Mercury HPQF5361 Crystal Oscillator Owner manual

Mercury HPQF5361 Crystal Oscillator Owner manual
Crystal Oscillators
[ Quick - turn Clock Oscillators , 10 ~ 1450 MHz ]
HTQF
HPQF
HDQF
CMOS waveform
LVPECL Differential
LVDS Differential
Min.
2.5 V 3.3 V
Max.
10 MHz
1.45 GHz
1.0 pS Phase Jitter ( typical )
Features
The HTQF, HPQF and HDQF Series are members of Mercury’s Q-Family Quick-Turn crystal oscillators
that can be delivered within days. With low current consumption ( 54 mA for LVPECL 622.080 MHz at 3.3V )
and an integrated phase jitter performance of 1.0 pS RMS, they have gained its precision frequency control
market position by providing engineers with next-day samples for prototypes and low cost, fast delivery
forvolume production. The perfect solution to replace traditional XO’s & VCXO’s that use a more expensive,
highfrequency, fundamental crystal and a noisy PLL multiplier circuit
General specifications , at Ta=+25°C , CL=15pF
HTQF
HPQF
LVCMOS / LVTTL
LVPECL
LVDS
+ 2.5 VDD ± 5% ( voltage code " 25 " )
+ 3.3 VDD ± 5% ( voltage code " 33 " )
10 ~ 245 MHz
15 pF
90 % VDD
10 % VDD
16 mA typical
10 MHz : 17 mA ; 150 MHz : 28 mA
50 MHz : 20 mA ; 200 MHz : 33 mA
100 MHz : 24 mA ; 250 MHz : 37 mA
+ 2.5 VDD ± 5% ( voltage code " 25 " )
+ 3.3 VDD ± 5% ( voltage code " 33 " )
10 ~ 1.45 GHz
50 Ω into Vcc - 2V or Thevenin equiralent
VDD - 1.03 ( min.) , VDD - 0.6 ( max.)
VDD - 1.85 ( min.) , VDD - 1.6 ( max.)
16 mA typical
100 MHz : 48 mA ; 750 MHz : 59 mA
250 MHz : 50 mA ;
1 GHz : 62 mA
500 MHz : 55 mA ; 1.35 GHz : 68 mA
+ 2.5 VDD ± 5% ( voltage code " 25 " )
+ 3.3 VDD ± 5% ( voltage code " 33 " )
10 ~ 1.45 GHz
100 Ω
1.4 V Typical , 1.6 V max.
1.1 V Typical , 0.9 V min.
16 mA typical
100 MHz : 18 mA ; 750 MHz : 24 mA
250 MHz : 20 mA ;
1 GHz : 26 mA
500 MHz : 22 mA ; 1.35 GHz : 28 mA
1.5 nS. ( Typical ) , 3.0 nS. ( max. )
0.2 nS. ( Typical ) , 0.5 nS. ( max. )
0.2 nS. ( Typical ) , 0.4 nS. ( max. )
Model
Output Logic
Supply Voltage VDD ( code )
Available Frequency Range
Load
Output Logic " High " , " 1 "
Output Logic " Low " , " 0 "
Current with Output Disable
Current Consumption ( VDD = + 3.3V )
All values are typical and over the
operating temperatures.
Rise Time / Fall Time
Duty Cycle
Start-up Time
Aging at Ta = +25°C
Storage Temperature
Frequency Stability Codes
Tr / Tf : 10% ↔ 90% waveform
Tr / Tf : 20% ↔ 80% waveform
Tr / Tf : 20% ↔ 80% waveform
50 % ± 5%
10 m sec. ( max.)
± 2 ppm max. first year at 25°C ; ± 10 ppm max. over 10 years
-55°C to + 150°C
Frequency Stability
If non-standard , please enter the desired
± 25 ppm
± 50 ppm
± 100 ppm
over Operating Temperature Range
stability after the " C " or " I " represents .
Commercial ( -10°C to +70°C )
A
Industrial ( -40°C to +85°C )
SSB Phase Noise
[ dBc / Hz ( typical ) ]
HDQF
Offset
10 Hz
100 Hz
1 KHz
10 KHz
100 KHz
1 MHz
10 MHz
Phase Jitter ( 12KHz ~ 20 MHz, RMS) unit : pS.
77.76
-57
-94
-114
-123
-124
-144
-152
0.9
122.88
-68
-99
-113
-119
-120
-140
-148
0.8
B
C
D
E
F
125
-63
-94
-113
-118
-119
-137
-146
1.1
156.25
-55
-85
-109
-116
-118
-139
-146
0.9
212.5
-62
-93
-105
-113
-115
-135
-143
1.0
For example :
" C20 " ± 20 ppm over -10°C to +70°C ;
" I30 " ± 30 ppm over -40°C to +85°C
491.52
-61
-86
-100
-105
-105
-126
-137
1.1
622.08
-48
-85
-101
-102
-103
-124
-133
1.2
1000
-52
-82
-93
-97
-97
-116
-127
1.5
1250
-42
-81
-93
-96
-97
-119
-129
1.1
Output Enable Function
70% of VDD (min.) to enable output. (Open connection prohibit.)
30% of VDD (max.) to disable output (high impedance).
OE Control on Pad 1
Output Enable Time / Disable Time
Integrated Phase Jitter
200 nS. Max. / 50 nS. Max.
1.0 pS typical ( 12 KHz to 20 MHz )
;
< 100 fS ( 1.875 KHz to 20 MHz )
Outline Dimensions ( Unit : mm ) , Suggested pad Layout for SMDs
H_QF326
H_QF536
H_QF576
Pad Connections
Pad 1 : OE - High Enable ; Pad 2 : No connection ; Pad 3 : Ground ; Pad 4 : [ CMOS : Output , LVPECL or LVDS : Differential ] ;
Pad 5 : [ CMOS : NC , LVPECL or LVDS : Complementary ] ; Pad 6 : Supply Voltage
Mercury
www .mercury-crystal.com
87
■Taiwan : Tel (886)-2-2406-2779 / sales-tw@mercury-crystal.com ■U.S.A: Tel: (1)-909-466-0427 / sales-us@mercury-crystal.com ■China: Tel: (86)-512-5763-8100 / sales-cn@mecxtal.com
Crystal Oscillators
[ Quick - turn Clock Oscillators , 10 ~ 1450 MHz ]
HTQ _
HPQ _
HDQ _
CMOS waveform
LVPECL Differential
LVDS Differential
-
E
SMD
2.5 V
3.3 V
Part Number Format and Example
Example : 25HPQN576 - E - 622.080
25
Supply Voltage
“ 3 ” for 3.3V
“ 25 ” for 2.5V
H_QN
HTQF , HTQN : CMOS
576
Package Size
Frequency Stability Code “ E ”:
HPQF , HPQN : LVPECL
“ 576 ”: 7 x 5 mm
±50 ppm over -40 to +85°C.
HDQF , HDQN : LVDS
“ 536 ”: 5 x 3.2 mm
-
622.08
Frequency (MHz)
Other frequency stabilities are available.
Test Circuits and Output Waveforms
CMOS
LVPECL
Mercury
www .mercury-crystal.com
LVDS
88
■Taiwan : Tel (886)-2-2406-2779 / sales-tw@mercury-crystal.com ■U.S.A: Tel: (1)-909-466-0427 / sales-us@mercury-crystal.com ■China: Tel: (86)-512-5763-8100 / sales-cn@mecxtal.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement