Whirlpool WRB329DMBW, WRB322DMHV, WRB329DMBM, WRB322DMBM, WRB322DMBB, WRB322DMBW, WRB329DMBB Installation guide

Whirlpool WRB329DMBW, WRB322DMHV, WRB329DMBM, WRB322DMBM, WRB322DMBB, WRB322DMBW, WRB329DMBB Installation guide
=> e e
Whirlpool Bottom Mount Refrigerator
PRODUCT MODEL NUMBERS
WRB322 WRB329
Electrical: A 115-volt, 60-Hz, AC-only, 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your refrigerator be
provided. Use an outlet that cannot be turned
off by a switch. Do not use an extension
cord.
NOTE: Before performing any type of
installation, cleaning, or removing a light
bulb, turn the control (Thermostat,
Refrigerator or Freezer Control depending on
the model) to OFF and then disconnect the
refrigerator from the electrical source. When
you are finished, reconnect the refrigerator to
the electrical source and reset the control
(Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired
setting. See “Using the Controls.”
Water: A cold water supply with water
pressure between 35 and 120 psi (241 and
827 kPa) is required to operate ice maker
and water dispenser. If you have questions
about your water pressure, call a licensed,
qualified plumber.
IMPORTANT: The pressure of the water
coming out of a reverse osmosis system
going to the water inlet valve of the
refrigerator needs to be between 35 and
120 psi (241 and 827 kPa).
Reverse Osmosis Water Supply: If a
reverse osmosis water filtration system is
connected to your cold water supply, the
water pressure to the reverse osmosis
system needs to be a minimum of 40 to
60 psi (276 to 414 kPa).
LOCATION REQUIREMENTS
PRODUCT DIMENSIONS
A
<<"
san 1
cabinet
+ |
> A С
по! incl» — \
handle \
e .
incl. и А | 90°
handle overa >
B > —>
top of 1
binet
cabine | —— Ly
A
У.
—
D
| |
Height - Depth - Depth - Depth - Depth - Depth -
Height - Top of |Doors Open| Drawer With Without Cabinet Width -
Model Overall Cabinet 90° Open Handles | Handles Only Cabinet
Number Model Size “A” “B” “С” “0” “Е” “FP” “С” “H”
70" 68%" 62" 50%" 33%" 30%" 28% 32%"
WRB32Z f22.1°cu. Tt. (177.8 cm) | (174 cm) | (157.5 cm) |(128.9 cm) | (84.8 cm) | (78.4 cm) | (71.4 cm) | (82.9 cm)
67" 65%" 59" 50%" 33%" 30%" 28% 29%"
ve 18.7 cu. ft (170.2 cm) | (166.4 cm) | (149.9 ст) | (128.9 ст) | (84.8 cm) | (78.4 cm) | (71.4 cm) | (75.2 cm)
12" (1.25 cm)
2%" (6.3 cm)
To ensure proper ventilation for your refrigerator, allow for a %" (1.25 cm) space on
each side and at the top. Allow at least 1" (2.54 cm) between back of cabinet and the
wall. If your refrigerator has an ice maker, make sure you leave some extra space at
the back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 2%" (6.3 cm) minimum
on the hinge side (depending on your model) to allow for the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature ranges
from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room
temperature range for optimum performance, which reduces electricity usage and
provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It Is
recommended that you do not install the refrigerator near a heat source, such as an
oven or radiator.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10597594B
04/17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement