Summit Appliance BIM45 Installation guide

Summit Appliance BIM45 Installation guide
IMPORTANT INFORMATION
ABOUT YOUR ICEMAKER
This unit’s main power switch is located in the kickplate, not the rear as stated in
your use & care manual. In the event of flashing lights or an audible alarm, turn
this main power switch off and wait 30 seconds before turning it back on.
Power switch located in kickplate on the right side
The alarms may indicate that you have a kink or blockage in your drain hose.
Check the installation to prevent any leakage.
If you require technical support, please call our service department at 718-8933900 ext. 597 or email [email protected]
Summit Appliance Division · Felix Storch, Inc. · www.summitappliance.com · 718-893-3900 · [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement