Electrolux WAGL6S300 User Manual

Add to my manuals
40 Pages

advertisement

Electrolux WAGL6S300 User Manual | Manualzz

WAGL6S300

EN Washing Machine User Manual

2 www.electrolux.com

CONTENTS

1. SAFETY INFORMATION....................................................................................3

2. SAFETY INSTRUCTIONS..................................................................................4

3. INSTALLATION.................................................................................................. 6

4. ACCESSORIES................................................................................................10

5. PRODUCT DESCRIPTION.............................................................................. 10

6. CONTROL PANEL........................................................................................... 11

7. DIAL AND BUTTONS....................................................................................... 13

8. PROGRAMMES............................................................................................... 15

9. SETTINGS........................................................................................................20

10. BEFORE FIRST USE..................................................................................... 20

11. DAILY USE..................................................................................................... 20

12. HINTS AND TIPS........................................................................................... 25

13. CARE AND CLEANING..................................................................................26

14. TROUBLESHOOTING....................................................................................31

15. CONSUMPTION VALUES..............................................................................34

16. TECHNICAL DATA.........................................................................................35

17. QUICK GUIDE................................................................................................36

18. PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION

1369/2017.............................................................................................................37

19. GUARANTEE ................................................................................................ 38

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

Welcome to Electrolux.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information: www.electrolux.com/webselfservice

Register your product for better service: www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance: www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

ENGLISH

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.

Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.

Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.

Do not let children play with the appliance.

Keep all packaging away from children and dispose of it appropriately.

Keep detergents away from children.

Keep children and pets away from the appliance when the door is open.

If the appliance has a child safety device, it should be activated.

Children shall not carry out cleaning and user maintenance of the appliance without supervision.

1.2 General Safety

Do not change the specification of this appliance.

3

4 www.electrolux.com

This appliance is intended to be used in household and similar applications such as:

– staff kitchen areas in shops, offices and other working environments;

– by clients in hotels, motels, bed & breakfast and other residential type environments; areas for communal use in blocks of flats or in launderettes.

Do not exceed the maximum load of 7 kg (refer to the

"Programme chart" chapter).

The operating water pressure at the water entry point from the outlet connection must be between 0.5 bar

(0.05 MPa) and 8 bar (0.8 MPa).

The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering.

The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.

Old hose sets must not be reused.

If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised

Service Centre or similarly qualified persons to avoid an electrical hazard.

Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

Do not use high pressure water sprays and/or steam to clean the appliance.

Clean the appliance with a moist cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

2. SAFETY INSTRUCTIONS

2.1 Installation

The installation must comply with relevant national regulations.

• Remove all the packaging and the transit bolts including rubber bush with plastic spacer.

• Keep the transit bolts in a safe place.

If the appliance is to be moved in the future they must be reattached to lock

the drum to prevent an internal damage.

• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.

• Follow the installation instructions supplied with the appliance.

• Do not install or use a damaged appliance.

• Do not install or use the appliance where the temperature can be less than 0°C or where it is exposed to the weather.

• The floor area on which the appliance is to be installed must be flat, stable, heat resistant and clean.

• Make sure that there is air circulation between the appliance and the floor.

• When the appliance is in its permanent position, check if it is levelled correctly with the aid of a spirit level. If it is not, adjust the feet accordingly.

• Do not install the appliance directly above a floor drain.

• Do not spray water on the appliance and do not expose it to excessive humidity.

• Do not install the appliance where the appliance door cannot be fully opened.

• Do not put a closed container to collect possible water leakage under the appliance. Contact the Authorised

Service Centre to ensure which accessories can be used.

2.2 Electrical connection

WARNING!

Risk of fire and electric shock.

• The appliance must be earthed.

• Always use a correctly installed shockproof socket.

• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.

• Do not use multi-plug adapters and extension cables.

• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to

ENGLISH be replaced, this must be carried out by our Authorised Service Centre.

• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.

• Do not touch the mains cable or the mains plug with wet hands.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

5

2.3 Water connection

• Do not cause damage to the water hoses.

• Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.

• Ensure that there are no visible water leaks during and after the first use of the appliance.

• Do not use an extension hose if the inlet hose is too short. Contact the

Authorised Service Centre for the replacement of the inlet hose.

• When unpacking the appliance, It is possible to see water flowing from the drain hose. This is due to the testing of the appliance with the use of water in the factory.

• You can extend the drain hose to maximum 400 cm. Contact the

Authorised Service Centre for the other drain hose and the extension.

• Make sure that there is access to the tap after the installation.

2.4 Use

WARNING!

Risk of injury, electric shock, fire, burns or damage to the appliance.

• Follow the safety instructions on the detergent packaging.

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

• Do not wash fabrics which are heavily soiled with oil, grease or other greasy

6 www.electrolux.com

substances. It can damage rubber parts of the washing machine.

Prewash such fabrics by hand before loading them into the washing machine.

• Do not touch the glass door while a programme operates. The glass can get hot.

• Make sure that all metal objects are removed from the laundry.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre.

• Use original spare parts only.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Unpacking

1. Remove the external film. If necessary, use a cutter.

• Disconnect the appliance from the mains electrical and water supplies.

• Cut off the mains electrical cable close to the appliance and dispose of it.

• Remove the door catch to prevent children or pets from becoming trapped in the drum.

• Dispose of the appliance in accordance with local requirements for the disposal of Waste Electrical and Electronic Equipment (WEEE).

3. Open the door. Remove all the items from the drum.

2. Remove the cardboard top and the polystyrene packaging materials.

ntage weis

in de or Beg allat

Inst

Mon nwei en S ie vo in de formati e Use r Man

Achtu ageanw arning allation

Instruc n Sie r Geb nweis tallation

Mon

safe lation truct ation in th e User en S nwei

in de or Be

safe lation struct

in th e Use r Gebr anwe lation anwe lation

4. Put the front polystyrene packaging element on the floor behind the appliance. Carefully put down the appliance onto its rear side.

ENGLISH 7

2

1

5. Remove the polystyrene protection from the bottom.

8. Put the plastic caps, that you find in the user manual bag, in the holes.

1

2

6. Put the appliance back into an upright position. Remove the power supply cable and the drain hose from the hose holder.

We recommend that you keep the packaging and the transit bolts for any transport of the appliance.

