AmeriHome BS103BLKSET Adjustable Height Black Bar Stool (Set of 2) Full Product Manual

AmeriHome BS103BLKSET Adjustable Height Black Bar Stool (Set of 2) Full Product Manual
BS103 / BS103BLK / BS103W
Bar Stool Assembly Instructions
Max Weight Capacity 330 Lb
201302
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer Service at 1-888-287-6981, Monday-Friday,
8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
Handle
Foot Rest
Seat
Support Cylinder
ATTENTION!
Remove Black Cap
Base
Discard Before Assembly
ATTENTION!
ASSEMBLY INSTRUCTION
For proper assembly, follow the instructions.
Remove Black Cap
Discard Before Assembly
A Black Cap protects the hydraulic mechanism on the
Support Cylinder. Remove the Black Cap and discard
it before assembly. The Orange hydraulic button
will become visible.
Insert the thinner end of the Support Cylinder into the
center hole of the Base, and press down FIRMLY.
Screw the Foot Rest onto the bottom of the Seat.
Guide the assembled Support Cylinder and Base into
the hole on the bottom of the Seat and firmly press
down on the Support Column.
To raise and lower the seat, grasp the Handle and pull
upward without applying any weight on the seat. To
lower, raise the handle upward by sitting on the seat.
To disassemble, turn the stool upside down and hit the
metal clip in the center of the bottom of the Base with a
rubber mallet to disengage the locking mechanism. Then,
turn the stool right side up, and lift the Seat
upward, pulling the Seat assembly
off of the Base.
To remove the Seat from the
Support Cylinder, turn the stool
upside down, and gently strike the
edge of the Seat where it meets
the Support Cylinder.
Metal Clip
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement