SportsArt C545R Owner Manual

SportsArt C545R Owner Manual
sa well+ MANUAL CONTENTS
GENERAL DESCRIPTION ....................................................................
1. SA WELL+ SYSTEM STRUCTURE ...................................................
2. SCAN QR CODE TO CONNECT TO THE EQUIPMENT ...................
3. HOW TO USE SA WELL+ ..................................................................
2
2
3
4
HARDWARE ASSEMBLY ....................................................................... 5
1. LIST OF PARTS .................................................................................. 5
2. TREADMILL CONSOLE ASSEMBLY .................................................. 6
3. OTHER CONSOLE ASSEMBLY ......................................................... 10
SA WELL+ SYSTEM OPERATION ........................................................
1. SA WELL+ APP OPERATION ............................................................
2. SA WELL+ PRODUCT OPERATION .................................................
3. SA WELL+ WEBSITE OPERA TION ..................................................
14
14
21
23
SA WELL+ SYSTEM STRUCTURE ......................................................
1. BLUETOOTH SYSTEM STRUCTURE ..............................................
2. WIFI SYSTEM STRUCTURE ............................................................
3. DATA TRANSMITTION AND USER ID ..............................................
31
31
31
34
SA WELL+ SYSTEM WIFI VERSION PACKAGE ................................. 35
SA WELL+ BLOCK DIAGRAM ................................................................ 36
1
General description
SA WELL+ system is compatible with SportsArt treadmill, elliptical, cycle
products as well as strength equipment. The SA WELL+ system has Bluetooth and WiFi versions. Please familiarize yourself with this Owner's Manual
and read the following instructions carefully according to your select version.
1. SA WELL+ SYSTEM STRUCTURE
1.1 Smart Phone
Smart phone and tablet PC should equip with lower energy consumption
Bluetooth version 4.0 or WiFi.
(a) Apple smart phone: Operation system software version iOS6 or above
(iOS7.1 is recommended for most reliable.)
(b) Android smart phone: Operation system software version Android 4.3 or
above. (Except Android tablet PC.)
1.2 Router
Smart phone or Mini PC can connect to the internet or the cloud server
through a Router.
1.3 Wireless Access Point (Available on WiFi Version only)
A Wireless Access Point is a networking hardware device that allows smart
phone or Mini PC to connect to the exercise equipment using WiFi and support the connection of multiple exercise equipment.
1.4 Mini PC (Available on WiFi Version only)
Mini PC is used to manage exercise equipment and show information about
the energy contribution of the Green System has provided to grid for user's
reference.
2
2. SCAN QR CODE TO CONNECT TO THE EQUIPMENT
Use SA WELL+ App to scan the QR code on the console to connect to the
equipment.
2.1 How QR Code Work with SA WELL+
(a) Use smart phone to scan the QR code.
(b) Bluetooth version: Connect with SportsArt exercise equipment via
Bluetooth.
WiFi version: Connect with SportsArt exercise equipment via
Wireless Access Point.
(c) Transmit workout date to cloud server.
Cloud management
system
http://sawellplus.gosportsart.com



3
3. HOW TO USE SA WELL+
3.1 Bluetooth Version
(a) Install SA WELL+ Bluetooth version into SportsArt exercise
equipment.
(b) For smart phone, user may download the App "SA WELL+" from the
Google Play Store or iTunes App Store and install it.
(c) First time user must create an user account, and then login with your
ID and password.
(d) First, enable Bluetooth on your smart phone. Enable WiFi/3G/4G as
well if you'd like to transmit the workout data to the cloud server.
(e) Enter SA WELL+ App home page and tap the "Workout" button to
scan the QR code on the console to connect to the equipment.
(f) When connected, you will see the workout data.
(g) User may use App or visit SA WELL+ website to review the workout
history.
3.2 Wifi Version
(a) Install SA WELL+ WiFi version into SportsArt exercise equipment and
connect your equipment as page.32 shown and then turn on Mini PC
to enter the main page of SGwebUI.
(b) For smart phone, user may download the App "SA WELL+" from the
Google Play Store or iTunes App Store and install it.
(c) First time user must create an user account, and then login with your
ID and password.
(d) First, enable WiFi on your smart phone to connect to the product and
transmit the workout data to the cloud server.
(e) Enter SA WELL+ App home page and tap the "Workout" button to
scan the QR code on the console to connect to the equipment.
(f) When connected, you will see the workout data.
(g) User may use App or visit SA WELL+ website to review the workout
history.
4
hardware assembly
1. LIST OF PARTS
No.
A1
A2
A3
A4
Assembly Parts
Part Name
Q’ty No. Part Name
Q’ty
Manual
1
A5 SA WELL+ to CTL cable 1
Mushroom head
SA WELL+ assembly
1
A6
3
Phillips screw
Bag with 3~5 pcs QR
1
A7 Zip Tie
2
code labels
SA WELL+ to USB
1
A8 Battery
1
cable
Note: SA WELL+ to USB cable (A4) and SA WELL+ to CTL cable (A5) have
been installed to SA WELL+ assembly (A2).
Note: Each QR code is unique; it must match SA WELL+ hardware individually. When replace the console cover, you must get one of the spare QR
code sticker (A3) comes with the SA WELL+ hardware to place on the cover
again to ensure the match. Otherwise, it can’t be syncing correctly.
5
2. TREADMILL CONSOLE ASSEMBLY
Note: For T616/T635/T635M/T645/T655/T655M/T655MD/T675
(a) Remove the screws holding the console covers together.
(b) Remove the upper console cover from the top.
(a)
(b)
6
(c) Remove battery (A8) from its package and place it on the SA WELL+
assembly (A2). Note: Please make sure the battery + side is facing up.
(d) Follow the direction A, B and C on the picture below and place the SA
WELL+ assembly in place. Secure it with screw onto the screw columns.
Note: The correct screw hole should be the upper one on location A.
(c)
B
C
A
(d)
C
B
A
7
(e) Cut the zip tie holding the cables together.
(f) Unplug the cables from D&E (There could be 2 different cables on the D
location; USB cable or two cables of USB & LED indicator cable). Re
move all cables from D location no matter what type of cables there.
Instead, plug the SA WELL+ to USB cable (A4) (both 4 pin & 5 pin
connectors) to D location. There is another orange cable coming from the
5 pin connector still. Plug this orange cable to H location.
(g) Move the 2 pin connector from the F location (Some cases, the 2 pin
connector might not plug into F location to begin with) to G location.
(h) Plug the SA WELL+ to CTL (A5) 7 pin cable into location E.
Note: use zip tie to tie all the remaining cables together.
(e)
D
D
(f)
A
E
B
E
H
E
OR
D
H
(g)
F
G
G
OR
(h)
E
8
(i) Remove the QR code label holder from the SA WELL+ (A2) assembly.
Take one of the QR code labels (A3) out of the chain and put the label
chain back to SA WELL+ assembly.
(j) Place the QR code label (A3) on the J location on the console cover. Or
place the QR code label (A3) on an empty spot on the console if there is
no J location available.
(k) Place the console cover back in place.
(l) Secure the covers together with previously removed screws.
(i)
(j)
J
(k)
(l)
9
3. OTHER CONSOLE ASSEMBLY
Note: For E865/E875/C575R/C575U/S715/S775/S776
(a) Remove the screws holding the console covers together.
(b) Remove the upper console cover from the top.
(a)
(b)
10
(c) Remove battery (A8) from its package and place it on the SA WELL+
assembly (A2). Please make sure the battery + side is facing up.
(d) Follow the A,B,C,D direction on the picture below and place the SA WELL+
assembly in place. Secure it with screw onto the screw columns A & D.
Note: The correct screw hole should be the lower one on A location.
(c)
D
B
C
A
(d)
D
C
B
A
11
(e) Cut the zip tie holding the cables together.
(f) Unplug the cables from E&F (There could be 2 different cables on the E
location; USB cable or two cables of USB & LED indicator cable). Re
move all cables from D location no matter what type of cables there.
Instead, plug the SA WELL+ to USB cable (A4) (both 4 pin & 5 pin
connectors) to E location. There is another orange cable coming from the
5 pin connector still. Plug this orange cable to J location.
(g) Move the 2 pin connector from the G location (Some cases, the 2 pin
connector might not plug into H location to begin with) to H location.
(h) Plug the SA WELL+ to CTL (A5) 7 pin cable into location F.
Note: use zip tie to tie all the remaining cables together.
(e)
E
(f)
E
F
E
F
J
F
J
OR
(g)
E
G
H
J
OR
H
(h)
F
12
(i) Remove the QR code label holder from the SA WELL+ (A2) assembly.
Take one of the QR code labels (A3) out of the holder and put the holder
back to SA WELL+ assembly.
(j) Place the QR code label (A3) on the J location on the console cover. Or
place the QR code label (A3) on an empty spot on the console if there is
no J location available.
(k) Place the console cover back in place.
(l) Secure the covers together with previously removed screws.
(i)
13
sa well+ SYSTEM operation
1. SA WELL+ APP OPERATION
1.1 How to Download Smart Phone SA WELL+ App
Visit SA WELL+ official website (http://sawellplus.gosportsart.com) to download "SA WELL+" App.
(a) Link to SA WELL+ website to scan the QR code according to your smart
phone to download SA WELL+ App.
(Note: iPhone user please scan the QR Code of App Store and Android
user please scan the one of Google Play as below.)
(b) Scan the QR code on the console with the smart phone and link to SA
WELL+ website to scan the QR code to download SA WELL+ App.
(Note: Before scanning QR code, you must have a smartphone equipped
with a camera and a QR code reader/scanner application feature.)
(c) After installation, the SA WELL+ icon will appear on the phone if your
smart phone is compatible with SA WELL+ system.
(Note: Remove Bluelight filter App on the phone first if you have it installed
before download the SA WELL+ App.)
14
(d) SA WELL+ Compatible with iPad
According to APPLE, applications designed for iPhone are also
compatible with iPad. To do that, users have to choose ‘iPhone only’ first,
and download the application. For iPad, please refer to the following
instructions.
1. To download the application, please search for ‘SA WELL+’ in your App
store.
2. Select “iPad only”, which is at the top left corner of the screen.
3. A dropdown menu coming with two options will show up automatically.
Users must choose “i Phone only” from it. Otherwise, “SA WELL+” won’t
be found.
4. Download the application.
5. Click the “2x” button at the bottom right corner of the screen to zoom in.
6. Finally, we may see a clear home page.
15
1.2 SA WELL+ App Sign Up
(a) First time user must create an user account with SA WELL+ App. After
sign up, user information will be saved into the account and no need to
sign up again. When creating an account, the smart phone will need to
connect to internet via WiFi or 3G/4G network.
(b) See below picture for account sign up page. After filling all the user
information, press “Done” to complete the account sign up.
16
1.3 SA WELL+ App Login
(a) See below picture to login to the user account.
(b) There are 4 options on the Home page to select from:
(1) Home : Set up Weekly Goal with time, distance or calories.
Log (top right corner): Manually log the workout data.
(2) Workout: Enter this area to scan the QR code on the console to
connect to the equipment.
(3) Results: Review workout summary & history.
(4) Settings: Change system settings or logout.
1.4 SA WELL+ App Log
(a) This feature allows user to manually log the workout data. The data will
automatically consolidate with previous workout and save into the cloud
server.
(b) There are 2 different types of workout for logging: Cardio and Strength.
Select the appropriate tab for entry.
17
1.5 SA WELL+ App Workout
(a) Select the Workout option to scan product QR code and link with the
product. When connected via Bluetooth/WiFi, the blue LED will light up
to indicate it is connected to the product.
(b) Before you can establish the connection, you must first enable the
Bluetooth/WiFi function on the smart phone. The following left message
window will appear if the Bluetooth/WiFi function is disabled.
Furthermore, if the connection timeout, the following right message
window will appear. Press OK to back to Home and scan QR code to
reconnect.
Note: If the connection of Bluetooth/WiFi fails or disconnect, the blue
LED will be flashing.
18
1.6 SA WELL+ App Workout Progress
(a) Once the product connection is established via Bluetooth/WiFi, the
workout data will appear on the smart phone screen.
(b) Press START key to start exercising, the workout data will appear on the
smart phone screen and be recorded.
(c) Press END button on the smart phone screen or STOP button on the
console to end the exercise program and Bluetooth/WiFi connection
and then "Workout Completed" will appear on the smart phone screen.
1.7 SA WELL+ App Result
(a) Enter this page to review workout summary and history.
(b) The summary can be sorted by different options; such as time, distance,
calories or charts as below shown.
19
1.8 SA WELL+ App Settings
(a) Enter this page to change the settings.
(b) Select Logout to finish using SA WELL+ App.
1.9 SA WELL+ App Offline
(a) When there is no wireless network available, you may use Offline option
to login.
(b) The operation procedure is the same as online, but there will be no 4
options (Home/Workout/Results/Settings) on the Home page to select
from.
(c) The workout data will be saved into the smart phone. You may press
"Log" (top right corner) to check the workout data that hasn't been
transferred to cloud server.
Note: The workout data will be transfered to cloud server when there is
an internet connection and will be deleted from your smart phone.
20
2. SA WELL+ PRODUCT OPERATION
2.1 LED Console Settings
Before starting a workout, LED user must set up the program setting on the
console: Program selection >> Select workout goal >> set age and weight.
2.2 Entertainment Cap on the Console
(a) SA WELL+ button: When a smart phone is connected with equipment,
press this button to disconnect. Use SA WELL+ App to scan the QR code
on the console to connect to the equipment again if necessary.
(b) USB port: This port is used for device charging and data transmitting
(c) USB port: This port is used for device charging and media player
function for 15” touch screen products .
2.3 How to End Bluetooth/WiFi Connection
(a) Press END button on the smart phone screen.
(b) Press red SA WELL+ button on the console entertainment cap.
(c) Press STOP button on the console to end program.
21
2.4 Calendar Setting on the Console
(a) When to set the calendar?
(1) When the SA WELL+ option is installed into the console with battery,
it is necessary to establish local date and time information to start
operation.
(2) When the battery of calendar runs out of power, it will ask you to reset
local date and time in order to start operation.
(3) When your smart phone is connected with the console. The console
will set up the same date and time as your smart phone.
(b) How to set up the calendar on the console?
Press ENTER and CHANGE keys at the same time for 2 seconds to
enter the setting. The date/time code and message will swap & repeat
itself every 4 seconds.
CALORIES
1
0 -- 2
CALORIES
M M -- D
4
SPEED
-- 2
D
SPEED
-- Y
0
E
0
TIME
5
DISTANCE
1 8: 3
0
A
TIME
R
DISTANCE
H H: M M
The 1st setting of Month will be flashing to indicate the setting sequence.
Press UP/DOWN key to change the setting. Press CHANGE to go to next
setting (DATE) and so forth until it is all set. The numeric key pad will not
work here for entry.
After setting, press ENTER to confirm and exit this mode.
22
3. SA WELL+ WEBSITE OPERATION
Visit SA WELL+ website for more details and operation descriptions.
3.1 SA WELL+ Official Website
Website address: http://sawellplus.gosportsart.com
(a) In this web page, user will be able to sign up or sign in to the user
account. You can also download smart phone SA WELL+ App and USB
upload PC program as well.
(b) Press SportsArt logo will take you to SportsArt company official website.
(http://www.gosportsart.com)
23
3.2 Home Page
(a) In this web page, user may review the weekly workout summary and set
up your workout goal.
(b) The weekly goal percentage can be set with time, distance or calories.
(c) The main function is the weekly goal achieving percentage and weekly
workout summary.
24
3.3 Result
(a) This page is displaying user workout statistics chart and history with graph.
(b) There are 3 workout categories to select from: Cardio Chart, Strength
Chart and Historical Data.
25
3.4 Workout Log
(a) This page is for manually logging the workout data to the summary.
(b) There are two workout categories (Cardio and Strength) to log data.
3.5 Weight Graph
This is for user to manage weight.
26
3.6 USB Disk Upload Procedure
(a) Download the USB upload program from SA WELL+ website to PC.
(b) After program installation, click on USB App and sign into the account.
If you hasn't registered, click "Sign Up" to link to SA WELL+ website for
creating an account or create an account via SA WELL+ App.
(c) If there is no user profile saved inside USB disk, the following window will
appear. Click "Select USB" to build the user profile for you. If user profile
has been saved inside USB disk, the following window will not appear.
27
(d) When there is workout data saved into USB disk, it will automatically
send to cloud server. A message of “Upload Success” will appear when
the workout data has sent to cloud server successfully and the data will
be deleted from the USB disk.
(e) USB requirement:
(1) Version 3.0 or below
(2) Compatible format: FAT16 and FAT32. (NTFS is not compatible.)
3.7 Check Uploaded Workout Data and Record
(a) Login your account at SA WELL+ official website.
http://sawellplus.gosportsart.com/sawellplus/result.html/
(b) Select Result page and click History Data to see details.
28
3.8 SA WELL+ SGwebUI Website
(a) SGWebUI is used for recording and managing the usage data of each
exercise equipment. Also, it can be used for tracking connection
information of each exercise equipment, recording user workout data
and maintenance history. Currently, this home page is compatible with
SportsArt GS products only. It can run online competition and record the
workout summary of competition.
(b) First time, please click “1st Login” key to enter your ID and password if
you'd like to transmit the workout data to the cloud sever. User information
will be saved into the account and no need to sign up again. Or click
“Offline Mode” to login, but the workout data will be saved into Mini PC
only and not be transmitted to the cloud sever.
29
3.9 Administrator Area
(a) Login
(1) Visit Administrator Area Web Address (http://sawellplus.gosportsart.
com/sawellplus_club/index.html) and login.
(2) Click "Asset Manager" and sign into the account. In addition, at the top
right hand corner of this page, you can change the display language
to your preferred language.
(b) The page will display Facility Data as below after logging. Click to see
details.
30
SA WELL+ SYSTEM STRUCTURE
1. BLUETOOTH SYSTEM STRUCTURE
SportsArt
Cloud Server
Ethernet
Internet
USB Disk
Router
WI-FI
3G/4G network
BT/BLE
Website Download APP
Smart phone
Computer
USB Disk
SportsArt Production
2. WIFI SYSTEM STRUCTURE
TV Screen
Mini PC
CAT5E
(Web wire)
Router
Website Download APP
SG
Software
CAT5E
(Web wire)
USB Disk
Computer
Internet
WI-FI
( 2.4G )
USB Disk
CAT5E
(Web wire)
Wireless Access Point
WI-FI
( 5G,Not encrypted)
WI-FI
( 5G,Not encrypted)
SportsArt
Cloud Server
※Data Flow Description:
Workout Data:Fitness Machine  SG  SportsArt Cloud
Server
●●●●●●●●
Smart phone (1~100 pieces)
SportsArt Production (1~100 pieces)
Usage Data:Fitness Machine  SportsArt Cloud Server
※ If the signal is too weak to connect (distance too far), we can
add AP for larger Broadcast range.
The SSID for Smart Phone to connect should be SportsArt_10
~ SportsArt_19, nor it cannot be connected.
31
2.1 Multiple AP Connection
Router
CAT5E
(Web wire)
CAT5E
(Web wire)
CAT5E
(Web wire)
Wireless Access Point 1
Wireless Access Point 2
Wireless Access Point 3
2.2 AP Coverage Area
AP can typically communicate with exercise equipment located within a
radius of 30 meters range without obstructions nearby.
32
2.3 Mini PC Connection
Wireless Access Point
Router
Power cable
LCD Screen or TV
Network cable
HDMI cable
Network
cable
Network cable
Mini PC
Power cable
Power cable
Power Button
(Power ON - LED will light)
Wireless
Keyboard
33
Mouse
3. DATA TRANSMITTION AND USER ID
3.1 SA WELL+ System Exercise Data
(a) Workout data
(b) Usage data (Available on WiFi Version only)
3.2 SA WELL+ System Bluetooth Version
The workout data will be transmitted from equipment to the smart phone via
Bluetooth function and then be uploaded to SportsArt cloud server via WiFi
or 3G/4G.
3.3 SA WELL+ System WiFi Version
(a) The workout data will be transmitted from equipment to Mini PC through
Wireless Access Point via WiFi function and then be recorded and
uploaded to SportsArt cloud server via router.
(b) The usage data will be transmitted from equipment to Wireless Access
Point via WiFi function and be uploaded to SportsArt cloud server via
router.
3.4 User ID
First time user must create an user account with SA WELL+ App or visit SA
WELL+ website to register. After sign up, user profile will be saved to your
smartphone or USB disk. Read the following instructions according to your
SA WELL+ System version.
(a) SA WELL+ System Bluetooth Version:
(1) Smartphone
User can use SA WELL+ App to sign up with your user ID to see your
workout data and upload the workout data to SportsArt cloud server.
(2) USB disk:
If there is user ID saved inside USB disk, the workout data will be
saved into USB disk. You can insert USB disk into your personal
computer to upload your workout data to SportsArt cloud server.
Note: If there is no user ID saved inside USB disk, the workout data
can be saved into USB disk still, but you have to build the user ID for
USB disk first if you want to upload your workout data to SportsArt
cloud server.
(b) SA WELL+ System WiFi Version:
(1) Smartphone
User can use SA WELL+ App to sign up with your user ID to see your
workout data and upload the workout data to SportsArt cloud server.
(2) USB disk:
If there is user ID saved inside USB disk, the workout data will be
transmitted to Mini PC and then be uploaded to SportsArt cloud
server according to your user ID saved inside USB disk.
Note: If there is no user ID saved inside USB disk, the workout data will
be not transmitted to Mini PC and will be not uploaded to SportsArt
cloud server as well.
34
sa well+ SYSTEM Wifi version Package
Factory No.
Name
Specification
Qty.
000020900
Mini PC
(2G/32G/W8)
ECS
[LIVA X]
1
000020910
Wireless
Keyboard
and Mouse
Combo
Logitech
MK240
1
000025410
Wireless
Router
TP-LINK
1
802.11ac/a/b/
Enterprise- g/n, 2x2 MIMO
Grade
Radios, 32
000025420
Indoor
SSIDs
Access Point
(Including
Power Supply)
1
000020930
1.4b HDMI to
HDMI
Length 1.8M
1
000060710
AP Box,
Gateway
Package
5mm
Corrugated
Paper A1 346
*296*90mm
1
35
SA WELL+ BLOCK DIAGRAM
USB Board
SA WELL+ Connection key
Continua Adapter Board
TO USB UART >>
Control Board
:Connector
:Converge
36
Your Authorized Distributor
37
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement