IKEA MATMÄSSIG User Manual

IKEA MATMÄSSIG User Manual
GB
MATMÄSSIG
ENGLISH
Please refer to the last page of this manual for the full list of
IKEA appointed After Sales Service Provider and relative
national phone numbers.
ENGLISH
4
ENGLISH
4
Contents
Safety information
Safety instructions
Installation
Electrical connection
Product description
Daily use
Cookware guidance
4
6
8
9
11
13
15
Care and cleaning
Troubleshooting
Technical data
Energy efficiency
Environmental concerns
IKEA guarantee
16
17
19
19
20
20
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
if an incorrect installation and use causes injuries and
damage. Always keep the instructions with the appliance for
future reference.
Children and vulnerable people safety
•
•
•
•
•
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
Children between 3 and 8 years of age and persons with
very extensive and complex disabilities shall be kept away
from the appliance unless continuously supervised.
Children of less than 3 years of age should be kept away
from the appliance unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
ENGLISH
•
•
•
5
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts may
become hot during use.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
General Safety
•
•
•
•
•
•
•
•
•
•
•
WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements.
Do not operate the appliance by means of an external timer
or separate remote-control system.
WARNING: Unattended cooking on a hob with fat or oil can
be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire
blanket.
CAUTION: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
WARNING: Danger of fire: Do not store items on the cooking
surfaces.
Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
Do not use the appliance before installing it in the built-in
structure.
Disconnect the appliance from the electrical supply before
maintenance.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control and do
not rely on the pan detector.
ENGLISH
•
•
•
6
If the glass ceramic surface / glass surface is cracked, switch
off the appliance and unplug it from the mains. In case the
appliance is connected to the mains directly using junction
box, remove the fuse to disconnect the appliance from
power supply. In either case contact the Authorised Service
Centre.
If the supply cord is damaged, it must be replaced by the
manufacturer, the Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by the
manufacturer of the appliance in the instructions for use as
suitable or hob guards incorporated in the appliance. The
use of inappropriate guards can cause accidents.
Safety instructions
Installation
Warning! The appliance must be
installed by the authorised
installer.
•
•
Follow the Assembly instructions
supplied with the appliance.
•
•
•
•
•
•
•
Remove all the packaging.
Do not install or use a damaged
appliance.
Keep the minimum distance from other
appliances and units.
Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
Protect the bottom of the appliance from
steam and moisture.
Do not install the appliance adjacent to a
door or under a window. This prevents
hot cookware falling from the appliance
when the door or the window is opened.
Make sure that the space underneath the
hob is sufficient for air circulation.
The bottom of the appliance can get hot.
If the appliance is installed above the
drawers, make sure to install a noncombustible separation panel under the
appliances to prevent access to the
bottom.
Electrical Connection
Warning! Risk of fire and electric
shock.
•
•
•
•
•
All electrical connections should be made
by the authorised installer.
The appliance must be earthed.
Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Make sure the appliance is installed
correctly. Loose and incorrect electricity
ENGLISH
•
•
•
•
•
•
•
•
•
•
•
•
•
mains cable or plug (if applicable) can
make the terminal become too hot.
Use the correct electricity mains cable.
Do not let the electricity mains cable
tangle.
Make sure that a shock protection is
installed.
Use the strain relief clamp on the cable.
Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact our Authorised Service
Centre or an electrician to change a
damaged mains cable.
The shock protection of live and insulated
parts must be fastened in such a way that
it cannot be removed without tools.
Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
If the mains socket is loose, do not
connect the mains plug.
Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
7
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Use
Warning! Risk of injury, burns
and electric shock.
•
•
Remove all the packaging, labelling and
protective film (if applicable) before first
use.
This appliance is for household use only.
•
•
•
•
Do not change the specification of this
appliance.
Make sure that the ventilation openings
are not blocked.
Do not let the appliance stay unattended
during operation.
Set the cooking zone to “off” after each
use.
Do not rely on the pan detector.
Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
Do not operate the appliance with wet
hands or when it has contact with water.
Do not use the appliance as a work
surface or as a storage surface.
If the surface of the appliance is cracked,
disconnect immediately the appliance
from the power supply. This to prevent an
electrical shock.
Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
When you place food into hot oil, it may
splash.
Warning! Risk of fire and
explosion
Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
The vapours that very hot oil releases can
cause spontaneous combustion.
Used oil, that can contain food remnants,
can cause fire at a lower temperature
than oil used for the first time.
Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
Warning! Risk of damage to the
appliance.
Do not keep hot cookware on the control
panel.
Do not put a hot pan cover on the glass
surface of the hob.
Do not let cookware boil dry.
Be careful not to let objects or cookware
fall on the appliance. The surface can be
damaged.
ENGLISH
•
•
•
•
Do not activate the cooking zones with
empty cookware or without cookware.
Do not put aluminium foil on the
appliance.
Cookware made of cast iron, aluminium
or with a damaged bottom can cause
scratches on the glass / glass ceramic.
Always lift these objects up when you
have to move them on the cooking
surface.
This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
Care and cleaning
•
•
•
•
Clean the appliance regularly to prevent
the deterioration of the surface material.
Switch off the appliance and let it cool
down before cleaning.
Do not use water spray and steam to
clean the appliance.
Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do not
Installation
Warning! Refer to Safety
chapters.
8
use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Service
•
•
To repair the appliance contact the
Authorised Service Centre.
Use original spare parts only.
Disposal
Warning! Risk of injury or
suffocation.
•
•
•
Contact your municipal authority for
information on how to discard the
appliance correctly.
Disconnect the appliance from the mains
supply.
Cut off the mains electrical cable close to
the appliance and dispose of it.
ENGLISH
9
General information
590 mm
min.
55 mm
490±1
mm
min.
500 mm
520 mm
560±1
mm
min.
28 mm
min. 50 mm
min.
5 mm
max.
R 5 mm
min.
28 mm
Installation process must follow
the laws, ordinances, directives
and standards (electrical safety
rules and regulations, proper
recycling in accordance with the
regulations, etc.) in force in the
country of use!
•
•
•
If there is no oven beneath the hob,
install a separation panel under the
appliance according to the Assembly
Instruction.
Do not use silicon sealant between the
appliance and the worktop.
For further information on the installation
refer to the Assembly Instruction.
Electrical connection
Warning! Refer to Safety
chapters.
•
Warning! All electrical
connections must be made by an
authorised installer.
•
Electrical connection
•
Before connecting, check if the nominal
voltage of the appliance, provided on the
rating plate, corresponds to the available
supply voltage. The rating plate is located
on the lower casing of the hob.
•
Follow the connection diagram (it is
located on the underneath surface of the
casing of the hob).
Use only original spare parts provided by
spare parts service.
The appliance is not provided with a
mains cable. Buy the right one from a
specialized dealer. Single phase or twophase connection requires a mains cable
of minimum 70°C temperature stability.
Cable needs mandatory end sleeves.
According to IEC regulations use for onephase connection: mains cable 3 x 4mm²
and for two-phase connection: mains
ENGLISH
•
•
10
cable 4 x 2.5mm². Please respect specific
national regulations in the first priority.
You must have the means for
disconnection incorporated in the fixed
wiring.
You must have the connection and the
connecting links carried out as shown in
the connection diagram.
•
•
The earth lead is connected to terminal
and must be longer than leads carrying
electric current.
Secure the connecting cable with cable
clips or clamps.
Connection diagram
400V 2N
L1 L2
N PE
220V-240V
220V-240V
Insert the shunts
Wiring colours:
N
L
L
N PE
220V-240V
between the screws as shown.
Main power connection 1-phase
L
220V-240V 1N
Main power connection 2-phase
N
Yellow / green
Blue
Black or brown
Tighten the terminal screws
securely!
Once you connect the hob to the mains,
check if all the cooking zones are ready to
use. Place a pot with some water on a
cooking zone and set the power setting for
L1 L2 L3 N
Wiring colours:
N
L1
L2
Yellow / green
Blue
Black
Brown
each zone to the maximum level for a short
time.
If
or
symbol comes on
the display after you switch on
the hob for the first time, refer to
"Troubleshooting".
ENGLISH
11
Product description
Cooking surface layout
1
1 Single cooking zone (180 mm) 1800 W
2 Single cooking zone (180 mm) 1800 W,
2
with Booster 2500 W
3
5
4
3 Single cooking zone (145 mm) 1400 W
4 Control panel
5 Single cooking zone (210 mm) 2300 W,
with Booster 3200 W
ENGLISH
12
Control panel layout
1
2
3
4
9
1
2
7
To activate and deactivate Lock / Child
Lock / Cleaning mode.
To activate Booster (Display
shows
).
4 Power setting display:
5
6
8
To switch the appliance on / off.
3
5
,
-
6 Timer display: 00 - 99 minutes.
7
/
To increase or decrease the time.
8
/
To increase or decrease the
power setting.
9
To activate Pause.
.
Timer indicators of cooking zones.
Power setting displays
Display
Description
The cooking zone is deactivated.
The cooking zone operates.
-
Pause operates.
Booster operates.
+ digit
There is a malfunction. Refer to "Troubleshooting".
A cooking zone is still hot (residual heat).
Lock / Child Lock / Cleaning mode operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
Residual heat indicator
Warning!
There is a risk of
burns from residual heat.
The indicators show the level of the residual
heat for the cooking zones you are currently
using. The indicators may also come on for
the neighbouring cooking zones even if you
are not using them.
ENGLISH
13
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
Daily use
Switching on / off
Touch
for 1 second to switch the
appliance on / off.
Automatic Switch Off
The function switches off the appliance
automatically if:
•
•
•
•
all cooking zones are deactivated.
you do not set the power setting after
switching on the appliance.
you cover any symbol with an object (a
pan, a cloth, etc.) for longer than approx.
10 seconds.
you do not deactivate a cooking zone
after a certain time, or you do not modify
the power setting, or if overheating
occurs (e.g. when a pan boils dry). The
lights up. Before using again,
symbol
you must set the cooking zone to
Power setting
,
.
Automatic switch off
after
-
Set the power setting with
to decrease.
Touch
and
of a respective cooking
zone simultaneously to deactivate the
cooking zone. The settings will reverse to
.
6 hours
5 hours
4 hours
-
1.5 hours
If cookware that is not suitable is
used,
lights up on the display
and after 2 minutes the indicator
for the cooking zone deactivates.
Adjusting the power setting
Set the power setting with
to increase.
Using the Booster function
The Booster function makes additional
power available for the induction cooking
zones. Touch
to activate it,
lights up on the display. After a maximum of
10 minutes, the induction cooking zones
automatically return to the
power setting.
ENGLISH
14
Pause
Using the Timer
Touch
repeatedly until the indicator of a
desired cooking zone flashes. For example,
for the front right zone
.
The function sets all cooking zones that
operate to the lowest power setting
.
When the function operates, you cannot
change the power setting. The function does
not stop the Timer function.
•
To activate this function touch
symbol
•
Touch
or
of the Timer to set the time
between 00 and 99 minutes. When the
indicator of the cooking zone flashes slower,
the Timer counts down. Set the power
setting.
When the power setting is set and the time
comes to an end, an acoustic signal sounds,
00 flashes, and the cooking zone
deactivates.
to deactivate the function for the
Touch
selected cooking zone. The indicator of the
cooking zone flashes faster. Touch
and
the remaining time counts backwards to 00.
The indicator of the cooking zone goes out.
Minute Minder
You can also use this function as a Minute
Minder when the appliance works but the
cooking zones do not operate. The power
setting display shows 0.
To activate the function, touch
or
. Touch
. The
comes on.
To deactivate this function touch . The
power setting that you set before comes
on.
Lock / Cleaning mode
You can lock the control panel and keep the
cooking zones operating. It prevents an
accidental change of the power setting.
Use the function to clean the
surface of the hob during the
cooking session, if needed.
First set the power setting.
To start the function touch
on.
. The symbol
comes on for 4 seconds. The Timer stays
To stop the function touch
. The power
setting that you set before comes on.
When you switch off the appliance, you also
stop this function.
Child Lock
This function prevents an accidental
operation of the appliance.
To activate the function:
to set the time.
When the time comes to an end, an acoustic
•
signal sounds and 00 flashes. Touch
stop the signal.
Switch on the appliance with
set the power settings.
•
for 4 seconds. The symbol
Touch
comes on.
•
Switch off the appliance with
The function has no effect on the
operation of the cooking zones.
to
To deactivate the function:
. Do not
.
ENGLISH
•
15
Switch on the appliance with
. Do not
set the power settings. Touch
for 4
seconds. The symbol
•
Switch off the appliance with
Switch on the appliance with
.
symbol
•
•
. The
comes on.
Touch
for 4 seconds. Set the power
setting in 10 seconds. You can operate the
appliance.
When you switch off the appliance with
Power exchange function
•
•
•
, the function operates again.
OffSound Control (Deactivation and
activation of the sounds)
Originally the sounds of the appliance are
activated.
•
•
Activating and deactivating the sounds:
•
1. Switch off the appliance.
2. Touch
for 3 seconds. The display
comes on and goes out.
3. Touch
on.
for 3 seconds.
or
you put something on the control panel.
If there is a problem with
electrical supply and the
appliance switches off it does not
keep previous settings.
comes on.
To override the function for only one
cooking time:
•
•
Cooking zones are grouped according to
the location and number of the phases in
the hob. See the illustration.
Each phase has a maximum electricity
loading of 3700 W.
The function divides the power between
cooking zones connected to the same
phase.
The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds 3700
W.
The function decreases the power of the
other cooking zones connected to the
same phase.
The power setting display of the reduced
zones changes between two levels.
comes
of the Timer to choose one of
4. Touch
the following:
•
- the sound is off.
•
- the sound is on.
To confirm your selection wait until the
appliance switches off automatically.
When the function is set to
the sound only when:
•
•
you can hear
,
you touch
Minute Minder comes down,
Cookware guidance
Warning! Refer to Safety
chapters.
What pots to use
Only use cookware which is suitable for
induction hobs. The cookware must be made
of a ferromagnetic material, such as:
ENGLISH
16
•
•
•
•
•
cast iron;
enamelled steel;
carbon steel;
stainless steel (most types);
aluminium with ferromagnetic coating or
a ferromagnetic plate.
To determine if a pot or pan is suitable,
check for the symbol
(usually stamped on
the bottom of the cookware). You can also
hold a magnet to the bottom. If it clings to
the underside, the cookware will work on the
induction hob.
To ensure optimum efficiency, always use
pots and pans with a flat bottom that
distributes the heat evenly. If the bottom is
uneven, this will affect power and heat
conduction.
How to use
Minimum diameter of pot / pan base for
the different cooking areas
To ensure that the hob operates properly,
the cookware must have a suitable minimum
diameter as well as cover one or more of the
reference points indicated on the surface of
the hob.
Always use the cooking zone that best
corresponds to the diameter of the bottom
of the cookware.
Cooking zone
Left rear
145 - 180
Left front
125 - 210
Right rear
145 - 180
Right front
125 - 145
Empty or thin-based pots / pans
Do not use empty pots / pans or cookware
with thin bases on the hob as it will not be
able to monitor the temperature, or will turn
off automatically if the temperature is too
high. This may result in the damage of the
cookware or the hob surface. If such a
situation occurs, do not touch anything and
wait for all components to cool down.
If an error message appears, refer to
"Troubleshooting".
Hints / tips
Noises during cooking
When a cooking zone is active, it may hum
briefly. This is characteristic of all ceramic
glass cooking zones and does not impair
either the function or the life of the
appliance. The noise depends on the
cookware used. If it causes considerable
disturbance, it might help to change the
cookware.
Cookware diame‐
ter [mm]
Care and cleaning
General information
Warning! Switch off the appliance
and let it cool down before you
clean it.
Warning! For safety reasons, do
not clean the appliance with
steam blasters or high-pressure
cleaners.
Warning! Sharp objects and
abrasive cleaning agents will
damage the appliance. Clean the
appliance and remove the
residues with water and dish soap
after each use. Remove also the
remnants of the cleaning agents.
Scratches or dark stains on the
glass ceramic that cannot be
removed do not affect the
functioning of the appliance.
ENGLISH
17
Removing the residues and stubborn
residues
Food containing sugar, plastics, or tin foil
residues should be removed at once. A
scraper is the best tool for cleaning the glass
surface. It is not supplied with the appliance.
Place a scraper on the hob surface at an
angle and remove residues by sliding the
blade over the surface. Clean the appliance
using a damp cloth and some dish soap.
Finally, wipe the glass surface dry with a
clean cloth.
Limescale rings, water rings, fat splashes, or
shiny metallic discolourations should be
removed after the appliance has cooled
down. Use only a specialised cleaner for
glass ceramic or stainless steel.
Troubleshooting
Warning! Refer to Safety
chapters.
What to do if…
Problem
You cannot switch on the
appliance or operate it.
Possible cause
Remedy
The appliance is not connec‐
ted to an electrical supply or
it is connected incorrectly.
Check if the appliance is cor‐
rectly connected to the electri‐
cal supply. Ensure a correct in‐
stallation by calling an author‐
ised installer.
More than 10 seconds
passed since you switched
on the appliance.
Switch on the appliance again.
Child Lock or Lock is on
.
Deactivate Child Lock. Refer to "
Child Lock" or " Lock".
Several symbols on the con‐
trol panel were touched at
the same time.
Touch only one symbol at a
time.
There is water or fat stains
on the control panel.
Clean the control panel and
wait for a few seconds before
switching on again.
An acoustic signal sounds
and the appliance switches
off.
One or more symbols on the Remove any objects from the
control panel have been cov‐ symbols.
ered for longer than 10 sec‐
onds.
The display keeps switch‐
ing between two power
settings.
Power exchange function is
reducing the power of this
cooking zone.
Refer to " Power exchange
function".
ENGLISH
Problem
18
Possible cause
Remedy
Residual heat indicator is
not displaying anything.
The cooking zone was only
on for a short time and is
therefore not hot.
If the cooking zone is supposed
to be hot, call the After Sales
Service.
There is no signal when
you touch panel symbols.
The signals are deactivated.
Activate the signals. Refer to
"OffSound Control".
Unsuitable cookware.
Use suitable cookware.
No cookware on the cooking
zone.
Place cookware on the cooking
zone.
The diameter of the bottom
of the cookware is too small
for the cooking zone.
Move onto a smaller cooking
zone.
There is an error in the hob.
Disconnect the hob from the
electrical supply for some time.
Disconnect the fuse from the
electrical system of the house.
comes on.
and a number come on.
Connect it again. If
comes
on again, speak to an author‐
ised installer.
comes on after switch‐
ing on the appliance.
comes on.
The electrical connection is
incorrect.
Check if the appliance is cor‐
rectly connected to the electri‐
cal supply. Ensure a correct in‐
stallation by calling an author‐
ised installer.
Automatic Switch Off and the Switch off the appliance. Re‐
overheating protection for
move the hot cookware. After
the cooking zone operate.
approximately 30 seconds acti‐
vate the cooking zone again.
should disappear, Residual
heat indicator can stay. Cool
down the cookware and check
it with "Cookware guidance".
comes on.
The electrical connection is
incorrect. The hob is connec‐
ted to one phase only.
Check if the appliance is cor‐
rectly connected to the electri‐
cal supply. Ensure a correct in‐
stallation by calling an author‐
ised installer.
The electronics may be dam‐
aged.
Contact your IKEA store call
centre.
ENGLISH
Problem
You can hear a constant
beep noise.
19
Possible cause
Remedy
The electrical connection is
incorrect.
If there is a fault, try to resolve it by
following the troubleshooting guidelines.
If the problem cannot be resolved, contact
your IKEA store or the After Sales Service.
You can find a full list of IKEA appointed
contacts at the end of this user manual.
Disconnect the hob from the
electrical supply. Ensure a cor‐
rect installation by calling an
authorised installer.
If you operated the appliance
wrongly, or the installation was
not carried out by an authorised
installer, the visit from the After
Sales Service technician or dealer
may not take place free of charge,
even during the warranty period.
Technical data
Rating Plate
Country of origin
© Inter IKEA Systems B.V. 1999
Model 00000000
Typ 60 GAD DC AU 7.35kW
PNC 000 000 000 00 S No .................... 220V-240V AC 50-60 Hz
21552
IKEA of Sweden AB
SE - 343 81 Älmhult
PQM
000.000.00
The graphic above serves to represent the
rating plate of the appliance. The actual
rating plate is located on the bottom of the
casing. The serial number is specific to each
product.
230 V
DGT
to assist you better by identifying precisely
your hob, in case you need our assistance in
the future. Thank you for your help!
Dear Customer, keep the additional rating
plate with the user manual. This will allow us
Energy efficiency
Product information according to EU 66/2014 valid for EU market only
Model identification
MATMÄSSIG
504-672-51
Type of hob
Built-In Hob
Number of cooking zones
4
Heating technology
Induction
ENGLISH
20
Diameter of circular cook‐
ing zones (Ø)
Left front
Left rear
Right front
Right rear
21.0 cm
18.0 cm
14.5 cm
18.0 cm
Energy consumption per
cooking zone (EC electric
cooking)
Left front
Left rear
Right front
Right rear
188.9 Wh / kg
178.8 Wh / kg
183.4 Wh / kg
176.9 Wh / kg
Energy consumption of the
hob (EC electric hob)
182.0 Wh / kg
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
•
Energy saving
•
You can save energy during everyday
cooking if you follow below hints.
•
•
•
When you heat up water, use only the
amount you need.
•
If it is possible, always put the lids on the
cookware.
Before you activate the cooking zone put
the cookware on it.
Put the smaller cookware on the smaller
cooking zones.
Put the cookware directly in the centre of
the cooking zone.
Use the residual heat to keep the food
warm or to melt it.
Environmental concerns
Recycle materials with the symbol
. Put
the packaging in relevant containers to
recycle it. Help protect the environment and
human health by recycling waste of electrical
and electronic appliances. Do not dispose of
appliances marked with the symbol with
the household waste. Return the product to
your local recycling facility or contact your
municipal office.
IKEA guarantee
How long is the IKEA guarantee valid?
This guarantee is valid for five (5) years - two
(2) years if the appliance is named LAGAN or
TILLREDA - from the original date of
purchase of your appliance at IKEA or from
the installation date with maximum limit of
three months from the purchase date. The
original sales receipt, is required as proof of
purchase. If service work is carried out under
guarantee, this will not extend the
guarantee period for the appliance. Once a
warranted product has been replaced, the
replaced product warranty will be valid for
the balance period from date of original
purchase invoice.
Who will execute the service?
IKEA service provider will provide the service
through its own service operations or
authorized service partner network.
What does this guarantee cover?
•
The guarantee covers faults of the
appliance, which have been caused by
faulty construction or material faults from
ENGLISH
the date of purchase from IKEA or from
the installation date with maximum limit
of three months from the purchase date.
• This guarantee applies to domestic use
only.
• The exceptions are specified under the
headline “What is not covered under this
guarantee?” Within the guarantee period.
• The costs to remedy the fault e.g. repairs,
parts, labour and travel will be covered,
provided that the appliance is accessible
for repair without special expenditure. On
these conditions the respective local
regulations are applicable.
• Replaced parts become the property of
IKEA.
• In case of non-repairable product, the
retail value of the replacement will not
exceed the purchase price that was paid
by the customer
What will IKEA do to correct the problem?
•
IKEA appointed Service Provider will
examine the product and decide, at its
sole discretion, if it is covered under this
guarantee. If considered covered, IKEA
Service Provider or its authorized service
partner through its own service
operations, will then, at its sole discretion,
either repair the defective product or
replace it with the same or a comparable
product.
What is not covered under this
guarantee?
•
•
•
•
Normal wear and tear.
Deliberate or negligent damage, damage
caused by failure to observe operating
instructions, incorrect installation or by
connection to the wrong voltage, damage
caused by chemical or electro-chemical
reaction, rust, corrosion or water damage
including but not limited to damage
caused by excessive lime in the water
supply, damage caused by abnormal
environmental conditions.
Consumable parts including batteries and
lamps.
Non-functional and decorative parts
which do not affect normal use of the
21
•
•
•
•
•
•
•
•
•
•
appliance, including any scratches and
possible colour differences.
Accidental damage caused by foreign
objects or substances and cleaning or
unblocking of filters, drainage systems or
soap drawers.
Damage to the following parts: ceramic
glass, accessories, crockery and cutlery
baskets, feed and drainage pipes, seals,
lamps and lamp covers, screens, knobs,
casings and parts of casings. Unless such
damages can be proved to have been
caused by production faults.
Cases where no fault could be found
during a technician’s visit.
Repairs not carried out by our appointed
service providers and/or an authorized
service contractual partner or where nonoriginal parts have been used.
Repairs caused by installation which is
faulty or not according to specification.
The use of the appliance in a nondomestic environment i.e. professional
use.
Damage resulting from power outage,
power surges or dips, fluctuating voltage
or improper voltage All workout parts are
not covered by the guarantee e.g.: filters
and cleanliness.
Transportation damages. If a customer
transports the product to his home or
another address, IKEA is not liable for any
damage that may occur during transport.
However, if IKEA delivers the product to
the customer’s delivery address, then
damage to the product that occurs during
this delivery will be covered by IKEA.
Cost for carrying out the initial installation
of the IKEA appliance. However, if an IKEA
service provider or its authorized service
partner repairs or replaces the appliance
under the terms of this guarantee, the
service provider or its authorized service
partner will re-install the repaired
appliance or install the replacement, if
necessary.
All plumping and electrical installation,
are not the responsibility of IKEA, and
customer must complete these work
before the execution work.
ENGLISH
How country law applies
The IKEA guarantee gives you specific legal
rights, which covers or exceed local
demands. However these conditions do not
limit in any way consumer rights described
in the local legislation.
Area of validity
This warranty is valid only in the country
where the product has been purchased; the
services will be provided in the framework of
the guarantee conditions.
An obligation to carry out services in the
framework of the guarantee exists only if the
appliance complies and is installed in
accordance with:
•
the technical specifications of the country
in which the guarantee claim is made;
• the Assembly Instructions and User
Manual Safety Information;
The dedicated After Sales Service for IKEA
appliances:
Please don’t hesitate to contact IKEA
appointed After Sales Service Provider to:
•
make a service request under this
guarantee;
• ask for clarifications on installation of the
IKEA appliance in the dedicated IKEA
kitchen furniture;
• ask for clarification on functions of IKEA
appliances.
To ensure that we provide you with the best
assistance, please read carefully the
Assembly Instructions and/or the User
Manual before contacting us.
How to reach us if you need our service
Please refer to the last page of this manual
for the full list of IKEA appointed contacts
and relative national phone numbers.
22
In order to provide you with a
quicker service, we recommend
that you use the specific phone
numbers listed at the end of this
manual. Always refer to the
numbers listed in the booklet of
the specific appliance you need
an assistance for. Before calling
us, assure that you have to hand
the IKEA article number (8 digit
code) and the Serial Number (8
digit code that can be found on
the rating plate) for the appliance
of which you need our assistance.
SAVE THE SALES RECEIPT! It is
your proof of purchase and
required for the guarantee to
apply. The sales receipt also
reports the IKEA name and article
number (8 digit code) for each of
the appliances you have
purchased.
23
UNITED ARAB EMIRATES & OMAN
Toll free:
8 004 532
Web:
www.IKEA.com
: ‫رﻗﻢ ﻣﺠﺎﻧﻲ‬
: ‫ﻣﻮﻗﻊ اﻹﻧﺘﺮﻧﺖ‬
QATAR
Toll free:
8 004 532
Web:
e-mail:
www.IKEA.qa
Ikea_qatar@alfuttaim.com
: ‫رﻗﻢ ﻣﺠﺎﻧﻲ‬
: ‫ﻣﻮﻗﻊ اﻹﻧﺘﺮﻧﺖ‬
: ‫اﻟﺒﺮﻳﺪ اﻹﻟﻜﺘﺮوﻧﻲ‬
EGYPT
H o t l i n e:
16 5 7 6
Web:
e-mail:
www.IKEA.eg
IkeaCairo.customerservice@alfuttaim.com
: ‫اﻟﺨﻂ اﻟﺴﺎﺧﻦ‬
: ‫ﻣﻮﻗﻊ اﻹﻧﺘﺮﻧﺖ‬
: ‫اﻟﺒﺮﻳﺪ اﻹﻟﻜﺘﺮوﻧﻲ‬
STATE OF KUWAIT
Contact centre:
+965 18 40 40 8
Web:
www.IKEA.com.kw
e-mail:
info@IKEA.com.kw
: ‫ﻣﺮﻛﺰ اﻻﺗﺼﺎل‬
: ‫ﻣﻮﻗﻊ اﻹﻧﺘﺮﻧﺖ‬
: ‫اﻟﺒﺮﻳﺪ اﻹﻟﻜﺘﺮوﻧﻲ‬
JORDAN
Contact centre:
Web:
+962 6 400 1000
www.IKEA.jo
: ‫ﻣﺮﻛﺰ اﻻﺗﺼﺎل‬
: ‫ﻣﻮﻗﻊ اﻹﻧﺘﺮﻧﺖ‬
KINGDOM OF SAUDI ARABIA
Contact centre:
92000-4532
Our phone lines are
open:
Saturday - Thursday
Friday
: ‫ﻣﺮﻛﺰ اﻻﺗﺼﺎل‬
: ‫ﺧﻄﻮط اﻟﻬﺎﺗﻒ ﻟﺪﻳﻨﺎ ﻣﻔﺘﻮﺣﺔ‬
09:00 AM - 10:00 PM
2:00 PM - 10:00 PM
‫ اﻟﺨﻤﻴﺲ‬- ‫اﻟﺴﺒﺖ‬
‫ﻳﻮم اﻟﺠﻤﻌﺔ‬
BAHRAIN
Contact centre:
Our telephone lines
are open all day
80001120
09:00 AM - 10:00 PM
*
: ‫ﻣﺮﻛﺰ اﻻﺗﺼﺎل‬
‫ﺧﻄﻮط اﻟﻬﺎﺗﻒ ﻟﺪﻳﻨﺎ ﻣﻔﺘﻮﺣﺔ‬
‫ﻃﻮال اﻟﻴﻮم‬
867357906-A-072020
© Inter IKEA Systems B.V. 2020
21552
AA-2198462-1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement