TP-Link TL-PA7020 KIT AV1000 2-Port Gigabit Powerline Kit User Guide

Add to my manuals
16 Pages

advertisement

TP-Link TL-PA7020 KIT AV1000 2-Port Gigabit Powerline Kit User Guide | Manualzz

User Guide

AV1000 2-

p

ort Gigabit Powerline Adapter

TL-PA7020

REV2.0.0 1910011905

Contents

About This Guide 1

Chapter 1 Get to Know Your Powerline Adapter 2

1. 1. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1. 2. Product Appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Chapter 2 Use Your Powerline Adapter 5

2. 1. Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2. 2. Extend Your Wired Network by Plug & Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2. 3. Secure Your Powerline Network by Pairing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2. 4. Add Another Powerline Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2. 5. Manage Your Powerline Network via tpPLC Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

FAQ (Frequently Asked Questions) 11

About This Guide

This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick Internet setup, while this guide contains details of each function and demonstrates how to configure them in typical scenarios.

When using this guide, please notice that features of the powerline adapter may vary slightly depending on the model and software version you have, and on your location, and language. All images, parameters and descriptions documented in this guide are used for demonstration only.

Conventions

In this guide, the following conventions are used:

Convention Description

Teal Underlined

Hyperlinks are in teal and underlined. You can click to redirect to a website or a specific section.

Teal

Note:

Tips:

Key information appears in teal, including management page text such as menus, items, buttons and so on.

Ignoring this type of note might result in a malfunction or damage to the device.

Indicates important information that helps you make better use of your device.

More Info

• The latest software, management app and utility are available from the Download

Center at http://www.tp-link.com/support .

• The Quick Installation Guide (QIG) can be found where you find this guide or inside the product package.

• Specifications can be found on the product page at http://www.tp-link.com

.

• A Technical Support Forum is provided for you to discuss our products at http:// forum.tp-link.com

.

• Our Technical Support contact information can be found at the Contact Technical

Support page at http://www.tp-link.com/support .

1

Chapter

1

Get to Know Your Powerline

Adapter

This chapter introduces what the powerline adapter can do and describes its appearance.

It contains the following sections:

Product Overview

Product Appearance

Chapter 1 Get to Know Your Powerline Adapter

1 1 Product Overview

TP-LINK powerline adapter aims to extend your exsiting home network, with the help of your home’s electrical circuit.

1 2 Product Appearance

Your powerline adapter may differ in appearance slightly from that depicted because of the region and product version.

1 2 1 LED Legend

LEDs indicate the powerline adapter’s working status. For more details, please refer to the following table.

Name Status Indication

Power

On/Off

Blinking

The powerline adapter is on or off.

Once every second: Pairing is taking place.

Once every 3 seconds: Power-Saving Mode* is on.

Powerline

Ethernet

Red

Off

On

Off

The powerline adapter is in a location with a poor signal strength. We recommend trying another wall socket.

The powerline adapter is not connected to any powerline network or is in Power-Saving Mode.

At least one Ethernet port is connected.

No Ethernet port is connected.

* If the device connected to the adapter is turned off or inactive for more than 5 minutes, the powerline adapter will automatically switch to Power-Saving Mode.

3

Chapter 1

1 2 2 Physical Interface

Get to Know Your Powerline Adapter

Ethernet Port

Pair Button

Plug

Power Plug

The powerline adapter has a Plug that can be connected to any standard power socket.

Pair Button

Press and hold the button for 1 second to join a powerline network. Go to

Secure Your

Powerline Network by Pairing

for more information.

Press and hold the button for about 8 seconds to leave the existing powerline network.

Press and hold the button for more than 15 seconds to reset the powerline adapter to factory defaults.

Ethernet Port

Connect the Ethernet port to your wired devices, such as a computer, a router or a game console, via an Ethernet cable.

4

Chapter

2

Use Your Powerline Adapter

This chapter guides you on how to use the powerline adapter.

It contains the following sections:

Before You Start

Extend Your Wired Network by Plug & Play

Secure Your Powerline Network by Pairing

Add Another Powerline Adapter

Manage Your Powerline Network via tpPLC Utility

Chapter 2 Use Your Powerline Adapter

2 1 Before You Start

Powerline adapters work in pairs. You should have at least two powerline products to build a powerline network. To optimize your network performance, please follow these principles:

• All powerline adapters should be on the same electrical wiring system.

• Avoid plugging in powerline adapters and high-powered household devices (such as washing machines and refrigerators) close to one another.

• Plug the powerline adapter directly into a wall outlet. Do not plug the powerline adapter into a power strip, extension cord, or surge protector.

Wall Outlet Power Strip

6

Chapter 2 Use Your Powerline Adapter

2 2 Extend Your Wired Network by Plug & Play

I want to:

How can I do that?

Use two powerline adapters to set up a new powerline network in my house.

For example, I have a router in my house, but there are not enough

LAN ports for all my wired devices. I don’t want complex and expensive cabling. People told me that I can solve this problem with two powerline adapters.

1 Connect one of the powerline adapters to an available LAN port of the router using an Ethernet cable.

2 Plug the powerline adapter into a wall outlet.

3 Plug the other powerline adapter into a wall outlet on the same electrical circuit at the place you want Internet. Wait until the powerline LED turns on.

Note: If the Powerilne LED does not turn on, reset each powerline

adapter to its factory default settings. Refer to How do I reset my powerline adapter?

for detailed information.

4 Connect your wired device, such as a computer or game console, to the powerline adapter via an Ethernet cable.

Adapter

TL-PA7020

1000Mbps

3

Wait until the Powerline

LED turns on.

Pow erline

Router

WAN L

AN

1

Adapter

TL-PA7020

1000Mbps

2

Done!

Now enjoy the Internet!

7

Chapter 2 Use Your Powerline Adapter

2 3 Secure Your Powerline Network by Pairing

All powerline adapters share some common factory settings, and can communicate with one another. If you want your powerline adpaters to communicate only with your own powerline adapters, you should pair them. Thus a secured powerline network is formed and other powerline adapters can no longer join your powerline network without being paired.

Note: You can only pair two devices at a time.

I want to:

How can I do that?

Secure my powerline network and prevent other powerline devices from being added to my network.

For example, I’ve extended my network using the Plug & Play method. Now I want to secure my network.

1 Verify all powerline devices’ Power LEDs are solid on.

Tips: We recommend that you plug in your powerline devices next to each other, or as close to each other as possible when pairing. Your settings will not be affected. The devices can be relocated to where they are needed once pairing is complete.

2 Press the Pair button on one of the powerline devices for 1 second. Its Power LED starts blinking.

3 Within two minutes, press the Pair button on another powerline adapter for 1 second. Its Power LED starts blinking. When the Powerline LED stays on, the pairing process is complete.

Blinking On

Done!

Blinking within 2 minutes

1000Mbps

Enjoy your secure powerline network!

1000Mbps

8

Chapter 2 Use Your Powerline Adapter

2 4 Add Another Powerline Adapter

I want to:

How can I do that?

Add a new powerline adapter into the existing powerline network to extend my network.

For example, I’ve already set up a powerline network using powerline devices, but the network does not reach everywhere I need it to. I purchased another one to further extend my network.

1 Plug the new powerline adapter into a wall outlet near one of the existing powerline devices.

Pow erline

1000Mbps

1000Mbps

1000Mbps

2 Wait for a minute, and check whether the Powerline LED stays on. If it’s on, skip to step 3. If it’s not, continue with step 2 to pair the new powerline adapter into the secured powerline network.

a . Press the Pair button on one of the existing powerline devices for 1 second. Its Power LED starts blinking.

b . Within two minutes, press the Pair button on the new powerline adapter for 1 second. Its Power LED starts blinking. When the Powerline LED stays on and solid, the pairing process is complete.

Blinking Blinking On

6 within 2 minutes

Existing

Powerline Device

1000Mbps

New

Powerline Device

1000Mbps

3 Relocate the new powerline adapter to the place where wired

Internet access is needed.

9

Chapter 2 Use Your Powerline Adapter

Done!

Enjoy the Internet through your extended network!

2 5 Manage Your Powerline Network via tpPLC

Utility

The tpPLC utility enables you to view and manage your TP-LINK powerline network. Its bold and intuitive interface helps you easily configure each powerline device.

You can find the utility and its user guide on the product support page at http://www.tp-link.com

.

10

FAQ (Frequently Asked

Questions)

Q1 How do I reset my powerline adapter?

With the powerline adapter plugged into the wall socket, press and hold its Pair button for more than 15 seconds until the Power LED goes off momentarily and comes back on.

Q2 How to troubleshoot if there is no Internet connection via my powerline network?

• Make sure all powerline devices are on the same electrical circuit.

• Make sure the Powerline LEDs are lit on all of your powerline devices. If they are not, pair all powerline devices according to

Secure Your Powerline Network by Pairing .

• Make sure all devices are correctly and securely connected.

• Verify that you have an Internet connection by connecting your computer directly to the modem or the router.

Q3 What can I do if a successfully-paired powerline device does not reconnect after it has been moved to a new location ?

• Try another socket on the same electrical circuit.

• Try to pair it again, and make sure the Powerline LED is on.

• Check for possible interference due to washing machines, air conditioners or other household appliances. Some powerline devices have an integrated electrical socket.

You can plug appliances into this socket to remove the electrical noise originating from them, using a power strip if necessary.

11

COPYRIGHT & TRADEMARKS

Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK

TECHNOLOGIES CO., LTD. All rights reserved.

12

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

BSMI Notice

安全諮詢及注意事項

• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。

• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。

13

• 注意防潮,請勿將水或其他液體潑灑到本產品上。

• 插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。

• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。

• 請不要私自打開機殼,不要嘗試自行維修本產品,請由授權的專業人士進行此項工作。

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України .

Safety Information

• When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.

• Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us.

• Avoid water and wet locations.

Explanation of the symbols on the product label

Symbol Explanation

AC voltage

Class II equipment

Indoor use only

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

14

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 1000 Mbit/s 300 m
  • Gigabit Ethernet
  • White

Related manuals