Suggestions For Installation of Your Fence
1. Build on 3-Rails
Use 3-rails in new construction or add a 3rd rail when remodeling.
A: Top rail should be 6 inches from the tip of fence.
B: Bottom rail should be 6 inches from the bottom of fence.
C: Center the middle rail between top and bottom rail.
D: Add a cap rail to help control the expansion and contraction of your wood fence (this rail is in addition to the 3-rails used to
construct your fence).
2. Avoid Ground Contact
3. Use Galvanized or Stainless Fasteners
4. Per ASTM F537-01 (2007) Wood Fence Design Specifications allow for 1/8" space between boards
Design and build your fence allowing for expansion and contraction.
For Example:
A: Build with 1/8" space between boards.
B: Allow boards to overlap from front to back.
C: Space bottom boards 4" apart.
Nail top boards over the 4" space (the 4" space is only applicable when using 6" boards).
A: Privacy Fence B: Shadow Box Fence C: Board/Batten Privacy Fence
Allow 1/8" space for expansion and contraction
Copyright © 2016 Alta Forest Products, Inc. All rights reserved. WRCIF408-1
Notice overlap Space bottom boards
4" apart
(when using 6" boards)
www.AltaFP.com