Rest Rite HD35720QN Installation guide

Rest Rite HD35720QN Installation guide
Platform Bed
Contains One (1) Bed and Hardware
IMPORTANT NOTE:
Carefully remove all the parts from the box. Arrange on a flat
surface and verify you have all of the following parts and hardware.
PARTS AND HARDWARE LIST
A. Headboard
B. Footboard
(1 pc)
C. Frame
(1 pc)
D. Decorative Top Piece
(4 pcs)
(1 pc)
E. Headboard Leg
(2 pcs)
ASSEMBLY INSTRUCTIONS
STEP 1
C
Set the Frame (Part C) on its side and unfold it.
A
STEP 2
C
Rotate the two legs (one at the head of the bed and one at
the foot of the bed) until they lock into place. Note that these
two legs will be slightly off the floor to allow for uneven
floors. Set the frame up with the legs resting on the floor.
(Continued on back)
ASSEMBLY INSTRUCTIONS (CONTINUED)
D
STEP 3
STEP 4
A
B
D
D
D
E
A
E
Insert the Headboard Legs (Part E) into the Headboard
(Part A). Brackets on the legs should be facing the center
of the bed.
Install the Decorative Top Pieces (Part D) into the Headboard
(Part A) and Footboard (Part B) by turning the top pieces
until they are secured tightly.
A
STEP 5
C
B
Attach the Headboard (Part A) and the Footboard (Part B) to the Frame (Part C) by sliding the bolts on the ends of the frame
into the slots on the Headboard and Footboard. Your Platform Bed is now set up.
A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement