Formufit F00190E-UV 1 in. Furniture Grade PVC 90-Degree Elbow in Clear Instructions / Assembly

Formufit F00190E-UV 1 in. Furniture Grade PVC 90-Degree Elbow in Clear Instructions / Assembly
PRODUCT INSTRUCTIONS
90 Degree PVC Fitting
FORMUFIT 90 Degree PVC Fittings can accept up to two (2) segment of PVC pipe and can be
used to create perfect right angles in PVC pipe projects. To connect this product to PVC pipe,
follow the instructions shown below.
Assembly
1
2
Slip a segment of PVC pipe inside one
of the sockets on the 90 Degree fitting.
Push or tap into place until the pipe
hits the stop inside of the socket.
Repeat for each additional socket.
Securing
For permanent and strong connections, it is recommended to use PVC cement/solvent to
attach the PVC pipe and 90 Degree PVC Elbow fitting.
You can also temporarily connect this fitting by driving a self-tapping screw where the pipe
and fitting meet, or apply electrical tape over the end of the pipe before inserting into the
fitting for a temporary, yet strong connection.
All rights reserved. TM,
® & Copyright © 2009-2018 FORMUFIT LC
https://formufit.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement