RailKing 30-7727 Steel Caboose Operator’s Manual

RailKing 30-7727 Steel Caboose Operator’s Manual
Service & Warranty Information
How to Get Service Under the Terms of the Limited One-Year Warranty
When you suspect an item is defective, please check the operator's manual for standard operation and troubleshooting techniques that may correct the problem. Additional information may be found on the M.T.H. Website.
Should you still require service, follow the instructions below to obtain warranty service.
First, e-mail, write, call or fax M.T.H. Electric Trains or a M.T.H. Authorized Service Center (ASC) in your area
to obtain Repair Authorization. You can find the list of ASCs on the M.T.H. Website, www.mth-railking.com.
Authorized Service Centers are required to make warranty repairs on items sold only from that store; all other
repairs may-- or may not be done at the store's own discretion. If you did not purchase the item directly from
the ASC, you will need to select a National Authorized Service Center (NASC) or contact M.T.H. Electric Trains
directly. NASC Dealers are compensated by M.T.H. to perform warranty service for any customer whose repair
qualifies for warranty service. A list of NASC retailers can be located on the M.T.H. Website or by calling 410381-2580. Should the warranty no longer apply, you may choose either an ASC or NASC retailer to service your
M.T.H. Product. A reasonable service fee will be charged.
CAUTION: Make sure the product is packed in its original factory packaging including its foam and plastic
wrapping material to prevent damage to the merchandise. There is no need to return the entire set if only one
of the components is in need of repair unless otherwise instructed by the Service Center. The shipment must be
prepaid and we recommend that it be insured. A cover letter including your name, address, daytime
phone number, e-mail address (if available), Return Authorization number (if required by the service
center, a copy of your sales receipt and a full description of the problem must be included to facilitate
the repairs. Please include the description regardless of whether you discussed the problem with a
service technician when contacting the Service Center for your Return Authorization.
Please make sure you have followed the instructions carefully before returning any merchandise for service.
Authorized M.T.H. Service Centers are independently owned and operated and are not agents or representatives
of M.T.H. Electric Trains. M.T.H. assumes no responsibility, financial or otherwise, for material left in their
possession, or work done, by privately owned M.T.H. Authorized Service Centers.
If you need assistance at any time email MTH Service at service@mth-railking.com, or call 410 381-2580.
Limited One-Year Warranty
All M.T.H. products purchased from an Authorized M.T.H. Retailer are covered by this warranty.
See our Website to identify an Authorized M.T.H. Retailer near you. M.T.H. products are warrantied for one year
from the date of purchase against defects in material or workmanship, excluding wear items such as light bulbs,
pick-up rollers, batteries, smoke unit wicks, and traction tires. We will replace or credit (at our option) any
defective item with a manufactured suggested retail price of $279.95 or less (excluding all motive power and
electronic items), if the item is returned to an M.T.H. Authorized Service Center (ASC) or M.T.H. National
Authorized Service Center (NASC) within one year of the original date of purchase. For any item with an
MSRP greater than $279.95 (including all motive power and electronics), We will repair, replace or credit (at our
option) the defective item without charge for the parts or labor, if the item is returned to an M.T.H. Authorized
Service Center (ASC) or M.T.H. National Authorized Service Center (NASC) within one year of the original date
of purchase. This warranty does not cover damages caused by improper care, handling, or use. Transportation
costs incurred by the customer to ship the product for warranty service are not covered under this warranty.
Items sent for repair must be accompanied by a return authorization number, a description of the problem, and
a copy of the original sales receipt from an Authorized M.T.H. Retailer stating the date of purchase. If you are
sending this product to an Authorized Service Center, contact that Center for their return authorization.
This warranty gives you specific legal rights, and you may have other rights that vary from state to state. Specific
questions regarding the warranty may be forwarded to M.T.H. directly.
Service Department
M.T.H. Electric Trains
7020 Columbia Gateway Drive
Columbia MD 21046-1532
410-381-2580, service@mth-railking.com
Steel Caboose
The RailKing® Steel Caboose offers a new level of excitement and realism
for your O or O-27 Gauge model railroad. Constructed from sturdy ABS
plastic, the Steel Caboose was created from quality components and has been
designed for years of operation.
The RailKing® Steel Caboose comes fully assembled, decorated and ready
for use right out of the box. The Steel Caboose features an illuminated
interior controlled from track power. Use and operation is made easy by
following the instructions on the following pages.
PLEASE READ BEFORE USE AND SAVE
www.mthtrains.com
STEP
To replace the interior light bulbs, follow these steps. 1)
1 To remove the shell from chassis remove the four screws located
underneath
the
trucks.
2)
With
the
four
screws
removed,
lower the chassis from the shell, take care not to pull the wires out.
2
NSTRUCTIONS
3)
3 To be able to separate the interior from the shell you need to remove the step platform from both ends. In order to do this
you need to loosen the end frames from the step platform. You must do this carefully so that you don't break them. Grasp
the end frame by the bottom and pivot outwards 5°. You can then remove the step platforms. 4)
4 With the step platforms removed you can then lower the
interior down from the shell (to completely remove the body from the interior, goto step 6 which is found on the back page). 5)
5 You can now replace the bulbs
by pushing the socket up from the bulb holder and pull the bulb from its socket. Replace with a new one, and reverse the steps to reassemble the caboose.
To replace the two red LED lights at the ends of the caboose follow steps 1- 4, 6 and 7 on the back page.
I
STEP
STEP
STEP
STEP
STEP
STEP
STEP
2
1
END FRAME
3
Grasp here
Remove these
four screws
STEP
PLATFORM
STEP
4
STEP
Turn the caboose
upside down and
unplug the red
LED's from
underneath the
5
STEP
6
STEP
7
There will be two spots of hot
glue holding the LEDs in place.
Use a screw driver to loosen the
wires from the spots of glue. Pull
the LEDs back towards the
inside of the shell to remove
them. Replace the LEDs with a
new set and use hot glue to put
the wires back in place. Plug the
wires back into the connector
under the interior. Reassemble.
Note: When reassembling, the
end posts of the shell must pass
through the corresponding holes
in the interior.
End Posts of
the Shell
Wires Should
Be Tucked
Behind These
Clips Upon
Re-assembly
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement