CHAUVET DJ COLORband PiX User Manual

CHAUVET DJ COLORband PiX User Manual
User Manual
TABLE OF CONTENTS
1. Before You Begin .............................................................................. 3
What Is Included ............................................................................................... 3
Unpacking Instructions ...................................................................................... 3
Claims ........................................................................................................................ 3
Text Conventions .............................................................................................. 3
Icons .................................................................................................................. 3
Document Information ....................................................................................... 3
Product at a Glance .......................................................................................... 4
Safety Notes ...................................................................................................... 4
2. Introduction ....................................................................................... 5
Overview ........................................................................................................... 5
Dimensions ....................................................................................................... 5
3. Setup .................................................................................................. 6
AC Power .......................................................................................................... 6
Fuse Replacement ..................................................................................................... 6
Power Linking............................................................................................................. 7
Mounting ........................................................................................................... 8
Orientation ................................................................................................................. 8
Rigging ....................................................................................................................... 8
CBB-6 Instructions ..................................................................................................... 9
4. Operation ..........................................................................................10
Control Panel Operation.................................................................................. 10
Menu Map ....................................................................................................... 10
Configuration (DMX) ....................................................................................... 11
DMX Personalities and Starting Address ................................................................ 11
Zone Control ............................................................................................................ 11
DMX Channel Assignments and Values ......................................................... 12
7-CH......................................................................................................................... 12
3-CH......................................................................................................................... 12
4-CH......................................................................................................................... 12
6-CH......................................................................................................................... 13
9-CH......................................................................................................................... 13
12-CH....................................................................................................................... 14
18-CH....................................................................................................................... 14
36-CH....................................................................................................................... 15
Configuration (Standalone) ............................................................................. 16
Static Color Mode..................................................................................................... 16
Automatic Mode ....................................................................................................... 16
Custom Static Color Mode ....................................................................................... 16
Master/Slave Mode .................................................................................................. 17
5. Technical Information ......................................................................18
Product Maintenance ...................................................................................... 18
Returns ..................................................................................................19
Contact Us ............................................................................................20
6. Technical Specifications ..................................................................21
Page 2 of 21
COLORband™ PiX User Manual Rev. 6
1. BEFORE YOU BEGIN
What Is
Included
Unpacking
Instructions
Claims
Text
Conventions
Icons
•
•
•
•
•
COLORband™ PiX
Power Cord
2 L-Brackets
Warranty Card
Quick Reference Guide
Immediately upon receipt, carefully unpack the product and check the box to make sure
you have received all the parts indicated above in good condition.
If the box or contents (the product and included accessories) appear damaged from
shipping, or show signs of mishandling, upon receipt notify the carrier immediately, not
CHAUVET®. Failure to do so in a timely manner may invalidate your claim with the
carrier. In addition, keep the container and all the packing material for inspection.
For other issues such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET® within 7 days of receiving the
merchandise.
Convention
1–512
50/60
Settings
Menu > Settings
<ENTER>
ON
Icon
Meaning
A range of values
A set of values of which only one can be chosen
A menu option not to be modified
A sequence of menu options to be followed
A key to be pressed on the product’s control panel
A value to be entered or selected
Meaning
Critical installation, configuration, or operation information. Failure
to comply may cause the product to not work, damage it, or cause
harm to the user.
Important installation or configuration information. Failure to
comply with this information could make the product not work
correctly.
Useful information.
Document
Information
The information and specifications contained in this document are subject to change
without notice. CHAUVET® assumes no responsibility or liability for any errors or
omissions that may appear in this manual. CHAUVET® reserves the right to update the
existing document or to create a new document to correct any errors or omissions.
You can download the latest version of this document from www.chauvetlighting.com.
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Author
Date
Editor
Date
A. Leon
04/04/14
L. Henry
04/14/14
COLORband™ PiX User Manual Rev. 6
Page 3 of 21
Product at a
Glance
Use on Dimmer
Outdoor Use
Sound-Activated
DMX
Master/Slave
Safety Notes
x
x
P
P
P
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User-Serviceable
P
P
P
x
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Always connect the product to a grounded circuit to avoid the risk of electrocution.
Always disconnect the product from power before cleaning it or replacing the fuse.
Avoid direct eye exposure to the light source while the product is on.
Make sure the power cord is not crimped or damaged.
Never disconnect the product from power by pulling or tugging on the power cord.
If mounting the product overhead, always secure to a fastening device using a
safety cable.
Make sure there are no flammable materials close to the product during operation.
Do not touch the product’s housing when operating because it may be very hot.
Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
Always install the product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
Be sure that no ventilation slots on the product’s housing are blocked.
Never connect the product to a dimmer or rheostat.
Make sure to replace the fuse with another of the same type and rating.
Never carry the product from the power cord or any moving part. Always use the
hanging/mounting brackets.
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
In the event of a serious operating problem, stop using the product immediately.
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
Keep this User Manual for future consultation. If you sell the product to another user, be
sure that they also receive this document.
Page 4 of 21
COLORband™ PiX User Manual Rev. 6
2. INTRODUCTION
Overview
U-Bracket (x2)
Power Out
Bracket Adjustment Knob
Fuser Holder
Power In
Microphone
3-pin DMX Connectors
5-pin DMX Connectors
Sound Sensitivity Knob
Display and
Control
Buttons
Dimensions
COLORband™ PiX User Manual Rev. 6
Page 5 of 21
3. SETUP
AC Power
The COLORband™ PiX has an auto-ranging power supply and can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0% to 100% switch.
Fuse
Replacement
Follow the instructions below to change the fuse, if necessary.
Disconnect the product from the power outlet before replacing the fuse.
1.
2.
3.
4.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
Pry the fuse holder out of the housing.
Remove the blown fuse from the holder and replace with a fuse of the exact same
type and rating.
Insert the fuse holder back in place and reconnect power.
Installed fuse
(held by plastic clip)
Safety cap
Spare fuse holder
(inside safety cap)
The product does not ship with a spare fuse; however, the safety cap has room
for a spare.
Page 6 of 21
COLORband™ PiX User Manual Rev. 6
Power Linking
The product provides power linking via the IEC outlet located in the back of the unit. See
the diagram below.
Power Linking
Diagram
st
1 Product
nd
2 Product
rd
3 Product
Other products
You can power link up to 11 COLORband™ PiX units on 120 VAC or up to
20 COLORband™ PiX units on 230 VAC.
The power-linking diagram shown above corresponds to the North American
version of the product ONLY! If using the product in other markets, you must
consult with the local CHAUVET® distributor as power linking connectors and
requirements may differ in your country or region.
COLORband™ PiX User Manual Rev. 6
Page 7 of 21
Mounting
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
Orientation
The COLORband™ PiX may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
Mounting Diagram
•
Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and programming.
•
Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight. See the Technical Specifications section of this
manual for weight information.
•
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight
capacity.
•
When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs by hand.
Using tools could damage the knobs.
•
The mounting brackets also serve as floor supports/allow for surface mounting.
When mounting the product on the floor, make sure that the product and cables are
away from people and vehicles.
•
The CBB-6 bracket (sold separately) is fully compatible with the COLORband™ PiX
and COLORband™ PiX Mini.
Mounting Bracket
Bracket
Adjustment Knob
U-Bracket (x2)
L-Bracket (x2)
Page 8 of 21
COLORband™ PiX User Manual Rev. 6
CBB-6 Instructions
The CBB-6 works with the COLORband™ PiX Mini (shown below), COLORband™ PiX, and most linear/strip lights.
Basic Assembly
To assemble the CBB-6 bracket:
1. Unscrew the bracket adjustment knob on the light you wish to attach to the bracket.
2. Align the light to any of the small mounting holes on the CBB-6 (maximum 6 lights).
3. Reattach the bracket adjustment knob to the light.
4. Repeat up to a total of six times with a pair of CBB-6 brackets.
The final assembly should appear similar to this:
Advanced Assembly Options
The CBB-6 is fully stackable. Use the included screws to attach another CBB-6 to the top
of the bracket for additional rows of lights.
Do NOT connect more than two CBB-6 brackets vertically (for a maximum of 12 strip
lights).
Before mounting the CBB-6 onto any structure, ensure that the structure onto which
you are mounting the product on can support the total weight.
When rigging the product onto truss, you should use a mounting clamp with the
appropriate weight capacity. The CBB-6 bracket has multiple 13 mm holes which are
appropriate for this purpose.
CHAUVET® recommends the CLP-15 heavy-duty clamp (sold separately).
COLORband™ PiX User Manual Rev. 6
Page 9 of 21
4. OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display.
Button
<MENU>
<UP>
Menu Map
Function
Press to find an operation mode or to back out of the current menu
option
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Mode
Static Colors
Auto Programs
Program Speed
Programming Steps
C--
P--
S--
Slave Mode
Custom Color
Mixing
C1
Red
C2
Green
C3
Blue
C4
Cyan
C5
Magenta
C6
Yellow
C7
White
P1
7-Color Switching
P2
7-Color Fading
P3
3-Color Switching
P4
3-Color Fading
P5
Chase Program
P6
7-Color Sound-Active
P7
7-Color Sound-Active Chase + Strobe
S001-S100
SLA
U--
Description
Selects auto program speed
Sets Slave mode
r--
Red
g--
Green
b--
Blue
3-CH
4-CH
6-CH
DMX
Personalities
7-CH
9-CH
d001-d512
Selects DMX starting address
12-CH
18-CH
36-CH
Page 10 of 21
COLORband™ PiX User Manual Rev. 6
Configuration
(DMX)
DMX
Personalities
and Starting
Address
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
The COLORband™ PiX has 8 DMX personalities, from a 3-channel mode for basic
control to a 36-channel mode with more advanced control.
The COLORband™ PiX uses up to 36 DMX channels in its 36-channel DMX mode, which
defines the highest configurable address to 477.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If the starting address is too high, access to some of the
product’s channels will be restricted.
If you are not familiar with DMX, download the “DMX Primer” from
www.chauvetlighting.com.
To select the DMX personality, do the following:
1. Press <MENU> repeatedly until 3-CH, 4-CH, 6-CH, 7-CH, 9-CH, 12CH, 18CH, or
36CH shows on the display.
2. Press <ENTER> to choose your DMX personality when it appears on the display.
To then choose your starting address:
1. The display should show d 1 once you’ve selected your DMX personality using the
steps above.
2. Use <UP> or <DOWN> to select the starting address.
3. Press <ENTER>.
Zone Control
The COLORband™ PiX offers zone control of the lights, and you can select from 2
through 12 zones to control. To access this feature, choose the DMX personality as
shown above.
Note: Not all DMX personalities offer zone control.
COLORband™ PiX User Manual Rev. 6
Page 11 of 21
DMX Channel Assignments and Values
7-CH
Channel
Function
000 ó 255 0–100%
2
Green
000 ó 255 0–100%
3
Blue
4
Color Macros
000 ó 255 0–100%
000 ó 015 No function
016 ó 255 Color Macros
Speed (slow to fast)
000 ó 255
(when CH.6 is from 032–233)
000 ó 015 No function
016 ó 255 0–30 Hz
000 ó 031 No function
032 ó 063 Pulse effect 0–100%
064 ó 095 Pulse effect 100%–0
096 ó 114 Pulse effect 100%–0–100%
115 ó 127 Chase program
128 ó 159 Auto fade transition
160 ó 191 Auto snap transition (3 colors)
192 ó 223 Auto snap transition (7 colors)
224 ó 255 Sound-Active mode
000 ó 255 0–100%
Speed
4-CH
Page 12 of 21
Setting
Red
5
3-CH
Value
1
Strobe
(CH.1-CH.4 only)
6
Auto Programs
7
Dimmer
Channel
Function
Value
Setting
1
Red
000 ó 255 0–100%
2
Green
000 ó 255 0–100%
3
Blue
000 ó 255 0–100%
Channel
Function
Value
Setting
1
Red
000 ó 255 0–100%
2
Green
000 ó 255 0–100%
3
4
Blue
Dimmer
000 ó 255 0–100%
000 ó 255 0–100%
COLORband™ PiX User Manual Rev. 6
6-CH
9-CH
Channel
Function
Value
Setting
1
Red
000 ó 255 0–100%
2
Green
000 ó 255 0–100%
3
Blue
000 ó 255 0–100%
4
5
6
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
Channel
Function
Value
Setting
Zone
1
2
Zone
1
2
Red
Green
000 ó 255 0–100%
000 ó 255 0–100%
3
Blue
000 ó 255 0–100%
4
5
6
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
2
7
8
9
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
3
COLORband™ PiX User Manual Rev. 6
1
Page 13 of 21
12-CH
18-CH
Page 14 of 21
Channel
Function
Value
Setting
Zone
1
Red
000 ó 255 0–100%
2
3
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
4
5
6
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
2
7
8
9
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
3
10
11
12
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
4
Channel
Function
Value
Setting
1
Zone
1
Red
000 ó 255 0–100%
2
Green
000 ó 255 0–100%
3
Blue
000 ó 255 0–100%
4
5
6
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
2
7
8
9
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
3
10
11
12
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
4
13
14
15
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
5
16
17
18
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
6
1
COLORband™ PiX User Manual Rev. 6
36-CH
Channel
Function
Value
Setting
Zone
1
2
Red
Green
000 ó 255 0–100%
000 ó 255 0–100%
3
Blue
000 ó 255 0–100%
4
5
6
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
2
7
8
9
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
3
10
11
12
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
4
13
14
15
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
5
16
17
18
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
6
19
20
21
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
7
22
23
24
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
8
25
26
27
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
9
28
29
30
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
10
31
32
33
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
11
34
35
36
Red
Green
Blue
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
12
COLORband™ PiX User Manual Rev. 6
1
Page 15 of 21
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
•
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode (either Static,
Auto, or Sound-Active) to a DMX string connected to a DMX controller. Products
in standalone mode may transmit DMX signals that could interfere with the DMX
signals from the controller.
Static Color Mode
Automatic Mode
To enable the Static Color mode, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose a color (C1-C7).
4. Press <ENTER>.
To enable the Automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose your auto program (P1–P7).
4. Press <ENTER>.
You can adjust the speed of the automatic program as well.
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to adjust the duration of each step of the automatic program
from S001 (slow) to S100 (fast).
4. Press <ENTER>.
When using the sound-active auto programs, the product will respond
only to low frequencies of music (bass and drums). Adjust the sound
sensitivity knob to increase the sound sensitivity until the product
responds to sound as desired.
Custom Static
Color Mode
To enable the Custom Static Color Mode, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER>.
3. Press <UP> or <DOWN> to choose between colors (r--, g--, b--).
4. Press <ENTER>.
5. Press <UP> or <DOWN> to choose the intensity of the color (000–100).
6.
7.
Page 16 of 21
Repeat the steps to mix additional colors to create the color you need.
Press <ENTER>.
COLORband™ PiX User Manual Rev. 6
Master/Slave
Mode
The Master/Slave mode allows a single COLORband™ PiX unit (the master) to control
the actions of one or more COLORband™ PiX units (the slaves) without the need of a
DMX controller. The master unit will be set to operate in either Automatic or Sound
Active mode, while the slave units will be set to operate in Slave mode. Once set and
connected, the slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press <MENU> repeatedly until SLA shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to 001.
4.
5.
Connect the DMX input of the first slave unit to the DMX output of the master unit.
Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
6. Finish setting and connecting all the slave units.
Master unit:
1.
2.
Set the master unit to operate in either Automatic or Sound-Active mode.
Make the master unit the first unit in the DMX daisy chain.
Advanced Master/Slave options for using the COLORband™ PiX as master unit
with the COLORband™ PiX Mini:
When a COLORband™ PiX is the master unit and COLORband™ PiX Minis are slave
units, the submenu A1–A126 (found under SLA in the master unit) will select how many
slave units are attached to it. Selecting A A1 or A A2 on the COLORband™ PiX Minis
will tell the master unit which side of the strip the Minis are on. The combination of
number and direction settings allows lots of variation, including allowing 2
COLORband™ PiX Minis to appear as one single strip the same size as the master
COLORband™ PiX for uninterrupted chases.
Advanced Master/Slave options for using the COLORband™ PiX Mini as master
unit with the COLORband™ PiX:
When a COLORband™ PiX Mini is the master unit and COLORband™ PiX serves as a
slave, selecting A A1 or A A2 on the COLORband™ PiX Minis will command the
COLORband™ PiX to either light LED-for-LED with the Mini (meaning half of the
COLORband™ PiX), or to light up entirely at the same speed.
•
Configure all the slave units before connecting the master unit to the DMX
daisy chain.
•
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller may interfere with the signals from the
master unit.
•
Do not connect more than 31 slave units to the master unit.
COLORband™ PiX User Manual Rev. 6
Page 17 of 21
5. TECHNICAL INFORMATION
Product
Maintenance
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life. To maintain optimum performance and
minimize wear, clean lighting products at least twice a month. However, be aware that
usage and environmental conditions are contributing factors to increasing the cleaning
frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Page 18 of 21
COLORband™ PiX User Manual Rev. 6
RETURNS
To return a product or request support:
•
In the U.S., contact CHAUVET® World Headquarters (see Contact Us).
•
In the UK or Ireland, contact CHAUVET® Europe Ltd. (see Contact Us).
•
In Mexico, contact CHAUVET® Mexico (see Contact Us).
•
In any other country, DO NOT contact CHAUVET®. Contact your distributor. See
www.chauvetlighting.com for distributors outside the U.S., United Kingdom, Ireland, or Mexico.
If you live outside the U.S., United Kingdom, Ireland, or Mexico, contact your
distributor of record and follow their instructions on how to return
CHAUVET® products to them. Visit our website for contact details.
Call the corresponding CHAUVET® Technical Support office and request a Return Merchandise
Authorization (RMA) number before shipping the product. Be prepared to provide the model number,
serial number, and a brief description of the cause for the return.
You must send the merchandise prepaid, in its original box, and with its original packing and
accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET® will refuse any product returned without
an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA
number directly on the box.
Before sending the product, clearly write the following information on a piece of paper and place it
inside the box:
•
Your name
•
Your address
•
Your phone number
•
RMA number
•
A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be
your responsibility. FedEx packing or double-boxing is recommended.
CHAUVET® reserves the right to use its own discretion to repair or replace
returned product(s).
COLORband™ PiX User Manual Rev. 6
Page 19 of 21
CONTACT
US
WORLD HEADQUARTERS - CHAUVET®
General Information
Technical Support
Address:5200 NW 108th Avenue
Voice: (954) 577-4455 (Press 4)
Sunrise, FL 33351
Fax:
(954) 756-8015
Voice: (954) 577-4455
Email: [email protected]
Fax:
(954) 929-5560
World Wide Web
Toll free: (800) 762-1084
www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - CHAUVET® Europe Ltd.
General Information
Technical Support
Address:Unit 1C
Email:
Brookhill Road Industrial
[email protected]
Estate
World Wide Web
Pinxton, Nottingham, UK
www.chauvetlighting.co.uk
NG16 6NT
Voice: +44 (0)1773 511115
Fax:
+44 (0)1773 511110
MEXICO - CHAUVET® Mexico
General Information
Technical Support
Address:Av. Santa Ana 30
Email: [email protected]
Parque Industrial Lerma
Lerma, Mexico C.P. 52000 World Wide Web
Voice: +52 (728) 285-5000
www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, or Mexico, contact your dealer. Follow their instructions to
request support or to return a product. Visit our website for contact details.
Page 20 of 21
COLORband™ PiX User Manual Rev. 6
6. TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Length
Width
Height
Weight
41.6 in (1,057 mm)
2.5 in (64 mm)
6.1 in (154 mm)
8.9 lb (4 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100–240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
82 W
86 W
Operating
0.7 A
0.4 A
Power linking current (units)
8 A (11 units)
8 A (20 units)
Fuse
F 2 A, 250 V
F 2 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (U.S.)
Local plug
Type
Power
Lifespan
LED
3W
50,000 hours
Color
Quantity
Current
Tri-color
12
1,050 mA
Light Source
Parameter
Photo Optic
Thermal
DMX
Ordering
Strobe Rate
0 to 30 Hz
Illuminance @ 2 m
2,325 lux
Beam angle
20°
Field angle
34°
Maximum External Temp.
Cooling System
104 °F (40 °C)
Convection
I/O Connectors
Connector Type
Channel Range
3-pin and 5-pin XLR
Sockets
3, 4, 6, 7, 9, 12, 18 or 36
Product Name
Item Code
Item Number
COLORband™ PiX
03020469
COLORBANDPIX
COLORband™ PiX User Manual Rev. 6
Page 21 of 21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement