JOHN LEWIS JLBIDW1319 User Manual

JOHN LEWIS JLBIDW1319 User Manual
Dishwasher
JLBIDW1319
User Manual
Contents
Safety information
Children and vulnerable people safety
General Safety
Safety instructions
Installation
Electrical connection
Water connection
Use
Service
Disposal
Installation
Unpacking
Levelling of the appliance
Fixing to the adjacent units
Product description
Control panel
Indicators
Programme selection
Programmes
Extra power
AUTO
Programmes overview
Basic settings
The water softener
The rinse aid empty notification
End sound
AirDry
Key tones
Setting mode
Before first use
The salt container
How to fill the rinse aid dispenser
Daily use
Loading cutlery and dishes
Using the detergent
2
3
3
3
5
5
5
5
6
6
6
7
7
7
7
7
8
9
9
10
10
10
10
10
12
12
13
13
13
14
14
16
16
17
18
18
21
How to select and start a programme
22
How to activate Extra power
22
How to select and start the programme AUTO
22
How to delay the start of a programme
22
How to cancel the delay start while the
countdown operates
22
How to cancel a running programme
22
Opening the door while the appliance operates
22
The Auto Off function
23
End of the programme
23
Hints and tips
24
General
24
Using salt, rinse aid and detergent
24
What to do if you want to stop using multitablets
24
Before starting a programme
24
Loading the baskets
24
Unloading the baskets
25
Care and cleaning
26
Machine Care
26
Internal cleaning
26
External cleaning
26
Cleaning the filters
26
Cleaning the lower spray arm
28
Troubleshooting
29
The washing and drying results are not
satisfactory
30
Product information sheet
33
Additional technical information
34
Water connection
35
Water inlet connection
35
Water drain connection
35
Electrical connection
37
Repairs - after sales service
38
Dishwasher User Manual
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damage that are the result of incorrect installation or usage.
Always keep the instructions in a safe and accessible location for
future reference.
Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons with very
extensive and complex disabilities shall be kept away from the
appliance unless continuously supervised.
Children of less than 3 years of age should be kept away from the
appliance unless continuously supervised.
Do not let children play with the appliance.
Keep detergents away from children.
Keep children and pets away from the appliance when the door is
open.
Children shall not carry out cleaning and user maintenance of the
appliance without supervision.
General Safety
•
This appliance is intended to be used in household and similar
applications such as:
– farm houses; staff kitchen areas in shops, offices and other
working environments;
Dishwasher User Manual
3
by clients in hotels, motels, bed & breakfast and other residential
type environments.
Do not change the specification of this appliance.
The operating water pressure (minimum and maximum) must be
between 0.5 (0.05) / 8 (0.8) bar (MPa)
Follow the maximum number of 13 place settings.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly qualified
persons in order to avoid a hazard.
Put the cutlery in the cutlery basket with the sharp ends pointing
down or put them in the cutlery drawer in a horizontal position
with the sharp edges down.
Do not leave the appliance with the open door unattended to avoid
stepping accidentally onto it.
Before any maintenance operation, deactivate the appliance and
disconnect the mains plug from the socket.
Do not use high pressure water sprays and/or steam to clean the
appliance.
If the appliance has ventilation openings in the base, they must not
be covered e.g. by a carpet.
The appliance is to be connected to the water mains using the new
supplied hose-sets. Old hose sets must not be reused.
–
•
•
•
•
•
•
•
•
•
•
4
Dishwasher User Manual
Safety instructions
Installation
Warning! Only a qualified
person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not use the appliance before installing it in
the built-in structure due to safety manner.
• Follow the installation instructions supplied with
the appliance.
• Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
• Do not install or use the appliance where the
temperature is less than 0 °C.
• Install the appliance in a safe and suitable place
that meets installation requirements.
• Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
• This appliance is fitted with a 13 A mains plug. If
it is necessary to change the mains plug fuse,
use only a 13 A ASTA (BS 1362) fuse (UK and
Ireland only).
Water connection
• Do not cause damage to the water hoses.
• Before connection to new pipes, pipes not used
for a long time, where repair work has been
carried out or new devices fitted (water
meters, etc.), let the water flow until it is clean
and clear.
• Ensure that there are no visible water leaks
during and after the first use of the appliance.
• The water inlet hose has a safety valve and a
sheath with an inner mains cable.
Electrical connection
Warning! Risk of fire and
electric shock.
• The appliance must be earthed.
• Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
• Always use a correctly installed shockproof
socket.
• Do not use multi-plug adapters and extension
cables.
• Make sure not to cause damage to the mains
plug and to the mains cable. Should the mains
cable need to be replaced, this must be carried
out by our Authorised Service Centre.
• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after the
installation.
Dishwasher User Manual
Warning! Dangerous
voltage.
• If the water inlet hose is damaged, immediately
close the water tap and disconnect the mains
plug from the mains socket. Contact the
Authorised Service Centre to replace the water
inlet hose.
5
Use
• Do not put flammable products or items that
are wet with flammable products in, near or on
the appliance.
• Dishwasher detergents are dangerous. Follow
the safety instructions on the detergent
packaging.
• Do not drink and play with the water in the
appliance.
• Do not remove the dishes from the appliance
until the programme is complete. Some
detergent may remain on the dishes.
• Do not sit or stand on the open door of the
appliance.
• The appliance can release hot steam if you open
the door while a programme operates.
Service
• To repair the appliance contact the Authorised
Service Centre.
• Use original spare parts only.
Disposal
Warning! Risk of injury or
suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and
pets to get closed in the appliance.
6
Dishwasher User Manual
Installation
Warning!
• It is dangerous to alter the
specifications or attempt to
modify the appliance in any way.
• This appliance is heavy. Care
should be taken when moving it.
• Care must be taken to ensure
that the appliance does not stand
on the electrical supply cable.
• Any electrical or plumbing work
required to install this appliance
must be carried out by a qualified
electrician or plumber.
Unpacking
Insert the appliance after the adjustment of the
appliance level. When inserting the appliance,
ensure that the water inlet and drain hoses are
not kinked or squashed. During all operations
that involve accessibility to internal components
the appliance must be unplugged. Be sure that
once the appliance has been installed, it is easily
accessible for the service engineer in the event
that a repair is required.
Fixing to the adjacent units
The appliance must be secured against tilting.
Therefore make sure, that the counter it is fixed
under, is suitably secured to a fixed structure
(e.g. adjacent kitchen unit cabinets, wall).
• Remove all packaging before positioning the
appliance.
• Position the appliance next to a water tap and a
drain.
Levelling of the appliance
Good levelling is essential for correct closure
and sealing of the appliance door. When the
appliance is correctly levelled, the door will not
catch on either side of the cabinet. If the
appliance door does not close correctly, loosen
or tighten the adjustable feet until the level of
the appliance is perfect.
Caution! Carefully follow the
instructions on the enclosed
template for building in the
appliance and fitting the
furniture panel.
Dishwasher User Manual
7
Product description
1 2
11
10 9
1.
2.
3.
4.
5.
6.
8
Upper spray arm
Lower spray arm
Filters
Rating plate
Salt container
Air vent
8 7
6 5 4 3
7.
8.
9.
10.
11.
Rinse aid dispenser
Detergent dispenser
Cutlery basket
Lower basket
Upper basket
Dishwasher User Manual
Control panel
1 2
1.
2.
3.
4.
3
On/Off button / Reset button
Delay start button
Indicators
Programme buttons
4
5
6
5. Extra power button
6. AUTO programme button
Indicators
Indicator
Description
The ECO programme indicator. It indicates the most environmentally friendly programme
selection for a normally soiled load. Refer to "Programme selection".
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer to "Before
first use".
Salt indicator. It is on when the salt container needs refilling. Refer to "Before first use".
Machine Care indicator. It is on when the appliance needs internal cleaning with the Machine
Care programme. Refer to "Care and cleaning".
Drying phase indicator. It is on when a programme with the drying phase is selected. It flashes when the drying phase operates. Refer to "Programme selection".
Dishwasher User Manual
9
Programme selection
Extra power
Programmes
A
B
Extra power improves the washing results of the
selected programme. The option increases the
wash temperature and duration.
C
AUTO
The AUTO program automatically adjusts the
wash cycle to the type of load.
A. 30min is the shortest programme suitable for
washing a load with fresh and light soil.
B. 90min is a programme suitable for washing
and drying normally soiled items.
C. ECO is the longest programme (4h) offering
the most efficient use of energy and water
consumption for crockery and cutlery with
normal soil. This is the standard programme
for test institutes.
The appliance senses the degree of soil and the
amount of dishes in the baskets. It adjusts the
temperature and quantity of water as well as the
wash duration.
Programmes overview
Programme Type of load
Degree of soil
Programme phases
Options
30min
•
•
Crockery
Cutlery
•
Fresh
•
•
•
•
Wash 50 °C
Intermediate rinse
Final rinse 45 °C
AirDry
•
Extra power
90min
•
•
•
•
Crockery
Cutlery
Pots
Pans
•
•
Normal
Lightly driedon
•
•
•
•
•
Wash 60 °C
Intermediate rinse
Final rinse 55 °C
Drying
AirDry
•
Extra power
ECO
•
•
•
•
Crockery
Cutlery
Pots
Pans
•
•
Normal
Lightly driedon
•
•
•
•
•
•
Prewash
Wash 50 °C
Intermediate rinse
Final rinse 60 °C
Drying
AirDry
•
Extra power
10
Dishwasher User Manual
Programme Type of load
Degree of soil
Programme phases
Options
AUTO
Crockery
Cutlery
Pots
Pans
The programme
adjusts to all degrees of soil.
•
•
•
•
•
•
Prewash
Wash 50 - 60 °C
Intermediate rinse
Final rinse 55 °C
Drying
AirDry
Options are not applicable to this programme.
No load
The programme
cleans the appliance interior.
Refer to "Care
and cleaning".
•
•
•
•
Wash 65 °C
Intermediate rinse
Final rinse
AirDry
Options are not applicable to this programme.
•
•
•
•
Machine Care •
Consumption values
Water (l)
Energy (kWh)
Duration (min)
30min
9.4 -11.4
0.57 - 0.69
30
90min
9.1 - 11.1
1.01 - 1.13
90
ECO
9.9
0.921
240
AUTO
8.2 - 11.2
0.67 - 1.08
120 - 170
Machine Care
8.4 - 10.2
0.60 - 0.71
60
Programme 1)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can
change the values.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g. according to
EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the product
number code (PNC) found on the rating plate.
For any other questions regarding your
dishwasher please refer to the service book
provided with your appliance.
Dishwasher User Manual
11
Basic settings
You can configure the appliance by changing
basic settings according to your needs.
Settings
Values
Description1)
Water hardness
From level 1L to level
10L
Adjust the level of the water softener according to the water
hardness in your area.
Factory setting: 5L.
Rinse aid empty notification
On (default)
Off
Activate or deactivate the rinse aid indicator.
End sound
On (default)
Off
Activate or deactivate the acoustic signal for the end of a
programme.
Auto door open
On (default)
Off
Activate or deactivate the AirDry.
Key tones
On (default)
Off
Activate or deactivate the sound of the buttons when pressed.
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode. Instructions on how to configure the
appliance are provided further in this chapter.
The higher the content of these minerals, the
harder your water is. Water hardness is
measured in equivalent scales.
When the appliance is in setting mode, the
display shows a digit and a letter. For each
setting, a dedicated letter is displayed. The
dedicated letters are indicated in the table.
The water softener should be adjusted
according to the hardness of the water in your
area. Your local water authority can advise you
on the hardness of the water in your area. It is
important to set the right level of the water
softener to assure good washing results.
The order of the basic settings presented in the
table is also the order of the settings in setting
mode.
The water softener
The water softener removes minerals from the
water supply, which would have a negative effect
on the washing results and on the appliance.
12
Softening hard water increases the
consumption of water and energy
as well as the programme duration.
The higher the level of water
softener, the higher the
consumption and the longer the
duration.
Dishwasher User Manual
Water hardness
German degrees
(°dH)
French degrees
(°fH)
mmol / l
Clarke degrees
Water softener level
47 - 50
84 - 90
8.4 - 9.0
58 - 63
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
5 1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
2
<4
<7
<0.7
<5
1 2)
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent used,
set the proper water hardness level to
keep the salt refill indicator active.
Multi-tabs containing salt are not
effective enough to soften hard
water.
The rinse aid empty
notification
The rinse aid helps to dry the dishes without
streaks and stains. It is automatically released
during the hot rinse phase.
When the rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill rinse
aid. If the drying results are satisfactory while
using multi-tablets only, it is possible to
deactivate the notification for refilling rinse aid.
However, for best drying performance, always
use rinse aid.
End sound
You can activate an acoustic signal that sounds
when the programme is completed.
Acoustic signals sound also when a
malfunction of the appliance
occurs. It is not possible to
deactivate these signals.
AirDry
AirDry improves the drying results. The
appliance door opens automatically during the
drying phase and remains ajar.
If standard detergent or multi-tablets without
rinse aid are used, activate the notification to
keep the rinse aid refill indicator active.
Dishwasher User Manual
13
• The lights related to the programme
buttons are on.
How to navigate in setting mode
You can navigate in setting mode using
programme buttons.
A
AirDry is automatically activated with all
programmes.
Use Previous and Next to switch between the
basic settings and to change their value.
Use OK to enter the selected setting and to
confirm changing its value.
Caution! If children have
access to the appliance, we
advise to deactivate AirDry.
The automatic opening of the
door may pose a danger.
How to change a setting
Make sure the appliance is in setting mode.
1. Press Previous or Next until the indicator
dedicated to the desired setting flashes.
The light related to Delay start indicates the
current setting value:
Key tones
The buttons on the control panel make a click
sound when you press them. You can deactivate
this sound.
Setting mode
How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode
while the programme is running.
2.
To enter setting mode, press and hold
simultaneously 30min and ECO for about 3
seconds.
• The light related to Delay start and the
3.
4.
flash.
• The indicators
on.
14
C
A. Previous button
B. OK button
C. Next button
Caution! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
indicator
B
,
,
and
are
5.
• For the settings with two values (on and
off), the light is either on (= the setting is
on) or off (= the setting is off).
• For the settings with multiple values
(levels), the light flashes. The number of
flashes indicates the current setting value
(e.g. 5 flashes + pause + 5 flashes... = level
5).
Press OK to enter the setting.
• The indicator related to the setting is on.
• The other indicators are off.
• The light related to Delay start indicates
the current setting value.
Press Previous or Next to change the value.
Press OK to confirm the setting.
• The new setting is saved.
• The appliance returns to the setting
selection.
Press and hold simultaneously 30min and
ECO for about 3 seconds to exit setting
mode.
Dishwasher User Manual
The appliance returns to the programme
selection.
The saved settings remain valid until you change
them again.
Dishwasher User Manual
15
Before first use
1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the
level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start the programme 30min to remove any
residuals from the manufacturing process. Do
not use detergent and do not put dishes in the
baskets.
After starting the programme, the appliance
recharges the resin in the water softener for up
to 5 minutes. The washing phase starts only
after this procedure is complete. The procedure
is repeated periodically.
4. Carefully shake the funnel by its handle to get
the last granules inside.
5. Remove the salt around the opening of the salt
container.
The salt container
Caution! Use rough salt
designed for dishwashers only.
Fine salt increases the risk of
corrosion.
The salt is used to recharge the resin in the
water softener and to assure good washing
results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container (only
for the first time).
3. Fill the salt container with 1 kg of salt (until it is
full).
16
6. Turn the cap of the salt container clockwise to
close the salt container.
Caution! Water and salt can
come out of the salt container
when you fill it. After you fill
the salt container,
immediately start a
programme to prevent
corrosion.
Dishwasher User Manual
How to fill the rinse aid
dispenser
A DB
M AX
4
1
3 2
+
-
C
Caution! Only use rinse aid
specifically designed for
dishwashers.
1. Press the release button (D) to open the lid
(C).
2. Pour the rinse aid in the dispenser (A) until the
liquid reaches the fill level 'max'.
3. Remove the spilled rinse aid with an absorbent
cloth to prevent too much foam.
4. Close the lid. Make sure that the release
button locks into position.
You can turn the selector of the
released quantity (B) between
position 1 (lowest quantity) and
position 4 or 6 (highest quantity).
Dishwasher User Manual
17
Daily use
1. Open the water tap.
2. Press and hold
until the appliance is
activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the programme is
complete.
Loading cutlery and dishes
Warning! Always close the
appliance door after loading
the baskets. An open door can
be a hazard.
Caution! Always ensure that
the spray arms can rotate
freely before you close the
appliance door and start the
programme.
The lower basket
The lower basket is designed to take pots, pans,
lids, dishes, salad bowls and cutlery. Serving
dishes and large lids should be arranged around
the edge of the basket, ensuring that the spray
arms can turn freely.
18
Dishwasher User Manual
The cutlery basket
Warning! Knives with long
blades, stored in an upright
position, are a potential
hazard. Long and/or sharp
items of cutlery such as
carving knives must be
positioned horizontally in the
upper basket. Take care when
loading or unloading sharp
items such as knives. Forks
and spoons should be placed
in the removable cutlery
basket with the handles facing
downwards and the knives
with their handles facing
upwards
The upper basket
Arrange items on and underneath the cup racks
so that water can reach all surfaces.
Mix spoons with other cutlery to prevent them
from sticking together. For best results we
recommend you use the cutlery grid. If the size
and dimensions of the cutlery do not allow the
use of the grid, this can be easily removed.
Dishwasher User Manual
19
Caution! Ensure that the
spray arms can rotate freely
before you close the appliance
door.
Adjusting the height of the upper basket
Caution! Never lift or lower
the basket on one side only.
To load very large plates move the upper basket
to the higher position.
Glasses with long stems can be placed upside
down in the cup racks. For taller items, the cup
racks can be folded upwards.
20
Dishwasher User Manual
240 mm
m
27
0m
Moving back the upper basket to the lower
position
200 mm
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and then allow
the mechanism to drop back down slowly,
keeping hold of it.
Using the detergent
A
31
0m
B
m
C
Moving the upper basket to the higher
position
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards until the
mechanism is engaged and the basket is stable.
Dishwasher User Manual
1. Press the release button (B) to open the lid
(C).
2. Put the detergent, in powder or tablets, in the
compartment (A).
3. If the programme has a prewash phase, put a
small quantity of detergent on the inner part of
the appliance door.
4. Close the lid. Make sure that the release
button locks into position.
21
How to select and start a
programme
How to delay the start of a
programme
1. Press the button dedicated to the programme
you want to set.
You can delay the start of the selected
programme by 3 hours.
The light related to the button is on.
2. Activate Extra power if desired.
3. Close the appliance door to start the
programme.
How to activate Extra power
1. Select a programme.
2. Press Extra power.
The light related to the button is on.
Extra power is not a permanent
option and must be activated every
time before you start a
programme.
It is not possible to activate or
deactivate Extra power while a
programme is running.
Activating Extra power increases
the water and energy consumption
as well as the programme duration.
How to select and start the
programme AUTO
1. Press AUTO.
The light related to the button is on.
Extra power is not applicable to
this programme.
2. Close the appliance door to start the
programme.
The appliance senses the type of load and
adjusts a suitable wash cycle.
1. Select a programme.
2. Press Delay start.
The light related to the button is on.
3. Close the appliance door to start the
countdown.
During the countdown, it is not possible to
change the programme selection.
When the countdown is complete, the
programme starts.
How to cancel the delay start
while the countdown operates
Press and hold
for about 3 seconds.
The appliance returns to the programme
selection.
If you cancel the delay start, you
have to select the programme
again.
How to cancel a running
programme
Press and hold
for about 3 seconds.
The appliance returns to the programme
selection.
Make sure that there is detergent in
the detergent dispenser before you
start a new programme.
Opening the door while the
appliance operates
Opening the door while a programme is running
stops the appliance. It may affect the energy
consumption and the programme duration.
After closing the door, the appliance continues
from the point of interruption.
22
Dishwasher User Manual
If the door is opened for more than
30 seconds during the drying
phase, the running programme
ends. It does not happen if the
door is opened by AirDry function.
The Auto Off function
This function saves energy by switching the
appliance off when it is not operating.
