Husky G3600AS-US 36 in. W x 9 in. H x 9 in. D Steel Garage Wall Shelf Use and care guide

Нет # 1001 624 010
Model # G3600AS-US
USE AND CARE GUIDE
36 IN. WALL SHELF
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 5 p.m., EST, Monday - Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Due to continuing improvements,
the actual product may differ slightly
from the product described herein.
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of
this wall shelf. We strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Husky!
Table of Contents
Tableof Contents ..................... 2 Assembly. .................. 3
Safety Information. .................... 2 Coordinating Products. .......... 5
Warranty. . ...................... 2 Maintenance. ................. 5
Specifications. ............._——.—.—.e—o 2 Care and Cleaning. ............... 5
Pre-Installation. ..................... 2 ServiceParts. ................. 5
Safety Information
To reduce the risk of serious injury, read and
follow the safety instructions below before
assembling and using this product.
O This product is intended for indoor use only.
0 This product is not designed for commercial
nor industrial usage.
CAUTION: Any assembly or maintenance
of the product must be carried out by
adults only.
CAUTION: Arrange for necessary
A manpower when assembling, installing
and moving the product.
CAUTION: Check all nuts and bolts
periodically for tightness. When required,
tighten them.
Warranty
WARNING: Keep the product on level
(N suas, The product could become unstable
and it may tip over if stored or moved on an
uneven surface, which may cause personal
injury, death or product damage.
WARNING: This product must be securely
mounted on wall before using.
A WARNING: DO NOT stand on this product.
You may fall which may cause personal injury
or death.
CAUTION: DO NOT leave children
unattended near this product.
This warranty excludes incidental/inconsequential damages and failures due to misuse,
abuse or normal wear and tear. This full warranty gives you specific rights, and you may
also have other rights, which vary state to state.
Contact the customer service team at 1-888-HD-HUSKY or visit www.huskytools.com.
Specifications
Maximum load for shelf
(when distributed evenly)
75 Ibs. / 34 kg
Pre-Installation
TOOLS REQUIRED
Drill
(not included)
Safety Goggles Socket (10 mm)
(not included) (not included)
TA) 6) е====
Level
(not included)
Measuring Tape
(not included)
Gloves
(not included)
Pre-Installation (continued)
HARDWARE INCLUDED
A NOTE: Bolt not shown to actual size.
Part | Description Quantity
AA M6 x 40 hex tapping bolt 2
PACKAGE CONTENTS
A
B \ Part | Description Quanti
~~ p ty
E Back panel 1
A
B Left side panel 1
С Bottom panel 1
D Right side panel 1
E Mounting bracket 1
Assembly
to keep the product from being scratched during assembly.
CAUTION: Please wear gloves during the whole assembling process.
1 ATTACH THE BOTTOM AND BACK PANELS
Attach the bottom panel (C) to the back panel (A) by sliding the back panel's (A)
edge into the groove of the bottom panel(C).
SE
(OI.
—
A NOTE: Assemble on a flat surface. A piece of cardboard is recommended
3 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Assembly (continued) |
2 ATTACH THE SIDE PANELS
Attach the side panels (B & D) to the unit. Slide the bottom panel's (С)
side edges into the grooves of the side panels (B & D).
3 HANG THE WALL SHELF
CAUTION: Make sure the wall shelf is
securely attached to the mounting bracket.
A CAUTION: Use a level to make sure the
/ | À wall shelf is level after installation.
CAUTION: It is recommended to insert
the M6 x 40 hex tapping bolts (AA) into
the studs of the wall. Loading capacity
A will be reduced if the mounting bracket is
not secured to studs, and drywall anchors
(not included) are suggested to use when
the mounting bracket can not be installed
to studs.
may be used for installing a shop light or
” NOTE: Additional holes in bottom panel
other accessories. (sold separately)
0 Fix the mounting bracket (E) on the wall with Holes for hangin
two M6 x40 hex tapping hots (AA) accessories uch as
using a power drill.
a shop light
o Hang the wall shelf onto the mounting
bracket (E).
Make sure the wall shelf is securely attached
to the wall.
Coordinating Products
This product coordinates well with the units below to offer a best storage solution.
They can be combined into various combinations to meet different storage requirements.
Husky 72 in. workbench ©
Maintenance
0 Check all the screws and nuts periodically for tightness. Tighten them when necessary.
Care and Cleaning
O Periodically clean the surfaces with a soft rag and water.
Oo Grease and oil can be removed with most standard cleaning fluids.
For safety, use a nonflammable cleaning fluid.
Service Parts |
A
AR E
Part BR еСНОИ Description Quantity
B
N, | 229813 |Back panel
229811 | Left side panel
229814 | Bottom panel
229812 | Right side panel
226387 | Mounting bracket
| т | ео | о | >
№№) | ==№ | == | == | — | ==
320328 — | Мб х 40 Пех tapping bolt
5 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
<YHUSKY
Questions, problems, missing parts? Before returning to the store,
call Husky Customer Service
8 a.m.-5 p.m., EST, Monday-Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Retain this manual for future use.