JG Speedfit PSFC20N3618E 1/2 in. x 18 in. Stainless Steel Push-Fit x Female Pipe Thread Flexi Hose Water Supply Connector Instructions / Assembly

To Connect

1. Cut the pipe square, removing all burrs and sharp edges.

2. Insert pipe fully into fitting.

3. Turn locking cap quarter turn clockwise to locked position; audible click will be heard; indicator marks will be aligned.

KEEP PRODUCT CLEAN IN A BAG UNTIL READY TO USE.

To Disconnect

1. Depressurize the system.

2. Turn locking cap quarter turn counter clockwise.

3. Depress collet against the fitting and remove pipe.

Tube Stop O-Ring Collet

Support Washer Stainless Steel

Teeth Grip Pipe

AND ARE REGISTERED TRADEMARKS OF JOHN GUEST INTERNTIONAL LIMITED © COPYRIGHT 2016