The function comes into operation
automatically:
• When the programme is completed.
• After 5 minutes if a programme was not
started.
End of the programme
When the programme is complete, the Auto
Off function switches the appliance off
automatically.
All buttons are inactive except for the on/off
button.
Dishwasher User Manual
23
Hints and tips
General
Follow the hints below to ensure optimal
cleaning and drying results in daily use and to
help you protect the environment.
• Remove larger residues of food from the dishes
into the waste bin.
• Do not pre-rinse dishes by hand. When
needed, select a programme with a prewash
phase.
• Always use the whole space of the baskets.
• Make sure that items in the baskets do not
touch or cover each other. Only then can the
water completely reach and wash the dishes.
• You can use dishwasher detergent, rinse aid
and salt separately or you can use the multitablets (e.g. ''All in 1''). Follow the instructions
on the packaging.
• Select a programme according to the type of
load and the degree of soil. ECO offers the
most efficient use of water and energy
consumption.
Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent designed
for dishwasher. Other products can cause
damage to the appliance.
• In areas with hard and very hard water, we
recommend to use basic dishwasher detergent
(powder, gel, tablets containing no additional
agents), rinse aid and salt separately for optimal
cleaning and drying results.
• Detergent tablets do not fully dissolve with
short programmes. To prevent detergent
residues on the tableware, we recommend that
you use tablets with long programmes.
• Do not use more than the correct quantity of
detergent. Refer to the instructions on the
detergent packaging.
24
What to do if you want to stop
using multi-tablets
Before you start using separately detergent, salt
and rinse aid, complete the following steps:
1. Set the highest level of the water softener.
2. Make sure that the salt and rinse aid containers
are full.
3. Start the 30min programme. Do not add
detergent and do not put dishes in the baskets.
4. When the programme is completed, adjust the
water softener according to the water
hardness in your area.
5. Adjust the released quantity of rinse aid.
Before starting a programme
Before you start the selected programme, make
sure that:
•
•
•
•
The filters are clean and correctly installed.
The cap of the salt container is tight.
The spray arms are not clogged.
There is enough salt and rinse aid (unless you
use multi-tablets).
• The arrangement of the items in the baskets is
correct.
• The programme is suitable to the type of load
and the degree of soil.
• The correct quantity of detergent is used.
Loading the baskets
• Use the appliance to wash dishwasher-safe
items only.
• Do not wash in the appliance items made of
wood, horn, aluminium, pewter and copper.
• Do not wash in the appliance items that can
absorb water (sponges, household cloths).
• Remove large food residues from dishes.
Dishwasher User Manual
• Soak cookware with burnt-on food before
washing it in the appliance.
• Put hollow items (cups, glasses and pans) with
the opening facing downwards.
• Make sure that glasses do not touch each other.
• Put light items in the upper basket. Make sure
that the items do not move freely.
• Put cutlery and small items in the cutlery basket.
• Make sure that the spray arms can move freely
before you start a programme.
Unloading the baskets
1. Let the tableware cool down before you
remove it from the appliance. Hot items can
be easily damaged.
2. First remove items from the lower basket,
then from the upper basket.
After the programme is completed,
water can still remain on the inside
surfaces of the appliance.
Dishwasher User Manual
25
Care and cleaning
Warning! Before any
maintenance other than
running the programme
Machine Care, deactivate the
appliance and disconnect the
mains plug from the main
socket.
Dirty filters and clogged spray arms
negatively affect the washing
results. Check these elements
regularly and, if necessary, clean
them.
Machine Care
Machine Care is a programme designed to clean
the appliance interior with optimal results. It
removes limescale and grease buildup.
When the programme is complete, the indicator
is off.
Internal cleaning
• Carefully clean the appliance, including the
rubber gasket of the door, with a soft damp
cloth.
• Do not use abrasive products, abrasive cleaning
pads, sharp tools, strong chemicals, scourer or
solvents.
• To maintain the performance of your appliance,
use a cleaning product designed specifically for
dishwashers at least once every two months.
Carefully follow the instructions on the
packaging of the product.
• For optimal cleaning results, start the Machine
Care programme.
External cleaning
When the appliance senses the need for
cleaning, the indicator
is on. Start the
Machine Care programme to clean the
appliance interior.
• Clean the appliance with a moist soft cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning
pads or solvents.
How to start the Machine Care
programme
Cleaning the filters
Before starting the Machine Care
programme, clean the filters and
spray arms.
The filter system is made of 3 parts.
1. Use a descaler or a cleaning product designed
specifically for dishwashers. Follow the
instructions on the packaging. Do not put
dishes in the baskets.
2. Press and hold simultaneously Extra power
and AUTO for about 3 seconds.
The indicators
and Extra power flash.
3. Close the appliance door to start the
programme.
26
Dishwasher User Manual
C
B
A
1. Turn the filter (B) counterclockwise and
remove it.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
5. Make sure that there are no residues of food
or soil in or around the edge of the sump.
6. Put back in place the flat filter (A). Make sure
that it is correctly positioned under the 2
guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter (A). Turn
it clockwise until it locks.
4. Wash the filters.
Dishwasher User Manual
27
Caution! An incorrect
position of the filters can
cause bad washing results and
damage to the appliance.
Cleaning the lower spray arm
We recommend to clean the lower spray arm
regularly to prevent soil from clogging the holes.
Clogged holes can cause unsatisfactory washing
results.
1. To remove the lower spray arm, pull it
upwards.
2. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes.
3. To install the spray arm back, press it
downwards.
28
Dishwasher User Manual
Troubleshooting
Warning! Improper repair of
the appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
The majority of problems that may
occur can be solved without the need to
contact an Authorised Service Centre.
Refer to the below table for information on
possible problems.
Problem and alarm code
Possible cause and solution
You cannot activate the appliance.
•
•
Make sure that the mains plug is connected to the mains socket.
Make sure that there is no damaged fuse in the fuse box.
The programme does not start.
•
•
Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or wait for the end of the
countdown.
The appliance recharges the resin inside the water softener. The duration of the procedure is approximately 5 minutes.
•
The appliance does not fill with water.
• The lights related to the programme buttons flash 1 time intermittently.
• An acoustic signal sounds intermittently.
•
•
•
•
•
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low. For
this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clogged.
Make sure that the inlet hose has no kinks or bends.
The appliance does not drain the
water.
• The lights related to the programme buttons flash 2 times
intermittently.
• An acoustic signal sounds intermittently.
•
•
•
•
Make sure that the sink spigot is not clogged.
Make sure that the filter in the outlet hose is not clogged.
Make sure that the interior filter system is not clogged.
Make sure that the drain hose has no kinks or bends.
Dishwasher User Manual
29
Problem and alarm code
Possible cause and solution
The anti-flood device is on.
• The lights related to the programme buttons flash 3 times
intermittently.
• An acoustic signal sounds intermittently.
•
Close the water tap and contact an Authorised Service Centre.
The appliance stops and starts
more times during operation.
•
It is normal. It provides optimal cleaning results and energy savings.
The programme lasts too long.
•
If the delay start option is set, cancel the delay setting or wait for the
end of the countdown.
Activating Extra power increases the programme duration.
•
Small leak from the appliance door.
•
The appliance is not levelled. Loosen or tighten the adjustable feet (if
applicable).
The appliance door is not centred on the tub. Adjust the rear foot (if
applicable).
•
The appliance door is difficult to
close.
•
The appliance is not levelled. Loosen or tighten the adjustable feet (if
applicable).
Parts of the tableware are protruding from the baskets.
•
Rattling or knocking sounds from
the inside of the appliance.
The tableware is not properly arranged in the baskets. Refer to "Daily use".
Make sure that the spray arms can rotate freely.
•
•
The appliance trips the circuit-beak- •
er.
The amperage is insufficient to supply simultaneously all the appliances
in use. Check the socket amperage and the capacity of the meter or
turn off one of the appliances in use.
Internal electrical fault of the appliance. Contact an Authorised Service
Centre.
•
Once you have checked the appliance,
deactivate and activate the appliance. If the
problem occurs again, contact an Authorised
Service Centre.
The washing and drying results are not satisfactory
Problem
Possible cause and solution
Poor washing results.
•
•
•
•
30
Refer to "Daily use", "Hints and tips" and the basket loading
leaflet.
Use more intensive washing programme.
Activate the Extra power option to improve the washing results of a
selected programme.
Clean spray arm jets and filter. Refer to "Care and Cleaning".
Dishwasher User Manual
Problem
Possible cause and solution
Poor drying results.
•
•
•
•
•
•
There are whitish streaks or bluish
layers on glasses and dishes.
•
•
There are stains and dry water drops
on glasses and dishes.
•
•
Tableware was left for too long inside the closed appliance. Activate
AirDry to set the automatic opening of the door and to improve
the drying performance.
There is no rinse aid or the dosage of rinse aid is not sufficient. Fill
the rinse aid dispenser or set the level of rinse aid to a higher level.
The quality of the rinse aid can be the cause.
We recommend to use rinse aid always, even in combination with
multi-tablets.
Plastic items may need to be towel dried.
The programme does not have the drying phase. Refer to "Programmes overview".
The released quantity of rinse aid is too high. Adjust the rinse aid
level to a lower level.
The quantity of detergent is too high.
The released quantity of rinse aid is not sufficient. Adjust the rinse
aid level to a higher level.
The quality of the rinse aid can be the cause.
The interior of the appliance is wet.
•
This is not a defect of the appliance. Humid air condensates on the
appliance walls.
Unusual foam during washing.
•
•
Use the detergent designed specifically for dishwashers.
There is a leak in the rinse aid dispenser. Contact an Authorised
Service Centre.
Traces of rust on cutlery.
•
There is too much salt in the water used for washing. Refer to
"The water softener".
Silver and stainless steel cutlery were placed together. Do not put
silver and stainless steel items close together.
•
There are residues of detergent in the •
dispenser at the end of the programme.
•
•
Odours inside the appliance.
Dishwasher User Manual
•
•
The detergent tablet was stuck in the dispenser and therefore was
not completely washed away by water.
Water cannot wash away the detergent from the dispenser. Make
sure that the spray arms are not blocked or clogged.
Make sure that items in the baskets do not impede the lid of the detergent dispenser from opening.
Refer to "Internal cleaning".
Start the Machine Care programme with a descaler or a cleaning
product designed for dishwashers.
31
Problem
Possible cause and solution
Limescale deposits on the tableware,
on the tub and on the inside of the
door.
•
•
•
•
•
•
•
•
Dull, discoloured or chipped tableware.
•
•
•
The level of salt is low, check the refill indicator.
The cap of the salt container is loose.
Your tap water is hard. Refer to "The water softener".
Use salt and set regeneration of the water softener even when multi-functional tablets are used. Refer to "The water softener".
Start the Machine Care programme with a descaler designed for
dishwashers.
If limescale deposits still remain, clean the appliance with appliance
cleaners which are particularly suitable for this purpose.
Try a different detergent.
Contact the detergent manufacturer.
Make sure that only dishwasher-safe items are washed in the appliance.
Load and unload the basket carefully. Refer to the basket loading
leaflet.
Place delicate items in the upper basket.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible causes.
32
Dishwasher User Manual
Product information sheet
Trade Mark
John Lewis
Model
JLBIDW1319 911535231
Rated capacity (standard place settings)
13
Energy efficiency class
A++
Energy consumption in kWh per year, based on 280 standard clean- 262
ing cycles using cold water fill and the consumption of the low power
modes. The actual energy consumption will depend on how the appliance is used.
Energy consumption of standard cleaning cycle (kWh)
0.921
Power consumption in off mode (W)
0.50
Power consumption in left-on mode (W)
5.0
Water consumption in litres per year, based on 280 standard clean- 2772
ing cycles. The actual water consumption will depend on how the appliance is used
Drying efficiency class on a scale from G (least efficient) to A (most
efficient)
A
The ‘standard programme’ is the standard cleaning cycle to which
the information in the label and the fiche relates. This programme is
suitable to clean normally soiled tableware and is the most efficient
programme in terms of combined energy and water consumption. It
is indicated as "Eco" programme.
ECO
Programme time of standard cleaning cycle (min)
240
Duration of the left-on mode (min)
1
Sound power level (db(A) re 1pW)
46
Built in appliance Y/N
Yes
Dishwasher User Manual
33
Additional technical information
Dimensions
Width / height / depth (mm)
596 / 818 - 898 / 550
Electrical connection 1)
Voltage (V)
220 - 240
Frequency (Hz)
50
Water supply pressure
Min. / max.
bar (MPa)
0.5 (0.05) / 8 (0.8)
Water supply
Cold water or hot water 2)
max 60 °C
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.
34
Dishwasher User Manual
Water connection
Water inlet connection
This appliance may be fed with either hot
(maximum 60 °C) or cold water. Nevertheless
we advise you use a cold water supply. A hot
water supply is not always efficient with heavily
soiled crockery as it shortens the washing
programmes a lot. For making the connection
itself, the coupling nut fitted to the appliance
inlet hose is designed to screw onto a 3/4" gas
thread spout or to a purpose made quickcoupling tap such as the Press-block. The water
pressure must be within the limits given in the
‘Technical data’. Your local Water Authority will
advise you on the average mains pressure in
your area. The water inlet hose must not be
kinked, crushed, or entangled when it is being
connected. The appliance features inlet and
drain hoses which can be turned either to the
left or the right to suit the installation by means
of the locknut. The locknut must be correctly
fitted to avoid water leaks. If the appliance is
connected to new pipes or pipes which have not
been used for a long time, you should run the
water for a few minutes before connecting the
inlet hose. This appliance has been fitted with
safety features which will prevent the water
used in the appliance from returning back into
the drinking water system. This appliance
complies with the applicable plumbing
regulations.
Caution! Do not use inlet and
drain hoses which have
previously been used on
another appliance.
Water drain connection
The end of the drain hose can be connected in
the following ways:
Dishwasher User Manual
• To the sink outlet spigot, securing it to the
underside of the work surface. This will prevent
waste water from the sink running into the
appliance.
• To a stand pipe provided with venthole,
minimum internal diameter 4 cm.
max. 850 mm
max.
4000 mm
min. 400 mm
The drain hose can face either to the right or left
of the appliance. Ensure the drain hose is not
bent or squashed as this could prevent or slow
down the discharge of water. The sink plug must
not be in place when the appliance is draining as
this could cause the water to syphon back into
the appliance. If you use a drain hose extension,
the internal diameter must be no smaller than
the diameter of the hose provided. Likewise the
internal diameter of the couplings used for
connections to the waste outlet must be no
smaller than the diameter of the hose provided.
Our appliances are supplied with a security
device to protect against the return of dirty
water back into the appliance. If the spigot of
your sink has a "no return valve" incorporated
this can prevent the correct draining of your
appliance. We therefore advise you to remove
it. When connecting the drain hose to an under
sink trap spigot, the entire plastic membrane (A)
35
must be removed. Failure to remove all the
membrane will result in food particles building
up over time eventually blocking the appliance
drain hose spigot.
A
36
Dishwasher User Manual
Electrical connection
Warning! The manufacturer
accepts no liability for failure
to observe the following
safety precautions.
• Safety standards require the appliance to be
earthed.
• Prior to using the appliance for the first time,
ensure that the rated voltage and type of supply
on the rating plate match that of the supply
where the appliance is to be installed. The fuse
rating is also to be found on the rating plate.
• Always plug the mains plug into a correctly
installed shockproof socket.
• Multi-way plugs, connectors and extension
cables must not be used. This could constitute a
fire hazard through overheating.
Dishwasher User Manual
• If necessary, have the domestic wiring system
socket replaced. In case that the electrical cable
has to be replaced, contact your local repair
agent.
• The plug must be accessible after the appliance
has been installed.
• Never unplug the appliance by pulling on the
cable. Always pull the plug.
• The appliance is supplied with a 13 amp plug
attached. Use a 13 amp ASTA approved (BS
1362) fuse if it is necessary to change the fuse in
the plug supplied.
• This appliance complies with the E.C.C.
Directives.
37
Repairs - after sales service
Your John Lewis appliance comes with a three
year guarantee. Your original receipt acts as
your guarantee. Please make sure you retain it.
The guarantee does not cover you against faults
caused by accidental damage or misuse. For
further details visit johnlewis.com/customerservices. If it is not working correctly refer to
the "Troubleshooting" chapter in this user
manual. If a fault occurs which you can not
resolve through following the advice and
information contained within this instruction
manual, the next step is to contact John Lewis
technical support on:
0330 1230106
They will give you details for your local service
engineer. Before calling out an engineer, please
ensure you have read the details under the
heading “Troubleshooting”.
When you contact your local service engineer
you will need to give the following details:
1.
2.
3.
4.
5.
Your name, address and post code
Your telephone number
Clear and concise details of fault
The purchase date as found on your receipt
The model and serial number of the appliance.
So that you always have these numbers at
hand, we recommend you to make a note of
them here:
• Mod.......................................
• P.N.C.....................................
• S.N.........................................
IMPORTANT: If you call out an engineer
to a fault listed under the heading
''Troubleshooting'', or to repair a fault
caused by incorrect use or installation, a
charge will be made even if the appliance
is under guarantee.
Spare parts
38
Always insist on genuine spare parts.
An authorised service engineer should service
this product, and only genuine spare parts
should be used. Under no circumstances should
you attempt to repair the appliance yourself.
Repairs carried out by inexperienced persons
may cause injury or serious malfunctioning.
Please contact John Lewis technical support on
0330 1230106 for assistance.
Shopping is easy with John Lewis Shops
John Lewis, Aberdeen 01224 625 000
John Lewis, Basingstoke 01256 406200
John Lewis, Bluewater 01322 624 123
John Lewis, Brent Cross 020 8202 6535
John Lewis, Birmingham 0345 604 9049
John Lewis, Cambridge 01223 361 292
John Lewis, Cardiff 02920 536 000
John Lewis, Cheadle 0161 491 4914
John Lewis, Chelmsford 0124 545 8400
John Lewis, Cribbs Causeway 0117 959 1100
John Lewis, Edinburgh 0131 556 9121
John Lewis, Exeter 01392 284150
John Lewis, Glasgow 0141 353 6677
John Lewis, High Wycombe 01494 462 666
John Lewis, Kingston 020 8547 3000
John Lewis, Leicester 0116 242 5777
John Lewis, Leeds 0113 3946299
John Lewis, Liverpool 0151 709 7070
John Lewis, Milton Keynes 01908 679 171
John Lewis, Newcastle upon Tyne 0191 232 5000
John Lewis, Norwich 01603 660 021
John Lewis, Nottingham 0115 941 8282
John Lewis, Oxford Street 020 7629 7711
John Lewis, Peterborough 01733 344 644
John Lewis, Reading 0118 957 5955
John Lewis, Sheffield 0114 276 8511
Peter Jones, Sloane Square 020 7730 3434
John Lewis, Solihull 0121 704 1121
Dishwasher User Manual
John Lewis, Southampton 02380 216 400
Knight & Lee, Southsea 02392 827 511
John Lewis, Stratford 020 8532 3500
John Lewis, The Trafford Centre 0161 491 4040
John Lewis, Watford 01923 244 266
John Lewis, Welwyn 01707 323 456
John Lewis at home
John Lewis, Ashford 01233 811 010
John Lewis, Chester 01244 393 880
Dishwasher User Manual
John Lewis, Chichester 01243 813 030
John Lewis, Croydon 020 8662 4730
John Lewis, Horsham 01403 214 740
John Lewis, Ipswich 01473 275 850
John Lewis, Newbury 01635 263 980
John Lewis, Poole 01202 756 020
John Lewis, Swindon 01793 733 180
John Lewis, Tamworth 01827 300 580
John Lewis, Tunbridge Wells 01892 506 830
John Lewis, York 01904 557 950
39
Environmental concerns
marked with the symbol with the household
waste. Return the product to your local
recycling facility or contact your municipal office.
Recycle materials with the symbol . Put the
packaging in relevant containers to recycle it.
Help protect the environment and human health
by recycling waste of electrical and electronic
appliances. Do not dispose of appliances
40
Dishwasher User Manual
*
Dishwasher User Manual
41
42
Dishwasher User Manual
Dishwasher User Manual
43
156934120-A-232019 ( Subject to change without notice. )
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement