Robertshaw SHF Solenoid Coil for Heat Pump Reversing Valves Manual

Robertshaw SHF Solenoid Coil for Heat Pump Reversing Valves Manual
INSTALLATION DATA
TYPE SHF SOLENOID COILS FOR
HEAT PUMP REVERSING VALVES
DESCRIPTION / APPLICATION
Type SHF solenoid coils are encap­sulated, continuous duty, moisture
resistant magnetic coils designed to operate the pilot valve controlling
the reversing valve. The SHF is rated UL Thermal Class “A” (105).
APPLICATION
Type SHF solenoid coils are designed for use with Vl -4, V2-4,
V3-4, V6-4, V10-4, Vl2-4 Ranco® Heat Pump Reversing Valves.
FEATURES
• Encapsulated
• Moisture resistant magnetic coil is fungus proof
• Class A rating, suitable for operation at 10% over and 15%
under rated voltage
• Connection - Quick connect W29 wiring harness
• Designed for low wattage - efficient operation at hot summer
and cold winter ambients
OPERATION
The SHF is designed for 50/60 Hz operational at 15% underrated
voltage as well as 10% over rated voltage for short periods.
INSTALLATION
Place the SHF coil over solenoid tube of pilot valve. Install the
coil mounting screw and tighten to a min­imum torque of 22.4
inch pounds and a maximum torque of 33.9 inch­pounds.
Wiring Harness SHF Plug - align arrow on plug with arrow on coil
and push on until terminals on coil are fully engaged. Connect
wiring har­ness to equipment wiring using wiring nuts and/or
splice connectors. Wiring Harness SHF Plug: Align arrow on plug with
arrow on coil and push on until terminals on coil are fully engaged.
Part Number
Voltage (V AC)
Watts
50 Hz
Watts
60 Hz
SHF-110000-070
24
6
5
SHF-310000-070
120
6
5
SHF-410000-070
220/240
6
5
WARNING
Electrical Shock Hazard - Turn off power at the main power source
before installing the SHF control. DO NOT restore electrical power
to the unit until the SHF control is properly installed and cover
assembled.
The Ranco® SHF Series Solenoid Coils are designed for use with
CURRENT production Generation 5 V0, V1, V2, V3, V6, V10 and
V12 Ranco 4-way Reversing Valves.
The Ranco® LDK Series Solenoid Coils are designed ONLY for use
with Generation 4 V0, V1, V2, V3, V6, V10 and V12 Ranco 4-way
Reversing Valves.
AVERTISSEMENT
Risque de choc électrique - Couper le courant à la source
d’alimentation principale avant d’installer le contrôleur SHF. NE
PAS rétablir l’alimentation électrique de l’appareil avant que le
contrôleur SHF ne soit correctement installé et que le couvercle ne
soit assemblé.
Les solénoïdes de la série SHF de Ranco® sont conçus pour être
utilisés avec les soupapes actuelles de service (Génération 5) V0,
V1, V2, V3, V6, V10 et soupapes inverseuses 4-Way V12 Ranco.
Les solénoïdes de la série LDK de Ranco® sont conçus
UNIQUEMENT pour être utilisés avec les soupapes actuelles
de service (Génération 4) V0, V1, V2, V3, V6, V10 et soupapes
inverseuses 4-Way V12 Ranco.
Customer Service (Europe) +420.587.805.197
Customer Service (Europe) Facsimile: +420.587.805.244
monika.hruba@robertshaw.com
veronika.tomaskova@robertshaw.com
Customer Service (Americas) +1.800.304.6563
HVACCustomerService@robertshaw.com
For Technical Service
Telephone 1.800.445.8299
TechnicalService@robertshaw.com
Robertshaw®, Ranco®, Paragon® and Uni-Line® are
trademarks of Robertshaw, its subsidiaries and/or affiliated
companies. All other brands mentioned may be the
trademarks of their respective owners.
www.robertshaw.com
©2018 Robertshaw
01/18 –352-00271-001
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement