Toro Replacement Switch Kit, Mid-Size Mowers Attachment Installation Instruction

Toro Replacement Switch Kit, Mid-Size Mowers Attachment Installation Instruction
Form No. 3378-512 Rev A
Replacement Switch Kit
Mid-Size Mowers
Model No. 121-8032
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Use
Qty.
1
1
Switch
Harness
Install the switch.
Installing the Switch
1
1. Disconnect the wire leads from the existing switch.
2. Remove the existing switch.
3. Insert the new switch (Figure 1).
4. Install the wire leads from the main harness to the new
harness connections (Figure 1).
2
5. Plug the new harness into the switch (Figure 1).
3
4
g022347
Figure 1
1. New switch
2. Harness
© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
3. Harness connections
4. Wire leads from the main
harness
Original Instructions (EN)
Printed in the USA.
All Rights Reserved *3378-512* A
Notes:
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement