RailKing 30-4126-0 2-8-0 Steam R-T-R Train Set Operator’s Manual

RailKing 30-4126-0 2-8-0 Steam R-T-R Train Set Operator’s Manual
www.railking.com
2-8-0 Steam
FreightSet
Set
2-8-0 Steam
Freight
Operation Manual
Thank you for purchasing this RailKing product.
PLEASE READ BEFORE USE AND SAVE
Table of Contents
Set Up Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Assembling RealTrax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Plugging in the Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Lubricating the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Priming the Smoke Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Coupling the Engine and Cars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operation Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Speed Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Direction Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Proto-Cast and Proto-Dispatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Manual Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Care of Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Lubrication and Greasing Instructions . . . . . . . . . . . . . . . . . . . . . . . 10
Cleaning the Wheels, Tires and Track. . . . . . . . . . . . . . . . . . . . . . . . 11
Locomotive Traction Tire Replacement . . . . . . . . . . . . . . . . . . . . . . 11
Smoke Unit Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Locomotive Light Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . 13
Caboose Light Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
RailWare Interactive CD ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Transformer Compatibility Chart . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Service and Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . .23
CAUTION: ELECTRICALLY OPERATED PRODUCT:
Not recommended for children under 10 years of age. M.T.H. recommends adult supervision with children ages 10 16. As with all electric products, precautions should be observed during handling and use to reduce the risk of electric
shock.
WARNING: When using electrical products, basic safety precautions should be observed, including the following:
Read this manual thoroughly before using this device.
l
M.T.H. recommends that all users and persons supervising use examine the hobby transformer and other electronic equipment
periodically for conditions that may result in the risk of fire, electric shock, or injury to persons, such as damage to the primary
cord, plug blades, housing, output jacks or other parts. In the event such conditions exist, the train set should not be used until
properly repaired.
l
Do not operate your layout unattended. Obstructed accessories or stalled trains may overheat, resulting in damage to your
layout.
l
This train set is intended for indoor use. Do not use if water is present. Serious injury or fatality may result.
l
Do not operate the hobby transformer with damaged cord, plug, switches, buttons or case.
l
The transformer was designed to operate on regular US household current (120 volt, 50-60 Hertz). Do not connect to any other
source of power.
l
To avoid the risk of electrical shock, do not disassemble the transformer unit. There are no user-serviceable parts inside. If the
unit is damaged contact M.T.H. Service for instructions.
l
The transformer is equipped with an internal circuit protector. If the circuit protector trips, unplug the power cord from the
electrical wall outlet, check your layout for any short circuits. The circuit breaker will reset automatically when the short is
removed from the circuit.
l
Unplug the transformer from the electrical wall outlet when not in use.
l
Do not use this transformer for other than its intended purpose.
Transformer Ratings:
Input: 120 VAC, 60 Hz Only, Output: 14 VAC 80W or 18VAC 100W
This product may be protected by one or more of the following patents: 6,019,289; 6,280,278; 6,281,606; 6,291,263;
6,457,681; 6,491,263; 6,604,641; 6,619,594; 6,624,537; 6,655,640. ©2004, M.T.H. Electric Trains, Columbia, MD 21046
2
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
Set Up Checklist
r
r
r
r
r
r
r
Assemble RealTrax®
Connect the transformer
Lubricate the engine
Prime the Smoke Unit
Place the engine and cars on the track and couple them together
Position remote lock-on lens
Apply power to run as described in the Basic Operation section of
these instructions.
Set Includes
Steam Engine with Loco-Sound™
Tank Car or Gondola
Stock Car
4-Pieces
10” Straight RealTrax
8-Pieces
O-31 Curve RealTrax
Steam Tender
DVD/CD-Rom
Lighted Lock-On
N5C (PRR only) or Steel Caboose
Z Controller and
Transformer
Tools Needed
Pliers
Philips Screwdriver
Scissors
Cotton Swab or Rag
RailKing Maintenance Kit or
Light Household Oil and Bearing Grease
Optional Equipment
Microphone w/1/8” Plug
1/8” Male to Male Plug
Cassette Player
You can obtain replacement parts and replacement instructions from the
M.T.H. Parts Department
e-mail: parts@mth-railking.com
phone: 410-381-2580
mail: 7020 Columbia Gateway Drive, Columbia MD 21046-1532
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
3
Getting Started
®
Assembling RealTrax
The quick connectors and built-in roadbed allow you to set up RealTrax anywhere,
including carpeted surfaces.
STEP
1
Knock-out must be removed
before remote lock-on can
be installed
STEP
2
Remove knock-out from
outer edge of track by
holding and twisting up
with a pair of pliers
STEP
3
Insert lock-on into
knock-out tab
(Lock-on is the interface between
the track and transformer)
REMOVE TAB
FROM OUTER EDGE
STEP
4
Make sure the metal
contacts line up.
STEP
5
STEP
Align Quick
Connect Plugs
6
Gently push together RealTrax
Connecting the Transformer
The transformer included with this set provides an easy-to-use, safe power source for ACpowered trains and accessories.
To complete the connection between the track and the transformer, simply plug in the
color-coded wire harness that was included in your set and plug the transformer into your
wall outlet.
Plug the wire from the transformer into the Z-Controller’s center port.
Connect the Wires from the Z-Controller to the Lighted Lock-On, being sure that the
wires are connected from red-to-red and black-to-black.
Unplug when not in use
Red Harness
Wire/Plug
Red Harness
Wire/Plug
4
Black Harness
Wire/Plug
Black Harness
Wire/Plug
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
N
IO
T
C
E
IR
D
NE
RL
OT
H IS
H
W
y
B
R
M
Gs
in
INTra
L
L
E
B
le
ILE
ATH
K
ic
tr
c
®
F
F
O
R
T
A
Also functions as a binding post.
N
R
FO
S
M
R
E
C
O
FU
PO LL
WE
R
R
T
N
0
5
-7
R
E
LL
O
E
W
O
P
R
•
!
!
!
Lubricating the Engine
Lubricate all exposed moving parts before operating, using a multi-purpose,
plastic-compatible oil (available with M.T.H.'s Maintenance Kit, sold
separately) or a light household oil. Follow the lubrication points.
Lubricate Valve Gear
Lubricate Pick-Up Rollers
(Do Not Oil the Flat Part of
Pick-Up Rollers)
DO NOT
OVER OIL
Lubricate Side Rods
Priming the Smoke Unit
Add 15-20 Drops
Smoke Fluid
You should prime the smoke unit with smoke fluid before
operating. Add 15-20 drops of smoke fluid from the
included pipette through the smokestack, then gently blow
into the stack to eliminate any air bubbles in the fluid.
If you choose not to prime the unit with fluid, turn the
smoke unit switch located under the tender to the OFF
position. Running the engine without a primed smoke
unit may cause damage. See the "ProtoSmoke Unit
Operation" section of this book for more information
on smoke unit maintenance.
Running the engine without a primed
smoke unit may cause damage
Smoke Unit
ON/OFF Switch
STEP
1
Position
armature
for proper
operation
Incorrect
Position
STEP
2
Place the engine and cars
on the track.
Open couplers by
pressing down on plunger.
STEP
3
Push cars together to
couple.
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
5
DO NOT CONNECT
This Engine To A
Tender From
Another Engine; It May
Cause Serious Damage.
CABLE CURVES
UPWARD
! Plug tender plug into boiler socket at the back of cab.
! Connect the draw bar between the engine and tender.
6
Look at the bottom of the
engine and tender where
each will have a color-coded
stamp. If they match you
may connect those two
pieces; if not, don't.
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
Basic Operation
The Throttle knob controls how fast your train will travel.
! Turn the throttle knob up ½-way, until the engine and caboose lights shine bright.
! Put the engine into motion by pressing the Direction button on your transformer once.
(hold it for approximately 1 second)
If the engine does not begin to move as soon as you firmly press the Direction button, you
may not have sent enough voltage to the track to make the train move. Turn the throttle up
a bit higher until the train begins to move.
Operation Buttons
Throttle To increase or decrease track voltage, and therefore train speed, turn the throttle
control knob. Turning it clockwise will increase voltage and speed, while turning it
counterclockwise will decrease voltage and speed. The engine will maintain the speed
you set after you release the throttle until you turn it again to change the voltage and
speed.
Horn/Whistle - To sound the whistle, firmly press the Horn/Whistle button. The horn will
sound for as long as you continue to depress the button. It will stop when you release the
button.
Bell - To sound the bell, firmly press the bell button. The bell sound will continue until
the bell button is firmly pressed a second time.
Direction Your train is programmed to start in neutral. The
train will always cycle neutral-forward-neutral-reverse with
each press and release of the direction button. The engine is
programmed to restart in neutral each time the track voltage
is turned off for 25 seconds or more.
Speed Control
M.T.H. engines equipped with Loco-Sound have speed control capabilities that allow the
engine to maintain a constant speed up and down grades and around curves, much like an
automobile cruise control. You can add or drop cars on the run, and the engine will
maintain the speed you set.
While the engine is programmed to start with the speed control feature activated, you can
opt to turn it off. This means the engine's speed will fall as it labors up a hill and increase
as it travels downward. It is also affected by the addition or releasing of cars while on the
run. To maintain a constant speed when speed control is turned off, you need to adjust
track voltage yourself.
To turn speed control on and off, put the engine in neutral, then quickly tap the
transformer's Whistle button one time then quickly tap the Bell button two times, allowing
approximately ½ second to lapse between each quick button press. Repeat the 1 whistle, 2
bells code to return it to the other condition. You will want to do this during the initial
neutral upon start-up if you ever couple this engine to another engine that is not
equipped with speed control to avoid damaging the motors in either engine. Each
time you shut down the engine completely, it will automatically turn speed control on.
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
7
Direction Lock
You can lock your engine into a direction (forward, neutral, or reverse) so that it will not
change directions. To do this, put the engine into the direction you want or into neutral, to
lock it into neutral, run it at a very slow crawl (as slowly as it will move without halting),
and quickly but firmly tap the Whistle button once followed by three quick taps of the
Bell button, allowing approximately ½ second to lapse between each quick button press.
The engine will not change direction (including going into neutral) until you repeat the 1
whistle, 3 bells code to return the engine to its normal condition, even if the engine is kept
without power for extended periods of time.
Timing Chart
Press
Whistle
Short &
Firm
Press
½ Sec.
Bell
Pause
Short &
Firm
Total Time Lapse: 1 ½ Seconds
½ Sec.
Pause
Place
Engine into
Neutral
Place
Engine into
Desired
Direction
Whistle
Press
Bell
Short &
Firm
Whistle
Bell
Bell
=
Speed Control
Repeat to Return
to Normal Condition
Bell
Bell
Bell
=
Direction Lock
Repeat to Return
to Normal Condition
Proto-Cast and Proto-Dispatch:
When used with the remote lock-on included in this set, Loco-Sound equipped engines
gain Proto-Cast™ and Proto-Dispatch™ features.
Proto-Cast:
Allows you to play audio recordings through your engine's speaker.
Your set includes an audio source (a small portable CD/tape player) and
a male-to-male mini cable (1/8" plug) to connect the audio source to the
remote lock-on.
To use Proto-Cast
! Plug the mini-cable first into your audio source (into the headphone jack)
! Plug Cable into the "Audio" port on the right side of the remote lock-on.
! Adjust the volume. If engine sounds keep breaking through the recorded sounds,
increase the volume on the audio source.
1/8" plug
+
=
+
Proto-Dispatch
8
Proto-Cast
Proto-Cast
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
Proto-Dispatch: This feature allows you to broadcast your own voice through your
engine's speaker You must supply the microphone for use with the mini cable (1/8”
plug) in this set to connect your microphone to the remote lock-on.
To use Proto-Dispatch
! Connect the microphone to the mini-cable with 1/8” plug included in this set..
! Plug the ”Cable" into the proto-dispatch port on the left side of the remote lock-on
and speak into the microphone.
1/8" plug
Proto-Dispatch
+
Proto-Dispatch
=
Proto-Dispatch
When these features are in use, the locomotive's own sounds (engine sounds and bells,
whistles, and horns) will be muted so that only the sounds you broadcast will be heard.
Because Proto-Cast and Proto-Dispatch are voice activated, there will be a several second
delay after you stop speaking into the microphone or turn off the audio source before the
engine sounds resume. To stop using the feature and return to normal operation, unplug
the cable from the lock-on jack.
If using parallel tracks with multiple Loco-Sound equipped engines, Proto-Cast and
Proto-Dispatch transmissions from one track may be picked up by the other nearby
engines.
If you experience popping and interference when using Proto-Cast or Proto-Dispatch, try
cleaning the track as described in the "Cleaning the Wheels, Tires and Track" section of
this booklet.
NOTE: M.T.H. does not recommend using Proto-Cast
and Proto-Dispatch at the same time.
Manual Volume Control
To adjust the volume of all sounds made by this engine, turn the master volume control
knob located under the tender clockwise to increase the volume and counter-clockwise to
decrease the volume.
increase
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
9
Maintenance
DO NOT
OVER OIL
Lubrication Instructions
The engine should be oiled and greased in order to run properly.
Regularly lubricate all side rods and linkage components and pickup rollers to prevent
squeaking. Use light household oil, such as that found in M.T.H.'s maintenance kit. Do
not over oil. Use only a drop or two on each pivot point.
Lubricate Valve Gear
Lubricate Pick-Up Rollers
(Do Not Oil the Flat Part of
Pick-Up Rollers)
Lubricate Side Rods
Greasing Instructions
The locomotive's internal gearing was greased at the factory. Grease engine every 50
hours of use or one year. Use a lithium based grease and follow the greasing instructions.
SE
EA
GR
!
Remove the screw from the chassis to open
the grease port.
!
Insert the grease tube tip into the port and
squeeze the tube once or twice to add grease
to the gearbox.
!
Wipe off any excess grease and replace the
phillips screw securely.
Cleaning the Wheels, Tires and Track
Periodically check the locomotive wheels and pickups for dirt
and buildup, which can cause poor electrical contact and
traction and prematurely wear out the neoprene traction tires.
Wheels and tires can be cleaned using denatured (not rubbing)
alcohol applied with a cotton swab.
To clean the track, use RailKing Track Cleaning Fluid or
denatured (not rubbing) alcohol and a clean rag. Unplug the
transformer and wipe the rails of the track, turning the rag frequently to ensure that you
are using clean cloth on the rails. Because the manufacturing process leaves a coating on
RealTrax center rail, you should clean the rails after the first 30 minutes of use (you may
notice an electrical smell during initial use as the coating wears off; this is normal).
Thereafter, keep an eye on the track and clean it when it gets dirty to ensure good
electrical contact and to lengthen the life of the tires.
10
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
Traction Tire Replacement Instructions
Your locomotive is equipped with two neoprene rubber traction tires on the rear set of
flanged drivers. While these tires are extremely durable, they may need occasionally
need to be replaced.
STEP
1
! Remove the side rod screws (the rods that connect each drive wheel to the other)
from the wheels in order to slip the old tire off of the grooved drive wheel. These
screws can be loosened with a 5mm nutdriver.
! Clean the groove using a cotton swab and denatured alcohol.
STEP
2
! Make sure the old tire has been completely removed from the groove in the drive
wheel, using a razor blade or small flathead screwdriver to pry away any remains.
! Clean the groove using a cotton swab and denatured alcohol.
! Slip the new tire onto the wheel. You may find it useful to use two small flathead
screwdrivers to stretch the tire over the wheel.
! If you twist the tire while stretching it over the wheel, you will need to remove and
reinstall the tire. Otherwise your engine will wobble while operating.
! Make sure the tire is fully seated inside the groove. Use a razor blade to trim away
any excess tire that doesn't seat itself inside the groove properly.
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
11
®
ProtoSmoke Unit Operation
Add
Add 15-20
15-20 Drops
Drops
Smoke
Smoke Fluid
Fluid
This steam locomotive contains a smoke unit that outputs
smoke through the smokestack on the boiler of the
engine. The smoke unit is essentially a small heating
element and wick that soaks up and then heats a mineral
oil-based fluid that emits a harmless smoke. The smoke
is then forced out of the stack by a small electric fan.
With a few easy maintenance steps, you should enjoy
trouble-free smoke unit operation for years.
!
!
!
!
!
When preparing to run this engine, add 15-20
drops of smoke fluid through the smokestack.
We recommend M.T.H. ProtoSmoke, Seuthe, LGB,
or LVTS fluids (a small pipette of ProtoSmoke fluid
is included). Do not overfill the unit or the fluid
may leak out and coat the interior engine components.
If you choose not to add the fluid (or have already
added the fluid but choose to run smoke-free), turn
off the smoke unit switch located under the tender
body. Failure either to add fluid to the unit or
to turn it off may damage the smoke unit heating
element and/or wicking material.
When the smoke output while running the engine
begins to diminish, add another 10-15 drops of
smoke fluid or turn the smoke unit off.
When storing the unit for long periods of time, you
may want to add about 15 drops of fluid to prevent
the wick from drying out.
After removing the engine from storage, add another
25 drops of fluid, letting the wick soak up the fluid
for 15 minutes prior to operation.
Smoke Unit
ON/OFF Switch
Smoke Unit Cover
Wick in
Wick in
If you experience poor or no smoke output when the
Poor
Good
Condition
Condition
smoke unit is on and has fluid, check the wick to see if it
has become hard, blackened, and unabsorbent around the
heating element. Remove the boiler as shown below. Remove the smoke unit inspection
cover from the locomotive's body (see right). After removing the chassis and inspection
cover screws, lift the inspection plate away and inspect the wick. If it is darkly
discolored and hard, it should be replaced. When priming new wick add 40 drops.
Running the engine without a primed
smoke unit may cause damage
12
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
Locomotive Light Bulb Replacement
To replace the light bulb in the locomotive, follow the boiler removal instructions below.
STEP
1
STEP
2
Remove the six Phillips screws from the chassis then lift the body away from the chassis.
Once the locomotive boiler has been removed
from its chassis, locate the bulb bracket as seen in
the illustration on the right and rotate the
headlight bulb counter-clockwise to remove.
Replace Headlight Bulb
Caboose Light Bulb Replacement
To replace the interior light bulbs follow these instructions and see the diagrams below.
STEP
STEP
1
2
Lower the chassis from
the shell, taking care not
to pull the wires out.
Remove the four (4)
screws located
under the caboose's
STEP
STEP
Carefully loosen
the end frames
on both ends
End
from the step
Frame
platform.
3
Step Platform
4
Lower the
chassis
from the
shell, taking
care not to
pull the
wires out.
Then grasp the
end frame by the
bottom and pivot
outward 5
STEP
5
Replace a Bayonet Bulb by turning
and pushing up, pulling the bulb
from its socket.
Bayonet Bulb
(Part #CI-0000015)
1
2
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
13
Quick-Start DVD
The included Quick-Start DVD demonstrates the start-up and basic operation of this set
as well as other information about model railroading. You may find it helpful to view the
DVD before operating this set.
RailWare Interactive CD ROM
M.T.H. provides a free RailWare CD ROM in each Ready-To-Run set. It is full of
helpful information on M.T.H. product history, track planning software, a dealer finder,
and information and video clips on Loco-Sound and Proto-Sound 2.0. Follow the
directions below to use the CD ROM.
Minimum System Requirements: Pentium 100, 16MB RAM, Windows 95 or later, CD
ROM drive, Sound Card, display properties set to greater than 256 colors. The CD will
not work on a Mac OS unless you run VirtualPC®.
Running RR-Track Software
You may run the RR-Track software directly off of the CD ROM or you may install the
software to your hard drive.
1. On the Desktop, click on the icon that says My Computer.
2. Find your CD ROM drive.
3. With the M.T.H. CD ROM in the drive, double click on the icon for the CD ROM
drive.
4. Find the folder on the CD ROM entitled INSTALLATION.
5. Choose the folder inside entitled RRTRAXSETUP.
6. Run the file in that folder called SETUP.EXE and follow the directions it provides.
The program may ask you for a registration code. If it does type in "M.T.H." and it will
run.
Additional track libraries can be obtained directly from RR-Track. See their website for
more information www.rrtrack.com.
Installing Adobe Acrobat Software
To read some of the electronic documents included on the CD ROM, you will need to
install the Adobe Acrobat Reader® if it is not already on your computer. To install the
software:
1. On the Desktop, click on the icon that says My Computer.
2. Find your CD ROM drive.
3. With the MTH CD ROM in the drive, double click on the icon for the CD ROM
drive.
4. Find the folder on the CD ROM entitled INSTALLATION.
5. Choose the folder inside entitled ACROBAT READER.
*If you are running Windows 95, 98 or NT choose the folder 32 BIT. Run the file
AR32E301.EXE and follow the directions it provides.
If you have problems you cannot resolve by using these directions, contact
custserv@mth-railking.com or call 410-381-2580 for further help.
14
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
Troubleshooting Loco-Sound™ Problems
Although Loco-Sound has been designed and engineered for ease of use, you may have
some questions during initial operation. The following table should answer most
questions. If your problem cannot be resolved with this table, contact M.T.H. for
assistance (e-mail: service@mth-railking.com; telephone: 410-381-2580;
fax: 410-423-0009; mail: 7020 Columbia Gateway Drive, Columbia MD 21046-1532).
Starting Up
Remedy
When I first turn the power on, the This is normal behavior. To prevent accidental high-speed
engine will not begin to run.
start-ups, Loco-Sound is programmed to start up in neutral
anytime track power has been turned off for several seconds.
See the "Basic Operation" section for more details.
The engine will not start after I press You may not be sending enough power to the track to power
the engine. Press the throttle up for a few more seconds to
the Direction button.
increase track power.
Whistle
Remedy
I can't get the whistle to blow when I You may be pressing the button too quickly. Try pressing
press the whistle button.
the whistle button more slowly, taking approximately one
full second to fully depress the button.
Bell
Remedy
I can't get the bell to ring when I press You may be pressing the button too quickly. Try pressing
the bell button more slowly, taking approximately one full
the bell button.
second to fully depress the button.
Lock-out
Remedy
I can't get the engine to run after I
power up the transformer. It sits still
with the engine sounds running.
The engine won't lock into forward,
neutral, or reverse.
Volume
The engine may be locked into the neutral position. Follow
the procedure in the "Lock into a Direction" section to
unlock the engine's direction.
Engine speed must be below 10 scale mph (approx. 10 volts
or less in conventional mode).
Remedy
The sounds seem distorted,
especially when the Horn or bell is
activated.
No sound.
Proto-Cast
and-Dispatch
-Dispatch
Proto-Cast and
Loco-Sound volume is set too high. Turn the volume
control knob on the bottom of the tender counter-clockwise
to reduce the volume.
Volume is set too low, adjust volume control knob on the
bottom of the chassis clockwise to increase the volume or
check connector to speaker.
Remedy
Clean the track with denatured alcohol, as described in the
When I try to play music or my
voice through my engine's speakers, "Cleaning the Wheels, Tires, and Track" section of this
there is popping and interference. book.
Unplug the cable between the audio source and the remote
My Proto-Cast sounds play too
lock-on. Re-plug it into the audio source first, then into the
quietly or unclearly.
lock-on, pushing firmly to make sure it is fully installed.
When I try to play Proto-Cast, the Your recording may be playing too quietly to trigger the
engine's sounds keep breaking in on engine to stop playing its own sound set. Turn up the
volume of the audio source you are using.
my recording.
This is normal behavior. Because Loco-Sound uses radio
When I run two Loco-Sound
engines on tracks near each other, waves to transmit the sound to the engine, other Locothe Proto-Cast and Dispatch sounds Sound engines in the same range will also pick up the
sound. Try moving one of the sets.
play from both engines, not just
from the one connected to the audio
source or microphone.
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
15
Compatibility
While this Ready-To-Run set is equipped with everything you need to operate it, the
design allows flexibility. The train will operate on any traditional O-31 or larger O
Gauge track system, including the RealTrax® included with this set or traditional tubular
track. It is also compatible with most standard AC transformers, including the hobby
transformer packaged with your set.
Transformer Compatibility and Wiring Chart
Note that many of the operational commands described in these instructions require a
bell button, so if you are using a transformer other than the one included in this set and
your transformer does not have its own bell button, you should consider adding one to
get the full benefit of the system.
Transformer
Model
Center Rail
Outside Rail
Min/Max.
Voltage
Power
Rating
Transformer
Type
MTH Z-500
Red Terminal
Black Terminal
0-18v
50-Watt
Electronic
MTH Z-750
Red Terminal
Black Terminal
0-21v
75-Watt
Electronic
MTH Z-1000
Red Terminal
Black Terminal
0-14v
0-18v
80-Watt
100-Watt
Electronic
MTH Z-4000
Red Terminal
Black Terminal
0-22v
390-Watt
Electronic
Lionel 1032
U
A
5-16v
90-Watt
Standard
Lionel 1032M
U
A
5-16v
90-Watt
Standard
Lionel 1033
U
A
5-16v
90-Watt
Standard
Lionel 1043
U
A
5-16v
90-Watt
Standard
Lionel 1043M
U
A
5-16v
90-Watt
Standard
Lionel 1044
U
A
5-16v
90-Watt
Standard
Lionel 1053
U
A
8-17v
60-Watt
Standard
Lionel 1063
U
A
8-17v
60-Watt
Standard
All-Trol
Left Terminal
Right Terminal
0-24v
300-Watt
Electronic
Dallee Hostler
Left Terminal
Right Terminal
Lionel LW
A
U
8-18v
75-Watt
Standard
Lionel KW
A or B
U
6-20v
190-Watt
Standard
Lionel MW
Outside Track
Terminal
Inside Track
Terminal
5-16v
50V.A.
Electronic
Lionel RS-1
Red Terminal
Black Terminal
0-18v
50V.A.
Electronic
Lionel RW
U
A
9-19v
110-Watt
Standard
Lionel SW
U
A
Unknown
130-Watt
Standard
Lionel TW
U
A
8-18v
175-Watt
Standard
Lionel ZW
A,B,C or D
U
8-20v
275-Watt
Standard
Lionel Post-War
Celebration
Series ZW
A,B,C or D
Common
0-20v
135/190 Watt
Electronic
16
Electronic
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
2-8-0 Steam Locomotive Engine Parts
Name and Number
1.) Stanchion ( black )
( plastic )( 3.0mm long )
2.) Handrail ( nickel )( boiler )
3.) Bell ( nickel )
4.) Boiler Shell ( PRR cab# 8014, #30-4103-0E )
( SF cab# 2512, #30-4119-0E )
5.) Lens ( green )( marker )
6.) Lens ( clear )( headlight )
7.) Number board ( PRR cab #8014 )
(SF cab #2512)
8.) Smoke unit
( 7.0x8.0x2.0x3.7mm brass cup )( 7.5mm long posts )
( Proto-Sound 2.0® & Loco Sound™ )
9.) Bulb ( clear )( headlight )
( 6V )( small globe )( screw base)
10.) Bracket ( black )
( smoke unit / headlight )
11.) Screw
( 4/40x6.0mm )( roundhead )
12.) Crosshead ( blackened finish )
( 38.8mm long )
13.) Drive rod ( blackened finish )
14.) Drive block (black)(4 axle)
15.) Bolt ( blackened finish )
( hex head 5.0mm )( M3x9.5mm long )
( 4.0x2.5mm shoulder )
16.) Side rod ( blackened finish )
( 116.0mm long )( 4 holes )
17.) Traction tires
18.) Insulator ( black )
( top )( square )( pick-up )
19.) Screw ( nickel )
( M3x6.0mm )( roundhead )
20.) Wire strap ( white )
( metal )( tab bends over wires )
21.) Tach board
( no spacer between board and optical sensor )
( has a tiny resister on backside of tach board )
22.) Motor ( RS-365SH )
( 8.0x21.0mm gear shaft )( 13.0mm gear threads )
( 9.0x30.0mm white flywheel w/ black stripes )
( tach board mounting strap )
23.) Screw
( 6/32x8.0mm )( roundhead )
24.) Motor mount ( black )
Part #
FB-1200242
FB-1200099
FB-1200101
FB-1200331
FB-1200337
FA-1230025
FA-1230022
FB-1200332
FB-1200338
AA-0000029
CA-0000038
IH-0000085
IA-0000003
EC-1250036
EC-1250037
DF-1200018
IA-0000373
EC-1250038
DE-0000023
BD-0000026
IA-0000015
IH-0000103
AG-0000048
BE-0000076
IA-0000050
BI-0000034
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
17
26.) Wire nut ( yellow )
27.) PC board ( green )
( w/ 10 pin female plug )
28.) Draw bar ( black )
( 67.5mm long )
29.) Spring
( 6.5x10.0mm )( w/ 0.6mm thick wire )
30.) Screw
( 4/40x6.0mm )( washer head )
31.) Nut ( nickel )( 2.5x5.0x10.0mm )
32.) Insulator ( black )
( pick-up )( bottom )( flat )( square )
33.) Pick-up
( 8.0x11.0mm roller )( 24.0mm long )
34.) Bolt ( nickel )
( M3x9.5mm long )( 4.0x2.5mm shoulder )
( 5.0mm hex head )
35.) Truck ( lead )( single axle )
36.) E-clip ( 2.5x6.0x0.5mm )
37.) Washer ( 3.0x7.0x0.4mm )
38.) Spring
( 6.5x11.0mm )( w/ 0.4mm thick wire )
39.) Pin
( 3.0x9.0mm )( flathead )( 1 e-clip groove )
40.) Pivot plate ( nickel )
( for lead truck )
41.) Bracket ( black )
( metal )( 18.6x32.4x40.5mm )( T shaped )
42.) Ferrite bead
43.) Capacitor ( blue )( .01 uF )
( 16.0x2.0mm )( w/ 2 wires )
44.) Steam dome ( black )
45.) Sand dome ( black )
46.) Washer ( black )
( 3.0x6.0x0.4mm )( fiber )
18
BI-4500003
AG-0000039
FB-1200079
IE-0000061
IA-0000028
IC-0000005
BD-0000024
BD-0000050
IA-0000253
DA-1230013
IF-0000004
ID-0000028
IE-0000007
IG-0000007
IH-0000021
IH-0000211
AI-0000030
AI-0000031
FB-1200247
FB-1200246
ID-0000040
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
2-8-0 Steam Locomotive Engine Parts
44
1
3
45
2
5
11
4
2
21
6
5
22
1
7
23
8
42
24
43
20
9
23
11
10
26
25
19
41
11
15
27
18
28
17
11
15
29
16
13
23
12
30
15
17
46
14
23
15
16
23
13
12
40
15
31
11
32
33
39
37
19
38
34
36
35
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
19
2-8-0 Steam Engine Tender Parts
Name and Number
1.) Tender Shell ( PRR, # 30-4103-0E )
(SF, # 30-4119-0E)
2.) Board
( Loco-Sound™ )( steam/turbine )
3.) Screw
( 4/40x8.0mm )( roundhead )
4.) Insulator ( white )
( washer )( 3.0x6.0x3.0mm )( plastic )
5.) Insulator ( clear )
( 13.0x19.0x0.1mm )( single hole )
6.) Screw
( M3x4.0mm )( roundhead )
7.) Screw
( M3x6.0mm )( roundhead )
8.) Wire nut ( yellow )
9.) Speaker cone ( black )
( 44.0x48.3x37.0mm )( plastic )( 2 screw hole tabs )
10.) Speaker (8 ohm)
11.) Wire harness ( black )
12.) Screw
( M2x4.0mm )( roundhead )
13.) Switch ( small )
14.) Screw
( 4/40x6.0mm )( roundhead )
15.) Bracket ( Aluminum )
( for Loco-Sound™ board )
( 14.0x76.0x24.7mm )( 5.0mm step )
16.) Screw
( M3x8.0mm )( roundhead )
17.) Volume pot ( small )
( blue w/ green board )
18.) Spacer ( black )
( 3.0x6.0x4.0mm )( plastic )
19.) Chassis ( black )
( 58.0x175.0mm )( has new hole for battery jack )
20.) Screw
( M3x16.0mm )( washer head )( self-drilling threads )
21.) T-bar
22.) Coupler ( black )
( mechanical )( 51.5mm long )
23.) Armature ( black )
( 45.0mm long )
24.) Spring
( 6.5x11.0mm )( w/ 0.4mm thick wire )
20
Part #
GA-1200125
GA-1200128
AE-0000003
IA-0000011
ID-0000025
ID-0000024
IA-0000010
IA-0000016
BI-4500003
BF-0000020
BF-0000015
BC-1200103
IA-0000058
BB-0000009
IA-0000003
IH-0000212
IA-0000035
BI-0000040
ID-0000071
GB-1200047
IA-0000025
IG-0000001
DD-0000039
DD-0000040
IE-0000007
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
25.) Washer ( black )(plastic)
( 4.6x8.6x2.0mm )( inside 7.0x1.0mm )( cup shaped )
26.) E-clip ( 3.0x8.0x0.5mm )
27.) Truck ( black )
( tender )( 2 axle )
28.) Screw
( 6/32x6.0mm )( washer head )
29.) Gasket ( black )
( speaker ring )( 43.8x49.8x3.0mm )( foam )
NS.) Wire harness
( 12 pin black male plug )
ID-0000060
IF-0000002
DA-1250012
IA-0000214
IB-0000009
BC-1200104
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
21
2-8-0 Steam Engine Tender Parts
1
2
3
7
4
5
6
8
15
14
16
9
17
13
10
18
19
12
29
11
21
22
20
23
24
20
28
25
26
27
14
22
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
Service & Warranty Information
How to Get Service Under the Terms of the Limited One-Year Warranty
When you suspect an item is defective, please check the operator's manual for standard
operation and trouble-shooting techniques that may correct the problem. Additional
information may be found on the M.T.H. Website. Should you still require service, follow
the instructions below to obtain warranty service.
First, e-mail, write, call or fax a M.T.H. Authorized Service Center (ASC) in your area to obtain Repair
Authorization. You can find the list of ASCs on the M.T.H. Website, www.mth-railking.com. Authorized Service
Centers are required to make warranty repairs on items sold only from that store; all other repairs may-- or may not
be done at the store's own discretion. If you did not purchase the item directly from the ASC, you will need to
select a National Authorized Service Center (NASC). These centers are compensated by M.T.H. to perform
warranty service for any customer whose repair qualifies for warranty service. A list of NASC retailers can be
located on the M.T.H. Website or by calling 1-888-640-3700. Should the warranty no longer apply, you may
choose either an ASC or NASC retailer to service your M.T.H. Product. A reasonable service fee will be charged.
CAUTION: Make sure the product is packed in its original factory packaging including its foam and plastic
wrapping material to prevent damage to the merchandise. There is no need to return the entire set if only one of
the components is in need of repair unless otherwise instructed by the Service Center. The shipment must be
prepaid and we recommend that it be insured. A cover letter including your name, address, daytime phone
number, e-mail address (if available), Return Authorization number (if required by the service center, a copy of
your sales receipt and a full description of the problem must be included to facilitate the repairs. Please include
the description regardless of whether you discussed the problem with a service technician when contacting the
Service Center for your Return Authorization.
Please make sure you have followed the instructions carefully before returning any merchandise for service.
Authorized M.T.H. Service Centers are independently owned and operated and are not agents or representatives of
M.T.H. Electric Trains. M.T.H. assumes no responsibility, financial or otherwise, for material left in their
possession, or work done, by privately owned M.T.H. Authorized Service Centers.
If you need assistance at any time email MTH Service at service@mth-railking.com, or call 410 381-2580.
Limited One-Year Warranty
All M.T.H. products purchased from an Authorized M.T.H. Train Merchant are covered by this warranty.
See our website at www.mth-railking.com or call 1-888-640-3700 to identify an Authorized M.T.H. Train Merchant near you.
M.T.H. products are warrantied for one year from the date of purchase against defects in material or workmanship, excluding wear
items such as light bulbs, pick-up rollers, batteries, smoke unit wicks, and traction tires. We will repair or replace (at our option)
the defective part without charge for the parts or labor, if the item is returned to the M.T.H. Authorized Service Center (ASC)
where it was purchased or a M.T.H. National Authorized Service Center (NASC) within one year of the original date of purchase.
This warranty does not cover damages caused by improper care, handling, or use. Transportation costs incurred by the customer
are not covered under this warranty.
Items sent for repair must be accompanied by a return authorization number, a description of the problem, and a copy of the
original sales receipt from an Authorized M.T.H. Train Merchant, which gives the date of purchase. If you are sending this
product to an Authorized Service Center, contact that Center for their return authorization.
This warranty gives you specific legal rights, and you may have other rights that vary from state to state. Specific questions
regarding the warranty may be forwarded to M.T.H. directly.
Service Department
M.T.H. Electric Trains
7020 Columbia Gateway Drive
.Columbia MD 21046-1532
RailKing 2-8-0 Steam Freight Set with Loco-Sound™
23
AUTHORIZED SERVICE CENTER
7020 Columbia Gateway Dr. - Columbia, MD 21046
Information: 410-381-2580 Fax: 410-381-6122
www.mth-railking.com
PARTICIPATING A.S.C.
RETAILER LIST
ALABAMA
COLORADO
ILLINOIS
SOUTHERLAND STATION
HUNTSVILLE
256-533-4720
CUSTOM RAILWAY SUPPLY
COLORADO SPRINGS
719-634-4616
BERWYN'S TOY TRAINS &
MODELS
BERWYN
708-484-4384
ARIZONA
CABOOSE HOBBIES, INC.
DENVER
303-777-6766
ARIZONA TRAIN DEPOT
MESA
480-833-9486
CALIFORNIA
CENTRAL COAST TRAINS
ATASCEDERO
805-466-1391
TRAIN SHACK
BURBANK
818-842-3330
MIZELL TRAINS
WESTMINSTER
303-429-4811
TIME MACHINE HOBBY, L L C
MANCHESTER
860-646-0610
FLORIDA
AMHERST DEPOT
ENGLEWOOD
941-475-2020
ROUNDHOUSE
NORTH HOLLYWOOD
818-769-0403
DEPOT HOBBY SHOP
lANTANA
561-585-1982
DOLLHOUSES, TRAINS &
MORE
NOVATO
415-883-0388
HOLLYWOOD STATION
MIAMI
954-921-2700
RON'S WORLD
SAN CLEMENTE
949-361-5596
BLACK NIGHT TRAINS &
HOBBIES
SANTA ROSA
707-523-3522
BILL’S ENGLEWOOD STATION
ORLAND PARK
708-460-4906
CONNECTICUT
REED’S HOBBY SHOP
LA MESA
619-464-1672
TIN PLATE JUNCTION
OAKLAND
510-444-4780
CHICAGOLAND HOBBY
CHICAGO
773-775-4848
READY TO ROLL
MIAMI
305-688-8868
COLONIAL PHOTO & HOBBY
ORLANDO
407-841-1485
WARRICK CUSTOM HOBBIES
PLANTATION
954-370-0708
ROUNDHOUSE SOUTH
PORT ORANGE
386-304-7002
BIKE & CHOO CHOO
CONNECTION
SCHAUMBURG
847-882-7728
INDIANA
Y. O. R. K. TRAINS
MUNSTER
219-838-9999
SAMUELSON'S TRAIN SHOP
VALPARAISO
219-462-2708
IOWA
CABOOSE STOP HOBBIES
CEDAR FALLS
800-642-7012
KANSAS
HOBBY HAVEN
OVERLAND PARK
913-381-3111
KENTUCKY
L& N TRAINS & THINGS
LOUISVILLE
502-897-9005
LOUISIANA
MINNESOTA
AMERICA'S TRAIN YARD
BATON ROUGE
225-926-5592
DON'S HOBBY CO.
MANKATO
507-387-1330
MAINE
MISSOURI
WHEELS, WINGS & THINGS
LUDLOW
207-532-6277
SWITCH STAND
SAINT LOUIS
314-781-4458
MARYLAND
MARK TWAIN HOBBY CENTER
ST. CHARLES
636-946-2816
HOLLY BEACH TRAIN DEPOT
WILDWOOD
609-522-2379
NEW YORK
HOBBYTOWN U S A
FREDERICK
301-694-7395
NEVADA
FREDERICK JUNCTION
FREDERICK
301-694-3434
ENGINE HOUSE HOBBIES
GAITHERSBURG
301-590-0816
J & B TRAINS
HAGERSTOWN
240-420-4930
THE TRAIN ROOM
HAGERSTOWN
301-745-6681
PURKEY'S TOY TRAINS
SYKESVILLE
410-549-6061
CATOCTIN MOUNTAIN TRAINS
& HOBBIES
THURMONT
301-694-8331
E.L. JONES & SONS
WILLIAMSPORT
800-810-8138
MASSACHUSETTS
FLYING YANKEE HOBBY
SHOP
BOSTON
617-323-9702
NORTHEAST TRAINS
PEABODY
978-532-1615
EAST BAY HOBBIES
SEEKONK
508-336-5573
PIONEER VALLEY HOBBIES
W. SPRINGFIELD
413-732-5531
MICHIGAN
MICHIGAN MODEL TRAIN
CENTER
PINCKNEY
734-426-1651
BRASSEUR ELECTRIC
TRAINS INC.
SAGINAW
989-793-4753
RENO RAILS
RENO
775-337-6669
NEW HAMPSHIRE
TREASURED TOYS
SALEM
603-898-7224
NEW JERSEY
L B C MODEL TRAINS
BUFFALO
716-631-3081
KURT’S TRAINS & HOBBIES
CALEDONIA
585-538-2960
AURORA RAILS & HOBBIES
EAST AURORA
716-652-5718
NASSAU HOBBY CENTER,
INC.
FREEPORT
516-378-9594
J & R JUNCTION
LIVERPOOL
315-451-6551
HOBBY SHOP
ABERDEEN
732-583-0505
HOBBY WORLD
MONTICELLO
845-794-8770
COUNTRY AND STUFF
ANDOVER
973-786-7086
CITY DEPOT, INC.
NEW HAMPTON
845-374-3010
GENE’S TRAINS
BRICK
732-840-9728
THIRD STREET DEPOT
NIAGARA FALLS
716-285-6464
COLUMBUS TRAIN STATION
COLUMBUS
609-518-1800
ISLAND TRAINS
STATEN ISLAND
718-317-0008
ATLANTIC RAILS
HAMMONTON
609-567-8490
SCAG'S ELECTRIC TRAIN
SHOP
STATEN ISLAND
718-727-7373
C B TRAIN DEPOT
HILLSDALE
201-666-9598
GRAND CENTRAL STATION
KEARNY
201-955-6200
J & B TRAINS, INC.
MAPLE SHADE
856-414-0092
HOBBYMASTERS, INC
RED BANK
732-842-6020
RIDGEFIELD HOBBY
RIDGEFIELD
201-943-2636
TOM'S MODEL TRAINS
SCOTCH PLAINS
908-322-6122
TRAINS & THINGS
TRENTON
609-883-8790
AMERICANA STORE
TIVOLI
845-757-4246
KROSS HARDWARE
WEST BABYLON
631-669-3069
WESTCHESTER CENTRAL
TRAINS
WHITE PLAINS
914-421-1262
NORTH CAROLINA
THE ROUNDHOUSE &
BACKSHOP
CARY
919-465-0810
DRY BRIDGE STATION
MOUNT AIRY
336-786-9811
THE FREIGHT YARD
SMITHFIELD
919-934-6229
CHARLEROI SWEEPER
CENTER
CHARLEROI
724-483-3397
RHODE ISLAND
GRANDMA'S HOUSE
GRANDPA'S TRAIN
WARWICK
401-463-7803
LITTLE CHOO CHOO SHOP
INC.
SPENCER
704-637-8717
JERRY QUINN TRAINS & TOYS
COATESVILLE
610-383-1931
TRAIN LOFT
WINSTON-SALEM
336-760-9817
CRANBERRY HOBBY DEPOT
CRANBERRY TWP
724-776-3640
TENNESSEE
OHIO
FAIRCHANCE PHARMACY
FAIRCHANCE
724-564-7817
MODEL RAILROAD & HOBBY
SHOP
MEMPHIS
901-384-6500
TRAINS R FUN
FRAZER
610-644-4585
TRAINS-N-THINGS
PARIS
731-641-8880
E & S TRAINS
AKRON
330-745-0785
T & K HOBBY SHOP
BRIDGEPORT
740-633-6607
PARMA HOBBY
CLEVELAND
216-741-6440
SANDY'S HOBBY'S &
COLLECTIBLES
ELYRIA
440-365-9999
DUNHAM’S TOY TRAINS
LONDON
740-852-0899
CLEARVIEW TRAIN & HOBBY
LORAIN
440-277-4488
DIXIE UNION STATION
MASON
513-459-0460
DAVIS TRAINS
MILFORD
1-800-448-1060
ERIE RAILWAY DEPOT
TROY
937-440-9922
PENNSYLVANIA
AMERICAN HOBBY CENTER
ALIQUIPPA
724-378-3930
BUSSINGER TRAINS
AMBLER
215-628-2366
JIM'S HOBBY SERVICE
BERWICK
570-759-2695
YE OLDE TRAIN &
CHRISTMAS SHOPPE
BOYERTOWN
610-369-0755
NICHOLAS SMITH TRAINS
BROOMALL
610-353-8585
THE CABOOSE
LEHIGHTON
570-386-5352
SCHUYLKILL FLYER HOBBIES
LEESPORT
484-248-2100
HOBBY CITY
McMURRAY
724-942-2557
ENGLISH MODEL RR
MONTOURSVILLE
800-327-5126
STATION/M H INDUSTRIES
NEW CUMBERLAND
717-774-7096
SOUTH CAROLINA
EMERALD TRAIN & HOBBY
GREENWOOD
864-223-2247
TEXAS
HOBBY TIME
AMARILLO
806.352.9660
RIVERVIEW TRAINS
ANGLETON
979-848-3895
GREAT TRAINS & HOBBIES
LONGVIEW
903-757-2720
UTAH
ALMOSTA JUNCTION
CLEARFIELD
801-776-1656
VIRGINIA
FRYER'S STORE
ORWIGSBURG
570-366-2258
LEESBURG HOBBIES &
COLLECTIBLES
LEESBURG
703-779-8600
TOBY TYLER’S HOBBY
CENTER
PITTSBURGH
412-653-5030
LOCUST GROVE TRAINS
LOCUST GROVE
540-854-8955
WILCOX GREENHOUSE &
NURSERY
TITUSVILLE
814-827-3823
EASTERN DEPOT
TROY
570-297-1975
J & J RAILROAD CROSSING
INC
TURTLE CREEK
412-824-6009
THE TRAIN SHOPPE & HOBBY
CENTER LD
WILKES BARRE
570-824-7688
TRAINS, ETC.
LORTON
703-550-1779
TRAIN DEPOT
MANASSAS
703-335-2216
CHESTERFIELD HOBBIES
MIDLOTHIAN
804-379-9091
DAVIS HOBBY SUPPLIES
PORTSMOUTH
757-397-1983
TOY TRAIN CENTER
RICHMOND
804-288-4475
T S G HOBBIES
WARRENTON
540-347-9212
NORGE STATION
WILLIAMSBURG
757-564-7623
WASHINGTON
EASTSIDE TRAINS
KIRKLAND
425-828-4098
WEST VIRGINIA
PATRICK'S TRAINS
WHEELING
304-232-0714
WISCONSIN
WOODCRAFTERS SHOP
BURLINGTON
262-763-5239
SOMMERFELD'S TRAINS
BUTLER
262-783-7797
HOBBY OUTLET
FOND DU LAC
920-924-3770
G B T V & TRAINS
GREEN BAY
920-496-9697
THE TRAIN ROOM
FERGUS
19-787-3280
CREDIT VALLEY RAILWAY
COMPANY
TREETSVILLE
905-826-1306
B&H TRAINS
TERREBONNE
514-793-9696
GRAMPA'S TRAIN SHOP
RICE LAKE
715-234-2996
CANADA
TOY TRAIN WORKSHOP
CUMBERLAND
613-833-8331
PARTICIPATING N.A.S.C. LIST
CALIFORNIA
MICHIGAN
TIN PLATE JUNCTION
OAKLAND
510-444-4780
MICHIGAN MODEL TRAINS
PINCKNEY
734-426-1651
COLORADO
BRASSEUR ELEC. TRAINS
SAGINAW
989-793-4753
MIZELL TRAINS
WESTMINSTER
303-429-4811
TIME MACHINE HOBBY, L L C
MANCHESTER
860-646-0610
TREASURED TOYS
SALEM
603-898-7224
NEW YORK
FLORIDA
COLONIAL PHOTO & HOBBY
ORLANDO
407-841-1485
ROUNDHOUSE SOUTH
PORT ORANGE
386-304-7002
ILLINOIS
CHICAGOLAND HOBBY
CHICAGO
773-775-4848
KENTUCKY
L&N TRAINS & THINGS
LOUISVILLE
502-897-9005
MARYLAND
ENGINE HOUSE HOBBIES
GAITHERSBURG
301-590-0816
CATOCTIN MOUNTAIN TRAINS
& HOBBIES
THURMONT
301-694-8331
TOBY TYLER’S HOBBY CEN.
PITTSBURGH
412-653-5030
VIRGINIA
NEW HAMPSHIRE
CONNECTICUT
ENGLISH MODEL RR
MONTOURSVILLE
800-327-5126
L B C MODEL TRAINS
BUFFALO
716-631-3081
AURORA RAILS & HOBBIES
EAST AURORA
716-652-5718
THIRD STREET DEPOT
NIAGARA FALLS
716-285-6464
OHIO
DAVIS TRAINS
MILFORD
1-800-448-1060
PENNSYLVANIA
BUSSINGER TRAINS
AMBLER
215-628-2366
JIM'S HOBBY SERVICE
BERWICK
570-759-2695
FAIRCHANCE PHARMACY
FAIRCHANCE
724-564-7817
LOCUST GROVE TRAINS
LOCUST GROVE
540-854-8955
DAVIS HOBBY SUPPLIES
PORTSMOUTH
757-397-1983
T S G HOBBIES
WARRENTON
540-347-9212
WISCONSIN
SOMMERFELD'S TRAINS
BUTLER
262-783-7797
GRAMPA'S TRAIN SHOP
RICE LAKE
715-234-2996
CANADA
TOY TRAIN WORKSHOP
CUMBERLAND
13-833-8331
THE TRAIN ROOM
FERGUS
519-787-3280
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement