Achim CSTD36WH06 36 in. W x 64 in. L Top Down-Bottom up Honeycomb White Cordless Cellular Shade Installation Guide
Add to my manuals1 Pages
advertisement
Top Down Cordless Honeycomb Cellular Shades
step 1. installing the brackets
inside mount a.
A1
Pencil mark the mounting
screw holes at the top of
the bracket.
Drill holes at the pencil-
marked locations.
Position the brackets near
each end of the head rail.
b.
Dear Customer:
Thank you for purchasing our product. We want to reassure you that our main design focus with window blinds/shades is child safety, and we guarantee this with your new, Top Down Cordless Honeycomb
Cellular Shades. In addition, we hope that you enjoy its ease of use and installation. We look forward to your continued patronage in the future.
Tools needed for installation
1) Metal measuring tape
2) Pencil
3) Phillips screwdrivers
4) Step ladder or stool
5) Drill & bits (1/8 ”)
6) Level
A1
A4
Secure the
brackets with
the mounting
screws
provided.
We hope you enjoy your new purchase!
If you have any questions regarding this product or the instructions
Please call Achim’s Family of Home Furnishings
Customer Service at 1-800-54-ACHIM
Visit our website at www.achimonline.com
Made in Taiwan, Finished in China
V-30
Hardware contents
bracket
(A1) x 2 operation handle
(A2) x 1 (A3) x 1 bottom rail
step 3. assembling the operation handle
Locate the center of the each of the rails. Gentle lift the shade material out of the way. Fasten the top of the handle onto the middle backside of either the bottom or top rail depending on the operation handle.
side view
step 4. operating the shade
A2
Rotate the handle upwards until it snaps into place.
top rail mounting Screw
(1-1/8”)
(A4) x 4 wall Anchor
(A5) x 4
A3
Rotate the handle downwards until it snaps into place.
outside mount a.
A1 b.
A1
To lower shade To raise shade
Pencil mark the mounting
screw holes at the back of
the bracket.
Drill holes at the pencil-
marked locations.
Use level at top of brackets
to ensure straight
alignment. Shade needs to
be level for proper
operation.
A4
Secure the
brackets with the
mounting screws
provided.
When mounting
brackets on wall
board or plaster,
use the wall
anchors provided.
Pull down
Lowering shade:
Simply grasp the center of the bottom rail and pull the shade down to desired length and release.
Push up
Raising shade:
Simply grasp the center of the bottom rail and push it upward to the desired length and release.
Lowering the headrail:
Simply push down on the headrail to lower it to desired position and release.
Raising the headrail:
Simply push up on the headrail to raise it to desired position and release.
step 2. installing the shade
a.
A1
Insert the flange of the top rail onto the top of the bracket as shown in the drawing then snap-in the rear part of the rail onto the tab of the bracket in a twisting motion.
b.
cleaning your shade:
For best results, we suggest using vacuum cleaner or dry cloth to remove dust.
For spot-removal try using light damp cloth to wipe the spot clean. Do not use any kind of chemical to clean the shade as it may damage the shade.
Note: 1. Avoid placing brackets over the spring box or cord pulleys.
2. When installing brackets make sure the brackets do not catch the shade cord(s) against the head rail.
U.S.A Patent No. 6,837,294 & Others Patents Pending
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project