dVault DVCS0023-1, DVCS0023-2, DVCS0023-5, DVCS0023-3, DVCS0020-2, DVCS0020-1, DVCS0020-3, DVCS0020-6, DVCS0020-5, DVCS0015-5 Installation guide

dVault DVCS0023-1, DVCS0023-2, DVCS0023-5, DVCS0023-3, DVCS0020-2, DVCS0020-1, DVCS0020-3, DVCS0020-6, DVCS0020-5, DVCS0015-5 Installation guide
dVault Free-standing Collection Units:
Installation Guidelines
DVCS0015, DVCS0020, DVCS0023, DVCS0030
Congratulations on your new dVault parcel collection vault! dVault recommends installing the large
free-standing units on a fully cured concrete pad using wedge-style concrete anchors (not included).
Tools/Materials required for recommended installation:
• (4) 3/8" wedge style concrete anchors and compatible wrench/socket for tightening
• Hammer drill with 3/8" bit
• 20" x 20" minimum cured concrete mounting surface
• Other tools/materials may also be necessary depending upon actual installation.
1. If you are pouring new concrete, follow the concrete manufacturer’s recommendations for pouring
a concrete pad. dVault recommends a thickness of 4"-6" to ensure proper anchor function. Allow
concrete to fully cure before proceeding.
2. Place the dVault unit in the desired position on your concrete pad. Open the bottom access door
and remove the false bottom panel. Mark the locations of the mounting holes on the bottom of the
dVault unit into the concrete pad.
3. Using a hammer drill, drill the mounting holes in the concrete pad. Follow the anchor
manufacturer’s recommendations for depth.
4. Place the dVault unit over the drilled mounting holes and ensure that all holes line up. Install the
wedge anchors and secure.
5. If veneering the unit with brick, stone or other decorative materials, properly prepare all contact
surfaces and use manufacturer recommended adhesives. Surface preparation may include
lightly sanding contact surfaces only until the shine has become dull or prepare a scratch-coat
(contact your materials supplier for proper surface preparation). Do not veneer security-drop/
access door(s) or alter the weight of the door mechanism in any way. Doing so will cause the door
mechanisms to malfunction.
FOR VIDEO LINKS ON POURING CONCRETE AND INSTALLING CONCRETE WEDGE ANCHORS,
VISIT OUR WEBSITE AT www.dvault.com AND NAVIGATE TO YOUR PRODUCT PAGE. CLICK ON
“CONCRETE INSTALLATION VIDEOS” NEAR THE BOTTOM OF THE PAGE
dVault® Companies, Inc. • Secure mail collection solutions. • www.dvault.com • (719) 955-2698 • Fax: (719) 531-5617
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement