RIVA RC5510 Quick Installation Guide

RIVA RC5510  Quick Installation Guide
1
Quick Installation Guide
This manual has been designed to guide you through basic settings of your IP devices, such as
installation and configuration for using them.
www.rivatech.de
2
Step1. Assemble and install IP device
1) Connect the LAN cable and power supply
cable with the camera. For the detailed
information, please refer to the Step 2.
2) Place the installation template (which is
included in the package) on the ceiling.
3) Drill four holes on the template and insert
anchor blocks into the holes. Fasten the
surface mount bracket with screws.
4) Put the main body on the surface mount
bracket of the camera. Make sure the bracket
and the main body fit each other into place.
5) Fasten the main body with screws.
When assembling the main body of the camera and its dome cover,
make sure they fit each other into place.
!
Caution
The camera may fall off the ceiling even after the proper installation and
mounting. To prevent any accident, make sure the ceiling is firm and
stable enough to support the camera. If any reinforcement is needed,
consult with your safety personnel and proceed with the installation.
www.rivatech.de
3
Step2. Connect cables to IP device
Connect each cable to the device. To see the correct positions of all connectors, refer to the
following image below.
DC 12V
AUDIO
In
DI
DO
RS-485
Out
12V
Vout
Reset Button
AUDIO
In
Out
DI
DO
RS-485
Vout
12V
LAN Cable
* Models herein and their
appearance are subject to change
without any prior notice.
!
Caution
Make sure the polarity is correct. Incorrect
connection may cause malfunction or damage to
the IP device.
www.rivatech.de
Power Adaptor Connector (DC 12V)
4
Step3. Set up network environment
The default IP address of your IP device is 192.168.XXX.XXX. You can find the available IP
address from the MAC address of your device. Please make sure the device and your PC are
on the same network segment before running the installation. If the network segment was
different between your PC and the device, change your PC’s settings as below.
IP address
: 192.168.xxx.xxx
Subnet mask: 255.255.0.0
www.rivatech.de
5
Step 4. View video on web page
View the live video on a web page using your IP device and its IP address. To have the correct
IP address ready and use it on a web page:
1. Convert a MAC address to an IP address. Refer to the Hexadecimal-Decimal Conversion
Chart at the end of this manual.
(The MAC address is attached on the side or bottom of the device.)
MAC address = 00-13-23-01-14-B1 → IP address = 192.168.20.177
Convert the Hexadecimal number to Decimal number.
2. Open a web browser and enter the IP address of the device.
3. Click pop-up blocked and install the ActiveX setup.exe by clicking the Run or Save button.
You need to install the ActiveX for displaying the images.
4. Follow the instructions of the dialog boxes and complete the installation. Then the live video
is displayed on the main page of the web browser.
5. If the live video is not displayed with the message said, “This software requires the
Microsoft XML Parser V6 or higher. Please download MSXML6 from the Microsoft
website to continue. Error code: Can not create XMLDOMDocument.”, please download
and install the relevant MSXML.
* The explanation and captured images on this manual are mainly on the basis of Internet
Explorer 7.0.
www.rivatech.de
6
Step5. Setting IP Address
To set up the Network configuration:
1. Click Setup on the upper right of the web page. The login page is displayed as below.
2. Enter the default user name (root) and the default password (pass), and then select OK.
The default username
and password are:
root and pass.
3. Click System Options on the left of the Setup page, and then select TCP/IP from the dropdown menu.
4. Input the data for the IP address configuration, and click the Apply button on the bottom of
the page.
To change the IP address, please make sure to check and have the correct Subnet mask and
Gateway ready. To use DHCP, select Obtain an IP address via DHCP.
To learn how to set up the web page for advanced configuration, refer to the Web Interface
Manual, which is provided on USB stick or can download from www.rivatech.de homepage.
www.rivatech.de
7
Advanced setup (IPAdminTool)
IPAdminTool is a utility program for IP products. Following list shows a part of features that
IPAdminTool provides.




Configure IP address, Subnet mask and Gateway
Shows network related information such as MAC address
Updates firmware
Reboots the device
IPAdminTool is provided on USB stick or can download from www.rivatech.de homepage.
Rebooting
Reset can be carried out as follows:
1. While the device is in use, press and hold the Reset.
2. Release the Reset button after 3 seconds.
3. Wait for the system to reboot.
www.rivatech.de
8
Resetting to the Factory Default Settings
This will reset all parameters, including the IP address, to the Factory Default initialization.
To perform the Factory Default settings:
1. Disconnect the power supply from the device.
2. Connect the power to the device with the Reset button pressed and held.
3. Release the Reset button after 5 seconds.
4. Wait for the system to reboot.
More Information
To learn more about using other features of your devices, refer to the manuals, which is
available on USB stick or can download from www.rivatech.de homepage.
www.rivatech.de
9
Hexadecimal-Decimal Conversion Table
Refer to the following table when you convert the MAC address of your device to IP address.
Hex
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
Dec
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Hex
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
Dec
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
Hex
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
50
51
52
53
54
55
56
57
58
59
5A
5B
5C
5D
5E
5F
www.rivatech.de
Dec
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
Hex
60
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
6E
6F
70
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
Dec
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
10
Hex
80
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
96
97
98
99
9A
9B
9C
9D
9E
9F
Dec
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
Hex
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
AA
AB
AC
AD
AE
AF
B0
B1
B2
B3
B4
B5
B6
B7
B8
B9
BA
BB
BC
BD
BE
BF
Dec
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
Hex
C0
C1
C2
C3
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
CF
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
DA
DB
DC
DD
DE
DF
www.rivatech.de
Dec
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
Hex
E0
E1
E2
E3
E4
E5
E6
E7
E8
E9
EA
EB
EC
ED
EE
EF
F0
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
FB
FC
FD
FE
FF
Dec
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement