WIRELESS KIT
© QUICK USER GUIDE
Statement
Thank you for purchasing our product! This quick user guide will talk about
main usages of the product.More information can be found on our website
and the help center. This user guide may contain inaccurate content due to
hardware and software upgrade.lt is subject to change without previous notice.
Xx Safety Caution
O Please do not put any fluid container on the product.
@ Please use the product in ventilated environment and prevent blocking
the vents.
© Please use included power supply with the product to prevent damage to
the product.
@ Please use the product under its standard working temperature and
humidity.(advised in this manual or distributor's website)
O Dust on PCB may cause short circuit.It is suggested to clean the dust on
PCB timely to make the product work properly.
@ Please obey the regulation and policy in your country and area during the
installation of this.
1759 Out Of Box Audit
After receiving the product,please check all products and accessording to
distributor's Package Includes information.If any is missed or damaged,
please contact the distributor.
Item
WIFI NVR
Screw screws for HDD
DC 12V2A
User manual
WIFI IP Camera
DC 12V1A
Screw
Antenna Extension Cord
©9 | >11 | ©) | Сл | > |
Before Installation
This product may require cabling , we suggest to test all products&parts
before installation and cabling.
@ WIFI Antenna Ports:Double antennas 4) HDMI Port:For viewing on HDTV;
to WIFI range; O USB Ports:For mouse and backup;
OQ WAN Port:Connect your NVR to Internet; O Power Input
@ VGA Port:For viewing on VGA monitor,
BP IPC
ES
@wrFi antenna:WiFi connection with NVR
@ DC Port: Input power 12V 1A;
€) RJ45 Port: For matching code and wired connection between IPC and NVR. Our
WIFI NVR KIT is already matched code before leaving factory. If users need to
re-match code or use wired connection, please refer to how to add IP camera as
below.
t=="1 Installation Instruction Of WIFI NVR KIT
al то
Power E = =
Ce Display device
y
ee = >)
Power
e (a) -
ROUTER
Video In
Note:
Wireless NVR can't be connected to WIFI router wirelessly at present.
They can be only connected by network cable.
xXx Setup The System
This system is standalone with embedded Linux Operating System in the
NVR. Just like a desktop PC, need to hook a screen to the NVR to enter the
OS. Any TV , monitor with VGA or HDMI input should work for it.
oO Install antennas for cameras and the NVR;
@ Connect a screen to the NVR via its HDMI or VGA port(HDMI and VGA cable not
included);
© Plug the NVR to power(use bigger 12V 2A power adapter;
O Plug cameras to power(use smaller 12V 1A power adapters);
® Within seconds, you should see camera's images on the screen;
@ Plug the mouse(included)to an USB port on back of NVR. You shall then be able to
operate on the system.
In the OS you can find fullest functionalities including live view, record,
playback, video backup and all settings.
Default ID: admin Password: none (means leaving the password empty,
just click login).
Tips: To protect your privacy, please set your password at earliest
convenience. Right click the mouse—Go to System Setup—System Admin
— User Management to set password.
>» HD Install
the system may not include hard disk depending on the kit you selected.
the NVR works most 3.5" SATA HDD or 2.5"SATA HDD
@ Unplug your NVR from
power, unscrew and
remove the top cover.
@ Connect the SATA power and
data cables from the NVR to the
corresponding ports on your
HDD (as shown).
© holding the hard drive and the DVR ,gently turn it over and line up the holes on
the hard drive with the holes on the NVR. using a phillips screwdriver,screw the
provided screws into the holes .assemble the cover
Steps to install a hard drive (if your system has preinstalled HDD, please
skip this step).
ИЗ! Record Video
Record video is very easy on camera system.
O Timing Record: set time periods you want the NVR to record. Click right button
—System Setup—Record setup—Record Plan; here you can setup periods you
want the NVR to record. Everyday 0:00:00-23:59:59 means 24x7 recording. The
system records 24x7 by default when it detects hard disk.
@ Manual Record: the shortcut to turn on record. Click right button—Manual Record;
you can turn ON or turn OFF the record of certain channels. Red dot on right
above corner means manual record is ON .
© Motion Record: Motion Record means certain channel(s) will be recorded only when
movement is detected. Click right button— System setup— Record setup—Record
Plan; by unselecting Time and selecting Motion, the channel will record only when
motion detected.
3B Playback Video On NVR
In the NVR system, right click the mouse— Choose Video playback—Choose
Manual search; you will enter the Video Playback system. Specify channels
and time, you can search out videos. Click playback to start play record videos.
Video playback
Channel UI V1 V2 V3 V4 V5 Ve ES:
Record mode Y TEE
Search time 2015/12/26 00 :00 - 23 :59
Cancel
E Video Backup
Use U disk to copy video, so easy and convenient !
O 2 USB port: Plug U flash disk into the USB port of NVR. Right click on main menu
—video backup—choose backup channel—choose video mode—setup searching
time—search—choose recording file on the list—video backup (support 32G U flash
disk at max. Recording file is packed one hour per time.)
9 1 USB port: Right click on main menu—video backup—choose backup channel
—choose video mode—setup searching time—search—choose recording file on the
list—video backup, insert U flash disk within reminding 1 minute, then the system
will backup recording file to U flash disk.
Video backup
Channel TU AEREAS
Record mode V Manual Ai ¥ Motion Sensor
Search time 2015/12/26 00 :00 - 23 :59 PTT
ID | Channel | Mode Begin time End time Duration Size |Select
Manual 16:00:00 16:26:05 00:26:05 | 381M
Manual 15:00:00 15:59:59 00:59:59 258M
Manual 14:34:46 14:59:59 | 00:25:13 | 102M
Manual 14:31:20 14:33:49 | 00:02:29 LEA, |
Manual 14:00:00 14:30:04 | 00:30:04 | 133M
Manual 13:56:35 13:59:59 | 00:03:24 13M
Cancel
æ View On PC Via lE(Internet Explorer)
@ When your PC is in same LAN with the NVR (normally means they are
connected to the same router)
Step1.Find the IP address and port# of your NVR(IP address can be found in
System Setup—Network Setup).
Channel Setup System Admin
DHCP
Y ESee(P2P) 493143277 (ONLINE) Show QR Code
IP address 192.168. 1. 77
Subnet mask 255.255.255. 0
Gateway 192.168. 1. 1
MAC address 0005 -FESA-736E
Preferred DNS 202. 96.134. 33
Web port 80
Network Bandwidth 100 MB/s
Net Diagnose Info ¥ Enable
Network Status
Step2. Enter the NVR's IP address in your IE browser for example: http://192.1.1.7
(If the default WEB port 80 has been changed e.g. to 100,you’ll need to add new
port number when input IP address in the browser, for
example: http://192.168.1.7:100).
E A. le) =| @ 88
@ When your PC is out of local area network with the NVR(For example:
view your home cameras from your office PC).
Access with Device Cloud ID
Step 1. Open your Internet Explorer(lE) browser and visit: www.e-seenet.com.
Step2. Input Device ID, User name and password to login.
(Device ID can be found at the right bottom corner of the NVR monitor, status should
be “ONLINE”, default User name is “admin”, and default Password is empty.)
—1 View On Mobile
@ Download the APP “IP PRO”
You can either scan the QR-Code below to find the free mobile app, or
search“IP PRO”on APP store/Google play to find it. Download and install
it. Then run the APP and spend minutes to register an account.
Q IP-PRO 1 Results ©
€ Everyone
y
INSTALL
Downloads Libraries & Similar
Demo
IP PRO, 24 Hour Remote Video
Surveillance Moblie Application
READ MORE
APP download
8923 2%
iPhone APP Google play APP
WIRELESS KI QUICK USER GUIDE
Step 2. Add repeater
Split screen: change status of live view. You can choose to view Yu il Extend Wd Range As picture shown below, click icon + besides channel 3, choose other channel.
multiple cameras or any single camera.
O Add the NVR system to your APP device list
Run the APP “IP PRO”, login with your account or choose Trial—Click"+”
to “Add device by ID” (find it the NVR's Network setup, or right bottom e Svetem celu Ava NES 1reless connection s easy and convenient, But 1S not universal application
corner on screen),Description(e.g. Home Camera), User name (default e Video playback: playback recorded videos q g going
user name is “admin”)and password(default is empty)— Submit to get e Video backup: backup recorded videos through some obstacles. Some methods can be applied to bypass obstacles
back to your device list—Click the device to view the cameras. e Color adjust: adjust the image setting of each camera and extend WIFI range.
Tips: if you've set a password on your NVR system, please update your © ve er honed © cena the record Sous ; > Position the Antenna Correctly
: me: У m I meras(wor n r I mer
password on AFF to view. . Setup Wizard. step by step quid of o general settings cameras) WIFI range is like an apple and the antenna of NVR is in the center of it. WIFI
Group - 0 E < Add device a My Device % ® Fast Network: shortcut to network settings signal is strong all around the WIFI range. Antenna of NVR should be put
E E ® Adadevice by ID E | сома о = Ge e Exit System: logout, reboot, close screen output and shut down the system straight up, if not, WIFI signal will be weak. According to the signal transmission
| E Md devceby iy оон МУ Рене character of antenna, the antenna of cameras should overlap or parallel to
E ey Le User Name admin > Sys tem setup NVR WIFI range, as pictures showed below: Step 3. As picture shown below, it means IPC1 is connected to NVR through
a © Network Password IPC2 and IPC3. IPC2 is connected to NVR through IPC3. IPC3 is connected
Channels
to NVR directly.
@ AP configuration
Click right button—Choose System setup; you then shall enter the menu that
enables you to do all settings related to this system.
1 4 6 8 9 1216 24 25 32 36
— Q Acoustic wave
la 5 confirgure
—
® General setup © System admin
(This enables you to set) (This enables you to set)
Language System version
PTZ D Playback Time System maintenance including
Display resolution system upgrade
о oO —>
a © = = _ = Name each camera User and password management
Auto switch from 1 camera to another Restore to default settings —
System log correct method fault method
= o Record setu Connect Information
D Playback On Mobiles Thi bl > t t HDD informa = Channel Rate
= (This enables you to set) e Channel set > Use Antenna Extension Cord to prolong WIFI
Record plan for each channel video up di
In the IP PRO APP, while viewing live video of the system, click Playback, detection (This enables you to set) istance
you will enter the remote playback menu. The APP automatically playback ® Network setup(This enables you to set) Manage channels and cameras Installation method of antenna extension cord
camera 1, you can switch channels the CH. All network related settings. (A
Tips: Videos in playback are HD@real time which requires very good
transmission condition. We suggest to playback in LAN. Remote playback LIS Xiension Cord
Refresh Cancel
A) Delete Repeater
Move the mouse to targeted channels, left click to delete, and then click
Notes: When WIFI signal is not strong enough against walls, users can take “Apply” and “OK”.
off the original antenna and subtitute antenna extension cord. Drill a hole on
the wall to let the extension cord go through and simply put it where WIFI
signal is strong. <> Application Example
> set up cascading connection in a reasonable
| MN
out of LAN may not 100% work due to connection &network condition. сов Add Cameras ° IP Camera
(LA
My Device2 20)
My Device2:1
Before leaving factory, NVR kit is already matched code, the image will come
out when the kit is powered. Anyway, there is range limitation for the WIFI
signal from NVR. When cameras are out of this range, they can't be
connected to NVR wirelessly. Then users can use network cable to connect
cameras and NVR, as picture showed below:
CT
Window——
PTZ D Playback ЧЕ _ В es . . . . .
) aE | - dell « solution, extend wifi signal transfer distance As picture shown above, when IPCAM1 is put somewhere is out of NVR
= = WIFI range, and there is IPCAM2 between them with strong WIFI signal,
a Note: users can put IPCAM1 close to NVR and power it, setup IPCAM1 repeated
O Repeater function can't strengthen WIFI signal for wireless NVR Kit, but can extend
J) MENU-DOWhat Only wen the repeater cameras and repo
. . . i Only when the repeater cameras and repeated cameras are positioned correctly,
Right click on main menu and click video management, and enter the interface. @ у р Р Р y
by IPCAM2, and then install IPCAM1 to the presupposed place.
WIFI distance will be extended. IPCAM1
> Menu bar There are two ways to add IPC, “ match code” and “auto add”. €) Repeater function and 3 meters antenna extension cord are two methods to extend
Choose “auto add”, cameras will transmit video image to NVR by network WIFI range. Users can choose one according to real situation.
Click right button you can enter the main menu; click right button again you cable;
can exit the current menu or return. If users need to re-match code, cameras will transmit video image to NVR = Repeater Setup
wirelessly, and IP address is 172.20.14.X.
58 Split screen pp
Step 1. Right click on NVR’S GUI, left click “video management” — then left
актеров? КО) ато
Notes:
ww Video Manage
ff video playback Pp
[A Video backup |
IP address
& Color adjust
172.20.14.31
Device will not in guarantee if caused by below reason:
172.20.14.33
> PTZ control
O Accident;negligence;disaster;mis-operation.
@ Do not conform to the environment and conditions,such as
power improper,working temperature too hight or too low,
Manual record
СГ Volume
E
o® Setup Wizard IP address
172.20.14.31
172.20.14.32
172.20.14.33
E System Mode
lightning stroke.ect.
© Ever be maintained by other center which not belong to the
real factory.
O Goods already sold more than 12 months.
A Fast network
urce
Remaining network bandwidth: 25Mbps
D Exit System
maining network bandwidth: 53Mbps
ok
">
