JOHN LEWIS JLBIWM1404 Quick start guide

JOHN LEWIS JLBIWM1404 Quick start guide
Quick User’s Guide
Before activating the appliance make sure
you have removed all packaging including
the transit bolts (refer to the Installation
Instructions in the User Manual).
Before you activate the appliance read
the ‘Safety’ chapters in the user manual.
For more information please always
refer to the User Manual.
Control Panel
1
11
1.
2.
3.
4.
5.
6.
Programme dial
Display
Delay start touch button
Reduce time touch button
Start/Pause touch button
Stain touch button
10
9
2
34
8
7
5
6
7. Extra soft touch button
8. Prewash touch button
9. Spin touch button
10. Temperature touch button
11. On/Off push button
The On/Off button with AUTO Stand-by function
The Stand-by function automatically deactivates the appliance to reduce energy consumption when:
1. You do not use the appliance for 5 minutes.
Press the button On/Off to activate the
appliance again.
2. The washing programme finished 5 minutes
ago. Once activate the appliance display
shows the end of the cycle.
Turn the programme dial to set a new cycle.
If the dial is rotated to the reset position ,
the appliance automatically turns off in
30 seconds.
Interactive Display
Door locked indicator and
Delay start indicator.
The time area can show:
Reset position
Programme duration
Delay time
Cycle end
Warning code
Reduce time indicator: level bars.
Anti-stain indicator.
Extra rinse indicator.
Indicator for adding garments.
Child lock indicator.
Machine clean indicator.
Anti-crease indicator.
Activating the appliance
Before you activate the appliance read the
Safety Information in the User Manual.
1. Press and hold the On/Off button
for a couple of seconds to activate or
deactivate the appliance. A tune sounds
when the appliance is activated.
2. Set the dial to a selected programme:
the indicator of the Start/Pause button
flashes slowly.
Setting a programme
3. If necessary, change the temperature and the
spin speed and add available options. When
you activate an option, the indicator of the
set option comes on.
4. Press the Start/Pause button to start the
programme.
Programmes
Programme
Temperature range
Programme description
(Type of load and soil level)
Cotton
90°C - Cold
White cotton and coloured cotton.
Normal soil and light soil.
Cotton Eco
60°C - 40°C
White cotton and colour-fast cotton.
Normal soil. The energy consumption decreases and cycle duration is
extended.
Synthetics
60°C - Cold
Delicates
40°C - Cold
Anti-allergy
60°C
Machine clean
60°C
Synthetic items or mixed fabric items.
Normal soil.
Spin/Drain
All fabrics, except woollens and delicate fabrics.
Rinse
All fabrics, except woollens and very delicate fabrics.
Duvet
60°C - Cold
14min wash
30°C
Sportswear
40°C - Cold
Outdoor
40°C - Cold
Delicate fabrics such as acrylics, viscose, polyester items.
Normal soil.
White cotton items. This helps remove germs and bacteria.
Maintenance cycle with hot water to clean and freshen the empty
drum and to remove residue that may cause odour.
Single synthetic blanket, bedspread, duvet.
Synthetic and mixed fabric.
Lightly soiled items and garments to freshen up.
Mixed fabric sportswear. Light soil items or items to refresh.
Modern sports clothes such as gym, cycling, jogging and similar
items. Waterproof, waterproof-breathable and water repellent fabrics.
Denim
40°C - Cold
Special programme for Denim clothing with delicate washing
phase to minimize colour fading and marks. For better care a reduced
load size is recommended.
Wool/Silk
40°C - Cold
Machine washable wool, hand washable wool and delicate fabrics
with <<hand washing>> care symbol.
The detergent dispenser
Detergent compartment for prewash,
soak programme or stain remover.
Detergent compartment for washing
phase.
Compartment for liquid additives.
Caution! Do not exceed
the Max level.
Flap for powder or liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid
detergents.
• Do not exceed the maximum level
indicated on the flap.
• Do not set the delay start.
Troubleshooting
Refer to Safety chapter in User
Manual.
Deactivate the appliance before
you do the checks.
First try to find solution to the problem. If the error
persists, contact the Authorised Service Centre.
If the appliance is overloaded, remove
some items from the drum and/or
hold the door shut and push the Start/
Pause button at the same time until the
indicator Door lock stops flashing.
To use powder detergent, turn the flap up.
To use liquid detergent, turn the flap
down.
The display can show alarm codes (refer to the
“Troubleshooting” table in the User Manual):
The appliance does not fill with water
properly.
The appliance does not drain the water.
The appliance door is open or not
closed correctly.
The mains supply is unstable.
Wait until the mains supply is stable.
No communication between electronic
elements of the appliance. Switch it off
and switch on again.
The anti-flood device is on. Disconnect the
appliance and close the water tap. Contact
the Authorised Service Centre.
Care and cleaning
Clean the appliance filter regularly.
Refer to ‘Care and Cleaning’
chapter in user manual.
157026110-B-062019
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement