Leapfrog Tad's Get Ready for School Book Parent Guide

Leapfrog Tad's Get Ready for School Book Parent Guide
™
Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003352-000
US
INTRODUCTION
Let’s get ready for school! Join Tad and Lily as they prepare
for school by learning numbers, letters, colors, shapes, animals,
emotions, community helpers and musical instruments! Play
with the clock to learn about telling time. Press the music
button to hear six different learning songs. Choose Level One
or Level Two, then when you’re ready, move to Find It mode
to test yourself.
Talking Clock
Level
Switch
F.P.O.
12 Interactive
Pages
On/Off/Volume
Control Switch
Tad
Button
Music
Button
2
INCLUDED IN THIS PACKAGE
•
•
One Tad’s Get Ready for School BookTM
One parent’s guide
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE:
Please keep this parent’s guide as it contains important
information.
Unlock the packaging locks:
Rotate the packaging locks 90 degrees counterclockwise.
Pull out the packaging locks and discard.
3
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the battery
cover.
4. Install 2 new AA (AM-3/LR6) batteries into the battery
box as illustrated. (The use of new alkaline batteries is
recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.
4
BATTERY NOTICE
•
•
•
•
•
•
•
•
•
•
•
•
Use new alkaline batteries for maximum performance.
Use only batteries of the same or equivalent type as
recommended.
Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (Ni-Cd, Ni-MH), or new and
used batteries.
Do not use damaged batteries.
Insert batteries with the correct polarity.
Do not short-circuit the battery terminals.
Remove exhausted batteries from the toy.
Remove batteries during long periods of non-use.
Do not dispose of batteries in fire.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the toy before charging
(if removable).
Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
•
•
•
•
•
•
•
•
•
•
•
•
Utilisez de nouvelles piles alcalines pour une performance
maximale.
Seules des piles du type recommandé doivent être utilisées.
Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
Ne pas utiliser des piles ou des accumulateurs endommagés.
Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
Enlever les piles ou les accumulateurs usagés du jouet.
Retirer les piles ou les accumulateurs en cas de nonutilisation prolongée.
Ne les jeter ni au feu ni dans la nature.
Ne pas tenter de recharger des piles non rechargeables.
Enlever les accumulateurs du jouet pour les recharger.
Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.
5
PRODUCT FEATURES
1. On/Off/Volume Control Switch
Slide the On/Off/Volume Control Switch
to turn the toy on and select the volume.
2. Three Modes
Slide the Level Switch to choose Level
One, Level Two or Find It mode for a fun
quiz on each page.
3. Tad Button
Press the Tad Button to hear about each
two-page spread.
4. Music Button
Press the Music Button to hear six
different learning songs.
5. 12 Interactive Pages
Touch the pages to learn everything
needed for success in school including
numbers, letters, colors, shapes, animals,
emotions, community helpers and
musical instruments.
6. Automatic Shut Off
To preserve battery life, Tad’s Get Ready for School BookTM
will automatically power down after approximately 60
seconds without input. The unit can be turned on again by
pressing any button.
6
HOW TO PLAY
To get the most from your Tad’s Get Ready for School BookTM,
follow these simple instructions:
1.
When playing, make sure the book is fully
open. The pages should lay flat against
the book covers.
2. If the pages are not laying flat the book
will not operate correctly.
3. For optimal performance, use one finger
to touch the pages.
4. Do not touch more than one picture at
a time.
5. Do not use more than one finger to touch
a picture on the page and avoid resting
your hand on the page.
7
ACTIVITIES
1. Level One
Slide the Level Switch to Level One
mode and touch the pictures on the
pages to learn the basics, like number
identification.
2. Level Two
Slide the Level Switch to Level Two
mode and touch the pictures on the
pages to learn more advanced concepts,
like counting.
3. Find It
Slide the Level Switch to Find It mode
to answer questions about the pictures
on the page.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat source.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
5. Make sure the book pages are kept dry and flat.
8
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back ON. The unit will now be ready to play
again.
5. If the unit still does not work, replace with an entire set of
new batteries.
Environmental phenomena.
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement.
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
9
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
support@leapfrog.com. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
10
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
11
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
For warranty information, please visit
leapfrog.com/warranty.
LeapFrog Enterprises, Inc.,
a subsidiary of VTech Holdings Limited.
TM & © 2017 LeapFrog Enterprises, Inc.
All rights reserved.
91-003352-000 US
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement