Advertisement
Advertisement
2540
3040
Operation Guide
Please read the Operation Guide before using this machine. Keep it close to the machine for easy reference.
This Operation Guide is for models 2540 and 3040. In this guide, 2540 refers to the 25 cpm (copies per minute) model and 3040 to the 30 cpm model.
Note This Operation Guide contains information that corresponds to using both the inch and metric versions of these machines.
The inch versions of these machines are shown in the screens in this guide. If you are using the metric version, use the messages provided for the inch version as reference only. In the body text, only the inch messages are given if these versions differ only in capitalization. When there is even a slight difference in the message, we have listed the information for the inch version followed, in brackets, by the corresponding information for the metric version.
Included Guides
The following guides are included with this machine. Refer to the proper guide based on your requirements.
Operation Guide (This Guide)
Describes how to load paper, basic copy operations, and troubleshooting.
Advanced Operation Guide
Explains copying features in depth, as well as default settings.
Quick Start Guide
Lists and briefly describes the copy functions of the machine.
Safety Conventions in This Guide
Please read this Operation Guide before using the machine. Keep it close to the machine for easy reference.
The sections of this guide and parts of the machine marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the machine.
The symbols and their meanings are indicated below.
WARNING : Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance with the related points.
CAUTION : Indicates that personal injury or mechanical damage may result from insufficient attention to or incorrect compliance with the related points.
Symbols
The symbol indicates that the related section includes safety warnings. Specific points of attention are indicated inside the symbol.
.... [General warning]
.... [Warning of danger of electrical shock]
.... [Warning of high temperature]
The symbol indicates that the related section includes information on prohibited actions. Specifics of the prohibited action are indicated inside the symbol.
.... [Warning of prohibited action]
.... [Disassembly prohibited]
The z symbol indicates that the related section includes information on actions which must be performed. Specifics of the required action are indicated inside the symbol.
.... [Alert of required action]
.... [Remove the power plug from the outlet]
....
[Always connect the machine to an outlet with a ground connection]
Please contact your service representative to order a replacement if the safety warnings in this Operation Guide are illegible or if the guide itself is missing. (fee required) i
ii
Contents
Legal Information and Conventions ........................................... ix
1 Part Names .................................................................................. 1-1
Operation Panel .......................................................................... 1-5
Touch Panel ................................................................................ 1-6
2 Preparation for Usage ................................................................ 2-1
Loading Paper ............................................................................. 2-2
Setting Media Type and Paper Size for the Cassettes and MP
Loading Originals ..................................................................... 2-14
Language ................................................................................... 2-18
3 Basic Operation .......................................................................... 3-1
Basic Copying Procedures ........................................................ 3-2
Selecting Image Quality ............................................................. 3-4
Adjusting Density ....................................................................... 3-5
Duplex Mode ............................................................................. 3-10
Split Mode .................................................................................. 3-13
Collate Mode ............................................................................. 3-15
Interrupt Copy ........................................................................... 3-16
Low-Power Mode ...................................................................... 3-17
Sleep Mode ................................................................................ 3-17
4 Optional Equipment .................................................................... 4-1
Overview of Optional Equipment .............................................. 4-2
Document Processor .................................................................. 4-3
Paper Feeder ............................................................................... 4-3
Built-in Finisher .......................................................................... 4-3
Document Finisher ..................................................................... 4-6
Job Separator .............................................................................. 4-6
Key Counter ................................................................................ 4-7
Printer Kit .................................................................................... 4-7
5 Maintenance ................................................................................ 5-1
Cleaning ....................................................................................... 5-2
Toner Container and Waste Toner Box Replacement ............. 5-7
6 Troubleshooting ......................................................................... 6-1
Solving Malfunctions .................................................................. 6-2
Responding to Error Messages ................................................. 6-4
Clearing Paper Jams .................................................................. 6-8
7 Appendix ..................................................................................... 7-1
Entering Characters on Touch Panel ........................................ 7-2
Specifications ............................................................................. 7-6
Index ....................................................................................Index-1
Caution/Warning Labels
Caution labels have been attached to the machine at the following locations for safety purposes. Be sufficiently careful to avoid fire or electric shock when removing a paper jam or when replacing toner.
High temperature inside. Do not touch parts in this area, because there is a danger of getting burned.
High temperature inside. Do not touch parts in this area, because there is a danger of getting burned.
Do not incinerate toner and toner container.
Dangerous sparks may cause burn.
Do not touch the support area for the document processor as there is a danger that your fingers or other objects may become caught or pinched, and this can result in injury.
Label inside the machine (Laser radiation warning)
Moving parts inside. May cause personal injury.
Do not touch moving parts.
Note Do not remove these labels.
iii
iv
Installation Precautions
Environment
Caution
Avoid placing the machine on or in locations which are unstable or not level. Such locations may cause the machine to fall down or fall over. This type of situation presents a danger of personal injury or damage to the machine.
Avoid locations with humidity or dust and dirt. If dust or dirt become attached to the power plug, clean the plug to avoid the danger of fire or electrical shock.
Avoid locations near radiators, heaters, or other heat sources, or locations near flammable items, to avoid the danger of fire.
To keep the machine cool and facilitate changing of parts and maintenance, allow access space as shown below. Leave adequate space, especially around the rear cover, to allow air to be properly ventilated out of the machine.
3 15/16"
10 cm
15 3/4"
40 cm
11 13/16"
30 cm
39 3/8"
100 cm
Other precautions
The service environmental conditions are as follows:
• Temperature: 50 to 90.5 °F (10 to 32.5 °C)
• Humidity: 15 to 80 %
However, adverse environmental conditions may affect the image quality. Avoid the following locations when selecting a site for the machine.
• Avoid locations near a window or with exposure to direct sunlight.
• Avoid locations with vibrations.
• Avoid locations with drastic temperature fluctuations.
• Avoid locations with direct exposure to hot or cold air.
• Avoid poorly ventilated locations.
Small amounts of ozone and other chemicals are released during copying, but the quantities do not present any health risk to humans. If, however, the machine is used over a long period of time in a poorly ventilated room or when making an extremely large number of copies, the smell may become unpleasant. To maintain the appropriate environment for copy work, it is suggested that the room be properly ventilated.
Do not install this machine beneath fluorescent lights. The original size may be detected incorrectly.
Power supply/Grounding the machine
Warning
Do not use a power supply with a voltage other than that specified. Avoid multiple connections in the same outlet. These types of situations present a danger of fire or electrical shock.
Plug the power cord securely into the outlet. If metallic objects come in contact with the prongs on the plug, it may cause a fire or electric shock.
Always connect the machine to an outlet with a ground connection to avoid the danger of fire or electrical shock in case of an electric short. If an earth connection is not possible, contact your service representative.
Other precautions
Connect the power plug to the closest outlet possible to the machine.
Handling of plastic bags
Warning
Keep the plastic bags that are used with the machine away from children. The plastic may cling to their nose and mouth causing suffocation.
v
vi
Precautions for Use
Cautions when using the machine
Warning
Do not place metallic objects or containers with water (flower vases, flower pots, cups, etc.) on or near the machine. This of situation presents a danger of fire or electrical shock should they fall inside.
Do not remove any of the covers from the machine as there is a danger of electrical shock from high voltage parts inside the machine.
Do not damage, break or attempt to repair the power cord. Do not place heavy objects on the cord, pull it, bend it unnecessarily or cause any other type of damage. These types of situations present a danger of fire or electrical shock.
Never attempt to repair or disassemble the machine or its parts as there is a danger of fire, electrical shock or damage to the laser. If the laser beam escapes, there is a danger of it causing blindness.
If the machine becomes excessively hot, smoke appears from the machine, there is an odd smell, or any other abnormal situation occurs, there is a danger of fire or electrical shock. Turn the main power switch off ( position) immediately, be absolutely certain to remove the power plug from the outlet and then contact your service representative.
If anything harmful (paper clips, water, other fluids, etc.) falls into the machine, turn the main power switch off ( position) immediately. Next, be absolutely certain to remove the power plug from the outlet to avoid the danger of fire or electrical shock. Then contact your service representative.
Do not remove or connect the power plug with wet hands, as there is a danger of electrical shock.
Always contact your service representative for maintenance or repair of internal parts.
Caution
Do not pull the power cord when removing it from the outlet. If the power cord is pulled, the wires may become broken and there is a danger of fire or electrical shock. (Always grasp the power plug when removing the power cord from the outlet.)
Always remove the power plug from the outlet when moving the machine. If the power cord is damaged, there is a danger of fire or electrical shock.
Always hold the designated parts only when lifting or moving the machine.
For safety purposes, always remove the power plug from the outlet when performing cleaning operations.
If dust accumulates within the machine, there is a danger of fire or other trouble. It is therefore recommended that you consult with your service representative in regard to cleaning of internal parts.
This is particularly effective if accomplished prior to seasons of high humidity. Consult with your service representative in regard to the cost of cleaning the internal parts of the machine.
Other precautions
If the optional fax kit is installed, when the main power switch is off ( position), fax send/receive is disabled. To turn the power off, press the
Power key on the operation panel.
Do not place heavy objects on the machine or cause other damage to the machine.
Do not open the front cover, turn off the main power switch, or pull out the power plug during copying.
When lifting or moving the machine, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit boards. They could be damaged by static electricity.
Do not attempt to perform any operations not explained in this handbook.
Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Do not look directly at the light from the scanning lamp as it may cause your eyes to feel tired or painful.
Cautions when handling consumables
Caution
Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks may cause burns.
Keep the toner container and the waste toner box out of the reach of children.
If toner happens to spill from the toner container or the waste toner box, avoid inhalation and ingestion, as well as contact with your eyes and skin.
• If you do happen to inhale toner, move to a place with fresh air and gargle thoroughly with a large amount of water. If coughing develops, contact a physician.
• If you do happen to ingest toner, rinse your mouth out with water and drink 1 or 2 cups of water to dilute the contents of your stomach. If necessary, contact a physician.
• If you do happen to get toner in your eyes, flush them thoroughly with water. If there is any remaining tenderness, contact a physician.
• If toner does happen to get on your skin, wash with soap and water.
Do not attempt to force open or destroy the toner container or the waste toner box.
Other precautions
After use, always dispose of the toner container and the waste toner box in accordance with Federal, State and Local rules and regulations.
vii
viii
If the machine will not be used for an extended period of time, remove the paper from the cassette and the MP tray (multi-purpose tray), return it to its original package and reseal it.
Don’t store the unit in a place exposed to:
• Direct sunlight
• High or rapidly variable temperature or humidity (limit: 104 °F or
40 °C)
Legal Information and
Conventions
Please read this information before using your machine. This chapter provides information on the following topics:
Energy Saving Control Function
Automatic 2-Sided Copy Function
Energy Star (ENERGY STAR ® ) Program
xi
ix
x
Legal Information
Notice: The information in this guide is subject to change without notification. Additional pages may be inserted in future editions. The user is asked to excuse any technical inaccuracies or typographical errors in the present edition.
No responsibility is assumed if accidents occur while the user is following the instructions in this guide. No responsibility is assumed for defects in the printer’s firmware (contents of its read-only memory).
This guide, any copyrightable subject matter sold or provided with or in connection with the sale of the machine, are protected by copyright. All rights are reserved. Copying or other reproduction of all or part of this guide, any copyrightable subject matter without the prior written consent of Kyocera Mita Corporation is prohibited. Any copies made of all or part of this guide, any copyrightable subject must contain the same copyright notice as the material from which the copying is done.
Legal Restriction On Copying
• It may be prohibited to copy copyrighted material without permission of the copyright owner.
• It is prohibited under any circumstances to copy domestic or foreign currencies.
• Copying other items may be prohibited.
Regarding Tradenames
• PRESCRIBE and ECOSYS are registered trademarks of Kyocera
Corporation.
• KPDL is trademark of Kyocera Corporation.
• Windows and Windows Server are registered trademarks of
Microsoft Corporation.
• Windows NT is a trademark of Microsoft Corporation.
• PCL and PJL are registered trademarks of Hewlett-Packard
Company.
• Adobe, Adobe Acrobat and Adobe Reader are registered trademarks of Adobe Systems Inc.
• PowerPC is a trademark of International Business Machines
Corporation.
• CompactFlash is a trademark of SanDisk Corporation.
All other brand and product names are registered trademarks or trademarks of their respective companies. The designations ™ and ® will not be used in this Operation Guide.
Energy Saving Control Function
The device comes equipped with a Low Power Mode where energy consumption is reduced after a certain amount of time elapses since the device was last used, as well as an Off Mode where the device automatically turns itself off after there is no activity within a set amount of time. When the copier includes printer and fax functions, the device comes equipped with a Low Power Mode where printer and fax functions remain in a waiting state but energy consumption is still reduced after a certain amount of time elapses since the device was last used, as well as a Sleep Mode where printer and fax functions remain in a waiting state but power consumption is still reduced to a minimum when there is no activity with the device within a set amount of time.
Low Power Mode
The device automatically enters Low Power Mode when 1 minute have passed since the device was last used. The amount of time of no activity that must pass before Low Power Mode is activated may be lengthened.
For more information refer to Low-Power Mode on page 3-17 .
Off Mode
The device automatically enters Off Mode when 9 minutes have passed since the device was last used. The amount of time of no activity that must pass before Off Mode is activated may be lengthened. For more information refer to
.
Sleep Mode (If the copier has printer and/or facsimile function)
The device automatically enters Sleep Mode when 9 minutes have passed since the device was last used. The amount of time of no activity that must pass before Sleep Mode is activated may be lengthened. For
more information refer to Sleep Mode on page 3-17 .
Automatic 2-Sided Copy Function
This device includes 2-sided copying as a standard function. For example, by copying two 1-sided originals onto a single sheet of paper as a 2-sided copy, it is possible to lower the amount of paper used. For
more information refer to Duplex Mode on page 3-10 .
Recycled Paper
This device supports the recycled paper which reduces the load on the environment. Your sales or service representative can provide information about recommended paper types.
Energy Star (E
NERGY
S
TAR
®
) Program
We have determined as a participating company in the International
Energy Star Program that this product is compliant with the standards laid out in the International Energy Star Program.
xi
xii
Laser Safety (Europe)
Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted inside this machine is hermetically sealed within the protective housing and external cover. In the normal operation of the product by user, no radiation can leak from the machine.
This machine is classified as Class 1 laser product under IEC 60825.
Caution: Performance of procedures other than those specified in this manual may result in hazardous radiation exposure.
These labels are attached to the laser scanner unit inside the machine and are not in a user access area.
The Laser classification is indicated on the nameplate.
Safety Instructions Regarding the
Disconnection of Power
Caution: The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source.
VORSICHT: Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen Schalter auf dem Gerät sind nur Funktionsschalter und können nicht verwendet werden, um den Stromfluß im Gerät zu unterbrechen.
DECLARATION OF CONFORMITY TO
2004/108/EC, 2006/95/EEC, 93/68/EEC and 1995/5/EC
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the following specifications.
EN55024
EN55022 Class B
EN61000-3-2
EN61000-3-3
EN60950-1
EN60825-1
EN300 330-1
EN300 330-2
Radio Frequency Transmitter
This machine contains the transmitter module. We, the manufacturer hereby declare that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Radio Tag Technology
In some countries the radio tag technology used in this equipment to identify the toner container may be subject to authorization and the use of this equipment may consequently be restricted.
xiii
xiv
SAFETY OF LASER BEAM (USA)
1. Safety of laser beam
This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the
U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is safe to use during normal operation and maintenance. The laser optical system, enclosed in a protective housing and sealed within the external covers, never permits the laser beam to escape.
2. The CDRH Act
A laser-product-related act was implemented on Aug. 2, 1976, by the
Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits the sale of laser products in the U.S. without certification, and applies to laser products manufactured after Aug. 1, 1976. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States. On this machine, the label is on the right.
3. Optical unit
When checking the optical unit, avoid direct exposure to the laser beam, which is invisible. Shown at below is the label located on the cover of the optical unit.
4. Maintenance
For safety of the service personnel, follow the maintenance instructions in the other section of this manual.
5. Safety switch
The power to the laser unit is cut off when the front cover is opened.
Safety Instructions Regarding the
Disconnection of Power
Caution: The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source.
Attention: Le débranchement de la fiche secteur est le seul moyen de mettre l’appareil hors tension. Les interrupteurs sur l’appareil ne sont que des interrupteurs de fonctionnement: ils ne mettent pas l’appareil hors tension.
WARNING
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The use of a non-shielded interface cable with the referenced device is prohibited.
CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC
Rules.
Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
* The above warning is valid only in the United States of America.
Radio Tag Technology
In some countries the radio tag technology used in this equipment to identify the toner container may be subject to authorization and the use of this equipment may consequently be restricted.
MERCURY WARNING
THE LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY
AND MUST BE RECYCLED OR DISPOSED OF ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS.
xv
xvi
Warranty (USA)
KM-2540 / KM-3040
MULTIFUNCTIONAL PRODUCT LIMITED WARRANTY
Kyocera Mita America, Inc. and Kyocera Mita Canada, Ltd. (both referred to as “Kyocera”) warrant the Customer’s new Multifunctional Product (referred to as “MFP”), and the new accessories installed with the initial installation of the MFP, against any defects in material and workmanship for a period of one (1) year, or 300,000 copies/prints from date of installation, whichever first occurs. In the event the MFP or an accessory is found to be defective within the warranty period, Kyocera’s only obligation and the Customer’s exclusive remedy shall be replacement of any defective parts.
Kyocera shall have no obligation to furnish labor.
This warranty is valid only for the original retail purchaser (referred to as the “Customer”) of a new
Kyocera MFP in the United States of America or Canada, based upon the country of purchase.
In order to obtain performance of this warranty, the Customer must immediately notify the
Authorized Kyocera Dealer from whom the product was purchased. If the Kyocera Dealer is not able to provide service, write to Kyocera at the address below for the name and address of the
Authorized Kyocera Dealer in your area or check Kyocera’s Website at www.kyoceramita.com.
This warranty does not cover MFP’s or accessories which: (a) have become damaged due to operator negligence, misuse, accidents, improper storage or unusual physical or electrical stress,
(b) have used parts or supplies which are not genuine Kyocera brand parts or supplies, (c) have been installed or serviced by a technician not employed by Kyocera or an Authorized Kyocera
Dealer, or (d) have had the serial number modified, altered, or removed.
This warranty does not cover Maintenance Kits or the components of Maintenance Kits, which consist of the drum unit, the fixing unit, and the developing unit which have separate warranties.
This warranty gives the Customer specific legal rights. The Customer may also have other rights, which vary from state to state, or province to province. Neither the seller, nor any other person, is authorized to extend the time period or expand this warranty on behalf of Kyocera.
THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS,
EXPRESS OR IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED
WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY SHALL NOT EXTEND TO, AND KYOCERA SHALL NOT BE
LIABLE FOR, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY ARISE OUT OF
THE USE OF, OR INABILITY TO USE, THE MFP.
About this Operation Guide
This Operation Guide contains the following chapters:
1 Part Names
Identifies machine parts and operation panel keys.
2 Preparation for Usage
Explains adding paper, placing original, connecting the machine, and necessary configurations before first use.
3 Basic Operation
Describes the procedures for basic copying.
4 Optional Equipment
Introduces the convenient optional equipment available for this machine.
5 Maintenance
Describes cleaning and toner replacement.
6 Troubleshooting
Explains how to handle error messages, paper jams, and other problems.
Appendix
Explains how to enter text, describes the media types that can be used with the machine and lists the machine specifications.
Conventions in This Guide
The following conventions are used depending on the nature of the description.
Convention Description
Bold
[Regular]
Indicates operation panel keys.
Indicates touch panel keys.
Italic
Note
Indicates touch panel messages.
Indicates supplemental information or operations for reference.
IMPORTANT Indicates items that are required or prohibited so as to avoid problems.
Example
Press the Start key.
Press [Basic].
Ready to copy displayed.
Note -
is
IMPORTANT xvii
xviii
Originals and Paper Sizes
This section explains the notation used in this guide when referring to sizes of originals or paper sizes.
As in A4 and B5, which may be used either in the horizontal or vertical direction, in order to indicate the orientation of the original/paper, horizontal orientation is indicated by an additional R character.
Set direction
Vertical direction
B B
Indicated size a
A4, B5, A5, B6,
A6, 16K
A A
Original Size
For original/paper, dimension A is longer than B .
Horizontal direction
B B
A4R, B5R, A5R,
B6R, A6R, 16KR
A
A
Original Size
For original/paper, dimension A is shorter than B . a.
The size of original/paper that can be used depends on the function and source tray. For further details, refer to the page detailing that function or source tray.
1 Part Names
This chapter identifies machine parts and operation panel keys.
Part Names 1-1
1-2
Body
1
2
3
4
5
6
1 Original Cover (Option)
2 Platen
3 Original Size Indicator Plates
4 Left Cover 1
5 Left Cover 1 Lever
6 Left Cover 2
7 Clip Holder
8 Operation Panel
9 Cassette 1
10 Cassette 2
7
8
9
10
Part Names
13
14
15
16
11 12
17
11 Toner Container
12 Toner Container Stopper
13 Main Charger
14 Waste Toner Box
15 Cleaning Brush
16 Green Knob (A1)
17 Paper Feed Unit (A2)
18 Paper Feed Unit Cover (A3)
18
Part Names 1-3
1-4
19
20 21 22 23
19 Front Cover
20 Paper Width Guide
21 Paper Width Adjusting Tab
22 Paper Length Guide
23 Carrying Handles
24 Top Tray
25 Output Stopper
26 Paper Width Guide
27 Main Power Switch
28 MP Tray (multi-purpose tray)
24
25
26
27
28
Part Names
2
3
4
1 5 6
Operation Panel
7 8 9 10 11 12 13 14
Ready to copy.
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Auto %
100%
Zoom
Function
Auto
Density
Density
Program
Off
Paper Size
11×8½"
Set
100%
4 in 1
Staple
Left Top
Margin
Left
Bord Erase
Sheet
Staple
15
1 Brightness Adjustment Dial
2 Copy Key (Indicator/Lamp)
3 Print Key (Indicator/Lamp)
4 FAX Key (Indicator/Lamp)
5 System Menu/Counter Key
6 Print Management Key/Indicator
7 Repeat Copy Key/Indicator
8 Job Build Key/Indicator
9 Mixed Sized Originals Key/Indicator
10 Logout Key
11 Interrupt Key/Indicator
12 Energy Saver Key/Indicator
13 Power Key/Indicator
14 Main Power Indicator
15 Touch Panel
16 Numeric Keys
17 Reset Key
18 Stop/Clear Key
19 Start Key/Indicator
16
17
18
19
Part Names 1-5
1-6
Touch Panel
Displayed by pressing the Copy key. Screen changes when 1 , 2 , 3 and 4 are pressed.
1
[Basic] screen
Ready to copy.
Paper Size
11×8½"
Set
100%
4 in 1
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
APS
MP Tray
Plain
Auto %
100%
Zoom
Auto
Density
Density
Off
Staple
Left Top
Staple
Margin
Left
Bord Erase
Sheet
Basic User choice Function Program
1 2
2
[User choice] screen
Ready to copy.
3
Duplex
Original
Image
Collate/
Offset
4
Combine Page #
Basic User choice
3
[Function] screen
Ready to copy.
Paper
Selection
Density
Duplex
Zoom
Original
Image
Collate/
Offset
Margin/
Centering
Border
Erase
Basic User choice
4
[Program] screen
Ready to copy.
Recall abc list a list b list c
Basic
Booklet
Function
Original
Size
Mixed Size
Originals
Page #
Cover
Function list d
User choice file 1 file 2
Function
Combine
Continuous
Scan
Booklet
Program
Program
Margin/
Centering
Cover
Program
Border
Erase
Paper Size Set
11×8½"
100%
4 in 1
Margin
Left
Bord Erase
Sheet
Original
Size
Paper Size Set
11×8½"
100%
4 in 1
Up
Down
Margin
Left
Bord Erase
Sheet
Paper Size Set
11×8½"
100%
Reg./Delete
4 in 1
Register
Delete
Margin
Left
Bord Erase
Sheet
Change
Name
Part Names
2 Preparation for Usage
This chapter explains the preparations required before using the machine.
Before Loading Paper.............................................................. 2-2
Loading Paper into Cassette 1, 2 ............................................ 2-2
Loading Paper in the MP Tray................................................. 2-4
Loading Envelopes .................................................................. 2-6
Setting Media Type and Paper Size for the Cassettes and MP
Specifying Paper Size for the Cassettes ................................. 2-7
Specifying the Media Type for the Cassettes .......................... 2-8
Specifying the Paper Size for the MP Tray.............................. 2-9
Specifying the Media Type for the MP Tray........................... 2-13
Loading Originals on the Platen ............................................ 2-14
Loading Originals in the Document Processor (option) ......... 2-15
Preparation for Usage 2-1
2-2
Loading Paper
Paper can be loaded standardly in the two cassettes and the MP tray. An optional paper feeder is also available. (Refer to
Before Loading Paper
When you open a new package of paper, fan the sheets to separate them slightly prior to loading by the following steps.
1 Bend the stack of sheets and swell in the middle.
2 Hold the stack at both ends and stretch the bottom out flat while keeping the top of the stack swelled.
3 Raise your right and left hands alternately to create a gap and let air between the sheets.
4 Finally, even out the stack on a level, flat table.
If the paper is curled or folded, straighten it before loading. Paper that is curled or folded may cause a jam.
IMPORTANT If you copy with used paper (paper already used for copying), do not use paper that is stapled or clipped together. This may damage the machine or cause poor image quality.
Note If printouts are curled or not neatly stapled, turn the stack in the cassette upside down.
Avoid exposing opened paper to high temperatures and high humidity as dampness can cause problems. Seal any remaining paper after loading in the MP tray or cassettes back in the paper storage bag.
If the machine is not going to be used for a prolonged period, protect paper from humidity by removing it from the cassettes and sealing it in the paper storage bag.
Note If you use special paper such as letterhead, paper with holes or paper with pre-prints such as logos or company name, refer to the Advanced Operation Guide .
Loading Paper into Cassette 1, 2
Up to 500 sheets of plain paper (80 g/m²) or colored paper (80 g/m²) may be loaded in each of the two standard cassettes.
The following paper sizes are supported: 11 × 17", 8 1/2 × 14",
11 × 8 1/2", 8 1/2 × 11", 5 1/2 × 8 1/2", 8 1/2 × 13" (Oficio II),
8 1/2 × 13 1/2", A3, B4, A4, A4R, B5, B5R, A5R, Folio, 8K, 16K and
16KR.
Preparation for Usage
A
B
Preparation for Usage
IMPORTANT When using media types other than plain paper (such as recycled or colored paper), always specify the media type setting.
(Refer to
Specifying the Media Type for the Cassettes on page 2-8
.)
The cassettes can hold 60 to 120 g/m² paper. When using 120 g/m²
paper, specify [Thick paper] for Specifying the Media Type for the
. If the media type setting is wrong, paper jams and deterioration of copy quality may occur.
1
Pull the cassette out toward you until it stops.
Note Do not pull out more than one cassette at a time.
2
Holding the paper width adjusting tab, move the paper width guides to fit the paper.
Note Paper sizes are marked on the cassette.
3
Adjust the paper length guide to the length of the paper.
Note Paper sizes are indicated on the cassettes.
To change between inch size and metric size (A, B sizes), follow the steps below to adjust the size switch.
1 Holding the paper width adjusting tab, move the paper width guide to a position other than that of the paper.
2 Turn the size switch A 90°. >
3 Move the size lever B up (C) or down (I) .
C : metric size (centimeters) (A, B sizes)
I : inch size
4 Turn the size switch 90° to lock it. >
2-3
2-4
4
Align the paper flush against the left side of the cassette.
IMPORTANT Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause paper jams.
Ensure that the loaded paper does not exceed the level indicator
(see the figure).
When loading the paper, keep the side that was closest the package seal facing up.
The paper length and width guides must be adjusted to the paper size. Loading the paper without adjusting these guides may cause skewed feeding and paper jams.
Be sure that the paper length and width guides rest securely against the paper. If there is a gap, readjust the guides to fit the paper.
5
Insert the appropriate paper size card in the slot to indicate the size of the paper inside.
6
Gently push the cassette back in.
Note If the machine is not going to be used for a prolonged period, protect paper from humidity by removing it from the cassettes and sealing it in the original package.
7
Select the media type (plain, recycled, etc.) for the cassette with the
operation panel. (Refer to Specifying the Media Type for the
.)
Loading Paper in the MP Tray
Up to 200 sheets of plain paper (80 g/m²) may be loaded in the MP tray.
The MP tray accepts paper sizes from 11 × 17" to 5 1/2 × 8 1/2", A3 to
A6R, 8K, 16K and 16KR. Be sure to use the MP tray when you print on any special paper.
IMPORTANT When using media types other than plain paper (such as recycled or colored paper), always specify the media type setting.
(Refer to Specifying the Media Type for the MP Tray on page 2-13 .)
The capacity of the MP tray is as follows.
• Thick paper (120 g/m²): 130 sheets
• Thick paper (160 g/m²): 100 sheets
• Thick paper (200 g/m²): 50 sheets
• Hagaki: 80 sheets
• OHP film: 25 sheets
• Envelope DL, Envelope C5, Comm. #10, Monarch, Youkei 4,
Youkei 2: 20 sheets
Preparation for Usage
Preparation for Usage
Note When you load custom size paper, enter the paper size by referring to
Specifying the Paper Size for the MP Tray on page 2-9
.
When you use special paper such as transparencies or thick
paper, select the media type by referring to Specifying the Media
Type for the MP Tray on page 2-13 .
1
Open the MP tray.
2
Adjust the paper width guides to the width of the paper.
3
Insert the paper along the paper width guides into the tray until it stops.
IMPORTANT Keep the side that was closest the package seal facing up.
Curled paper must be uncurled before use.
Straighten the top edge if it is curled.
When loading paper, always adjust the paper width guides to the width of the paper. If you butt the paper up against either side of the MP tray and then use the machine without adjusting the paper width guides to the width of the paper, the machine will malfunction.
2-5
2-6
Loading Envelopes
Up to 20 envelopes may be loaded in the MP tray.
Acceptable envelope sizes are as follows.
Acceptable Envelope
Monarch
Comm. #10
Envelope DL
Envelope C5
Executive
Comm. #9
Comm. #6-3/4
ISO B5
Envelope C4
Oufuku Hagaki
Youkei 2
Youkei 4
1
Open the MP tray.
Size
3 7/8 × 7 1/2"
4 1/8 × 9 1/2"
110 × 220 mm
162 × 229 mm
7 1/4 × 10 1/2"
3 7/8 × 8 7/8"
3 5/8 × 6 1/2"
176 × 250 mm
229 × 324 mm
148 × 200 mm
162 × 114 mm
234 × 105 mm
2
Adjust the paper width guides to the width of the envelope.
3
For landscape form envelopes, close the flap. Insert the envelope all the way along the width guides, keeping the printing side face-up and the flap closed.
For portrait form envelopes, open the flap. Insert the envelope all the way along the width guides, keeping the printing side face-up and the flap positioned opposite to the entrance.
IMPORTANT How envelopes are loaded (orientation and facing) will differ depending on the type of envelope. Be sure to load them correctly, otherwise they may be printed in the wrong direction or on the wrong face.
Note When you load envelopes in the MP tray, select the envelope type by referring to
Specifying the Media Type for the
.
Preparation for Usage
Setting Media Type and Paper Size for the
Cassettes and MP Tray
The default paper size setting for cassettes 1 and 2 and for the optional paper feeder (cassettes 3 and 4) is [Auto Detection] and the default media type setting is [Plain]. To fix the type of paper to be used, specify
the paper size and media type settings. Refer to Specifying Paper Size for the Cassettes below and
Specifying the Media Type for the Cassettes on page 2-8
.
The default paper size setting for the MP tray is [Auto Detection] and the default media type setting is [Plain]. To fix the type of paper to be used, specify the paper size and media type settings. Refer to
Paper Size for the MP Tray on page 2-9 and
Specifying the Media Type for the MP Tray on page 2-13 .
Specifying Paper Size for the Cassettes
To fix the type of paper to be used in cassettes 1 and 2 and in the optional paper feeder (cassettes 3 and 4), specify the paper size setting.
To automatically detect the paper size, set to [Auto Detection] and select either [Centimeter] or [Inch] units.
The following paper sizes are available.
11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11", 5 1/2 × 8 1/2",
8 1/2 × 13 1/2", 8 1/2 × 13" (Oficio II), A3, B4, A4, A4R, B5, B5R, A5R,
Folio, 8K, 16K, 16KR
1
Press the System Menu/Counter key.
System Menu / Counter
System Menu
Copy
Default
Machine
Default
Language
MP Tray
Setting
Register
Orig. Size
System Menu / Counter
Machine Default
Default menu
Auto cassette switching
Paper size (Cassette 1)
Paper size (Cassette 2)
Paper size (Cassette 3)
Paper size (Cassette 4)
System Menu
Setting mode
On / All types of paper
Auto/Inch
Auto/Inch
Auto/Inch
Auto/Inch
Job
Accoun
Report
2
Press [Machine Default].
3
Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the 25 cpm model and 3000 for the 30 cpm model.
If the correct management code has been entered, the Machine
Default screen will be displayed.
4
Press [ S ] or [ T ], select the cassette you wish to set the paper size from Paper size (Cassette 1) - Paper size (Cassette 4) and press
[Change #].
Note Cassette 3 and Cassette 4 are shown when the optional paper feeder have been installed.
Change
Preparation for Usage 2-7
Paper size (Cassette 1)
Select paper size.
Auto
Detection
Standard sizes
System Menu
Back
A3
A4
A4
A5
Machine Default
5½×8½"
8½×13½"
8½×13"
8K
16K
16K
Close
5
If [Auto Detection] is selected, choose the unit type. If [Standard sizes] is selected, choose the paper size.
Press [Close].
Key
[Close]
[Back]
Description
Keeps the settings and returns to the previous page.
Cancels settings and returns to the previous page.
6
Press [Close].
7
Press [End]. The display returns to the [Basic] screen.
Specifying the Media Type for the Cassettes
To use a media type other than plain paper in cassettes 1 and 2 or in the optional paper feeder (cassettes 3 and 4), specify the media type setting.
The following media types are available.
Plain , Rough , Vellum , Recycled , Preprinted , Bond , Color ( Colour) ,
Prepunched , Letterhead , Thick paper , High Quality , Custom 1 - 8
IMPORTANT If the optional fax kit is installed, the available media types for printing received faxes are as shown below.
Plain , Rough , Recycled , Bond , Color ( Colour ), High Quality , Custom
1 - 8
1
Press the System Menu/Counter key.
System Menu / Counter
System Menu
Copy
Default
Machine
Default
Language
MP Tray
Setting
Register
Orig. Size
System Menu / Counter
Machine Default
Default menu
Media Type (Cassette 1)
Media Type (Cassette 2)
Media Type (Cassette 3)
Media Type (Cassette 4)
Store Paper Size for MPT
System Menu
Plain
Color
Plain
Plain
Setting mode
Job
Accoun
Report
2
Press [Machine Default].
3
Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the 25 cpm model and 3000 for the 30 cpm model.
If the correct management code has been entered, the Machine
Default screen will be displayed.
4
Press [ S ] or [ T ], select the cassette you wish to set the media type from Media Type (Cassette 1) - Media Type (Cassette 4) and press
[Change #].
Note Cassette 3 and Cassette 4 are shown when the optional paper feeder have been installed.
Change
2-8 Preparation for Usage
Media Type (Cassette 1)
Select and display paper type.
Plain
Rough
Vellum
System Menu
Recycled
Preprinted
Bond
Machine Default
Thick paper
Color
Prepunched
Letterhead
High
Quality
Custom 1
Bac
5
Select the media type and press [Close].
6
Press [Close].
7
Press [End]. The display returns to the [Basic] screen.
Custom 2
Custom 3
Custom 4
Specifying the Paper Size for the MP Tray
To fix the type of paper to be used in the MP tray, specify the paper size setting.
The following paper sizes are available.
Setting method
Unit Paper size
Auto Detect Inch 11 × 17", 8 1/2 × 14", 11 × 8 1/2",
8 1/2 × 11", 5 1/2 × 8 1/2"
Centimeter A3, B4, A4, A4R, B5, B5R, A5R, B6R, A6R
Other Standard Sizes ISO B5, Envelope DL, Envelope C5,
Envelope C4, Comm. #10, Comm. #9,
Comm. #6-3/4, Monarch, Executive,
OUFUKU HAGAKI (return postcard),
YOUKEI 2, YOUKEI 4, 8 1/2 × 13 1/2",
8 1/2 × 13" (Oficio II), 8K, 16K, 16KR
Size Entry Inch models
Custom Size
Height: 3 7/8 - 11 5/8" (1/8" increments)
Width: 5 7/8 - 17" (1/8" increments)
Metric models
Height: 98 - 297 mm (1 mm increments)
Width: 148 - 432 mm (1 mm increments)
Pre-assigned paper size 1-4
Assignable paper sizes
Inch models
Height: 3 7/8 - 11 5/8" (1/8" increments)
Width: 5 7/8 - 17" (1/8" increments)
Metric models
Height: 98 - 297 mm (1 mm increments)
Width: 148 - 432 mm (1 mm increments)
Auto Detect
The paper size is automatically detected. Select between [Centimeter]
([Centimetre]) and [Inch] measurement units.
1
Press the System Menu/Counter key.
Preparation for Usage 2-9
System Menu / Counter
System Menu
Copy
Default
Machine
Default
Language
MP Tray
Setting
Register
Orig. Size
System Menu / Counter
MP Tray Setting
Paper Size Unit
Auto
Detection
Size Entry
Others
Standard
Centimeter
Inch
Job
Accoun
2
Press [MP Tray Setting].
Report
Bac
Media
3
Press [Auto Detection].
4
Select [Centimeter] ([Centimetre]) or [Inch].
5
Press [Close]. The display returns to the [Basic] screen.
Pla
Other Standard Sizes
Specify special standard sizes.
1
Press the System Menu/Counter key.
System Menu / Counter
System Menu
Copy
Default
Machine
Default
Language
MP Tray
Setting
Register
Orig. Size
Job
Accoun
Report
2
Press [MP Tray Setting].
System Menu / Counter
MP Tray Setting
Paper Size
Auto size
Size Entry
Others
Standard
Envelope
C4
Select size
System Menu / Counter
Select size
ISO B5
Envelope
DL
Envelope
C5
Envelope
C4
Comm.#10
Comm.#9
Comm.
#6-3/4
MO
EX
OUFUKU
HAGAKI
YOUKEI 2
YOUKEI 4
Bac
Media
En
3
Press [Others Standard] and press [Select size].
8½×13½"
8½×13"
8K
16K
16K
Bac
4
Select the paper size.
5
Press [Close].
6
Press [Close]. The display returns to the [Basic] screen.
2-10 Preparation for Usage
Size Entry
Specify the required paper size.
1
Press the System Menu/Counter key.
System Menu / Counter
System Menu
Copy
Default
Machine
Default
Language
MP Tray
Setting
Register
Orig. Size
Job
Accoun
2
Press [MP Tray Setting].
System Menu / Counter
MP Tray Setting
Paper Size
Y
(3 7/8 ~11 5/8 )
11 11 /
16 "
Auto
Detection
Size Entry
Others
Standard
X
(5 7/8 ~17)
16 9 /
16 "
Report
Bac
Media
En
3
Press [Size Entry].
4
Press [+] and [–] to set the Y (height) and X (width) sizes.
With the metric models, you may enter the size directly using the numeric keys by pressing [#-Keys].
5
Press [Close]. The display returns to the [Basic] screen.
Custom Size
Store frequently used paper sizes as custom sizes. Also, the media type can be set for each custom size.
Assignment Method
1
Press the System Menu/Counter key.
System Menu / Counter
System Menu
Copy
Default
Machine
Default
Language
MP Tray
Setting
Register
Orig. Size
System Menu / Counter
Machine Default
Default menu
Media Type (Cassette 1)
Media Type (Cassette 2)
Media Type (Cassette 3)
Media Type (Cassette 4)
Store Paper Size for MPT
System Menu
Plain
Color
Plain
Plain
Setting mode
Job
Accoun
Report
2
Press [Machine Default].
3
Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the 25 cpm model and 3000 for the 30 cpm model.
If the correct management code has been entered, the Machine
Default screen will be displayed.
4
Press [ S ] or [ T ] to select Store Paper Size for MPT , and press
[Change #].
Change
Preparation for Usage 2-11
Store Paper Size for MPT
Stores Paper Size for Multi Purpose Tray.
Default menu
Paper size (User reg. 1)
Paper size (User reg. 2)
Paper size (User reg. 3)
Paper size (User reg. 4)
Setting mode
11 11/16 ×16 9/16 "
11 11/16 ×16 9/16 "
11 11/16 ×16 9/16 "
11 11/16 ×16 9/16 "
5
Press [ S ] or [ T ], select the number to register from Paper size
(User reg. 1 4) and press [Change #].
System Menu Machine Default
Paper size (User reg. 1)
Stores Paper Size for Multi Purpose Tray.
Color/B&W selection
Y
(3 7/8 ~11 5/8 )
11 11 /
16 "
Off
On
X
(5 7/8 ~17)
16 9 /
16 "
System Menu Machine Default Store Paper Size for MPT
Change
Ba
Medi
Pla
6
Press [On] and press [+] or [–] to set the Y (Length) and X (Width) sizes.
With the metric models, you may enter the size directly using the numeric keys by pressing [#-Keys].
To specify a media type, press [Select Media Type]. Select the media type and press [Close].
7
Press [Close].
8
Press [Close].
9
Press [End]. The display returns to the [Basic] screen.
Setting Method
1
Press the System Menu/Counter key.
System Menu / Counter
System Menu
Copy
Default
Machine
Default
Language
MP Tray
Setting
Register
Orig. Size
Job
Accoun
Report
2
Press [MP Tray Setting].
System Menu / Counter
MP Tray Setting
Paper Size
Envelope
C4
Select size
Auto size
Size Entry
Others
Standard
/ Counter m.#10 m.#9 m.
/4
EX
OUFUKU
HAGAKI
YOUKEI 2
YOUKEI 4
8½×13½"
8½×13"
8K
16K
16K
Back Close
Custom Size
11 11 /
16
×16 9 /
16
"
11 11 /
16
×16 9 /
16
"
11 11 /
16
×16 9 /
16
"
11 11 /
16
×16 9 /
16
"
Bac
Media
En
3
Press [Others Standard] and press [Select size].
4
Select the paper size from Custom Size ( Use regist ).
5
Press [Close].
6
Press [Close]. The display returns to the [Basic] screen.
2-12 Preparation for Usage
Specifying the Media Type for the MP Tray
To use a media type other than plain paper in the MP tray, specify the media type setting.
The following media types are available.
Plain , Transparency , Rough , Vellum , Labels , Recycled , Preprinted ,
Bond , Cardstock , Color ( Colour ), Prepunched , Letterhead , Thick paper ,
Envelope , High Quality , Custom 1 - 8
IMPORTANT If the optional fax kit is installed and you are using the
MP tray to print received faxes (refer to Turning Manual Paper Feed
ON/OFF (MP Tray setting) in Chapter 6 of the fax kit Operation
Guide ), the available media types are as shown below.
Plain , Rough , Recycled , Bond , Color ( Colour ), High Quality , Custom
1 - 8
Note Media type cannot be changed for MP tray paper size when a Custom size has been selected that has already set the media type.
1
Press the System Menu/Counter key.
System Menu / Counter
System Menu
Copy
Default
Machine
Default
Language
MP Tray
Setting
Register
Orig. Size
Job
Accoun
Report
2
Press [MP Tray Setting].
/ Counter
Unit
Centimeter
Inch
Back
Media Type
Plain
Close
Select
Media Type
3
Press [Select Media Type].
System Menu / Counter
Select Media Type
Plain
Transparency
Rough
Vellum
Labels
Recycled
Preprinted
Bond
Cardstock
Color
Prepunched
Letterhead
Thick paper
Envelope
High
Quality
Custom 1
Bac
4
Select the media type.
5
Press [Close].
6
Press [Close]. The display returns to the [Basic] screen.
Custom 2
Custom 3
Custom 4
Preparation for Usage 2-13
Loading Originals
Follow the steps below to load originals for copying.
Loading Originals on the Platen
You may place books or magazines on the platen in addition to ordinary sheet originals.
1
Open the original cover.
Note Open the optional document processor instead if installed. Before opening the document processor, be sure that there are no originals left on the original table or on the original eject table. Left originals may fall off when the document processor is opened.
Keep the document processor open if the original is 40 mm or thicker.
2
Place the original. Put the scanning side facedown and align it flush against the original size indicator plates with the back left corner as the reference point.
Original size indicator plates (Inch models)
2-14 Preparation for Usage
(Metric models)
Preparation for Usage
3
Close the original cover.
IMPORTANT Do not push the original cover forcefully when you close it. Excessive pressure may crack the platen glass.
Note Shadows may be produced around the edges and in the middle of open-faced originals.
CAUTION Do not leave the document processor open as there is a danger of personal injury.
Loading Originals in the Document Processor
(option)
The optional document processor automatically scans each sheet of multiple originals. Both sides of two-sided originals are scanned.
Part Names of the Document Processor
1 2 3 4 5 6
7
1 Original placement indicator
2 Top cover
3 Original width guides
4 Original table
2-15
2-16
5 Original eject table
6 Original stopper
7 Opening handle
Originals Supported by the Document Processor
The document processor supports the following types of originals.
Item
Weight
Size
Capacity
Specifications
45 g/m² to 160 g/m²
Maximum 11 × 17" to Minimum 5 1/2 × 8 1/2"
Maximum A3 to Minimum A5R
Plain paper (80 g/m²), Colored paper, Recycled paper: 75 sheets (Mixed sized originals: 30 sheets)
Thick paper (120 g/m²): 49 sheets
Thick paper (160 g/m²): 37 sheets
Art paper: 1 sheet
High quality paper (110 g/m²): 54 sheets
Originals Not Supported by the Document Processor
Do not use the document processor for the following types of originals.
• Soft originals such as vinyl sheets
• Transparencies such as OHP film
• Carbon paper
• Originals with very slippery surfaces
• Originals with adhesive tape or glue
• Wet originals
• Originals with correction fluid which is not dried
• Irregularly shaped (non-rectangular) originals
• Originals with cut-out sections
• Crumpled paper
• Originals with folds (Straighten the folds before loading. Failure to do so may cause the originals to jam).
• Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases before loading. Failure to do so may cause the originals to jam).
How to Load Originals
IMPORTANT Before loading originals, be sure there are no originals left on the original eject table. Left originals may cause the new originals to jam.
1
Adjust the original width guides to the width of the originals.
Preparation for Usage
Preparation for Usage
2
Place the originals. Put the side to be scanned (or the first side of two-sided originals) face-up. Slide the leading edge into the document processor as far as it will go. The original placement indicator will be lit.
IMPORTANT Confirm that the original width guides exactly fit the originals. If there is a gap, readjust the guides. The gap may cause the originals to jam.
Ensure that loaded originals do not exceed the level indicator. If exceeded, originals may jam (see the figure).
Originals with punched holes or perforated lines should be placed such that the holes or perforations will be scanned last (not first).
Original placement indicator
The original placement indicator is lit depending on how originals are placed.
Indications and their status are as follows.
• Green (upper indicator) lit: Original is placed properly.
• Green (upper indicator) blinking: Original is not placed properly.
Remove and place again.
• Red (lower indicator) blinking: Original is jammed. Remove the jammed original and place it properly.
2-17
Language
Select the language displayed on the touch panel.
The following languages are available.
Model Type
Inch models
Metric models
Language
English, French ( Français ), Spanish ( Español ),
Japanese ( ), Portuguese ( Português )
English, German ( Deutsch ), French ( Français ),
Spanish ( Español ), Italian ( Italiano ), Russian
( )
1
Press the System Menu/Counter key.
System Menu / Counter
System Menu
Copy
Default
Machine
Default
Language
MP Tray
Setting
Register
Orig. Size
Language
English Français
Português
Español
System Menu
2
Press [Language].
Job
Accoun
Report
3
Select the key for the language you would like to set. The touch panel display will change to that language.
2-18 Preparation for Usage
Basic Operation
3 Basic Operation
This chapter explains the following operations.
Turning off the main power switch ........................................... 3-3
Auto Zoom ............................................................................... 3-6
Manual Zoom........................................................................... 3-7
Preset Zoom ............................................................................ 3-7
XY Zoom.................................................................................. 3-8
One-sided to Two-sided......................................................... 3-10
Two-sided to Two-sided......................................................... 3-10
Book to Two-sided ................................................................. 3-10
Two-sided to One-sided......................................................... 3-13
Book to One-sided................................................................. 3-13
Auto Low-Power Mode .......................................................... 3-17
Auto Sleep Mode ................................................................... 3-17
3-1
3-2
Basic Copying Procedures
Follow the steps as below for basic copying.
1
Open the main power switch cover and move the main power switch to on ( | position).
After warm-up is complete, the Start key’s Start indicator will glow green.
2
Place the original.
Note
Refer to Loading Originals on page 2-14 for original
placement instructions.
Ready to copy.
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Auto %
100%
Zoom
Function
Auto
Density
Density
Program
Off
Stap
Left
Stap
P
3
Confirm that [APS] is selected. In this mode, paper that matches the size of the originals will be selected automatically. To change the paper size, press the desired paper size to select the paper source.
4
Use the numeric keys to enter the copy quantity. You can specify up to 999 copies.
Note When copying onto 11 × 17" or A3 paper, open the output stopper.
5
Press the Start key.
Basic Operation
Basic Operation
Note Adjust the angle of the operation panel by pulling the operation panel lower lever.
6
Remove the finished copies from the top tray.
The top tray can hold up to 250 sheets of standard paper (80 g/m²).
However, the actual capacity varies depending on the type and condition of the paper.
Turning off the main power switch
Press the Power key on the operation panel, and after verifying the
Power indicator has gone off, switch off the main power switch.
If the optional fax kit is installed, when the main power switch is off ( position), fax send/receive is disabled. To turn the power off, press the
Power key on the operation panel.
3-3
3-4
Ready to copy.
Paper
Selection
Density
Original
Image
Collate/
Offset
Basic
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Ready to copy.
Duplex
Zoom
Margin/
Centering
Border
Erase
User choice
Ready to copy.
Original Image
Auto %
100%
Zoom
Function
Original
Size
Mixed Size
Originals
Page #
Cover
Function
Auto
Density
Density
Program
Combine
Continuous
Scan
Booklet
Program
Shortcut
Off
Stap
Left
Stap
Bac
Selecting Image Quality
Choose the image quality suited to the type of original.
Image Quality
Text+Photo
Photo
Text
P
1
Place the original.
2
Press [Function].
Description
Appropriate for mixed text and photo originals.
Appropriate for photo originals.
Appropriate for document originals with large amounts of text.
3
Press [Original Image].
4
Select the image quality.
Text+Photo
Photo
Text
Text+Photo:Set this m with mixed text and ph
Photo: For copying ph
Text: For copying text
5
Press the Start key. Copying begins.
Basic Operation
Ready to copy.
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Auto %
100%
Zoom
Function
Auto
Density
Density
Program
Adjusting Density
Off
Stap
Left
Adjust the density automatically or manually. The default setting is
[Manual]. Follow the steps as below for Manual mode.
1
Place the original.
2
Press the density adjustment key ( / ) to adjust the density.
Press [Auto Density] to use Auto Density. The machine determines a suitable density for copying. To change the density from [Auto] to
[Manual], press the density adjustment key ( / ).
Stap
3
Press the Start key. Copying begins.
Note Press [Density] to display the Density screen. You can also adjust the density from this screen.
Basic Operation 3-5
3-6
11 × 17": 129 %
Zoom
Adjust the magnification to reduce or enlarge the original image.
The following zoom modes are available.
• Auto Zoom – Automatically reduces or enlarges the original image suited to the selected paper size.
• Manual Zoom – Reduces or enlarges the original image in 1 % increments between 25 - 400 %.
• Preset Zoom – Reduces or enlarges at preset magnifications.
• XY Zoom – Independently adjust vertical and horizontal magnifications. Set zoom size in 1 % increments between 25 -
400 %.
Auto Zoom
Automatically reduces or enlarges the original image suited to the selected paper size.
Follow the steps below to use auto zoom.
8 1/2 × 11"
A3: 141 %
5 1/2 × 8 1/2": 64 %
A4
A5: 70 %
Ready to copy.
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Ready to copy.
Auto %
100%
Zoom
Function
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Auto %
100%
Zoom
Function
Auto
Density
Density
Program
Auto
Density
Density
Program
Off
Stap
Left
Stap
Off
Stap
Left
Stap
1
Place the original and select paper size.
2
Press [Auto %].
The magnification will be displayed.
3
Press the Start key. The image will be automatically reduced or enlarged for copying onto the selected paper.
Basic Operation
25 %
Manual Zoom
Reduces or enlarges the original image in 1 % increments between 25 -
400 %.
Follow the steps as below to use manual zoom.
400 %
Ready to copy.
1
Place the original and press [Zoom].
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Ready to copy.
Zoom
Auto %
100%
Zoom
Function
Standard
Zoom
XY Zoom
# keys
Auto
Density
Density
Program
Off
Stap
Left
Stap
Shortcut Ba
2
Press [+] and [–] to set the displayed magnification.
Press [# keys] ([#-Keys]) to enter with numeric keys.
Auto %
100%
400%
200%
5½×8½" J 11×17"
154%
5½×8½" J 8½
129%
8½×11" J 11
121%
8½×14" J 11
78%
8½×14" J 8½
3
Press the Start key. Copying begins.
Preset Zoom
Reduces or enlarges at preset zoom levels.
Model Type
Inch models
Metric models
Zoom Level
200 % (5 1/2 × 8 1/2" J 11 × 17")
154 % (5 1/2 × 8 1/2" J 8 1/2 × 14")
129 % (8 1/2 × 11" J 11 × 17")
121 % (8 1/2 × 14" J 11 × 17")
78 % (8 1/2 × 14" J 8 1/2 × 11")
77 % (11 × 17" J 8 1/2 × 14")
64 % (11 × 17" J 8 1/2 × 11")
50 % (11 × 17" J 5 1/2 × 8 1/2")
200 % (A5 J A3)
141 % (A4 J A3, A5 J A4)
127 % (Folio J A3)
106 % (11 × 15" J A3)
90 % (Folio J A4)
75 % (11 × 15" J A4)
70 % (A3 J A4, A4 J A5)
Basic Operation 3-7
Model Type
Metric models (Asia
Pacific)
Zoom Level
200 % (A5 J A3)
141 % (A4 J A3, B5 J B4)
122 % (A4 J B4, A5 J B5)
115 % (B4 J A3, B5 J A4)
86 % (A3 J B4, A4 J B5)
81 % (B4 J A4, B5 J A5)
70 % (A3 J A4, B4 J B5)
Follow the steps as below to use preset zoom.
1
Place the original and press [Zoom].
Ready to copy.
y.
keys
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Shortcut
Auto %
100%
Zoom
Function
Auto
Density
Density
Program
Back
Paper Size Set
11×8½"
100%
Close
Off
Stap
Left
Stap
2
Select the zoom level.
Note You can also adjust the magnification in 1 % increments as desired by pressing [+] and [–].
Auto %
100%
400%
200%
5½×8½" J 11×17"
154%
5½×8½" J 8½×14"
129%
8½×11" J 11×17"
121%
8½×14" J 11×17"
78%
8½×14" J 8½×11"
77%
11×17" J 8½×14"
64%
11×17" J 8½×11"
50%
11×17" J 5½×8½"
25%
3
Press the Start key. Copying begins.
Y
XY Zoom
Select vertical and horizontal magnifications individually. Set zoom level in 1 % increments between 25 - 400 %.
Follow the steps as below to use XY zoom.
Ready to copy.
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Auto %
100%
Zoom
Function
X
Auto
Density
Density
Program
Off
Stap
Left
Stap
1
Place the original and press [Zoom].
2
Press [XY Zoom].
3-8 Basic Operation
y.
Ready to copy.
Zoom
Y
Standard
Zoom
XY Zoom
# keys
Shortcut
X
X
Shortcut Ba
Sele
Orie
3
Press [+] and [–] to set the X and Y zoom ratios.
Press [# keys] ([#-Keys]) to enter with numeric keys.
# keys
Paper Size
11×8½"
100%
Set
Back Close
Select Original
Orientation.
To
To
4
Under Select Original Orientation , select [Top Edge Top] or [Top
Edge Left].
# keys # keys
Top Edge
Top
Top Edge
Left
5
Press the Start key. Copying begins.
Basic Operation 3-9
3-10
1
2
3
4
5
Original
2
1
4
3
5
Original
2
4
1
3
5
Copy
Duplex Mode
Use Duplex mode to create two-sided copies from a variety of originals, including facing pages (such as books or magazines) and two-sided originals.
One-sided to Two-sided
Produces two-sided copies from one-sided originals. The back side of the last copied page will be blank for originals with an odd number of pages.
The following binding options are available.
• Original Left/Right Bind to Finish Left/Right Bind: Back side is copied with same orientation as front side. ...
A
• Original Left/Right Bind to Finish Top Bind: Images are copied onto the back side rotated 180°. Pages of the copied document are in the same orientation if pages are flipped upward. ...
B abc def ghi
A abc ghi def
B abc ghi def
Original Copy
2
1
4
3
Copy
5
Two-sided to Two-sided
Produces two-sided copies from two-sided originals.
Note This operation requires the optional document processor.
Supported paper sizes for Two-sided to Two-sided operation are:
11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11", 5 1/2 × 8 1/2",
8 1/2 × 13" (Oficio II), 8 1/2 × 13 1/2", A3, B4, A4, A4R, B5, B5R,
A5R and Folio.
Book to Two-sided
Produces two-sided copies from originals such as books and magazines with facing pages.
1 2 3 4
2
1
4
3
0
1 2
3
2 1 4 3
2
1
4
3
3
2 1
0
Original Copy
Note Supported paper sizes for Book to Two-Sided operation are limited to: 11 × 17", 8 1/2 × 11", A3, B4, A4R, B5R, A5R, and 8K.
Basic Operation
Ready to copy.
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Ready to copy.
Paper
Selection
Density
Original
Image
Collate/
Offset
Basic
Duplex
Zoom
Margin/
Centering
Border
Erase
User choice
2 sided mode.
Duplex
Auto %
100%
Zoom
Function
Original
Size
Mixed Size
Originals
Page #
Cover
Function
1 sided
J 1 sided
2 sided
J 1 sided
Book
J 1 sided
1 sided
J 2 sided
2 sided
J 2 sided
Book
J 2 sided
2 sided mode.
Duplex
Auto
Density
Density
Program
Combine
Continuous
Scan
Booklet
Program
Shortcut
Finishing
Binding
Left/Right
Binding
Top
Original
Shortcut
Finishing
1 sided
J 1 sided
2 sided
J 1 sided
Book
J 1 sided
1 sided
J 2 sided
2 sided
J 2 sided
Book
J 2 sided
2 sided mode.
Duplex
Binding
Left/Right
Binding
Top
Binding
Left/Right
Binding
Top
Shortcut
Finishing
Binding
Left/Right
Binding
Top
1 sided
J 1 sided
2 sided
J 1 sided
Book
J 1 sided
1 sided
J 2 sided
2 sided
J 2 sided
Book
J 2 sided
2 sided mode.
Duplex
1 sided
J 1 sided
2 sided
J 1 sided
Book
J 1 sided
1 sided
J 2 sided
2 sided
J 2 sided
Book
J 2 sided
Original
Shortcut
Finishing
Binding
Left
Binding
Right
Book J
2 sided
Book J
Book
Off
Stap
Left
Stap
Ba
Sele
Orie
To
To
Ba
Sele
Orie
To
To
Ba
Set top
P
Follow the steps as below to use duplex copying.
1
Press [Function].
2
3
Press [Duplex].
Select the desired Duplex mode.
To
To
Ba
Sele
Orie
4
For [2 sided J 2 sided] ([2-sided J 2-sided]) or [Book J 2 sided]
([Book J 2-sided]), select the bind direction for Original .
For [1 sided J 2 sided] ([1-sided J 2-sided]) or [2 sided J 2 sided]
([2-sided J 2-sided]), select the bind direction for Finishing .
For [Book J 2 sided] ([Book J 2-sided]), set the copy page order for
Finishing .
Basic Operation 3-11
e.
Original
Shortcut
Finishing
Binding
Left/Right
Binding
Top
Binding
Left/Right
Binding
Top
Back
Paper Size Set
11×8½"
100%
Close
Select Original
Orientation.
Top Edge
Top
Top Edge
Left
For [1 sided J 2 sided] ([1-sided J 2-sided]) or [2 sided J 2 sided]
([2-sided J 2-sided]), set [Top Edge Top] or [Top Edge Left] from
Select Original Orientation .
5
Place the original and press the Start key.
If the original has been placed on the optional document processor, copying begins automatically.
If the original is placed on the platen, Scan next original(s) is displayed. Place the next original page and press the Start key.
If all original pages have been scanned, press [Scanning finished].
Copying begins.
3-12 Basic Operation
1
2
1
Original
Original
2
Ready to copy.
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Ready to copy.
Paper
Selection
Density
Original
Image
Collate/
Offset
Basic
Duplex
Zoom
Margin/
Centering
Border
Erase
User choice
Auto %
100%
Zoom
Function
Original
Size
Mixed Size
Originals
Page #
Cover
Function
Auto
Density
Density
Program
Combine
Continuous
Scan
Booklet
Program
1 2
Split Mode
Use Split mode to create single-sided copies from two-sided originals or originals with facing pages (such as books or magazines) as follows.
Two-sided to One-sided
Copies each side of a two-sided original onto two individual sheets.
Note This operation requires the optional document processor.
1
Copy
Copy
2
The following binding options are available.
• Binding Left/Right: The back side and front side of the original are copied with the same orientation.
• Binding Top: The back side is copied rotated 180 ° from the orientation of the front side.
Book to One-sided
Copies each page of originals with facing pages (such as books or magazines) onto two individual sheets.
The following binding options are available.
• Binding Left: Originals with facing pages are copied from left to right.
• Binding Right: Originals with facing pages are copied from right to left.
Note Original sizes for split mode copy mode are limited to
11 × 17", 8 1/2 × 11", A3, B4, A4R, B5R and 8K. Paper sizes are limited to 11 × 8 1/2", A4, B5 and 16K. Change the paper size to fit the original to that size.
P
Follow the steps as below to use Split mode.
1
Press [Function].
Off
Stap
Left
Stap
2
Press [Duplex].
Basic Operation 3-13
y.
Ready to copy.
Duplex
1 sided
J 1 sided
2 sided
J 1 sided
Book
J 1 sided
1 sided
J 2 sided
2 sided
J 2 sided
Book
J 2 sided
Ready to copy.
Duplex
1 sided
J 1 sided
2 sided
J 1 sided
Book
J 1 sided
1 sided
J 2 sided
2 sided
J 2 sided
Book
J 2 sided
Original
3
Select the desired Split mode.
Shortcut
Original
Shortcut Ba
Sele
Orie
Binding
Left/Right
Binding
Top
Original
Shortcut Ba
Sele
Orie
To
To
4
Specify the binding in the Original section.
Binding
Left/Right
Binding
Top
Back
Paper Size Set
11×8½"
100%
Close
Select Original
Orientation.
To
To
5
When [2 sided J 1 sided] ([2-sided J 1-sided]) is selected, select
[Top Edge Top] or [Top Edge Left] for Select Original Orientation .
Binding
Left/Right
Binding
Top
Top Edge
Top
Top Edge
Left
6
Place the original and press the Start key.
If the original has been placed on the optional document processor, copying begins automatically.
If the original is placed on the platen, Scan next original(s) is displayed. Place the next original page and press the Start key.
If all original pages have been scanned, press [Scanning finished].
Copying begins.
3-14 Basic Operation
1
2
3
1
2
3
1
2
3
1
2
3
Collate Mode
Scans multiple originals to deliver complete sets of copies as required according to page number.
Follow the steps as below to use Collate mode.
Original
Ready to copy.
Copy
11×8½"
Plain
11×17"
Color
11×8½"
Plain
8½×11"
Plain
Basic
APS
MP Tray
Plain
User choice
Ready to copy.
Paper
Selection
Density
Original
Image
Collate/
Offset
Basic
Duplex
Zoom
Margin/
Centering
Border
Erase
User choice
Ready to copy.
Collate/Offset
Collate Offset
Auto %
100%
Zoom
Function
Original
Size
Mixed Size
Originals
Page #
Cover
Function
Auto
Density
Density
Program
Combine
Continuous
Scan
Booklet
Program
Shortcut
Collate
Off
Collate:On
Off
On
Off
Stap
Left
Stap
P
1
Press [Function].
2
Press [Collate/Offset].
Ba
3
Press [Collate: On].
4
Use the numeric keys to enter the copy quantity.
5
Place the original and press the Start key.
If the original has been placed on the optional document processor, copying begins automatically.
If the original is placed on the platen, Scan next original(s) is displayed. Place the next original page and press the Start key.
If all original pages have been scanned, press [Scanning finished].
Copying begins.
Complete sets of copies will be delivered on the top tray.
Basic Operation 3-15
3-16
Interrupt Copy
Interrupt copying is useful to pause one copy job and copy other originals with different copy settings. After completing the urgent job, you can resume the interrupted jobs according to their original settings. You can also pause copy jobs that are being printed when you need to make urgent copies.
Follow the steps as below to use interrupt copying.
1
Press the Interrupt key.
Interrupt Mode OK will be displayed.
2
Temporarily remove and set aside the original pages of the current job.
3
Place the original for the interrupt job.
4
Specify the copy settings for the interrupt job and press the Start key.
5
After the interrupt job is completed, remove the originals and press the Interrupt key.
The previous settings will be restored. If there was a job being printed, it will be resumed.
6
Replace the interrupted original and press the Start key to restart the job.
Basic Operation
Basic Operation
Low-Power Mode
To activate Low-Power mode, press the Energy Saver key.
On the operation panel, only the Energy Saver , Power , and main power indicators will remain lit.
To resume copying, perform one of the following actions. The machine returns to a copy-ready condition.
• Press any key on the operation panel.
• Open the original cover or the optional document processor.
• Place originals in the optional document processor.
The machine will resume copy functionality in 10 seconds.
If you are using the optional printer function or fax function and print data or a fax arrives while the machine is in Low-Power mode, the machine automatically wakes up and starts printing.
Auto Low-Power Mode
In Auto Low-Power mode, the machine automatically switches to Low-
Power mode if left idle for a preset period. The default period for Auto
Low-Power mode is 1 minute.
Sleep Mode
To activate Sleep mode, press the Power key.
On the operation panel, only the Main Power indicator will remain lit. The machine will use much less power than Low-Power mode.
To resume copying, press the Power key again. The machine will resume copy functionality in 15 seconds.
If you are using the optional printer function or fax function and print data or a fax arrives while the machine is in Sleep mode, the machine automatically starts printing without illuminating the operation panel.
Auto Sleep Mode
In Auto Sleep mode, the machine automatically switches to Sleep mode if left idle for a preset period. The default period for Auto Sleep mode is
9 minutes.
3-17
3-18 Basic Operation
4 Optional Equipment
This chapter introduces the optional equipment available for the machine.
Overview of Optional Equipment
Adding Staples......................................................................... 4-4
Clearing Staple Jams............................................................... 4-5
Inserting the Key Counter........................................................ 4-7
Optional Equipment 4-1
Overview of Optional Equipment
The following optional equipment is available for the machine.
Document Processor Key Counter
4-2
Document Finisher
Built-in Finisher Paper Feeder
Job Separator
Printer Kit
Fax Kit
Optional Equipment
Optional Equipment
Document Processor
Automatically scans originals. Also you can perform duplex copying and split copying. For document processor operation, refer to
Originals in the Document Processor (option) on page 2-15 .
Paper Feeder
Two additional cassettes identical to the machine’s double cassettes can be installed in the machine. Paper capacity and loading method are the
same as Cassettes 1 and 2. Refer to Loading Paper into Cassette 1, 2 on page 2-2
.
Note Left cover 3 is located on the left side of the paper feeder for use in clearing paper jams.
Built-in Finisher
The built-in finisher holds a large quantity of finished prints. The finisher offers a convenient means of sorting. Sorted finished prints may also be stapled.
1 3 5 6
2
4
1 Ejected paper guide extension
2 Ejected paper guide 1
3 Ejected paper guide 2
4 Finisher tray
5 Process table
6 Finisher tray extension
4-3
4-4
Note Sorted copies are delivered onto the finisher tray.
Adjust the ejected paper guide extension to the size of the paper.
The paper sizes are marked on the ejected paper guide extension. Open ejected paper guides 1 and 2 as necessary to accommodate the size of the paper.
When stapling 11 × 17", 8 1/2 × 14", A3 or B4 paper, open the finisher tray extension to ensure that the paper does not fall out of the tray.
Adding Staples
1
Open the front cover of the stapler.
Optional Equipment
Optional Equipment
2
Pull out the staple holder.
3
Remove the empty staple case from the staple holder.
4
Holding the staple holder in your left hand, insert a new staple case with your right hand in the direction of the arrow.
5
Insert the staple case as far as it will go. Pull of the paper tape wound around the staple case.
6
Reinsert the staple holder into the slot of the staple unit. The staple holder clicks locked when fully inserted.
Clearing Staple Jams
1
Pull out the staple holder referring to steps 1 and 2 of Adding
4-5
4-6
A
2
Lift the face plate up by tab A .
3
Remove the jammed staple from the end of the cartridge (stapleloaded side).
4
Lower the face plate back.
5
Insert the face plate back in place. The face plate clicks locked when fully inserted.
6
Lift the staple unit slightly, then lower it and insert it again into its place.
7
Close the stapler front cover.
Document Finisher
The document finisher holds a large quantity of finished copies. The finisher offers a convenient means of sorting. Sorted finished copies may also be stapled. For further details, refer to the Document Finisher
Operation Guide .
Job Separator
Separate paper according to output tray for easier sorting. Specify as the output tray for copy or print jobs. You can also specify the default mode output destination used for copies and received faxes.
There is a paper indicator in the front of the machine that shows whether there is paper in the job separator.
IMPORTANT Note that some media types have a tendency to curl and may jam in the paper eject unit.
If the ejected paper slips or stacks unevenly, turn the paper in the cassette over and try again.
Optional Equipment
Optional Equipment
Note To ensure that paper is delivered to the job separator, select the output destination or change the default setting. (For details, refer to Chapter 1 Selecting Output Destination and Chapter 3
Machine Default in the Advanced Operation Guide .)
When removing paper from the job separator, pull it out at an angle to avoid catching the corners of the paper.
Key Counter
Use the key counter to monitor machine usage. The key counter offers a convenient solution for centralized management of copy volume for different departments in a large company.
Inserting the Key Counter
Insert the key counter securely into the key counter slot.
Note When the key counter function is activated, copies can only be made when a key counter is inserted into the machine. If the key counter is not inserted securely, Insert key counter will be displayed.
Printer Kit
Install the printer kit to use the machine as a printer as well. For further details, refer to the Printer Kit Operation Guide .
4-7
Fax Kit
Install the fax kit to use the machine as a fax as well. For further details, refer to the Fax Kit Operation Guide .
4-8 Optional Equipment
5 Maintenance
This chapter describes cleaning and toner replacement.
Original Cover, Document Processor and Platen .................... 5-2
Slit Glass ................................................................................. 5-2
Separator................................................................................. 5-3
Transfer Roller......................................................................... 5-4
Main Charger........................................................................... 5-5
Toner Container and Waste Toner Box Replacement 5-7
Maintenance 5-1
Cleaning
Clean the machine regularly to ensure optimum copy quality.
CAUTION For safety, always unplug the power cord before cleaning the machine.
Original Cover, Document Processor and Platen
Wipe the rear side of the optional document processor or original cover and the platen with a soft cloth dampened with alcohol or diluted mild detergent.
IMPORTANT Do not use thinner or other organic solvents.
Original Cover (Document Processor)
Platen
5-2
Clean the slit glass for original fed from DP.
1.Open the document processor.
2.Clean the surface of the slit glass located on the left side and the reading guide on the document processor with the supplied dry cloth.
3.Close the document processor.
4.Press [END].
If the slit glass is dirty, black line will appear on the copy.
Slit Glass
If black streaks or other soiling appears in copies when the optional document processor is used, clean the slit glass and white guide with the cleaning cloth provided. The message: Clean the slit glass for original fed from DP ( Clean the slit glass for original fed ) may be displayed if the slit glass requires cleaning. After cleaning, press [End].
IMPORTANT Lightly wipe the slit glass and white guide with a dry cloth. To remove adhesive material or ink, apply alcohol to a cloth and wipe lightly. Do not use water, thinner, or organic solvents.
1
Remove the cloth from the cleaning cloth compartment.
2
Open the document processor and wipe slit glass A .
A
Maintenance
Maintenance
B
3
Wipe white guide B in the document processor.
4
Press [End].
Separator
To maintain the best possible print quality, clean the machine as described below on a regular basis (once a month).
1
Open the front cover.
2
Remove cleaning brush (blue colored).
3
Pull up left cover 1 lever and open left cover 1.
4
Run the brush from side to side along the separator as shown to remove any soiling.
5-3
5-4
5
Replace the cleaning brush and close the front cover and left cover
1.
IMPORTANT Push in the position indicated to ensure that left cover 1 is securely closed.
Transfer Roller
To maintain the best possible print quality, clean the machine as described below on a regular basis (once a month).
1
Open the front cover.
2
Remove cleaning brush (blue colored).
3
Pull up left cover 1 lever and open left cover 1.
4
Run the brush from side to side along the transfer roller as shown, rotating by the gear at the end, to remove any soiling.
Maintenance
Maintenance
5
Replace the cleaning brush and close the front cover and left cover
1.
IMPORTANT Push in the position indicated to ensure that left cover 1 is securely closed.
Main Charger
If black or white vertical streaks appear on copies, clean the main charger.
1
Open the front cover.
2
Remove the waste toner box.
3
Clean the main charger as described in steps 6 to 11 in
Container and Waste Toner Box Replacement on page 5-7 .
4
Install the waste toner box and close the front cover.
5
Press the System Menu/Counter key.
5-5
/ Counter
Language
MP Tray
Setting
Register
Orig. Size
System Menu / Counter
User adjustment
Drum refresh
Charger
Cleaning
System Menu in charger.
1.Open the front cover and then
remove the waste toner box.
2.Clean the main charger.
3.After cleaning, install the waste
toner box. Close the front cover
and press [End].
The machine executes adjustment for 5 min.
See the leaflet supplied with the toner container or Operation Guide for cleaning.
End
Job
Accounting
Report
Check the counter
User
Adjustment
End
6
Press [User Adjustment].
7
Press [Charger Cleaning].
8
Press [End]. Adjustment begins. Wait 5 minutes.
5-6 Maintenance
Maintenance
Toner Container and Waste Toner Box
Replacement
When the touch panel displays Add toner , replace the toner without delay even if several more copies are still possible. When replacing the toner container, replace the waste toner box as well.
Each time you replace the toner container, be sure to clean the parts as instructed below. Dirty parts may deteriorate output quality.
CAUTION Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks may cause burns.
CAUTION Do not attempt to force open or destroy the toner container or the waste toner box.
1
Open the front cover.
WARNING High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock.
2
Remove the waste toner box.
3
Peel the sticker off the waste toner box and remove the cap.
5-7
5-8
4
Fit the cap into the opening in the waste toner box and attach the sticker over the cap.
5
Place the used waste toner box in the provided plastic disposal bag.
CAUTION Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks may cause burns.
CAUTION Do not attempt to force open or destroy the toner container or the waste toner box.
6
Pull the cleaner rod out slowly as far as it will go, and then push it back in.
Repeat 2 or 3 times.
IMPORTANT Do not pull strongly on the rod or pull it out completely.
7
Hold the main charger to the right and pull out about 5 cm (2 inches).
8
Take the grid cleaner provided out of its bag and remove the cap.
Maintenance
Maintenance
9
Align the grid cleaner with the notch and attach it to the machine.
A
10
While gently holding the grid cleaner in place with your left hand, pull the main charger out fully and then push it back to a position where the roller A does not quite reach the white pad on the grid cleaner.
Repeat 2 or 3 times.
IMPORTANT When pushing the main charger back in, take care not to push it all the way in. This could result in damage to copies.
11
With the main charger pulled out about 5 cm (2 inches), remove the grid cleaner. Then push the main charger back in fully, applying pressure in the direction shown by the arrow so that the main charger is in its designated position.
12
Install a new waste toner box.
13
Remove cleaning brush (blue colored).
5-9
5-10
14
Pull up left cover 1 lever and open left cover 1.
15
Run the brush from side to side along the separator as shown to remove any soiling.
16
Run the brush from side to side along the transfer roller as shown, rotating by the gear at the end, to remove any soiling.
17
After cleaning, replace the cleaning brush and close left cover 1.
IMPORTANT Push in the position indicated to ensure that left cover 1 is securely closed.
18
Push the toner container stopper to the right and pull out the old toner container.
IMPORTANT Do not pull the toner container out completely as it could drop onto the floor.
Maintenance
Maintenance
19
Hold the toner container in both hands and remove slowly.
20
Place the used toner container in the provided plastic disposal bag.
5~
5~
5~
21
Hold the new toner container upright and tap the top of the container
5 or more times.
Then turn the container the other way up and again tap the top of the container 5 or more times.
5~
22
Then shake the toner container up and down 5 or more times.
Again turn the container the other way up and shake it another 5 or more times.
23
Shake the toner container from side to side 5 or more times so that the toner inside the container is distributed evenly.
5~
5-11
5-12
24
Hold the new toner container in both hands and gently push it into the machine.
25
Using both hands, push the toner container in until it locks.
26
Open the MP tray.
27
Remove the filter.
28
Remove dust from the filter using a vacuum cleaner or dry cloth.
IMPORTANT Do not wash the filter with water. Do not use the attached cleaning brush.
29
Put the filter back in place and close the MP tray.
30
Close the front cover.
31
When Replaced the toner container?
appears, press [Yes].
32
When Cleaned the main charger?
appears, press [Yes].
33
Adjustment begins. Wait 5 minutes.
After use, always dispose of the toner container and the waste toner box in accordance with Federal, State and Local rules and regulations.
Maintenance
6 Troubleshooting
This chapter explains how to solve problems with the machine.
Responding to Error Messages 6-4
Jam Location Indicators........................................................... 6-8
Paper Jam Precautions ........................................................... 6-9
Cassette 1 ............................................................................... 6-9
Cassette 2 ............................................................................. 6-10
Optional Cassettes 3 and 4 ....................................................6-11
MP Tray ................................................................................. 6-12
Inside the Left Covers 1, 2 and 3........................................... 6-12
Duplex Unit ............................................................................ 6-13
Duplex Unit and Cassette 1................................................... 6-13
Paper Feed Unit .................................................................... 6-14
Optional Built-in Finisher ....................................................... 6-16
Optional Document Processor............................................... 6-18
Optional Document Finisher .................................................. 6-19
Optional Job Separator.......................................................... 6-19
Troubleshooting 6-1
Solving Malfunctions
The table below provides general guidelines for problem solving.
If a problem occurs with your machine, check the checkpoints and perform procedures indicated on the following pages. If the problem persists, contact your Service Representative.
Symptom Checkpoints Corrective Actions
Reference
Page
The operation panel does not respond when the machine is turned on ( | position).
Pressing the Start does not produce copies.
The original size is not detected properly.
key
Blank sheets are output.
Copies are too light.
Copies are too dark.
Copies have a moire pattern (dots grouped together in patterns and not aligned uniformly).
Copies are not clear.
Is the machine plugged in?
Is a message displayed on the touch panel?
Are the originals loaded correctly?
Is the machine installed beneath fluorescent lights?
Are the originals loaded correctly?
Plug the power cord into an AC outlet. —
Determine the appropriate response to the message and take action accordingly.
When placing originals on the platen, place them face-down and align them with the original size indicator plates.
Place originals face-up in the optional document processor.
Do not install this machine beneath fluorescent lights.
When placing originals on the platen, place them face-down and align them with the original size indicator plates.
Place originals face-up in the optional document processor.
Is the machine installed beneath fluorescent lights?
Do not install this machine beneath fluorescent lights.
Is the machine set to Manual Density? Use the density adjustment key to set the correct density.
Is the toner distributed evenly within the toner container?
Is there a message indicating the addition of toner?
Is the paper damp?
Shake the toner container up and down approximately 10 times.
Replace the toner container.
Replace the paper with new paper.
Is the machine set to Manual Density? Use the density adjustment key to set the correct density.
Is the original a printed photograph?
Set the original image to [Photo].
—
—
Copies are dirty.
Copies are fuzzy.
Did you choose appropriate image quality for the original?
Select an appropriate original image mode.
Is the paper damp?
Replace the paper with new paper.
Are the original cover or platen dirty? Clean the original cover or platen glass.
Is the paper damp?
Replace the paper with new paper.
6-2 Troubleshooting
Symptom
Copies are skewed.
Paper jams frequently occur.
Checkpoints Corrective Actions
Are the originals loaded correctly?
Is the paper loaded correctly?
Is the paper loaded correctly?
Is the paper of the supported type? Is it in good condition?
Is the paper curled, folded, or wrinkled?
Are there any loose scraps or jammed paper in the machine?
Is the paper damp?
Is the slit glass dirty?
When placing originals on the platen, place them face-down and flush against the original size indicator plates.
When placing originals in the document processor, align the original width guides securely before placing the originals.
Check the position of the paper width guides.
Load the paper correctly.
Remove the paper from the cassette, turn it over, and reload it.
Replace the paper with new paper.
Remove any jammed paper.
Replace the paper with new paper.
Clean the slit glass.
Reference
Page
page 2-2 page 2-2 page 2-2 page 2-2
Copies from the optional document processor have black lines.
Copies are wrinkled. Is the separator dirty?
Is the paper damp?
Clean the separator.
Replace the paper with new paper.
Is the paper set in a proper orientation? Change the orientation in which the paper is positioned.
—
Troubleshooting 6-3
Responding to Error Messages
If the touch panel displays any of these messages, follow the corresponding procedure.
Error Messages
Close ### cover.
Check the cover.
Close Document Processor.
Close Document processor cover.
Set cassette #.
( Close paper cassette #.
)
Open cassette #, check and remove paper from inside of the machine.
( Open cassette #, check and remove paper from inside of machine.
)
Reset feeding unit for paper cassette.
Checkpoints
Is the indicated cover open?
Are any covers open?
Does the message indicate which cover is open?
Is the optional document processor open while loading the original?
Is the optional document processor top cover open?
Is the indicated cassette not fully closed?
—
Is the paper feeder securely pushed into the machine?
Corrective Actions
Close all covers securely.
Close all covers securely.
Close the document processor.
Close the document processor top cover.
Pull out the cassette and push in securely.
Completely pull out the indicated cassette and remove any paper inside.
Reference Page
—
—
—
—
—
Add paper in cassette #.
( Add paper cassette #.
)
Is the indicated cassette out of paper?
Pull out the paper feeder and securely push it all the way into the machine.
Load paper. If the same type of paper is loaded in another cassette in the same orientation, you can press either one of paper selection keys on the left of the touch panel to switch to that cassette for copying.
Load paper of the size indicated in the MP tray.
—
Add paper in the Multi Purpose
Tray.
## size
( Place paper on the Multi
Purpose Tray.
## size )
Add paper in the Multi Purpose
Tray.
( Add paper on the Multi Purpose
Tray.
)
Change the size of MP tray.
Is paper of the specified size loaded in the MP tray?
Has all the paper on the MP tray been fed?
Check paper size.
Reposition original.
Is the specified size paper loaded in the MP tray?
Is the specified size paper loaded?
Is the orientation of the specified paper different from that of the original?
Load paper in the MP tray.
Reconfigure the size of the MP tray.
Load paper of a size that can be used.
Change the orientation of the original. If you press the Start key without doing so, the original will be copied at the current size.
—
—
6-4 Troubleshooting
Error Messages
Check paper size. Copy paper is not the same size as original.
( Paper size in cassette differs from actual size.
Check paper size in cassette.
)
Reposition original or change cassette.
( paper cassette.
Reset originals in processor.
Reset all originals in processor.
( Reset originals in processor.
)
Checkpoints
Is the specified paper loaded?
Or are the settings incorrect?
Corrective Actions
Load the specified paper. Adjust any settings that are incorrect.
Reference Page
—
Is the orientation of the specified paper different from that of the original?
Is the copier installed beneath fluorescent lights?
—
—
Change the orientation of the original.
Do not install this machine beneath fluorescent lights.
Remove originals from the optional document processor, stack them uniformly and reset them.
Remove originals from the optional document processor, and reset them in the original order.
Reset all originals in the optional document processor.
—
—
— Reset all originals in Document
Processor.
( Reset originals in Document
Processor.
)
Are there any originals left in the optional document processor?
Cannot copy this paper type.
Can the specified copy functions be used with the selected media type?
Cannot staple this paper type.
Did you select a media type that cannot be stapled?
Cannot staple this size.
( Cannot staple this paper size.
Cannot staple.
## :maximum capacity (Staple)
(
Reset original or select another
Cannot staple.
)
## :Max. staples )
)
The top tray is full of paper.
Remove paper, and press Start key.
The top tray is full of paper.
Remove paper, and press
Continue key.
Paper capacity exceeded.
(Finisher)
Remove paper, and press Start key.
Paper capacity exceeded.
(Finisher)
Remove paper, and press
Continue key.
Is stapling available for the size of the loaded paper?
Is the maximum page quantity for stapling exceeded?
During copying, is the maximum capacity of the top tray exceeded?
During printing, is the maximum capacity of the top tray exceeded?
During copying, is the maximum capacity of the optional document finisher output tray exceeded?
During printing, is the maximum capacity of the optional document finisher output tray exceeded?
Select another type of media.
Select another type of media.
Change the paper size.
Decrease the number of sheets to be stapled to less than the maximum staple sheet count.
Remove some pages from the top tray and press the Start key.
Printing continues.
Remove some pages from the top tray and press [Continue].
Printing continues.
Remove some pages from the optional document finisher and press the Start key. Printing continues.
Remove some pages from the optional document finisher and press [Continue]. Printing continues.
—
Refer to the optional Document
Finisher Operation
Guide .
Refer to the optional Document
Finisher Operation
Guide .
Refer to the optional Document
Finisher Operation
Guide .
—
—
—
—
Troubleshooting 6-5
Error Messages
Remove paper. Finisher tray.
These functions cannot be combined.
Insert key counter.
Memory full
Toner will be empty soon.
Ready to copy.
Add toner.
Add toner.
Set the toner container.
Clean the main charger.
Image cycle.
(
Replace the waste toner box.
Clean the slit glass for original fed from DP.
( Clean the slit glass for original fed.
)
Install duplex unit.
Is the waste toner box securely fastened?
—
—
(
Now adding toner.
Out of staples.
Add staples.
Stapler empty.
Add staples.
)
)
Please wait.
Now in the fusing temperature adjustment process.
Check waste toner box.
Checkpoints
Is the maximum capacity of the optional document finisher output tray exceeded?
Have you selected functions that cannot be used together?
Is the optional key counter inserted correctly?
—
—
—
—
Is the toner container securely installed?
Have you cleaned the main charger?
—
—
Corrective Actions
Remove some pages from the optional document finisher.
Check the settings.
Insert the optional key counter securely and completely.
The current copy cannot be processed because there is no more copy memory free space, or the number of original pages exceeded the maximum 999 pages. When the following message is displayed select the resolution method.
[Cancel]: Cancels copying.
[Continue]: Copies up to the last scanned page.
The toner container will need to be replaced soon. Prepare the replacement toner container.
The machine is running low on toner; only one page may be printed at a time. Prepare the replacement toner container.
Replace the toner container.
Open the front cover and pull the toner container out. Shake the container well and set back in place.
Clean the main charger after replacing the toner container.
After cleaning, press [End].
Adjustment begins. Wait 5 minutes.
Toner replenishment is in progress. Wait until the process is completed.
Performing internal maintenance. Wait until the process is completed.
Securely fasten the waste toner box.
Replace the waste toner box.
Rub the slit glass with the included dry cleaning cloth.
Reference Page
—
—
—
—
page 5-7 page 5-7 page 5-7 page 5-7 page 5-7
—
—
Is the duplex unit securely installed?
Is the optional document finisher or built-in finisher out of staples?
Open left cover 1 and install the duplex unit in place securely.
Refill staples.
—
Refer to the optional Document
Finisher Operation
Guide.
6-6 Troubleshooting
Error Messages
Time for maintenance.
Paper misfeed.
Remove paper from inner tray of
Finisher.
Staple jam.
System error.
Call service.
Paper cassette is out of order.
Select another paper cassette.
( Paper cassette is out of order.
Select other paper cassette.
System error.
Main Power Switch Off / On.
Please wait.
Remote edit.
( Please wait.
Remote editing.
)
)
Checkpoints
—
—
Is there any paper left in the optional document finisher?
Is the optional document finisher or built-in finisher experiencing a staple jam?
Is it re-displayed after opening and closing the front cover, turning off and on the main power switch, and plugging out and plugging in the power plug in the power outlet?
—
—
Is Job account editing being done from a network connected computer?
Corrective Actions
Periodic maintenance is required to keep your machine in good condition. Contact your
Service Representative or
Authorized Service Center promptly.
If a paper jam occurs, the location of the jam will be indicated on the touch panel and the machine will stop. Leave the machine switched on (| position) and follow the instructions to remove the jammed paper.
Remove all paper left in the optional document finisher.
Remove the jammed staple.
Reference Page
—
—
Refer to the optional Document
Finisher Operation
Guide .
— Make a note of this message ( C followed by a number). Turn off the machine ( position), unplug the power cord, and contact your Service
Representative or Authorized
Service Center.
The cassette in use has a problem and is temporarily unavailable. Contact your
Service Representative or
Authorized Service Center promptly. To continue copying, use another cassette.
A system error has occurred.
Turn the main power switch off and on again.
Copying is not possible until editing is complete.
—
—
—
Troubleshooting 6-7
6-8
Paper misfeed.
Clearing Paper Jams
1.Open left cover 1 of the m and remove any paper that
2.Open cassette 1.
3.Remove the paper.
4.Reset the cassette and close the cover.
If a paper jam occurs, the touch panel will display Paper misfeed and the copying will stop. Refer to these procedures to remove the jammed paper.
JAM 00
Jam Location Indicators
When a paper jam occurs, the jam location indicators and corrective action are displayed. Jam location indicators indicate the paper jam position, as shown below.
Paper misfeed.
JAM 00
1.Open left cover 1 of the machine and remove any paper that is inside.
2.Open cassette 1.
3.Remove the paper.
4.Reset the cassette and close the cover.
I I
J J
E
K
J E
F
F
C
C
A
B
G
D
H
E
K
E
F
F
C
C
A
B
G
D
Jam Location
Indicators
A
D
E
B
C
F
I
J
G
H
K
Paper Jam Location
Cassette 1
Cassette 2
Optional cassettes 3 and 4
MP tray
Duplex unit, Inside the left cover 1
Inside the left covers 2 and 3
Paper feed unit
Optional built-in finisher
Optional document processor
Optional document finisher
Optional job separator
Reference
Page
After clearing the jam, the machine will warm up again and the error message will be cleared. The machine resumes from the page on which the jam occurred.
Troubleshooting
Troubleshooting
Paper Jam Precautions
• Do not reuse paper cleared from a jam.
• If the paper was torn during removal, be sure to remove any loose scraps of paper from the machine inside. Scraps of paper left in the machine may cause subsequent jamming.
• Jammed paper from the document finisher (option) will be fed out again. Do not return this paper to the document finisher tray.
WARNING High voltage is present in the charger section.
Take sufficient care when working in this area, as there is a danger of electrical shock.
CAUTION The fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned.
Cassette 1
Follow the steps below to clear paper jams in cassette 1.
1
Pull up left cover 1 lever and open left cover 1.
2
Remove the jammed paper.
3
Pull out cassette 1.
6-9
6-10
4
Remove the jammed paper.
If the paper tears, remove every loose scrap from inside the machine.
5
Push cassette 1 securely back in place.
6
Press the indicated position to close left cover 1.
Cassette 2
Follow the steps below to clear paper jams in cassette 2.
1
Open left cover 2.
2
Remove the jammed paper.
3
Pull out cassette 2.
Troubleshooting
Troubleshooting
4
Remove the jammed paper.
If the paper tears, remove every loose scrap from inside the machine.
5
Push cassette 2 securely back in place.
6
Close left cover 2.
Optional Cassettes 3 and 4
Follow the steps below to clear paper jams in cassettes 3 or 4 when using the optional paper feeder.
1
Open left cover 3.
2
Remove the jammed paper.
If the paper tears, remove every loose scrap from inside the machine.
3
Pull out the cassette in use.
4
Remove the jammed paper.
5
Push the cassette securely back in place.
6
Close left cover 3.
6-11
6-12
MP Tray
Follow the steps below to clear paper jams in the MP tray.
1
Remove all papers from the MP tray.
2
If paper is jammed inside, pull the paper toward you to remove.
Inside the Left Covers 1, 2 and 3
Follow the steps below to clear paper jams inside left cover 1, 2 or 3
(option).
1
Open the left cover where paper is jammed inside.
2
Remove the jammed paper.
If the paper tears, remove every loose scrap from inside the machine.
3
Close the left cover.
Troubleshooting
Troubleshooting
Duplex Unit
Follow the steps below to clear paper jams in the duplex unit.
1
Pull up left cover 1 lever and open left cover 1.
2
Remove the jammed paper.
3
Lift up the duplex unit and remove the jammed paper.
4
Press the indicated position to close left cover 1.
Duplex Unit and Cassette 1
Follow the steps below to clear paper jams in duplex unit and cassette 1.
1
Pull up left cover 1 lever and open left cover 1.
6-13
6-14
2
Remove the jammed paper.
3
Lift up the duplex unit and remove the jammed paper.
4
Pull out cassette 1 and remove the jammed paper.
If the paper tears, remove every loose scrap from inside the machine.
5
Push cassette 1 securely back in place.
6
Press the indicated position to close left cover 1.
Paper Feed Unit
Follow the steps below to clear paper jams in the paper feed unit.
1
Pull up left cover 1 lever and open left cover 1.
Troubleshooting
Troubleshooting
2
Remove the jammed paper.
If the paper tears, remove every loose scrap from inside the machine.
3
Open the front cover.
4
Turn the lower green knob (A1) clockwise.
5
Remove the jammed paper.
If you cannot remove the paper, proceed with the next step.
6
Pull out the paper feed unit (A2) .
6-15
6-16
7
Open the paper feed unit cover (A3) and remove the jammed paper.
8
Push the paper feed unit (A2) back in place, and close the front cover.
9
Press the indicated position to close left cover 1.
(1)
(2)
Optional Built-in Finisher
Follow the steps below to clear paper jams in the optional built-in finisher.
1
Remove any paper left in the finisher output slot.
2
Remove the output tray.
3
Pull up left cover 1 lever and open left cover 1.
4
Remove the jammed paper.
Troubleshooting
(2)
(1)
5
Press the indicated position to close left cover 1.
6
Reattach the output tray.
7
Turn the dial to lower the finisher process tray.
8
Remove any paper from the tray.
9
Push the tray upward back into place.
Troubleshooting 6-17
6-18
Optional Document Processor
Follow the steps below to clear paper jams in the optional document processor.
1
Remove the original from the original tray.
2
Open the document processor top cover.
3
Remove the jammed original.
A
4
Lift up the paper feed unit A .
5
Remove the jammed original.
If the original tears, remove every loose scrap from inside the machine.
6
Remove the original by turning the dial as shown.
7
Put the paper feed unit A back in place and close the document processor top cover.
8
Reload the originals on the document processor tray.
Troubleshooting
Troubleshooting
Optional Document Finisher
If a misfeed occurs in the optional document finisher, refer to the
Document Finisher Operation Guide to clear the jam.
Optional Job Separator
Follow the steps below to clear paper jams in the optional job separator.
1
If jammed paper can be seen through the paper output slot, pull it out toward you.
If the paper tears, remove every loose scrap from inside the machine.
2
Pull up left cover 1 lever and open left cover 1.
3
Remove the jammed paper.
If the paper tears, remove every loose scrap from inside the machine.
4
Press the indicated position to close left cover 1.
6-19
6-20 Troubleshooting
7 Appendix
This chapter explains how to enter text, describes the paper types that can be used with the machine and lists the machine specifications.
Entering Characters on Touch Panel 7-2
Body ........................................................................................ 7-6
Document Processor (option).................................................. 7-8
Paper Feeder (option) ............................................................. 7-8
Document Finisher (option) ..................................................... 7-9
Built-in Finisher (option)........................................................... 7-9
Job Separator (option)........................................................... 7-10
Environmental Specifications................................................. 7-10
Appendix 7-1
7-2
Entering Characters on Touch Panel
To enter characters on the touch panel such as department names (for job accounting) or copying programs, etc., use the following procedures.
Input Screen
Inch models
Keyboard
1 6 7 9 10
Name to display Stop End
Char.Limit:32 including #
AllDel.
Del. prev
8
Capital Letter Num./Sym.
Space
2 3 4 5
1 Character display: Displays the characters entered.
2 [Capital]: Press this key to enter capital letters.
3 [Letter]: Press this key to enter lowercase letters.
4 [Num./Sym.]: Press this key to enter the numeric and symbols.
5 [Space]: Press this key to enter a space.
6 [AllDel.]: Press this key to delete all characters entered.
7 [ ][ ]: Press these keys to move the cursor left and right.
8 [Del. prev]: Press this key to delete the character to the left of the cursor.
9 [Stop]: Press this key to return to the previous screen.
10 [End]: Press this key to confirm the characters you entered.
Capital keyboard
Name to display Stop End
Char.Limit:32 including #
AllDel.
Del. prev
Capital Letter Num./Sym.
Space
Appendix
Appendix
Numeral/Symbol keyboard
Name to display
Char.Limit:32 including #
AllDel.
Stop End
Del. prev
Capital Letter Num./Sym.
Metric Models
Keyboard
1
Name to display
Space
7 8
Char.Limit:32 including #
AllDel.
10
Stop
11
End
Del. prev 9
Capital Letter Symbol 1 Symbol 2 Space
2 3
Name to display
4 5 6
1 Character display: Displays the characters entered.
2 [Capital]: Press this key to enter capital letters.
3 [Letter]: Press this key to enter lowercase letters.
4 [Symbol 1]: Press this key to enter the numeric and symbols.
5 [Symbol 2]: Press this key to enter other symbols.
6 [Space]: Press this key to enter a space.
7 [AllDel.]: Press this key to delete all characters entered.
8 [ ][ ]: Press these keys to move the cursor left and right.
9 [Del. prev]: Press this key to delete the character to the left of the cursor.
10 [Stop]: Press this key to return to the previous screen.
11 [End]: Press this key to confirm the characters you entered.
Capital keyboard
Stop End
Char.Limit:32 including #
AllDel.
Del. prev
Capital Letter Symbol 1 Symbol 2 Space
7-3
7-4
Name to display
A|
Symbol 1 keyboard
Name to display
Char.Limit:32 including #
AllDel.
Stop End
Del. prev
Capital Letter Symbol 1 Symbol 2
Symbol 2 keyboard
Name to display
Space
Char.Limit:32 including #
AllDel.
Stop End
Del. prev
Capital Letter Symbol 1 Symbol 2
Space
Char.Limit:32 including #
AllDel.
Entering Characters
Sto
The following is an example of how to enter ‘Abcde’ using the keyboard.
1
Press [Capital] and press [A] on the keyboard.
Capital
Name to display
A
Letter Num./Sym.
Space
Char.Limit:32 including #
AllDel.
Sto
2
Press [Letter].
Capital
Name to display
Abcde
Letter Num./Sym.
Space
Char.Limit:32 including #
AllDel.
Sto
3
Press [b], [c], [d] and [e] in order.
4
When entering all characters are complete, press [End].
Capital Letter Num./Sym.
Space
Appendix
Supported types
Plain paper (60 to 120 g/m²)
Recycled paper (60 to 120 g/m²)
Plain paper (60 to 120 g/m²)
Recycled paper (60 to 120 g/m²)
Supported types
Plain paper (45 to 200 g/m²)
Recycled paper (45 to 200 g/m²)
Colored paper (45 to 200 g/m²)
Transparency
Postcards
OUFUKU HAGAKI (return postcard)
Envelopes
Paper
This section explains the paper sizes and types that can be used in the paper source.
Cassettes 1 and 2 and the optional paper feeder
Supported paper sizes
11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11",
5 1/2 × 8 1/2", 8 1/2 × 13" (Oficio II), 8 1/2 × 13 1/2", 8K,
16K, 16KR
A3, B4, A4, A4R, B5, B5R, A5R, Folio
No. of sheets
500 (80 g/m²)
500 (80 g/m²)
MP tray (Multi Purpose tray)
Supported paper sizes
11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11",
5 1/2 × 8 1/2", 8 1/2 × 13" (Oficio II), 8 1/2 × 13 1/2",
Executive, A3, B4, A4, A4R, B5, B5R, A5R, B6R, 8K,
16K, 16KR
Other sizes:
Portrait - 3 7/8 to 11 5/8" or 98 to 297 mm
Landscape - 5 7/8 to 17" or 148 to 432 mm
11 × 8 1/2", A4, A4R
Postcards (100 × 148 mm)
Return postcard (148 × 200 mm)
Envelope DL, Envelope C5, Envelope C4, Comm. #10,
Comm. #9, Comm. #6-3/4, Monarch, ISO B5, Youkei 2,
Youkei 4
Other sizes:
Portrait - 3 7/8 to 11 5/8" or 98 to 297 mm
Landscape - 5 7/8 to 17" or 148 to 432 mm
No. of sheets
200 (80 g/m²)
25
80
20
Appendix 7-5
Specifications
Note These specifications are subject to change without notice.
Item
Type
Copying Method
Supported Original Types
Original Feed System
Paper Weight Cassette 1, 2
Media Type
MP Tray
Cassette 1, 2
MP Tray
Paper Size Cassette 1, 2
MP Tray
Zoom Level
Copying Speed Simplex
Duplex
First Copy Time (A4, feed from
Cassette)
Warm-up Time
(22°C/71.6°F,
60%)
Power on
Low Power
Sleep
Body
Description
25 cpm model 30 cpm model
Desktop
Electrophotography by semiconductor laser
Sheet, Book, 3-dimensional objects (maximum original size: 11 × 17"/A3)
Fixed
60 to 120 g/m² (Duplex: 60 to 80 g/m²)
45 to 200 g/m²
Plain, Rough, Vellum, Recycled, Preprinted, Bond, Color (Colour), Prepunched,
Letterhead, Thick paper, High Quality, Custom 1 to 8 (Duplex: Same as
Simplex)
Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond,
Cardstock, Color (Colour), Prepunched, Letterhead, Thick paper, Envelope,
High Quality, Custom 1 to 8
Maximum: 11 × 17"/A3 (Duplex: 11 × 17"/A3)
Minimum: 5 1/2 × 8 1/2"/A5R (Duplex: 5 1/2 × 8 1/2"/A5R)
Maximum: 11 × 17"/A3
Minimum: 5 1/2 × 8 1/2"/A6R
Manual mode: 25 to 400%, 1% increments
Auto mode: Preset Zoom
11 × 17"/A3: 12.5 sheets/min
8 1/2 × 14"/B4: 12.5 sheets/min
11 × 8 1/2"/A4: 25 sheets/min
8 1/2 × 11"/A4R: 17.5 sheets/min
B5: 25 sheets/min
B5R: 20 sheets/min
11 × 17"/A3: 9 sheets/min
8 1/2 × 14"/B4: 9 sheets/min
11 × 8 1/2"/A4: 19 sheets/min
8 1/2 × 11"/A4R: 10 sheets/min
B5: 20 sheets/min
B5R: 11 sheets/min
4.7 seconds or less
11 × 17"/A3: 15 sheets/min
8 1/2 × 14"/B4: 15 sheets/min
11 × 8 1/2"/A4: 30 sheets/min
8 1/2 × 11"/A4R: 22 sheets/min
B5: 30 sheets/min
B5R: 20 sheets/min
11 × 17"/A3: 9 sheets/min
8 1/2 × 14"/B4: 10 sheets/min
11 × 8 1/2"/A4: 20 sheets/min
8 1/2 × 11"/A4R: 11 sheets/min
B5: 21 sheets/min
B5R: 11 sheets/min
15 seconds or less
10 seconds or less
15 seconds or less
7-6 Appendix
Power Source
Power Consumption
Options
Description
Item
30 cpm model
Paper Capacity
Output Tray
Capacity
Cassette 1, 2
MP Tray
Top tray with optional builtin finisher
Continuous Copying
Image Write System with optional job separator
Image Storage Memory
Resolution
Monthly Duty Average
Maximum
Operating
Environment
Temperature
Humidity
Altitude
Brightness
Dimension (W × D × H)
150 sheets (80 g/m²)
1 to 999 sheets
Semiconductor laser and electrophotography
64 MB (standard)
600 × 600 dpi
8,000 pages
80,000 pages
10 to 32.5°C/50 to 90.5°F
10,000 pages
100,000 pages
15 to 80 %
2,500 m/8,202 ft maximum
1,500 lux maximum
22 7/16 × 25 3/16 × 30 3/16" (Main unit only)
570 × 640 × 767.2 mm
165 lb/75 kg Weight (without toner container and waste toner box)
Space Required (W × D)
25 cpm model
500 sheets (80 g/m²)
200 sheets (80 g/m²)
250 sheets (80 g/m²)
100 sheets (80 g/m²)
28 9/16 × 25 3/16" (Using MP tray)
725 × 640 mm
120 V AC, 60 Hz, 11.2 A/220 to 240 V AC, 50 Hz, 6.0 A
1360 W
Document processor, Paper feeder, Document finisher, Built-in finisher, Job separator, Key counter, Printer kit and Fax kit
Appendix 7-7
Item
Original Feed Method
Paper Weight
Supported Original Types
Paper Size
Original No. of Sheets
Device Dimensions (W × D × H)
Weight
Item
Paper Supply Method
Paper Weight
Media Type
Paper Size
Dimensions (W × D × H)
Weight
Document Processor (option)
Description
Automatic feed
45 to 160 g/m²
Sheet originals
Maximum: 11 × 17"/A3
Minimum: 5 1/2 × 8 1/2"/A5R
75 sheets or less (50 to 80 g/m²)
Mixed original sizes: 30 sheets or less (50 to 80 g/m²)
22 × 19 3/16 × 5 3/16"
559 × 487 × 131 mm
15.4 lb or less/7 kg or less
Paper Feeder (option)
Description
Friction Feed (No. Sheets: 500, 80 g/m², 2 cassettes)
60 to 120 g/m²
Plain, Rough, Vellum, Recycled, Preprinted, Bond, Color (Colour),
Prepunched, Letterhead, Thick paper, High Quality, Custom 1 to 8
11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11", 5 1/2 × 8 1/2",
8 1/2 × 13" (Oficio II), 8 1/2 × 13 1/2", A3, B4, A4, A4R, B5, B5R, A5R,
Folio, 8K, 16K, 16KR
22 7/16 × 24 3/8 × 12 3/16"
570 × 618.7 × 309 mm
55 lb or less/25 kg or less
7-8 Appendix
Item
Number of Trays
Paper Weight
Paper Size and Maximum Sheets (Nonstapling)
Maximum Sheets for Stapling (Paper weight
80 g/m² or less)
Dimensions (W × D × H)
Weight
Document Finisher (option)
Description
1 tray
Stapling: 80 g/m² or less
11 × 17", 8 1/2 × 14", 8 1/2 × 13" (Oficio II), 8 1/2 × 13 1/2", A3, B4,
Folio, 8K: 500 sheets
11 × 8 1/2", 8 1/2 × 11", A4, A4R, B5, 16K: 1000 sheets
11 × 17", 8 1/2 × 14", 8 1/2 × 13" (Oficio II), 8 1/2 × 13 1/2", A3, B4,
Folio, 8K: 20 sheets
11 × 8 1/2", 8 1/2 × 11", A4, A4R, B5, 16K: 30 sheets
22 × 20 11/16 × 36 1/16"
558 × 526 × 916 mm
Approx. 55 lb/Approx. 25 kg
Item
Number of Trays
Paper Weight
Paper Size and Maximum Sheets (Nonstapling)
Maximum Sheets for Stapling (Paper weight
80 g/m² or less)
Dimensions (W × D × H)
Weight
Built-in Finisher (option)
Description
1 tray
60 to 105 g/m² or less
11 × 17", 8 1/2 × 14", 8 1/2 × 13" (Oficio II), 8 1/2 × 13 1/2", A3, B4,
Folio, 8K: 250 sheets
11 × 8 1/2", 8 1/2 × 11", A4, A4R, B5, 16K: 500 sheets
11 × 17", 8 1/2 × 14", 8 1/2 × 13" (Oficio II), A3, B4, Folio, 8K:
20 sheets
11 × 8 1/2", 8 1/2 × 11", A4, A4R, B5, 16K: 30 sheets
12 13/16 × 17 11/16 × 6 1/2"
325 × 450 × 165 mm
17.6 lb or less/8 kg or less
Appendix 7-9
Item
Number of Trays
Paper Weight
Media Type
Paper Size
Maximum Sheets
Device Dimensions (W × D × H)
Weight
Job Separator (option)
Description
1 tray
45 to 160 g/m²
Plain, Rough, Vellum, Recycled, Bond, Color (Colour), Thick paper
11 × 17", 8 1/2 × 14", 11 × 8 1/2", 8 1/2 × 11", 7 1/4 × 10 1/2",
5 1/2 × 8 1/2", 8 1/2 × 13" (Oficio II), 8 1/2 × 13 1/2", A3, B4, A4, A4R,
B5, B5R, A5R
100 sheets (80 g/m²)
Bond, Thick paper: 20 sheets
21 7/16 × 17 11/16 × 2 3/4"
545 × 450 × 70 mm
Approx. 3.3 lb/Approx. 1.5 kg
Environmental Specifications
Description
Item
25 cpm model 30 cpm model
Noise emission During standby
Power consumption
47 dB (A) (L wad)
During copying 64.7 dB (A) (L wad)
During copying (with full optional equipment) 1360 wh
During standby
During the Low Power mode
Recovery time from Low-Power mode
160 W or less
60 W or less
10 seconds
66.5 dB (A) (L wad)
Recovery time from Sleep mode
During the Off mode (default settings)
During the Sleep mode (with full optional equipment)
15 seconds
3.2 W or less
13 W or less
Time to Low-Power mode (factory default setting)
1 minute
Time to Sleep mode (factory default setting) 9 minutes
During the Plugged-In mode 0.1 wh or less
Power consumption in the Plugged-In mode can only be terminated by removing the power plug from the outlet.
Duplexing Standard
Paper supply capability Paper with 100 % recycled paper content may be used
Note Contact your Dealer or Service Representative for recommended media types.
7-10 Appendix
Index
A
Adjusting density ..............................................................3-5
Auto Low-Power mode ..................................................3-17
Auto Sleep mode ...........................................................3-17
B
Built-in finisher .................................................................4-3
Adding staples ..........................................................4-4
Clearing staple jams .................................................4-5
Paper jams .............................................................6-16
Specifications ............................................................7-9
C
Carrying handles ..............................................................1-4
Cassette
Cassette 1 ................................................................1-2
Cassette 2 ................................................................1-2
Loading paper ...........................................................2-2
Paper jams ................................... 6-9, 6-10, 6-11, 6-13
Specifying the media type .........................................2-8
Specifying the paper size ..........................................2-7
Caution/Warning labels .......................................................iii
Cleaner rod ......................................................................5-8
Cleaning
Main charger .............................................................5-5
Original cover, document processor and platen .......5-2
Separator ..................................................................5-3
Slit glass ...................................................................5-2
Transfer roller ...........................................................5-4
Cleaning brush .................................................................1-3
Clip holder ........................................................................1-2
Collate mode ..................................................................3-15
Conventions in this guide .................................................xvii
Copy
Adjusting density ......................................................3-5
Basic copying procedures ........................................3-2
Collate mode ..........................................................3-15
Duplex mode ..........................................................3-10
Interrupt copy ..........................................................3-16
Selecting image quality .............................................3-4
Split mode ...............................................................3-13
Zoom ........................................................................3-6
Copying speed .................................................................7-6
D
Document finisher ............................................................4-6
Paper jams .............................................................6-19
Specifications ............................................................7-9
Document processor ........................................................4-3
Cleaning ...................................................................5-2
Loading originals ....................................................2-16
Paper jams .............................................................6-18
Part names .............................................................2-15
Specifications ............................................................7-8
Duplex mode ..................................................................3-10
Duplex unit
Paper jams ..............................................................6-13
E
Energy saving control function ........................................... xi
Energy Star program .......................................................... xi
Entering characters on touch panel .................................7-2
Environmental specifications .........................................7-10
Error messages ................................................................6-4
F
Fax kit ..............................................................................4-8
Front cover .......................................................................1-4
G
I
Green knob ......................................................................1-3
Grid cleaner .....................................................................5-8
Grounding the machine ....................................................... v
Installation precautions ...................................................... iv
Interrupt copy .................................................................3-16
J
Job separator ...................................................................4-6
Paper jams ..............................................................6-19
Specifications ..........................................................7-10
K
Key counter ......................................................................4-7
How to insert .............................................................4-7
L
Language .......................................................................2-18
Left cover 1 ......................................................................1-2
Paper jams ..............................................................6-12
Left cover 1 lever .............................................................1-2
Left cover 2 ......................................................................1-2
Paper jams ..............................................................6-12
Legal information and conventions
About this Operation Guide ......................................xvii
Automatic 2-sided copy function ................................. xi
Conventions in this guide ..........................................xvii
Energy saving control function .................................... xi
Index-1
Energy Star program ................................................... xi
Legal information ......................................................... x
Originals and paper sizes ........................................xviii
Recycled paper ........................................................... xi
Regarding tradenames ................................................ x
Low-Power mode ...................................................... xi, 3-17
M
Main charger ....................................................................1-3
Cleaning ....................................................................5-5
Main power switch ............................................................1-4
Maintenance .....................................................................5-1
MP tray .............................................................................1-4
Loading paper ...........................................................2-4
Paper jams ..............................................................6-12
Specifying the media type .......................................2-13
Specifying the paper size ..........................................2-9
N
Names
Body ..........................................................................1-2
Operation panel ........................................................1-5
Touch panel ...............................................................1-6
O
Operation panel ........................................................ 1-2, 1-5
Option
Built-in finisher ..........................................................4-3
Document finisher .....................................................4-6
Document processor .................................................4-3
Fax kit .......................................................................4-8
Job separator ............................................................4-6
Key counter ...............................................................4-7
Overview of optional equipment ................................4-2
Paper feeder .............................................................4-3
Printer kit ...................................................................4-7
Original
Loading in the document processor ........................2-15
Loading on the platen .............................................2-14
Size ..........................................................................xviii
Original cover ...................................................................1-2
Cleaning ....................................................................5-2
Original placement indicator ...........................................2-15
Original size indicator plates ............................................1-2
Output stopper .................................................................1-4
Output tray .......................................................................3-3
P
Paper ................................................................................7-5
Loading paper in the MP tray ....................................2-4
Loading paper into cassette 1, 2 ...............................2-2
Loading paper into paper feeder ...............................2-2
Note ..........................................................................2-2
Size ..........................................................................xviii
Specifying the media type ............................... 2-8, 2-13
Specifying the paper size .................................. 2-7, 2-9
Paper feeder ....................................................................4-3
Index-2
Loading paper .......................................................... 2-2
Paper jams ............................................................. 6-11
Specifications ........................................................... 7-8
Specifying the media type ........................................ 2-8
Specifying the paper size ......................................... 2-7
Paper feed unit ................................................................ 1-3
Paper jams ............................................................. 6-14
Paper feed unit cover ...................................................... 1-3
Paper jams ...................................................................... 6-8
Built-in finisher ........................................................ 6-16
Cassette 1 ....................................................... 6-9, 6-13
Cassette 2 .............................................................. 6-10
Cassette 3 and 4 .................................................... 6-11
Document finisher .................................................. 6-19
Document processor .............................................. 6-18
Duplex unit ............................................................. 6-13
Jam location indicators ............................................. 6-8
Job separator ......................................................... 6-19
Left covers 1, 2 and 3 ............................................. 6-12
MP tray ................................................................... 6-12
Paper feeder .......................................................... 6-11
Paper feed unit ....................................................... 6-14
Paper jam precautions ............................................. 6-9
Paper length guide .......................................................... 1-4
Paper width adjusting tab ................................................ 1-4
Paper width guide ............................................................ 1-4
Platen .............................................................................. 1-2
Cleaning ................................................................... 5-2
Loading originals .................................................... 2-14
Power supply .......................................................................v
Precautions for use ............................................................ vi
Preparation ...................................................................... 2-1
Printer kit ......................................................................... 4-7
S
Safety conventions ...............................................................i
Selecting image quality ................................................... 3-4
Separator
Cleaning ................................................................... 5-3
Sleep mode ...............................................................xi, 3-17
Slit glass
Cleaning ................................................................... 5-2
Solving malfunctions ....................................................... 6-2
Specifications
Body ......................................................................... 7-6
Built-in finisher .......................................................... 7-9
Document finisher .................................................... 7-9
Document processor ................................................ 7-8
Environmental specifications .................................. 7-10
Job separator ......................................................... 7-10
Paper feeder ............................................................ 7-8
Split mode ...................................................................... 3-13
Symbols ................................................................................i
T
Toner container ................................................................ 1-3
Replacement ............................................................ 5-7
Toner container stopper ................................................... 1-3
Top tray ............................................................................ 1-4
Touch panel ..................................................................... 1-6
Transfer roller
Cleaning ...................................................................5-4
W
Warm-up ..........................................................................3-2
Waste toner box ...............................................................1-3
Replacement ............................................................5-7
Z
Zoom
Auto zoom ................................................................3-6
Manual zoom .....................................................3-6, 3-7
Preset zoom ......................................................3-6, 3-7
XY zoom ............................................................3-6, 3-8
Index-3
Index-4
We recommend the use of our own brand supplies.
We will not be liable for any damage caused by the use of third party supplies in this machine.
A1
©2007 is a trademark of Kyocera Corporation
2007.8
302JB56031
Advertisement