3.2 Positioning and levelling

Adjust the appliance correctly to prevent vibration, noise and movement of the appliance when it operates.

WARNING!

It is possible to see water flowing from the drain hose. This is because the washing machine has been tested at the factory.

7. Remove the four transit bolts and pull out the plastic spacers.

x4

1. Install the appliance on a flat hard floor. The appliance must be levelled

8 www.electrolux.com

and stable. Make sure that the appliance does not touch the wall or other units and there is air circulation below the appliance.

2. Loosen or tighten the feet to adjust the level. All feet must rest firmly on the floor.

WARNING!

Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level.

3.3 The inlet hose

1. Connect the water inlet hose to the back of the appliance.

2. Position it toward left or right depending on the position of the water tap.

CAUTION!

Make sure that there are no leaks from the couplings.

Do not use an extension hose if the inlet hose is too short. Contact the service centre for the replacement of the inlet hose.

3.4 Water-stop device

The inlet hose has a water stop device.

This device prevents water leaks in the hose because of its natural ageing.

The red sector in the window «A» shows this fault.

Make sure that the inlet hose is not in vertical position.

3. If necessary, loose the ring nut to set it in the correct position.

4. Connect the water inlet hose to the cold water tap with 3/4" thread.

A

If this occurs, close the water tap and contact the authorized service centre to replace the hose.

3.5 Water drainage

The drain hose should stay at a height of no less than 600 mm and not more than

1000 mm.

You can extend the drain hose to maximum 4000 mm.

Contact the authorised service centre for the other drain hose and the extension.

It is possible to connect the drain hose in different ways:

1. Make a U shape with the drain hose and put it around the plastic hose guide.

ENGLISH drain pipe. Refer to the illustration.

9

2. On the edge of a sink - Fasten the guide to the water tap or to the wall.

The end of the drain hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 38 mm - min.

1.5") must be larger than the external diameter of the drain hose.

5. Without the plastic hose guide, to a sink spigot- Put the drain hose in the spigot and tighten it with a clamp.

Refer to the illustration.

Make sure that the plastic guide cannot move when the appliance drains and the drain hose end is not immersed in the water.

There may be a return of dirty water into the appliance.

3. If the end of the drain hose looks like this (see the picture), you can push it directly into the stand pipe.

Make sure that the drain hose makes a loop to prevent particles going into the appliance from the sink.

6. Position the hose directly to a built-in drain pipe in the room wall and tighten it with a clamp.

4. To a stand pipe with vent-hole -

Insert the drain hose directly into a

10 www.electrolux.com

4. ACCESSORIES

4.1 Available in www.electrolux.com/shop or from authorised dealer

Only appropriate accessories approved by

ELECTROLUX ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated.

5. PRODUCT DESCRIPTION

5.1 Special features

Your new washing machine meets all modern requirements for an effective treatment of laundry with low water, energy and detergent consumption and proper care of fabric.

• The ProSense technology adjusts automatically the programme duration

5.2 Appliance overview

1 2 3

4.2 Fixing plate kit

If you install the appliance on a plinth, secure the appliance with the fixing plates.

Read carefully the instructions supplied with the accessory.

to the laundry in the drum to achieve perfect washing results in the minimum possible time.

• Thanks to the Soft Plus option, the fabric softener is uniformly spread out in the laundry and deeply penetrates the fabric fibres favouring a perfect softness.

8 9

1 Worktop

2 Detergent dispenser

3 Control panel

4 Door handle

4

5

6

10

7

5 Rating plate

6 Drain pump filter

7 Feet for levelling the appliance

8 Drain hose

11

12

9 Inlet hose connection

10 Mains cable

11 Transit bolts

6. CONTROL PANEL

6.1 Control panel description

1

12 Hose support

2 3

ENGLISH 11

4

5

12 11 10 9 8 7 6

1 Programme dial

2 Display

3

Eco touch button

4

Time Save touch button

5

Rinse touch button

• Extra rinse option

• Skipping wash phase - Rinse only

6

7

Start/Pause touch button

Stains/Prewash touch button

• Stains option

10

• Prewash option

8

Delay Start touch button

9 Soft Plus touch button

Spin touch button

• Skipping phases - Only Drain

• Skipping phases - Only Spin

11

Temperature touch button

12

On/Off push button

12 www.electrolux.com

6.2 Display

Maximum load indicator. The icon flashes during programme time estimation (refer to "PROSENSE load detection" paragraph).

Delay start indicator.

Door locked indicator.

The digital indicator can show:

• Programme duration (e. g.

• Delay time (e. g. or ).

• Cycle end ( ).

• Alarm code (e.g. ).

).

Energy saving indicators. The indicator appears by selecting a programme for cotton at 40 °C or 60 °C.

Washing phase indicator: it flashes during prewash and wash phase.

Rinsing phase indicator: it flashes during rinse phase.

The indicator appears when the Soft Plus option is activated.

Spin and drain phase indicator. It flashes during spin and drain phase.

Child safety lock indicator.

Time saving indicator.

Temperature indicator. The indicator appears when a cold wash is set.

Spin speed indicator.

Rinse hold indicator.

ENGLISH 13

Extra Silent indicator.

7. DIAL AND BUTTONS

7.1 On/Off

Pressing this button for a few seconds allows to activate or deactivate the appliance. Two different tunes sound while switching the appliance on or off.

As the Stand-by function automatically deactivates the appliance to decrease the energy consumption in a few cases, you may need to activate the appliance again.

For more details, refer to Stand-by paragraph in Daily Use chapter.

7.2 Introduction

The options/functions are not selectable with all washing programmes.

Check the compatibility between options/functions and washing programmes in the "Programme Chart". An option/function can exclude another one, in this case the appliance doesn't allow you to set the incompatible options/functions together.

Make sure the screen and touch buttons are always clean and dry.

7.3 Temperature

When you select a washing programme, the appliance automatically proposes a default temperature.

Touch this button repeatedly until the desired temperature value appears on the display.

When the display shows the indicators

and the water.

, the appliance does not heat

7.4 Spin

When you set a programme, the appliance automatically sets the maximum spin speed allowed.

Touch repeatedly this button to:

Decrease the spin speed.

The display shows only the spin speeds available for the set programme.

Activate the Rinse Hold option.

The final spin is not performed. The water of the last rinse is not drained out to prevent the fabrics from creasing. The washing programme ends with water in the drum.

The display shows the indicator .

The door stays locked and the drum turns regularly to reduce creasing.

You must drain the water to unlock the door.

If you touch the Start/Pause button, the appliance performs the spinning phase and drains the water.

The appliance empties the water out automatically after 18 hours approximately.

Activate the Extra Silent option.

The intermediate and the final spinning phases are suppressed and the programme ends with water in the drum. This helps to reduce creasing.

The display shows the indicator .

The door stays locked. The drum turns regularly to reduce creasing.

You must drain the water to unlock the door.

As the programme is very quiet, it is suitable for use at night time when cheaper electricity tariffs are available. In some programmes the rinses are performed with more water.

If you touch the Start/Pause button, the appliance performs the only draining phase.

14 www.electrolux.com

The appliance empties the water out automatically after 18 hours approximately.

Activate the drain-only option

(Skipping the wash, rinse and spin

phases): Only Drain.

The appliance performs the only draining phase of the selected washing programme.

The display shows the indicator

(cold), and the indicator spin) and the indicator .

Activate the spin-only option

(Skipping the wash and rinse

phases): Only Spin.

(no

Before setting this option, select a suitable washing programme for the garments. The appliance will performs the most fitting spin cycle for your garments care (e.g. For synthetics items, first select the Synthetics washing programme and then the Only Spin option).

The appliance performs only the spinning phase of the selected washing programme.

The display shows the indicator

(cold), the phase indicator and the spin speed.

7.5 Stains/Prewash

Press this button repeatedly to activate one of the two options.

The relevant indicator goes on in the display.

Stains

Select this option to add an anti-stain phase to a programme in order to treat heavily soiled or stained laundry with stain remover.

Pour the stain remover into compartment . The stain remover will be added in the appropriate phase of the washing programme.

This option is not available with a temperature lower than

40 °C.

Prewash

Use this option to add a pre-wash phase at 30 °C before the washing phase.

This option is recommended for heavily soiled laundry, especially if containing sand, dust , mud and other solid particles.

The options can increase the programme duration.

7.6 Soft Plus

Set the Soft Plus option to ensures perfect distribution of the fabric softener and improves the fabric softness.

This option increases slightly the programme duration.

7.7 Delay Start

With this option you can delay the start of a programme in a more convenient time.

Touch the button repeatedly to set the required delay. The time increases by steps of 30 minutes up to 90' and from 2 hours up to 20 h.

After touching the Start/Pause button, the display shows the indicator and the selected delay time and the appliance begins the countdown.

7.8 Rinse

With this button you can select one of the following options:

• Extra rinse option

This option adds a few rinses according to the selected washing programme.

Use this option for persons allergic to detergent residues and in areas where the water is soft.

This option increases slightly the programme duration.

• Skipping wash phase - Rinse only option

The appliance performs only the rinsing phase, the spinning and the draining phases of the selected programme.

The corresponding indicator above the touch button illuminates.

7.9 Time Save

With this option you can decrease the programme duration.

• If your laundry is normally or lightly soiled, it may be advisable to shorten the washing programme. Touch this button once to decrease the duration.

• In case of smaller load, touch this button twice to set an extra quick programme.

The display shows the indicator .

ENGLISH

Water and energy consumption may depend on different causes, such as water pressure, its hardness and temperature, ambient temperature, type and quantity of laundry, the set options, spin speed and voltage fluctuations in the electricity network. The display shows the indicator .

15

If you select the Cotton programme at 40°C or 60°C and no other options are set, the display shows the indicator ; these are the standard cotton programmes, the most efficient programmes in terms of combined energy and water consumption.

7.10 Eco

The Eco option reduces the energy consumption maintaining good washing results.

Set this option for slightly or normally soiled items washed at 30°C or higher temperatures.

8. PROGRAMMES

7.11 Start/Pause

Touch the Start/Pause button to start, pause the appliance or interrupt a running programme.

8.1 Programme Chart

Washing programmes

Programme Programme description

Washing programmes

16 www.electrolux.com

Programme

Cottons

Synthetics

Delicates

Wool/Silk

Anti-Allergy Vapour

20 min - 3 kg

Easy Iron

Downing Jackets

Programme description

White cotton and coloured cotton. Normal, heavy and light soil.

Standard programmes for the Energy Label consump‐

tion values. According to regulation 1061/2010, the pro‐ gramme Cottons at 60 °C and the programme Cottons at

40 °C with the option are respectively the «Standard

60°C cotton programme» and the «Standard 40°C cotton programme». They are the most efficient programmes in terms of combined energy and water consumption for washing normally soiled cotton laundry.

The water temperature of the washing phase may differ from the temperature declared for the selected programme.

Synthetic items or mixed fabric items. Normal soil.

Delicate fabrics such as acrylics, viscose and mixed

fabrics requiring gentler washing. Normal soil.

Machine washable wool, hand washable wool and oth‐

er fabrics with «hand washing» care symbol1).

White cotton items. This programme removes micro-or‐ ganisms thanks to a washing phase with the temperature maintained above 60°C for some minutes. This helps in re‐ moving germs, bacteria, micro-organism and particles. The addition of vapour together with an additional rinsing phase ensures a proper removal of detergent residues and pol‐ lens/allergenic items, making it suitable for delicate and sensitive skins .

Cotton and synthetic items lightly soiled or once worn.

Synthetic items requiring a gentle wash. Normal and light soil.2)

Special programme for one down jackets, synthetic blan‐

ket, duvet, bedspread and so on.

ENGLISH 17

Programme

Outdoor

Programme description

Do not use fabric softener and make sure that there is no softener residue in the detergent dispenser.

Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable

fleece or inner insulation. The recommended laundry load is 2 kg.

This programme can also be used as water-repellent re‐ storing cycle, specifically tailored for treating clothes with a hydrophobic coating. To perform the water-repellent restor‐ ing cycle, proceed as follows:

• Pour the washing detergent in the compartment .

• Pour a special water-repellent restorer for fabric in the drawer compartment for fabric softener .

• Reduce the laundry load to 1 kg.

To further improve the water-repellent restor‐ ing action, dry the laundry in a tumble dryer by setting the Outdoor drying programme (if avail‐ able and if the garment care label permits tum‐ ble drying).

Denim

Denim clothing and jersey items. Normal soil. This pro‐ gramme performs a gentle rinsing phase, designed for den‐ im, that reduces fading and does not cause washing pow‐ der residues on the fibres.

1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't rotate or doesn't rotate properly, but this is normal for this programme.

2) To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin phase. The appliance adds some rinses.

Programme temperature, maximum spin speed and maximum load

Programme Default temper‐ ature

Temperature range

Reference spin speed

Spin speed range

Maximum load

Washing programmes

Cottons

40 °C

95 °C - Cold

1200 rpm

1200 rpm - 400 rpm

7 kg

Synthetics

40 °C

60 °C - Cold

1200 rpm

1200 rpm - 400 rpm

3 kg

Delicates

30 °C

40 °C - Cold

1200 rpm

1200 rpm - 400 rpm

1,5 kg

18 www.electrolux.com

Programme

Wool/Silk

Anti-Allergy Vapour

20 min - 3 kg

Easy Iron

Default temper‐ ature

Temperature range

40 °C

40 °C - Cold

Reference spin speed

Spin speed range

1200 rpm

1200 rpm - 400 rpm

60 °C

30 °C

40 °C - 30 °C

40 °C

60 °C - Cold

40 °C

60 °C - Cold

1200 rpm

1200 rpm - 400 rpm

1200 rpm

1200 rpm - 400 rpm

800 rpm

800 rpm - 400 rpm

800 rpm

800 rpm - 400 rpm Downing Jackets

Outdoor

30 °C

40 °C - Cold

1200 rpm

1200 rpm - 400 rpm

Denim

30 °C

40 °C - Cold

800 rpm

1200 rpm - 400 rpm

1) Washing programme.

2) Washing programme and waterproofing phase.

Programme options compatibility

Maximum load

1,5 kg

7 kg

1 kg

2 kg

2 kg

2 kg1)

1 kg2)

2 kg

Spin

Rinse Hold

Extra Silent

Only Drain

Only Spin1)

ENGLISH 19

Stains2) ■ ■ ■ ■ ■

Prewash ■ ■ ■ ■

Extra rinse ■ ■ ■ ■ ■ ■ ■

Rinse only

Eco

3)

■ ■ ■ ■ ■ ■ ■

Time Save4) ■ ■ ■ ■

Delay Start ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Soft Plus ■ ■ ■ ■ ■ ■

1) Before setting this option, select a suitable washing programme for the garments. The appliance will performs the most fitting spin cycle for your garments care (e.g. For synthetics items, first select the Synthetics washing programme and then the Only Spin option).

2) This option is not available with temperature lower than 40 °C.

3) This option is not available with a temperature lower than 30 °C.

4) If you set the shortest duration, we recommend that you decrease the load size. It is pos‐ sible to fully load the appliance, however the washing results can be less satisfactory.

8.2 Woolmark Apparel Care - Blue

The wool wash cycle of this machine has been approved by The Woolmark Compa‐ ny for the washing of wool garments label‐ led as «hand wash» provided that the gar‐ ments are washed according to the instruc‐ tions issued by the manufacturer of this washing machine. Follow the garment care label for drying and other laundry instruc‐ tions. M1460

The Woolmark symbol is a Certification mark in many countries.

20 www.electrolux.com

9. SETTINGS

9.1 Introduction

When pressing a key combination, do not tilt your fingers downwards . The sensors of the underneath buttons are sensitive and may interfere with Your choice.

9.2 Child Lock

With this option you can prevent that the children play with the control panel.

• To activate/deactivate this option, touch the and the buttons simultaneously until the indicator

comes on/goes off on the display.

You can activate this option:

• After you touch the Start/Pause button: all the buttons and the programme dial are deactivated

(except On/Off button ).

• Before you touch the Start/Pause button: the appliance cannot start.

The appliance keeps the selection of this option after you switch it off.

9.3 Acoustic signals

This appliance is provided with different acoustic signals, that operate when:

• You activate the appliance (special short tune).

10. BEFORE FIRST USE

1. Make sure that the electrical power is available and the water tap is open.

2. Pour 2 litres of water into the detergent compartment marked as 2.

This action activates the drain system.

3. Pour a small quantity of detergent into the compartment marked as 2.

11. DAILY USE

WARNING!

Refer to Safety chapters.

• You deactivate the appliance (special short tune).

• You touch the buttons (click sound).

• You make a wrong selection (3 short sounds).

• The programme is completed

(sequence of sounds for about 2 minutes).

• The appliance has a malfunction

(sequence of short sounds for about 5 minutes).

To deactivate/activate the acoustic signals when the programme is completed, touch the and the buttons simultaneously for about 6 seconds.

If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction.

9.4 Permanent Extra Rinse

With this option you can permanently have an extra rinse when you set a new programme.

• To activate/deactivate this option touch the button and the button simultaneously until the indicator of the Extra rinse button

comes on/goes off.

4. Set and start a programme for cotton at the highest temperature without any laundry in the drum.

This removes all possible dirt from the drum and the tub.

11.1 Activating the appliance

1. Connect the mains plug to the mains socket.

ENGLISH 21

2. Open the water tap.

3. Press the On/Off button for a few seconds to activate the appliance.

A short tune sounds (if activated). The programme dial is automatically set on

Cotton programme .

The display shows the maximum load, the default temperature, the maximum spin speed, the indicators of the phases making up the programme and the cycle duration.

11.2 Loading the laundry

1. Open the appliance door.

2. Shake the items before you put them in the appliance.

3. Put the laundry in the drum, one item at a time.

Make sure not to put too much laundry in the drum.

4. Close the door firmly.

CAUTION!

Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry.

11.3 Using detergent and additives

1. Measure out the detergent and the fabric conditioner.

2. Put the detergent and the fabric conditioner into the compartments.

3. Carefully close the detergent drawer

2 1

CAUTION!

Use only specified detergents for washing machine.

Always obey the instructions that you find on the packaging of the detergent products.

1

2

Detergent compartment for prewash phase or soak pro‐ gramme (if available). Add the detergent for prewash and soak before the start of the programme.

Detergent compartment for washing phase. If you use a liquid detergent, put it immedi‐ ately before you start the pro‐ gramme.

Compartment for liquid addi‐ tives (fabric conditioner, starch). Put the product in the compartment before you start the programme.

After a washing cycle, if necessary, remove any detergent residue from the detergent dispenser.

11.4 Changing position of detergent divider

1. Pull out the detergent dispenser. The position A of the detergent divider is for powder detergent (factory setting).

22 www.electrolux.com

4. Measure out the detergent and the fabric conditioner and carefully close the detergent dispenser.

A

2

MAX

1

2. To use also liquid detergent/

additive or bleach: Remove detergent divider from the position A and insert it in position B.

B

C

2

The position B of the detergent divider is for powder detergent in the rear compartment and for liquid detergent/additive or bleach in the front compartment.

3. To use only liquid detergent: Insert the detergent divider in position C.

2

MAX

MAX

1

1

• Do not use gelatinous or thick liquid detergents.

• Do not exceed the maximum dose of liquid detergent.

• Do not set the prewash phase.

• Do not set the delay start function.

Make sure that the detergent divider is inserted properly and does not cause a blockage when you close the drawer.

11.5 Setting a programme

1. Turn the programme dial to select the desired washing programme. The related programme indicator comes on.

The indicator of the Start/Pause button flashes.

The display shows the maximum declared load for the programme, the default temperature, the maximum spin speed, the washing phase indicators

(when available) and an indicative programme duration.

2. To change the temperature and/or the spin speed, touch the related buttons.

3. If desired, set one or more options by touching the related buttons. The related indicators come on in the display and the given information changes accordingly.

In case a selection is not

possible, no indicator comes on and an acoustic signal sounds.

11.6 Starting a programme

Touch the Start/Pause button to start the programme.

The related indicator stops flashing and stays on.

In the display, the indicator of the operating phase starts flashing.

The programme starts, the door is locked. The display shows the indicator

.

The drain pump can operate shortly before the appliance fills water.

11.7 Starting a programme with the delay start

1. Touch the Delay Start button repeatedly until the display shows the desired delay time. The indicator comes on.

2. Touch the Start/Pause button.

The appliance starts the countdown of the delay start.

When the countdown is completed, the programme starts.

The PROSENSE adapts starts at the end of the countdown.

Cancelling the delay start after the countdown has started

To cancel the delay start:

1. Touch the Start/Pause button to pause the appliance. The related indicator flashes.

2. Touch the Delay Start button repeatedly until the display shows .

3. Touch the Start/Pause button again to start the programme immediately.

Changing the delay start after the countdown has started

To change the delay start:

1. Touch the Start/Pause button to pause the appliance. The related indicator flashes.

2. Touch the Delay Start button repeatedly until the display shows the desired delay time.

3. Touch the Start/Pause button again to start the new countdown.

ENGLISH

11.8 The ProSense load detection

23

After touching the Start/Pause button:

1. The indicator flashes.

2. The ProSense starts the laundry load detection to calculate the real programme duration. The indicator

and the time dots flash.

3. After about 15 minutes the display shows the new programme duration: the indicator goes off and the time dots stops flashing.

The appliance adjusts automatically the programme duration to the load to achieve perfect washing results in the minimum possible time. The programme duration could increase or decrease.

The ProSense detection is carried out with complete washing programmes only

(no skipping phase selected).

11.9 Programme phase indicators

When the programme starts the indicator of the running phase flashes and the other phase indicators are steady on.

E.g. the washing or pre wash phase is running: .

When the phase ends the relevant indicator stops flashing and is steady on.

The next phase indicator starts flashing.

E.g. the rinse phase is running: .

11.10 Interrupting a programme and changing the options

When the programme is running, you can change only some options:

1. Touch the button Start/Pause.

The related indicator flashes.

2. Change the options. The given information in the display changes accordingly.

24 www.electrolux.com

3. Touch the button Start/Pause again.

The washing programme continues.

11.11 Cancelling a running programme

1. Press the button On/Off to cancel the programme and to deactivate the appliance.

2. Press the button On/Off again to activate the appliance.

Now, you can set a new washing programme.

If the ProSense phase is already carried out and the water filling is already started, the new programme starts without repeating the

ProSense phase. The water and the detergent are not drained out in order to avoid waste.

11.12 Opening the door -

Adding garments

While a programme or the delay start operates, the appliance door is locked.

If the temperature and level of the water in the drum are too high and/or the drum still rotates you cannot open the door.

1. Touch the button Start/Pause.

In the display the related door lock indicator goes off.

2. Open the appliance door. If necessary, add or remove the items.

3. Close the door and touch the button

Start/Pause.

The programme or the delay start continues.

11.13 End of the programme

When the programme has finished, the appliance stops automatically. The acoustic signals operate (if they are active).

In the display all washing phase indicators become steady and the time area shows .

The indicator of the Start/Pause button goes off.

The door unlocks and the indicator goes off.

1. Press the On/Off button to deactivate the appliance.

After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance.

When you activate the appliance again, the display show the end of the last selected programme. Turn the programme dial to set a new cycle.

2. Remove the laundry from the appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent dispenser slightly ajar to prevent mildew and odours.

5. Close the water tap.

11.14 Draining water out after end of cycle

If you have chosen a programme or an option that does not empty out the water of the last rinse, the programme is completed, but:

• The display shows the indicator , the option indicator or and the door locked indicator . The indicator of the running phase flashes.

• The drum still turns at regular intervals to prevent the creases in the laundry.

• The door stays locked.

• You must drain the water to open the door:

1. If necessary, touch the Spin button to decrease the spin speed proposed by the appliance.

2. Touch the Start/Pause button:

• If you have set , the appliance drains the water and spins.

• If you have set , the appliance only drains the water.

The option indicator or goes out, while the indicator flashes and then goes off.

3. When the programme is completed and the door locked indicator goes off, you can open the door.

4. Press the On/Off button a few seconds to deactivate the appliance.

In any case, the appliance empties the water out automatically after approximately 18 hours.

11.15 Stand-by option

The Stand-by function automatically deactivates the appliance to decrease the energy consumption when:

12. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

12.1 The laundry load

• Divide the laundry into: white, coloured, synthetics, delicates and wool.

• Follow the washing instructions on the laundry care labels.

• Do not wash white and coloured items together.

• Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first couple of times.

• Turn multilayered fabrics, wool and items with printed illustrations inside out.

• Pre-treat tough stains.

• Wash heavy soil stains with a special detergent.

• Be careful with curtains. Remove the hooks and put the curtains in a washing bag or pillowcase.

• Do not wash laundry without hems or with cuts. Use a washing bag to wash

ENGLISH 25

• You do not use the appliance for 5 minutes before you touch the Start/

Pause button.

Press the button On/Off to activate the appliance again.

• After 5 minutes from the end of the washing programme

Press the On/Off button to activate the appliance again.

The display shows the end of the last set programme.

Turn the programme dial to set a new cycle.

If you set a programme or an option that ends with water in the drum, the Stand-by function doesn't deactivate the appliance to remind you to drain the water.

small and/or delicate items (e.g.

underwired bras, belts, tights, shoelaces, ribbons, etc. ).

• A very small load can cause balance problems with the spin phase leading to excessive vibration. If this occurs:

a. interrupt the programme and open the door (refer to "Daily

Use" chapter);

b. manually redistribute the load so that the items are spaced evenly around the tub;

c. press the Start/Pause button.

The spin phase continues.

• Button up pillowcases, close zippers, hooks and poppers. Tie up belts, cords, shoelaces, ribbons and any other loose elements.

• Empty pockets and unfold the items.

26 www.electrolux.com

12.2 Stubborn stains

For some stains, water and detergent is not sufficient.

We recommend that you pre-treat these stains before you put the items in the appliance.

Special stain removers are available.

Use the special stain remover that is applicable to the type of stain and fabric.

12.3 Detergents and other treatments

• Only use detergents and other treatments specially made for washing machines:

– powder detergents for all types of fabric, excluding delicate. Prefer powder detergents containing bleach for whites and laundry sanitization

– liquid detergents, preferably for low temperature wash programmes (60 °C max) for all types of fabric, or special ones for woollens only.

• Do not mix different types of detergents.

• To help the environment, do not use more than the recommended quantity of detergent.

• Follow the instructions that you find on packaging of the detergents or other treatments without exceeding the indicated maximum level ( ).

13. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

13.1 External cleaning

Clean the appliance with mild soap and warm water only. Fully dry all the surfaces.

CAUTION!

Do not use alcohol, solvents or chemical products.

• Use the recommended detergents for the type and colour of the fabric, the programme temperature and the level of soil.

12.4 Ecological hints

• Set a programme without the prewash phase to wash laundry with normal soil.

• Always start a washing programme with the maximum load of laundry allowed.

• If you pre-treat the stains or use a stain remover, set a programme with a low temperature.

• To use the correct quantity of detergent, check the water hardness of your domestic system. Refer to

"Water hardness".

12.5 Water hardness

If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a water softener.

To find out the water hardness in your area, contact your local water authority.

Use the correct quantity of water softener. Follow the instructions that you find on the packaging of the product.

CAUTION!

Do not clean the metal surfaces with chlorine-based detergent.

13.2 Descaling

If the water hardness in your area is high or moderate, we recommend that you use a water descaling product for washing machines.

Regularly examine the drum to check any limescale.

The regular detergents already contain water softening agents, but we recommend to run a cycle with empty drum and a descaling product occasionally.

Always follow the instructions that you find on the packaging of the product.

13.3 Maintenance wash

The repeated and prolonged use of low temperature programmes can cause detergent deposits, fluff residues, bacterial growth inside the drum and the tub. This could generate bad odours and mildew.

To eliminate these deposits and hygienize the inner part of the appliance, run a maintenance wash regularly (at least once a month):

1. Remove all laundry from the drum.

2. Run a cotton programme with the highest temperature with a small quantity of powder detergent.

13.4 Door seal

ENGLISH 27

Always follow the instructions that you find on the packaging of the product.

Do not clean the drum with acidic descaling products, scouring products containing chlorine or iron or steel.

For a thorough clean:

1. Clean the drum with special products for stainless steel.

Always follow the instructions that you find on the packaging of the product.

2. Run a short cotton programme at high temperature with empty drum and with a small quantity of powder detergent or, if available, run the

Machine Clean programme.

13.6 Cleaning the detergent dispenser

To prevent possible deposits of dried detergent or clotted fabric softener and/or formation of mould in the detergent dispenser drawer, once in a while carry out the following cleaning procedure:

1. Open the drawer. Press the catch downwards as indicated in the picture and pull it out.

Regularly examine the seal and remove all objects from the inner part.

13.5 Cleaning the drum

Regularly examine the drum to prevent unwanted deposits.

Rust deposits in the drum may occur due to rusting foreign body in the washing or tap water containing iron.

Clean the drum with special products for stainless steel.

2. Remove the top part of the additive compartment to aid cleaning and flush it out under running warm water, to remove any traces of accumulated detergent. After cleaning, replace the top part in its position.

28 www.electrolux.com

3. Make sure that all detergent residue is removed from the upper and lower part of the recess. Use a small brush to clean the recess.

4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum.

13.7 Cleaning the drain pump

Regularly check the drain pump filter and make sure that it is clean.

Clean the drain pump if:

• The appliance does not drain the water.

• The drum does not turn.

• The appliance makes an unusual noise because of the blockage of the drain pump.

• The display shows the alarm code

WARNING!

• Disconnect the mains plug from the mains socket.

• Do not remove the filter while the appliance operates.

• Do not clean the pump if the water in the appliance is hot. Wait until the water cools down .

• Repeat Step 3 several times by closing and opening the valve until the water stops flowing out.

Always keep a rag nearby to dry up any water spillages when removing the filter.

Proceed as follows to clean the pump:

1.

2.

3.

5.

1

2

4.

6.

7.

8.

ENGLISH 29

30 www.electrolux.com

2

1

9.

10.

WARNING!

Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages.

When you drain the water with the emergency drain procedure, you must activate the drain system again:

1. Put 2 litres of water in the main wash compartment of the detergent dispenser.

2. Start the programme to drain the water.

13.8 Cleaning the inlet hose and the valve filter

It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time:

1. Remove the inlet hose from the tap and clean the filter.

1

3. Clean the valve filter on the back of the appliance with a toothbrush.

2

3

2. Remove the inlet hose from the appliance by loosening the ring nut.

4. When you reconnect the hose to the back of the appliance, turn it left or right (not in vertical position) depending on the position of your water tap.

20°

45°

13.9 Emergency drain

If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain filter' paragraph. If necessary, clean the pump.

When you drain the water with the emergency drain procedure, you must activate the drain system again:

1. Put 2 litres of water in the main wash compartment of the detergent dispenser.

2. Start the programme to drain the water.

14. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

14.1 Introduction

The appliance does not start or it stops during operation.

First try to find a solution to the problem

(refer to the table). If the problem persists, contact the Authorised Service

Centre.

In case of major problems, the acoustic signals operate, the display

shows an alarm code and the Start/

Pause button may flash continuously:

- The appliance does not fill with water properly.

Start the appliance again by pressing

Start/Pause button. After 5 seconds the door will be unlocked.

- The appliance does not drain the water.

ENGLISH

13.10 Frost precautions

31

If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump.

1. Disconnect the mains plug from the mains socket.

2. Close the water tap.

3. Put the two ends of the inlet hose in a container and let the water flow out of the hose.

4. Empty the drain pump. Refer to the emergency drain procedure.

5. When the drain pump is empty, install the inlet hose again.

WARNING!

Make sure that the temperature is higher than 0

°C before you use the appliance again.

The manufacturer is not responsible for damages caused by low temperatures.

• - The appliance door is open or not closed correctly. Please check the door!

If the appliance is overloaded, remove some items from the drum and/or keep pressed the door while touching the Start/Pause button until the indicator

stops flashing (see the picture below).

32 www.electrolux.com

• - No communication between electronic elements of the appliance.

Switch it off and switch on again.

The programme was not finished properly or the appliance stopped too early. If the alarm code appears again, contact the Authorised Service

Centre.

WARNING!

Deactivate the appliance before carrying out any check.

• - The mains supply is unstable.

Wait until the mains supply is stable.

14.2 Possible failures

Problem

The programme does

The appliance fills with water and drains imme‐ diately not start.

The appliance does not fill with water properly.

Possible solution

• Make sure that the mains plug is connected to the mains socket.

• Make sure that the appliance door is closed.

• Make sure that there is no damaged fuse in the fuse box.

• Make sure that the Start/Pause has been touched.

• If the delay start is set, cancel the setting or wait for the end of countdown.

• Deactivate the Child Lock function if it is on.

• Check the position of the knob on the selected pro‐ gramme.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the inlet hose has no kinks, damages or bends.

• Make sure that the connection of the water inlet hose is correct.

• Make sure that the filter of the inlet hose and the filter of the valve are not clogged. Refer to 'Care and cleaning'.

• Make sure that the drain hose is in the correct position.

The hose may be positioned too low. Refer to "Installa‐ tion instruction".

ENGLISH 33

Problem

The appliance does not drain the water.

The spin phase does not operate or the washing cycle lasts lon‐ ger than usual.

There is water on the floor.

You cannot open the appliance door.

The appliance makes an unusual noise and vibrates.

The programme dura‐ tion increases or de‐ creases during pro‐ gramme execution.

The washing results are not satisfactory.

Possible solution

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to "Care and cleaning".

• Make sure that the connection of the drain hose is cor‐ rect.

• Set the drain programme if you set a programme with‐ out drain phase.

• Set the drain programme if you set an option which ends with water in the tub.

• Set the spin programme.

• Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to "Care and cleaning".

• Adjust manually the items in the tub and start the spin phase again. This problem may be caused by balance problems.

• Make sure that the couplings of the water hoses are tight and there is not water leakages.

• Make sure that the water inlet hose and the drain hose have no damages.

• Make sure you use the correct detergent and the correct quantity of it.

• Make sure that a washing programme that ends with water in tub, has been selected.

• Make sure that the washing programme is finished.

• Set the drain or the spin programme if there is water in the drum.

• Make sure that the appliance receives electrical power.

• This problem may be caused by a failure of the appli‐ ance. Contact the Authorised Service Centre.

• Make sure the levelling of the appliance is correct. Refer to "Installation instruction".

• Make sure that the packaging and/or the transit bolts are removed. Refer to "Installation instruction".

• Add more laundry in the drum. The load may be too small.

• The ProSense System is able to adjust the programme duration according to the type and the laundry load size.

Refer to "The ProSense System load detection" in "Daily

Use" chapter.

• Increase the detergent quantity or use a different deter‐ gent.

• Use special products to remove the stubborn stains be‐ fore you wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

34 www.electrolux.com

Problem

Too much foam in the drum during the wash‐ ing cycle.

After the washing cycle, there are some deter‐ gent residues in the dis‐ penser drawer.

Possible solution

• Reduce the quantity of detergent.

• Make sure that the detergent insert is in the correct po‐ sition.

• Make sure you have used the detergent dispenser ac‐ cording the indications given in this user manual.

After the check, activate the appliance. The programme continues from the point of interruption.

If the problem occurs again, contact the Authorised Service Centre.

If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre.

15. CONSUMPTION VALUES

Stated values are obtained in laboratory conditions with relevant stand‐ ards. Different causes can change the data: the quantity and type of laundry and ambient temperature. Water pressure, the supply voltage and the temperature of inlet water may also affect the washing pro‐ gramme duration.

Technical specifications may be changed without prior notice to improve the quality of product.

During the washing programme, the Prosense technology can vary the wash duration and the consumption values. For more details see 'The

Prosense load detection' paragraph in 'Daily Use' chapter.

Programmes Load

(kg)

Cottons 60°C

Cottons 40°C

Synthetics 40°C

Delicates 40°C

Wool/Silk 30°C

Standard cotton programmes

7

7

3

1,5

1,5

Energy con‐ sumption

(kWh)

Water con‐ sumption

(litre)

1,30

0,93

0,66

0,40

0,13

74

75

64

43

44

Approxi‐ mate pro‐ gramme duration

(minutes)

240

210

135

55

70

Remain‐ ing mois‐ ture (%)1)

53

53

35

35

30

ENGLISH 35

Programmes

Standard 60°C cotton

Standard 60°C cotton

Standard 40°C cotton

1) At the end of spin phase.

Load

(kg)

7

3,5

3,5

Energy con‐ sumption

(kWh)

Water con‐ sumption

(litre)

0,85 50

Approxi‐ mate pro‐ gramme duration

(minutes)

210

Remain‐ ing mois‐ ture (%)1)

53

0,64

0,54

40

40

180

175

53

53

Off Mode (W)

0.30

Left On Mode (W)

0.30

The information given in the chart above is compliant with the EU Commission regu‐ lation 1015/2010 implementing directive 2009/125/EC .

16. TECHNICAL DATA

Dimension Width/ Height/ Depth/

Total depth

Electrical connection Voltage

Overall power

Fuse

Frequency

595 mm / 850 mm / 450 mm / 490 mm

230 V

2200 W

10 A

50 Hz

Level of protection against ingress of solid parti‐ cles and moisture ensured by the protective cov‐ er, except where the low voltage equipment has no protection against moisture

Water supply pressure Minimum

Maximum

IPX4

0.5 bar (0.05 MPa)

8 bar (0.8 MPa)

Cold water

Water supply 1)

Maximum Load

Energy Efficiency Class

Cotton 7 kg

A+++

Spin Speed Maximum spin speed 1151 rpm

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

36 www.electrolux.com

17. QUICK GUIDE

17.1 Daily use

1

2

Connect the mains plug to the mains socket.

Open the water tap.

Load the laundry.

Pour the detergent and other treatment in the proper compartment of the detergent dispenser.

1. Push the On/Off button to turn on the appliance. Turn the programme dial to set the desired programme.

17.2 Cleaning the drain pump filter

2. Set the desired options by means of the corresponding touch buttons.

3. To start the programme, touch the

Start/Pause button.

At the end of the programme, remove the laundry.

1 2 3

1

2

Clean the filter regularly and, especially, if the alarm code display.

appears on the

17.3 Programmes

Programmes

Cottons

Synthetics

Load

7 kg

3 kg

Product description

White cotton and coloured cotton.

Synthetic items or mixed fabric items.

ENGLISH 37

Programmes

Delicates

Wool/Silk

Anti-Allergy Vapour

20 min - 3 kg

Easy Iron

Downing Jackets

Load

1,5 kg

1,5 kg

7 kg

1 kg

2 kg

2 kg

Product description

Delicate fabrics such as acrylics, viscose, polyester items.

Machine washable wool, hand washable wool and delicates.

White cotton items. This programme helps to remove germs and bacteria.

Synthetic and mixed fabric. Lightly soiled items and garments to freshen up.

Synthetic items requiring a gentle wash.

Single synthetic blanket, padded clothes, du‐ vets, down jackets.

Outdoor

2 kg 1)

1 kg 2)

Modern outdoor sporting garments.

Denim 2 kg Denim clothing and jersey items.

1) Washing programme.

2) Washing programme and waterproofing phase.

18. PRODUCT INFORMATION SHEET IN REFERENCE

TO E.U. REGULATION 1369/2017

Product Information Sheet

Trade Mark

Model

ELECTROLUX

WAGL6S300,

PNC914341155

7

A+++

Rated capacity in kg

Energy efficiency class

Energy consumption in kWh per year, based on 220 standard washing cycles for cotton programmes at 60

°C and 40 °C at full and partial load, and the con‐ sumption of the low-power modes. Actual energy con‐ sumption will depend on how the appliance is used.

Energy consumption of the standard 60°C cotton pro‐ gramme at full load in kWh

Energy consumption of the standard 60°C cotton pro‐ gramme at partial load in kWh

Energy consumption of the standard 40°C cotton pro‐ gramme at partial load kWh

157,0

0,85

0,64

0,54

38 www.electrolux.com

Power consumption of the off-mode in W

Power consumption in left-on mode in W

Water consumption in litres per year, based on 220 standard washing cycles for cotton programmes at 60

°C and 40 °C at full and partial load. Actual water con‐ sumption will depend on how the appliance is used.

Spin-drying efficiency class on a scale from G (least efficient) to A (most efficient)

Maximum spin speed in rpm

Remaining moisture content in %

The 'standard 60 °C cotton programme' and the

'standard 40 °C cotton programme' are the standard washing programmes to which the information in the label and the fiche relates, these programmes are suitable to clean normally soiled cotton laundry and they are the most efficient in terms of combined ener‐ gy and water consumption.

Programme time of the standard 60°C cotton pro‐ gramme at full load in minutes

Programme time of the standard 60°C cotton pro‐ gramme at partial load in minutes

Programme time of the "standard 40°C cotton pro‐ gramme at partial load in minutes

Duration of the left on mode in minutes

Airborne acoustical noise emission in db(A) washing

Airborne acoustical noise emission in db(A) spinning

Built in appliance Y/N

0,30

0,30

10499

B

1151

53

-

210

180

175

5

49

73

No

The information given in the chart above is compliant with the EU Commission regulation

1015/2010 implementing directive 2009/125/EC .

19.

CH

GUARANTEE

Customer Service Centres

Industriestrasse 10

5506 Mägenwil

Point of Service

Le Trési 6

1028 Préverenges

Via Violino 11

6928 Manno

ENGLISH 39

Point of Service

Morgenstrasse 131

3018 Bern

Langgasse 10

9008 St. Gallen

Seetalstrasse 11

6020 Emmenbrücke

Schlossstrasse 1

4133 Pratteln

Comercialstrasse 19

7000 Chur

Spare parts service Industriestrasse 10,

5506 Mägenwil, Tel. 0848 848 111

Specialist advice/Sale Badenerstrasse

587, 8048 Zürich, Tel. 044 405 81 11

Warranty For each product we provide a two-year guarantee from the date of purchase or delivery to the consumer

(with a guarantee certificate, invoice or sales receipt serving as proof). The

20. ENVIRONMENTAL CONCERNS

guarantee covers the costs of materials, labour and travel. The guarantee will lapse if the operating instructions and conditions of use are not adhered to, if the product is incorrectly installed, or in the event of damage caused by external influences, force majeure, intervention by third parties or the use of non-genuine components.

Recycle materials with the symbol .

Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

For Switzerland:

Where should you take your old equipment?

Anywhere that sells new equipment or hand it in to official SENS collection points or official SENS recycling firms.

The list of official SENS collection points can be found at www.erecycling.ch

*

www.electrolux.com/shop

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement