Montana Woodworks MWPSB4V Montana Clear Lacquered 48 in. Plank Bench Use and Care Manual

Use and Care Instructions

If purchasing item “Ready to Finish” special care must be taken to properly apply a exterior grade final finish in a timely manner. Doing so will help protect your purchase from discoloration and damage caused by ultra-violet light and exposure to weather.

Once the item is finished or if you have purchased an item that was prefinished by our factory, follow the steps below to ensure its attractiveness and the longevity.



Inspect and re-inspect the item annually. o Look for areas of discoloration. o Sprinkle piece with water to determine if water still beads up.

Look for areas of raised wood grain or “roughness”.



If any of these conditions are observed, follow the manufacturer’s directions for the reapplication of finish. This will again restore the beauty and durability of the finish to its original condition.



Most finish manufacturers recommend a re-application of their product at specified intervals to continue the protection afforded by the finish.



If you have purchased your item “Ready to Finish” and have finished it yourself, please refer to the original product manufacturer’s specifications on when to re-apply the product.



If you purchased your product prefinished by our factory, the final finish manufacturer,

Finish Works, recommends re-application every three years or as necessary to protect the item.



You may purchase the same high quality exterior finishes we use by calling: o Finish Works, 1.260.768.3220