Y Decor L2096-3-CH Installation guide

Y Decor L2096-3-CH Installation guide
1. Turn off the power.
2. Connect the white wire from wire connector to the white supply wire.
Connect the black wire from wire connector to the black supply wire.
Attach the wire connector to through the cross bar's ground wire with the green Ground screw.
3. Lock the mounting plate on the junction box with the junction box screws.
4.Put the lamp body on the mounting plate and fixed the mounting board with the upper and lower 4PCS screws.
5. The 3PCS iron rods are aligned to three holes in the glass, then fixed to the lamp cup and locked.
Lamp Body
Iron rod
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement