in USB memory connected to the machine. You can store
files in PDF, TIFF, JPEG, XPS or high-compression PDF format.
NOTE: The maximum number of the storable files is 100.
Storing Documents
The procedure for storing documents in removable USB memory is explained below.
1
Plug the USB memory into the USB memory slot
(A1).
IMPORTANT: Use only USB memory that has been
formatted on this machine. If USB memory formatted on
another device is used, The removable memory is not
formatted message may appear. To format the USB
memory, press [Format].
2
When the machine reads the USB memory,
Removable Memory is recognized. Displaying files.
may appear. Press [Yes] to display the removable
memory screen.
NOTE: If the message does not appear, press the
Document Box key and then [Removable Memory].
3
Select the folder where the file will be stored and
press [Open].
The machine will display the top 3 folder levels,
including the root folder.
Removable Memory.
4
Press [Store File].
5
Set the type of original, file format, etc., as desired.
6
Press the Start key. The original is scanned and the
data is stored in the USB memory.
Removable Memory
Name
Date and Time
Size
1 Document
10/10/2008 09:30
1 MB
2 Document
10/10/2008 09:40
3 MB
3 Document
10/10/2008 09:50
4 MB
4 Document
10/10/2008 10:00
1 MB
Memory
Information
2 MB
Remove
Memory
Up
5 Document
10/10/2008 10:05
Delete
Print
Custom Box
Status
Job Box
Detail
Removable Memory
Open
001/999
Store File
FAX Box
08/08/2009
10:10
6-22
7 Status / Job Cancel
This chapter explains how to check the status and history of jobs and cancel the jobs being
processed or waiting to be printed.
This chapter also explains how to check the remaining amount of toner and paper and the
status of devices, and how to cancel the fax communication.
•
•
•
•
•
•
•
•
•
Checking Job Status ...........................................................................7-2
Checking Job History ..........................................................................7-9
Sending the Log History....................................................................7-11
Pause and Resumption of Jobs ........................................................7-13
Canceling of Jobs .............................................................................7-13
Priority Override for Waiting Jobs .....................................................7-14
Reordering Print Jobs .......................................................................7-14
Checking the Remaining Amount of Toner and Paper......................7-15
Device/Communication .....................................................................7-16
7-1
Status / Job Cancel
Checking Job Status
Check the status of jobs being processed or waiting to be printed.
Available Status Screens
The processing and waiting statuses of jobs are displayed as a list on the touch panel in four different screens
- Printing Jobs, Sending Jobs, Sending Jobs - Timer waiting, and Storing Jobs. The following job statuses are
available.
Screen
Job statuses to be displayed
Printing Jobs
•
•
•
•
•
•
•
•
Copy
Printer
FAX reception
i-FAX reception
E-mail reception
Printing from Document Box
Job Report /List
Printing data from removable memory
Sending Jobs
•
•
•
•
•
•
•
FAX transmission
i-FAX transmission
PC (SMB/FTP) transmission
E-mail
Application
Multiple destination
Sending Job FAX using Delayed transmission
Storing Jobs
•
•
•
•
•
•
Scan
FAX
i-FAX
Printer
Join Box Document
Copy Box Document
Displaying Status Screens
Use the procedure below to display the Status screen.
Status
Status
Job Type
Job No.
438
1
Press the Status/Job Cancel key.
2
The Status screen appears. Press either of
[Printing Jobs], [Sending Jobs], or [Storing Jobs] to
check the status.
Log
Scheduled Job
All
Accepted Time Type
14:47
Job Name
User Name
Status
InProcess
abc@def.com
To check the scheduled transmission job, press
[Sending Jobs] and then [Scheduled Job].
1/1
For an explanation of the screen, refer to Details of
the Status Screens on page 7-3.
Detail
Cancel
Printing Jobs
Status
Sending Jobs
Storing Jobs
Device/
Communication
Paper/Supplies
10/10/2008
10:10
7-2
Status / Job Cancel
Details of the Status Screens
The items and keys displayed on the status screens are as follows.
For information on how to display the Status screen, see Displaying Status Screens on page 7-2.
Printing Jobs Status Screen
Status
Status
Job Type
Job No.
Log
7
All
End Date
Type
Job Name
000001 10/10 09:50
doc10102008095050
000002 10/10 09:55
000003 10/10 10:00
1
2
Printing Jobs
Result
InProcess
doc10102008095510
AAAAA
Waiting
doc10102008091000
AAAAA
Waiting
5
6
3
8
Pause All
Print Jobs
User Name
AAAAA
4
9
10
Priority
Override
Cancel
Sending Jobs
Storing Jobs
11
Move Up
1/1
12
Detail
Device/
Communication
Paper/Supplies
10/10/2008
Status
10:10
The table below lists the items displayed in the Printing Jobs Status screen.
No.
Item / Key
Detail
1
Job No.
Acceptance No. of job
2
Accepted Time
Accepted Time of job
3
Type
Icons that indicate the job type
Copy job
Printer job
FAX reception
i-FAX reception
E-mail reception
Job from Document Box
Report / List
Data from Removable Memory
4
Job Name
Job Name or file name
5
User Name
User Name for the executed job
6
Status
Status of job
InProcess:
Printing:
Waiting:
Pause:
Canceling:
The status before starting to print.
Printing
Print Waiting
Pausing print job or error
Canceling the job
7-3
7
Status / Job Cancel
No.
Item / Key
] of Job Type
Detail
7
[
Sorts by specific type of job
8
[Pause All Print Jobs]
Pauses all the printing jobs. By pressing this key again, the printing
jobs will be resumed.
9
[Cancel]
Select the job to be canceled from the list, and press this key.
10
[Priority Override]
Select the job to be overridden, and press this key.
(Refer to Priority Override for Waiting Jobs on page 7-14)
11
[Move Up]
In the list, select the job that you want to move up the job queue and
press this key.
(Refer to Reordering Print Jobs on page 7-14)
12
[Detail]
Select the job for displaying detailed information from the list, and
press this key. (Refer to Checking the Detailed Information of
Histories on page 7-10)
7-4
Status / Job Cancel
Sending Jobs Status screen
Status
Status
Job Type
Job No.
Accepted Time Type
438
14:47
1
2
Log
Scheduled Job
7
All
Job Name
User Name
Status
InProcess
abc@def.com
3
4
5
6
1/1
8
9
Detail
Cancel
Printing Jobs
Sending Jobs
Storing Jobs
Device/
Communication
Paper/Supplies
10/10/2008
Status
10:10
The table below lists the items displayed in the Sending Jobs Status screen.
No.
Item / Key
Detail
1
Job No.
Acceptance No. of job
2
Accepted Time
Accepted Time of job
3
Type
Icons that indicate the job type
Sending Job FAX
Sending Job i-FAX
Sending Job PC (SMB/FTP)
Sending Job E-mail
Sending Job Application
Sending Job Multiple
4
Destination
Destination (Either destination name, FAX number, E-mail address,
or server name)
5
User Name
User Name for the executed job
6
Status
Status of job
InProcess: The status before starting sending such as during
scanning originals
Sending:
Sending
Waiting:
Sending Waiting
Canceling: Canceling the job
Pause:
Pausing the job
7
[
Only selected type of jobs is displayed.
8
[Cancel]
Select the job you want to cancel from the list, and press this key.
9
[Detail]
Select the job whose detailed information you want to display from
the list, and press this key. (Refer to Checking the Detailed
Information of Histories on page 7-10)
] of Job Type
7-5
7
Status / Job Cancel
Storing Jobs Status screen
Status
Status
Job No.
Log
7
All
Job Type
Accepted Time Type
438
14:47
1
2
Job Name
User Name
Status
doc20070225144758
3
4
InProcess
5
6
1/1
8
9
Detail
Cancel
Printing Jobs
Sending Jobs
Storing Jobs
Device/
Communication
Paper/Supplies
10/10/2008
Status
10:10
The table below lists the items displayed in the Storing Jobs Status screen.
No.
Display / Key
Details
1
Job No.
Acceptance No. of job
2
Accepted Time
Accepted Time of job
3
Type
Icons that indicate the job type
Storing Job Scan
Storing Job Printer
Storing Job FAX
Storing Job i-FAX
Join Box Document
Copy Box Document
4
Job Name
Job name or file name is displayed.
5
User Name
User Name for the executed job
6
Status
Status of job
InProcess: The status before starting to save such as during
scanning originals
Storing:
Storing Data
Canceling: Canceling the job
Pause:
Pausing the job
7
[
Only selected type of jobs is displayed.
8
[Cancel]
Select the job you want to cancel from the list, and press this key.
9
[Detail]
Select the job whose detailed information you want to display from
the list, and press this key. (Refer to Checking the Detailed
Information of Histories on page 7-10)
] of Job Type
7-6
Status / Job Cancel
Checking the Detailed Information of Jobs
Check the detailed information of each job.
Use the procedure below to check a job's information.
1
Press the Status/Job Cancel key.
2
Press [Printing Jobs], [Sending Jobs], or [Storing
Jobs].
To check the scheduled transmission, press
[Sending Jobs] and then [Scheduled Job].
3
Status
Status
Job Type
Job No.
Log
Scheduled Job
Select the job whose details you wish to check from
the list, and press [Detail].
All
Accepted Time Type
438
14:47
Job Name
User Name
Detailed information of the selected job is
displayed.
Status
InProcess
abc@def.com
1/1
7
Detail
Cancel
Printing Jobs
Sending Jobs
Storing Jobs
Device/
Communication
Paper/Supplies
10/10/2008
Status
Detail Job No.:
10:10
Use [ ] or [
information.
000080
Job No.:
Status/Destination:
000080
Processing
Job Type:
Destination:
Sending Job - E-mail
Detail
] to see the next or previous page of
ABCDE
User Name:
User1
Job Name:
doc20070404115151
Accepted Time:
1/2
10:10:10
Close
10/10/2008
Status
Detail Job No.:
10:10
In Sending Jobs, you can check the destination by
pressing [Detail] in Status/Destination.
000080
Job No.:
Status/Destination:
000080
Processing
Job Type:
Destination:
Sending Job - E-mail
Detail
ABCDE
User Name:
User1
Job Name:
doc20070404115151
Accepted Time:
10:10:10
1/2
Close
Status
10/10/2008
10:10
7-7
Status / Job Cancel
Detail Job No.:
Status/Destination is displayed when address is
selected. Press [Detail] to display the list.
Press [ ] or [ ], select a destination and press
[Detail]. Information on the selected job is displayed for
checking.
000081
Job Type
Type
All
Destination
Status
doc20070404131415
Sending
User01
Waiting
1/2
4
Detail
Close
Status
10/10/2008
10:10
7-8
To exit from the detailed information, press [Close].
Status / Job Cancel
Checking Job History
Check the history of completed jobs.
NOTE: Job history is also available by COMMAND CENTER or KMnet Viewer from the computer.
Available Job History Screens
The job histories are displayed separately in three screens - Printing Jobs, Sending Jobs, and Storing Jobs. The
following job histories are available.
Screen
Job histories to be displayed
Printing Jobs
•
•
•
•
•
•
•
•
Copy
Printer
FAX reception
i-FAX reception
E-mail reception
Printing from Document Box
Job Report / List
Printing data from removable memory
Sending Jobs
•
•
•
•
•
•
FAX
i-FAX
PC (SMB/FTP)
E-mail
Application
Multiple destination
Storing Jobs
•
•
•
•
•
•
Scan
FAX
i-FAX
Printer
Join Box Document
Copy Box Document
Displaying Job History Screen
The procedure for displaying Job History Screen is explained below.
Status
Status
Job Type
Job No.
1
Press the Status/Job Cancel key.
2
Press either of [Printing Jobs], [Sending Jobs], or
[Storing Jobs] to check the log, and press [Log].
Log
All
End Date
Type
Job Name
User Name
Result
000080 01/25 14:14
doc20070225141427
Completed
000081 01/25 14:22
doc20070225142253
Completed
000082 01/25 14:23
doc20070225142310
Completed
000083 01/25 14:24
doc20070225142458
Error
000084 01/25 14:30
doc20070225143034
Completed
001/001
Detail
Printing Jobs
Status
Sending Jobs
Storing Jobs
Device/
Communication
Paper/Supplies
10/10/2008
10:10
7-9
7
Status / Job Cancel
Checking the Detailed Information of Histories
Check the detailed information of each history.
Display of the detailed information of Job Finish history
Use the procedure below to check the job finish history.
Status
Status
Job Type
Job No.
1
Press the Status/Job Cancel key.
2
Press [Printing Jobs], [Sending Jobs] or [Storing
Jobs] and then [Log].
3
Select the job to check details from the list, and
press [Detail].
Log
All
End Date
Type
Job Name
User Name
Result
000080 01/25 14:14
doc20070225141427
Completed
000081 01/25 14:22
doc20070225142253
Completed
000082 01/25 14:23
doc20070225142310
Completed
000083 01/25 14:24
doc20070225142458
Error
000084 01/25 14:30
doc20070225143034
Completed
Detailed information of the selected job is
displayed.
001/001
NOTE: To check the information of the next/previous
page, press [
] or [
].
Detail
Printing Jobs
Status
Sending Jobs
Storing Jobs
Device/
Communication
Paper/Supplies
10/10/2008
10:10
4
7-10
To exit from the detailed information, press [Close].
Status / Job Cancel
Sending the Log History
You can send the log history by e-mail. You can either send it manually as needed or have it sent automatically
whenever a set number of jobs is reached.
Setting the Destination
Set the destination to which log histories are sent.
Use the procedure below to set the destination.
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Log History and
then [Change] of Destination.
3
To enter a new e-mail address, press [E-mail
Address Entry].
Press [E-mail Address], enter the destination email address and then press [OK].
4
To set an address from the address book, press [Email Address Book].
Press [Address Book]. Select the destination from
the address book and press [OK].
NOTE: For information on specifying destinations,
refer to Specifying Destination on page 3-30.
The selected e-mail addresses is displayed.
NOTE: You can view information on the selected
destinations by pressing [Detail].
5
Press [OK].
Automatic Log History Transmission
This function automatically sends the log history to the specified destinations whenever a set number of jobs
has been logged.
Use the procedure below to set automatic log history transmission.
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Log History and
then [Change] of Auto Sending.
7-11
7
Status / Job Cancel
Report - Auto Sending
3
Press [On] and enter the number of jobs in the log
history print by using [+]/[-] or the numeric keys.
You can enter any number between 1 and 1500.
4
Press [OK].
Send job log history to the specified destination after a set number of jobs
have been logged.
Off
Jobs
(1 - 1500)
On
100
Cancel
Status
OK
10/10/2008
10:10
Manual Log History Transmission
You can also send the log history to the specified destinations manually.
Use the procedure below to send the log history manually.
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Log History and
then [Execute] of Send Log History.
When the confirmation screen appears, press
[Yes]. The log history is sent.
Setting E-mail Subject
Set the subject automatically entered when sending log histories by e-mail.
Use the procedure below to set the subject.
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Log History and
then [Change] of Job Log Subject.
3
Enter an e-mail subject not more than 60
characters.
NOTE: Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
4
7-12
Check that the entry is correct and press [OK].
Status / Job Cancel
Pause and Resumption of Jobs
Pause /resume all printing jobs in printing/waiting.
The procedure for pausing and resuming jobs is explained below.
Status
Status
Job Type
Job No.
1
Press the Status/Job Cancel key.
2
Press [Pause All Print Jobs] on the Printing Jobs
Status screen. Printing is paused.
3
When resuming the printing of jobs that have been
paused, press [Resume All Print Jobs].
Log
All
End Date
Type
Job Name
000001 10/10 09:50
doc10102008095050
000002 10/10 09:55
000003 10/10 10:00
Pause All
Print Jobs
Printing Jobs
User Name
Result
AAAAA
InProcess
doc10102008095510
AAAAA
Waiting
doc10102008091000
AAAAA
Waiting
Cancel
Sending Jobs
Priority
Override
Storing Jobs
Status
Move Up
1/1
Detail
Device/
Communication
Paper/Supplies
10/10/2008
10:10
Canceling of Jobs
For more information on canceling jobs, refer to the Canceling Jobs on page 3-42.
7-13
7
Status / Job Cancel
Priority Override for Waiting Jobs
Priority Override function suspends the current job and prints the job in waiting first.
The procedure for using Priority Override is explained below.
Status
Status
Job Type
Job No.
1
Press the Status/Job Cancel key.
2
Press [Printing Jobs].
3
Select the job to be given priority, and press
[Priority Override].
4
Press [Yes] in the confirmation screen. The current
job in printing is suspended, and the job for
override printing starts.
5
When the Priority Override is completed, the
printing job that has been suspended will be
resumed.
Log
All
End Date
Type
Job Name
000001 10/10 09:50
doc10102008095050
000002 10/10 09:55
000003 10/10 10:00
Pause All
Print Jobs
Result
InProcess
doc10102008095510
AAAAA
Waiting
doc10102008091000
AAAAA
Waiting
Priority
Override
Cancel
Printing Jobs
User Name
AAAAA
Sending Jobs
Move Up
Storing Jobs
1/1
Detail
Device/
Communication
Paper/Supplies
10/10/2008
Status
10:10
Reordering Print Jobs
This function allows you to select a queued print job and raise its output priority.
The procedure for reordering print jobs is explained below.
Status
Status
Job Type
Job No.
Press the Status/Cancel key.
2
Press the [Printing Jobs].
3
Select the job to be assigned a higher priority and
press [Move Up].
The priority of the selected job is increased by 1 .
Log
All
End Date
Type
Job Name
User Name
Result
000001 10/10 09:50
doc10102008095050
AAAAA
InProcess
000002 10/10 09:55
doc10102008095510
AAAAA
Waiting
000003 10/10 10:00
doc10102008091000
AAAAA
Waiting
Pause All
Print Jobs
Printing Jobs
Status
1
Cancel
Sending Jobs
Priority
Override
Storing Jobs
Move Up
To further raise the job's priority, press [Move Up]
again. Each time you press [Move Up], the priority
increases by 1.
1/1
Detail
Device/
Communication
Paper/Supplies
10/10/2008
10:10
7-14
Status / Job Cancel
Checking the Remaining Amount of Toner and Paper
Check the remaining amount of toner, paper, and staples on the touch panel.
Use the procedure below to check the remaining amounts.
Status
Toner Information
Toner
Paper
Status
Type
Status
100%
Ledger
Plain
30%
Cyan (C)
30%
100%
Ledger
Plain
Magenta (M)
100%
Letter
Plain
30%
Yellow (Y)
100%
Letter
Plain
30%
Letter
Plain
0%
Printing Jobs
Sending Jobs
Press the Status/Job Cancel key.
2
Press [Paper/Supplies].Check the remaining
amount of toner and the status of a waste toner box
in Toner Information, and the remaining amount of
paper in each paper source in Paper.
Others
Size
Black (K)
Waste Toner OK
1
Storing Jobs
Status
Type
Staple A
Device/
Communication
Status
OK
Paper/Supplies
10/10/2008
10:10
7
The items you can check are described below.
Remaining amount of toner
You can check the remaining amount of each color toner as one of 11 levels from 100 to 0%.
Status of waste toner box
You can check the status of waste toner box.
Paper
You can check the size, orientation, type, and remaining amount of paper in each paper source.The remaining
amount of paper is shown by 11 levels from 100 to 0%, however, the paper in the multi purpose tray is shown
by 2 levels as 100% and 0%.
Others
You can check the status of staples and punch waste box.
NOTE: If the optional document finisher or 3,000 sheet document finisher and punch unit are installed, the
Others section provides the status of the punch waste box and whether or not staples are available.
7-15
Status / Job Cancel
Device/Communication
Configure the devices/lines installed or connected to this machine or check their status. You can also control
devices depending on their status.
Displaying Device/Communication Screen
The procedure for using the Device/Communication screen is explained below.
1
Press the Status/Job Cancel key.
2
Press [Device/Communication].
The screen to check the status or configure the
devices is displayed.
Check of Device Status
Status
Scanner
Hard Disk
Ready.
Overwriting...
Printer
Ready.
Removable Memory
䊜䊝䊥䉦䊷䊄
Not connected.
Format
Remove
FAX Port 2
FAX Port 1
Dialing...
Line Off
FAX
Receiving...
Manual RX
Line Off
i-FAX
Log
Printing Jobs
Status
Sending Jobs
Storing Jobs
Device/
Communication
Check New FAX
Paper/Supplies
10/10/2008
10:10
The items you can check are described below.
Scanner
The status of an original scanning in the document processor (optional) or the error information (paper jam,
opened cover, etc.) is displayed.
Printer
Error information such as paper jam, out of toner, or out of paper, and status such as waiting or printing are
displayed.
Hard Disk
The information such as formatting, overwriting for erasure, and error occurrence is displayed.
7-16
Status / Job Cancel
Configuring the Devices
Status
Scanner
Hard Disk
Ready.
Overwriting...
Printer
Ready.
Removable Memory
䊜䊝䊥䉦䊷䊄
Not connected.
Format
Remove
FAX Port 2
FAX Port 1
Dialing...
Line Off
FAX
Receiving...
Manual RX
Line Off
i-FAX
Log
Printing Jobs
Sending Jobs
Storing Jobs
Device/
Communication
Check New FAX
Paper/Supplies
10/10/2008
Status
10:10
Detailed information on controlling devices is given below.
Removable Memory (USB Memory)
•
The usage and capacity of the external media connected to this machine are displayed.
•
Press [Format] to format external media.
•
Press [Remove] to safely remove the external media. For details, refer to Removing the USB Memory in the
next section.
7
FAX Port 1, FAX Port 2
•
The information such as sending/receiving and dialing is displayed.
•
Press [Line Off] to cancel a fax in sending/receiving. For details, refer to Canceling FAX Communication on
page 7-18 in the section afterwards.
•
Press [Manual RX] to start a fax. Use this function when you want to talk to the sender before receiving the
fax originals. For details, refer to the Operation Guide of FAX kit.
•
Press [Log] to display the fax transmission history. For details, refer to the Operation Guide of FAX kit.
Removing the USB Memory
There is a way to remove the USB memory safely.
Use the procedure below to remove the USB memory.
Status
Scanner
Hard Disk
Ready.
Overwriting...
1
Press the Status/Job Cancel key.
2
Press [Device/Communication] > [Remove] in
Removable Memory.
3
When Removable memory can be safely removed.
is displayed, remove the USB memory.
Printer
Ready.
Removable Memory
䊜䊝䊥䉦䊷䊄
Not connected.
Format
Remove
FAX Port 2
FAX Port 1
Dialing...
Line Off
FAX
Printing Jobs
Status
Receiving...
Manual RX
Line Off
i-FAX
Log
Sending Jobs
Storing Jobs
Device/
Communication
Check New FAX
Paper/Supplies
10/10/2008
10:10
7-17
Status / Job Cancel
Canceling FAX Communication
Cancel fax communication.
Use the procedure below to cancel the fax communication.
Status
Scanner
Hard Disk
Ready.
Overwriting...
1
Press the Status/Job Cancel key.
2
Press [Device/Communication] > [Line Off] in FAX
Port 1 or FAX Port 2.
3
Press [Yes] in the confirmation screen. The line is
disconnected, and the fax communication is
canceled.
Printer
Ready.
Removable Memory
䊜䊝䊥䉦䊷䊄
Not connected.
Format
Remove
FAX Port 2
FAX Port 1
Dialing...
Line Off
FAX
Printing Jobs
Status
Receiving...
Manual RX
Line Off
i-FAX
Log
Sending Jobs
Storing Jobs
Device/
Communication
Check New FAX
Paper/Supplies
10/10/2008
10:10
7-18
8 Default Setting (System Menu)
This chapter explains how to configure various settings of the machine using the menus on
the operation panel.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Common Settings ...............................................................................8-2
Copy Settings....................................................................................8-27
Sending Settings...............................................................................8-30
Document Box Settings ....................................................................8-33
Printer Settings .................................................................................8-35
Printing Reports/Sending Notice.......................................................8-41
Adjustment/Maintenance ..................................................................8-44
Date/Timer ........................................................................................8-55
Editing Destination (Address Book/Adding One Touch Keys)...........8-60
Internet Browser Setup .....................................................................8-67
Applications.......................................................................................8-69
System Initialization ..........................................................................8-72
Restarting the System.......................................................................8-72
Network Setup ..................................................................................8-73
Interface Block Setting ......................................................................8-80
Security Level (Security Level setting)..............................................8-81
Document Guard Setting ..................................................................8-81
Optional Functions ............................................................................8-83
Accessibility Display (Enlarged Touch Panel Display) ......................8-84
8-1
Default Setting (System Menu)
Common Settings
Common settings include;
•
Switching the Language for Display [Language] …8-2
•
Default Screen …8-2
•
Sound …8-3
•
Original/Paper Settings …8-4
•
Switching Unit of Measurement …8-11
•
Error Handling …8-12
•
Paper Output …8-14
•
Orientation Confirmation …8-15
•
Settings for Color Toner Empty Action …8-15
•
Function Defaults …8-15
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Switching the Language for Display [Language]
Select the language displayed on the touch panel.
Use the procedure below to select the language.
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of Language.
3
Press the key for the language you want to use.
4
Press [OK].
The touch panel language will be changed.
Default Screen
Select the screen appearing right after start-up (default screen). The options are as follows.
The table below lists the available screens.
Item
Description
Copy
The Copy screen (the screen shown when the Copy key is pressed)
appears.
Send
The Send screen (the screen shown when the Send key is pressed)
appears.
Status
The Status/Job Cancel screen (the screen shown when the Status/
Job Cancel key is pressed) appears.
8-2
Default Setting (System Menu)
Item
Description
Document Box
The Document Box screen (the screen shown when the Document
Box key is pressed) appears.
Program
The Program screen (the screen shown when the Program key is
pressed) appears.
Application
The Application selecting screen (the screen shown when the
Application key is pressed) appears.
Accessibility Copy
The Accessibility Copy screen (the screen shown when the
Accessibility Display key is pressed in the Copy screen) appears.
Accessibility Send
The Accessibility Send screen (the screen shown when the
Accessibility Display key is pressed in the Send screen) appears.
Application name
(Maximum 6 applications)
For example, Internet Browser
Each application is activated and the initial screen appears.
Use the procedure below to select the default startup screen.
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of Default Screen.
3
Select the screen to be displayed as the default screen.
8
NOTE: The application names appear if the applications are installed and officially licensed on.
4
Press [OK].
Sound
Set options for buzzer sound during the machine operations.
The table below lists the buzzer types and their settings and details.
Item
Value
Description
Volume
0 (Mute), 1 (Minimum) to
5 (Maximum)
Set the buzzer volume level.
Key Confirmation
Off, On
Emit a sound when the control panel
and touch panel keys are pressed.
Job Finish
Off, On
Emit a sound when a print job is
normally completed.
Ready
Off, On
Emit a sound when the warm-up is
completed.
Warning
Off, On
Emit a sound when errors occur.
8-3
Default Setting (System Menu)
Use the procedure below to set the sound options.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Sound and then [Next] of Buzzer.
3
Press [Change] of Volume, Key Confirmation, Job Finish, Ready, or Warning.
4
Select the buzzer volume level, or other sound options.
Original/Paper Settings
Register additional types and sizes of originals and paper.
Custom Original Size Setup
Set up frequently-used custom original sizes. The custom size options are displayed on the screen to select
original size. The dimensions available are as follows.
The table below lists the sizes that can be registered.
Input units
Dimensions
Inch models
X: 2 to 17" (in 0.01" increments)
Y: 2 to 11.69" (in 0.01" increments)
Metric models
X: 50 to 432 mm (in 1 mm increments)
Y: 50 to 297 mm (in 1 mm increments)
Up to four custom original sizes can be added. Use the procedure below to set a custom original size.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings and then [Next] of Custom Original Size.
3
Press [Change] of any one of Custom 1 to Custom 4, on which you wish to register the size.
4
Press [On], and then press [+],[–] or numeric keys to enter X(horizontal) and Y (vertical) dimensions.
5
Press [OK].
6
Move to the copy, send, or document box screen and press the Reset key.
Adding a Custom Size and Media Type for Paper to Print
Set up a maximum of four frequently-used custom paper sizes. The custom size options are displayed on the
screen to select paper set in the multi purpose tray.
The table below lists the sizes that can be registered.
Input units
Dimensions
Inch models
H: 5.83 to 17" (in 0.01" increments)
V: 3.86 to 11.69" (in 0.01" increments)
Metric models
H: 148 to 432 mm (in 1 mm increments)
V: 98 to 297 mm (in 1 mm increments)
8-4
Default Setting (System Menu)
Up to four custom paper sizes can be added.
Select media type for each paper size.
Media type: Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond, Cardstock, Color,
Prepunched, Letterhead, Thick, Envelope, Coated, High Quality, Custom 1-8
NOTE: Refer to Paper Weight on page 8-7 for Custom 1-8 for media type.
Use the procedure below to select a custom paper size and media type.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings and then [Next] of Custom Paper Size.
3
Press [Change] of any one of Custom 1 to Custom 4, on which you want to register the size.
4
Press [On], and then press [+],[–] or numeric keys to enter X (horizontal) and Y (vertical) dimensions.
5
Press [Media Type] to select the type of paper and press [OK] if necessary.
6
Press [OK].
7
Move to the copy or document box screen and press the Reset key.
8
Paper Size and Media Type Setup for Cassettes
Select paper size and media type for Cassette 1, 2 and optional paper feeders (Cassette 3 and 4).
The available paper sizes and media types are shown in the table below.
Item
Paper
Size
Auto
Automatically detect paper size. Select Metric or Inch for paper size.
Standard
Sizes 1
Available options are as follows:
Inch models: Ledger, Legal, Letter, Letter-R, Statement-R, 8.5×13.5", Oficio II
Metric models: A3, B4, A4, A4-R, B5, B5-R, A5-R, Folio
Standard
Sizes 2
Select a standard size except that selected in Standard Sizes 1.
Inch models: A3, B4, A4, A4-R, A5-R, B5, B5-R, Folio, 8K, 16K, 16K-R
Metric models: Ledger, Legal, Letter, Letter-R, Statement-R, 8.5×13.5", Oficio
II, 8K, 16K, 16K-R
Media Type
*
**
Description
Plain (105 g/m2 or less), Rough*, Vellum (64 g/m2 or less), Recycled,
Preprint**, Bond*, Color, Prepunched**, Letterhead**,
Thick (106 g/m2 and more)*, High Quality, Custom 1-8*
To change to a media type other than Plain, refer to Paper Weight on page 8-7. When the paper weight
settings shown below are selected, the media indicated for each setting cannot be selected.
• Rough: Heavy 3
• Bond: Heavy 3
• Thick: Heavy 3 or Extra Heavy
• Custom 1 to 8: Heavy3 or Extra Heavy
To print on preprinted or prepunched paper or on letterhead, refer to Special Paper Action on page 8-10.
8-5
Default Setting (System Menu)
Use the procedure below to select the paper size and media type for each cassette.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings, [Next] of Cassette Setting, [Next] of Cassette
1 to Cassette 4, on which you want to register the size, and then [Change] of Paper Size.
3
To detect paper size automatically, press [Auto] and select Metric or Inch for Paper Size.
To select paper size, press [Standard Sizes 1] or [Standard Sizes 2] for Paper Size.
4
Press [OK]. The previous screen reappears.
5
Press [Change] of Media Type to select media type and press [OK].
Paper Size and Media Type Setup for Multi Purpose Tray
Select size and media type for multi purpose tray. Set up frequently-used size and media type before use.
The available paper sizes and media types are shown in the table below.
Item
Paper
Size
Auto
Automatically detect paper size. Select Metric or Inch for paper size.
Standard
Sizes 1
Available options are as follows:
Inch models: Ledger, Legal, Letter, Letter-R, Statement-R, 8.5×13.5", Oficio II,
Executive
Metric models: A3, B4, A4, A4-R, B5, B5-R, A5-R, B6-R, A6-R, Folio
Standard
Sizes 2
Select a standard size except that selected in Standard Sizes 1.
Inch models: A3, B4, A4, A4-R, B5, B5-R, A5-R, B6-R, A6-R, Folio, 8K, 16K, 16K-R
Metric models: Ledger, Legal, Letter, Letter-R, Statement-R, 8.5×13.5", Oficio II,
Executive, 8K, 16K, 16K-R
Others
Select special standard sizes or custom sizes*.
ISO B5, Envelope #10 (Commercial #10), Envelope #9 (Commercial #9), Envelope
#6 (Commercial #6 3/4), Envelope Monarch, Envelope DL, Envelope C5, Envelope
C4, Hagaki, Oufuku Hagaki, Youkei 4, Youkei 2
Size
Entry
Enter a size not displayed in the standard sizes.
Inch models:
H: 5.83 to 17" (in 0.01" increments)
V: 3.86 to 11.69" (in 0.01" increments)
Metric models:
V: 98 to 297 mm (in 1 mm increments)
H: 148 to 432 mm (in 1 mm increments)
Media Type
*
**
Description
Plain (105 g/m2 or less), Transparency, Rough, Vellum (64 g/m2 or less), Labels,
Recycled, Preprint**, Bond, Cardstock, Color, Prepunched**, Letterhead**,
Envelope, Thick (106 g/m2 and more), Coated, High Quality, Custom 1-8**
Refer to Adding a Custom Size and Media Type for Paper to Print on page 8-4 for selecting Custom 1- 4 for
Custom Paper Size.
Refer to Paper Weight on page 8-7 for selecting Custom 1- 8 from Media Type.
To print on preprinted or prepunched paper or on letterhead, refer to Special Paper Action on page 8-10.
NOTE: To change to a media type other than Plain, refer to Paper Weight on page 8-7
8-6
Default Setting (System Menu)
Use the procedure below to select the paper size and media type for manual paper feed.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings, [Next] of MP Tray Setting and then [Change]
of Paper Size.
3
To detect paper size automatically, press [Auto] and select Metric or Inch for Paper Size.
To select paper size, press [Standard Sizes 1], [Standard Sizes 2], [Others] or [Size Entry] for Paper Size.
If you select [Size Entry], press [+], [–] to enter X (horizontal) and Y (vertical) dimensions.
Press [# Keys] to enter the paper size using the numeric keys.
4
Press [OK]. The previous screen reappears.
5
Press [Change] of Media Type to select the media type and press [OK].
Paper Weight
Select weight for each media type. The options for media type and weight of paper are as follows.
Paper types and weights
Y: Available N: Not available
Paper Weight
Weight (g/m2),
Media type
Light
64 g/m2
or less
8
Normal 1
Normal 2
Normal 3
Heavy 1
Heavy 2
Heavy 3
Extra
Heavy
60 g/m2
to
75 g/m2
76 g/m2
to
90 g/m2
91 g/m2
to
105 g/m2
106 g/m2
to
128 g/m2
129g/m2
to
g/m2
164g/m2
and more
Transparencies
N
Plain
Y
Y
Y (default)
Y*
N
N
N
Transparency
N
N
N
N
Y**
Y**
Y**
Y**
(default)
Rough
Y
Y
Y
Y (default)
Vellum
Y (default)
Y
Y
Y
Y**
Y**
Y**
Labels
Y**
Y**
Y**
Y**
N
N
N
N
N
Y**
Y**
Y**
Y**
(default)
Recycled
Y
Y
Y (default)
Y
N
N
N
N
Preprinted
Y
Y
Y (default)
Y
N
N
N
N
Bond
Y
Y
Y
Y (default)
Y
Y
Y**
N
Cardstock
N
N
N
N
Y**
Y**
Y**
Y**
(default)
Color
Y
Y
Y (default)
Y
N
N
N
N
Prepunched
Y
Y
Y (default)
Y
N
N
N
N
Letterhead
Y
Y
Y (default)
Y
N
N
N
N
8-7
Default Setting (System Menu)
Paper Weight
Light
Normal 1
Normal 2
Normal 3
Thick
N
N
N
N
Envelope
N
N
N
N
Heavy 2
Y
Y (default)
Y**
Y**
Y**
Y**
Y**
Y**
Heavy 3
Extra
Heavy
Heavy 1
(default)
Y**
Coated
Y**
Y**
Y**
Y**
Y**
Y**
Y**
(defaut)
High Quality
Y
Y
Y (default)
Y
N
N
N
N
Custom 1-8
Y
Y
Y (default)
Y
Y
Y
Y**
Y**
*
**
When Normal 3 is selected with the machine that installs the optional document finisher or 3,000 sheet
document finisher, the maximum sheets for stapling becomes 40 sheets for A4 or less sized paper.
The media type cannot be selected for the cassettes.
For Custom 1-8, settings for duplex printing and media type name can be changed.
Item
Duplex
Description
Prohibit
Duplex printing not allowed.
Permit
Duplex printing allowed.
Name
Change names for Custom 1-8. Names should be not more
than 15 characters. Selecting media type at multi purpose
tray, the name after change will be displayed.
Use the procedure below to set the paper weight.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings and then [Next] of Media Type Setting.
3
Press [Next] for the media type whose weight you want to change.
4
Press [Change] of Paper Weight.
5
Select the weight and press [OK].
6
Press [Close].
The previous screen reappears.
7
To change the duplex printing settings for Custom 1 (-8), press [Next] of Custom 1(-8) and then [Change]
of Duplex. Select [Prohibit] or [Permit] and press [OK].
The previous screen reappears.
8
Press [Close].
9
To change the name for Custom 1(-8), press [Next] of Custom 1(-8) and then [Change] of Name. Enter the
name and press [OK].
NOTE: Refer to the Character Entry Method on page Appendix-7 for details on entering characters.
8-8
Default Setting (System Menu)
Default Paper Source
Select the default paper source from Cassette 1-4 and Multi Purpose Tray.
NOTE: [Cassette 3] is displayed when either of the optional paper feeder or 3,000 sheet paper feeder is
installed, and [Cassette 4] is displayed when the optional paper feeder is installed.
Use the procedure below to select the default paper source.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings and then [Change] of Default Paper Source.
3
Select a paper cassette for the default setting.
4
Press [OK].
5
Move to the copy or document box screen and press the Reset key.
Automatic Detection of Originals (Available for metric models only)
Automatically detect originals of special or non-standard size.
The table below lists the special or non-standard original sizes.
Item
Description
A6/Hagaki
As A6 and Hagaki are similar in size, select either one of them for
automatic detection.
Folio
Select Folio for automatic detection.
11x15"
Select the 11×15" size for automatic detection.
Use the procedure below to set automatic detection of originals.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings and then [Change] of Original Auto Detect.
3
Select [A6] or [Hagaki] of A6/Hagaki.
Select [Off] to disable automatic detection or [On] to enable automatic detection of Folio and 11x15"
respectively.
4
Press [OK].
Media for Auto Selection (Color/B&W)
Select a default media type for auto paper selection when [Auto] is selected of Paper Selection. If Plain is
selected, the paper source with plain paper loaded in the specific size is selected. Select [All Media Types] for
the paper source with any kind of paper loaded in the specific size.
NOTE: Default media types can be set for both Color and Black and White.
8-9
8
Default Setting (System Menu)
Use the procedure below to select the paper size and media type used by Auto Selection.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings and then [Change] of Media for Auto (Color)
or Media for Auto (B & W).
3
Select [All Media Types] or any media type for paper selection.
4
Press [OK].
Paper Source for Cover Paper
Select paper source for cover paper from Cassette 1-4 or Multi Purpose Tray. Cover is used for Booklet (see
page 4-18) and Cover (see page 4-21) modes.
NOTE: [Cassette 3] is displayed when either of the optional paper feeder or 3,000 sheet paper feeder is
installed, and [Cassette 4] is displayed when the optional paper feeder is installed.
Use the procedure below to select the paper source for the cover.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings, [
Cover.
3
Select the paper source to load cover paper.
4
Press [OK].
] and then [Change] of Paper Source for
Special Paper Action
When printing on Prepunched, Preprint, and Letterhead, punch-holes might not be aligned or the print direction
might be upside-down depending on how originals are set and the combination of copying functions. In such a
case, select [Adjust Print Direction] to adjust the print direction. When paper orientation is not important, select
[Speed Priority].
The table below lists the available settings and their details.
Item
Description
Adjust Print Direction
Adjust print direction. Print speed is a little slower. Select this item to
print on Prepunched, Preprint and Letterhead.
Speed Priority
Give the job speed top priority and disregard the paper orientation.
Select this item when paper orientation is not important.
8-10
Default Setting (System Menu)
If you select [Adjust Print Direction], load paper according to the steps below.
Example: copying on Letterhead
Original
Paper
Finished
Cassette
Multi Purpose Tray
Original
Paper
Finished
Cassette
Multi Purpose Tray
NOTE: When loading cover paper in a cassette or multi purpose tray, load the face, on which printing is
supposed to be done, upward.
Use the procedure below to specify the actions performed for special paper types.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings, [
Action.
3
Select [Adjust Print Direction] or [Speed Priority].
4
Press [OK].
Switching Unit of Measurement
Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of Measurement.
3
Select [mm] for metric or [inch] for inch.
4
Press [OK].
8-11
] and then [Change] of Special Paper
8
Default Setting (System Menu)
Error Handling
Select whether to cancel or continue the job when error has occurred. The possible errors and what to do for
the errors are as follows.
Duplexing Error
Select what to do when duplex printing is not possible for the selected paper size and media type.
Item
Description
1-sided
Printed in 1-sided
Display Error
Error message to cancel printing is displayed.
Finishing Error
Select alternative actions when finishing (stapling or offsetting) is not available for the selected paper size or
media type.
Processing
Description
Ignore
The setting is ignored and the job is printed.
Display Error
Error message to cancel printing is displayed.
No Staple Error
Select what to do when staples run out during printing.
Item
Description
Ignore
Printing continues without stapling.
Display Error
Error message to cancel printing is displayed.
NOTE: The messages are displayed when the optionaldocument finisher or 3,000 sheet document finisher is
installed.
Stapling Limit Error
Select what to do when stapling capacity is exceeded during printing.
Item
Description
Ignore
Printing continues without stapling.
Display Error
Error message to cancel printing is displayed
NOTE: The messages are displayed when the optionaldocument finisher or 3,000 sheet document finisher is
installed.
8-12
Default Setting (System Menu)
Punch Waste Full Error
Select what to do when the punch waste box becomes full during printing.
Item
Description
Ignore
Printing continues without punching.
Display Error
Error message to cancel printing is displayed.
NOTE: The messages are displayed when the optional 3,000 sheet document finisher and punch unit are
installed.
Paper Mismatch Error
Select what to do when the selected paper size or type does not match paper size or type loaded in the specified
paper source while printing from the computer by specifying the cassette or multi-purpose tray.
Processing
Description
Ignore
The setting is ignored and the job is printed.
Display Error
Error message to cancel printing is displayed.
Use the procedure below to specify the settings for error handling.
1
Press the System Menu key.
2
Press [Common Settings] and then [Next] of Error Handling.
3
Press [Change] at the error you wish to change the handling.
4
Select the error handling method in the selection screen for each of the errors and then press [OK].
5
The previous screen appears. To set the handling for a different error, repeat steps 3 and 4.
8-13
8
Default Setting (System Menu)
Paper Output
Select output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The
options are as follows.
Output Tray
*
Descriptions
Top Tray
Delivery on Top Tray of the machine.
Tray A, Tray B*, Tray C*
Delivery to trays A to C in the optional 3,000 sheet document finisher.
Finisher Tray*
Delivery on Tray set to the optional document finisher.
Job Separator
Delivery on the optional job separator.
Tray 1 to 7*
Delivery to trays 1 to 7 in the optional mailbox (tray 1 is the top tray).
Select [Face Up] (print surface up) or [Face Down] (print surface down) for paper orientation at output.
NOTE: The optional job separator, document finisher, or 3,000 sheet document finisher are required.
FAX RX data output can be specified when the optional fax kit is installed.
Use the procedure below to select the output tray.
1
Press the System Menu key.
2
Press [Common Settings] and then [Next] of Paper Output.
3
Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2.
NOTE: FAX Port 1 appears when the optional fax kit is installed. If you have 2 optional fax kits installed, Fax
Port 2 appears. You can specify the output tray for the second kit (Dual FAX).
4
Select Output Tray.
For [Finisher Tray], [Tray B], [Tray C] or [Tray 1] to [Tray 7], select [Face Up] (print surface up) or [Face
Down] (print surface down) as the paper orientation at output.
5
Press [OK].
6
When selecting [Face Up] (print surface up) as the paper orientation at output, press [Page Order with Face
Up] and then select the order of the output pages from [Ascending] or [Descending].
NOTE: Selecting [Descending] accelerates the starting time of copying.
7
When changing the output tray of Copy/Custom Box, move to the copy or document box screen and press
the Reset key.
8-14
Default Setting (System Menu)
Orientation Confirmation
Select whether to display a screen for selecting the orientation of the originals to be placed on the platen when
using the following functions. (For more information, refer to page 4-9 for Original Orientation.)
•
Duplex
•
Memo mode
•
Margin/Centering originals
•
Page numbering
•
Border erase
•
Booklets
•
Combine mode
•
Staple/Punch (optional feature)
Orientation Confirmation Setting
Use the procedure below to select the default Orientation Confirmation setting.
1
Press the System Menu key.
2
Press [Common Settings] and [Change] of Orientation Confirmation.
3
Select the default for [Off] or [On].
4
Press [OK].
Settings for Color Toner Empty Action
Select whether printing is prohibited or the Print in Black and White setting is used for printing once the color
toner runs out.
Use the procedure below to specify the action performed when there is no color toner.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Stop Printing] or [Print in Black & White].
4
Press [OK].
] and then [Change] of Color Toner Empty Action.
IMPORTANT: You cannot change the setting to black and white printing by selecting [Print in Black & White]
once the color toner runs out. If you want to use [Print in Black & White], specify the action before the color toner
runs out. Once the color toner runs out, the machine continues printing in black and white up to 500 pages in
A4/Letter size.
Function Defaults
Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed.
Set the defaults for available settings such as copying and sending. Setting the frequently-used values as
defaults makes subsequent jobs easier.
IMPORTANT: When you have changed the defaults, to enable the change immediately, move to the copy, send,
or document box screen and press the Reset key.
8-15
8
Default Setting (System Menu)
Original Orientation
Set the original orientation defaults. The available default settings are shown below.
Item
Description
Top Edge Top
Select the original's top edge at the top.
Top Edge Left
Select the original's top edge at the left.
Refer to page 4-9 for Original Orientation.
Use the procedure below to select the default orientation when originals are placed on the platen.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Top Edge Top] or [Top Edge Left] for the default.
4
Press [OK].
], [Next] of Function Defaults and then [Change] of Original Orientation.
Continuous Scan
Set the continuous scan defaults. The available default settings are shown below.
Item
Description
Off
Continuous scan not performed
On
Continuous scan performed
Refer to page 4-9 for Original Orientation.
Use the procedure below to select the default settings for continuous scanning.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Off] or [On] for the default.
], [Next] of Function Defaults and then [Change] of Continuous Scan.
Use the procedure below to select the default quality setting for originals.
4
Press [OK].
8-16
Default Setting (System Menu)
Original Image
Set the default original document type. The available default settings are shown below.
Item
Description
Text+Photo
Text and photos together.
Photo
For photos taken with a camera.
Printed Photo
For photos printed in magazines, etc.
Text
Only text, no photos.
Map
For maps, etc.
for OCR
Image quality suitable for OCR software.*
Printed Document
For documents printed from this machine.
*
This function is only available for black and white mode.
Use the procedure below to select the default quality setting for originals.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default original image.
4
Press [OK].
], [Next] of Function Defaults and then [Change] of Original Image.
Scan Resolution
Select the default scanning resolution. The options are 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi,
200x400dpi Super Fine, 200x200dpi Fine, 200x100dpi Normal.
Use the procedure below to select the default resolution setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default resolution.
4
Press [OK].
], [Next] of Function Defaults and then [Change] of Scan Resolution.
Color Selection (Copy)
Select the default copying color mode setting. The available default settings are shown below.
Color mode
Description
Auto Color
Automatically recognize whether documents are color or black
and white.
Full Color
Scan document in full color.
Black & White
Scan document in black and white.
8-17
8
Default Setting (System Menu)
Use the procedure below to select the default color mode setting.
1
Press the System Menu key.
2
Press [Common Settings], [
Selection(Copy).
3
Select the default color setting.
4
Press [OK].
], [Next] of Function Defaults and then [Change] of mode Color
Color Selection (Send/Store)
Select the default color mode for scanning documents. The available default settings are shown below.
Color mode
Description
Auto Color (Color/Gray)
Automatically recognize whether the document is color or black
and white, and scan color documents in Full Color and black and
white documents in Grayscale.
Auto Color (Color/B & W)
Automatically recognize whether the document is color or black
and white, and scan color documents in Full Color and black and
white documents in Black and White.
Full Color
Scan document in full color.
Grayscale
Scan document in grayscale for smoother and finer finish.
Black & White
Scan document in black and white. File size is smaller than Full
Color or Grayscale.
Use the procedure below to select the default color mode.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default color mode.
4
Press [OK].
], [Next] of Function Defaults and then [Change] of Color Select.(Send/Store).
File Format
Select the default file type to send the scanned originals. The available default settings are shown below.
Item
Description
PDF
Send files in PDF format.
TIFF
Send files in TIFF format.
JPEG
Send files in JPEG format.
XPS
Send files in XPS format.
High Comp. PDF
Send files in High Comp. PDF format (refer to page 5-14).
NOTE: Refer to page 5-12 for file formats.
8-18
Default Setting (System Menu)
Use the procedure below to select the default file format.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default file format.
4
Press [OK].
], [Next] of Function Defaults and then [Change] of File Format.
File Separation
Select the default file separation setting. The available default settings are shown below.
Item
Description
Off
No file separation performed (all the pages are compiled in one file).
Each Page
Each scanned page is created into a separate file.
NOTE: Refer to page 5-13 for file separation.
Use the procedure below to select the default file separation.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default for [Off] or [Each Page].
4
Press [OK].
8
], [Next] of Function Defaults and then [Change] of File Separation.
Density
Set the default density. The available default settings are shown below.
Item
Description
Manual (Normal 0)
Set to (Normal 0) in the Manual density.
Auto
Set to Auto density.
NOTE: You cannot specify the density if you have selected [Full Color], [Auto Color (Color/Gray)], or
[Grayscale] in Color Select.(Send/Store).
Use the procedure below to select the default density.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default density.
4
Press [OK].
], [Next] of Function Defaults, [
8-19
] and then [Change] of Density.
Default Setting (System Menu)
Zoom
Select the enlarged/reduced default when paper size/sending size changed after the originals set. The available
default settings are shown below.
Item
Description
100%
Copy (send/save) at actual size (100%).
Auto
Automatically reduce or enlarge the originals to match paper size/
sending size.
Use the procedure below to select the default zoom setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default zoom setting.
4
Press [OK].
], [Next] of Function Defaults, [
] and then [Change] of Zoom.
File Name Entry
Set an automatically entered name (default) for jobs. Additional information such as Date and Time and Job No.
can also be set.
NOTE: Refer to page 4-41 and page 5-25 for name entry.
Use the procedure below to set the default file name.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Press [File Name] to enter the file name in not more than 32 characters.
], [Next] of Function Defaults, [
] and then [Change] of File Name Entry.
NOTE: Refer to the Character Entry Method on page Appendix-7 for details on entering characters.
4
Press [OK].
5
Press [Date and Time] to add the date/time to the job, or press [Job No.] to add the job number to the job.
The added information will be displayed in Additional Info.
6
Press [OK].
E-mail Subject/Body
Set the subject and body automatically entered (default subject and body) when sending the scanned originals
by E-mail.
NOTE: Refer to Send as E-mail on page 3-25.
Use the procedure below to set the default e-mail subject and message body.
8-20
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [Common Settings], [
3
Press [Subject] to enter an E-mail subject not more than 60 characters.
], [Next] of Function Defaults, [
], and then [Change] of E-mail Subject/Body.
NOTE: Refer to the Character Entry Method on page Appendix-7 for details on entering characters.
4
Press [OK].
5
Press [Body] to enter an E-mail Body not more than 500 characters.
6
Press [OK].
7
Check that the entries are correct and press [OK].
Border Erase Default
Set the default width to be erased as a border. The table below shows the measurement ranges that can be set.
Input units
Range
Inch
0 to 2" (in 0.01" increments)
Metric
0 mm to 50 mm (in 1 mm increments)
NOTE: Refer to page 4-16 and page 5-23 for Border Erase.
Use the procedure below to set the default border erase width.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Press [+] or [–] for the Border and Gutter width to erase.
], [Next] of Function Defaults, [
] and then [Change] of Border Erase Default.
You can use the numeric keys to enter the number directly.
4
Press [OK].
Border Erase to Back Page
Select the Border Erase Method for Back Page of a sheet. The table below shows the available settings.
Item
Description
Same as Front Page
Border Erase performed in the same setting as the front page
Do Not Erase
No Border Erase performed on the back page
NOTE: Refer to page 4-16 and page 5-23 for Border Erase.
Use the procedure below to specify the border erase setting for the back of the page.
8-21
8
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [Common Settings], [
Page.
3
Press [Same as Front Page] or [Do Not Erase].
4
Press [OK].
], [Next] of Function Defaults, [
] and then [Change] of Border Erase to Back
Margin Default
Set the default margin. The table below shows the measurement ranges that can be set.
Input units
Range
Inch
-0.75 to 0.75" (in 0.01" increments)
Metric
-18 mm to 18 mm (in 1 mm increments)
Use the procedure below to set the default margin width.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Use the [+] or [-] to enter the margin widths for Left/Right and Top/Bottom.
], [Next] of Function Defaults, [
] and then [Change] of Margin Default.
You can use the numeric keys to enter the number directly.
4
Press [OK].
Auto Image Rotation
Select the default Auto Image Rotation setting. The table below shows the available settings.
Item
Description
Off
No Auto Image Rotation performed.
On
Auto Image Rotation performed.
NOTE: Refer to page 4-37 for Auto Image Rotation.
Use the procedure below to set the default Auto Image Rotation settings.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default for [Off] or [On].
4
Press [OK].
], [Next] of Function Defaults, [
8-22
] and then [Change] of Auto Image Rotation.
Default Setting (System Menu)
EcoPrint
Select the EcoPrint default. The table below shows the available settings.
Item
Description
Off
No EcoPrint performed.
On
EcoPrint performed.
NOTE: Refer to page 4-12 for EcoPrint.
Use the procedure below to set the default EcoPrint setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Off] or [On] for the default.
4
Press [OK].
], [Next] of Function Defaults, [
] twice, and then [Change] of EcoPrint.
PDF/TIFF/JPEG Image
8
Select the default PDF/TIFF/JPEG file quality. Five options are available from 1 Low Quality (High Comp.) to 5
High Quality (Low Comp.).
NOTE: Higher quality will make the stored files larger.
Refer to page 5-12 for file formats.
Use the procedure below to select the default file quality setting.
1
Press the System Menu key.
2
Press [Common Settings], [
TIFF/JPEG Image.
3
Select the default image quality from [1] (Low Quality) to [5] (High Quality).
4
Press [OK].
] and [Next] of Function Defaults. Press [
8-23
] twice and then [Change] of PDF/
Default Setting (System Menu)
High Comp. PDF Image
Select the default quality setting for high compressed PDF files.
The table below shows the available settings.
Item
Description
Compression Ratio Priority
Compression Ratio is given priority with smaller file size.
Standard
Standard quality
Quality Priority
Image quality is given priority with larger file size.
Use the procedure below to select the default quality setting for highly compressed PDF files.
1
Press the System Menu key.
2
Press [Common Settings], [
Comp. PDF Image.
3
Select the default for [Compression Ratio Priority], [Standard], or [Quality Priority].
4
Press [OK].
] and [Next] of Function Defaults. Press [
] twice and [Change] of High
Color TIFF Compression Settings
Select the compression method for TIFF images handled on this machine. Use the procedure below to set the
default Color TIFF Compression setting.
1
Press the System Menu key.
2
Press [Common Settings], [
TIFF Compression.
3
Select [TIFF V6] or [TTN2].
4
Press [OK].
] and [Next] of Function Defaults. Press [
] twice and then [Change] of Color
Repeat Copying
Select the Repeat Copy default. The options are as follows. The table below shows the available settings.
Item
Description
Off
No Repeat Copy is performed.
On
Repeat Copy is performed.
NOTE: This setting is not displayed when the optional Data Security Kit is installed or the Repeat Copy job is
set to 0.
Refer to page 4-42 for Repeat Copy.
Use the procedure below to set the default Repeat Copy setting.
8-24
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [Common Settings], [
Copy.
3
Select the default for [Off] or [On].
4
Press [OK].
] and [Next] of Function Defaults. Press [
] twice and [Change] of Repeat
Collate/Offset
Set the defaults for Collate/Offset. The table below shows the available settings.
Item
Collate
Offset
Description
Off
Collate not performed.
On
Collate performed.
Off
Offset not performed.
Each Set
(Each Page)
Offset performed. (If [Off] is selected of Collate, it is
performed [Each Page].)
NOTE: Refer to page 3-14 for Collate/Offset.
8
Use the procedure below to set the default Collate/Offset settings.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the defaults for Collate and Offset respectively.
4
Press [OK].
], [Next] of Function Defaults. Press [
] twice and [Change] of Collate/Offset.
JPEG/TIFF Print
Select the image size (resolution) when printing JPEG or TIFF file. The table below shows the available settings.
Item
Description
Fit to Paper Size
Fit the image size to the selected paper size.
Image Resolution
Print at resolution of the actual image.
Fit to Print Resolution
Fit the image size to the print resolution.
Use the procedure below to set the default JPEG/TIFF Print settings.
1
Press the System Menu key.
2
Press [Common Settings], [
Print.
3
Select the default for [Fit to Paper Size], [Image Resolution], or [Fit to Print Resolution].
4
Press [OK].
], [Next] of Function Defaults. Press [
8-25
] twice and [Change] of JPEG/TIFF
Default Setting (System Menu)
XPS Fit to Page
Reduces or enlarges the image size to fit to the selected paper size when printing XPS file.
Use the procedure below to set the default XPS Fit to Page settings.
1
Press the System Menu key.
2
Press [Common Settings], [
Page.
3
Select [Off] or [On] for the default.
4
Press [OK].
], [Next] of Function Defaults. Press [
8-26
] twice and [Change] of XPS Fit to
Default Setting (System Menu)
Copy Settings
The following settings are available for copying functions.
•
Paper Selection …8-27
•
Auto Paper Selection …8-27
•
Auto % Priority …8-28
•
Reserve Next Priority …8-28
•
Preset Limit …8-29
•
Quick Setup Registration …8-29
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Paper Selection
Set the default paper selection. The table below shows the available settings.
Item
Description
Auto
Automatically select the cassette containing paper in the same size as
originals.
Default Paper Source
Select paper source set by Default Paper Source (refer to page 8-9).
Use the procedure below to set the default paper selection.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Paper Selection.
3
Press [Auto] or [Default Paper Source].
4
Press [OK].
5
Move to the copy screen and press the Reset key.
Auto Paper Selection
If [Auto] is selected for Paper Selection, set the paper size selection method when the zoom changes. The table
below shows the available settings.
Item
Description
Most Suitable Size
Select paper based on the current zoom and the size of the original.
Same as Original Size
Select paper that matches the size of the original, regardless the zoom.
8-27
8
Default Setting (System Menu)
Use the procedure below to specify the action performed for Auto Paper Selection.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Auto Paper Selection.
3
Press [Most Suitable Size] or [Same as Original Size].
4
Press [OK].
5
Move to the copy screen and press the Reset key.
Auto % Priority
When a paper source of different size from the original is selected, select whether automatic zoom (reduce/
zoom) is performed. The table below shows the available settings.
Item
Description
Off
No zoom performed (copied in original size).
On
Automatic zoom performed as appropriate.
Use the procedure below to specify the automatic zoom priority.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Auto % Priority.
3
Select the default for [Off] or [On].
4
Press [OK].
5
Move to the copy screen and press the Reset key.
Reserve Next Priority
Select the operation of the reserve copy and interrupt copy functions and for canceling jobs.
Use the procedure below to select the default Reserve Next Priority setting.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Reserve Next Priority.
3
Select the default for [Off] or [On].
4
Press [OK].
8-28
Default Setting (System Menu)
Preset Limit
Restrict the number of copies that can be made at one time. Options are 1-999 copies.
Use the procedure below to set the limit on the number of copies.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Preset Limit.
3
Press [+] or [–] or use the numeric keys to enter the limit for the number of copies.
4
Press [OK].
Quick Setup Registration
Select the copying functions to be registered for Quick Setup. Six keys of the Quick Setup screen are allocated
to typical functions but can be changed as necessary. Six items from the following options are available.
Paper Selection, Zoom, Staple/Punch, Density, Duplex, Combine, Collate/Offset, Original Image,
Original Size, Original Orientation, Color Selection, Continuous Scan
NOTE: Refer to Quick Setup Screen on page 3-43 for the Quick Setup steps.
Use the procedure below to register the Quick Setup functions.
1
Press the System Menu key.
2
Press [Copy] and [Next] of Quick Setup Registration.
3
Press [Change] of the function to be registered in Quick Setup.
4
Select a key (1-6) allocated on the Quick Setup Registration screen. Press [Off] to delete a key from the
Quick Setup.
5
Press [OK]. If you overwrite the setting, a confirmation screen appears. Press [Yes].
8-29
8
Default Setting (System Menu)
Sending Settings
The sending settings allow you to specify the following sending function options.
•
Quick Setup Registration …8-30
•
Destination Check before Send …8-30
•
Color Type …8-31
•
Entry Check for New Destination …8-31
•
Setting the Default Send Screen …8-32
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Quick Setup Registration
Select the sending functions to be registered for Quick Setup. Six keys of the Quick Setup screen are allocated
to typical functions but can be changed as necessary.
Six items in the following options are available.
Original Size, 2-sided/Book Original, Sending Size, Original Orientation, File Format, Density,
Original Image, Scan Resolution, FAX TX Resolution, Color Selection, Zoom, Continuous Scan
Use the procedure below to register the Quick Setup functions.
1
Press the System Menu key.
2
Press [Send] and [Next] of Quick Setup Registration.
3
Press [Change] of the function to be registered in Quick Setup.
4
Select a key (1-6) allocated on the Quick Setup Registration screen. Press [Off] to delete a key from the
Quick Setup.
5
Press [OK]. If you overwrite the setting, a confirmation screen appears. Press [Yes].
Destination Check before Send
When performing sending jobs, display the confirmation screen of destinations after pressing the Start key.
The table below shows the available settings.
Item
Description
Off
Do not display the confirmation screen of destinations.
On
Display the confirmation screen of destinations.
NOTE: Refer to Confirmation Screen of Destinations on page 3-29 for the Quick Setup steps.
This setting is available with 55/50 ppm model.
8-30
Default Setting (System Menu)
Use the procedure below to set the destination check before send.
1
Press the System Menu key.
2
Press [Send] and then [Change] of Dest. Check before Send.
3
Select [Off] or [On].
4
Press [OK].
Color Type
Set the color type when you send color documents. The table below shows the available settings.
Item
Description
RGB
Send color documents in RGB.
sRGB
Allows you to match the color space for machines that support sRGB.
Selecting RGB displays the color profile values set on the machine.
Use the procedure below to set the color type.
1
Press the System Menu key.
2
Press [Send] and then [Change] of Color Type.
3
Select [RGB] or [sRGB].
4
Press [OK].
8
Entry Check for New Destination
When adding new destination, display the entry check screen to check the entered destination. The table below
shows the available settings.
Item
Description
Off
Do not display the entry check screen.
On
Display the entry check screen.
NOTE: This setting is available with 55/50 ppm model.
Use the procedure below to set entry check for new destination.
1
Press the System Menu key.
2
Press [Send] and then [Change] of Entry Check for New Dest.
3
Select [Off] or [On].
4
Press [OK].
8-31
Default Setting (System Menu)
Setting the Default Send Screen
Use this procedure to set the default screen displayed when you press the Send key.
The table below shows the available settings.
Item
Detail
Destination
Displays the destination screen when the Send key is pressed
(screen for sending).
Address Book
Displays the address book when the Send key is pressed
Use the procedure below to set the default send screen.
1
Press the System Menu key.
2
Press [Send] and then [Change] of Default Screen.
3
Press [Destination] or [Address Book].
4
Press [OK].
8-32
Default Setting (System Menu)
Document Box Settings
The following settings are available for Document Box.
•
Registering / Editing Box …8-33
•
Default Setting …8-33
•
Job Box …8-33
•
Quick Setup Registration …8-33
Registering / Editing Box
Creates a new box, edits a box, or checks details of a box in the custom box, or deletes a box from the custom
box. For details, refer to Using a Custom Box on page 6-2.
Default Setting
Sets the time at which documents in the custom box are automatically deleted.
For details, refer to Setting the document deletion time on page 6-3.
Job Box
The following three operations can be done. For details, refer to each page shown below.
•
Quick Copy/Proof and Hold Print Box (page 6-13)
•
Repeat Copy Box (page 6-15)
•
Deleting a Form Stored (page 6-18)
Quick Setup Registration
Select the Storing in Box, Sending from Box, Printing from Box functions to be registered for Quick Setup. Six
keys of the Quick Setup screen are allocated to typical functions but can be changed as necessary.
The options are as follows.
Store File Quick Setup
Color Selection, Storing Size, Density, 2-sided/Book Original, Resolution, Zoom,
Original Orientation, Original Size, Original Image, Continuous Scan
Print Quick Setup
Paper Selection, Collate/Offset, Staple/Punch, Duplex, Combine, Delete after Printed
Send Quick Setup
Sending Size, FAX TX Resolution, File Format, Delete after Transmitted
8-33
8
Default Setting (System Menu)
Use the procedure below to register the Quick Setup functions.
1
Press the System Menu key.
2
Press [Document Box/Removable Memory] and [Next] of Quick Setup Registration.
3
Press [Next] of Store File, Print, or Send.
4
Press [Change] of the function to be registered in Quick Setup.
5
Select a key (1-6) allocated on the Quick Setup screen. Press [Off] to delete a key from the Quick Setup.
6
Press [OK]. If you overwrite the setting, a confirmation screen appears. Press [Yes].
8-34
Default Setting (System Menu)
Printer Settings
Printing from computers, settings are generally made on the application software screen. However, the following
settings are available for configuring the defaults to customize the machine.
•
Emulation …8-35
•
Color Setting …8-36
•
EcoPrint …8-36
•
Override A4/Letter …8-37
•
Duplex …8-37
•
Copies …8-37
•
Orientation …8-38
•
Form Feed Timeout …8-38
•
LF Action …8-39
•
CR Action …8-39
•
Paper Feed Mode …8-40
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
8
Emulation
Select the emulation for operating this machine by commands oriented to other types of printers.
Selection of emulation
The printer can emulate PCL 6, KPDL and KPDL(Auto).
Use the procedure below to select the emulation.
1
Press the System Menu Key.
2
Press [Printer] > [Change] of Emulation.
3
Select the desired emulation.
NOTE: If you selected [KPDL(Auto)], set Alternative Emulation, too. (Refer to page 8-35)
When you have selected [KPDL] or [KPDL(Auto)], set KPDL Error Report, too. (Refer to page 8-36)
4
Press [OK].
Setting of Alternative Emulation
When you have selected [KPDL(Auto)] as emulation mode, you can switch between KPDL and another
emulation mode (alternative emulation) automatically according to the data to print. The alternative emulation
you can set is [PCL6].
Use the procedure below to select the alternative emulation.
1
Press the System Menu Key.
8-35
Default Setting (System Menu)
2
Press [Printer] > [Change] of Emulation > [KPDL(Auto)] > [Alt Emulation].
3
Select the desired alternative emulation and then press [OK].
4
Press [OK].
Setting of KPDL error report
When an error has occurred during printing in KPDL emulation mode, set whether or not the error report is
output. The default setting is Off (not output).
Use the procedure below to specify the KPDL error report setting.
1
Press the System Menu Key.
2
Press [Printer] > [Change] of Emulation > [KPDL] or [KPDL(Auto)] > [KPDL Error Report].
3
Press [On] or [Off] and then press [OK].
4
Press [OK].
Color Setting
You can choose whether status reports are printed in color or black and white.
Use the procedure below to select the color setting.
1
Press the System Menu key.
2
Press [Printer] and then [Change] of Color Setting.
3
Select [Color] or [Black & White].
4
Press [OK].
EcoPrint
EcoPrint conserves toner when printing. This is recommended for test copies where faded printing is not a
problem.
Use the procedure below to specify the EcoPrint setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of EcoPrint.
3
Press [Off] or [On].
4
Press [OK].
8-36
Default Setting (System Menu)
Override A4/Letter
Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table
below shows the available settings.
Item
Description
On
A4 and Letter are regarded as the same in size. The machine will
use whichever size is in the paper source.
Off
A4 and Letter are not regarded as the same in size.
Use the procedure below to specify the override A4/Letter setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Override A4/Letter.
3
Press [Off] or [On].
4
Press [OK].
Duplex
Select binding orientation for duplex mode. The table below shows the available settings.
Item
Description
1-sided
No duplex mode
2-sided Bind
ShortEdge
Shorter edge bound
2-sided Bind
LongEdge
Longer edge bound
Use the procedure below to select a duplex setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Duplex.
3
Press [1-sided], [2-sided Bind LongEdge], or [2-sided Bind ShortEdge].
4
Press [OK].
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to specify the default number of copies.
8-37
Finish
8
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [Printer] and [Change] of Copies.
3
Press [+],[–] or the numeric keys to set the default number of copies.
4
Press [OK].
Orientation
Set the default orientation, Portrait or Landscape.
Portrait
Landscape
Printer
Printer
Use the procedure below to set the default orientation for printing.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Orientation.
3
Press [Portrait] or [Landscape].
4
Press [OK].
Form Feed Timeout
Receiving print data from the computer, the machine may sometimes wait if there is no information signaling
that the last page does not have any more data to be printed. When the preset timeout passes, the machine
automatically prints paper. The options are between 5 and 495 seconds.
Use the procedure below to set the form feed timeout.
1
Press the System Menu key.
2
Press [Printer], [
3
Press [+] or [–] to set the Form Feed Timeout.
] and [Change] of Form Feed Timeout.
You can set the timeout delay in seconds.
You cannot use the numeric keys to enter this value.
4
Press [OK].
8-38
Default Setting (System Menu)
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH). The table below
shows the available settings.
Item
Description
LF Only
Only line feed performed.
LF and CR
Line feed and character return performed.
Ignore LF
No line feed performed.
Use the procedure below to specify an LF action.
1
Press the System Menu key.
2
Press [Printer], [
3
Press [LF Only], [LF and CR] or [Ignore LF].
4
Press [OK].
] and [Change] of LF Action.
CR Action
8
Set the character return action when the machine receives the character return code (character code 0DH). The
table below shows the available settings.
Item
Description
CR Only
Only character return performed.
LF and CR
Character return and line feed performed.
Ignore CR
No character return performed.
Use the procedure below to specify a CR action.
1
Press the System Menu key.
2
Press [Printer], [
3
Press [CR Only], [LF and CR] or [Ignore CR].
4
Press [OK].
] and [Change] of CR Action.
8-39
Default Setting (System Menu)
Paper Feed Mode
While printing from the computer, select how to feed paper when the paper source and type are specified. The
table below shows the available settings.
Item
Description
Auto
Search the paper source that matches the selected paper size and type.
Fixed
Print on paper loaded in the specified paper source.
Use the procedure below to select the paper feed mode.
1
Press the System Menu key.
2
Press [Printer], [
3
Press [Auto] or [Fixed].
4
Press [OK].
] and [Change] of Paper Feed Mode.
8-40
Default Setting (System Menu)
Printing Reports/Sending Notice
Print reports to check the machine settings and status. Default settings for printing the result reports can also
be configured.
NOTE: If user login administration is enabled, you can only print by logging in with administrator privileges.
Printing Reports
Printable reports are as follows.
Status Page
Check the information including current settings, available memory space, and optional equipment installed.
Status Page
TASKalfa xxxxx
Firmware Version
8
Font List
Check the font samples installed in the machine.
8-41
Default Setting (System Menu)
Network Status Page
Check the information including network interface firmware version, network address and protocol.
Network Status Page
TASKalfa xxxxx
Firmware Version
Service Status Page
More detailed information is available than on the Status Page. Service personnel usually print the service status
pages for maintenance purpose.
Use the procedure below to print a report.
1
Press the System Menu key.
2
Press [Report] and [Next] of Print Report.
3
Press [Print] for the report you want to print. Printing starts.
A confirmation screen appears. Press [Yes].
Send Result Report
Automatically print a report of transmission result when a transmission is complete. The table below shows the
available settings.
Item
Description
Off
No result report printed.
On
Result report automatically printed.
Transmitted images can also be attached to the FAX result report.
Error Only
Result report printed only when a transmission ends in an error. If two or more
destinations are registered, the reports are printed only for the destinations with
the errors. Transmitted images can also be attached to the FAX result report.
1
Press the System Menu key.
2
Press [Report], [Next] of Result Report Setting, [Next] of Send Result Report and then [Change] of E-mail/
Folder.
3
Press [Off], [On], or [Error Only].
4
Press [OK].
8-42
Default Setting (System Menu)
Report for Job Canceled before Sending
Print a send result report when the job is canceled before being sent.
1
Press the System Menu key.
2
Press [Report], [Next] of Result Report Setting, [Next] of Send Result Report and then [Change] of
Canceled before Sending.
3
Press [Off], [On].
4
Press [OK].
8
8-43
Default Setting (System Menu)
Adjustment/Maintenance
Adjust printing quality and conduct machine maintenance.
•
Copy Density Adjustment …8-44
•
Send/Box Density Adjust …8-45
•
Drum Refresh …8-45
•
Correcting Fine Black Lines …8-46
•
System Initialization …8-46
•
Display Brightness …8-46
•
Silent Mode …8-47
•
Auto Color Correction...8-47
•
Color Registration...8-47
•
Color Calibration Cycle...8-50
•
Gray Adjustment...8-51
•
Color Calibration...8-52
•
Developer Refresh...8-53
•
Laser Scanner Cleaning...8-53
•
MP Tray Cleaning...8-53
•
First Print Position...8-54
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Copy Density Adjustment
Adjust copy density. Adjustment can be made in 7 levels both in auto and manual density modes.
Use the procedure below to adjust the copy density.
1
Press the System Menu key.
2
Press [
3
Press [Change] of Auto or of Manual.
4
Press [-3] - [+3] (Lighter-Darker) to adjust density.
5
Press [OK].
], [Adjustment/Maintenance] and then [Next] of Copy Density Adjustment.
8-44
Default Setting (System Menu)
Send/Box Density Adjust
Adjust scan density when sending or storing the data in Document Box. Adjustment can be made in 7 levels
both in auto and manual density modes.
Use the procedure below to adjust the density.
1
Press the System Menu key.
2
Press [
3
Press [Change] of Auto or of Manual.
4
Press [-3] - [+3] (Lighter-Darker) to adjust density.
5
Press [OK].
], [Adjustment/Maintenance] and then [Next] of Send/Box Density Adjust..
Drum Refresh
Refresh the drum when image blur or white spots appear on images in copies.
NOTE: Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
To use [Drum Refresh], load Ledger or A3 size paper into the Multi Purpose tray.
8
Use the procedure below to refresh the drum.
1
Press the System Menu key.
2
Press [
3
Press [Next] of Drum Refresh.
4
Press [Execute] to perform Drum Refresh.
5
After Drum Refresh is completed, press [OK] to return to the Adjustment/Maintenance screen.
], [Adjustment/Maintenance].
8-45
Default Setting (System Menu)
Correcting Fine Black Lines
Correct fine black lines (black streaks caused by contamination), which may appear on the copies, when the
optional document processor used.
Paper feed
direction
The table below shows the available settings.
Item
Description
Off
No correction performed.
On(Low)
Correction performed. The reproduction of the image becomes lower when
using Off.
On(High)
Correction performed. Select this item if black streak remains after using On
(Low). The reproduction of the image becomes lower when using On (Low).
NOTE: Using Correcting Fine Black Line can impair reproduction of fine characters. It is recommended to
keep the default ([Off]).
Use the procedure below to specify the setting for correcting fine black lines.
1
Press the System Menu key.
2
Press [
3
Press [Off], [On(Low)] or [On(High)].
4
Press [OK].
], [Adjustment/Maintenance] and then [Change] of Correcting Black Line.
System Initialization
Initialize the hard disk mounted on the machine to return to the default mode.
Refer to System Initialization on page 8-72 about the initialization procedures.
Display Brightness
Set the brightness of the touch panel.
Use the procedure below to adjust the display brightness.
1
Press the System Menu key.
8-46
Default Setting (System Menu)
2
3
4
Press [
], [Adjustment/Maintenance] and then [Change] of Display Brightness.
Press [1] - [4] (Darker- Lighter) to adjust brightness.
Press [OK].
Silent Mode
Make the machine run more quietly. Select this mode when the running noise is uncomfortable.
Use the procedure below to set Silent mode.
1
2
3
4
Press the System Menu key.
Press [
], [Adjustment/Maintenance] and then [Change] of Silent Mode.
Press [Off] or [On].
Press [OK].
Auto Color Correction
This setting allows you to adjust the detection level used by the machine to determine whether the original is
color or black and white during Auto Color Mode. Setting a lower value will result in more originals being
identified as color, while a larger value will tend to increase the number of originals being identified as black and
white.
Use the procedure below to set the Auto Color Detection Level.
1
2
3
4
Press the System Menu key.
Press [
], [Adjustment/Maintenance], [
] and then [Change] of Auto Color Correction.
Press one of keys [1] to [5] (Color - B & W) to set the detection level.
Press [OK].
Color Registration
When first installing the machine or moving it to a new location, color drift during printing may occur. Use this
function to correct the color position of each of cyan, magenta and yellow to resolve color drift.
Normal registration and detailed settings are available for Color Registration. Color drift can be largely corrected
through normal registration. However, if it is not resolved or to perform more detailed settings, use the detailed
settings.
NOTE: To perform color registration, verify that either 11 × 8 1/2" or A4 paper is loaded into a cassette.
IMPORTANT: Before performing color registration, be sure to perform color calibration (see page 8-52). If color
drift remains, perform color registration.By performing color registration without performing color calibration, the
color drift will be resolved once, however, it may cause the serious color drift later.
Normal Registration
Follow the steps below to correct normal color drift.
8-47
8
Default Setting (System Menu)
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
then [Next] of Color Registration.
3
Press [Print] of Chart. A chart is printed.
] and
On the chart, for each of M (magenta), C (cyan) and
Y (yellow), 3 chart types are printed on one sheet:
H-F (left), V (right), H-R (horizontal).
Chart Example
4
Find the location on each chart where 2 lines most
closely overlap each other. If this is the 0 position,
registration for that color is not required. For the
illustration, B is the appropriate value.
5
Press [Next] of Registration.
6
Press [Change] for the chart to be corrected.
7
Press [+] or [-] to enter the values read from the
chart and press [OK].
Press [+] to increase the value from 0 to 9. To
decrease, press [-].
By pressing [-], the value changes from 0 to
alphabetic letters, going from A to I. To move in the
reverse direction, press [+].
8-48
Default Setting (System Menu)
You cannot use the numeric keys to enter these
values.
8
Repeat steps 6 and 7 to enter the registration
values for each chart.
9
Press [Execute] after all values have been entered.
Color registration begins.
10 Press [OK] after color registration is complete.
Detailed Settings
Follow the steps below to perform more detailed correction.
1
Refer to Steps 1-2 of Normal Registration to display
the Color Registration screen.
2
Press [Detail].
3
Press [Print] of Chart (Details). A chart is printed.
On the chart, for each of M (magenta), C (cyan) and
Y (yellow), charts for H-1 to 7 and V-3 are printed.
8
Chart Example
8-49
Default Setting (System Menu)
4
Find the location on each chart where 2 lines most
closely match. If this is the 0 position, registration
for that color is not required. For the illustration, B
is the appropriate value.
From charts V-1 to V-5, read only the values from
V-3 (center).
5
Press [Next] of Registration (Details).
6
Press [Change] for the chart to be corrected.
7
Press [+] or [-] to enter the values read from the
chart and press [OK].
Press [+] to increase the value from 0 to 9. To
decrease, press [-].
By pressing [-], the value changes from 0 to
alphabetic letters, going from A to I. To move in the
reverse direction, press [+].
You cannot use the numeric keys to enter these
values.
8
Repeat steps 6 and 7 to enter the registration
values for each chart.
9
Press [Execute] after all values have been entered.
Color registration begins.
10 Press [OK] after color registration is complete.
Color Calibration Cycle
After Auto Clear has been activated, or during printing or while processing Color Registration, Performing Color
Calibration... Remaining: 50 seconds may be displayed. While this message is displayed, the machine makes
adjustments to maintain image quality. Wait until the message disappears.
Set the color calibration cycle here. The setting items are as follows.
Item
Description
Auto
Automatically sets the cycle for color calibration.
Short
Sets a short color calibration cycle and increases the number of
times performed, with priority to image quality.
Standard
Sets a standard color calibration cycle, compromising between
image quality and downtime for processing.
Long
Sets a long color calibration cycle and decreases the number of
times performed, to ensure minimal downtime.
8-50
Default Setting (System Menu)
Use the procedure below to set the color calibration.
1
Press the System Menu key.
2
Press [
3
Select [Auto], [Short], [Standard] or [Long].
4
Press [OK].
], [Adjustment/Maintenance], [
] and then [Change] of Color Calibration Cycle.
Gray Adjustment
After prolonged use, or from the effects of surrounding temperature or humidity, the hue of printed color output
may shift or color drift may occur. Use this function to correct color settings when the color of a finished copy
does not match the original. Perform color calibration before using gray adjustment (see page 8-51). Use gray
adjustment when the color is not enhanced even after performing color calibration.
Normal and detailed gray adjustment is available. While normal adjustment will almost completely eliminate
errors in color tones, you can also use detailed adjustment for stubborn color tone problems or where more
precise adjustment is needed.
NOTE: To perform gray adjustment, verify that either 11 × 8 1/2" or A4 paper is loaded into a cassette.
8
Normal adjustment
A total of 3 color pattern pages (No. 1 to 3) are is printed during normal adjustment. The printed color patterns
are read sequentially during the adjustment.
Use the procedure below for normal adjustment.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
then [Next] of Gray Adjustment.
3
Press [Execute]. A color pattern is printed.
] and
Check that the number "1" is printed at the bottom
of the color pattern.
4
As shown in the illustration, place the printed side
down on the platen with the three black boxes
aligned to the top.
5
Press [Execute]. The color pattern is read and
adjustment begins.
The second color pattern is output.
6
Check that the number "2" (to "3") is printed at the
bottom of the color pattern and repeat steps 4 to 6
twice to read color patterns 2 and 3 in sequence.
7
Press [OK] in the adjustment end confirmation
screen.
8-51
Default Setting (System Menu)
Detailed Adjustment
A total of 5 color pattern pages (No. 1 to 5) are printed during detailed adjustment. As with normal adjustment
(page 8-51), the printed color patterns are read sequentially during detailed adjustment.
Use the procedure below to carry out detailed adjustment.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
then [Next] of Gray Adjustment.
3
Press [Detail].
4
Press [Execute]. A color pattern is printed.
] and
Check that the number "1" is printed at the bottom
of the color pattern.
5
As shown in the illustration, place the printed side
down on the platen with the three black boxes
aligned to the top.
6
Press [Execute]. The color pattern is read and
adjustment begins.
The second color pattern is printed.
7
Check that the number "2" (to "5") is printed at the
bottom of the color pattern and repeat steps 5 to 7
four times to read color patterns 2, 3, 4 and 5 in
sequence.
8
Press [OK] in the adjustment end confirmation
screen.
Color Calibration
After prolonged use, or from the effects of surrounding temperature or humidity, the hue of printed color output
may shift or color drift may occur. Using this function enables printing in the most appropriate color by adjusting
hue and color drift in detail. Use gray adjustment when the color is not enhanced even after performing color
calibration (see page 8-51). If the hue and color are not enhanced, use color registration (see page 8-47).
1
Press the System Menu key.
2
Press [
3
Press [Execute]. Color Calibration begins.
4
Press [OK] after Color Calibration is complete.
], [Adjustment/Maintenance], [
] and then [Next] of Color Calibration.
8-52
Default Setting (System Menu)
Developer Refresh
When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
1
Press the System Menu key.
2
Press [
3
Press [Execute]. Developer Refresh begins.
], [Adjustment/Maintenance], [
] and then [Next] of Developer Refresh.
NOTE: Waiting time may be longer when the toner is refilled during developer refresh.
4
Press [OK] after Developer Refresh is complete.
Laser Scanner Cleaning
If white or color streaks appear on images, perform Laser Scanner Cleaning.
1
Press the System Menu key.
2
Press [
3
Press [Execute]. Laser Scanner Cleaning begins.
4
Press [OK] after Laser Scanner Cleaning is complete.
], [Adjustment/Maintenance], [
] and then [Next] of Laser Scanner Cleaning.
MP Tray Cleaning
If dirt appears on images when using the multi purpose tray, perform MP Tray Cleaning.
1
Press the System Menu key.
2
Press [
3
Load two sheets of A4 or Letter paper in the multi purpose tray.
4
Press [Execute]. MP Tray Cleaning begins.
5
Press [OK] after MP Tray Cleaning is complete.
], [Adjustment/Maintenance], [
] and then [Next] of MP Tray Cleaning.
8-53
8
Default Setting (System Menu)
First Print Position
Using this function speeds up either of the first print time of black and white printing or color printing by changing
the default start position of the first print. In addition, the machine can automatically detect the appropriate
position depending on your usage.
Item
Description
Standard
Default of the first print time.
Black & White Priority
Speed up the first print time of black and white printing.
Color Priority
Speed up the first print time of color printing.
Auto
Automatically detects the appropriate position depending on your usage.
1
Press the System Menu key.
2
Press [
3
Select [Standard], [Black & White Priority], [Color Priority] or [Auto].
4
Press [OK].
], [Adjustment/Maintenance], [
] and then [Next] of First Print Position.
8-54
Default Setting (System Menu)
Date/Timer
Date/Timer settings include:
•
Date/Time …8-55
•
Date Format …8-55
•
Time Zone …8-56
•
Auto Panel Reset …8-56
•
Low Power Timer …8-57
•
Auto Sleep …8-57
•
Error Clear Timer …8-59
•
Interrupt Clear Timer …8-59
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Date/Time
Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and
time set here will be displayed on the header.
CAUTION: Be sure to set Time Zone before the Date/Time setup.
Use the procedure below to set the date and time.
1
Press the System Menu key.
2
Press [
3
Press [+] or [–] to enter the date and time respectively.
4
Press [OK].
], [Date/Timer] and then [Change] of Date/Time.
NOTE: If you try to change the date/time when a trial application (page 8-83) is running, the If you change
Date/Time setting, trial functions will be unavailable. Are you sure? message is displayed. To change the date/
time, press [Yes].
Date Format
Select the display format of year, month, and date. The year is displayed in Western notation.
Use the procedure below to select the date format.
1
Press the System Menu key.
2
Press [
3
Select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/MM/DD] and press [OK].
], [Date/Timer] and then [Change] of Date Format.
8-55
8
Default Setting (System Menu)
Time Zone
Set the time difference in the location you are from GMT.
Use the procedure below to set the time difference.
1
Press the System Menu key.
2
Press [
3
Select the location.
], [Date/Timer] and then [Change] of Time Zone.
NOTE: Press [
4
] or [
] to select the location.
Press [Off] or [On] of Summer Time and press [OK].
NOTE: If you select a region that does not utilize summer time, the summer time setting screen will not appear.
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.
NOTE: Refer to page 8-15 for the default settings.
Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto panel reset setting.
1
Press the System Menu key.
2
Press [
3
Press [Off] or [On].
4
Press [OK].
], [Date/Timer] and then [Change] of Auto Panel Reset.
8-56
Default Setting (System Menu)
Panel Reset Timer
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset. Options are
between 5 and 495 seconds (every five seconds).
NOTE: If you select [Off] for Auto Panel Reset, the time display does not appear.
Use the procedure below to set the reset time.
1
Press the System Menu key.
2
Press [
3
Press [+] or [–] to enter the time until Auto Panel Reset is turned on.
], [Date/Timer] and then [Change] of Panel Reset Timer.
You cannot use the numeric keys to enter this value.
4
Press [OK].
Low Power Timer
You can specify the amount of time to wait before Low Power Mode.
Specify a value from 1 - 240 minutes (1 minute increments).
For more information on Low Power Mode, refer to the Low Power Mode and Auto Low Power Mode on page 2-9.
Use the procedure below to set the Low Power Mode.
1
Press the System Menu key.
2
Press [
3
Press [+],[–] or the numeric keys to enter the time until Low Power Mode is turned on.
4
Press [OK].
], [Date/Timer] and then [Low Power Timer].
Auto Sleep
If no job runs for a certain period of time, automatically enter Sleep Mode. Refer to Sleep and Auto Sleep on
page 2-10 for Sleep.
Auto Sleep ON/OFF
Select whether to use Auto Sleep or not.
NOTE: Time remaining before Auto Sleep can be modified as necessary.
Use the procedure below to specify the auto sleep setting.
1
Press the System Menu key.
2
Press [
3
Press [Off] or [On].
4
Press [OK].
], [Date/Timer] and then [Change] of Auto Sleep.
8-57
8
Default Setting (System Menu)
Sleep Timer
Set the amount of time to wait before Auto Sleep. Options are between 1 and 240 minutes (every one minute).
NOTE: If you select [Off] for Auto Sleep, the time display does not appear.
Use the procedure below to set the Auto Sleep time.
1
Press the System Menu key.
2
Press [
3
Press [+] and [–] or the numeric keys to enter the time until Auto Sleep is turned on.
4
Press [OK].
], [Date/Timer] and then [Change] of Sleep Timer.
Auto Error Clear
If an error occurs during printing, the print job stops to wait for the next step to be taken by the user. In the Auto
Error Clear mode, automatically clear the error after a set amount of time elapses.
The following errors are automatically cleared.
Print overrun
Memory is full
Auto Error Clear ON/OFF
Select whether to use Auto Error Clear or not.
Use the procedure below to specify the auto error clear setting.
1
Press the System Menu key.
2
Press [
3
Press [Off] or [On].
4
Press [OK].
], [Date/Timer] and then [Change] of Auto Error Clear.
8-58
Default Setting (System Menu)
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options
are between 5 and 495 seconds (every five seconds).
NOTE: If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
1
Press the System Menu key.
2
Press [
3
Press [+] or [–] to enter the time until printing restarts.
], [Date/Timer], [
] and then [Change] of Error Clear Timer.
You cannot use the numeric keys to enter this value.
4
Press [OK].
Interrupt Clear Timer
Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode
and then left unused. Any period between 5 and 495 seconds (in five-second increments) can be set.
The procedure for setting the interrupt clear timer is explained below.
1
Press the System Menu key.
2
Press [
3
Press [+] or [-] to enter the time for the interrupt clear timer.
4
Press [OK].
], [Date/Timer], [
] and then [Change] of Interrupt Clear Timer.
8-59
8
Default Setting (System Menu)
Editing Destination (Address Book/Adding One Touch Keys)
Save frequently used destinations to Address Book or One Touch Keys. The saved destinations can be
changed. The destinations are available for Send as E-mail, Send to Folder, and Fax Transmission (optional).
Adding a Destination
Add a new destination to the Address Book. There are two registering methods, contacts and groups. When
adding a group, enter the group name and select group members from the Address Book.
NOTE: If user login administration is enabled, you can only edit destinations in the Address Book by logging in
with administrator privileges.
Adding a contact
A maximum of 2,000 contact addresses can be registered. Each address can include the information such as
destination name, E-mail address, FTP server folder path, computer folder path, and FAX No. (optional).
Use the procedure below to register a new individual contact.
1
Press the System Menu key.
2
Press [Edit Destination], [Register/Edit] of Address Book, [Add], [Contact] and then [Next].
3
To specify the address number, press [Change] in Address Number.
4
Press [+],[–] or numeric keys to enter a particular Address Number (1-2500).
To have the number assigned automatically, enter “0000”.
NOTE: Address Number is an ID for a destination. You can select any available number out of 2,500 numbers
for contacts and 500 numbers for groups.
If you specify an address number that is already in use, an error message appears when you press [Register]
and the number cannot be registered. If you set “0000” as the address number, the address is registered under
the lowest available number.
5
Press [OK]. The screen shown in step 3 reappears.
6
Press [Change] of Name.
7
Enter the destination name (up to 32 characters) to be displayed on the Address Book and press [OK]. The
screen shown in step 3 reappears.
NOTE: Refer to the Character Entry Method on page Appendix-7 for details on entering characters.
8
Press [E-mail] to add an e-mail address, [SMB] to add a folder on the computer, or [FTP] to add an FTP
folder.
The procedure differs depending on the transmission method selected.
8-60
Default Setting (System Menu)
E-mail Address
Press [Change] of E-mail Address, enter the E-mail address and press [OK].The table below explains the
items to be entered.
NOTE: Refer to the Character Entry Method on page Appendix-7 for details on entering characters.
The Folder (FTP) Address
Press [Change] of Host Name, Path, Login User Name and Login Password, enter the information for each
item and press [OK].
The table below explains the items to be entered.
Max. No. of
Characters
Item
Description
Host Name*
FTP server host name or IP address
70
Path
Path for the file to be stored (e.g., "\User\ScanData")
If no path is entered, the file is stored in the home directory.
128
Login User Name
User name FTP server login
64
Login Password
Password for FTP server login
64
*
If you specify a port number other than the default (21), use the "Host name: port number" format.
(e.g., FTPhostname:140)
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
NOTE: Refer to the Character Entry Method on page Appendix-7 for details on entering characters.
Press [Connection Test] to check the connection to the FTP server you chose. If the connection fails, check the
entries you made.
8-61
8
Default Setting (System Menu)
The Folder (SMB) Address
Press [Change] of Host Name, Path, Login User Name and Login Password, enter the information for each
item and press [OK].
The table below explains the items to be entered.
Item
Description
Max. No. of
Characters
Host Name*
Host name or IP address of the sending computer
70
Path
Path to the folder used to save files (e.g., “\User\ScanData”)
128
Login User Name
User name for folder access
For example, abcdnet\james.smith
64
Login Password
Password for folder access
64
*
If you specify a port number other than the default (139), use the “Host name: port number” format.
(e.g., SMBhostname:140)
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
NOTE: Refer to the Character Entry Method on page Appendix-7 for details on entering characters.
Press [Connection Test] to check the connection to the computer you chose. If the connection fails, check the
entries you made.
9
Check if the destination entry is correct and press [Register]. The destination is added to the Address Book.
Adding a Group
Compile two or more contacts into a group. Designations in the group can be added at the same time. When
adding a group, a maximum of 500 groups can be added in the Address Book.
NOTE: Before adding a group in the Address Book, the contacts to be included in the group must be added
first. Up to 100 destinations for the e-mail, 500 destinations for the FAX, and the total of 10 destinations for the
FTP and SMB can be registered per a group.
Use the procedure below to register a group.
1
Press the System Menu key.
2
Press [Edit Destination], [Register/Edit] of Address Book, [Add], [Group] and then [Next].
3
To specify the address number, press [Change] in Address Number.
8-62
Default Setting (System Menu)
4
Use [+]/[-] or the numeric keys to enter an address number (1 to 2500).
To have the number assigned automatically, set "0000".
NOTE: Address Number is an ID for a group. You can select any available number out of 2,000 numbers for
contacts and 500 numbers for groups.
If you specify an address number that is already in use, an error message appears when you press [Register]
and the number cannot be registered. If you set "0000" as the address number, the address is registered under
the lowest available number.
5
Press [OK]. The Add Group screen reappears.
6
Press [Change] of Name.
7
Enter the group name displayed on the Address Book not more than 32 characters.
NOTE: Refer to the Character Entry Method on page Appendix-7 for details on entering characters.
8
Press [Member].
9
Press [Add].
10 Select destinations (contacts) to add to the group.
NOTE: Destinations can be sorted or searched by destination name or address number. Refer to
Specifying Destination on page 3-30 for Address List.
11 Press [OK].
If you have more destinations to add, repeat Steps 9 to 11.
12 Check if the selected destination was added to the group and press [Register]. Now the group is added to
the Address Book.
Editing a Destination
Edit/delete the destinations (Contacts) you added to the Address Book.
Use the procedure below to edit a destination.
1
Press the System Menu key.
2
Press [Edit Destination] and then [Register/Edit] of Address Book.
3
Select a destination or group to edit.
NOTE: Destinations can be sorted or searched by destination name or address number. Refer to Specifying
Destination on page 3-30 for Address List.
4
Press [Detail].
The procedure differs depending on the details to be edited.
8-63
8
Default Setting (System Menu)
Editing a Contact
1
Change Address Number, Name and destination type and address. Refer to Adding a contact on page
8-60 for the details.
2
After you have completed the changes, press [Register].
3
Press [Yes] in the change confirmation screen to register the changed destination.
Editing a Group
1
Change Address Number and Name. Refer to Adding a Group on page 8-62 for the details.
2
Press [Member].
3
To delete any destination from the group, select the destination and press [Delete]. Press [Yes] on the
screen to confirm the deletion.
4
After you have completed the changes, press [Register].
5
Press [Yes] in the change confirmation screen to register the changed group.
Deleting a Contact or Group
Repeat Steps 1 to 3, press [Delete]. Press [Yes] on the screen to confirm the deletion. Deletion is performed.
Adding a Destination on One Touch Key
Add a new destination (contact or group). A maximum of 1000 destinations can be registered.
NOTE: Refer to Specifying Destination on page 3-30 for use of One Touch Key.
Use the procedure below to register a new destination under a One Touch key.
1
Press the System Menu key.
2
Press [Edit Destination] and [Register/Edit] of One Touch Key.
3
Select a One Touch Key number (0001 to 1000) for the destination. Pressing Quick No. Search key or [No.]
enables direct entry of a One Touch Key number.
Select a One Touch Key with no registered destination.
4
Press [Register/Edit]. The address book appears.
5
Select a destination (contact or group) to add to the One Touch Key number.
Pressing [Detail] shows the detailed information of the selected destination.
NOTE: Destinations can be sorted or searched by destination name or address number. Refer to Specifying
Destination on page 3-30 for Address List.
6
Press [OK]. The destination will be added to the One Touch Key.
8-64
Default Setting (System Menu)
Editing One Touch Key
Edit/delete the destinations you added to One Touch Key.
Use the procedure below to edit the One Touch key.
1
Press the System Menu key.
2
Press [Edit Destination] and then [Register/Edit] of One Touch Key.
3
Select a One Touch Key number (0001 to 1000) for the destination. Pressing Quick No. Search key or [No.]
enables direct entry of a One Touch Key number.
The procedure differs depending on the details to be edited.
Changing the Registered Information
1
Press [Register/Edit].
2
Select a new destination (Contact or group). Pressing [Detail] shows the detailed information of the
selected destination.
NOTE: Destinations can be sorted or searched by destination name or address number. Refer to
Specifying Destination on page 3-30 for Address List.
8
3
Press [OK].
4
Press [Yes] on the screen to add the destination to the One Touch Key.
Deleting the Registered Information
1
Press [Delete].
2
Press [Yes] on the screen to confirm the deletion of the data registered in the One Touch Key.
8-65
Default Setting (System Menu)
Sort Settings
Select the default sort setting of the address for the address book.
The table below shows the available settings.
Item
Detail
No.
Displays the destination list in order of the registered number.
Name
Displays the destination list in order of the registered name.
Use the procedure below to specify the Sort settings.
1
Press the System Menu key.
2
Press [Edit Destination], [Next] of Address Book Defaults and then [Change] of Sort.
3
Select [No.] or [Name].
4
Press [OK].
Narrow Down Settings
This procedure can be used to filter (narrow down) the types of destination listed when the address book is
displayed.
The table below shows the available settings.
Item
Detail
Off
Displays all destination types in the destination list.
E-mail
Displays only e-mail destinations.
Folder
Displays only folder (SMB or FTP) destinations.
FAX
Displays only FAX destinations.
i-FAX
Displays only i-FAX destinations.
Group
Displays only groups.
Use the procedure below to specify the Narrow Down settings.
1
Press the System Menu key.
2
Press [Edit Destination], [Next] of Address Book Defaults and then [Change] of Narrow Down.
3
Select the type of destination filter.
4
Press [OK].
8-66
Default Setting (System Menu)
Internet Browser Setup
This procedure sets up the Internet browser application. You can specify the following Internet browser settings.
•
Internet Browser Setting
•
Browser Preferences
•
Proxy Settings
Internet Browser Setting
This selects whether or not the Internet browser is used.
Use the procedure below to specify the Internet browser setting.
1
Press the System Menu key.
2
Press [
] and then [Internet].
NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Press [Change] of Internet Browser.
4
Press [On] or [Off].
5
Press [OK].
8
Browser Preferences
This specifies Internet browser preferences such as your home page setting and how pages are displayed.
NOTE: This is not displayed if you selected Off in Internet Browser Setting (page 8-67).
Use the procedure below to set your Internet browser preferences.
1
Press the System Menu key.
2
Press [
] and then [Internet].
NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Press [Next] of Browser Environment.
4
To set your home page, press [Change] of Home Page, press [URL], enter the URL and then press [OK].
Press [OK] again.
NOTE: Refer to the Character Entry Method on page Appendix-7 for details on entering characters.
8-67
Default Setting (System Menu)
5
To set the text size, press [Change] of Text Size, select [Large], [Medium] or [Small] as the text size and
then press [OK].
6
To set the display mode, press [Change] of Display Mode, select [Normal], [Just-Fit Rendering] or [SmartFit Rendering] as the display mode and then press [OK].
7
To specify the settings for accepting cookies, press [Change] of Cookie, select [Accept All], [Reject All] or
[Prompt before Accepting] as your cookie acceptance policy and then press [OK].
Proxy Settings
Use the procedure below to specify the proxy settings.
1
Press the System Menu key.
2
Press [
] and then [Internet].
NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Press [Change] of Proxy and then press [On].
 To set a proxy server (HTTP)
1
Press [Keyboard] of Proxy Server (HTTP), enter the proxy address and press [OK].
2
Press [# Keys] and enter the port number.
 To set a proxy server (HTTPS)
1
Press [Keyboard] of Proxy Server (HTTPS), enter the proxy address and press [OK].
2
Press [# Keys] and enter the port number.
 To set domains for which no proxy is used
1
Press [Keyboard] of Do Not Use Proxy for Following Domains, enter the domain name and press [OK].
NOTE: Refer to the Character Entry Method on page Appendix-7 for details on entering characters.
4
Press [OK].
8-68
Default Setting (System Menu)
Applications
You can install and use applications that will make your day-to-day use of this machine more efficient.
Installing Applications
You can install new applications.
Use the procedure below to install an application.
1
Insert the USB memory containing the application to be installed into the USB memory slot (A1).
NOTE: If Removable Memory is recognized. Displaying files. appears, press [No].
2
Press the System Menu key.
3
Press [
] and then [Application].
NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
8
4
Press [Add].
5
Select the application to be installed and press [Install].
You can view detailed information on the selected application by pressing [Detail].
6
When the confirmation screen appears, press [Yes].
Installation of the application begins. Depending on the application being installed, the installation may take
some time.
Once the installation ends, the original screen reappears.
7
To install another application, repeat steps 5 to 6.
8
To remove the USB memory, press [Remove Memory] and wait until the Removable Memory can be safely
removed message appears. Then remove the USB memory.
8-69
Default Setting (System Menu)
Activating/Deactivating Application
To use an application, set the application to Activate.
Use the procedure below to start using an application.
1
Press the System Menu key.
2
Press [
] and then [Application].
NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Select the desired application and press [Activate].
You can view detailed information on the selected application by pressing [Detail].
NOTE: To exit an application, press [Deactivate].
4
Enter the license key and press [Official].
Some applications do not require you to enter a license key. If the license key entry screen does not appear,
go to Step 5.
To use the application as a trial, press [Trial] without entering the license key.
5
When the confirmation screen appears, press [Yes].
IMPORTANT: If you change the date/time while using an application, you will no longer be able to use the
application.
Launching Applications
You can launch any application for which Activate is set.
Use the procedure below to launch an application.
1
Press the Application key.
A list of available applications appears on the touch panel.
2
Press the key for the application to be launched.
The application starts up.
3
To exit the application, press [✕].
4
When the application exit confirmation screen appears, press [Yes].
NOTE: The procedure for exiting some applications may differ.
8-70
Default Setting (System Menu)
Deleting Applications
Use the procedure below to delete an installed application.
IMPORTANT: Always exit the application to be deleted before deleting the application. (Refer to Activating/
Deactivating Application on page 8-70.)
1
Press the System Menu key.
2
Press [
] and then [Application].
NOTE: If login administration is disabled, the user authentication screen appears. Enter your login user name
and password and then press [Login]. For this, you need to login with administrator privileges. Refer to Adding
a User on page 11-5 for the default login user name and password.
3
Select the application to be deleted and press [Delete].
You can view detailed information on the selected application by pressing [Detail].
4
When the deletion confirmation screen appears, press [Yes]. The application is deleted.
8
8-71
Default Setting (System Menu)
System Initialization
Initialize the hard disk mounted on the machine to return to the default mode.
CAUTION: System initialization will erase Custom Document Boxes, data stored in Document Box, addresses
in the Address Book, user property, account information, and settings.
NOTE: This item will not be displayed if the optional Data Security Kit is installed. Refer to the Data Security
Kit (E) Operation Guide on the bundled CD-ROM about the functions added when the Data Security Kit is
installed and related procedures.
Using KMnet Viewer allows you to back up addresses in the Address Book.
1
Press the System Menu key.
2
Press [
3
If user login administration is disabled, the user authentication screen appears. Enter your login user name
and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
4
When the confirmation screen appears, press [Yes].
], [Adjustment/Maintenance] and then [Execute] of System Initialization.
Initialization starts.
IMPORTANT: The Formatting... Do not turn off the main power switch. message appears during initialization.
Wait until initialization ends.
5
Once the initialization ends, the message Task is completed. Turn the main power switch off and on.
appears. Turn the main power switch off.
Restarting the System
Restart the CPU without turning the main power switch off. Use this to deal with any unstable operation by the
machine. (Same as the computer restart.)
Use the procedure below to restart the system.
1
Press the System Menu key.
2
Press [System] and [Execute] of Restart.
NOTE: If user login administration is disabled, the user authentication screen appears. Enter a login user
name and password, and press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
When the confirmation screen appears, press [Yes]. The system is restarted.
8-72
Default Setting (System Menu)
Network Setup
The following network settings are available.
•
Checking Host Name …8-73
•
TCP/IP (IPv4) Setup …8-73
•
TCP/IP (IPv6) Setup …8-73
•
Protocol Detail …8-75
•
NetWare Setup …8-76
•
AppleTalk Setup …8-76
•
WSD Scan Setup …8-76
•
WSD Print Setup …8-77
•
Secure Protocol …8-77
•
IPSec Setting …8-79
•
LAN Interface Setup …8-79
Checking Host Name
Check the host name of the machine. Use the procedure below.
8
1
Press the System Menu key.
2
Press [System], [Next] of Network. Check the host name displayed under Host Name.
TCP/IP (IPv4) Setup
Set up TCP/IP to connect to the Windows network.
Refer to TCP/IP (IPv4) Setup (by Entering IP Addresses) on page 2-13 about the procedures.
TCP/IP (IPv6) Setup
Set up TCP/IP (IPv6) to connect to the network. The default settings are "TCP/IP Protocol: On, TCP/IP (IPv6):
Off. Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next] of TCP/IP Setting.
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Next] of IPv6.
6
Press [Change] of IPv6.
7
Press [On]. IP Address (Link Local) appears.
8
Press [OK].
9
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
8-73
Default Setting (System Menu)
Manual Setting (IPv6)
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6). The manual setting is
available when selecting [On] for TCP/IP (IPv6). Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next] of TCP/IP Setting.
3
Press [Next] of IPv6.
4
Press [Next] of Manual Setting.
5
Press [IP Address (Manual)] to enter IP address. The format of the IPv6 address is a sequence of numbers
(128 bit in total) separated by colons, e.g. 2001:db8:3c4d:15::1a2c:1a1f.
6
Press [OK].
Press [# Keys] of Prefix Length (0 - 128) to enter the prefix length using the numeric keys.
7
Press [Default Gateway] to enter the default gateway.
8
Check that all the entries are correct and Press [OK].
9
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
RA (Stateless) Settings
Select whether or not to use RA (Stateless). The RA (Stateless) settings are available when selecting [On] for
TCP/IP (IPv6). The default setting is On. Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next] of TCP/IP Setting.
3
Press [Next] of IPv6.
4
Press [Change] of RA(Stateless).
5
Press [On] or [Off] of RA (Stateless). When selecting [On], IP Address 1 to 5 (Stateless) appears.
6
Press [OK].
7
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
DHCP (IPv6) Settings
Select whether or not to use the DHCP (IPv6) server. The DHCP (IPv6) Settings are available when selecting
[On] for TCP/IP (IPv6). The default setting is On. Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next] of TCP/IP Setting.
3
Press [Next] of IPv6.
4
Press [Change] of DHCP.
5
Press [On] or [Off] of DHCP. When selecting [On], IP Address (Stateful) appears.
8-74
Default Setting (System Menu)
6
Press [OK].
7
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
Protocol Detail
The table below lists the network related function settings. The network related functions are available when
TCP/IP is On.
Item
Description
Default
Setting
Restarting
the System*
NetBEUI
Selects whether or not to receive documents using
NetBEUI.
On
Y
LPD
Select whether or not to receive documents using LPD as
the network protocol.
On
Y
SMTP
(E-mail TX)
Select whether or not to send e-mail using SMTP.
Off
N
POP3
(E-mail RX)
Select whether or not to receive e-mail using POP3.
Off
N
FTP Client
(Transmission)
Select whether or not to send documents using FTP.
When selecting [On], set the FTP Port Number. Use the
FTP default port 21.
On
Y
FTP Server
(Reception)
Select whether or not to receive documents using FTP.
On
Y
SMB Client
(Transmission)
Select whether or not to send documents using SMB.
When selecting [On], set the SMB default Port Number.
Use the SMB default port 139. For Windows Vista, use 445.
On
N
i-FAX
Select whether or not to use i-FAX.
On
N
LDAP
Select whether or not to use LDAP.
Off
N
SNMP
Select whether or not to communicate using SNMP.
On
Y
SNMPv3
Select whether or not to communicate using SNMPv3.
Off
Y
HTTP
Select whether or not to communicate using HTTP.
On
Y
HTTPS
Select whether or not to communicate using HTTPS.
SSL must be set to [On] in SSL Setup on page 8-77.
On
Y
IPP
Select whether or not to communicate using IPP. When
selecting [On], set the IPP default Port Number. Use the
IPP default port 631.
Off
Y
IPP over SSL
Select whether or not to use IPP over SSL.
SSL must be set to [On] in SSL Setup on page 8-77.
Off
Y
Raw Port
Select whether or not to receive documents using Raw Port.
On
Y
*
Y: The machine must be restarted after the setting is changed.
N: The machine does not need to be restarted after the setting is changed.
8-75
Port:21
Port:139
Port:631
8
Default Setting (System Menu)
Use the procedure below.
The following procedure is an example for specifying the SMTP (E-mail TX) settings.
1
Press the System Menu key.
2
Press [System] and then [Next] of Network to display the network settings screen.
3
Display the item you want to set and press [Change] for that item.
In this example, press [Change] of SMTP (E-mail TX).
4
Press [On] or [Off].
5
Press [OK].
6
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings are "On, Frame Type: Auto".
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of NetWare.
3
Press [On].
4
Press the key for the frame type you want to use.
5
Press [OK].
6
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
AppleTalk Setup
Select the Apple Talk network connection.
Refer to AppleTalk Setup on page 2-15 about the procedures.
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On. Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of WSD Scan.
3
Press [On] or [Off].
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
8-76
Default Setting (System Menu)
WSD Print Setup
Select whether or not to use WSD Print. The default setting is On. Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of WSD Print.
3
Press [On] or [Off].
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
Secure Protocol
Encrypt the communication between your PC and the machine using the SSL encryption. After changing the
setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting
the system, refer to Restarting the System on page 8-72.
The following Secure Protocol settings are available.
•
SSL Setup …8-77
•
IPP Security Setup …8-77
•
HTTP Security Setup …8-78
•
LDAP Security Setup …8-78
8
SSL Setup
Select whether or not to use SSL. The default setting is On. Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network, [Next] of Secure Protocol, and then [Next] of SSL.
3
Press [On] or [Off].
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
IPP Security Setup
Select the IPP security level. This setup is available when SSL is On. The default setting is IPP over SSL Only.
NOTE: IPP must be set to [On] in Protocol Detail on page 8-75.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network, [Next] of Secure Protocol, and then [Change] of IPP Security.
8-77
Default Setting (System Menu)
3
Press [IPP over SSL Only] or [IPP or IPP over SSL].
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
HTTP Security Setup
Select the HTTP security level. This setup is available when SSL is On. The default setting is HTTPS Only.
NOTE: HTTP must be set to [On] in Protocol Detail on page 8-75.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network, [Next] of Secure Protocol, and then [Change] of HTTPS Security.
3
Press [HTTP or HTTPS] or [HTTPS Only].
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
LDAP Security Setup
Select the type of encryption according to the type of security employed by the LDAP server. This setup is
available when SSL is On. The default setting is Off.
NOTE: LDAP must be set to [On] in Protocol Detail on page 8-75.
The table below shows the available settings.
Item
Description
Off
Do not use security employed by the LDAP server.
LDAP over SSL
Use implicit mode for data communication. The server provides services
using the LDAP over SSL port (636). Encryption is applied to any data
communication using this port.
LDAPv3/TLS
Use explicit mode for data communication. Select this if the server supports
the start TLS command. This uses the same port (389) as LDAP.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network, [Next] of Secure Protocol, and then [Change] of LDAP Security.
3
Press [Off], [LDAP over SSL] or [LDAPv3/TLS].
8-78
Default Setting (System Menu)
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
IPSec Setting
Sets up IPSec. The default setting is Off. Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network, and then [Change] of IPSec.
NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Press [On].
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
LAN Interface Setup
Specify the settings for the LAN interface to be used. The default setting is Auto. Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of LAN Interface.
3
Select [Auto], [10BASE-T Half], [10BASE-T Full], [100BASE-TX Half] or [100BASE-TX Full] as the LAN
interface.
4
Press [OK].
5
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-72.
8-79
8
Default Setting (System Menu)
Interface Block Setting
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or
optional interfaces.
The following interface block settings are available:
•
USB Host (USB memory slot setting)
•
USB Device (USB interface setting)
•
Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is Unblock.
Use the procedure below to specify the USB Host setting.
1
Press the System Menu key.
2
Press [System], [Next] of Interface Block Setting and then [Change] of USB Host.
NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Press [Block].
4
Press [OK].
USB Device (USB interface setting)
This locks and protects the USB interface connector (B1) (USB Device). The default setting is Unblock.
Use the procedure below to specify the USB Device setting.
1
2
3
4
Press the System Menu key.
Press [System], [Next] of Interface Block Setting and then [Change] of USB Device.
Press [Block].
Press [OK].
Optional interface (Optional interface card setting)
This locks and protects the optional interface slots (OPT1 or OPT2). The default setting is Unblock.
Use the procedure below to specify the optional interface setting.
1
2
Press the System Menu key.
3
Press [Block].
4
Press [OK].
Press [System], [Next] of Interface Block Setting and then [Change] of Optional Interface 1 or Optional
Interface 2.
8-80
Default Setting (System Menu)
Security Level (Security Level setting)
The Security Level setting is primarily a menu option used by service personnel for maintenance work. There is
no need for customers to use this menu.
Document Guard Setting
When the optional Printed Document Guard Kit is installed, the machine prevents the unauthorized copying and/
or transmission of documents that contain important confidential or personal information.
Use the Security Watermark of Advanced in KX DRIVER to embed the guard pattern in a document. (Refer to
the Printer Driver User Guide for details.)
We suggest you to confirm how the machine performs this function on your environment.
Canceled.
copy
Print the guard
pattern using KX
DRIVER.
send
or fax
Machine Operation after Detecting the Document Guard Pattern
Item
Description
Common operation
Displays the message that indicates the machine detected the document
guard pattern and stops scanning the remaining documents.
Copy functions
Prints the documents in blank from the position that the machine detected
the document guard pattern.
Document Box functions
Does not store the documents in the hard disk
Send functions
Cancels the job.*
FAX functions
Does not send the documents.
*
Sends the documents that are scanned before the document guard pattern is detected if you have
selected File Separation. If not, every documents will not to be sent.
8-81
8
Default Setting (System Menu)
Limitations:
- Scanning speed will be limited to the speed of scanning 600 dpi image. (Printing speed will not
be limited.)
- FAX transmission will be limited to the memory transmission.
Note:
- The Printed Document Guard Kit should not fully prevents a leak of information. We do not
guarantee any loss incurred while using this feature or when malfunction occurred with this
feature.
- The guard pattern printed on the colored paper or paper that is decorated with special design
may not be detected.
- We do not guarantee the integrity of the detection. If the malfunction occurs, contact your service
representative.
Use the procedure below to specify the Document Guard setting.
1
Press the System Menu key.
2
Press [System] and then [Change] of Document Guard.
NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Press [On].
4
Press [OK].
8-82
Default Setting (System Menu)
Optional Functions
You can use the optional applications installed on this machine.
Overview of the Applications
The applications listed below are installed on this machine.
You can use these applications for a limited period on a trial basis.
•
Printed Document Guard Kit
This prevents the unauthorized copying and/or transmission of documents that contain important confidential or
personal information. When a document is printed from a computer, this feature imprints a special pattern on
the document. When anyone attempts to copy or send that document on this machine, the machine detects the
pattern and protects the information by printing the document in blank, prohibiting transmission.
NOTE: Restrictions such as the number of times the application can be used during the trial period differ
depending on the application.
Starting Application Use
Use the procedure below to start using an application.
1
Press the System Menu key.
2
Press [System] and then [Next] of Optional Function.
NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Select the desired application and press [Activate].
You can view detailed information on the selected application by pressing [Detail].
4
In the license key entry screen, press [Official].
Some applications do not require you to enter a license key. If the license key entry screen does not appear,
go to Step 5.
To use the application as a trial, press [Trial] without entering the license key.
5
When the confirmation screen appears, press [Yes].
IMPORTANT: If you change the date/time while using an application, you will no longer be able to use the
application.
8-83
8
Default Setting (System Menu)
Checking Application Details
Use the procedure below to check the details of an application.
1
Press the System Menu key.
2
Press [System] and then [Next] of Optional Function.
NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
3
Select the application you want to check the details of and press [Detail].
You can now view detailed information on the selected application.
Accessibility Display (Enlarged Touch Panel Display)
Touch panel characters and key displays can be enlarged. Use the numeric keys to select items and proceed
to the next screen.
NOTE: Accessibility can be used only with Copying and Sending registered on the Quick Setup screen.
To set functions other than those displayed in the accessibility screens, you must return to the original display.
Press the Accessibility Display key again.
Press the Accessibility Display key when in the Copy
or Send (i.e. the Copy or Send key indicator is On).
Ready to copy.
Enlarged keys or characters appear on the touch panel.
Copies
Operation can also be made by pressing any numeric
key corresponding to the number displayed. (e.g. Press
the 2 key to adjust zoom.)
Quantity
Auto
Paper
Selection
2-sided
>>2-sided
Duplex
Status
100%
Zoom
2 in 1
Combine
Normal 0
Density
Follow the instructions on the screen for subsequent
operations.
Off
Staple/Punch
10/10/2008
10:10
8-84
9 Maintenance
This chapter describes cleaning and toner replacement.
•
•
Cleaning..............................................................................................9-2
Toner Container and Waste Toner Box Replacement .........................9-8
9-1
Maintenance
Cleaning
Clean the machine regularly to ensure optimum output quality.
CAUTION: For safety, always unplug the power cord before cleaning the machine.
Original Cover / Glass Platen
Wipe the backside of the original cover, the inside of the document processor and the glass platen with a soft
cloth dampened with alcohol or mild detergent.
IMPORTANT: Do not use thinner or other organic solvents.
Original Cover
Glass Platen
9-2
Maintenance
Slit Glass/Dual scanning area
If black streaks or dirt appears in copies when using the
optional document processor, clean the slit glass with
the supplied cleaning cloth. The message Clean the slit
glass. may be displayed if the slit glass requires
cleaning.
Clean the slit glass.
1.Open the document processor.
2.Clean the surface of the slit glass located
on the left side with the supplied dry cloth.
3.Close the document processor and press [End].
Note that dirty glass and sheet may cause
black streaks to appear in the output.
When using the document processor to allow dual
scanning, clean the dual scanning unit also.
02/03
End
Hold
Status
10/10/2008
10:10
IMPORTANT: Wipe the slit glasses with the dry
accessory cloth. Do not use water,soap or solvents for
cleaning.
1
Remove the cloth from the cleaning cloth
compartment.
2
Open the document processor and wipe the slit
glass (a).
3
Wipe the white guide (b) on the document
processor.
4
When using the document processor to allow dual
scanning, open the top cover of the document
processor.
a
b
9-3
9
Maintenance
5
Wipe the slit glass.
6
Wipe the white roller.
7
Close the document processor top cover and return
the cleaning cloth to the cleaning cloth
compartment.
8
Press [End].
9-4
Maintenance
Separator
Clean the separator regularly (at least monthly) to ensure optimum output quality.
1
Open the front cover.
2
Remove cleaning brush (blue colored).
9
3
Pull up and open left cover 1.
4
As shown in the figure, clean dirt from the separator
by moving the brush from side to side along the
separator.
9-5
Maintenance
5
Put away the cleaning brush, press the specified
position of the front cover and left cover 1 to close.
1
Open the front cover.
2
Remove the cleaning brush (blue colored).
3
Pull up and open left cover 1.
Transfer Roller
9-6
Maintenance
4
As shown in the figure, clean dirt from the transfer
roller by moving the brush from side to side along
the roller while rotating the roller by turning the gear
at the left end of the roller.
5
Put away the cleaning brush, press the specified
position of the front cover and left cover 1 to close.
9
9-7
Maintenance
Toner Container and Waste Toner Box Replacement
When the touch panel displays Add toner, replace the toner.
Every time you replace the toner container, be sure to clean the parts as instructed below. Dirty parts may
deteriorate output quality.
CAUTION: Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks
may cause burns.
Toner Container Replacement
1
Open the front cover.
2
Turn the toner container release lever to the vertical
position.
9-8
Maintenance
3
Open the provided plastic disposal bag and place it
at the toner container slot.Open the provided
plastic disposal bag and place it at the toner
container slot.
4
Remove the old toner container by holding the
handle and place it in the provided plastic disposal
bag.
9
5
9-9
Hold the new toner container in both hands and
shake it from side to side several times.
Maintenance
6
Hold the new toner container in both hands and
gently push it in.
7
Turn the toner container release lever to the
horizontal position.
Use the same procedure to replace the other color
toner containers.
8
Close the front cover.
NOTE: Return the exhausted toner container and
waste toner box to your dealer or service
representative. The collected toner container and
waste toner box will be recycled or disposed in
accordance with the relevant regulations
9-10
Maintenance
Waste Toner Box Replacement
1
Open the front cover.
2
Press the release button (1) and pull out the waste
toner tray (2).
9
3
Cap the old waste toner box.
4
Remove the old waste toner box at an angle and
place it in the plastic disposal bag provided.
CAUTION: Do not attempt to incinerate the toner
container or the waste toner box. Dangerous sparks
may cause burns.
9-11
Maintenance
5
Open the new waste toner box cap.
6
Install a new waste toner box.
7
Press on the left edge of the new waste toner box
to lock it.
8
Press the specified position to close the waste
toner tray. When the tray reaches the correct
position, it locks in place with a clicking sound.
9
Close the front cover.
NOTE: Return the exhausted toner container and
waste toner box to your dealer or service
representative. The collected toner container and
waste toner box will be recycled or disposed in
accordance with the relevant regulations.
9-12
10 Troubleshooting
This chapter explains how to solve problems with the machine.
•
•
•
Solving Malfunctions .........................................................................10-2
Responding to Error Messages ........................................................10-6
Clearing Paper Jams ......................................................................10-15
10-1
Troubleshooting
Solving Malfunctions
The table below provides general guidelines for problem solving.
If a problem occurs with your machine, look into the checkpoints and perform procedures indicated on the
following pages. If the problem persists, contact your Service Representative.
Symptom
Checkpoints
Corrective Actions
Reference
Page
The operation panel
does not respond
when the main power
switch is turned on.
Is the machine plugged in?
Plug the power cord into an AC
outlet.
—
Pressing the Start key
does not produce
copies.
Is there a message on the
touch panel?
Determine appropriate response to
the message and respond
accordingly.
10-6
Is the machine in Sleep
mode?
Press the Power key to recover
the machine from Sleep mode. The
machine will be ready to copy
within a minute.
2-10
Are the originals loaded
correctly?
When placing originals on the
platen, place them face-down and
align them with the original size
indicator plates.
2-32
When placing originals in the
optional document processor,
place them face-up.
2-34
Is the machine in Auto
Density mode?
Set the correct density level for
auto density.
—
Is the machine in Manual
Density mode?
Use [Image Quality] to set the
correct density level.
3-9
When changing the default density
level, adjust the density manually
and choose the desired level.
—
Is the toner distributed evenly
within the toner container?
Shake the toner container from
side to side about several times.
9-8
Is there a message indicating
the addition of toner?
Replace the toner container.
9-8
Is the paper damp?
Replace the paper with new paper.
2-20
Is the drum dirty?
Carry out Drum Refresh.
8-45
Carry out Developer Refresh.
8-53
Is the scanner dirty?
Carry out Laser Scanner Cleaning.
8-53
Is EcoPrint mode enabled?
Disable EcoPrint mode.
8-36
Blank sheets are
ejected.
Printouts are too light.
10-2
Troubleshooting
Symptom
Printouts are too dark.
Checkpoints
Corrective Actions
Reference
Page
Is the machine in Auto
Density mode?
Set the correct density level for
auto density.
—
Is the machine in Manual
Density mode?
Use [Image Quality] to set the
correct density level.
3-9
When changing the default density
level, adjust the density manually
and choose the desired level.
—
Copies have a moire
pattern (dots grouped
together in patterns
and not aligned
uniformly).
Is the original a printed
photograph?
Set the image quality to [Print
Photo].
3-9
Printouts are not
clear.
Did you choose appropriate
image quality for the original?
Select appropriate image quality.
9-2
Printouts are dirty.
Is the platen or the document
processor dirty?
Clean the platen or the document
processor.
9-2
Is the transfer roller dirty?
Brush the transfer roller clean.
9-6
Is the drum dirty?
Carry out Drum Refresh.
8-45
Carry out Developer Refresh.
8-53
Is the scanner dirty?
Carry out Laser Scanner Cleaning.
8-53
Is the Printed Document
Guard Kit enabled?
Disable the Printed Document
Guard Kit.
Appendix6
Printouts are fuzzy.
Is the machine being used in
very humid conditions?
Carry out Drum Refresh.
8-45
Images are skewed.
Are the originals placed
correctly?
When placing originals on the
platen, align them with the original
size indicator plates.
2-34
When placing originals in the
optional document processor, align
the original width guides securely
before placing the originals.
2-34
Check the position of the paper
width guides.
2-35
Is the paper loaded
correctly?
10-3
10
Troubleshooting
Symptom
Paper often jams.
Checkpoints
Corrective Actions
Reference
Page
Is the paper loaded
correctly?
Load the paper correctly.
2-21
Is the paper of the supported
type? Is it in good condition?
Remove the paper, turn it over, and
reload it.
2-21
Is the paper curled, folded or
wrinkled?
Replace the paper with new paper.
2-21
Are there any loose scraps or
jammed paper in the
machine?
Remove any jammed paper.
10-15
Printouts from the
document processor
have black lines.
Is the slit glass dirty?
Clean the slit glass.
9-3
Printouts are
wrinkled.
Is the paper separator of the
paper feed unit dirty?
Clean the paper separator.
9-5
Is the paper damp?
Replace the paper with new paper.
2-20
Is the paper set in a proper
orientation?
Change the orientation in which the
paper is positioned.
—
Is the machine plugged in?
Plug the power cord into an AC
outlet.
—
Is the machine powered on?
Turn on the main power switch.
3-2
Is the printer cable
connected?
Connect the correct printer cable
securely.
2-3
Was the machine powered
on before the printer cable
was connected?
Power on the machine after
connecting the printer cable.
2-3
Is Press Status Key...
displayed at the top of the
screen?
Press the Status/Job Cancel key,
[Printing Jobs], and then [Resume
All Print Jobs] to restart printing.
—
Documents are
printed improperly.
Are the application software
settings at the PC set
properly?
Check that the printer driver and
application software settings are
set properly.
—
While the operation
panel was being used,
the keys locked up
and do not respond
when pressed.
Is the operation panel
locked?
Check the panel lock setting in
COMMAND CENTER and change
the setting if necessary.
KYOCERA
COMMAND
CENTER
Operation
Guide
Cannot print.
10-4
Troubleshooting
Symptom
Cannot print with USB
memory.
Checkpoints
Corrective Actions
Reference
Page
Was the USB memory
formatted with a machine
other than this machine?
Format the USB memory with this
machine.
6-20
Is the USB host blocked?
Select Unblock in the USB host
settings.
8-80
Check that the USB memory
is securely plugged into the
machine.
—
—
When displaying an
image sent from the
machine on the PC, an
image size is shrunk
vertically or
horizontally.
Have you selected
200×100dpi Normal or
200×400dpi Super Fine for
the scan resolution?
Select a scan resolution other than
200×100dpi Normal or 200×400dpi
Super Fine when sending an
image.
—
USB memory not
recognized.
Check that the USB memory
is securely plugged into the
machine.
—
—
Is the USB host blocked?
Select Unblock in the USB host
settings.
8-80
Perform Gray
Adjustment in the
System Menu. is
displayed.
Over long periods of use, the
effects of the ambient
temperature and humidity
can cause color output hues
to vary slightly.
Whenever the printed hues differ
from the original document or
image, carry out Gray Adjustment.
8-51
Performing Color
Calibration... appears
during continuous
copying and copying
stops.
The machine is carrying out a
calibration process to ensure
color stability.
This is not a fault.Resume
continuous copying when the
calibration process ends.
8-50
White or color streaks
appear on prints.
The inside of the machine
may be dirty.
Carry out Laser Scanner Cleaning.
8-53
10-5
10
Troubleshooting
Responding to Error Messages
If the touch panel displays any of these messages, follow the corresponding procedure.
Alphanumeric
Error Message
Checkpoints
Corrective Actions
Reference
Page
Acceptable staple
count exceeded.
Is the acceptable staple
count exceeded? For
details, refer to
Specifications on page
Appendix-24.
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job.
—
Add paper in cassette
1.
Is the indicated cassette out
of paper?
Load paper.
2-20
Add paper in Multi
Purpose tray.
Is the paper of the selected
size loaded in the multi
purpose tray?
Load the paper in the multi purpose
tray which is of the size and type
indicated on the touch panel.
2-24
Add staples.
Has any of the document
finisher run out of staples?
If the staples are depleted, the
machine will stop and the location of
staple depletion will be indicated on
the touch panel.
Leave the machine on and follow the
instruction to replace the staple case.
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job.
—
Add toner.
–
Replace the toner container.
9-8
Box is not found.
–
This job is canceled because the
specified box cannot be found. Press
[End].
—
Box limit exceeded.
–
Document box is full, and no further
storage is available; Job is canceled.
Press [End].
—
–
Repeat Copy box is full, and no
further repeat copy is available.
Press [Continue] to print scanned
pages.
Press [Cancel] to cancel the job.
—
–
An error has occurred when
connecting to the authentication
server. Refer to Responding to
Authentication Server Connection
Error for the error message and
corrective actions.
10-14
Cannot connect to
Authentication
Server.
10-6
Troubleshooting
Error Message
Checkpoints
Corrective Actions
Reference
Page
Cannot duplex print
on this paper.
Did you select a paper size/
media type that cannot be
duplex printed?
Select the available paper type.
Press [Continue] to print without
using Duplex.
3-12
Cannot execute this
job.
–
This job is canceled because it is
restricted by Job Accounting. Press
[End].
—
Cannot offset this
paper.
Did you select a paper size/
media type that cannot be
offset?
Select the available paper size/type.
Press [Continue] to print without
using Offset.
3-14
Cannot print the
specified number of
copies.
–
Only one copy is available due to
processing too many jobs in parallel.
Press [Continue] to continue printing.
Press [Cancel] to cancel the job.
—
Cannot staple at the
specified position.
Have you selected a
position that cannot be
stapled?
Select a position that can be stapled.
Press [Continue] to print without
using Staple.
—
Cannot staple this
paper.
Did you select a paper size/
type that cannot be stapled?
Select the available paper size/type.
Press [Continue] to print without
using Staple.
—
Check the cover.
Is there any cover which is
open?
Close the cover indicated on the
touch panel.
—
Check the document
processor.
Is the document processor
open?
Close the document processor.
—
Is the top cover of the
document processor open?
Close the top cover of the document
processor.
10-28
Check the finisher.
Is the document finisher set
correctly?
Set the document finisher correctly.
For details, refer to the respective
Operation Guides.
—
Clean the slit glass.
–
Clean the slit glass using the cleaning
cloth supplied with the document
processor.
9-3
Confidential
document is
detected.
–
The machine detects the documents
guard pattern. The scanned
document is printed in blank and
sending of the document is canceled.
8-81
Failed to specify Job
Accounting.
–
The job is canceled. Press [End].
—
Failed to store job
retention data.
–
The job is canceled. Press [End].
—
10-7
10
Troubleshooting
Error Message
Checkpoints
Corrective Actions
Reference
Page
FAX box limit
exceeded.
–
FAX box is full, and no further storage
is available. The job is canceled.
Press [End]. Try to perform the job
again after printing or deleting data
from the FAX box.
—
Finisher tray is full of
paper.
Is the acceptable storage
capacity exceeded for the
document finisher tray?
Remove paper from the document
finisher tray.
If printing can be restarted, the touch
panel display will prompt you to press
[Continue]. Then press [Continue].
—
Hard Disk error.
Job is canceled.
Press [End].
–
An error has occurred on the hard
disk. The possible error codes and
their descriptions are as follows.
01: Initialization error. Initialize the
hard disk.
04: Insufficient space on the hard
disk to complete this operation. Move
or delete data stored on the hard disk
to increase available space.
—
Incorrect account ID.
–
The Account ID does not match.
Check the registered Account ID.
—
Incorrect box
password.
–
Enter the correct password.
—
Incorrect Login User
Name or Password.
–
Enter correct login user name or
password.
—
Job Accounting
restriction exceeded.
Is the acceptable printing
count restricted by Job
Accounting exceeded?
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
This job is canceled. Press [End].
—
Job separator is full
of paper.
Is the maximum capacity of
Take some paper out of the job
the job separator exceeded? separator. Printing then resumes.
—
KPDL error.
–
PostScript error has occurred.
The job is canceled. Press [End].
—
Machine failure.
–
Internal error has occurred. Make a
note of the error code displayed on
the touch panel. Turn off the
machine, unplug the power cord, and
contact your Service Representative.
—
Maximum number of
scanned pages.
Is the acceptable scanning
count exceeded?
Only one copy of the scanned pages
is available. Press [Continue] to print,
send or store the scanned pages.
Press [Cancel] to cancel printing,
sending or storing.
—
10-8
Troubleshooting
Error Message
Memory is full.
Checkpoints
Corrective Actions
Reference
Page
–
Unable to continue the job as the
memory is used up.
Press [Continue] to print the scanned
pages. The print job cannot be
processed completely.
Press [Cancel] to cancel the job.
—
–
The process cannot be performed
due to insufficient memory. If only
[End] is available, press [End]. The
job will be canceled.
—
Paper jam.
–
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch panel.
Leave the machine on and follow the
instruction to remove the jammed
paper.
10-15
Removable memory
error.
–
This job is canceled. Press [End].
—
Removable memory
is full.
–
This job is canceled. Press [End].
—
Replace all originals
and press [Continue].
–
Remove originals from the document
processor, put them back in their
original order, and place them again.
Press [Continue] to resume printing.
Press [Cancel] to cancel the job.
2-34
10
Replace the waste
toner box.
–
The waste toner box is full. Replace
the waste toner box.
9-8
Remove originals in
the document
processor.
Are there any originals left in
the document processor?
Remove originals from the document
processor.
—
Scanner memory is
full.
–
Scanning cannot be performed due
to insufficient memory of scanner.
Only one copy of the scanned pages
is available. Press [Continue] to print,
send or store the scanned pages.
Press [Cancel] to cancel the printing
job.
—
Send error.
–
An error has occurred during
transmission.Refer to Responding to
Send Error for the error code and
corrective actions.
10-11
Set the waste toner
box.
–
The waste toner box is not installed
correctly. Set it correctly.
9-8
10-9
Troubleshooting
Error Message
Checkpoints
Corrective Actions
Reference
Page
Staple jam.
–
If a staple jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch panel.
Leave the machine on and follow the
instruction to remove the jammed
staple.
—
System error.
–
System error has occurred. Confirm
that the Attention indicator is lighting,
and then turn the main power switch
off and on.
—
The phone receiver is
off the hook.
–
Put down the receiver.
—
The removable
memory is not
formatted.
Is the removable memory
formatted by this machine?
Use the removable memory
formatted by this machine.
—
Top tray of the
machine is full of
paper.
–
Remove paper from the top tray and
press [Continue].
—
Unknown Toner
Installed. PC
Is the unauthorized product
installed?
Install our genuine product that is
specified for this machine.
—
Warning low memory.
–
Job cannot be started. Try again later.
—
10-10
Troubleshooting
Responding to Send Error
When an error occurs during transmission, Send Error appears. Check the error code and error message below,
and follow the corresponding corrective actions.
Error
Code
1101
1102
1103
Error Message
Corrective Actions
Failed to send the e-mail.
Failed to send i-FAX.
Check the host name of the SMTP
server on the COMMAND CENTER.
Failed to send via FTP.
Check the host name of FTP.
Failed to send via SMB.
Check the host name of SMB.
Failed to send via SMB.
Check the SMB settings.
- Login user name and login
password
* If the sender is a domain user,
specify the domain name.
- Host name
- Path
Failed to send the e-mail.
Failed to send i-FAX.
Check the followings on the
COMMAND CENTER.
- SMTP login user name and login
password
- POP3 login user name and login
password
Failed to send via FTP.
Check the FTP settings.
- Login user name and login
password
* If the sender is a domain user,
specify the domain name.
- Path
- Folder share permissions of the
recipient
Failed to send via SMB.
Check the SMB settings.
- Login user name and login
password
* If the sender is a domain user,
specify the domain name.
- Path
- Folder share permissions of the
recipient
3-26
Failed to send via FTP.
Check the FTP settings.
- Path
- Folder share permissions of the
recipient
3-26
10-11
Reference Page
2-18
3-26
10
Troubleshooting
Error
Code
Error Message
Corrective Actions
Failed to send the e-mail.
Check the e-mail address.
* If the address is rejected by the
domain, you cannot send the e-mail.
3-25
Failed to send i-FAX.
Check the i-FAX address.
*If the address is rejected by the
domain, you cannot send i-FAX.
FAX System (S)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
Failed to send via SMB.
Select [On] of the SMB settings on
the COMMAND CENTER.
2-18
Failed to send the e-mail.
Select [On] of the SMTP settings on
the COMMAND CENTER.
Failed to send via FTP.
Select [On] of the FTP settings on the
COMMAND CENTER.
Failed to send i-FAX.
Select [On] of the i-FAX settings on
the COMMAND CENTER.
FAX System (S)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
1106
Failed to send the e-mail.
Failed to send i-FAX.
Check the sender address of SMTP
on the COMMAND CENTER.
2-18
1131
Failed to send via FTP.
Select [On] of the secure protocol
settings on the COMMAND
CENTER.
2-18
1132
Failed to send via FTP.
Check the followings of the FTP
server.
- Is FTPS available?
- Is the encryption available?
2-18
2101
Failed to send via SMB.
Failed to send via FTP.
Check the network and SMB settings.
Check the network and FTP settings.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
- Host name and IP address
- Port number
2-18
Failed to send the e-mail.
Failed to send i-FAX.
Check the network and COMMAND
CENTER.
- The network cable is connected.
- The hub is not operating properly.
- POP3 server name of the POP3
user
- SMTP server name
1104
1105
10-12
Reference Page
Troubleshooting
Error
Code
2102
2103
Error Message
Corrective Actions
Reference Page
Failed to send via FTP.
Check the followings of the FTP
server.
- Is FTP available?
- The server is not operating properly.
Failed to send the e-mail.
Failed to send i-FAX.
Check the network.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
2201
Failed to send the e-mail.
Failed to send via FTP.
Failed to send via SMB.
Failed to send i-FAX.
Check the network.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
–
2202
Failed to send the e-mail.
Failed to send via FTP.
Failed to send i-FAX.
2203
Failed to send via FTP.
Failed to send via SMB.
2231
Failed to send via FTP.
2204
Failed to send the e-mail.
Failed to send i-FAX.
Check the e-mail size limit of the
SMTP settings on the COMMAND
CENTER.
2-18
3101
Failed to send the e-mail.
Failed to send i-FAX.
Check the authentication methods of
both the sender and the recipient.
–
Failed to send via FTP.
Check the network.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
3201
Failed to send the e-mail.
Failed to send i-FAX.
Check the SMTP user authentication
method of the recipient.
–
5101
5102
5103
5104
7102
720f
–
Turn the main power switch off and
back on. If this error occurs several
times, make a note of the displayed
error code and contact your service
representative.
–
9181
–
The scanned original exceeds the
acceptable number of pages of 999.
Send the excess pages separately.
–
10-13
–
10
Troubleshooting
Responding to Authentication Server Connection Error
If an error occurs when connecting to the authentication server, check the error message and follow the
corresponding corrective action appears on the operation panel.
Symptom
Corrective Actions
Reference Page
Cannot connect to
authentication server.
Set machine time to match the
server’s time.
2-12
Cannot connect to
authentication server.
Check the domain name.
11-2
Check the host name.
11-2
Check the connection status with the
server.
—
Responding to an Attention Indicator Flashes
If an attention indicator flashes, press [Status/Job Cancel] to check an error message. If the message is not
indicated on the touch panel when [Status/Job Cancel] is pressed or the attention indicator flashes for 1.5
seconds, check the following.
Symptom
Cannot send fax.
Checkpoints
Corrective Actions
Reference Page
Is the modular cord
connected correctly?
Connect the modular
cord correctly.
—
Is Permitted FAX No. or
Permitted ID No.
registered correctly?
Check Permitted FAX
No. and Permitted ID
No..
FAX System (S)
Operation Guide
Chapter 6 "Registering
Permit FAX No." and
"Registering Permit ID
No."
Has a communication
error occurred?
Check error codes in the
TX/RX Result Report
and Activity Report. If
the error code starts with
"U" or "E", perform the
corresponding
procedure.
FAX System (S)
Operation Guide
Appendix
"Error Code List"
Is the destination FAX
line busy?
Send again.
—
Does the destination
FAX machine respond?
Send again.
—
Is there an error other
than above?
Contact your Service
Representative.
—
10-14
Troubleshooting
Clearing Paper Jams
Job No.: 000021
Job Name: doc200810101010
If a paper jam occurs, the touch panel will display Paper
Jam. and the machine will stop. Refer to these
procedures to remove the jammed paper.
User Name: Mike
Paper jam.
1.Remove any paper that is inside.
2.Open the fuser cover and remove
the jammed paper.
3.Open cassette 1.
4.Remove the paper.
5.Set the cassette
and close the cover.
JAM
03/05
Hold
10/10/2008
Status
10:10
Jam Location Indicators
If a paper jam occurs, the location of the jam will be displayed as the following figure with a letter corresponding
to the affected component in the machine. Clearing instructions will also be displayed.
Job No.: 000021
Job Name: doc200810101010
User Name: Mike
Paper jam.
1.Remove the paper.
2.Open the fuser cover and remove
the jammed paper.
3.Close the cover.
H
I
JAM
K
I
01/03
I
E G
E
E
I
Hold
Status
G
I
10/10/2008
10:10
I
D
D
D
E
I
F
I
F
10
A
B
C
I
I
Paper Jam
Location Indicator
Paper Jam Location
C
Reference Page
A
Cassette 1
10-16
B
Cassette 2
10-17
C
Cassette 3 or 4 (Option)
10-18
D
Multi Purpose Tray
10-19
E
Duplex unit
10-23
F
Inside the left cover 1, 3 or 4
10-22
G
Fixing unit
10-26
H
Document processor (Option)
10-28
I
Document finisher (Option)
10-29
K
Job Sparator (Option)
10-29
10-15
Troubleshooting
After you remove the jam, the machine will warm up again and the error message will be cleared. The machine
resumes with the page which jam has occurred.
Precautions with Paper Jams
•
Do not reuse jammed papers.
•
If the paper tears during removal, be sure to remove any loose scraps of paper from inside the machine.
Scraps of paper left in the machine could cause subsequent jamming.
•
Discard paper that has jammed in the optional document finisher. A page affected by a paper jam will be
printed again.
CAUTION: The fixing unit is extremely hot. Take sufficient care when working in this area, as there is
a danger of getting burned.
Cassette 1
Follow the steps below to clear paper jams in cassette 1.
1
Pull up left cover 1 lever and open the left cover 1.
2
Remove the jammed paper.
3
Pull out cassette 1.
10-16
Troubleshooting
4
Remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
5
Push cassette 1 back in place securely.
6
Press the specified position to close left cover 1.
Cassette 2
Follow the steps below to clear paper jams in cassette 2.
1
Open left cover 3.
2
Remove the jammed paper.
10-17
10
Troubleshooting
3
Pull out cassette 2.
4
Remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
5
Push cassette 2 back in place securely.
6
Close left cover 3.
Optional Cassettes 3 and 4
Follow the steps below to clear paper jams in cassettes 3 or 4 when using the optional paper feeder.
1
Open left cover 4.
2
Remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
10-18
Troubleshooting
3
Pull out the cassette in use.
4
Remove the jammed paper.
5
Push the cassette back in place securely.
6
Close left cover 4.
Multi Purpose Tray
Follow the steps below to clear paper jams in the multi purpose tray.
1
Remove all papers from the multi purpose tray.
2
If paper is jammed inside, pull the paper toward you
to remove.
10-19
10
Troubleshooting
3
Pull up left cover 1 lever and open the left cover 1.
4
Remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
5
Open the feed guide B1.
6
Remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
10-20
Troubleshooting
7
Pull out cassette 1.
8
Turn the lower green knob (B2) to the left at least
10 times.
9
Remove the jammed paper.
If you cannot remove the paper, proceed with the
next step.
10
10 Pull out paper feed unit (B3).
10-21
Troubleshooting
11 Open paper feed unit cover (B4) and remove the
jammed paper.
12 Push paper feed unit (B3) back in place, and push
the cassette back in place securely.
13 Press the specified position to close left cover 1.
Inside the Left Covers 1, 3 and 4
Follow the steps below to clear paper jams inside left cover 1, 3 or 4 when using the optional paper feeder.
1
Open the left cover where the paper is jammed
inside.
2
Remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
3
10-22
Close the left cover.
Troubleshooting
Duplex Unit
Follow the steps below to clear paper jams in the duplex unit.
1
Pull up left cover 1 lever and open the left cover.
2
Remove the jammed paper.
10
3
10-23
Press the specified position to close left cover 1.
Troubleshooting
Duplex Unit and Cassette 1
Follow the steps below to clear paper jams in duplex unit and cassette 1.
1
Pull up left cover 1 lever and open the left cover.
2
Remove the jammed paper.
3
Press the specified position to close left cover 1.
4
If the left cover 2 indicator is flashing, open left
cover 2.
10-24
Troubleshooting
5
Remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
6
Close the left cover 2.
7
Pull out cassette 1 and remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
8
Push cassette 1 back in place securely.
10
10-25
Troubleshooting
Fixing unit
Follow the steps below to clear paper jams in the fixing unit.
1
Pull up left cover 1 lever and open the left cover 1.
2
Remove the jammed paper.
3
Open the fuser cover (A1).
CAUTION: The fixing unit is extremely hot. Take
sufficient care when working in this area, as there is a
danger of getting burned.
10-26
Troubleshooting
4
Remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
5
If jammed paper is seen through the paper ejection
slot, pull it toward your side to remove it.
6
Push fuser cover back in place, and press the
specified position to close left cover 1.
10
10-27
Troubleshooting
Optional Document Processor
Follow the steps below to clear paper jams in the optional document processor.
1
Remove the original from the original tray.
2
Open the document processor top cover.
3
Remove the jammed original.
If the original tears, remove every loose scrap from
inside the machine.
If the original is difficult to remove, turn the dial. The
original will scroll out to a position where it can be
removed easily.
If the original tears, remove every loose scrap from
inside the machine.
10-28
Troubleshooting
4
Lift up reverse unit.
5
Remove the jammed original.
If the original tears, remove every loose scrap from
inside the machine.
6
Put reverse unit back in its original place and close
the document processor top cover.
7
Reload the originals on the document processor
tray.
10
Optional Document Finisher
If a misfeed occurs in the optional document finisher, refer to the respective Operation Guides to clear the jam.
Optional Job Separator
Follow the steps below to clear paper jams in the optional job separator.
1
If jammed paper is seen through the paper ejection
slot of the job separator, pull it toward your side to
remove it.
If the paper tears, remove every loose scrap from
inside the machine.
10-29
Troubleshooting
2
Pull up left cover 1 lever and open left cover 1.
3
Press the lever and open the job separator.
4
Remove the jammed paper.
If the paper tears, remove every loose scrap from
inside the machine.
5
10-30
Press the indicated position to close left cover 1.
11 Management
This chapter explains the following operations.
•
•
•
User Login Administration.................................................................11-2
Job Accounting ...............................................................................11-14
Data Security Kit Operations...........................................................11-27
11-1
Management
User Login Administration
User login administration specifies how the user access is administered on this machine. Enter correct login user
name and password for user authentication to login.
Access are in three levels - User, Administrator, and Machine Administrator. The security levels can be modified
only by the machine administrator.
First User Login Administration
Follow these steps for the first user login administration.
Enable user login administration. (page 11-2)

Add a user.(page 11-5)

Log out.(page 11-4)

The registered user logs in for operations.(page 11-3)
Enabling/Disabling User Login Administration
This enables user login administration. Select one of the following authentication methods:
Item
Description
Local Authentication
User authentication based on user properties on the local
user list stored in the machine.
Network Authentication
User authentication based on Authentication Server. Use a
user property stored in Authentication Server to access the
network authentication login page.
Use the procedure below to enable user login administration.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of User Login Setting and then
[Change] of User Login.
11-2
Management
5
User Login/Job Accounting - User Login
User login administration.
Select authentication method.
Select [Local Authentication] or [Network
Authentication]. Select [Off] to disable user login
administration.
Off
Host Name
Local
Authentication
If you select [Network Authentication], enter the
host name (62 characters or less) and domain
name (256 characters or less) for the
Authentication Server. Select [NTLM] or [Kerberos]
as the server type.
# Keys
Domain Name
Network
Authentication
Expansion
Authentication
Server Type
NTLM
Kerberos
Cancel
OK
10/10/2008
Status
10:10
NOTE: If the login user name and password are
rejected, check the following settings.
•
Network Authentication setting of the machine
•
User property of the Authentication Server
•
Date and time setting of the machine and the
Authentication Server
If you cannot login because of the setting of the
machine, login with any administrator registered in the
local user list and correct the settings.
If the server type is [Kerberos], only domain names
entered in uppercase will be recognized.
6
Press [OK].
Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time
you use this machine.
Login
11
Use the procedure below to login.
1
Enter login user name and password.
Login to:
Local
Login
User Name
abcdef
If the screen below appears during the operations,
press [Login User Name].
Press [# Keys] to enter the login data using the
numeric keys.
# Keys
Login
Password
2
********
Enter the login user name and press [OK].
# Keys
NOTE: Refer to the Character Entry Method on
IC Card
Login
Check Counter
Status
Cancel
Appendix-7 for details on entering characters.
Login
10/10/2008
10:10
3
Press [Login Password].
Press [# keys] to enter the login data using the
numeric keys.
11-3
Management
4
Enter the login password and press [OK].
NOTE: If Job Accounting is enabled, you can browse
the number of pages printed and the number of pages
scanned by pressing [Check Counter].
If Network Authentication is selected as the user
authentication method, either Local or Network can be
selected as the authentication destination.
5
Check the login user name and password are
correct, and press [Login].
Logout
To log out the machine, press the Logout key to return
to the login user name/login password entry screen.
Auto Logout
Logout is automatically executed in the following cases:
•
When the Power key is pressed to enter the sleep
mode
•
When auto sleep is activated
•
When auto panel reset is activated
•
When auto low power mode is activated
•
When low power mode is activated by pressing the
Energy Saver key.
11-4
Management
Adding a User
This adds a new user. You can add Up to 1,000 users (including the default login user name). The table below
explains the user information to be registered.
Item
Description
User Name*
Enter the name displayed on the user list (up to 32 characters).
Login User Name*
Enter the login user name to login (up to 64 characters). The
same login user name cannot be registered.
Login Password*
Enter the password to login (up to 64 characters).
Access Level*
Select Administrator or User for user access privileges.
Account Name
Add an account where the user belongs. The user, who
registered his/her account name, can login without entering the
account ID. Refer to Job Accounting on page 11-14.
E-mail Address
The user can register his/her E-mail address. The registered
address will be automatically selected for subsequent operations
that need any E-mail function.
*
Mandatory at user registration.
NOTE: By default, one of each default user with machine administrator rights and administrator privileges is
already stored. Each user's properties are:
Machine Administrator
User Name:
DeviceAdmin
Login User Name: 25/25 ppm model : 2500, 30/30 ppm model : 3000, 40/40 ppm model : 4000,
50/40 ppm model : 5000, 55/50 ppm model : 5500
Login Password: 25/25 ppm model : 2500, 30/30 ppm model : 3000, 40/40 ppm model : 4000,
50/40 ppm model : 5000, 55/50 ppm model : 5500
Access Level:
Machine Administrator
Administrator
User Name:
Login User Name:
Login Password:
Access Level:
Admin
Admin
Admin
Administrator
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
Use the procedure below to register a new user.
1
Login as a user with administrator rights.
2
Press the System Menu key.
3
Press [User Login/Job Accounting].
4
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
11-5
11
Management
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
User:
User Name:
Change
01 User
Login User Name:
Change
Login Password:
Change
Account Name:
0099
5
Press [Next] of User Login Setting, [Register/Edit]
of Local User List, and then [Add].
6
Press [Change] of User Name.
7
Enter the user name and press [OK].
Change
**********
Access Level:
User
NOTE: Refer to the Character Entry Method on
Change
02 Account
E-mail Address:
Appendix-7 for details on entering characters.
IC Card Information:
Change
Change
Empty
abcd@efg.com
Cancel
8
Enter the login user name and E-mail address
following 6 and 7 above.
9
Press [Change] of Login Password and then
[Password].
Register
10/10/2008
Status
10:10
10 Enter the login password and press [OK].
11 Press [Confirm Password].
12 Enter the same login password to confirm and
press [OK].
13 Press [OK].
14 Press [Change] of Access Level.
15 Select the user access privilege and press [OK].
16 Press [Change] of Account Name.
17 Select the account and press [OK].
User: - Account Name
Select account to which this user will be attached.
Sort
Account Name
Name
Account ID
01 Account
00001000
02 Account
00002000
03 Account
00003000
Search(Name)
Search(ID)
1/2
Other Account
04 Account
05 Account
NOTE: Select [Name] and [ID] from the Sort pull-down
menu to sort the account list.
Press [Search(Name)] or [Search(ID)] to search by
account name or account ID.
00004000
00005000
Detail
Cancel
Status
OK
10/10/2008
10:10
18 Press [Register] to add a new user on the local user
list.
11-6
Management
Changing User Properties
User properties can be changed. Types of user properties that could be changed may be different depending
on user access privilege.
For a user with administrator rights who logs in
User properties can be changed and users can be deleted. The items, which can be added, are all able to be
changed.
Use the procedure below to change the user properties.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of User Login Setting and [Register/
Edit] of Local User List.
5
Select the user whose properties you wish to
change.
NOTE: Select [Name] and [Login Name] from the Sort
pull-down menu to sort the user list.
Press [Search(Name)] or [Search(Login)] to search by
name or login user name.
The procedure differs depending on the details to
be edited.
Changing user information
User:
User Name:
1
Press [Detail].
2
Refer to steps 6 to 17 of Adding a User to
change a user property.
3
Press [Register].
4
Press [Yes] in the registration confirmation
screen. The user information is changed.
Change
01 User
Login User Name:
Change
0099
Access Level:
abcd@efg.com
Change
Account Name:
Change
02 Account
Change
IC Card Information:
Change
Empty
Cancel
Status
Change
**********
User
E-mail Address:
Login Password:
Register
10/10/2008
10:10
11-7
11
Management
Deleting a user
1
Press [Delete].
2
Press [Yes] on the screen to confirm deletion.
The selected user will be deleted.
NOTE: The default user with administrator rights
cannot be deleted.
For a user without administrator rights who logs in
These users can partially change their own user properties including user name, login password, and E-mail
address.
Although login user name, access level, or account name cannot be changed, the users can check the present
status.
Use the procedure below to change user properties.
User:
User Name:
1
Press the System Menu key.
2
Press [User Property].
3
Refer to steps 6 to 17 of Adding a User to change
user properties.
Change
01 User
Login User Name:
Detail
0099
Account Name:
Change
IC Card Information:
Empty
Cancel
Status
Detail
02 Account
User
abcd@efg.com
Press [Detail] of Login User Name or Account
Name to check the present status.
Change
**********
Access Level:
E-mail Address:
Login Password:
Register
10/10/2008
10:10
4
11-8
Press [Register] to finalize changed user
properties.
Management
Unknown login user name Job
This specifies the behavior for handling the jobs sent with unknown login user names or User ID (i.e. unsent
IDs). If the User Login is set to invalid and Job Accounting is set to valid, follow the procedure when the Account
ID is unknown.
The table below shows the available settings.
Item
Description
Reject
The job is rejected (not printed).
Permit
The job is permitted to be printed.
Use the procedure below to process jobs sent from unknown users.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Change] of Unknown ID Job.
5
Press [Reject] or [Permit].
6
Press [OK].
11
11-9
Management
Group Authorization Settings
Set restrictions of the machine usage by each individual group registered in the authentication server.
NOTE: To use the group authorization settings, [Network Authentication] must be selected for the
authentication method in Enabling/Disabling User Login Administration on page 11-2. Select [On] for LDAP in
Protocol Detail on page 8-75.
Group Authorization
Use the group authorization. Use the procedure below.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of User Login Setting, [Next] of Group
Authorization Set., and then [Change] of Group
Authorization.
5
Press [On].
6
Press [OK].
Group List
Register the groups that is restricted the machine usage. Up to 20 groups can be individually registered. Other
users and groups belong to Others.
The table below explains the group information to be registered.
Item
Description
Group ID*
Enter the ID displayed on the group list (between 1 and 4294967295).
Group Name
Enter the name displayed on the group list (up to 32 characters).
Access Level
Select Administrator or User for group access privileges.
Print Restriction
Select whether or not to reject usage of print functions for the printer.
Print Restriction (Color)
Select whether or not to reject usage of the color print functions for the
printer.
Copy Restriction
Select whether or not to reject usage of copy functions.
Copy Restriction (Color)
Select whether or not to reject usage of the color copy functions.
11-10
Management
Item
Description
Copy Restr. (Full Color)
Select whether or not to reject usage of only the full color copy functions.
Send Restriction
Select whether or not to reject usage of the send functions.
FAX TX Restriction
Select whether or not to reject usage of the FAX transmissions.
Storing Restr. in Box
Select whether or not to reject usage of storing in the document boxes.
Storing Restr. in Memory
Select whether or not to reject usage of storing in the removable memory.
*
For Group ID, specify PrimaryGroupID assigned by ActiveDirectory of Windows. If you are using Windows
Server 2008, check Attribute Editor tab of user properties. If you are using Windows Server 2000/2003,
check ADSIEdit. ADSIEdit is a support tool included on the installation CD-ROM for Windows Server OS
(under \SUPPORT\TOOLS).
Use the procedure below.
User Login/Job Accounting - Group List
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of User Login Setting, [Next] of Group
Authorization Set., [Register/Edit] of Group List,
and then [Add].
Register the groups that is restricted the machine usage. (Maximum: 20)
Group ID
Group Name
Others
11
Add
Detail
Delete
Cancel
Register
2008/10/10
Status
10:10
Group:xxx
Group ID:
Change
Group Name:
Change
Access Level:
Change
Print Restriction:
Change
Print Restriction (Color):
Change
Copy Restriction:
Change
Copy Restriction (Color):
Change
Copy Restr. (Full Color):
Change
Send Restriction:
Change
5
Press [Change] of Group ID.
6
Enter the group ID and press [OK].
7
Press [Change] of Group Name.
8
Enter the group name and press [OK].
NOTE: Refer to the Character Entry Method on
1/2
Appendix-7 for details on entering characters.
Cancel
Status
Register
2008/10/10
10:10
9
11-11
Press [Change] of Access Level.
Management
10 Select the user access privilege and press [OK].
11 Press [Change] of Print Restriction.
12 Select [Reject Usage] or [Off] and press [OK].
13 Follow steps 11 and 12 above to set Print
Restriction (Color), Copy Restriction, Copy
Restriction (Color), Copy Restr. (Full Color), Send
Restriction, FAX TX Restriction, Storing Restr. in
Box, and Storing Restr. in Memory.
14 Press [Register] to add a new group on the group
list.
Obtain Network User Property
Set the required information to obtain the network user property from the LDAP server.
NOTE: To obtain the network user property from the LDAP server, [Network Authentication] must be selected
for the authentication method in Enabling/Disabling User Login Administration on page 11-2.
The table below explains the required information to be registered.Use the procedure below.
Item
Description
Server Name*1
Enter the LDAP server name or the IP address (up to 64 characters).
Port
Set the LDAP port number or use the default port 389.
Name 1*2
Enter the LDAP Attribute to obtain the user name to be displayed from the
LDAP server (up to 32 characters).
Name 2*3
Enter the LDAP Attribute to obtain the user name to be displayed from the
LDAP server (up to 32 characters).
E-mail Address*4
Enter the LDAP Attribute to obtain the e-mail address from the LDAP server (up
to 32 characters).
Search Timeout
Set the amount of time to wait before time-out in seconds (from 5 to 255
seconds).
LDAP Security
Select the type of encryption according to the type of security employed by the
LDAP server.
*1
*2
*3
*4
If using Active Directory of Windows, the server name may be same as the server name entered in the
network authentication.
If using Active Directory of Windows, displayName of Attribute may be used as Name 1.
Name 2 can be left out. When you assign displayName in Name 1 and department in Name 2, and if the
value of displayName is "Mike Smith" and the value of department is "Sales" in Active Directory of Windows,
the user name appears as Mike Smith Sales.
If using Active Directory of Windows, mail of Attribute may be used as E-mail Address.
11-12
Management
User Login/Job Accounting - Network User Property
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of User Login Setting, [Change] of
Obtain NW User Property.
5
Press [On].
6
Press [Server Name].
7
Enter the LDAP server name or the IP address and
press [OK].
8
Press [# keys] to enter the LDAP port number using
the numeric keys.
9
Press [Name 1].
Get the network user information.
Off
LDAP Server Information:
Server Name
Port:
On
192.181.11.11
389
# Keys
30 sec.
Acquisition of User Information:
Name 1
Search
Timeout
displayName
Off
Name 2
E-mail Address
LDAP
Security
mail
Cancel
Status
OK
10/10/2008
10:10
10 Enter the LDAP Attribute to obtain the user name to
be displayed and press [OK].
11 Follow steps 9 and 10 above to set Name 2.
12 Press [E-mail Address].
13 Enter the LDAP Attribute to obtain the e-mail
address and press [OK].
14 Press [Search Timeout] to set the amount of time to
wait before time-out.
15 Press [+], [-] or the numeric keys to enter the time.
16 Press [LDAP Security] to select the type of
encryption according to the type of security
employed by the LDAP server.
17 Select [Off], [LDAP over SSL], or [LDAPv3/TLS]
and press [OK].
11-13
11
Management
Job Accounting
Job accounting Manages the copy/print count accumulated by individual accounts by assigning an ID to each
account.
Job accounting helps the following activities in business organizations.
•
Manageability of up to 1,000 individual accounts.
•
Availability for account IDs with as many as eight digits (between 0 and 99999999) for security.
•
Integrated management of printing and scanning statistics through the use of an identical account ID.
•
Tracking the print volume for each account and for all accounts combined.
•
Restricting the print counter in one-page increments up to 9,999,999 copies.
•
Resetting the print counter for each account or for all accounts combined.
First Job Accounting Setup
Follow these steps for the first job accounting setup.
Enable job accounting. (page 11-14)

Add an account. (page 11-16)

Log out. (page 11-15)

Other users login for operations. (page 11-15)
Enabling/Disabling Job Accounting
Enable job accounting. Use the procedure below to specify the job accounting setting.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of Job Accounting Setting, and then
[Change] of Job Accounting.
5
Press [On]. To disable job accounting, press [Off].
11-14
Management
6
Press [OK].
NOTE: When the display returns to the System Menu
default screen, logout is automatically executed and
the screen to enter the Account ID appears. To
continue the operation, enter the Account ID.
Login/Logout
If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Use the procedure below to login and logout.
Login
1
Enter the account ID.
In the screen below, enter the account ID using the
numeric keys and press [Login].
NOTE: If you entered a wrong character, press the
Clear key and enter the account ID again.
********
If the entered account ID does not match the registered
ID, a warning beep will sound and login will fail. Enter
the correct account ID.
Check Counter
Status
Login
10/10/2008
10:10
By pressing [Counter Check], you can refer to the
number of pages printed and the number of pages
scanned.
When the screen to enter the login user name and
password appears
If user login administration is enabled, the screen to
enter the login user name and password appears. Enter
a login user name and password to login. (Refer to
Login/Logout on page 11-3.) If the user has already
registered the account information, the account ID entry
would be skipped. (Refer to Adding a User on page 115.)
2
Proceed to complete the rest of the steps.
Logout
When the operations are complete, press the Logout
key to return to the account ID entry screen.
11-15
11
Management
Adding an Account
This section explains how to add a new account. The following entries are required.
Item
Description
Account Name
Enter the account name (up to 32 characters).
Account ID
Enter the account ID as many as eight digits (between 0 and
99999999).
Restriction
This Prohibits printing/scanning or restricts the number of sheets to
load. Refer to Restricting the Use of the Machine on page 11-18.
Use the procedure below to register a new account.
Account: xx
Account Name:
Change
01 Account
Account ID:
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of Job Accounting Setting, [Register/
Edit] of Accounting List, and then [Add].
5
Press [Change] of Account Name.
6
Enter the account name and press [OK]. The
Account screen reappears.
Change
00001000
Copy Restriction (Total):
Change
Off
Copy Restr. (Full Color):
Change
NOTE: Refer to the Character Entry Method on
Print Restr. (Full Color):
Appendix-7 for details on entering characters.
Change
Off
Change
1/2
Off
Cancel
Status
Change
Off
Off
Copy Restr. (SingleColor):
Print Restriction (Total):
Register
10/10/2008
10:10
7
Follow steps 5 and 6 above to enter the Account ID.
NOTE: Any account ID that has already registered
cannot be used. Enter any other account ID.
8
Activate or deactivate restriction. Refer to
Restricting the Use of the Machine on page 11-18.
9
Press [Register] to add a new account on the
Account List.
11-16
Management
Managing Accounts
This changes the registered account information or deletes the account.
Use the procedure below to manage accounts.
User Login/Job Accounting - Accounting List
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of Job Accounting Setting and then
[Register/Edit] of Accounting List.
5
Select an account to change or delete.
Register an account that is permitted to use this machine. (Maximum: 1000)
Sort
Account Name
Name
Account ID
01 Account
00001000
02 Account
00002000
03 Account
00003000
Search(Name)
Press [Search(Name)] or [Search(ID)] to search by
account name or account ID.
Search(ID)
1/2
Add
04 Account
00004000
05 Account
00005000
Detail
NOTE: Select [Name] or [ID] from the Sort pull-down
menu to sort the account names.
The procedure differs depending on the details to
be edited.
Delete
Close
10/10/2008
Status
10:10
Changing account information
Account: xx
Account Name:
1
Press [Detail].
2
Refer to steps 5 to 7 of Adding an Account and
steps 2 to 5 of Restricting Using the Machine
to change account information.
3
Press [Register].
4
Press [Yes] in the registration confirmation
screen. The account information is changed.
Change
01 Account
Account ID:
Change
00001000
Copy Restriction (Total):
Change
Print Restriction (Total):
Change
Print Restr. (Full Color):
Off
Copy Restr. (Full Color):
Off
Off
Copy Restr. (SingleColor):
Change
Off
Change
1/2
Off
Cancel
Status
Change
Register
10/10/2008
10:10
Deleting an account
11-17
1
Press [Delete].
2
Press [Yes]. To delete the account.
11
Management
Managing the Copier/Printer Counts
You can select how the copying and printing page counts are shown - either the total of both or each of copying
and printing individually. The selection may influence restriction on the count and count method. Refer to
Restricting the Use of the Machine on page 11-18, Counting the Number of Pages Printed on page 11-23 and
Printing an Accounting Report on page 11-26 for details.
Use the procedure below to set the counting methods.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of Job Accounting Setting, [Next] of
Default Setting and then [Change] of Copier/Printer
Count.
5
Press [Total] or [Split].
6
Press [OK].
Restricting the Use of the Machine
This section explains how to restrict the use of the machine by account or the number of sheets available.
The items that can be restricted differ depending on whether [Split] or [Total] is selected for Managing the
Copier/Printer Counts on page 11-18.
Restriction Items
 [Split] selected for Copier/Printer Count
Item
Detail
Copy Restriction (Total)
Limits the total number of sheets used for full-color, singlecolor, and black and white copying.
Copy Restr. (Full Color)
Limits the number of sheets used for full-color copying.
Copy Restr. (SingleColor)
Limits the number of sheets used for single-color copying.
Print Restriction (Total)
Limits the total number of sheets used for color and black and
white printing.
Print Restr. (Full Color)
Limits the number of sheets used for color printing.
Scan Restriction (Others)
Limits the number of sheets scanned (excludes copying).
11-18
Management
Item
Detail
FAX TX Restriction
Limits the number of sheets sent by fax. This is displayed
when the optional fax kit is installed.
FAX Port Restriction
Restricts the ports used for faxing. This is displayed when two
optional FAX kits are installed.
 [Total] selected for Copier/Printer Count
Item
Detail
Print Restriction (Total)
Limits the total number of sheets used for copying and
printing.
Print Restr. (Full Color)
Limits the number of sheets used for full-color printing.
Print Restr. (SingleCol.)
Limits the number of sheets used for single-color printing.
Scan Restriction (Others)
Limits the number of sheets scanned (excludes copying).
FAX TX Restriction
Limits the number of sheets sent by fax. This is displayed
when the optional fax kit is installed.
FAX Port Restriction
Restricts the ports used for faxing. This is displayed when two
optional FAX kits are installed.
Applying Restriction
Restriction can be applied in two modes as follows:
Item
Description
11
Off
No restriction given
Counter Limit
Restricts the print counter in one-page increments up to
9,999,999 copies.
Reject Usage
Restriction is applied.
*Select [Off], [Use Port 1 Only] or [Use Port 2 Only] as the FAX Port Restriction setting.
Use the procedure below to select a restriction method.
1
Follow steps 1 to 4 of Adding an Account on page
11-16.
2
Press [Change] for the item to be restricted.
11-19
Management
3
Account:** - Copy Restriction (Total)
Restrict use of the functions.
Select the restriction mode.
If [Counter Limit] is selected, press [+],[-] or
numeric keys to select the number of pages.
Limit
Off
(1 - 9999999)
Counter Limit
99999
page(s)
Reject Usage
Cancel
Status
OK
10/10/2008
10:10
4
Press [OK].
5
Repeat steps 2 to 4 for other accounts to be
restricted.
6
Press [Register]. The restricted account is added.
Applying Limit of Restriction
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Item
*
Description
Immediately *
Job stops when the counter reaches its limit.
Subsequently
Printing/scanning of the job continues but the subsequent job
will be rejected.
Alert Only
Job continues while displaying an alert message.
The next job will be prohibited in sending or in storing in the box.
Use the procedure below to apply the restriction limit.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of Job Accounting Setting, [Next] of
Default Setting and then [Change] of Apply Limit.
5
Select [Immediately], [Subsequently], or [Alert
Only].
6
Press [OK].
11-20
Management
Default Counter Limit
When you add a new account, you can change the default restrictions on the number of sheets used.
You can set any number from 1 to 9,999,999 in 1-sheet increments.
The items that can be set differ depending on whether [Split] or [Total] is selected for Managing the Copier/
Printer Counts on page 11-18.
Available Settings
 [Split] selected for Copier/Printer Count
Item
Detail
Copy Restriction (Total)
Sets the default restriction on the number of sheets used for
color and black and white copying.
Copy Restr. (Full Color)
Sets the default restriction on the number of sheets used for
full-color copying.
Copy Restr. (SingleColor)
Sets the default restriction on the number of sheets used for
single-color copying.
Print Restriction (Total)
Sets the default restriction on the total number of sheets used
for color and black and white printing.
Print Restr. (Full Color)
Sets the default restriction on the number of sheets used for
color printing.
Scan Restriction (Others)
Sets the default restriction on the number of sheets used for
scanning (excludes copying).
FAX TX Restriction
Sets the default restriction on the number of sheets used for
sending faxes. This is displayed when the optional fax kit is
installed.
 [Total] selected for Copier/Printer Count
Item
Detail
Print Restriction (Total)
Sets the default restriction on the total number of sheets used
for copying and printing.
Print Restr. (Full Color)
Sets the default restriction on the number of sheets used for
full-color printing.
Print Restr. (SingleCol.)
Sets the default restriction on the number of sheets used for
single-color printing.
Scan Restriction (Others)
Sets the default restriction on the number of sheets used for
scanning (excludes copying).
FAX TX Restriction
Sets the default restriction on the number of sheets used for
sending faxes. This is displayed when the optional fax kit is
installed.
11-21
11
Management
Use the procedure below to specify the counter limits.
User Login/Job Accounting - Copy Restriction (Total)
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter a login user
name and password, and press [Login]. For this,
you need to login with administrator privileges.
Refer to Adding a User on page 11-5 for the default
login user name and password.
4
Press [Next] of Job Accounting Setting, [Next] of
Default Setting and then [Next] of Default Counter
Limit.
5
Press [Change] for the item you want to modify and
then press [+] or [-] or use the numeric keys to enter
the default restriction on the number of sheets.
6
Press [OK].
7
To set another default restriction, repeat steps 5 to
6.
Set the default limit value for restricting use of the functions for each account
by counter.
(1 - 9999999)
9999999
Cancel
Status
OK
10/10/2008
10:10
11-22
Management
Counting the Number of Pages Printed
This counts the number of pages printed. Counts are classified into Total Job Accounting and Each Job
Accounting. A new count can also be started after resetting the count data which was stored for a certain period
of time.
Types of the counts are as follows.
Item
Printed Pages
Detail
Displays the number of pages copied and printed, and the total
number of pages used. You can also use [Count by Paper Size] and
[Count by Duplex/Combine] to check the number of pages used.
•
For copying, you can check the pages used for black and white,
full-color and single-color copying as well as the total pages
used.
•
For printing, you can check the pages used for black and white
and full-color printing as well as the total pages used.
•
You can use [Count by Paper Size] to check the number of
pages used in the paper size set in Counting by Paper Size on
page 11-25 as well as the number of pages used in other paper
sizes.
•
You can use the [Count by Duplex/Combine] to check the
number of pages used in Duplex (1-sided) mode, Duplex (2sided) mode and the total for both, as well as the pages used in
Combine (None) mode, Combine (2in1) mode, Combine (4in1)
mode and the total for all three.
Scanned Pages
Displays the number of pages scanned for copying, faxing* and
other functions, as well as the total number of pages scanned.
FAX Transmission Pages*
Displays the number of pages faxed.
FAX Transmission Time*
Displays the total duration of fax transmissions.
*
Only displayed when the optional fax kit is installed.
Total Job Accounting/Resetting the Counter
This counts the number of pages for all accounts and resets the counts for those accounts together at the same
time.
Use the procedure below to check and reset the counter.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
11-23
11
Management
User Login/Job Accounting - Total Job Accounting
Printed Pages:
Check
FAX Transmission Time:
2
Press [Next] of Job Accounting Setting and then
[Next] of Total Job Accounting.
5
Press [Check] at the function to check the count.
The results will be displayed.
6
Confirm the count and press [Close].
7
Press [Execute] of Counter Reset to reset the
counter.
8
Press [Yes] on the screen to confirm the reset. The
counter is reset.
Check
Scanned Pages:
FAX Transmission Pages:
4
00:00:10
Counter Reset:
Execute
Close
10/10/2008
Status
10:10
Each Job Accounting/Resetting the Counter
This counts the number of pages for each account and resets the counts by account.
Use the procedure below to display and reset the counter.
User Login/Job Accounting - Each Job Accounting
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of Job Accounting Setting and [Check]
of Each Job Accounting.
5
Select the account to check the count.
Maintain a separate counter for each account (department).
Sort
Account Name
06 Account
Name
Account ID
00006000
Search(Name)
NOTE: Select [Name] or [ID] from the Sort pull-down
menu to sort the account names.
Press [Search(Name)] or [Search(ID)] to search by
account name or account ID.
Search(ID)
2/2
6
Detail
Close
Status
10/10/2008
10:10
11-24
Press [Detail].
Management
Account:
Printed Pages:
Scanned Pages:
Check
FAX Transmission Pages:
Press [Check] at the function to check the count.
The results will be displayed.
8
Confirm the count and press [Close].
9
Press [Execute] of Counter Reset to reset the
counter.
Check
FAX Transmission Time:
2(20)
7
0:00:10
Counter Reset:
10 Press [Yes] on the screen to confirm the reset. The
Execute
counter will be reset.
Close
10/10/2008
Status
10:10
Counting by Paper Size
This counts the number of pages by paper size (e.g. Letter).
NOTE: Paper size is available in five types, - 1 to 5. These types are specified in accounting reports. Refer to
Printing an Accounting Report on page 11-26.
In addition to paper size, media type can also be specified (e.g. count the letter-size color paper used). If no
media type is specified, usage is counted for all media types of that size.
Use the procedure below to count the number of pages.
User Login/Job Accounting - Paper Size 1
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of Job Accounting Setting, [Next] of
Default Setting, [Change] of Count by Paper Size,
[Change] of Paper Size 1 to 5 and then [On].
5
Select the paper size.
6
Press [Media Type] to specify media type.
7
Select the media type and press [OK].
8
Press [Close].
Select the paper sizes and types to count.
Off
On
A3
A4
A5
B4
B5
Folio
Ledger
Legal
Letter
Statement
Plain
Media Type
Cancel
Status
OK
10/10/2008
10:10
11-25
11
Management
Printing an Accounting Report
Total pages counted at all relevant accounts can be printed as an accounting report.
Reports have different formats depending on how the count of copiers and printers is administered.
When Split is selected for Managing the Copier/Printer Count
ACCOUNT.REPORT
TASKalfa xxxxx
Firmware Version
For the count by paper size, the report will be printed by size.
Use the procedure below to print a job accounting report.
1
Check that Letter or A4 paper is loaded in the
cassette.
2
Press the System Menu key.
3
Press [User Login/Job Accounting].
4
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
5
Press [Next] of Job Accounting Setting and then
[Print] of Print Accounting Report.
6
Press [Yes] on the screen to confirm the printing.
11-26
Management
Unknown Account ID Jobs
The behavior of the machine when it receives a job from unknown account ID (i.e. unsent ID) can be specified.
Refer to Unknown login user name Job on page 11-9 for details.
Checking and Printing Counter
Press the Counter key to check the number of sheets
printed and scanned.
Counter
Printed Pages
Copy
Printer
FAX
Total
Black&White:
300
600
100
1000
Full Color:
200
500
100
800
SingleColor:
100
100
0
200
Total:
600
1200
200
2000
You can check the number of pages printed in each
paper size by pressing [Printed Pages by Paper Size].
Scanned Pages
Copy
Originals:
Print
Status Page
Others
FAX
600
200
Total
1000
Printed Pages
by Paper Size
Status
1800
Close
10/10/2008
10:10
Data Security Kit Operations
Installing the optional Data Security Kit adds [Data Security] on the System Menu.
Refer to the Data Security Kit (E) Operation Guide on the bundled CD-ROM for descriptions of the [Data
Security] options and the procedures for using them.
11
11-27
Management
11-28
Appendix
•
•
•
•
•
Optional Equipment ...............................................................Appendix-2
Character Entry Method.........................................................Appendix-7
Paper ...................................................................................Appendix-10
Specifications .......................................................................Appendix-18
Glossary...............................................................................Appendix-28
Appendix-1
Optional Equipment
Overview of Optional Equipment
The following optional equipment is available for the machine.
Document Processor
Document Processor
(Dual scan DP)
Document Table
Job Separator
3,000 Sheet
Document Finisher
Document Finisher
Paper Feeder
Appendix-2
3,000 Sheet
Paper Feeder
Key Counter
FAX Kit
Expansion Memory
Appendix-3
Document Processor
Automatically scans originals. Also you can perform
duplex copying and split copying.
For document processor operation, refer to Loading
Originals in the Document Processor on page 2-34.
Paper Feeder
Two additional cassettes identical to the printer’s double
cassettes can be installed in the printer. Paper capacity
and loading method are the same as Cassettes 1 and 2.
NOTE: Left cover 4 is located on the left side of the
paper feeder for use in clearing paper jams.
3,000 Sheet Paper Feeder
In addition to the printer's cassettes, you can also install
an optional 3,000 sheet paper feeder capable of holding
up to 3,000 sheets of A4 or B5 paper.
NOTE: The 3,000 sheet paper feeder features a
removable cover on the left side of the feeder (left
cover 4) for removing paper when a paper jam occurs.
Document Finisher
The document finisher holds a large quantity of finished
copies. The finisher offers a convenient means of
sorting. Sorted finished copies may also be stapled. For
further details, refer to the document finisher Operation
Guide.
3,000 Sheet Document Finisher
This is a large-capacity document finisher capable of
holding large print runs and of separating and offsetting
multiple copies of a printout into individual copies. It can
also staple or hole-punch (optional) the offset printouts.
For details, refer to the 3,000 Sheet Document Finisher
Operation Guide. A mail box and folding unit are also
available as options.
Appendix-4
Job Separator
Separate paper according to output tray for easier
sorting. Specify as the output tray for copy or print jobs.
Or, specify as the default output tray for printing from
the copy or Document Box screen, printing from the PC,
and printing of the received fax data.
There is a paper indicator in the front of the machine
that shows whether there is paper in the Job Separator.
CAUTION: Note that some paper types have a
tendency to curl and may jam in the paper eject unit.
If the ejected paper slips or stacks unevenly, turn the
paper in the cassette over and try again.
NOTE:
•
To ensure that paper is delivered to the Job
Separator, select the output destination or change
the default setting. (For details, refer to the Paper
Output on page 8-14.)
•
When removing paper from the Job Separator, pull
it out at an angle.
Key Counter
Use the key counter to monitor machine usage. The key
counter offers a convenient solution for centralized
management of copy volume for different departments
in a large company.
Inserting the Key Counter
Insert the key counter securely into the key counter slot.
NOTE: When the key counter function is activated,
copies can only be made when a key counter is
inserted. If the key counter is not inserted, Insert key
counter. will be displayed.
Appendix-5
FAX Kit
By installing the FAX kit, fax send/receive is enabled. Also, it is possible to use it as a network fax, by using it
with a computer. When two FAX kits are installed, the units can be connected to two different telephone lines
which will enable quicker message transmission to a number of recipients. If one of the lines is dedicated to
receiving, the busy line time can be reduced. For further details, refer to Fax Kit Operation Guide.
Expansion Memory
Image storage memory (128 MB) that allows the machine to receive more pages of incoming faxed originals.
Expansion memory should only be installed or removed by the service representative.
Data Security Kit
The Data Security Kit overwrites all unnecessary data in the storage area of the hard disk so that it cannot be
retrieved. The Data Security Kit encrypts data before storing it in the hard disk. It guarantees higher security
because no data cannot be decoded by ordinary output or operations.
Printed Document Guard Kit
This prevents the unauthorized copying and/or transmission of documents that contain important confidential or
personal information. When a document is printed from a computer, this feature imprints a special pattern on
the document. When anyone attempts to copy or send that document on this machine, the machine detects the
pattern and protects the information by printing the document in blank, prohibiting transmission.
Document Table
Place original or other documents when using the machine. It has a drawer to accommodate clips.
Appendix-6
Character Entry Method
To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained
below.
NOTE: QWERTY, QWERTZ and AZERTY are available as keyboard layouts the same as a PC keyboard.
Press the System Menu key, [Common Settings] and then [Change] of Keyboard Layout to choose desired
layout. QWERTY layout is used here as an example. You may use another layout following the same steps.
Entry Screens
Lower-case Letter Entry Screen
2
1
Use the keyboard to enter.
Limit: 128 characters
Input: 0 characters
Backspace
1
2
q
3
w
a
6
4
e
s
z
r
d
x
Upper-case
5
t
f
c
7
y
g
v
Lower-case
6
u
h
b
8
i
j
n
No./Symbol
9
0
o
k
m
!
p
l
=
[
;
,
.
]
No.
\
/
Space
OK
10/10/2008
Display/Key
5
:
Cancel
8
9
10
10:10
11
Description
1
Display
Displays entered characters.
2
Limit Display
Displays maximum number of characters.
3
Cursor Key
Press to move the cursor on the display.
4
[Backspace]
Press to delete a character to the left of the
cursor.
5
Keyboard
Press a character to enter.
6
[Upper-case]
Press to use upper-case letters.
7
[Lower-case]
Press to use lower-case letters,
8
[No./Symbol]
Press to enter numbers and symbols.
9
[Space]
Press to insert a space.
Appendix-7
4
^
Status
7
3
No.
Display/Key
Description
10
[Cancel]
Press to cancel entered characters and return
to the screen before the entry.
11
[OK]
Press to finalize entry and return to the screen
before the entry.
Upper-case Letter Entry Screen
Use the keyboard to enter.
Limit: 128 characters
Input: 0 characters
Backspace
!
@
Q
#
W
A
S
Z
Upper-case
$
E
%
R
D
X
F
C
Lower-case
Lower-case
^
T
G
V
&
Y
H
B
*
U
J
N
(
I
)
O
K
M
No./Symbol
L
<
_
P
:
>
+
{
˜
}
|
"
?
Space
Cancel
OK
10/10/2008
Status
10:10
Number/Symbol Entry Screen
Use the keyboard to enter.
Limit: 128 characters
Input: 0 characters
Backspace
1
2
3
4
5
6
7
8
9
0
!
"
#
$
%
&
’
(
)
*
+
,
-
.
/
:
;
<
=
>
?
@
[
\
]
^
_
`
{
|
}
˜
Upper-case
Lower-case
Lower-case
No./Symbol
Space
Cancel
OK
10/10/2008
Status
No.
12
Display/Key
[
12
]/[
]
10:10
Description
To enter a number or symbol not shown in the
keyboard, press the cursor key and scroll the
screen to view other numbers or symbols to
enter.
Appendix-8
Entering Characters
Follow the steps shown below to enter List A-1 for example.
1
Press [Upper-case].
2
Press [L]. The letter L is shown on the display.
3
Press [Lower-case].
4
Press [i], [s], [t] and [Space].
5
Press [Upper-case].
6
Press [A].
7
Press [No./Symbol].
8
Press [ ] or [ ] repeatedly to view the keyboard
containing [-] and [1].
9
Press [-] and [1].
Use the keyboard to enter.
Limit: 128 characters
Input: 1 characters
L
Backspace
!
@
Q
#
W
A
$
E
S
%
R
D
Z
X
T
F
C
&
Y
G
V
Lower-case
Lower-case
Upper-case
^
*
U
H
B
(
I
J
N
)
O
K
M
_
P
L
<
+
{
:
>
˜
}
|
"
?
Space
No./Symbol
Cancel
OK
10/10/2008
Status
10:10
Use the keyboard to enter.
Limit: 128 characters
Input: 4 characters
List
Backspace
1
2
q
3
w
a
4
e
s
z
r
d
x
Upper-case
5
t
f
c
7
y
g
v
Lower-case
6
u
h
b
8
i
j
n
0
o
k
m
No./Symbol
9
p
l
,
!
[
;
.
=
`
]
\
’
/
@
_
Space
Cancel
OK
10/10/2008
Status
10:10
Use the keyboard to enter.
Limit: 128 characters
Input: 8 characters
List_A-1
Backspace
1
2
$
%
&
’
;
<
=
>
|
}
Upper-case
3
4
5
6
7
8
9
0
(
)
*
+
,
-
.
/
:
?
@
[
\
]
^
_
`
{
"
#
˜
Lower-case
Lower-case
No./Symbol
Space
Cancel
Status
!
OK
10/10/2008
10:10
10 Check that the entry is correct. Press [OK].
Appendix-9
Paper
This section explains the paper sizes and types that can be used in the paper source.
Cassettes 1
Supported types
Supported paper sizes
No. of sheets
Plain paper (60 to 163 g/m2)
Recycled paper (60 to 163 g/m2)
Letter, Letter-R, Statement, A4, A4-R, B5,
B5-R, A5-R, Folio, 16K, 16K-R
500 (80 g/m2)
Plain paper (60 to 163 g/m2)
Recycled paper (60 to 163 g/m2)
Ledger, Legal, A3, B4, Oficio II,
8.5 × 13.5", 8K
250 (80 g/m2)
Cassettes 2 and the optional paper feeder
Supported types
Plain paper (60 to 163 g/m2)
Recycled paper (60 to 163 g/m2)
Supported paper sizes
Ledger, Legal, Letter, Letter-R, Statement,
A3, B4, A4, A4-R, B5, B5-R, A5-R, Oficio II,
8.5 × 13.5", Folio, 8K, 16K, 16K-R
No. of sheets
500 (80 g/m2)
Optional 3,000 sheet paper feeder
Supported types
Plain paper (60 to 105 g/m2)
Recycled paper (60 to 105 g/m2)
Supported paper sizes
Letter, A4, B5
No. of sheets
3,000 (80 g/m2)
Multi Purpose tray (MP tray)
Supported types
Plain paper (60 to 220 g/m2)
Recycled paper (60 to 220 g/m2)
Colored paper (60 to 220 g/m2)
Supported paper sizes
Letter, Letter-R, Executive-R, Statement,
A4, A4-R, B5, B5-R, A5-R, B6-R, A6-R,
Folio, 16K, 16K-R
No. of sheets
100 (80 g/m2)
Other sizes:
Portrait - 3 7/8 to 11 5/8" or 98 to 297 mm
Landscape - 5 7/8 to 17" or 148 to 432 mm
Plain paper (60 to 220 g/m2)
Recycled paper (60 to 220 g/m2)
Colored paper (60 to 220 g/m2)
Ledger, Legal, A3, B4, Oficio II,
8.5 × 13.5", 8K
50 (80 g/m2)
Postcards
Oufuku Hagaki (return postcard)
Postcards (100 × 148 mm)
Return postcard (148 × 200 mm)
30
Appendix-10
Supported types
Supported paper sizes
No. of sheets
Envelopes
Envelope DL, Envelope C5, Envelope C4,
Envelope #10 (Commercial #10),
Envelope #9 (Commercial #9),
Envelope #6 (Commercial #6 3/4),
Monarch, ISO B5, Youkei 2, Youkei 4
Other sizes:
Portrait - 3 7/8 to 11 5/8" or 98 to 297 mm
Landscape - 5 7/8 to 17" or 148 to 432 mm
10
Transparency (OHP film)
Letter, Letter-R, A4, A4-R
10
Basic Paper Specifications
This machine is designed to print on standard copy paper as used in regular ('dry') copiers and page printers
such as laser printers. It also supports a variety of other types of paper that conform to the specifications given
in this appendix.
Be careful when choosing paper. Paper unsuitable for the machine may cause jams or may be wrinkled.
Supported Paper
Use standard copy paper for regular copiers or laser printers. The printing quality will be affected by the quality
of paper. Poor quality paper may result in unsatisfactory output.
Basic Paper Specifications
The following table lists the specifications of paper that is supported with this machine. Refer to the subsequent
sections for further details.
Criteria
Weight
Specifications
Cassettes: 60 to 163 g/m2
Multi purpose tray: 60 to 220 g/m2
Thickness
0.086 to 0.110 mm
Dimensional accuracy
±0.7 mm
Squareness of corners
90° ±0.2°
Moisture content
4 to 6%
Grain direction
Long grain (paper supply direction)
Pulp content
80% or more
NOTE: Some recycled paper does not meet requirements for use with this machine as listed in the Basic
Paper Specifications shown below, such as moisture or pulp content. For this reason, we recommend
purchasing a small amount of recycled paper as a sample for testing prior to use. Choose recycled paper that
gives the best printing results and contains low levels of paper dust.
We are not responsible for the problems occurred from the use of paper that does not conform to our
specifications.
Appendix-11
Choosing the Appropriate Paper
This section describes guidelines for choosing paper.
Condition
Avoid using paper with bent corners or that is curled, dirty, or torn. Do not use paper that has a rough surface or
paper fiber lint, or that is especially delicate. Use of paper in any of these conditions will not only deliver poor
copies but may also cause jams and shorten the useful life of the machine. Choose paper with a smooth and even
surface; however, avoid coated paper or paper with a treated surface as it may damage the drum or fusing unit.
Ingredient
Do not use paper such as paper that has been coated or surface-treated or paper that contains plastic or carbon.
These paper may produce harmful fumes from the heat of printing and may damage the drum.
Be sure to use the standard paper that contains at least 80% pulp, i.e., not more than 20% of the total paper
content consists of cotton or other fibers.
Supported Paper Sizes
Paper of the following sizes is supported by the machine.
Measurements in the table take into account a ±0.7 mm dimensional accuracy for length and width. Corner
angles must be 90° ± 0.2°.
Multi Purpose Tray
Cassette or Multi Purpose Tray
A6-R (105 × 148 mm)
A3 (297 × 420 mm)
B6-R (128 × 182 mm)
B4 (257 × 364 mm)
Hagaki (100×148mm)
A4 (297 × 210 mm)
Oufuku Hagaki (148 × 200 mm)
A4-R (210 × 297 mm)
Executive (7 1/4 ×10 1/2")
B5 (257 × 182 mm)
Envelope DL (110 × 220 mm)
B5-R (182 × 257 mm)
Envelope C5 (162 × 229mm)
A5-R (148 × 210 mm)
Envelope C4 (229 × 324mm)
Folio (210 × 330 mm)
ISO B5 (176 × 250 mm)
Ledger
Envelope #10 (Commercial #10) (4 1/8 × 9 1/2")
Legal
Envelope #9 (Commercial #9) (3 7/8 × 8 7/8")
Letter
Envelope #6 (Commercial #6 3/4) (3 5/8 × 6 1/2")
Letter-R
Envelope Monarch (3 7/8 ×7 1/2")
Statement-R
Youkei 2 (114 × 162 mm)
Oficio II
Youkei 4 (105 × 235 mm)
8.5 × 13.5"
Appendix-12
Multi Purpose Tray
Size Entry (98 × 148 to 297 × 432 mm)
Cassette or Multi Purpose Tray
8K (273 × 394 mm)
16K (273 × 197 mm)
16K-R (197 × 273 mm)
Smoothness
The paper surface should be smooth, but it must be uncoated. With paper that is too smooth and slippery,
several sheets may accidentally be supplied at once, causing jams.
Basis Weight
In countries that use the metric system, basis weight is the weight in grams of one sheet of paper one square
meter in area. In the United States, basis weight is the weight in pounds of one ream (500 sheets) of paper cut
to the standard size (or trade size) for a specific grade of paper. Paper that is too heavy or too light may be
supplied incorrectly or cause paper jams, which may cause excessive wear of the machine. Mixed paper weight
(i.e., thickness) may cause several sheets to be supplied at once accidentally and may also cause blurring or
other printing problems if the toner fails to adhere correctly.
Thickness
Avoid using paper that is too thick or thin. Signs that paper may be thin include frequent problems with paper
jams or with several sheets being supplied at once. Paper jams may also indicate that the paper is too thick. The
proper thickness is between 0.086 and 0.110 mm.
Moisture Content
Paper moisture content is the ratio of moisture to dryness expressed as a percentage. Moisture affects how the
paper is supplied, the electrostatic changeability of the paper, and how the toner adheres.
Paper moisture content varies depending on the relative humidity in the room. High relative humidity causes
paper to become damp, making the edges expand so it appears wavy. Low relative humidity causes paper to
lose moisture, making the edges tighten and weakening print contrast.
Wavy or tight edges may cause the paper to slip when it is supplied. Try to keep the moisture content between
4 to 6%.
To maintain the right level of moisture content, bear in mind the following considerations.
•
Store paper in a cool, well-ventilated place.
•
Store paper flat and unopened in the package. Once the package is opened, reseal it if the paper is not to
be used for a while.
•
Store paper sealed in the original package and box. Put a pallet under the carton to keep it raised above the
floor. Especially during rainy seasons keep the paper a sufficient distance away from wooden or concrete
floors.
•
Before using paper that has been stored, keep it at the proper moisture level for at least 48 hours.
•
Do not store paper where it is exposed to heat, sunlight, or dampness.
Appendix-13
Other Paper Specifications
Porosity: The density of the paper fibers
Stiffness: Paper must be stiff enough or it may buckle in the machine, causing jams.
Curl: Most paper naturally tends to curl after the package is opened. When paper passes through the fixing unit,
it curls upward slightly. To deliver flat printouts, load the paper so that the curl faces towards the bottom of the
paper tray.
Static electricity: During printing, paper is electrostatically charged so that the toner adheres. Choose paper
that can be discharged quickly so that copies do not cling together.
Whiteness: Paper whiteness affects print contrast. Use whiter paper for sharper, brighter copies.
Quality: Machine problems may occur if sheet sizes are not uniform or if corners are not square, edges are
rough, sheets are uncut, or edges or corners are crushed. In order to prevent these problems, be especially
careful when you cut the paper yourself.
Packaging: Choose paper that is properly packaged and stacked in boxes. Ideally, the packaging itself should
have been treated with a coating to inhibit moisture.
Specially treated paper: We do not recommend printing onto the following types of paper, even if it conforms to
the basic specifications. When you use these kinds of paper, purchase a small amount first as a sample to test.
•
Glossy paper
•
Watermarked paper
•
Paper with an uneven surface
•
Perforated paper
Special Paper
This section describes printing onto special paper and print media.
The following paper and media can be used.
•
Transparencies
•
Preprinted paper
•
Bond paper
•
Recycled paper
•
Thin paper (from 60 g/m2 to 64 g/m2 or less)
•
Letterhead
•
Colored paper
•
Prepunched paper
•
Envelopes
•
Cardstocks (Hagaki)
•
Thick paper (from 106 g/m2 to 200 g/m2 or less)
•
Labels
•
Coated paper
•
High-quality paper
When using these paper and media, choose that are designed specifically for copiers or page printers (such as
laser printers). Use the multi purpose tray for transparencies, thick paper, envelopes, cardstocks, and label paper.
Appendix-14
Choosing Special Paper
Although special paper that meets the following requirements can be used with the machine, print quality will
vary considerably due to differences in the construction and quality of special paper. Thus, special paper is more
likely than regular paper to cause printing problems. Before purchasing special paper in volume, try testing a
sample to ensure the print quality is satisfactory. General precautions when printing onto special paper are given
below. Note that we are not responsible for any harm to the user or damage to the machine caused by moisture
or specifications of special paper.
Select a cassette or multi purpose tray for special paper.
Transparencies
Transparencies must be able to withstand the heat of printing. Transparencies must meet the following
conditions.
Criteria
Specifications
Heat resistance
Must withstand at least 190°C
Thickness
0.100 to 0.110 mm
Material
Polyester
Dimensional accuracy
±0.7 mm
Squareness of corners
90° ±0.2°
To avoid problems, use the multi purpose tray for transparencies and load transparencies with the long side
facing the machine.
If transparencies jam frequently at output, try pulling the leading edge of sheets gently as they are ejected.
Hagaki
Burrs
Burrs
Before loading Hagaki into the multi purpose tray, fan
them and align the edges. If the Hagaki paper is curled,
straighten it before loading. Printing onto curled Hagaki
may cause jams.
Use unfolded Oufuku Hagaki (available at post offices).
Some Hagaki may still have rough edges developed by
a paper cutter on the back side. Remove any such
rough edges by placing the Hagaki on a flat surface and
rubbing the edges gently a few times with a ruler.
Envelopes
Use the multi purpose tray for envelopes.
Due to the structure of envelopes, printing evenly over the entire surface may not be possible in some cases.
Thin envelopes in particular may be wrinkled by the machine in some cases as they pass through. Before
purchasing envelopes in volume, try testing a sample to ensure the print quality.
Storing envelopes for a long period may cause them to become wrinkled. Thus, keep the package sealed until
you are ready to use them.
Appendix-15
Keep the following points in mind.
Do not use envelopes with exposed adhesive. In addition, do not use the type of envelope in which the adhesive
is exposed after the top layer is peeled off. Serious damage may be caused if the paper covering the adhesive
comes off in the machine.
Do not use envelopes with certain special features. For example, do not use envelopes with a grommet for
winding a string to close the flap or envelopes with an open or film-covered window.
If paper jams occur, load fewer envelopes at once.
To prevent paper jams when printing onto multiple envelopes, do not allow more than ten envelopes remain in
the output tray at once.
Thick Paper
Before loading thick paper in the multi purpose tray, fan it and align the edges. Some thick paper may still have
rough edges developed by a paper cutter on the back side. Remove any such rough edges just as with Hagaki
by placing the paper on a flat surface and rubbing the edges gently a few times with a ruler. Printing onto paper
with rough edges may cause jams.
NOTE: If the paper is not supplied correctly even after it is smoothed, load the paper in the multi purpose tray
with the leading edge raised a few millimeters.
Label
Be sure to feed labels from the multi purpose tray.
For selecting labels, use extreme care so that the adhesive may not come in direct contact with any part of the
machine and that the labels are not easily peeled from the carrier sheet. Adhesives that stick to the drum or
rollers and peeled labels remaining in the machine may cause a failure.
When printing onto labels, you must be liable for the print quality and possible trouble.
Top sheet
Adhesive layer
Carrier sheet
Labels consist of three layers as shown in the
illustration. The adhesive layer contains materials that
are easily affected by the force applied in the machine.
The carrier sheet bears the top sheet until the label is
used. This composition of labels may cause more
problems.
The label surface must be covered completely with the
top sheet. Gaps between labels may cause peeling of
labels, resulting in a serious failure.
Appendix-16
Some label paper has large margins on the top sheet. When using such paper, do not peel these margins from
the carrier sheet before completing output.
Allowed
Not allowed
Top sheet
Carrier sheet
Use label paper that conforms to the following specifications.
Item
Specifications
Top sheet weight
44 to 74 g/m²
Basis weight
(overall paper weight)
104 to 151 g/m²
Top sheet thickness
0.086 to 0.107 mm
Overall paper thickness
0.115 to 0.145 mm
Moisture content
4 to 6 % (composite)
Colored Paper
Colored paper must conform to the specifications listed on the page 2 of the Appendix. In addition, the pigments
in the paper must be able to withstand the heat of printing (up to 200°C or 392°F).
Preprinted Paper
Preprinted paper must conform to the specifications listed on the page 2 of the Appendix. The colored ink must
be able to withstand the heat of printing. It must be resistant to silicone oil as well. Do not use paper with a
treated surface such as glossy paper used for calendars.
Recycled Paper
Recycled paper must conform to the specifications listed on the page 2 of the Appendix; however, its whiteness
may be considered separately.
NOTE: Before purchasing recycled paper in volume, try testing a sample to ensure that the print quality.
Appendix-17
Specifications
NOTE: Specifications are subject to change without notice.
Machine
Item
Description
Type
Desktop
Printing Method
Electrophotography by semiconductor laser, tandem drum system
Supported Original Types
Sheet, Book, 3-dimensional objects (maximum original size: 11 × 17"/
A3)
Original Feed System
Fixed
Paper Weight
Cassette
1, 2
60 to 163 g/m2 (Duplex: 60 to 163 g/m2)
Multi Purpose
Tray
60 to 220 g/m2
Cassette
1, 2
Plain, Rough, Vellum, Recycled, Preprinted, Bond, Color (Colour),
Prepunched, Letterhead, Thick, High Quality, Custom 1 to 8 (Duplex:
Same as Simplex)
Multi Purpose
Tray
Plain, Transparency (OHP film), Rough, Vellum, Labels, Recycled,
Preprinted, Bond, Cardstock, Color (Colour), Prepunched, Letterhead,
Thick, Coated, Envelope, High Quality, Custom 1 to 8
Cassette
1, 2
Maximum: 11 × 17"/A3 (Duplex: 11 × 17"/A3)
Minimum: 5 1/2 × 8 1/2"/A5R (Duplex: 5 1/2 × 8 1/2"/A5R)
Multi Purpose
Tray
Maximum: 11 × 17"/A3
Minimum: 5 1/2 × 8 1/2"/A6R
Paper Type
Paper Size
Zoom Level
Manual mode: 25 to 400%, 1% increments
Auto mode: Preset Zoom
Appendix-18
Item
Description
Printing
Speed
Black and White copying
Full color copying
A4/Letter
25 sheets/min
25 sheets/min
A4-R/Letter-R
17 sheets/min
17 sheets/min
A3/Ledger
13 sheets/min
13 sheets/min
B4/Legal
13 sheets/min
13 sheets/min
B5
25 sheets/min
25 sheets/min
A4/Letter
30 sheets/min
30 sheets/min
A4-R/Letter-R
20 sheets/min
20 sheets/min
A3/Ledger
15 sheets/min
15 sheets/min
B4/Legal
15 sheets/min
15 sheets/min
B5
30 sheets/min
30 sheets/min
A4/Letter
40 sheets/min
40 sheets/min
A4-R/Letter-R
27 sheets/min
27 sheets/min
A3/Ledger
19 sheets/min
19 sheets/min
B4/Legal
19 sheets/min
19 sheets/min
B5
40 sheets/min
40 sheets/min
A4/Letter
50 sheets/min
40 sheets/min
A4-R/Letter-R
33 sheets/min
27 sheets/min
A3/Ledger
25 sheets/min
19 sheets/min
B4/Legal
25 sheets/min
19 sheets/min
B5
50 sheets/min
40 sheets/min
When the Document Finisher is not installed:
When the 3,000 Sheet Document Finisher is installed:
A4/Letter
55 sheets/min
50 sheets/min
A4-R/Letter-R
37 sheets/min
33 sheets/min
A3/Ledger
28 sheets/min
25 sheets/min
B4/Legal
28 sheets/min
25 sheets/min
B5
55 sheets/min
50 sheets/min
When the Document Finisher is installed:
A4/Letter
50 sheets/min
50 sheets/min
A4-R/Letter-R
37 sheets/min
33 sheets/min
A3/Ledger
28 sheets/min
25 sheets/min
B4/Legal
28 sheets/min
25 sheets/min
B5
50 sheets/min
50 sheets/min
25/25 ppm
model
30/30 ppm
model
40/40 ppm
model
50/40 ppm
model
55/50 ppm
model
First Print
Time
(A4, feed from
Cassette)
Black and
White
25/25 ppm model: 6.2 seconds or less
30/30 ppm model: 6.2 seconds or less
40/40 ppm model: 5.3 seconds or less
50/40 ppm model: 4.9 seconds or less
55/50 ppm model: 4.6 seconds or less
Full color
25/25 ppm model: 8.1 seconds or less
30/30 ppm model: 8.1 seconds or less
40/40 ppm model: 6.9 seconds or less
50/40 ppm model: 6.9 seconds or less
55/50 ppm model: 6.1 seconds or less
Appendix-19
Item
Warm-up Time
(22°C/71.6°F,
60%)
Paper
Capacity
Output Tray
Capacity
Description
Power on
25/25 ppm model: 30 seconds or less
30/30 ppm model: 30 seconds or less
40/40 ppm model: 45 seconds or less
50/40 ppm model: 45 seconds or less
55/50 ppm model: 57.5 seconds or less
Low Power
25/25 ppm model: 30 seconds or less
30/30 ppm model: 30 seconds or less
40/40 ppm model: 30 seconds or less
50/40 ppm model: 30 seconds or less
55/50 ppm model: 30 seconds or less
Sleep
25/25 ppm model: 30 seconds or less
30/30 ppm model: 30 seconds or less
40/40 ppm model: 45 seconds or less
50/40 ppm model: 45 seconds or less
55/50 ppm model: 57.5 seconds or less
Cassette 1
500 sheets (80 g/m2, A4/Letter or less),
250 sheets (80 g/m2, B4/Legal or more)
Cassette 2
500 sheets (80 g/m2)
Multi Purpose
Tray
100 sheets (80 g/m2, A4/Letter or less),
50 sheets (80 g/m2, more than Letter/A4)
Top tray
250 sheets (80 g/m2)
with optional
job separator
150 sheets (80 g/m2)
Continuous Copying
1 to 999 sheets
Image Write System
Semiconductor laser and electrophotography
Main Memory
Standard
2048 MB
Maximum
2048 MB
Hard Disk
Interface
25/25:80GB or more (standard)
30/30:80GB or more (standard)
40/40:160GB or more (standard)
50/40:160GB or more (standard)
55/50:160GB or more (standard)
Standard
USB Interface Connector: 1 (USB Hi-Speed)
USB memory slot: 2 (Full-Speed USB)
Network interface: 1 (10 BASE-T/100 BASE-TX)
Option
KUIO/W slot: 2
Resolution
Operating
Environment
600 × 600 dpi
Temperature
10 to 32.5°C/50 to 90.5°F
Humidity
15 to 80 %
Altitude
2,500 m/8,202 ft maximum
Brightness
1,500 lux maximum
Appendix-20
Item
Description
Dimension (W × D × H)
(Main unit only)
23 53/64 × 26 49/64 × 29 11/32"
605 × 680 × 745 mm
Weight (without toner
container and waste toner
box)
233.7 lb/106 kg
Space Required (W × D)
(Using multi purpose tray)
35 × 26 49/64"
889 × 680 mm
Power Source
120 V AC, 60 Hz, 12 A/220 to 240 V AC, 50 Hz/ 60 Hz, 7.2 A
Options
Document processor, Paper feeder, 3,000 sheet paper feeder,
Document finisher, 3,000 sheet document finisher, Job separator, Key
counter, FAX kit, Expansion memory, Data Security Kit, Printed
Document Guard Kit
Printer
Item
Printing Speed
First Print
Time
(A4, feed
from
Cassette)
Description
Same as Copying Speed.
Black and
White
25/25 ppm model : 9.4 seconds or less
30/30 ppm model : 9.4 seconds or less
40/40 ppm model : 7.1 seconds or less
50/40 ppm model : 5.8 seconds or less
55/50 ppm model : 5.2 seconds or less
Full color
25/25 ppm model : 10.9 seconds or less
30/30 ppm model : 10.9 seconds or less
40/40 ppm model : 8.1 seconds or less
50/40 ppm model : 8.1 seconds or less
55/50 ppm model : 6.7 seconds or less
Resolution
600 dpi
Operating System
Windows 2000 (Service Pack 2 or later), Windows XP, Windows Server
2003, Windows Vista, Windows 7 , Windows Server 2008, Apple
Macintosh OS 10.x
Interface
USB Interface Connector: 1 (USB Hi-Speed)
Network interface: 1 (10 BASE-T/100 BASE-TX)
Standard
Page Description Language
PRESCRIBE
Appendix-21
Scanner
Item
Description
System requirements
CPU: 600Mhz or higher
RAM: 128MB or more
Resolution
600 dpi, 400 dpi, 300 dpi, 200 dpi, 200 ×100 dpi, 200 × 400 dpi
(Resolution in FAX mode included)
File Format
TIFF (MMR/JPEG compression), JPEG, XPS, PDF (MMR/JPEG
compression), PDF (high compression)
Scanning Speed *1
25/25 ppm model
30/30 ppm model
1-sided B/W 50 Images/min
Color 50 Images/min
2-sided B/W 60 Images/min
Color 60 Images/min
(A4 landscape, 300 dpi,
Image quality: Text/Photo original)
40/40 ppm model
50/40 ppm model
55/50 ppm model
1-sided B/W 75 Images/min
Color 75 Images/min
2-sided B/W 100 Images/min
Color 100 Images/min
(A4 landscape, 300 dpi,
Image quality: Text/Photo original)
Interface
Ethernet (10 BASE-T/100 BASE-TX)
Network Protocol
TCP/IP
Transmission
System
PC transmission
*1
*2
*3
SMB
Scan to SMB
FTP
Scan to FTP, FTP over SSL
E-mail transmission SMTP Scan to E-mail
TWAIN scan*2
WIA scan*3
When using the dual scan document processor (except TWAIN and WIA scanning)
Available Operating System : Windows 2000 (Service Pack 2 or later), Windows XP, Windows Server 2003,
Windows Vista, Windows 7, Windows Server 2008
Available Operating System : Windows Vista, Windows 7, Windows Server 2008
Appendix-22
Document Processor (option)
Item
Description
Original Feed
Method
Automatic feed
Supported
Original Types
Sheet originals
Paper Size
Maximum: Ledger/A3
Minimum: Statement-R/A5-R
Paper Weight
45 to 160 g/m2
Loading Capacity
100 sheets (50 to 80 g/m2) maximum
Mixed original sizes (auto selection): 30 sheets (50 to 80 g/m2) maximum
Dimensions
(W) × (D) × (H)
22 23/32 × 21 13/64 × 7 5/64"
577 × 534 × 180 mm
Weight
14 kg or less
Dual scan DP model: 14 kg or less
Paper Feeder (option)
Item
Description
Paper Supply
Method
Friction Feed (No. Sheets: 500, 80 g/m2, 2 cassettes)
Paper Size
Ledger, Legal, Oficio II, 8.5×13.5", Letter, Letter-R, Executive, Executive-R,
Statement-R, A3, B4, A4, A4-R, B5-R, A5-R, Folio, 8K, 16K, 16K-R
Supported Paper
Paper weight: 60 - 163 g/m2
Media types: standard, recycled, color
Dimensions
(W) × (D) × (H)
23 1/32 × 24 1/2 × 12 13/32"
585 × 622.5 × 315 mm
Weight
Approx. 45.2 lbs. / Approx. 20.5 kg
3,000 Sheet Paper Feeder (option)
Item
Description
Paper Supply
Method
Friction Feed (No. Sheets: 3,000 (80 g/m2))
Paper Size
A4, B5, Letter
Supported Paper
Paper weight: 60 - 105 g/m2
Media types: standard, recycled, color
Appendix-23
Item
Description
Dimensions
(W) × (D) × (H)
23 5/16 × 23 5/8 × 12 23/64"
585 × 600 × 314 mm
Weight
Approx. 50.71 lbs / Approx. 23 kg
Document Finisher (option)
Item
Description
Number of Trays
1 tray
Paper Size
(Non-stapling)
Ledger, Legal, Oficio II, 8.5×13.5", A3, B4, Folio, 8K: 500 sheets
Letter, Letter-R, A4, A4-R, B5, B5-R, 16K: 1,000 sheets
Supported Paper
Weight
Stapling: 90 g/m2 or less
Maximum Sheets
for Stapling
Ledger, Legal, Oficio II, 8.5×13.5", A3, B4, 8K: 25 sheets
Letter, Letter-R, A4, A4-R, B5, B5-R, 16K: 50 sheets (Paper weight 90 g/m2 or less)
Dimensions
(W) × (D) × (H)
25 × 20 63/64 × 40 5/16"
634.9 × 533 × 1013.5 mm
Weight
Approx. 58.42 lbs. / Approx. 26.5 kg
3,000 Sheet Document Finisher (option)
Item
Description
Number of Trays
3 trays
Paper
Size
Tray A
(NonStapling)
Ledger, Legal, A3, B4, 8K: 1,500 sheets
Letter, Letter-R, A4, A4R, B5, 16K: 3,000 sheets
Tray B
Folio, Ledger, Legal, 12×18", A3, B4, 8K: 100 sheets
Letter, Letter-R, Statement-R, A4, A4R, B5, B5R, A5, A5R, 16K, 16KR: 200 sheets
Tray C
Letter, Statement-R, A4, B5, A5, A5R, 16K: 50 sheets
Supported Paper
Weight
Stapling: 90 g/m2 or less
Maximum Sheets
for Stapling
A3, B4, Ledger, Legal, Oficio II, 8.5×13.5", Folio, 8K: 30 sheets
A4, A4-R, B5, Letter, Letter-R, 16K: 50 sheets
(Paper weight 90 g/m2 or less)
Dimensions
(W) × (D) × (H)
27 1/2 × 22 9/16 × 42 13/16"
687 × 573 × 1087mm
Weight
121.3 lbs or less / 55 kg or less
Appendix-24
Job Separator (option)
Item
Description
Number of Trays
1 tray
Maximum Sheets
100 sheets (80 g/m2)
Paper Size
Ledger, Legal, Oficio II, 8.5×13.5", Letter, Letter-R, Executive, Executive-R,
Statement-R, A3, B4, A4, A4-R, B5, B5-R, A5-R, Folio, 8K, 16K, 16K-R
Paper Type
Paper weight: 60 - 163 g/m2
Paper type: plain, recycled, color, vellum
Dimensions
(W) × (D) × (H)
22 29/64 × 22 29/64 × 9 26/64"
570 × 570 × 240 mm
Weight
5.1 lbs. or less / 2.3 kg or less
Appendix-25
Environmental Specifications (25/25 ppm model and 30/30 ppm model)
Item
Description
Nose emission
Power
consumption*1
During copying
During copying
25/25 ppm model
30/30 ppm model
Black & White
66.2 dB(A) (Lwad)
67.1 dB(A) (Lwad)
Color
66.4 dB(A) (Lwad)
67.0 dB(A) (Lwad)
Black & White
710 W or less
(120V)
730 W or less
(120V)
760 W or less
(230V)
790 W or less
(230V)
800 W or less
(120V)
810 W or less
(120V)
860 W or less
(230V)
870 W or less
(230V)
Color
During stanby
160 W or less
During Low Power Mode
100 W or less
Recovery time from Low Power
Mode
30 seconds or less
Time to Low Power Mode
3 minutes
During sleep
16 W or less
Recovery time from sleep
30 seconds or less
Time to sleep
30 minutes
During Plugged-in Mode*2
1W or less
Duplexing
*1
*2
Standard
Factory default
Power consumption in Plugged-in Mode can only be terminated by removing the power plug from
the outlet.
Appendix-26
Environmental Specifications (40/40 ppm model and 50/40 ppm model)
Item
Description
Nose emission
Power
consumption*1
During copying
During copying
(with full optional
equipment)
40/40 ppm model
50/40 ppm model
Black & White
68.0 dB (A) (Lwad)
69.5 dB (A) (Lwad)
Color
68.2 dB (A) (Lwad)
68.3 dB (A) (Lwad)
Black & White
980 W or less
(120V)
1110 W or less
(120V)
1000 W or less
(230V)
1130 W or less
(230V)
Color
1130 W or less (120V)
1150 W or less (230V)
During stanby
210 W or less
During Low Power Mode
130 W or less
Recovery time from Low Power
Mode
30 seconds or less
Time to Low Power Mode
3 minutes
During sleep
19 W or less
Recovery time from sleep
45 seconds or less
Time to sleep
45 minutes
During Plugged-in Mode*2
1W or less
Duplexing
*1
*2
60 minutes
Standard
Factory default
Power consumption in Plugged-in Mode can only be terminated by removing the power plug from
the outlet.
NOTE: Consult your dealer or service representative for recommended paper types.
“Maschinenlärminformations-Verordnung - 3.GPSGV, der höchste Schalldruckpegel beträgt 70 dB(A) oder
weniger gemäß EN ISO 7779”.
Das Gerät ist nicht für die Benutzung am Bildschirmarbeitsplatz gemäß BildscharbV vorgesehen.
Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im unmittelbaren
Gesichtsfeld platziert werden.
Appendix-27
Glossary
Accessibility
The machine is designed featuring good accessibility even for the elderly and those who are physically
challenged or visually impaired. Touch panel characters can be enlarged while the touch panel is adjustable in
two angles.
AppleTalk
AppleTalk, which comes with Apple Computer's Mac OS, is a network protocol. AppleTalk enables file/printer
sharing and also enables you to utilize application software that is on another computer on the same AppleTalk
network.
Auto Form Feed Timeout
During data transmission, the machine may sometimes have to wait until receiving the next data. This is the auto
form feed timeout. When the preset timeout passes, the machine automatically put paper out. However, no
output is performed if the last page has no data to be printed.
Auto Paper Selection
A function to automatically select paper in the same size as original at printing
Auto Sleep
A mode designed for electrical power saving, activated when the machine is left unused or data transfer for a
specific period. In Sleep mode, power consumption is kept to a minimum.
Bonjour
Bonjour, also known as zero-configuration networking, is a service that automatically detects computers,
devices and services on an IP network. Bonjour, because an industry-standard IP protocol is used, allows
devices to automatically recognize each other without an IP address being specified or DNS server being set.
Bonjour also sends and receives network packets by UDP port 5353. If a firewall is enabled, the user must check
that UDP port 5353 is left open so that Bonjour will run correctly. Some firewalls are set up so as to reject only
certain Bonjour packets. If Bonjour does not run stably, check the firewall settings and ensure that Bonjour is
registered on the exceptions list and that Bonjour packets are accepted. If you install Bonjour on Windows XP
Service Pack 2 or later, the Windows firewall will be set up correctly for Bonjour.
Default Gateway
This indicates the device, such as a computer or router, that serves as the entrance/exit (gateway) for accessing
computers outside the network that you are on, When no specific gateway is designated for a destination IP
address, data is sent to the host designated as the Default Gateway.
DHCP (Dynamic Host Configuration Protocol)
Dynamic Host Configuration Protocol (DHCP) that automatically resolves IP addresses, subnet masks, and
gateway addresses on a TCP/IP network. DHCP minimizes the load of network management employing a large
number of client computers because it relieves individual clients including printers from the IP address being
assigned.
Appendix-28
DHCP (IPv6)
DHCP (IPv6) is the next-generation of the Internet's Dynamic Host Configuration Protocol and supports IPv6. It
extends the BOOTP startup protocol that defines the protocols used for transferring configuration information to
hosts on the network. DHCP (IPv6) permits the DHCP server to use its expanded functionality to send
configuration parameters to an IPv6 node. Because the network addresses that can be used are allocated
automatically, the IPv6 node management workload is reduced in systems where the administrator has to
exercise close control over IP address allocation.
dpi(dots per inch)
A unit for resolution, representing the number of dots printed per inch (25.4 mm).
EcoPrint Mode
A printing mode that helps save toner. Copies made in this mode are thus lighter than normal.
Emulation
The function to interpret and execute other printers' page description languages. The machine emulates
operation of PCL6, KPDL, and KPDL (automatic).
FTP(File Transfer Protocol)
A protocol to transfer files on the TCP/IP network, whether the Internet or an intranet. Along with HTTP and
SMTP/POP, FTP is now frequently used on the Internet.
Grayscale
A computer color expression. Displayed images of this sort are typically composed of shades of gray, varying
from black at the weakest intensity to white at the strongest, without any other colors. Gray levels are displayed
in numerical levels: that is, white and black only for 1 bit; 256 gray levels (including white and black) for 8 bits;
and 65,536 gray levels for 16 bits.
Help
A Help key is provided on this machine's operation panel. If you are unsure of how to operate the machine,
would like more information on its functions or are having problems getting the machine to work properly, press
the Help key to view a detailed explanation on the touch panel.
IP Address
An Internet protocol address is a unique number that represents a specific computer or related device on the
network. The format of an IP address is four sets of numbers separated by dots, e.g. 192.168.110.171. Each
number should be between 0 and 255.
IPP
IPP (Internet Printing Protocol) is a standard that uses TCP/IP networks such as the Internet to enable print jobs
to be sent between remote computers and printers.IPP is an extension of the HTTP protocol used to view
websites and enables printing to be carried out via routers on printers in remote locations. It also supports the
HTTP authentication mechanisms along with SSL server and client authentication as well as encryption.
Appendix-29
KPDL (Kyocera Page Description Language)
Kyocera's PostScript page description language compatible with Adobe PostScript Level 3.
Multi Purpose (MP) Tray
The paper supply tray on the right side of the machine. Use this tray instead of the cassettes when printing onto
envelopes, Hagaki, transparencies, or labels.
NetBEUI (NetBIOS Extended User Interface)
An interface, developed by IBM in 1985, as an update from NetBIOS. It enables more advanced functions on
smaller networks than other protocols such as TCP/IP, etc. It is not suitable for larger networks due to lack of
routing capabilities to choose the most appropriate routes. NetBEUI has been adopted by IBM for its OS/2 and
Microsoft for its Windows as a standard protocol for file sharing and printing services.
NetWare
Novell's network management software that is able to run on a variety of operating systems.
POP3 (Post Office Protocol 3)
A standard protocol to receive E-mail from the server in which the mail is stored on the Internet or an intranet.
PostScript
A page description language developed by Adobe Systems. It enables flexible font functions and highlyfunctional graphics, allowing higher quality printing. The first version called Level 1 was launched in 1985,
followed by Level 2 that enabled color printing and two-byte languages (e.g. Japanese) in 1990. In 1996, Level
3 was released as an update for the Internet access and PDF format as well as gradual improvements in
implementation technologies.
PPM (prints per minute)
This indicates the number of A4 size printouts made in one minute.
Printer Driver
The software to enable you to print data created on any application software. The printer driver for the machine
is contained in the CD-ROM enclosed in the package. Install the printer driver on the computer connected to the
machine.
RA(Stateless)
The IPv6 router communicates (transmits) information such as the global address prefix using ICMPv6. This
information is the Router Advertisement (RA). ICMPv6 stands for Internet Control Message Protocol, and is a
IPv6 standard defined in the RFC 2463 "Internet Control Message Protocol (ICMPv6) for the Internet Protocol
Version 6 (IPv6) Specification".
Send as E-mail
A function to send the image data stored in the machine as an E-mail attachment. E-mail addresses can be
selected from the list or entered at each time.
Appendix-30
SMTP (Simple Mail Transfer Protocol)
A protocol for E-mail transmission over the Internet or an intranet. It is used for transferring mail between mail
servers as well as for sending mail from clients to their servers.
Status Page
The page lists machine conditions, such as the memory capacity, total number of prints and scans, and paper
source settings.
Subnet Mask
The subnet mask is a way of augmenting the network address section of an IP address. A subnet mask
represents all network address sections as 1 and all host address sections as 0. The number of bits in the prefix
indicates the length of the network address. The term "prefix" refers to something added to the beginning and,
in this context, indicates the first section of the IP address. When an IP address is written, the length of the
network address is indicated by the prefix length after a forward slash (/). For example, "24" in the address
"133.210.2.0/24". In this way, "133.210.2.0/24" denotes the IP address "133.210.2.0" with a 24-bit prefix
(network section). This new network address section (originally part of the host address) made possible by the
subnet mask is referred to as the subnet address.When you enter the subnet mask, be sure to set the DHCP
setting to Off.
TCP/IP (Transmission Control Protocol/Internet Protocol)
TCP/IP is a suite of protocols designed to define the way computers and other devices communicate with each
other over a network.
TCP/IP (IPv6)
TCP/IP (IPv6) is based on the current Internet protocol, TCP/IP (IPv4). IPv6 is the next-generation Internet
protocol and expands the available address space, which resolves the problem of the lack of addresses under
IPv4, while also introducing other improvements such as additional security functionality and the capacity to
prioritize data transmission.
TWAIN (Technology Without Any Interested Name)
A technical specification for connecting scanners, digital cameras, and other image equipment to the computers.
The TWAIN compatible devices enable you to process image data on any relevant application software. TWAIN
is adopted on a large amount of graphic software (e.g. Adobe Photoshop) and OCR software.
USB (Universal Serial Bus)2.0
A USB interface standard for Hi-Speed USB 2.0. The maximum transfer rate is 480 Mbps. This machine is
equipped with USB 2.0 for high-speed data transfer.
Appendix-31
WIA (Windows Imaging Acquisition)
A function to import images supported after Windows Me/XP from digital cameras and other peripheral
devices.This function replaces what TWAIN used to do; the feature is provided as a part of Windows functions
and improves ease of operation, so that you import images directly to My Computer without using any
application.
Appendix-32
Index
Index
Numerics
1-sided/2-sided Selection 5-10
3,000 sheet document finisher Appendix-4
3,000 sheet paper feeder Appendix-4
A
Accessibility 8-84, Appendix-28
Adjusting Density 5-17
Auto 3-8
Manual 3-8
Adjusting the Operation Panel Angle 2-11
Adjustment/Maintenance 8-44
Auto Color Correction 8-47
Color Calibration 8-52
Color Calibration Cycle 8-50
Color Registration 8-47
Copy Density Adjustment 8-44
Correcting Fine Black Lines 8-46
Developer Refresh 8-53
Display Brightness 8-46
Drum Refresh 8-45
Gray Adjustment 8-51
Laser Scanner Cleaning 8-53
MP Tray Cleaning 8-53, 8-54
Send/Box Density 8-45
Silent Mode 8-47
System Initialization 8-46
AppleTalk Appendix-28
Setup 2-15
Applications 8-69
Attention Indicator 1-4
Auto Image Rotation 4-37
Auto Low Power Mode 2-9
Auto Paper Selection Appendix-28
Auto Sleep 2-10, Appendix-28
B
Background density adjust
Copy 4-35
Send 5-20
Bonjour Appendix-28
Booklet from Sheets 4-18
Left side 4-18
Right side 4-18
Top binding 4-19
Border Erase
Copy 4-16
Send 5-23
Bundled Items 2-2
Buzzer 8-3
C
Calibration Cycle 8-50
Cassette
Loading Paper 2-21
Paper Size and Media Type 8-5
Cassette 1 1-4
Cassette 2 1-4
Caution Labels ix
CD-ROM 2-2
Centering 5-6
Changing Language 2-11, 8-2
Character Entry Method Appendix-7
Cleaning
Dual scanning area 9-3
Glass Platen 9-2
Original Cover 9-2
Separator 9-5
Slit Glass 9-3
Transfer Roller 9-6
Cleaning Brush 1-5
Clip Holder 1-4
Color
Background Density Adjust 4-35, 5-20
Color / Grayscale / Black and White
Selection 5-21
Color balance adjust 4-30
Color Calibration Cycle 8-50
Index-1
Index
Color Profiles 5-32
Color Registration 8-47
Color Type 5-31, 8-30, 8-31
Gray Adjustment 8-51
Hue adjust 4-31
One touch image adjust 4-33
Single Color copy 4-29
Color balance adjust 4-30
Color Calibration 8-52
Color mode 3-6
Color Selection (Copy) 8-17
Color Selection (Send/Store) 8-18
Color Toner Empty Action 8-15
Color type 5-31
Combine Mode
2-in-1 Mode 4-12
4-in-1 Mode 4-12
Page Boundary Lines 4-13
COMMAND CENTER 2-17
Connecting
LAN Cable 2-5
Power Cable 2-6
USB Cable 2-6
Connection Method 2-3
Continuous Scan
Copy 4-36
Send 5-22
Conventions in This Guide xxix
Copy Appendix-6
Adjusting Density 3-8
Collate Copying 3-14
Duplex Copying 3-12
Offset Copying 3-14
Originals 4-2
Selecting Image Quality 3-9
Setup 8-27
Zoom Copying 3-10
Copy Settings 8-27
Auto % Priority 8-28
Auto Paper Selection 8-27
Border Erase for Back Page 8-27
Paper Selection 8-27
Preset Limit 8-29
Quick Setup Registration 8-29
Reserve Next Priority 8-28
Copying Functions 4-1
Counting the Number of Pages Printed
by Paper Size 11-25
Counter 11-27
Each Job 11-24
Printing a Report 11-26
Total Job 11-23
Unknown Account ID Jobs 11-27
Counting the Number of Pages
Printed 11-23
Cover Mode 4-21
Custom Box
Creating a New Box 6-2
Deleting Documents 6-11
Editing Documents 6-8
Form Overlay 6-7
Join Documents 6-9
Move Documents 6-8
Printing Documents 6-5
Sending Documents 6-6
Storing Documents 6-4
User Privileges 3-40
D
Date/Timer 8-55
Auto Error Clear 8-58
Auto Panel Reset 8-56
Auto Sleep 8-57
Date Format 8-55
Date/Time 8-55
Low Power Timer 8-57
Setup 8-55
Time Zone 8-56
Default 8-15
Auto Image Rotation 8-22
Border Erase 8-21
Border Erase to Back Page 8-21
Collate/Offset 8-22
Color Selection (Copy) 8-17
Color Selection (Send/Store) 8-18
Color TIFF Compression Settings 8-24
Continuous Scan 8-16
Density 8-19
EcoPrint 8-23
E-mail Subject/Body 8-20
File Format 8-18, 8-19
Index-2
Index
File Name 8-20
High Comp. PDF Image 8-24
JPEG/TIFF Print 8-25
Margin 8-22
Original Image 8-17
Original Orientation 8-16
PDF/TIFF/JPEG Image 8-23
Repeat Copying 8-24
Scan Resolution 8-17
XPS Fit to Page 8-26
Zoom 8-20
Default Gateway Appendix-28
Default Screen 8-2
Density Adjustment
Copy 3-8
Send 5-17
Destination 8-60
Adding 8-60
Adding a contact 8-60
Adding a Group 8-62
Choosing by One Touch Key 3-32
Choosing by Speed Dial 3-32
Choosing from the Address Book 3-30
Editing 8-63
One Touch Key 8-64
Quick No. Search key 3-3
Search 3-31
Sending to Different Types of
Destinations (Multi Sending) 3-32
Device 7-16
Canceling FAX Communication 7-18
Checking Status 7-16
Configuring 7-17
Displaying Screen 7-16
USB Memory 7-17
DHCP Appendix-28
DHCP (IPv6) Appendix-29
Document Box 3-33, 6-1
Basic Operation 3-35
Custom Box 3-33, 6-2
Document deletion time 6-3
Form Overlay 6-7
Job Box 3-33, 6-12
Quick Setup Registration 8-33
What is Document Box? 3-33
Document Finisher Appendix-4,
Appendix-24
Document Guard 8-81
Document Processor Appendix-4,
Appendix-23
How to Load Originals 2-35
Loading Originals 2-34
Not Supported Originals 2-34
Part Names 2-34
Supported Originals 2-34
Document Table Appendix-6
Double Copy 4-27
dpi Appendix-29
Duplex 3-12, 8-37
E
EcoPrint Mode Appendix-29
Copy 4-12
Print 8-36
E-mail
Send as E-mail 3-25
Emulation Appendix-29
Selection 8-35
Energy Star Program xxvii
Enlarged Display 8-84
Enter E-mail Subject and Body 5-26
Enter key 1-3, 3-3
Entry
Body 5-26
Document Name 5-25
File Name 4-41, 5-25
Subject 5-26
Error Handling 8-12
Error Messages 10-6
Expansion Memory Appendix-6
F
File
Format 5-12
PDF 5-14
File Name 4-41
File Separation 5-13
Form Overlay 4-22
Storing a Form 6-17
Front Cover 1-4
Index-3
Index
Handles 1-4
Help Appendix-29
Host Name 8-73
HTTP
Protocol Detail 8-75
HTTPS
Protocol Detail 8-75
Hue adjustment 4-31
Canceling 3-42, 7-13
Checking History 7-9
Checking Status 7-2
Detailed Information 7-7
Detailed Information of Histories 7-10
Details of the Status Screens 7-3
Displaying History Screen 7-9
Displaying Status Screens 7-2
Pause and Resumption 7-13
Reordering 7-14
Sending the Log History 7-11
Job Accounting 11-14
Managing the Copier/Printer Counts 1118
Restricting the Use of the Machine 1118
Job Box
Form Overlay Box 6-17
Private Print/Stored Job Box 6-12
Quick Copy/Proof and Hold Print
Box 6-13
Repeat Copy Box 6-15
Job Finish Notice 5-29
Copy 4-39
Send 5-29
I
K
Image Quality
Send 5-16
Image repeat copy 4-27
Included Guides 2
Installation Precautions ix
Interface Block 8-80
Internet Browser 8-67
Interrupt Clear Timer 8-59
Interrupt Copy 3-17
IP Address Appendix-29
IPP Appendix-29
IPP over SSL
Protocol Detail 8-75
Key Counter Appendix-5
KPDL Appendix-30
FTP Appendix-29
FTP (Reception)
Protocol Detail 8-75
FTP Encrypted TX 5-31
G
Glass Platen
Cleaning 9-2
GPL xxiv
Gray Adjustment 8-51
Grayscale 5-21, Appendix-29
Green Knob 1-6
Grounding the Machine xi
H
J
Job
Available Status 7-2
L
Label Appendix-16
LAN Cable
Connecting 2-5
LAN Interface
Setup 8-79
LDAP
Protocol Detail 8-75
Left Cover 1 1-4
Left Cover 1 Lever 1-4
Left Cover 2 1-4
Left Cover 3 1-4
Legal Information xxii
Login 3-2, 11-3
Index-4
Index
Logout 3-2, 11-3
Low Power Timer 8-57
LPD
Protocol Detail 8-75
M
Main Power Switch 1-6
Management 11-1
Job Accounting 11-14
User Login Administration 11-2
Margin/Centering Mode 4-14
Memo Mode 4-24
Mirror Image 4-38
Mixed Size Originals 4-6
Combinations 4-6
Copy Size 4-8
Send 5-7
Monotype Imaging License Agreement xxvi
MP Tray Cleaning 8-53
Multi Purpose (MP) Tray 1-6, Appendix-30
Paper Size and Media 2-30, 8-6
Multi Sending (Sending to Different Types
of Destinations ) 3-32
N
Negative Image 4-37
NetBEUI Appendix-30
Protocol Detail 8-75
NetWare Appendix-30
Setup 8-76
Network
Preparation 2-13
Setup 8-73
Network Cable 2-4
Connecting 2-5
Network Interface 2-4
O
OHP backing sheet mode 4-44
One Touch Key
Changing the Registered
Information 8-65
Deleting the Registered
Information 8-65
Editing 8-65
One-touch image adjust 4-33
Open SSL xxiv
Operation Panel 1-2, 1-4
Option
3,000 sheet document finisher
Appendix-4
3,000 sheet paper feeder Appendix-4
Data Security Kit Appendix-6
Document Finisher Appendix-4
Document Processor Appendix-4
Document Table Appendix-6
Expansion Memory Appendix-6
FAX Kit Appendix-6
Job Separator Appendix-5
Key Counter Appendix-5
Overview Appendix-2
Paper Feeder Appendix-4
Option Interface Slot 1-6
Optional Functions 8-83
Orientation Confirmation 8-15
Original
Loading in the Document
Processor 2-34
Placing on the Platen 2-32
Size xxx
Original Cover 1-4
Cleaning 9-2
Original Orientation
Copy 4-9
Document Processor 4-9
Orientation Confirmation 8-15
Send 5-11
Original Placement Indicator
Indications and Status 2-35
Original Size Indicator Plates 1-4, 2-32
Original Size Selection
Send 5-2
Original SSLeay License xxv
Originals
Automatic Detection 8-9
Copy 4-2
Custom 8-4
Setup 8-4
Size Selection 4-2, 5-2
Index-5
Index
Output Destination 4-11
Output Tray 8-14
P
Page Numbering 4-23
Paper
Appropriate Paper Appendix-12
Auto Selection 8-9
Before Loading 2-20
Cassette 8-5
Checking the Remaining Amount of
Paper 7-15
Custom 8-4
Default Paper Source 8-9
Loading Envelopes 2-26
Loading in the Cassettes 2-21
Loading in the Multi Purpose Tray 2-24
Multi Purpose Tray 8-6
Paper Source for Cover Paper 8-10
Setup 8-4
Size and Media 2-28, Appendix-10
Special Paper 8-10, Appendix-14
Specifications Appendix-11
Weight 8-7
Paper Feed Unit 1-6
Paper Feeder Appendix-4
Paper Jam 10-15
Cassette 1 10-16
Cassette 2 10-17
Cassettes 3 and 4 10-18
Document Finisher 10-29
Document Processor 10-28
Duplex Unit 10-23
Duplex Unit and Cassette 1 10-24
Inside the Left Covers 1, 2 and 3 10-22
Jam Location Indicators 10-15
Multi Purpose Tray 10-19
Precaution 10-16
Paper Length Guide 2-21
Paper Selection 4-3
Cassette 4-3
Multi Purpose Tray 4-4
Paper Width Guides 2-22
Part Names 1-1
Platen 1-4
Placing Originals 2-32
POP3 Appendix-30
POP3 (E-mail RX)
Protocol Detail 8-75
Poster 4-26
PostScript Appendix-30
Power Cable
Connecting 2-6
Power Off 2-8
Power On 2-7
Power Supply xi
PPM Appendix-30
Precautions for Use xii
Preparation 2-1
Preparing Cables 2-4
Print Job
Reordering 3-43
Printed Document Guard Kit Appendix-6
Printer
Setup 8-35
Printer Driver Appendix-30
Printer Settings 8-35
Color Setting 8-36
Copies 8-37
CR Action 8-39
Duplex 8-37
EcoPrint 8-36
Emulation 8-35
Form Feed Timeout 8-38
LF Action 8-39
Orientation 8-38
Override A4/Letter 8-37
Paper Feed Mode 8-40
Printing 3-22
Printing from Applications 3-22
Printing Reports/Sending Notice 8-41
Font List 8-41
Network Status Page 8-42
Service Status Page 8-42
Status Page 8-41
Transmission Result Reports 8-42
Priority Override 4-41, 7-14
Product Library 2-2
Programmed Copying 3-46
Editing and Deleting 3-47
Recalling 3-46
Index-6
Index
Registering 3-46
Punch 3-20
Q
Quick No. Search key 1-3, 3-3
Quick Setup Screen 3-43
Changing Registration 3-44, 8-29, 8-30,
8-33
R
RA (Stateless) Appendix-30
Raw Port
Protocol Detail 8-75
Receive Indicator 1-4
Repeat Copy 4-42
Maximum Number 4-43
Outputting 4-42
Selecting 4-42
Replacement
Toner Container 9-8
Waste Toner Box 9-8
Reserve Next 3-16
Reserve Next Priority 8-28
Resolution Appendix-21
Restarting the System 8-72
S
Safety Conventions i
SAFETY OF LASER BEAM (USA) xv
Scan Resolution 5-18
Default settings 8-17
Scanner Cleaning 8-53, 8-54
Secure Protocol 8-77
Send
File Format 5-12
Image Quality 5-16
Original Size Selection 5-2
Print 5-30
Sending Size Selection 5-3
Setup 8-30
Store 5-30
Sending
Send as E-mail 3-25
Send to Folder (FTP) 3-28
Send to Folder (SMB) 3-27
Sending E-mail 2-18
Sending Functions 5-1
Sending Settings 8-30
Color Type 8-30, 8-31
Quick Setup Registration 8-30
Sending Size Selection 5-3
Sending to Different Types of Destinations
(Multi Sending) 3-32
Separator
Cleaning 9-5
Setting Date and Time 2-12
Sharpness adjust
Copy 4-34
Send 5-19
Shortcuts 3-48
Adding 3-48
Single Color copy 4-29
Sleep 2-10
Slit Glass 1-4
Cleaning 9-3
SMTP Appendix-31
SMTP (E-mail TX)
Protocol Detail 8-75
SNMP
Protocol Detail 8-75
SNMPv3
Protocol Detail 8-75
Solving Malfunctions 10-2
Specifications
Document Finisher Appendix-24
Document Processor Appendix-23
Environmental Specifications
Appendix-26
Job Separator Appendix-25
Machine Appendix-18
Paper Feeder Appendix-23
Printer Appendix-21
Scanner Appendix-22
Specifying Destination 3-29, 3-30
Status / Job Cancel 7-1
Status Page 8-41, Appendix-31
Subnet Mask Appendix-31
Supplies
Checking the Remaining Amount 7-15
Index-7
Index
Group Authorization Settings 11-10
Login 11-3
Logout 11-4
Unknown login user name Job 11-9
Switching the Language 2-11, 8-2
Switching Unit of Measurement 8-11
Symbols i
System Initialization 8-72
System Menu 8-1
W
T
TCP/IP Appendix-31
TCP/IP (IPv4)
Setup 2-13
TCP/IP (IPv6) Appendix-29
Setup 8-73
Toner Container 1-5
Checking the Remaining Amount of
Toner 7-15
Replacement 9-8
Trade Names xxiii
Transfer Roller
Cleaning 9-6
TWAIN Appendix-31
U
USB Appendix-31
USB Cable
Connecting 2-6
USB Interface 1-6, 2-4
USB Memory
Printing Documents 6-20
Removing 6-21
Saving Documents 6-22
User Login Administration 11-2
Adding 11-5
Changing Properties 11-7
Enabling/Disabling 11-2
Waste Toner Box 1-5
Replacement 9-8
Status 7-15
WIA Appendix-32
WSD Print
Setup 8-77
WSD Scan 5-27
Setup 8-76
X
XPS
File formats 5-12, 8-18
Printing documents stored in
Removable USB Memory 6-20
Saving documents to Removable USB
Memory 6-22
Z
Zoom Copying
Auto Zoom 3-10
Manual Zoom 3-10
Preset Zoom 3-10
XY Zoom 3-11
Zoom Mode
Copy 5-5
Send 5-5
Index-8
We recommend the use of our own brand supplies. We will not be liable for any damage caused by the
use of third party supplies in this machine.
A1
Rev. 1 2009.11
Printed in China 302KY56040
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement