smart Living Keyfree Connected Smart Lock Manual Please read the intructions before fitting and using the Keyfree Connected lock. The functions and design of this product can be changed without prior notice for performance and quality improvements. The smarter way to protect your home• Keyfree manual 2014-2_ .qxd 08/12/2015 10:17 am Page 2 INTRODUCTION Keyfree Helpine: 01902 364606 Email: [email protected] Website: www.yale.co.uk 2 Keyfree manual 2014-2_ .qxd 08/12/2015 10:17 am Page 3 CONTENTS Introduction Getting Started Smart Home Extra Features Safety Precautions 4 Product Features 5 Lock Overview 7 Set/Change Master Code 8 Set/Delete User Code 9 Opening and locking 11 Set One Day Codes 12 Register/Delete Key Fobs 14 Change Relock Time 16 Silent Mode On/Off 18 Connecting to a Home Automation System 20 Child Safety Mode 22 Passage Mode 22 Handle Alarm 22 Intrusion Alarm 23 Incorrect PIN Lockout 24 Emergency Power 25 Resetting the lock 26 User Code Log 29 Key Fob log 30 3 Keyfree manual 2014-2_ .qxd 08/12/2015 10:17 am Page 4 Safety Precautions Please read this carefully Locking from the outside When you leave your home be sure to lift up the handle in the given time so the door is fully secure. Be careful not to let any unauthorized users discover your PIN code. Please keep your PIN code safe. To maintain the high quality finish, clean regularly with a soft damp cloth taking care not to scratch the finish. Do not use any chemicals when cleaning as this may affect your warranty. Locking from the inside Press button & lift inner handle until. Red LED will show. If the inner handle is not lifted to securely lock your door, the door is held on the latch only. Caution 4 Please ensure the button is fully depressed when opening or locking your door from the inside. For total peace of mind, please store your back up key in a safe & convenient place. If the button does not pop up when you release the lever, please slightly lift up the inside lever to make the button pop up for the best security. Make sure to follow the above instructions to avoid any injuries or damage to the product . Keyfree manual 2014-2_ .qxd 08/12/2015 10:17 am Page 5 1. Introduction Product Features Electronic PIN Code System You can open the door conveniently with up 20 configurable PIN codes, allowing Keyfree access. 2. Smart Home Connectivity (Optional) By adding the corresponding module, your Keyfree lock can be integrated with your home automation system. 3. Key Fob Entry (Optional) A Yale key fob can be assigned to allow the lock to be unlocked remotely. 4. Emergency Backup In the event of power failure in the lock, a 9 volt battery (PP3) can be connected to the front of the lock to provide backup power 5. Alarmed Door Lock The Keyfree lock has a built in damage alarm, if the keypad area is damaged an 80dB alarm will sound 6. Basic Security Locking The outside handle will automatically disengage once you have entered your home to prevent anyone from following in behind you. 7. Emergency Escape Feature In the event of an emergency the inside handle will always be engaged, allowing escape without first having to unlock the door. 5 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 6 Lock Overview Basic Contents The contents of this product may be subject to change without notice for performance or quality improvement. ¨ Basic Contents smar t Living Living Keyfree Connected nnecte Smart Lock Installation Manual Manua Please read the intructions before fitting and using the Keyfree Connected lock. The functions and design of this product can be changed without prior notice for performance and quality improvements. smarter way to protect protect ct your ur home The smarter Front (Front Body) Back (Main Body) ¨ Optional Accessories Key Fob (Optional) 6 Home Automation Module (Optional) Cylinder User Guide Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 7 Lock Overview Front Body, install onofthethe outside of the door) (Front Body, installed(Front on the outside door) Pull down Emergency Cover ?5 ?1 ?6 (Sold separately) ?7 ?8 2? ?4 Keypad (10-Key) 2 Enter button 3 Lever Handle 4 button 5 Emergency Power Supply Terminal 6 Reset button 7 Keyhole 8 Emergency Cover Getting Started 9V Emergency battery 1 3? Back ?1 (Back Body, installed on the inside of the door) 1 Battery Cover ?6 2 LED Indicator ?7 3 Lever Handle ?8 4 Speaker Hole ?9 5 Screw Hole 6 Slot for Remote control module (Optional) 10 ? ?2 11 ? ?3 7 I button 8 Passage Mode/Button 9 Push Button 12 ? 1.5V AA Alkaline Batteries 10 Lock case 11 Latch Bolt 12 Dead Bolt to securely lock 4 ? 5? 7 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 8 Changing Master Code Registration The master code is the main password to the lock. As well as allowing entry through the door, it is also used to configure the lock including adding and removing users. Step Icon Expected Feedback Press any button Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you are setting the code for the first time the default is 123456. Select the [1] button followed by # key 2 tone beep You are now in the lock’s menu, choose option number 1 to change the master code. Enter a new master code Press the # button 8 Description The master code must be 6 digits Voice saying “completed” This completes the master code setup. Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 9 Setting a User Code The lock can hold up to 20 unique user codes, each one has a slot in the locks memory from 1 to 20. If a new code is written to a slot that already holds a code it will overwrite it. Because of this it is important to record which codes are stored in each slot. Please use the section in the back of the book to record this. Icon Expected Feedback Press any button Getting Started Step Description Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Select the [2] button followed by # key 2 tone beep You are now in the lock’s menu, choose option number 2 to select the user code setup. Press the [1] button and then # 2 tone beep Option number 1 adds or modifies a user code Enter the slot number for the user code followed by # key This is the number of the slot in memory where the code will be saved (1-20) Enter the new user code followed by # key 3 tone ascending beep The user code can be between 4-10 digits Press the # button to finish. Voice saying “completed” The user code will now be added to the lock. To add multiple codes please complete the above instructions, record that the memory slot has been filled in the user code log at the back of this guide, then repeat this process. 9 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 10 Deleting a User Code To stop a user having access their code will need to be deleted. Before doing this you will first need to know which slot in the locks memory their code is in. Please see the user code log at the back of the guide. Step Icon Expected Feedback Press any button Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Select the [2] button followed by # key 2 tone beep You are now in the lock’s menu, choose option number 2 to select the user code setup. Press the [2] button and then # 2 tone beep Option number 2 deletes a user code 3 Tone Ascending beep This is the number of the slot in memory where the code will be saved (1-20) Enter the slot number for the user code followed by # key Press the # button to finish. 10 Description Voice saying “completed” The user code will now be deleted from the lock. Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 11 Opening & Locking Securely Locking Your Door Inside: Press push button & lift the handle. This can be done anytime and will always fully secure your door. Outside: Close the door and lift up the handle within the set connection time Once the outside handle disengages you must enter your PIN or press any button on the key fob and lift up the handle within the connection time to securely lock your door. Locked Front handle engage If the time expires you need to re-engage the handle to securely lock your door. You can re-engage by pressing the remote, pressing the inner lever down or entering your pin. Front handle not engaged after the outside handle relocks Exception : In the Passage mode, Getting Started Unlocked the handle is operable all the time. The automatic relock time can be varied by user setting. Refer to section “settings”. (Optional) IMPORTANT Your door is only securely locked when the inside handle is lifted up & red LED shows. Opening Your Door PIN Code _ Enter registered PIN code Press any button _ _ Press (Enter) button Press the outer handle down Remote Control (Optional) _ Simply press any button on the key fob Press the outer handle down 11 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 12 Setting a One Day Code The one day code is a code that will automatically expire after 24 hours. This allows short term access to be granted to someone. Step Icon Expected Feedback Press any button Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Select the [5] button followed by # key 2 tone beep You are now in the lock’s menu, choose option number 5 to enter the one day code settings. Enter the new user code 2 tone beep The user code must be 4 digits Press the # button to finish. 12 Description Voice saying “completed” The code will now be active for 24 hours Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 13 Deleting a One Day Code A one day code can be deleted if it is no longer wanted. If not it will expire at the end of the 24 hour period. Step Icon Expected Feedback Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Select the [5] button followed by # key 2 tone beep You are now in the lock’s menu, choose option number 5 to enter the one day code settings. Press the # button to finish. Voice saying “completed” Getting Started Press any button Description Press the # to confirm code deletion. 13 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 14 Register Key Fob Yale key fobs allow you to open the lock at a distance of up to 15 metres. This requires both the Yale key fob and the corresponding lock module to work. Up to 5 key fobs can be registered on 1 lock, and like the user codes they each have their unique slot in the lock memory. Adding a new fob into a slot that already contains a fob will override it. Step Icon Expected Feedback Press any button Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Select the [3] button followed by # key 2 tone beep You are now in the lock’s menu, option 3 contains the key fob settings. Select the [1] button followed by # key 2 tone beep This puts the lock into fob add mode Enter the slot number for the fob followed by # 2 tone beep Select the number of the slot in memory where the fob will be saved (1-5) Push both unlock buttons on key fob Single beep Press both buttons as shown in diagram below. Press the # button to confirm. Press the # button to finish. 14 Description 3 tone ascending beep Voice saying “completed” The fob will now unlock the lock. This adds the fob to the lock memory Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 15 Delete Previously Paired Key Fob If a key fob is lost or stolen it can be removed from the lock so that it can no longer be used to open it. Step Icon Expected Feedback Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Select the [3] button followed by # key 2 tone beep You are now in the lock’s menu, option 3 contains the key fob settings Press the [2] button followed by # key 2 tone beep This puts the lock into fob delete mode. Enter the slot number for the fob followed by # 2 tone beep, then 3 tone ascending beep Select the number of the slot in memory where the fob is saved (1-5) Press the # button to finish. Voice saying “completed” Getting Started Press any button Description The fob will now not unlock the lock. 15 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 16 Change PIN Relock Time The relock time is the amount of time it takes for the external handle to disengage after the lock has been unlocked with a correct PIN. The default is 7 seconds. Step Icon Expected Feedback Press any button Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Select the [6] button followed by # key 2 tone beep You are now in the lock’s menu, option 6 contains the pin relock settings. The relock time can be between 7 and 60 seconds. Input the relock time (7-60) Press the # button to finish. 16 Description Voice saying “completed” The relock time will now be set. Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 17 Change Remote Relock Time The lock can be set to unlock for longer periods of time unlocked remotely by a key fob or a home automation system. Step Icon Expected Feedback Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Select the [7] button followed by # key 2 tone beep You are now in the lock’s menu, option 7 contains the key fob relock settings The relock time can be between 10 and 90 seconds i.e. 50 = 50 seconds. Input the relock time (10-90) Press the # button to finish. Getting Started Press any button Description Voice saying “completed” The relock time will now be set. 17 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 18 Silent Mode On/Off The lock can be toggled between two modes. Sound assisted mode will provide a variety of sounds to provide feedback from the lock, where as in the default silent mode the only sounds will be an alarm, a low battery warning and feedback while changing settings in the lock’s menu. Step Icon Expected Feedback Press any button Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Select the [8] button followed by # key 2 tone beep You are now in the lock’s menu, option 8 contains the silent mode settings. Press [1] to for silent mode or [2] for sound assisted mode. Press the # button to finish. 18 Description Select between the two modes Fanfare sound and voice saying “silent mode on/off” Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 19 Smart Home Lock Module The Yale Keyfree lock can have a removable wireless communication module within the lock. This module is used for all wireless communications to both home automation systems and key fobs. In order to connect to a home automation system a new module may be required for the lock, however changing the module has the potential to disrupt the current wireless communications. For instance while a new module may allow the lock to connect to a home automation system, it could cause the key fob to stop working. An up to date list of compatible home automation systems and the corresponding lock modules is available at the following address on the Yale website: www.yale.co.uk/YaleEcosystem To find out which module is currently in your lock please follow the ‘removing a module’ instructions. Step Icon Remove inside cover Description Smart Home Removing the module. Slide up the black plastic cover of the lock on the inside of the door. Remove a battery from the lock Remove any of the batteries to cut power to the lock. Remove the module The module is situated in the top left corner above the [P] button. It can be unplugged by pulling it out. Record module model number The model number will be on a sticker on the module, and will enable you to find the current wireless compatibility of the lock. Inserting a Module Step Remove inside cover Icon Description Slide up the black plastic cover of the lock on the inside of the door. Remove a battery from the lock Remove any of the batteries to cut power to the lock. Insert the module The module has 8 pins that are plugged into the small black connector above the [P] button on the top left of the lock. 19 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 20 Smart Home Connecting to a Home Automation System Connecting to a home automation system is a two way process and may require the home automation system to be configured to look for a new device, please consult the manual that came with the system for more information. Step Icon Expected Feedback Press any button Description Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Press the [4] button followed by # key 2 tone beep You are now in the lock’s menu, option 4 contains the home automation settings 2 tone beep This will make the lock look for a compatible system. If the lock makes a short set of error beeps it will need disconnecting from an existing system. Follow steps on page 21. Press the [1] button followed by the hash key Please wait up to 60 seconds Voice saying “completed” The lock will now be linked to the home automation system. Please Note: You cannot use a keyfob and use the keyfree connected Smart Lock with a Home Automation System. 20 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 21 Smart Home Disconnecting from a Home Automation System For security reasons a lock will not connect to a new home automation system if it is linked to another. If you have changed your home automation system please run through the disconnecting settings before adding the new one. Step Icon Expected Feedback Press any button on the keypad to begin Enter the master code, followed by # key 2 tone beep If you have forgotten the master code please see the resetting the lock section of the manual. Press the [4] button followed by # key 2 tone beep You are now in the lock’s menu, option 4 contains the home automation settings Press the [2] button followed by the hash key 2 tone beep. Completed. This will disconnect the lock from the previous system Smart Home Press any button Description 21 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 22 Extra Features Child Safety Mode With child safety mode activated, depressing inside handle will sound the alarm for 10 seconds to notify the door is open to any persons inside. Inputting your pin or pressing the key fob will cancel the alarm. If required the mode will then need to be activated. Step Icon Press and hold the passage mode button (above batteries) for 5 seconds. Description HOLD Open the battery cover then press and hold the passage mode button for 5 seconds to activate the child safety mode. Replace the battery cover. Passage Mode When passage mode is active, the outside handle will not relock allowing you to enter without entering the code. Step Icon Description Open the battery cover and press the P button. You will hear the lock unlock. NOTE: The lock will remain insecure until passage mode has been stopped. To stop passage mode press the passage mode button or lift the handle. Press the passage mode button Handle Alarm WhenNote the handle alarm is set, any operation of the handle from inside will sound the alarm for 3 minutes. Inputting in your PIN or by pressing your key fob will disable the handle alarm setting. Step Description Press any button Press any button. Enter PIN code Enter the registered PIN code in the keypad. Press and hold the for 5 Sec. 22 Icon HOLD Press the [#] button for 5 seconds. (The beeping sound sets off for 3 times.) Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 23 Extra Features Intrusion Alarm The alarm sound continues for 30 minutes or until it is disarmed. Damage Alarm : If the circuit board of outer handle is damaged the 80db alarm will sound. Directions Or if the front handle is seperated from the door. 23 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 24 Extra Features Incorrect PIN Lockout For security if the wrong PIN is entered 5 consecutive times the lock will lockout for 3 minutes. This is indicated by the lights on the keypad flashing. To Release Lockout Method Method Method 24 1 2 3 Press any button inside of battery cover. Depress inside lever handle. Press any key fob button. Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 25 Emergency Power Emergency Power Supply for Discharged Batteries If the batteries in the lock have completely failed emergency power can be provided by a 9V battery on the front body. To Supply Emergency Power Step Icon Description Contact the 9V battery Open the emergency cover. Keep contacting the 9V battery onto the emergency power supply terminal. Press any button Press any button Enter PIN code Enter the registered PIN code in the keypad. Press Enter button Press button to activate the outer handle. Expiry Period The product uses four 1.5V(LR6) alkaline AA batteries. The batteries will last approximately 1 year based on the lock being used 10 times a day. (Users are advised to use authentic alkaline batteries.) Low Battery Alarm Low Battery Lamp (red) You must replace all 4 batteries for the following cases: * The Low Battery LED on the back body flickers red. * The voice guide sounds (“Low Battery”) RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE WASTE BATTERIES REGULATIONS. “Low Battery” back body The battery life varies according to ambient temperature, humidity, frequency of use and the quality of the battery. Do not use rechareable batteries. Only alkaline batteries are recommended. 25 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 26 Resetting the Lock In the event of losing the master code to the lock, the lock will need to be reset back to factory default settings. This will result in the master code being set to the factory default which is ‘123456’. Step Icon Description Remove inside cover Slide up the black plastic cover of the lock on the inside of the door. Remove a battery from inside the lock. Then remove the module. Take out any battery to remove the power from the lock. Unscrew the two screws on the back to remove the rear cover. The top screw is located below the [I] and [P] buttons while the bottom screw is behind the rubber plug under the speaker hole. Disconnect the cable that runs to the exterior half of the lock. Disconnect the cable that runs through the door to the exterior unit. Press and hold the [I] button and [P] button. Continue holding the buttons and insert battery. Continue holding these buttons until the ready sound is heard in step 6. Wait for 10 seconds, a two tone sound will be heard. Release the [I] and [P] buttons Within 5 seconds of the two tone sound reconnect the cable running to the exterior escutcheon. The lock will play a three tone ascending tone and say “welcome to the Yale digital world” the master code is now set to 123456. 26 Do not release until a two tone is heard. Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 27 Specifications Specifications Operating Temperature -15˚C - 55˚C (5-131˚ F) Lasts appoximately 1 year (when lock is used 10 times a day) Contact Details Keyfree Helpine: 01902 364606 Email: [email protected] Website: www.yale.co.uk 27 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 28 Warranty 2 Year Guarantee Statement This product is guaranteed for consumers against faulty workmanship, materials and function for a period of 2 years from the date of purchase providing the full installation and maintenance instructions are followed. Please keep your proof of purchase safe, this must be submitted when making a claim under this guarantee. Please note that it is a condition of this guarantee that your Yale product: š +DVEHHQFRUUHFWO\LQVWDOOHGDQGPDLQWDLQHGLQDFFRUGDQFHZLWKWKH Yale installation and maintenance instructions provided to you at the time of purchase. š +DVQRWEHHQPRGLıHGRUGDPDJHGLQDQ\ZD\ š +DVQRWEHHQVXEMHFWHGWRXQDXWKRUL]HGUHSDLUV Yale are responsible under this guarantee for repairing the product or replacing the product as we deem necessary. If there is fault with the product, please contact Customer Services on 01902 364647, who ZLOOJLYH\RXWKHQDPHRIDQH[SHUWDQGFRQıUPZKDW\RXQHHGWRGR to make a claim under this guarantee. Please do not carry out any repairs without our authority or by using an unauthorised expert. Any repairs or other works carried out without our DXWKRUL]DWLRQRUE\XVLQJDQXQDXWKRUL]HGH[SHUWZLOOQRWEHFRYHUHG under this guarantee. This guarantee is non transferrable and applies to products purchased in the United Kingdom only. This guarantee does not apply to normal wear and tear. This does not affect your statutory rights. A full copy of this guarantee is available upon request by writing to Yale UK, School Street, Willenhall, West Midlands. WV13 3PW or by visiting our website www.yale.co.uk. 28 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 29 User Code Log Pin Codes Slot Number Name Pin Code (Optional) 1 2 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 29 Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 30 Key Fob Log Key Fob Slot Number 1 2 3 4 5 30 Name Keyfree manual 2014-2_ .qxd 08/12/2015 10:18 am Page 31 smart Living The smarter way to protect your home•
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021