Allnet ALL8844WMP Owner Manual

Allnet ALL8844WMP Owner Manual
Example Scenario:
VLAN1: 1~26 ports
VLAN2: 9~12 poets
VLAN3: 13~16 ports
1.Please select VLAN setting → VLAN mode → Change VLAN mode → Tag based VLAN
2.Please select VLAN setting → VLAN member setting ->add VID 1 members as below
add VID 2 members as below
add VID 3 members as below
ok , now VLAN1 members can access members of VLAN2 or VLAN3 ;but VLAN2 members can not
access VLAN3 members each other.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement