ZANUSSI ZQA14030DV User Manual

advertisement

ZANUSSI ZQA14030DV User Manual
User Manual
GETTING
STARTED?
EASY.
ZQA14030DV
EN User Manual
Refrigerator
VISIT OUR WEBSITE FOR:
Get usage advice, brochures, trouble shooter, service and repair information:
www.zanussi.com/support
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damage that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible
location for future reference.
CHILDREN AND VULNERABLE PEOPLE SAFETY
•
•
•
•
•
•
•
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Children aged from 3 to 8 years are allowed to load and unload
the appliance provided that they have been properly instructed.
This appliance may be used by persons with very extensive and
complex disabilities provided that they have been properly
instructed.
Children of less than 3 years of age should be kept away from
the appliance unless continuously supervised.
Do not let children play with the appliance.
Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
Keep all packaging away from children and dispose of it
appropriately.
GENERAL SAFETY
•
2
This appliance is intended to be used in household and similar
applications such as:
– Farm houses; staff kitchen areas in shops, offices and other
working environments;
By clients in hotels, motels, bed and breakfast and other
residential type environments.
To avoid contamination of food respect the following
instructions:
– do not open the door for long periods;
– clean regularly surfaces that can come in contact with food
and accessible drainage systems;
– store raw meat and fish in suitable containers in the
refrigerator, so that it is not in contact with or drip onto other
food.
WARNING: Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of the
type recommended by the manufacturer.
Do not use water spray and steam to clean the appliance.
Clean the appliance with a moist soft cloth. Only use neutral
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
When the appliance is empty for long period, switch it off,
defrost, clean, dry and leave the door open to prevent mould
from developing within the appliance.
Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
–
•
•
•
•
•
•
•
•
•
•
SAFETY INSTRUCTIONS
INSTALLATION
WARNING! Only a qualified person
must install this appliance.
•
Remove all the packaging.
•
•
•
Do not install or use a damaged appliance.
Do not use the appliance before installing it in
the built-in structure due to safety manner.
Follow the installation instructions supplied with
the appliance.
3
•
•
•
•
•
•
•
•
•
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Make sure the air can circulate around the
appliance.
At first installation or after reversing the door
wait at least 4 hours before connecting the
appliance to the power supply. This is to allow
the oil to flow back in the compressor.
Before carrying out any operations on the
appliance (e.g. reversing the door), remove the
plug from the power socket.
Do not install the appliance close to radiators or
cookers, ovens or hobs.
Do not expose the appliance to the rain.
Do not install the appliance where there is direct
sunlight.
Do not install this appliance in areas that are too
humid or too cold.
When you move the appliance, lift it by the front
edge to avoid scratching the floor.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electric
shock.
WARNING! When positioning the
appliance, ensure the supply cord is
not trapped or damaged.
USE
WARNING! Risk of injury, burns,
electric shock or fire.
The appliance contains flammable gas,
isobutane (R600a), a natural gas with a high level
of environmental compatibility. Be careful not to
cause damage to the refrigerant circuit containing
isobutane.
• Do not change the specification of this
appliance.
• Do not put electrical appliances (e.g. ice cream
makers) in the appliance unless they are stated
applicable by the manufacturer.
• If damage occurs to the refrigerant circuit, make
sure that there are no flames and sources of
ignition in the room. Ventilate the room.
• Do not let hot items to touch the plastic parts of
the appliance.
• Do not store flammable gas and liquid in the
appliance.
• Do not put flammable products or items that are
wet with flammable products in, near or on the
appliance.
• Do not touch the compressor or the condenser.
They are hot.
INTERNAL LIGHTING
WARNING! Do not use multi-plug
adapters and extension cables.
•
•
•
•
•
•
•
The appliance must be earthed.
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
Always use a correctly installed shockproof
socket.
Make sure not to cause damage to the electrical
components (e.g. mains plug, mains cable,
compressor). Contact the Authorised Service
Centre or an electrician to change the electrical
components.
The mains cable must stay below the level of the
mains plug.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
installation.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
WARNING! Risk of electric shock.
•
The type of lamp used for this appliance is for
household appliances only. Do not use it for
house lighting.
CARE AND CLEANING
WARNING! Risk of injury or damage
to the appliance.
•
•
•
Before maintenance, deactivate the appliance
and disconnect the mains plug from the mains
socket.
This appliance contains hydrocarbons in the
cooling unit. Only a qualified person must do the
maintenance and the recharging of the unit.
Regularly examine the drain of the appliance and
if necessary, clean it. If the drain is blocked,
defrosted water collects in the bottom of the
appliance.
SERVICE
• To repair the appliance contact the Authorised
Service Centre. Use original spare parts only.
4
•
Please note that self-repair or non-professional
repair can have safety consequences and might
void the guarantee.
DISPOSAL
WARNING! Risk of injury or
suffocation.
•
Disconnect the appliance from the mains
supply.
•
•
•
•
•
Cut off the mains cable and discard it.
Remove the door to prevent children and pets
to be closed inside of the appliance.
The refrigerant circuit and the insulation
materials of this appliance are ozone-friendly.
The insulation foam contains flammable gas.
Contact your municipal authority for information
on how to discard the appliance correctly.
Do not cause damage to the part of the cooling
unit that is near the heat exchanger.
INSTALLATION
WARNING! Refer to Safety chapters.
WARNING! Refer to installation
instruction document to install your
appliance.
WARNING! Fix the appliance in
accordance with installation instruction
document to avoid a risk of instability
of the appliance.
LOCATION
To ensure best performance, install the appliance
well away from sources of heat such as radiators,
boilers, direct sunlight etc. Make sure that air can
circulate freely around the back of the cabinet.
POSITIONING
Install the appliance in a dry, well ventilated indoors
where the ambient temperature corresponds to the
climate class indicated on the rating plate of the
appliance.
Climate
class
Some functional problems might occur
for some types of models when
operating outside of that range. The
correct operation can only be
guaranteed within the specified
temperature range. If you have any
doubts regarding where to install the
appliance, please turn to the vendor,
to our customer service or to the
nearest Authorised Service Centre.
ELECTRICAL CONNECTION
CAUTION! Any electrical work
required to install this appliance
should be carried out by a qualified
electrician or competent person.
WARNING! This appliance must be
earthed.
The manufacturer declines any liability
should these safety measures not be
observed.
The wires in the mains lead are coloured in
accordance with the following code:
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
5
A
B
C
D
E
• A - green and yellow: Earth
• C - brown: Live
• D - blue: Neutral
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
1. Connect the wire coloured green and yellow to
the terminal marked either with the letter “E“ or
by the earth symbol
yellow.
or coloured green and
2. Connect the wire coloured blue to the terminal
either marked with the letter “N“ or coloured
black.
3. Connect the wire coloured brown to the
terminal either marked with the “L“ or coloured
red.
4. Check that no cut, or stray strands of wire is
present and the cord clamp (E) is secure over
the outer sheath.
Make sure the electricity supply voltage is the
same as that indicated on the appliance rating
plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp fuse (B).
In the event of having to change the fuse in the plug
supplied, a 13 amp ASTA approved (BS 1362)
fuse must be used.
WARNING! A cut off plug inserted
into a 13 amp socket is a serious
safety (shock) hazard. Ensure that it is
disposed of safely.
VENTILATION REQUIREMENTS
CAUTION! Refer to the assembly
instructions for the installation.
OPERATION
SWITCHING ON
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator clockwise to a
medium setting.
SWITCHING OFF
To turn off the appliance, turn the temperature
regulator to the "O" position.
TEMPERATURE REGULATION
The temperature is regulated automatically.
However, you can set a temperature inside the
appliance yourself.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most suitable
one.
To operate the appliance:
1. Turn the temperature regulator clockwise to
obtain a lower temperature inside the
appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
DAILY USE
WARNING! Refer to Safety chapters.
6
POSITIONING THE DOOR SHELVES
To permit storage of food packages of various
sizes, the door shelves can be placed at different
heights.
1. Gradually pull the shelf up until it comes free.
2. Reposition as required.
1
2
3
Do not move the glass shelf above the
vegetable drawer to ensure correct air
circulation.
MOVABLE SHELVES
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
HINTS AND TIPS
NORMAL OPERATING SOUNDS
The following sounds are normal during operation:
• A faint gurgling and bubbling sound from coils
sound when refrigerant is pumped.
• A whirring and pulsating sound from the
compressor when refrigerant is pumped.
• A sudden cracking noise from inside appliance
caused by thermic dilatation (a natural and not
dangerous physical phenomenon).
• A faint click noise from the temperature
regulator when the compressor switches on or
off.
HINTS FOR ENERGY SAVING
• Medium temperature setting preserves fresh
foods while saving energy.
• Fresh Food Compartment (Fridge): Most
efficient use of energy is ensured in the
configuration with the drawers in the bottom
part of the appliance and shelves evenly
distributed. Position of the door bins does not
affect energy consumption.
• Do not open the door frequently or leave it open
longer than absolutely necessary.
•
•
Cover or wrap the food, particularly if it has a
strong flavour.
Position food so that air can circulate freely
around it.
HINTS FOR REFRIGERATION
Useful hints:
• Meat (all types): wrap in a suitable packaging
and place it on the glass shelf above the
vegetable drawer. Store meat for at most 1-2
days.
• Cooked foods, cold dishes: cover and place on
any shelf.
• Fruit and vegetables: clean thoroughly and
place in a special drawer. Bananas, potatoes,
onions and garlic must not be kept in the
refrigerator if not packed.
• Butter and cheese: place in a special airtight
container or wrap in an aluminium foil or a
polythene bag to exclude as much air as
possible.
• Bottles: close with a cap and place on the door
bottle shelf, or (if available) on the bottle rack.
HINTS FOR FRESH FOOD REFRIGERATION
• Do not store warm food or evaporating liquids in
the refrigerator.
7
CARE AND CLEANING
WARNING! Refer to Safety chapters.
CLEANING THE AIR CHANNELS
1. Remove the plinth (A), then the ventilation grid
(B).
GENERAL WARNINGS
CAUTION! Unplug the appliance
before carrying out any maintenance
operation.
This appliance contains hydrocarbons
in its cooling unit; maintenance and
recharging must therefore only be
carried out by authorized technicians.
The accessories and parts of the
appliance are not suitable for washing
in a dishwasher.
CLEANING THE INTERIOR
Before using the appliance for the first time, the
interior and all internal accessories should be
washed with lukewarm water and some neutral
soap to remove the typical smell of a brand-new
product, then dried thoroughly.
CAUTION! Do not use detergents,
abrasive powders, chlorine or oilbased cleaners as they will damage
the finish.
PERIODIC CLEANING
CAUTION! Do not pull, move or
damage any pipes and/or cables
inside the appliance.
CAUTION! Do not damage the
cooling system.
The equipment has to be cleaned regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe them
clean to ensure they are clean and free from
debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser and the
compressor at the back of the appliance with a
brush.
This will improve the performance of the
appliance and save electricity consumption.
8
C
B
A
2. Clean the ventilation grid.
3. Carefully pull the air deflector out (C), checking
that there is no water left from the defrosting.
4. Clean the lower part of the appliance with a
vacuum cleaner.
DEFROSTING OF THE REFRIGERATOR
Frost is automatically eliminated from the
evaporator of the refrigerator compartment every
time the motor compressor stops, during normal
use. The defrost water drains out through a trough
into a special container at the back of the
appliance, over the motor compressor, where it
evaporates.
It is important to periodically clean the defrost water
drain hole (F) situated under the salad drawers to
prevent the water overflowing and dripping onto the
food inside. Use the special cleaner provided (P),
which you will find already inserted into the drain
hole.
F
P
PERIODS OF NON-OPERATION
When the appliance is not in use for long periods,
take the following precautions:
1. Disconnect the appliance from electricity
supply.
2. Remove all food.
3. Clean the appliance and all accessories.
4. Leave the door/doors open to prevent
unpleasant smells.
CAUTION! If you want to keep the
appliance switched on, ask somebody
to check it once in a while to prevent
the food inside from spoiling in case of
a power failure.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
Possible cause
The appliance does not operate.
The appliance is switched off.
Switch on the appliance.
The mains plug is not connected to the mains socket correctly.
Connect the mains plug to the
mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
The appliance is noisy.
The appliance is not supported
properly.
Check if the appliance stands
stable.
The lamp does not work.
The lamp is in stand-by.
Close and open the door.
The lamp is defective.
Refer to "Replacing the lamp".
Temperature is set incorrectly.
Refer to "Operation" chapter.
Many food products to be frozen were put in at the same
time.
Wait a few hours and then
check the temperature again.
The room temperature is too
high.
Refer to climate class chart on
the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool to
room temperature before storing.
The door is not closed correctly.
Refer to "Closing the door".
Water flows on the rear plate
of the refrigerator.
During the automatic defrosting process, frost melts on the
rear plate.
This is correct.
Water flows into the refrigerator.
The water outlet is clogged.
Clean the water outlet.
The compressor operates continually.
Solution
9
Problem
Possible cause
Solution
Food products prevent that
water flows into the water collector.
Make sure that food products
do not touch the rear plate.
Water flows on the floor.
The melting water outlet is not
connected to the evaporative
tray above the compressor.
Attach the melting water outlet
to the evaporative tray.
The temperature in the appliance is too low/too high.
The temperature regulator is
not set correctly.
Set a higher/lower temperature.
The door is not closed correctly.
Refer to "Closing the door".
The food products' temperature is too high.
Let the food products temperature decrease to room temperature before storage.
Many food products are stored
at the same time.
Store less food products at the
same time.
The door has been opened often.
Open the door only if necessary.
There is no cold air circulation
in the appliance.
Make sure that there is cold air
circulation in the appliance.
Door was opened too frequently.
Open the door only when necessary.
Door was not closed completely.
Make sure the door is closed
completely.
Stored food was not wrapped.
Wrap food in suitable packaging before storing it in the appliance.
The ambient temperature is
high and the appliance is set to
the lowest temperature
Set the temperature regulator
to a higher temperature to allow automatic defrosting.
The appliance is fully loaded
and is set to the lowest temperature.
Set the temperature regulator
to a higher temperature to allow automatic defrosting.
You attempted to re-open the
door immediately after closing.
Wait a few seconds between
closing and re-opening of the
door.
There is too much condensed
water on the rear wall of the refrigerator.
There is frost on the rear wall
of the refrigerator.
Door does not open easily.
If the advice does not lead to the
desired result, call the nearest
Authorized Service Centre.
10
REPLACING THE LAMP
The appliance is equipped with a longlife LED interior light.
3. Replace the lamp with the one that has
identical characteristics and is specifically
designed for household appliances.
4. Reassemble the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains socket.
7. Open the door.
Make sure that the light switches on.
It is strongly recommended to use
original spare parts only.
Use LED bulbs (E14 base) only. The
maximum power is shown on the lamp
unit.
CAUTION! Disconnect the plug from
the mains socket.
CLOSING THE DOOR
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to assembly
instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
1. Using a screwdriver, remove the screw from
the lamp cover.
2. Detach the lamp cover in the direction of the
arrows.
TECHNICAL DATA
TECHNICAL DATA
Dimensions of the appliance
Height
815 mm
Width
596 mm
Depth
550 mm
Voltage
230 - 240 V
Frequency
50 Hz
The technical information is situated in the rating
plate, on the external or internal side of the
appliance and on the energy label.
ENVIRONMENTAL CONCERNS
with the symbol with the household waste.
Return the product to your local recycling facility or
contact your municipal office.
Recycle materials with the symbol
. Put the
packaging in relevant containers to recycle it. Help
protect the environment and human health by
recycling waste of electrical and electronic
appliances. Do not dispose of appliances marked
11
*
211625583-A-042020
WWW.ZANUSSI.COM/SHOP
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement