SportsArt T631 Owner Manual

SportsArt T631 Owner Manual
TABLE OF CONTENTS
CHAPTER 1: CARDIO ACTIVE ENTERTAINMENT STATION (INTEGRATED TV)
FOR THE T652 TREADMILL
1.1 INSTALLATION MANUAL..................................................................................
1
1.2 INSTALLATION INSTRUCTIONS.......................................................................
2
CHAPTER 2: CARDIO ACTIVE ENTERTAINMENT STATION (INTEGRATED TV)
FOR THE T621/T631 TREADMILL
2.1 INSTALLATION MANUAL.................................................................................... 19
2.2 INSTALLATION INSTRUCTIONS....................................................................... 20
CHAPTER 3: CARDIO ACTIVE ENTERTAINMENT STATION (INTEGRATED
ANALOG TV) OPERATING MANUAL
3.1 TV Operating Instructions................................................................................... 26
3.2 CATV Function Settings...................................................................................... 27
3.3 OSD Menu and Keys in CATV Mode.................................................................. 27
3.4 How to Perform the Search Function.................................................................. 30
3.4.1 Search Function Illustrations - TV System........................................................ 30
3.4.2 Ntsc Cable Illustration....................................................................................... 31
3.4.3 TV Scan............................................................................................................. 31
3.4.4 TV Channel Search in Progress........................................................................ 32
3.4.5 iPod Function.................................................................................................... 32
3.5.1 iPod Function Illustrations – iPod System......................................................... 33
3.5.2 iPod Function Illustrations – iPod ON................................................................ 33
3.5.3 iPod Function Illustrations – Source Key........................................................... 34
3.6.1 OSD Menu, Other Functions - Video................................................................ 35
3.6.2 OSD Menu, Other Functions - Audio................................................................. 36
3.6.3 OSD Menu, Other Functions - System.............................................................. 36
3.6.4 OSD Menu, Other Functions - DTV................................................................... 38
CHAPTER 4:CARDIO ACTIVE ENTERTAINMENT STATION – INTEGRATED
DIGITAL TV
4.1 Digital TV System Cable Connections................................................................. 40
4.2 Integrated TV Screen Illustration.......................................................................... 40
4.3 DTV(ATSC-USA)Digital TV Functions............................................................. 41
4.4 DTV Mode Operation........................................................................................... 43
4.4.1 DTV Mode......................................................................................................... 43
4.4.2 ATSC Menu....................................................................................................... 43
4.4.3 DTV Mode Key Definitions................................................................................ 43
4.5 Introduction to the ATSC Menu............................................................................ 44
4.6 Auto Search Operation......................................................................................... 44
4.6.1 DTV Menu......................................................................................................... 44
4.6.2 Scan Window.................................................................................................... 45
4.6.3 Channel Search Completed Window................................................................. 45
4.6.4 Channel Scan.................................................................................................... 47
4.7 DTV(DVB-T (European))Digital TV Functions................................................. 48
4.8 The System Setup Process.................................................................................. 50
4.8.1 Country Setting................................................................................................. 50
4.8.2 Channel Search................................................................................................ 54
4.8.3 Channel Search Block Diagram......................................................................... 54
4.9 Other Notes.......................................................................................................... 57
4.9.1 DVB-T Menu..................................................................................................... 57
4.9.2 Program Search................................................................................................ 57
4.9.3 Parental Control................................................................................................ 58
4.9.4 System Settings................................................................................................ 58
4.9.5 Games............................................................................................................... 59
4.9.6 Accessory.......................................................................................................... 59
4.9.7 Personal Style................................................................................................... 60
4.10 Setup Menu Navigation...................................................................................... 61
4.11 DVB-T Frequency Table and Country List.......................................................... 62
CHAPTER 1-CARDIO ACTIVE ENTERTAINMENT STATION
(INTEGRATED TV) FOR THE T652 TREADMILL
1.1 INSTALLATION MANUAL
1
1.2 INSTALLATION INSTRUCTIONS
Hardware Kit
No.
Part Name
Qty
No.
A7
A1
Integrated TV module
1
A2
Owner's manual
1
Lower cable(A3a)
1
TV lower power cord(A3b)
1
A4
TV power adaptor
1
A5
Adaptor power cord
1
A6
Terminal plate
1
A3
2
Part Name
Coaxial cable splitter
Qty
1
Components on the Product
Number
Qty
Name
Specification
Inner hex screw
4
M6*L15
Spring washer
4
M6
Serrated washer
4
D15*d6.5*t3.0
22
Mushroom top Phillips screw
2
M5*P0.8*L12
23
Zip tie
4
24
Phillips screw
4
M4*P0.7*L6
25
Mushroom top Phillips screw
2
M5*0.8*L12
26
Phillips screw
4
M4*P0.7*L6
Screwdriver bit and green handle
1
Flat and Phillips
L-shaped Allen wrench
1
M5
L-shaped Allen wrench
1
M6
M11 open-end wrench
1
21
Notes
The CardioActive™ Entertainment Station is an integrated TV station for use on several
SportsArt Fitness products. Please follow instructions below to install this integrated TV
station on the T652 treadmill. Complete this installation before connecting the treadmill
and the TV module to power.
Note that throughout this manual, the words “left” and “right” are used in reference to
the product and its part. As such, these designations correspond to the left and right
sides of a person in position to operate this product. Also note that, for brevity, the word
screws is used where screws, washers, and other hardware may be involved.
Please note that SportsArt products use two types of boards for iPod® devices. One
board has audio-only functions. The other board has audio-video functions. Only the
audio-video board is suitable for use with the integrated TV module. Do not use the
audio-only board with the integrated TV module.
Note: iPod is a trademark of Apple Inc., registered in the US and other countries.
“Made for iPod” means that an electronic accessory has been designed to connect
specifically to iPod and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
3
STEP 1
Remove Covers
To access the motor compartment, remove covers as explained in steps (a) through (d)
below.
(a) Remove power cord screws. Remove the power cord.
(b) Remove covers at the base of the left and right pedestals. Loosen but do not
remove screws at the base of left and right pedestals.
(c) Remove the caps in area (A). Loosen screws in that area. Remove screws in the
upper cover, and remove the upper cover (B). Then remove screws in the front
cover, and remove the front cover (C).
(d) Use wire cutters to cut away area (A) in the front cover.
4
STEP 2
Install the Adapter
Install the adaptor and its cord as explained in steps (a) through (c) below.
(a) Use screws (25) to secure the adaptor to the treadmill frame.
(b) Note the original position of N and L wire connections on the power switch. Gently
compress the sides of the power switch and push the power switch outward, away
from the treadmill body.
Detach one wire between the filter and the power switch. From cable (A5), connect
the appropriate wire into the position of the wire you just removed. Detach the other
wire between the filter and the power switch. From cable (A5), connect the
appropriate wire into the position of the wire you just removed. After the wires are
connected securely, insert the power switch back into place as shown.
(a)
(b)
5
STEP 2
Install the Adapter (Continued)
(c) Secure the ground wire of cable (A5) and the filter ground wire together as shown.
Insert the plug into the adaptor (A4) as shown.
(c)
6
STEP 3
Remove the Cutaway
Cut out the cutaway in the display lower cover as explained in steps (a) through (b)
below.
(a) Remove screws from the lower cover.
(b) Peel off the sticker in the lower cover. Then cut out the cutaway in area (A) of the
display lower cover.
7
STEP 4
Detach the Display Upper Cover and Disconnect Cables
Disconnect the display upper cover as explained in steps (a) through (b).
(a) Disconnect cables on the display board as shown, and detach the display upper
cover.
(b) Cut the zip tie off the bracket for iPod. Disconnect the three cables as shown.
8
STEP 5
Detach the Handlebar Cowling and Disconnect Cables
Install integrated TV module cables as explained in steps (a) through (d) below.
(a) First, remove screws in areas (A) and (B) on left and right pedestals.
(b) Slightly lift the handlebar assembly. Insert an L-shaped 5-mm Allen wrench into the
space in the left side of the handlebar assembly. This will prop up the handlebar
assembly, leaving space with which to direct cables on the left side.
(a)
B
A
B
(b)
9
STEP 5
Detach the Handlebar Cowling and Disconnect Cables (Continued)
(c) Into the hole in the middle of the handlebar assembly, insert the plastic wrapped
end of cable (A3). Feed the cable toward the left side of the handlebar assembly.
When the lower end of cable (A3) nears the hole in the handlebar frame, feed
cable (A3)through the hole in the handlebar frame and into the pedestal.Stop
feeding cable (A3) downward when thelower end reaches the floor of the motor
compartment and the sticker on the cable meets your hand on the upper end.
(d) Finally, pull the lower end of cable (A3) out of the bottom of the pedestal. Feed the
cable (A3) into the motor compartment and secure it with zip ties (23) as shown.
Note: Secure the zip ties to the inner frame to avoid obstructing screw holes.
(d)
(c)
A
10
STEP 6
Install the TV Cable Terminal Plate
Install the TV cable terminal plate and cables as shown in steps (a) through (b) below.
(a) Before installing the cable terminal plate (A6), first select the metal terminal bracket
that belongs on this product. Then use screws (26) to secure the terminal plate onto
the metal bracket.
(b) Use an open-end wrench to secure cable (A3b) to the adapter (A4) cable. Connect
cable (a3a) to the integrated TV terminal plate (A6). Then use screws (24) to secure
the TV terminal plate bracket (A6) to the inside of the treadmill frame as shown.
Note: After connecting cable (A3b) to the adapter (A4) cable, push the plastic
sheath on cable (A3b) to completely cover the connection area. Use zip ties (23) to
secure the cable.
(a)
(b)
11
STEP 7
Install Motor Covers and the Power Cord
Installcovers, the pedestal, and the power cord as shown in steps (a) through (f) below.
(a) First, remove the L-shaped Allen wrench from the handlebar assembly, and insert
the handlebar assembly into the pedestal.
(b) Secure screws that were removed previously, starting with area (A), then proceeding
to area (B).
(c) After securing the handlebar assembly, secure motor front cover©.
Then secure the motor upper cover (D).
12
STEP 7
Install Motor Covers and the Power Cord (Continued)
Secure pedestals and the power cord as shown in steps (d) through (f).
(d) Secure left and right pedestal screws.
(e) Install pedestal base covers on left and right sides.
(f) Finally, secure the power cord into place.
(d)
(e)
(f)
13
STEP 8
Install the Integrated TV Module
Install the integrated TV module as shown in steps (a) through (f) below.
(a) (a) Make sure that the ring is in place on the integrated TV screen neck. Carefully
aim the TV module guide tubes through the holes in the display lower cover. At the
same time, feed integrated TV module cables through the hole.
(b) First secure screws (21) in area (A). Then secure screws in area (B). After securing
the TV module cables, carefully cut the zip tie to free the cables.
14
STEP 8
Install the Integrated TV Module (Continued)
(c) First, connect cable (L1) from the integrated TV module to cable (A3) from below.
Connect the CATV and DTV coaxial cables from the integrated TV module to the
output connectors on the coaxial cable splitter (A7). Connect the lower coaxial cable
to the input connector on the coaxial cable splitter. Use screws (22) to secure the
coaxial cable splitter (A7) into place. Use screw (22) to connect the ground wire
from the integrated TV module cable (L2) to the coaxial cable splitter (A7) as shown.
Loosen the cable clip screw on the coaxial cable splitter (A7). Collect cables in into
the clip, and secure its screw. (Note: Make sure that cables do not obstruct the
standoffs for display screws.)
(c)
15
STEP 8
Install the Integrated TV Module (Continued)
(d) Only carry out this step, (d), if the option kit for iPod is installed on this product. If
not, skip this step.Insert the integrated TV module cables (L2)into connectors on the
board foriPod.
(e) Insert integrated TV module cables (L3) into earphoneboardsas shown.
(f) Finally, connect display cables that were disconnected previously, and close the
upper cover onto the lower cover.
(e)
(d)
(f)
A
B
C
16
STEP 9
Secure Neck Covers
Secure the integrated TV module neck cover as shown in steps (a) through (c).
(a) First remove screws from the integrated TV module neck cover. Then remove the
cover.
(b) Secure the display cover with the screws that were previously removed.
(c) Make sure that the integrated TV module neck cover tucks neatly inside the treadmill
display top cover at area (A). Then use screws to secure the integrated TV neck
cover.
17
STEP 10 TV Screen Angle Adjustment
To secure the angle of the TV screen at its recommended position, follow instructions
on the sticker (inside the neck cover). To secure the TV screen angle at a different
position, follow steps (a) through (d) below.
(a) Remove the integrated TV module neck cover.
(b) Remove the screws at the lower left and right sides of the bracket. Loosen (but do
not remove) screws in position (A) until the angle of the TV screen can be adjusted.
(c) After adjusting the angle of the integrated TV screen, secure screws in area (A).
While aligning screw holes, secure other screws that were removed in step (b).
(d) Fit the integrated TV module neck cover to mesh inside the display top cover in area
(B). Then secure the integrated TV module neck cover with its screws.
18
CHAPTER 2-CardioActive™ Entertainment Station
(Integrated TV) for the T621/T631 Treadmill
2.1 INSTALLATION MANUAL
Installation Instructions for the CardioActive™ Entertainment Station (integrated
TV module) on the T621 and T631 Treadmill
19
2.2 INSTALLATION INSTRUCTIONS
STEP 1
Remove covers
Remove covers as instructed in page four of the T652 integrated TV module installation
manual.
STEP 2
Remove covers
Remove covers as follows.
(a) First, remove screws that secure the power supply cord in place. Then remove the
power cord.
(b) Remove motor side covers. Then slightly loosen but do not remove pedestal screws
A, allowing pedestals to wobble.
(c) Remove the motor upper cover. Use wire cutters to cut out area B in the motor
upper cover.
(d) Finally, remove pedestal screws in locations C and D.
20
STEP 3
Install the Adaptor
Install the adapter and its cable connections as follows.
(a) Use screws (25) to secure the adaptor (A4) into place.
(b) Remove power switch bracket screws. Note the position of N and L wires. While
holding the power switch bracket away from the treadmill, remove filter and power
switch cables. Connect cables (A5) while paying special attention to the N and L
wire placement. Re-install the power switch bracket.
(c) Secure the ground wires from cable (A5) and the filter together with one screw.
Connect cables to the adapter (A4) as shown. Use zip ties (23) to secure cables.
For reference, please see pages 7 through 10 of the T652 integrated TV installation
manual.
21
STEP 4
Install the Terminal Plate
Install the integrated TV module terminal and cables as follows.
(a) Pull cables (A3a) out of the pedestal. Feed them through the hole in the frame.
(b) Before installing the TV cable terminal plate (A6), select the metal bracket to
match your unit. Use screws (26) to secure the terminal plate onto the metal
bracket.
(c) Peel the tape off cable (A3). Secure cable (A3b) to the adapter (A4) cable, and
use the open-end wrench to secure cable (A3a) to the integrated TV terminal (A6).
Then use screws (24) to secure the integrated TV cable terminal plate (A6) to the
treadmill as shown. Note: After connecting the adapter (A4) cable to cable (A3b),
push the plastic sheath forward to cover the connection.
(d) Organize the cables. Then secure them together with a zip tie (23).
(a)
(b)
(c)
(d)
22
STEP 5
Install Motor Covers
Install motor covers as shown in steps (a) through (e) below.
(a) First, remove the L-shaped Allen wrench from the handlebar assembly, and insert
the handlebar assembly into the pedestal.
(b) Secure screws in area A. Then secure screws in area B.
(c) After securing the handlebar assembly, secure the motor upper cover into place.
(d) Secure pedestal screws in area C. Then secure the power cord connection.
(e) Secure motor left and right covers.
23
STEP 6
Screen Angle Adjustment
To adjust the screen angle, please refer to pages 14 through 18 in the T652 integrated
TV module installation instructions.
24
CHAPTER 3-
CardioActive™ Entertainment Station
– Integrated Analog TV
Operating Manual
25
CHAPTER 3-CARDIO ACTIVE ENTERTAINMENT STATION
(INTEGRATED ANALOG TV)
3.1 TV Operating Instructions
Power
switch
Power LED
1. Press the POWER key to turn on the unit. A green LED on the power switch will light
up. (A red LED lights when the unit is not activated.)
2. Wait for the TV screen to light.
3. After turning on, if the screen shows “Video Loss”, there is no input signal.
4. Press the Source key to select your input. TV signal sources include CATV,
iPod, and DTV. Among these sources, iPod and DTV are options.
5. Press VOL+/- keys as shown to adjust volume. After you set the volume, the
volume window will disappear.
6. Press CH+/- keys as shown to select a channel.
7. The On Screen Display (OSD) menu provides a means to establish settings for
brightness, contrast, color saturation, TV scan, and other settings.
26
3.2 CATV Function Settings
Connect the analog source cable as shown in Figure (1). Press the source key until
「CATV」 appears in the upper left corner, as shown in Figure (2).
3.3 OSD Menu And Keys in CATV Mode
In the CATV mode, after pressing the MENU key, the OSD menu will appear, and key
definitions will change.
(a) In the main OSD window:
˙The MENU key will become the OK key, used for confirmation.
˙The CH+/- key will become the UP/DOWN key.
˙The VOL- key will become the EXIT key.
*If no keys are pressed, the OSD screen will disappear. You can also press the
Vol-key to exit the OSD menu.
27
(b) In the secondary OSD window:
˙The MENU key will become the OK key, used for confirmation.
˙The CH+/- key will become the UP/DOWN key.
˙The VOL- key will become the EXIT key.
*If no keys are pressed, the OSD screen will disappear. You can also press the
VOL-key to return to the main OSD window.
(c) In the OSD adjustment window:
˙The VOL-/+ key will become the value decrease/increase key.
˙The MENU key will become the OK key.
*If no keys are pressed for a period of time, or if you are finished making
adjustments, press the MENU (OK) key to return to the main OSD window.
OSD Main Window
Video Setting
Brightness
50
Contrast
50
Saturation
50
Hue
50
Sharpness
50
Image H position
Image V position
Default
28
OSD Secondary Window
Video Setting
OSD Adjustment
Brightness
Example 2
Image H position
Image V position
29
3.4 How to Perform the Search Function
1. Press the MENU key to enter the OSD window.
2. Press the CH- key to select the SYSTEM setting function.
3. Press the OK (MENU) key to enter the system setting mode.
4. Press the CH- key to select the TV system.
5. Press the OK (MENU) key to enter the TV System setting mode.
6. Press the CH+/- key to select NTSC Cable, PAL B/G, or other modes. After
making your selection, press the VOL- key to return to the TV System selection.
7. Press the CH- key to choose the TV Scan.
8. Press the OK (MENU) key to start the scan function. Scanning can take a long
time. Please wait while the scan is being performed.
3.4.1
Search Function Illustrations - TV System
SYSTEM SETTING
30
3.4.2
NTSC Cable Illustration
SYSTEM SETTING
NTSC Cable
3.4.3
TV Scan
SYSTEM SETTING
31
3.4.4
TV Channel Search in Progress
3.4.5
iPod Function
When you have purchased and installed the iPod option but cannot activate iPod
functions via the Source key, please use the following procedure to activate these
functions.
1. Press the Source key to select the CATV mode.
2. Press the MENU key to enter the main OSD MENU window.
3. Press the CH- key to select the System Setting function.
4. Press the MENU (OK) key to enter the secondary System Setting window.
5. Press the CH- key to choose the iPod System.
6. Press the MENU (OK) key to enter the iPod System setting function.
7. Press the CH+/- key to select ON, turning on the iPod function.
8. Continually press the VOL- key to exit the OSD MENU.
32
3.5.1
iPod Function Illustrations – iPod System
SYSTEM SETTING
3.5.2
iPod Function Illustrations – iPod ON
SYSTEM SETTING
AspecRatio
Full Screen
Color Temperature
6500k
Channel Display
ON
Language
English
TV System
NTSC Cable
TV Scan
▶
DTV System
Off
iPod System
ON
33
3.5.3
iPod Function Illustrations – Source Key
Connect the iPod. Press the Source key until「iPod」appears in the upper left
corner.
iPod
Menu
Vol-
Vol+
Ch-
Ch+
Source
Power
Note: When the TV is not on, you can listen to music on the iPod.
˙If you press the VOL+/- key,you can turn on the TV to see the iPod image screen.
˙If you press the TV power switch, the TV will turn on. After the startup screen
appears, iPod mode will begin. You can directly use iPod audio/visual functions.
34
3.6.1
OSD Menu, Other Functions - Video
Video setting functions include the following:
˙Brightness adjustment
˙Contrast adjustment
˙Saturation
˙Hue
˙Sharpness
˙Image H position (horizontal picture adjustment)
˙Image V position (vertical picture adjustment)
˙Default (factory setting)
Video Setting
Brightness
50
Contrast
50
Saturation
50
Hue
50
Sharpness
50
Image H position ▶
ImageV position
▶
Default
▶
35
3.6.2
OSD Menu, Other Functions - Audio
Audio setting functions include the following:
˙Volume
˙Mute
Audio Setting
Volume
Mute
3.6.3
5
Off
OSD Menu, Other Functions - System
System setting functions include the following:
˙Aspect ratio
˙Color temperature
˙Channel display -- OSD MENU display
˙Language selection
˙TV system selection (NTSC, PAL…)
˙TV scan
˙DTV SYSTEM, digital system selection (ATSC, DVBT, ISDBT, Off), if you
purchased this option.
˙iPod System selection (ON, Off), if you purchased this and activated this option
via system settings.
36
SystemSetting
AspecRatio
Full Screen
Color Temperature
6500k
Channel Display
ON
Language
English
TV System
NTSC Cable
TV Scan
▶
DTV System
Off
iPod System
ON
37
3.6.4
OSD Menu, Other Functions - DTV
When you have purchased and installed the DTV option but cannot activate DTV
functions via the Source key, please use the following procedure to activate these
functions.
1. Press the Source key to select the CATV mode.
2. Press the MENU key to enter the main OSD menu.
3. Press the CH- key to select the System Setting function.
4. Press the MENU (OK) key to enter the secondary System Setting window.
5. Press the CH- key to select DTV System.
6. Press the MENU (OK) key to enter the DTV System setting function.
7. Press the CH+/- key to select DTV mode (ATSC/DVBT).
8. Continually press the VOL- key to exit the OSD menu.
Connect the digital TV signal cable (or wireless antenna) as shown in Figure 3. Press
the Source key to select the DTV mode until 「DTV」appears in the left upper corner
as shown in Figure 4.
For DTV usage, please refer to the integrated TV digital TV option manual.
Antenna
TV
DTV
Menu
Vol-
Vol+
Ch-
Ch+
38
Source
Power
CHAPTER 4-
CardioActive™ Entertainment Station
– Integrated Digital TV
Operating Manual
39
CHAPTER 4-CARDIO ACTIVE ENTERTAINMENT STATION
(INTEGRATED DIGITAL TV)
Integrated digital TV is optional and may not be included in your particular
model. If your treadmill is equipped with these functions, please note the following.
OPERATING INSTRUCTIONS
4.1 Digital TV System Cable Connections
Connect cables for digital TV signal reception as follows. Connect the digital TV cable
antenna.
Note: Also follow these instructions if, in your area, over-the-air analog and digital
signals are simultaneously supported.
Antenna
4.2 Integrated TV Screen Illustration
Menu
Vol-
Volume
adjustment
Vol+
Ch-
Ch+
Channel
selection
Source
Source selection
40
Power
Power
Indicator LED
switch
4.3 DTV(ATSC-USA)Digital TV Functions
Follow instructions below to activate the On Screen Display (OSD) MENU for the DTV
system:
1. Press the Source key until DTV appears in the upper left corner of the TV screen.
2. Press the MENU key to enter the OSD window.
3. Press the CH- key to select the SYSTEM setting function.
4. Press the OK (MENU) key to enter the system setting mode.
5. Press the CH- key to select DTV System.
6. Press the OK (MENU) key to enter the DTV System setting mode.
7. Press the CH+/- key to select ATSC mode. After making the selection, press the
VOL- key to return to the DTV System selection. Then press the VOL- key again to
return to the SYSTEM Setting. Then press the VOL- key to exit the OSD window.
DTV
Menu
Vol-
Vol+
Ch-
Ch+
Source
System Setting
AspecRatio
Full Screen
Color Temperature
6500k
Channel Display
ON
Language
English
TV System
NTSC Cable
TV Scan
DTV System
Off
iPod System
Off
41
Power
System Setting
AspecRatio
Full Screen
Color Temperature
6500k
Channel Display
ON
Language
English
TV System
NTSC Cable
TV Scan
DTV System
ATSC
iPod System
Off
42
4.4.1
DTV Mode
Press the Source key to select DTV mode.
DTV
Menu
4.4.2
Vol-
Vol+
Ch-
Ch+
Source
Power
ATSC Menu
In the DTV mode, hold the Source key for five seconds to enter the ATSC digital TV
system menu.
Main Menu
Auto Search
CH setup
CC setup
Parental control
System setting
Version Information
Menu
4.4.3
Vol-
Vol+
Ch-
Ch+
Source
Power
DTV Mode Key Definitions
In DTV mode, key definitions change as follows:
˙The CH+ key will become the UP key.
˙The CH- key will become the DOWN key.
˙The VOL+ key will become the RIGHT key.
˙The VOL- key will become the LEFT key.
˙The Source key will become EXIT key.
˙The MENU key will become the OK key, used for confirmation.
43
.
4.5 Introduction to the ATSC Menu
Auto search includes the following functions:
˙Source Type allows selection of source, either antenna or cable.
˙Start Search begins channel search.
˙Reset resets to factory default settings.
˙SNR (signal to noise ratio).
4.6 Auto Search Operation
4.6.1
DTV Menu
Hold the Source key for five seconds to enter the DTV Menu. From the DTV Menu,
select Auto Search. Press the MENU(OK) key to select Source Type from the
DTV Menu. Press the MENU(OK) key to select Antenna. Press the CH- key to
choose the Start Search function from the DTV Menu. Then press the MENU
(OK)key to enter the channel scan function. After channel scan is completed, the
channel scan completion message will appear. Please wait for this message to
disappear. Then be sure to press the Source(EXIT)key to ensure that keys
resume their original functions. The scan function takes some time. Please wait
patiently for the scan function to be completed.
From menu,
select Auto
Search
MENU
MENU
CH-
MENU
Press to
Press to
confirm auto confirm source Go down to
is cable/antenna. start search.
search.
Auto Search
Source type
Start Search
Reset
SNR
Menu
Vol-
Vol+
Press to confirm
scan mode
activation.
Antenna
▶
0.00dB
Ch-
Ch+
44
Source
Enter scan
mode
Power
4.6.2
Scan Window
Searching Digital channels
Source type [Antenna]
Searching is in process now
Please wait…..
To stop press [EXIT]
5%
Found 0 Digital channels
Menu
4.6.3
Vol-
Vol+
Ch-
Ch+
Source
Power
Channel Search Completed Window
Channel Search Completed
Found ** Digital channels
This screen will automatically
disappear.
Menu
Vol-
Vol+
Ch-
Ch+
45
Source
Power
DTV Screen
Menu
Vol-
Vol+
Ch-
Ch+
Source
Power
Note: After the channel scan is completed, please press the Source key to ensure that
keys resume their original functions. During the channel scan process, do not press any
keys. Otherwise, the scan process might malfunction.
Note: In DTV mode, if the channel scan message appears automatically, hold the
Source key for five seconds. (The screen will show no reaction whatsoever). Release
the Source key. Then use VOL+/- to select YES/NO, with YES being confirmation to
begin the channel scan function.
Menu
Vol-
Vol+
Ch-
Ch+
46
Source
Power
4.6.4
Channel Scan
After selecting the YES key, the channel scan window appears as below.
Searching Digital channels
Source type [Antenna]
Searching is in process now
Please wait…..
To stop press [EXIT]
5%
Found 0 Digital channels
Menu
Vol-
Vol+
Ch-
Ch+
Source
Power
Note: During the channel scan process, please do not press any keys. Otherwise, the
scan process might error.
Note: In the DTV Menu, if you do not press any keys, within approximately 15 seconds,
the screen will revert back to the main DTV screen. When the system reverts to the
main DTV screen, press the Source(EXIT)key once to exit the DTV MENU control.
Keys will resume their original functions.
47
4.7 DTV(DVB-T (European))Digital TV Functions
Note DTV SYSTEM OSD MENU operation:
1. Press the Source key until DTV appears in the upper left corner.
2. Press the “MENU” key to enter the OSD window.
3. Press the CH- key to select the SYSTEM Setting function.
4. Press the OK (MENU) key to enter the system setting mode.
5. Press the CH- key to select DTV System.
6. Press the OK (MENU) key to enter the DTV System setting mode.
7. Press the CH+/- key to select DVBT mode. After selecting DVBT mode, press the
VOL- key to return to the DTV System setting. Then press the VOL- key to return to
the SYSTEM Setting. Then press the VOL- key to exit the OSD menu.
DTV
Menu
Vol-
Vol+
Ch-
Ch+
Source
System Setting
AspecRatio
Full Screen
Color Temperature
6500k
Channel Display
ON
Language
English
TV System
NTSC Cable
▶
TV Scan
DTV System
ATSC
iPod System
Off
48
Power
System Setting
AspecRatio
Full Screen
Color Temperature
6500k
ON
Channel Display
English
Language
NTSC Cable
TV System
TV Scan
DTV System
DVBT
iPod System
Off
In DTV mode, hold the Source key for 5 seconds until the DVB-T digital TV system
menu appears.
Main Menu
Program List
Program Search
Parental Control
System Setting
Accessory
Personal Style
Menu
Vo l -
Vol+
Ch-
Ch+
Source
Power
Key Illustration (remote)
In the DTV Menu mode, key definitions are as follows:
▲CH+
˙The CH+ key becomes the UP key.
VOL-◀ ●
(ok)▶VOL+
˙The CH- key becomes the DOWN key.
▼CH˙The VOL+ key becomes the RIGHT key.
◆ Source(Exit)
˙The VOL- key becomes the LEFT key.
˙The MENU key becomes the OK key, used for confirmation.
˙The Source key becomes the EXIT key.
49
4.8 The System Setup Process
The system setup includes two steps: establishing the country setting, and establishing
the OSD language setting.
4.8.1
Country Setting
The DVB-T system has 3 types of frequencies: 6/7/8MHz. Different signals are used in
different areas, so during initial setup, country code must be established, before the
channel scan process can be performed.
Follow instructions below to establish the country setting:
1. Hold the Source key for five seconds until the DTV Menu appears.
2. Select the System Setting. Press the MENU ( OK) key.
3. Select Regional Setting, then press the MENU ( OK) key.
4. The Regional Setting menu appears. At Country, press VOL+ or VOL- key to select
your country.
Countries include TWN (Taiwan), Vietnam, Deutschland, England, Italia, France,
Espana, Nederland, Australia, and China.
Note: If your country is not included in the list of countries, please refer to the DVB-T
Frequency Table and Country List. For example, the country Poland has an 8 MHz
regional setting. Because Poland is not listed, simply choose a country with a similar
setting, for instance Holland or Spain.
5. The OSD language will change according to the country selected. Select the
appropriate country to aid in DTV Menu operation. After establishing country and
OSD language settings, press the MENU ( OK) key. Note: OSD languages include
English, French, German, Italian, Spanish, Portuguese, and Dutch.
6. After making selections, press the Source (Exit) key to exit the DTV MENU control.
Keys resume their original functions.
Note: Country and OSD language settings must only be established once.
Country Setting Block Diagram
Select
System
Setting from
DVBT menu
MENU
CH-
Confirmation
Select
Regional
Setting
MENU
Press
VOL+
Confirmation to
enter regional
Select OSD
setting
language
50
MENU
Confirm
Source
Exit system
Main Menu
Program List
Program Search
Parental Control
System Setting
Accessory
Personal Style
Menu
Vol-
Vo l +
Ch-
Ch+
Source
Power
Source
Power
System Setting
TV Standard
Display Type
Video Output
Antenna Power
Regional Setting
Language
Time Setting
System Schedule
Menu
Vol-
Vo l +
Ch-
Ch+
51
Regional Setting
Country
TWN
OSD Language English
Time Zone GMT+8:00
Use VOL+ or VOLto select country.
Menu
Vol-
Vol+
Ch-
Ch+
Source
Power
Regional Setting
Country
TWN
OSD Language
English
Time Zone
GMT+8:00
Use VOL+ or VOLto select OSD
language.
Menu
Vol-
Vol+
Ch-
Ch+
52
Source
Power
DTV
Press Source (Exit) to exit DTV
MENU.
Menu
Vol-
Vol+
Ch-
Ch+
Source
Power
Note: At this point, to establish other DTV system settings, or if you need to redo
settings, hold the Source key for five seconds until the DTV Menu appears. Then follow
instructions above.
Note: If the initial setting wizard appears during a workout, cancel the wizard as follows:
1. Please hold the Source key for five seconds until the wizard screen
disappears.
2. Release the Source key. Press the Source (Exit) key to exit the setting
procedure. Keys will resume their original functions.
DTV
First Time Installation
Do you want to start first time installation
Wizard?
Menu
Vol-
Vol+
Ch-
Ch+
53
Source
Power
4.8.2
Channel Search
Follow instructions below to perform a channel scan.
1. Hold the Source key for five seconds to enter the DTV Menu.
2. Select Program Search. Then press the MENU(OK) key to confirm your choice.
3. After entering the Program Search menu, select Automatic Search.
4. The following message appears: Do you want to start Auto Search? Select OK (by
first pressing VOL- and pressing MENU).
5. The following message appears: Do you want to erase your previous channel list?
Select YES (by first pressing VOL- and pressing MENU).
6. The channel scan window appears. During the channel scan procedure, do not press
any key. Otherwise, an error will occur.
7. After channel scan process is completed, the DTV screen appears. Press the Source
(Exit) key to leave the DTV MENU control. Keys resume their original functions.
4.8.3
Channel Search Block Diagram
EnterMenu
select
Program
Search
MENU
Enter
Program
Search
menu
MENU
MENU
VOL-
Select
Select OK
Automatic
Search
Confirm
VOL-
Select
YES
MENU
Confirm
Main Menu
Program List
Program Search
Parental Control
System Setting
Accessory
Personal Style
Menu
Vol-
Vol+
Ch-
Ch+
54
Source
Power
Start search
Program Search
Automatic Search
Manual Search
Menu
Vol-
Ch-
Vol+
Ch+
Source
Power
Source
Power
Source
Power
Do you want to start Auto Search?
OK
Menu
Vol-
Cancel
Ch-
Vol+
Ch+
Do you want to erase
your previous channel list?
YES
Menu
Vol-
Vol+
No
Ch-
Ch+
55
Automatic Search
Progress
XX%
Channel No XX
Menu
TV List: XXX
Music List: XXX
XXX
XXX
XXX
XXX
XXX
XXX
Vol-
Vol+
Ch-
Ch+
Source
Power
DTV Screen
Menu
Vol-
Vol+
Ch-
Ch+
56
Source
Power
4.9 Other Notes
4.9.1
DVB-T Menu
Program List includes the following:
1. TV Program List
2. Music Program List
3. Sort
a. By name
b. By Service ID
c. By Channel
Program List
TV Program List Music
Program List
Sort
Menu
4.9.2
Vol-
Vol+
Ch-
Ch+
Source
Power
Program Search
Program Search includes the following functions:
1. Automatic Search (This is the recommended channel scan program).
2. Manual Search
Program Search
Automatic Search
Manual Search
Menu
Vol-
Vol+
Ch-
Ch+
57
Source
Power
4.9.3
Parental Control
˙This program is not activated because it requires a password.
˙Channel lock
˙Parental Setting (Restricts channels)
˙Change Pin (Change the pin number)
Parental Control
Channel lock
Parental Setting
Change Pin
Menu
4.9.4
Vol-
Vol+
Ch-
Ch+
Source
Power
System Settings
System settings include the following:
˙TV Standard (Includes PAL, NTSC, and AUTO)
˙Display Type (Includes 4:3 PS, 4:3LB, 16:9)
˙Video Output (CVBS+S-Video)
˙Antenna Power (provides active antenna power supply)
˙Regional Setting
˙Language: OSD selection (Includes English, French, German, Italian, Spanish,
Portuguese, Dutch)
˙Time Setting
˙System Schedule (system time)
Parental Control
TV Standard
Display Type
Video Output
Antenna Power
Menu
Vol-
Vol+
Ch-
Ch+
58
Source
Power
4.9.5
Game
Game selections include the following:
˙Mine
˙Tetris
˙Gomoku
˙Calendar
Game
Mine
Tetris
Gomoku
Calendar
Menu
4.9.6
Vol-
Vol+
Ch-
Ch+
Source
Power
Ch+
Source
Power
Accessory
Accessories include the following:
˙System information (version number)
˙Factory Default
˙System Update (software update)
Game
System information
Factory Default
System Update
Menu
Vol-
Vol+
Ch-
59
4.9.7
Personal Style
Personal style settings include the following:
˙Menu Color
˙Transparency Level
˙Border Pattern
˙Entry Animation
Personal Style
Menu Color
◀ Blue
Transparency Level 6
Border Pattern
Round
Entry Animation
Right
Menu
Vo l -
Vo l +
Ch-
Ch+
60
▶
Source
Power
4.10 Setup Menu Navigation
Program List
TV Program List
Music Program List
Sort
Sort
▶
Program Search
By Name
By Service ID
By Channel No.
YES
NO
Automatic Search
Manual Search
TV Standard
PAL
Parental Control
NTSC
Channel Lock
Parental Setting
Change Pin
▶
▶
▶
▶
▶
▶
▶
TV Standard
Display Type
Video Outpu t
Antenna Power
Regional Setting
Language
Time Setting
System Schedule
AUTO
Display Type
4:3 PS
4:3 PS
16:9
System Setting
Main Menu
Program List
Program Search
Parental Control
System Setting
GAME
Accessory
Personal Style
▶
▶
▶
▶
▶
Video Output
CVBS+S-Video
Antenna Power
OFF
ON
Game
Mine
Tetris
Gomoku
Calendar
Regional Setting
Country
◀ TWN ▶
OSD Language English
Time Zone GMT+8:00
Accessory
System Information
Factory Default
System Update
▶
▶
Personal Style
Menu Color
◀ Blue ▶
Transparency Level 6
Border Pattern
Round
Entry Animation Right
Language
OSD Language
◀English▶
1st Audio Language English
2nd Audio Language English
DVB Subtitle
English
Time Setting
GMT usage
◀ ON ▶
Time Zone GMT+8:00
Factory Default
NO
YES
61
4.11 DVB-T Frequency Table and Country List
Band Switch
6M
Country
Argentina
阿根廷
Taiwan
台灣
177.0
VHF
213.0MHz
X
UHF
473.0~803.0MHz
Australia
澳大利亞
177.5
226.5 MHz 529.5
816.5 MHz
Deutschland
德國
177.5
226.5 MHz 474.0
858.0 MHz
8M
Belgium
Finland
Ireland
Netherlands
Norway
Poland
Portugal
Russian
Singapore
Slovenia
Spain
Sweden
Vietnam
比利時
芬蘭
愛爾蘭
荷蘭
挪威
波蘭
葡萄牙
俄羅斯
新加坡
斯洛維尼亞
西班牙
瑞典
越南
X
X
X
X
X
X
X
X
X
X
X
X
X
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
802.0 MHz
8M
Austria
China
Czech
Denmark
Estonia
France
Hungarian
Icelandic
Italy
Latvia
Lithuania
Switzerland
England
奧地利
中國
捷克
丹麥
愛沙尼亞
法國
匈牙利
冰島
義大利
拉脫維亞
立陶宛
瑞士
英國
X
X
X
X
X
X
X
X
X
X
X
X
X
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
474.0
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
858.0 MHz
7M
7M
8M
PS: Bold characters represent countries included in the DVB-T system.
62
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement