Item #1001 025 205
Model #L-GZ916PST-D
USE AND CARE GUIDE
L-GZ916PST-D
TIERNEY GAZEBO
Thank you for your purchase! We are pleased that you have chosen Sunjoy for your outdoor furniture purchase.
Our clear, easy o follow, step by step instructions will guide you through the project from start to finish.
Please do not return this product to the store. For technical assistance or replacement parts, please call Sunjoy Group at 1 (866) 578-6569 anytime .
You may fax your replacement parts form (which is included in the packaging)to 1 (740) 283-3549 or email to
Production Number ： 20184434
Table of Contents
Table of Contents .......................................................... 2
Safety Information ......................................................... 2
Warranty ......................................................................... 2
What is Covered .......................................................................2
What is Not Covered ................................................................2
Pre-Assembly ................................................................ 3
Planning assembly ...................................................................3
Hardware Included ...................................................................3
Package Contents ................................................................ 4-5
Assembly .................................................................... 6-8
Care and Cleaning ........................................................ 9
Safety Information
1.
More than four people are required for this assembly.
2.
Some parts may contain sharp edges. Wear protective gloves.
3.
When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all instructions before assembly and usage.
CAUTION: Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly even death.
NOTICE: For outdoor use only.
Warranty
DANGER: This unit is heavy! Do not assemble this item alone.
WARNING: Do not leave the gazebo where there is a risk of high wind, as possible damage will occur to the structure.
WARNING: Keep all flame and heat sources away from this gazebo fabric. This Gazebo is made with fabric that meets CPAI-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the gazebo fabric may render the flame-resistant properties ineffective.
1 YEAR WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of 1 years.
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling or disassembling the product.
2
Pre-Assembly
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD ZZ
Part
AA
BB
CC
DD
EE
FF
GG
ZZ
EE
H02015C11
H19001C11
H02020C11
H14001C11
H02040C11
P12401A01001
P90701A07001
H00001C12
FF
Description
M6X15 Bolt
M6 Washer
M6X20 Bolt
M6 Nut
M6X40 Bolt
Stake φ 8*180
Ring
M6 Wrench
GG
Quantity
24
72
24
16
8
16
96
2
ADD
2
1
3
8
3
0
10
0
3
Pre-Assembly (continued)
PACKAGE CONTENTS
\
A
M
B1
N
B2
P
C
Q
E
R
F
S
T
G
H U
J
V
K
L
4
Pre-Assembly (continued)
Part
J
K
L
M
N
P
Q
G
H
E
F
A
B1
B2
C
T
U
R
S
V
P10803A01106
P10207A01106
P10410A01106
P10113A01106
P10206A01106
P10112A01106
P11606A01106
P11506A01106
P12601A01106
P00103A07001
P00104A07001
P00105A07001
P00202A06007
P00302A02901
Description
Connector of middle bottom beam
Cant beam bottom tube
Middle beam bottom tube
Connector for the large top
Cant beam of small top
Connector of the small top
Stake plate
Stake cover
Hook
Small canopy
Middle canopy
Large canopy
Curtain
Netting
Quantity
4
4
4
1
1
1
4
1
4
4
4
1
1
1
1
5
Assembly
1 NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
Set stake cover (N) into the post (A), then installed stake plate
(M) on the bottom post (A) by using bolts (AA), washer (BB).
2 NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
Insert the long screen end (B1) into the short screen (B2), fasten by using Bolt ((CC), washer (BB) and Nut (DD).
3 NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
Fix the mid beam connector(C) on the long screen (B1) and short screen (B2), by using Bolt (AA) and washer (BB).
4 NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
Attached the long / short screen (B1/B2) on the post (A) by using bolt (CC) and washer (BB).
6
Assembly (continued)
5 NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
Attached the cant support (P) to the long and short screen
(B1/B2), by using bolt (CC) and washer (BB).
6 NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
Insert cant beam end (E) into Cant beam bottom tube (G), then insert the cant beam other end (E) into big top connector (J), attached the cant beam bottom tube(G) to the Post (A) by using bolts (EE), washer
(BB) and nut (DD) ；
7 NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
Insert the Mid beam end (F) into the mid beam bottom tube (H), then insert the mid beam other end (F) into big top connector
(J), install the mid beam bottom tube (H) to mid beam connector(C) by using bolt (EE), washer (BB) and nut (DD).
8 NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
Insert the small top cant beam (K) into the small top connector
(L) ， spread the big canopy(T) on big top ， the spread the middle canopy (S) on middle top ， don’t spread completely ， then insert the small top cant beam(K) into cant beam (E) and attach the hook (Q) to the big top connector (J).
7
Assembly (continued)
9 NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
Fix the small canopy (R) to the small top cant beam
(K), then fix the middle canopy corner (S) to cant beam (E), fix the big canopy corner (T) to the cant beam bottom tube (G).
10 NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
Hang the netting(V) on screen (B1/B2) placed in the inside of the gazebo by using ring (GG); then hang the curtain (U) on the screen (B1/B2) by using ring (GG), placed in the outside of gazebo ； Fasten the gazebo on lawn by using stake.
11 NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
Tie the Velcro and strap on the post(A)
8
Care and Cleaning
□
Before using, clean the gazebo completely with a soft dry towel.
□
Do not put your gazebo in wet conditions where there is a risk of rust developing.
□ When not in use, store in a cool, dry area.
□
Our iron/steel components for garden accessories and patio items are coated with rust inhibiting paint that protects it from rusting.
However, due to the nature of iron, surface oxidation (rust) will occur once these protective coatings are scratched. This is a natural process and is not a defect! To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint. Surface rust can also be easily removed with
a light application of any rust removing solution, we also recommend WD-40, which is readily available in all major stores. If no immediate action is taken to get rid of the surface oxidation (rust), the oxidation (rust) may start dripping on to deck or patio causing unsightly stains, which may be difficult to remove. This can be prevented if the corrective preventative measures are taken to keep the product from further oxidation or rusting.
Made in China
9
